TY - JOUR A1 - Abbas, Karim A1 - Balc, Nicolae A1 - Bremen, Sebastian A1 - Skupin, Marco T1 - Crystallization and aging behavior of polyetheretherketone PEEK within rapid tooling and rubber molding JF - Journal of Manufacturing and Materials Processing N2 - In times of short product life cycles, additive manufacturing and rapid tooling are important methods to make tool development and manufacturing more efficient. High-performance polymers are the key to mold production for prototypes and small series. However, the high temperatures during vulcanization injection molding cause thermal aging and can impair service life. The extent to which the thermal stress over the entire process chain stresses the material and whether it leads to irreversible material aging is evaluated. To this end, a mold made of PEEK is fabricated using fused filament fabrication and examined for its potential application. The mold is heated to 200 ◦C, filled with rubber, and cured. A differential scanning calorimetry analysis of each process step illustrates the crystallization behavior and first indicates the material resistance. It shows distinct cold crystallization regions at a build chamber temperature of 90 ◦C. At an ambient temperature above Tg, crystallization of 30% is achieved, and cold crystallization no longer occurs. Additional tensile tests show a decrease in tensile strength after ten days of thermal aging. The steady decrease in recrystallization temperature indicates degradation of the additives. However, the tensile tests reveal steady embrittlement of the material due to increasing crosslinking. KW - additive manufacturing KW - fused filament fabrication KW - crystallization KW - polyetheretherketone KW - rapid tooling Y1 - 2022 U6 - http://dx.doi.org/10.3390/jmmp6050093 SN - 2504-4494 N1 - The article belongs to the Special Issue Advances in Injection Molding: Process, Materials and Applications VL - 6 IS - 5 SP - 1 EP - 12 PB - MDPI CY - Basel ER - TY - JOUR A1 - Abbas, Karim A1 - Hedwig, Lukas A1 - Balc, Nicolae A1 - Bremen, Sebastian T1 - Advanced FFF of PEEK: Infill strategies and material characteristics for rapid tooling JF - Polymers N2 - Traditional vulcanization mold manufacturing is complex, costly, and under pressure due to shorter product lifecycles and diverse variations. Additive manufacturing using Fused Filament Fabrication and high-performance polymers like PEEK offer a promising future in this industry. This study assesses the compressive strength of various infill structures (honeycomb, grid, triangle, cubic, and gyroid) when considering two distinct build directions (Z, XY) to enhance PEEK’s economic and resource efficiency in rapid tooling. A comparison with PETG samples shows the behavior of the infill strategies. Additionally, a proof of concept illustrates the application of a PEEK mold in vulcanization. A peak compressive strength of 135.6 MPa was attained in specimens that were 100% solid and subjected to thermal post-treatment. This corresponds to a 20% strength improvement in the Z direction. In terms of time and mechanical properties, the anisotropic grid and isotropic cubic infill have emerged for use in rapid tooling. Furthermore, the study highlights that reducing the layer thickness from 0.15 mm to 0.1 mm can result in a 15% strength increase. The study unveils the successful utilization of a