TY - GEN A1 - Bellenberg, Markus T1 - Optimierung einer Roboter-Schweißzelle als Basis eines E-Learning Systems T1 - Optimization of a Robot-welding Station as the Basis for an E-Learning System N2 - Ziel war die technische Überarbeitung und Optimierung des vorliegenden Prototypen, um eine Basis für ein E-Learning System (Internet unterstütztes Lernen) zu schaffen. Zu diesem Zweck wurde das Programm der Robotersteuerung neu erstellt, notwendige mechanische Änderungen an Roboterequipment und Materialförderung vorgenommen sowie eine neue Internet-Anbindung geschaffen. Wesentliche Ergebnisse der Arbeit sind: • Erzeugen roboterbasierter kreisinterpolierter Bahnschweißnähte • Kommunikation des Lernsystems via Internet • Lernorientierte Steuerungssoftware N2 - The main goal of this final thesis was the revision and optimization of the given prototype as a basis for an E-Learning environment. All components of the system, including specific technical aspects, are discussed in order to create the basis for future training documentation. Similarly, the programs for the robot motion sequences and welding processes were renewed in order to create well-structured, clear and properly documented software that is suitable for use in a formal training program. KW - Roboter KW - MAG-Schweißen KW - MIG-Schweißen KW - Schweißen KW - Mechatronik KW - Kawasaki KW - E-Learning KW - Roboter-Schweißen KW - welding KW - welded joint KW - mechatronics Y1 - 2002 ER - TY - CHAP A1 - Merten, Sabine A1 - Kämper, Klaus-Peter A1 - Brill, Manfred A1 - Picard, Antoni A1 - Cassel, Detlev A1 - Jentsch, Andreas A1 - Rollwa, Markus T1 - Virtuelle Sensor-Fertigung: Hightech mit LabVIEW N2 - Eine neue Generation von Praktika an Hochschulen wächst heran. Moderne Wege beim Verstehen und Erlernen naturwissenschaftlicher Zusammenhänge sowie industrieller Fertigungsprozesse sind gefordert. Das Technologiepraktikum „Virtuelle Sensor- Fertigung“, entwickelt im Verbundprojekt INGMEDIA an den Fachhochschulen Aachen und Zweibrücken, trägt als neuartiges Lern- und Lehrmodul dieser Forderung Rechnung. Die Studierenden lernen einen vollständigen Fertigungsprozess mit Hilfe von virtuellen, in LabVIEW programmierten Maschinen kennen, bevor sie die reale Prozesskette im Reinraum durchführen. N2 - A new generation of university laboratory courses is presently being developed. Modern concepts for the understanding and learning of applied science and industrial fabrication processes are required. The technology course “Fabrication of a microsensor”, developed by the Universities of Applied Sciences Aachen and Zweibrücken in the joint research project INGMEDIA, represents a new approach towards education in high technology production. The students learn the operation of the complex microfabrication line with the help of virtual fabrication machines, programmed in LabVIEW, before they perform the actual process in a genuine clean room. KW - LabVIEW KW - Virtuelle Sensor-Fertigung KW - Fertigungsprozess KW - virtuelle Maschinen KW - virtual sensor fabrication KW - manufacturing process KW - virtual KW - virtual machines Y1 - 2003 ER - TY - JOUR A1 - Kämper, Klaus-Peter A1 - Picard, Antoni A1 - Brill, Manfred A1 - Cassel, Detlev A1 - Jentsch, Andreas A1 - Merten, Sabine A1 - Rollwa, Markus T1 - The Virtual Clean Room - a new tool in teaching MST process technologies N2 - The Virtual Clean Room - a new tool in teaching MST process technologies University education in high-technology fields like MST is not complete without intensive laboratory sessions. Students cannot fully grasp the complexity and the special problems related to the manufacturing of microsystems without a thorough hands-on experience in a MST clean room. KW - Virtuelle Maschine KW - VM KW - Mikrosystemtechnik KW - MST KW - virtual clean room Y1 - 2003 ER - TY - CHAP A1 - Sedlacek, G. A1 - Geßler, A. A1 - Schleser, Markus A1 - Mund, F. A1 - Völling, B. T1 - Verbindungen vorgefertigter Textilbetonbauteile T2 - Textile reinforced structures : proceedings of the 2nd Colloquium on Textile Reinforced Structures (CTRS2), Dresden, Germany, 29.9. - 1.10.2003 Y1 - 2003 SN - 3-86005-386-8 SP - 481 EP - 493 PB - Techn. Univ. CY - Dresden ER - TY - CHAP A1 - Dilger, Klaus A1 - Mund, Frank A1 - Dilthey, Ulrich A1 - Schleser, Markus A1 - Raupach, Michael A1 - Walk-Lauffer, Bernd ED - Curbach, Manfred T1 - Einsatz einer polymeren Phase zur Verbundverbesserung T2 - Textile reinforced structures : proceedings of the 2nd Colloquium on Textile Reinforced Structures (CTRS2), Dresden, Germany, 29.9. - 1.10.2003 Y1 - 2003 SN - 3-86005-386-8 SP - 133 EP - 144 PB - Techn. Univ. CY - Dresden ER - TY - JOUR A1 - Gebhardt, Andreas T1 - Grundlagen des Rapid Prototyping: Eine Kurzdarstellung der Rapid Prototyping Verfahren N2 - Generative Verfahren sind seit etwa 1987 in den USA und seit etwa 1990 in Europa und Deutschland in Form von Rapid Prototyping Verfahren bekannt und haben sich in dieser Zeit von eher als exotisch anzusehenden Modellbauverfahren zu effizienten Werkzeugen für die Beschleunigung der Produktentstehung gewandelt. Mit der Weiterentwicklung der Verfahren und insbesondere der Materialien wird mehr und mehr das Feld der direkten Anwendung der Rapid Technologie zur Fertigung erschlossen. Rapid Technologien werden daher zum Schlüssel für neue Konstruktionssystematiken und Fertigungsstrategien. N2 - Generative procedures have been known under the term of 'rapid prototyping method' for about 18 years in the USA and about 15 years in Europe and Germany. In this time they changed from what was regarded as being a rather exotic way of model construction procedures to a very efficient and useful instrument for faster product manufacturing. In the course of the further development of the methods, and in particular the materials, the field for direct application of rapid technology opens up for manufacturing. Therefore rapid technologies become the key for new construction systematics and manufacturing strategies. KW - Rapid prototyping KW - Laserstrahlsintern KW - 3D-Printing KW - Extrusionsverfahren KW - Gießharzwerkzeuge KW - Laminat Verfahren KW - Lasersintern KW - Stereolithographie KW - Vakuumgießen KW - FLM KW - Fused deposition modelling KW - Laminated-Object-Manufacturing Y1 - 2004 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Lasertechnologie : Laser - Materialbearbeitung ; Grundlagen - Verfahren - Anwendungen N2 - Theoretische Grundlagen, Grundlagen der Materialbearbeitung mit Laserstrahlung, Aufbau und Funktion von Laser-Bearbeitungsanlagen, Laserstrahl-Schneiden, Laserstrahl-Schweißen, Laserstrahl-Bohren, Beschriften und Markieren mit dem Laser, Oberflächenveredeln mit dem Laser, Lasersicherheit, Umweltschutz KW - Laser KW - Materialbearbeitung Y1 - 2005 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Übungsklausur zum Fach Lasertechnologie N2 - Übungsklausur KW - Lasertechnologie KW - Übungsklausur Y1 - 2005 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Lasermesstechnik 1 N2 - Strahlquelle, Verfahren, Triangulation, Interferometrie, Laufzeit, Lidar, Holographie, Speckle, Applikationen, Laseroptische Strömungsmessung, Laser Doppler Velocimetry, Particle Image Velocimetry KW - Lasermesstechnik Y1 - 2005 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Lasermesstechnik 2 N2 - Laser-Doppler-Velozimetrie: Grundlagen, Referenzstrahlverfahren, Kreuzstrahlverfahren, Signalauswertung, Richtungserkennung, Mehrkomponentensysteme, Anwendungen KW - Lasermesstechnik KW - Laseroptische Strömungsmessung KW - Laser-Doppler-Velozimetrie Y1 - 2005 ER -