room-temperature FFF-printed PEEK mold in vulcanization injection molding. The parameters and infill strategies identified in this research enable the resource-efficient FFF printing of PEEK without compromising its strength properties. Using PEEK in rapid tooling allows a cost reduction of up to 70% in tool production. KW - polyetheretherketone (PEEK) KW - rapid tooling KW - infill strategy KW - compression behavior KW - additive manufacturing KW - fused filament fabrication Y1 - 2023 U6 - http://dx.doi.org/10.3390/polym15214293 N1 - This article belongs to the Special Issue "Polymer Materials and Design Processes for Additively Manufactured Products" VL - 2023 IS - 15 PB - MDPI CY - Basel ER - TY - JOUR A1 - Abdel-Latif, Lotfie Ahmed A1 - Peeken, Heinz A1 - Benner, Joachim T1 - Thermohydrodynamic analysis of thrust-bearing with circular pads running on bubbly oil (BTHD-theory) JF - Journal of tribology Y1 - 1985 SN - 0742-4787 SN - 1528-8897 VL - 107 IS - 4 SP - 527 EP - 537 ER - TY - JOUR A1 - Abdel-Latif, Lotfie Ahmed A1 - Peeken, Heinz A1 - Benner, Joachim T1 - Термогидродинамический расчет упорных подшипников с круговыми подушками на масляной пленке, содержащей пузырьки газа JF - Проблемы трения и смазки Y1 - 1985 N1 - Russ. Parallelausg. zum gleichzeitig ersch. Titel in der Zeitschr. "Journal of Tribology", 107(1985), 4 VL - 107 IS - 4 SP - 94 EP - 102 ER - TY - JOUR A1 - Ahmed, Essam A1 - Reisgen, Uwe A1 - Schleser, Markus A1 - Mokrov, Oleg T1 - On formability of tailor laser welded blanks of DP/TRIP steel sheets JF - Science and technology of welding and joining N2 - This paper aims to evaluate the formability of tailor welded blanks of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets. In this work, bead on plate butt joints of 2·5 mm DP600 and 1·2 mm TRIP700 steel sheets were performed using CO2 laser beam welding. Microhardness measurements and transverse tensile testing were carried out to characterise the welds. The formability of base metals and welds were investigated by standard Erichsen test. In a perpendicular tensile test to the weld line, all specimens were fractured at the TRIP base metal, and the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of the DP600/TRIP700 steel sheets, and the formability increased with increasing welding speed. Y1 - 2010 U6 - http://dx.doi.org/10.1179/136217110X12731414739754 SN - 1743-2936 VL - 15 IS - 5 SP - 337 EP - 342 PB - Maney CY - Leeds ER - TY - JOUR A1 - Anik, Sabri T1 - Gespritzte Metallbeschichtungen : Eigenschaften lichtbogengespritzter Stahlschichten in Abhängigkeit von einigen Spritzparametern JF - Technische Rundschau : TR ; das Schweizer Industrie-Magazin Y1 - 1978 SN - 0040-148X VL - 70 IS - 26 SP - 9 EP - 13 PB - Medtrix Group CY - Basel ER - TY - JOUR A1 - Anik, Sabri T1 - Gespritzte Metallschichten : Eigenschaften lichtbogengespritzter Stahlschichten in Abhängigkeit von einigen Spritzparametern JF - Technische Rundschau : TR ; das Schweizer Industrie-Magazin Y1 - 1978 SN - 0040-148X VL - 70 IS - 39 SP - 37 EP - 41 PB - Medtrix Group CY - Basel ER - TY - JOUR A1 - Anik, Sabri A1 - Anik, Salahaddin T1 - Stand der Schweißtechnik in der Türkei JF - Schweißen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren Y1 - 1991 SN - 0036-7184 VL - 43 IS - 3 SP - 142 EP - 145 ER - TY - JOUR A1 - Anik, Sabri A1 - Dagsoez, A. K. T1 - Feinbleche schweißen : die Temperaturverteilung in dünnen Stahlblechplatten beim Lichtbogenschweißen JF - Technische Rundschau : TR ; das Schweizer Industrie-Magazin Y1 - 1971 SN - 0040-148X VL - 63 IS - 9 SP - 57 EP - 59 PB - Medtrix Group CY - Basel ER - TY - JOUR A1 - Anik, Sabri A1 - Frohberg, Martin G. T1 - Thermodynamics and solubility of oxygen in liquid copper-lead alloys at 1200°C from E.M.F. measurements JF - Berichte der Bunsengesellschaft für physikalische Chemie Y1 - 1984 SN - 0940-483X SN - 0005-9021 VL - 88 IS - 8 SP - 707 EP - 710 ER - TY - JOUR A1 - Anik, Sabri A1 - Frohberg, Martin G. T1 - Thermodynamics and solubility of oxygen in liquid bismuth-lead and bismuth-antimony alloys JF - Berichte der Bunsengesellschaft für physikalische Chemie Y1 - 1987 SN - 0940-483X SN - 0005-9021 VL - 91 IS - 7 SP - 790 EP - 794 ER - TY - JOUR A1 - Anik, Sabri A1 - Frohberg, Martin G. T1 - Investigations of the thermodynamics of oxygen and the determination of the miscibility gap in the system copper-oxygen-lead at 12000C JF - Zeitschrift für Metallkunde Y1 - 1984 SN - 0044-3093 VL - 75 IS - 8 SP - 586 EP - 589 ER - TY - JOUR A1 - Anik, Sabri A1 - Frohberg, Martin G. T1 - Investigation of the thermodynamics of oxygen and the determination of phase boundaries in the system copper-oxygen-bismuth at 12000C JF - Zeitschrift für Metallkunde Y1 - 1983 SN - 0044-3093 VL - 74 IS - 8 SP - 530 EP - 534 ER - TY - JOUR A1 - Anik, Sabri A1 - Frohberg, Martin G. T1 - Thermodynamics of oxygen in the copper-antimony system at 1473K JF - Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik Y1 - 1988 SN - 0044-2658 VL - 41 IS - 10 SP - 498 EP - 501 ER - TY - JOUR A1 - Anik, Sabri A1 - Frohberg, Martin G. A1 - Kapoor, Madan Lal T1 - Untersuchungen zum thermodynamischen Verhalten des Sauerstoffs in Kupfer-Wismut-Schmelzen bei 1200°C JF - Zeitschrift für Physikalische Chemie Y1 - 1982 SN - 0942-9352 VL - 133 IS - 2 SP - 167 EP - 174 ER - TY - JOUR A1 - Anik, Sabri A1 - Frohberg, Martin G. A1 - Kapoor, Madan Lal T1 - Experiments and theoretical considerations on the solution of oxygen in binary metal alloys JF - Berichte der Bunsengesellschaft für physikalische Chemie Y1 - 1983 SN - 0005-9021 SN - 0940-483X VL - 87 IS - 12 SP - 1201 EP - 1204 ER - TY - JOUR A1 - Anik, Sabri A1 - Frohberg, Martin G. A1 - Kapoor, Madan Lal T1 - Prediction of thermodynamic properties of oxygen in binary metallic solvents JF - Zeitschrift für Metallkunde Y1 - 1983 SN - 0044-3093 VL - 74 IS - 6 SP - 372 EP - 375 ER - TY - JOUR A1 - Anik, Sabri A1 - Kapoor, Madan Lal A1 - Frohberg, Martin G. T1 - Thermodynamic behaviour of oxygen in molten substitutional alloy solvents JF - Zeitschrift für Metallkunde Y1 - 1983 SN - 0044-3093 VL - 74 IS - 1 SP - 53 EP - 58 ER - TY - JOUR A1 - Anik, Sabri A1 - Topuz, A. A1 - Tuncel, H. S. T1 - Einfluß der Parameter beim Diffusionsschweißen der Stähle X210Cr12 mit 25 CrMo4 auf die Ausbildung der Bindezone JF - Schweißen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren Y1 - 1992 SN - 0036 VL - 44 IS - 2 SP - 97 EP - 100 ER - TY - JOUR A1 - Anik, Sabri A1 - Topuz, A. A1 - Tuncel, H. S. T1 - Einfluß der Parameter beim Diffusionsschweißen der Stähle X 210 Cr 12 und 25 MoCr 4 auf ihre mechanischen Eigenschaften JF - Schweißen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren Y1 - 1991 SN - 0036-7184 VL - 43 IS - 6 SP - 341 EP - 344 ER - TY - JOUR A1 - Anik, Sabri A1 - Tuelbentci, K. T1 - Lichtbogenschweißen : Untersuchung der Schweißschlacke und der Wirkungen auf das Entfernen der Schlacke beim Lichtbogenschweißen ; Teil 1 JF - Technische Rundschau : TR ; das Schweizer Industrie-Magazin Y1 - 1973 SN - 0040-148X VL - 65 IS - 48 SP - 13 EP - 15 PB - Medtrix Group CY - Basel ER - TY - JOUR A1 - Anik, Sabri A1 - Tuelbentci, K. T1 - Lichtbogenschweißen : Untersuchung der Schweißschlacke und der Wirkungen auf das Entfernen der Schlacke ; Teil 2 JF - Technische Rundschau : TR ; das Schweizer Industrie-Magazin Y1 - 1973 SN - 0040-148X VL - 65 IS - 52 SP - 9 EP - 13 PB - Medtrix Group CY - Basel ER - TY - JOUR A1 - Anik, Sabri A1 - Tuelbentci, K. T1 - Lichtbogenschweißen : Untersuchung der Schweißschlacke und der Wirkungen auf das Entfernen der Schlacke ; Teil 3 JF - Technische Rundschau : TR ; das Schweizer Industrie-Magazin Y1 - 1974 SN - 0040-148X VL - 66 IS - 2 SP - 43 EP - 47 PB - Medtrix Group CY - Basel ER - TY - JOUR A1 - Baatz, Udo T1 - Neue Aspekte der Integrierten Qualitätssicherung für Automobil - Zulieferer JF - Jahrbuch für Ingenieure Y1 - 1979 PB - Expert-Verl. CY - Grafenau, Zürich ER - TY - JOUR A1 - Baatz, Udo T1 - Erstellung von Einzelteilzeichnungen mittels graphischer Datenverarbeitungsanlagen JF - Konstruktion Y1 - 1972 SN - 0720-5953 VL - 24 IS - 9 SP - 360 EP - 369 PB - VDI Fachmedien CY - Düsseldorf ER - TY - JOUR A1 - Baatz, Udo T1 - Zukaufteile in Maschinenbauprodukten JF - ZWF Zeitschrift für wirtschaftliche Fertigung und Automatisierung N2 - Die technischen und wirtschaftlichen Anforderungen, die heutzutage an moderne Maschinen, Geräte und Apparate gestellt werden, steigen ständig. Immer häufiger sehen sich die Konstrukteure gezwungen, geforderte Funktionen mit Hilfe zugekaufter Normeinzelteile, Bauelemente und Funktionsgruppen zu erfüllen. Bei dieser Entwicklung vergrößert sich die Zahl der von den Spezialherstellern angebotenen Zukaufteile überproportional, in gleichem Maße geht dem Anwender die Übersicht über das Zukaufteilespektrum verloren. Zunächst wird in diesem Bericht diese Entwicklung anhand einer im allgemeinen Maschinenbau durchgeführten Befragung aufgezeigt. Anschließend soll darauf aufbauend ein Ordnungssystem vorgestellt werden, welches jedem Unternehmen wieder eine Übersicht über das am Markt angebotene Zukaufteilespektrum ermöglicht. Y1 - 1972 SN - 0044-3743 U6 - http://dx.doi.org/10.1515/zwf-1972-670603 VL - 67 IS - 6 SP - 301 EP - 310 PB - Hanser CY - München ER - TY - JOUR A1 - Baatz, Udo T1 - Wie erkennt man Rationalisierungsreserven im Konstruktionsbereich JF - Das Jahrbuch für Ingeneure 79 : aktuelles Wissen aus Forschung u. Praxis / Bartz, Wilfried J.; Wippler, Elmar Y1 - 1979 SN - 0171-3809 SP - 263 EP - 268 PB - Expert-Verl. CY - Grafenau, Württ. ER - TY - JOUR A1 - Baatz, Udo T1 - 82.000 FL/h - Eine neue Dimension in der Abfüllung von Erfrischungsgetränken JF - Das Erfrischungsgetränk - Mineralwasser-Zeitung Y1 - 1974 SN - 0342-2232 VL - 27 IS - 14 SP - 341 EP - 345 PB - Matthaes CY - Stuttgart ER - TY - JOUR A1 - Baatz, Udo T1 - Flaschenbehandlung bei hohen Leistungen – Problemstellung und Lösungsmöglichkeiten JF - Das Erfrischungsgetränk - Mineralwasser-Zeitung Y1 - 1974 SN - 0342-2232 VL - 27 IS - 15 SP - 1175 EP - 1178 PB - Matthaes CY - Stuttgart ER - TY - JOUR A1 - Baatz, Udo T1 - Zur Problematik der Etikettenentfernung JF - Das Erfrischungsgetränk - Mineralwasser-Zeitung Y1 - 1974 SN - 0342-2232 N1 - Tagungs-Sondernummer VL - 27 IS - 39 SP - 926 EP - 928 PB - Matthaes CY - Stuttgart ER - TY - JOUR A1 - Baatz, Udo A1 - Butz, Hans-Werner T1 - Rechnerunterstuetztes Konstruieren mit Symbolen JF - TZ für praktische Metallbearbeitung Y1 - 1972 SN - 0177-8900 VL - 66 IS - 9 SP - 366 EP - 370 PB - Grossmann CY - Stuttgart ER - TY - JOUR A1 - Baatz, Udo A1 - Butz, Hans-Werner A1 - Bäck, Karin T1 - Aspekte der Bildschirmprogrammierung im Rahmen des rechnergestützten Konstruierens. Some aspects of CRT-screen programming in computer aided design. JF - eR - Elektronische Rechenanlagen N2 - In den letzten Jahren hat der Einsatz von graphischen Datenverarbeitungsanlagen auf dem technischen, naturwissenschaftlichen und kommerziellen Sektor immer mehr an allgemeinem Interesse und Bedeutung gewonnen. Diese Entwicklung hat neue Aspekte und Probleme in bezug auf Anwendungsmöglichkeiten, Programmierung, Datenstrukturen sowie der Hard- und Software dieser Anlagen hervorgerufen. Zur Zeit werden von verschiedenen Institutionen die Einsatzmöglichkeiten graphischer Datenverarbeitungsanlagen in den Funktionsbereichen Konstruktion und Arbeitsvorbereitung untersucht. Der folgende Beitrag zeigt eine kurze Übersicht über die verschiedenen programmiertechnischen Probleme sowie eine Auswahl von Programmbeispielen, die am Laboratorium für Werkzeugmaschinen und Betriebslehre der RWTH Aachen entwickelt wurden. Bei den Bildschirmsystemen wird zwischen zwei Arten unterschieden. Aktive Bildschirmeinheiten besitzen als äußeres Merkmal einen Lichtstift und eine Funktionstastatur zur Programmverzweigung. Passive Bildschirmeinheiten lassen demgegenüber einen Eingriff in das Programm in der oben aufgeführten Form nicht zu. Zwischen diesen extremen Formen gibt es noch eine Reihe Mischformen. Die in Aachen zur Verfügung stehende Anlage arbeitet aktiv und wird im nachfolgenden Kapitel näher beschrieben. Y1 - 1972 SN - 0013-5720 U6 - http://dx.doi.org/10.1524/itit.1972.14.16.229 VL - 14 IS - 5 SP - 229 EP - 235 PB - Oldenbourg CY - München ER - TY - JOUR A1 - Baatz, Udo A1 - Kehrmann, H. T1 - Neue Produkte - per Zufall oder mit System? JF - Jahrbuch für Führungskräfte Y1 - 1981 PB - Expert-Verl. CY - Grafenau, Zürich ER - TY - JOUR A1 - Baatz, Udo A1 - Opitz, Herwart A1 - Wiendahl, Hans Peter T1 - Bildschirmunterstütztes Konstruieren - Prinziperarbeitung, Gestaltung und Detaillierung mit Hilfe der Menütechnik JF - Industrieanzeiger Y1 - 1970 SN - 0019-9036 VL - 92 IS - 98 SP - 2371 EP - 2374 PB - Konradin CY - Leinfelden-Echterdingen ER - TY - JOUR A1 - Baatz, Udo A1 - Wiendahl, Hans Peter T1 - Methoden des Konstruierens - Übersicht über Geräte, Methoden und Hilfsmittel zur Beseitigung des Engpasses Konstruktion, Teil 1 JF - Grundlagen der Landtechnik N2 - Der Konstruktionsbereich ist zu einem neuen Schwerpunkt der allgemeinen Rationalisierungsbemühungen geworden. Zunehmend führt man organisatorische Hilfsmittel, technische Hilfsmittel (EDVA) und neue Konstruktionsmethoden in der Konstruktion ein. Der vorliegende Beitrag analysiert zunächst die Ursachen dieser Entwicklung und zeigt im weiteren einige heute bereits eingesetzte Hilfsmittel an Hand von Beispielen auf und diskutiert die Anwendungsmöglichkeiten. Y1 - 1971 SN - 0017-4920 VL - 21 IS - 2 SP - 35 EP - 38 PB - VDI-Verlag CY - Düsseldorf ER - TY - JOUR A1 - Baatz, Udo A1 - Wiendahl, Hans Peter T1 - Methoden des Konstruierens - Übersicht über Geräte, Methoden und Hilfsmittel zur Beseitigung des Engpasses Konstruktion, Teil 2 JF - Grundlagen der Landtechnik N2 - Der Konstruktionsbereich ist zu einem neuen Schwerpunkt der allgemeinen Rationalisierungsbemühungen geworden. Zunehmend führt man organisatorische Hilfsmittel, technische Hilfsmittel (EDVA) und neue Konstruktionsmethoden in der Konstruktion ein. Der vorliegende Beitrag analysiert zunächst die Ursachen dieser Entwicklung und zeigt im weiteren einige heute bereits eingesetzte Hilfsmittel an Hand von Beispielen auf und diskutiert die Anwendungsmöglichkeiten. Y1 - 1971 SN - 0017-4920 VL - 212 IS - 3 SP - 77 EP - 80 PB - VDI-Verlag CY - Düsseldorf ER - TY - JOUR A1 - Babilon, Katharina A1 - Wilbring, Daniela A1 - Tappert, Tim A1 - Pfaff, Raphael A1 - Enning, Manfred T1 - Schienenfahrzeugtechnik hands on – FH Aachen IMechE Railway Challenge JF - Ingenieurspiegel Y1 - 2018 SN - 1868-5919 IS - 2 SP - 20 EP - 22 PB - Public Verlag CY - Bingen ER - TY - JOUR A1 - Barth, Heiko A1 - Wollert, Jörg T1 - SMARTes Konzept - von Produkt zur Fabrik JF - Facility-Management : Integration, Planung, Gebäudemanagement Y1 - 1998 SN - 0948-0048 VL - Bd. 4 IS - H. August SP - 30 EP - 35 ER - TY - JOUR A1 - Beckenbach, Isabel A1 - Scheidweiler, Robert T1 - Perfect ƒ-Matchings and ƒ-Factors in Hypergraphs - A Combinatorial Approach JF - Discrete Mathematics N2 - We prove characterizations of the existence of perfect ƒ-matchings in uniform mengerian and perfect hypergraphs. Moreover, we investigate the ƒ-factor problem in balanced hypergraphs. For uniform balanced hypergraphs we prove two existence theorems with purely combinatorial arguments, whereas for non-uniform balanced hypergraphs we show that the ƒ-factor problem is NP-hard. Y1 - 2016 U6 - http://dx.doi.org/10.1016/j.disc.2017.05.005 SN - 2192-7782 N1 - Als Volltext auch bei ZIB (Zuse Institute Berlin) VL - 240 IS - 10 SP - 2499 EP - 2506 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Benner, Joachim T1 - Schwingungsbelastung von drehzahlgeregelten Antrieben mit Stromrichtermotoren JF - Antriebstechnik : Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen ; Organ der Forschungsvereinigung Antriebstechnik e.V. Y1 - 1989 SN - 0341-2652 VL - 28 IS - 12 SP - 49 EP - 54 PB - Vereinigte Fachverl. CY - Mainz ER - TY - JOUR A1 - Berg, Alexander-Karl A1 - Schleser, Markus A1 - Delidovich, Artem A1 - Houben, Alexander T1 - Ultraschallunterstützter Schmelzklebstoffauftrag JF - adhäsion KLEBEN & DICHTEN Y1 - 2018 U6 - http://dx.doi.org/10.1007/s35145-018-0089-z VL - Volume 62 IS - Issue 12 SP - 32 EP - 37 PB - Springer ER - TY - JOUR A1 - Braun, Sebastian A1 - Cheng, Chi-Tsun A1 - Dowey, Steve A1 - Wollert, Jörg T1 - Performance evaluation of skill-based order-assignment in production environments with multi-agent systems JF - IEEE Journal of Emerging and Selected Topics in Industrial Electronics N2 - The fourth industrial revolution introduces disruptive technologies to production environments. One of these technologies are multi-agent systems (MASs), where agents virtualize machines. However, the agent's actual performances in production environments can hardly be estimated as most research has been focusing on isolated projects and specific scenarios. We address this gap by implementing a highly connected and configurable reference model with quantifiable key performance indicators (KPIs) for production scheduling and routing in single-piece workflows. Furthermore, we propose an algorithm to optimize the search of extrema in highly connected distributed systems. The benefits, limits, and drawbacks of MASs and their performances are evaluated extensively by event-based simulations against the introduced model, which acts as a benchmark. Even though the performance of the proposed MAS is, on average, slightly lower than the reference system, the increased flexibility allows it to find new solutions and deliver improved factory-planning outcomes. Our MAS shows an emerging behavior by using flexible production techniques to correct errors and compensate for bottlenecks. This increased flexibility offers substantial improvement potential. The general model in this paper allows the transfer of the results to estimate real systems or other models. KW - cyber-physical production systems KW - event-based simulation KW - multi-agent systems KW - digital factory KW - industrial agents Y1 - 2021 U6 - http://dx.doi.org/10.1109/JESTIE.2021.3108524 SN - 2687-9735 IS - Early Access PB - IEEE CY - New York ER - TY - JOUR A1 - Bucur, Alexandru A1 - Lazarescu, Lucian A1 - Pop, Grigore Marian A1 - Achimas, Gheorghe A1 - Gebhardt, Andreas T1 - Tribological performance of biodegradable lubricants under different surface roughness of tools JF - Academic Journal of Manufacturing Engineering Y1 - 2019 SN - 1583-7904 VL - 17 IS - 1 SP - 172 EP - 178 ER - TY - JOUR A1 - Cosma, Cosmin A1 - Kessler, Julia A1 - Gebhardt, Andreas A1 - Campbell, Ian A1 - Balc, Nicolae T1 - Improving the Mechanical Strength of Dental Applications and Lattice Structures SLM Processed JF - Materials N2 - To manufacture custom medical parts or scaffolds with reduced defects and high mechanical characteristics, new research on optimizing the selective laser melting (SLM) parameters are needed. In this work, a biocompatible powder, 316L stainless steel, is characterized to understand the particle size, distribution, shape and flowability. Examination revealed that the 316L particles are smooth, nearly spherical, their mean diameter is 39.09 μm and just 10% of them hold a diameter less than 21.18 μm. SLM parameters under consideration include laser power up to 200 W, 250–1500 mm/s scanning speed, 80 μm hatch spacing, 35 μm layer thickness and a preheated platform. The effect of these on processability is evaluated. More than 100 samples are SLM-manufactured with different process parameters. The tensile results show that is possible to raise the ultimate tensile strength up to 840 MPa, adapting the SLM parameters for a stable processability, avoiding the technological defects caused by residual stress. Correlating with other recent studies on SLM technology, the tensile strength is 20% improved. To validate the SLM parameters and conditions established, complex bioengineering applications such as dental bridges and macro-porous grafts are SLM-processed, demonstrating the potential to manufacture medical products with increased mechanical resistance made of 316L. Y1 - 2020 U6 - http://dx.doi.org/10.3390/ma13040905 SN - 1996-1944 VL - 13 IS - 4 SP - 1 EP - 18 PB - MDPI CY - Basel ER - TY - JOUR A1 - Dilthey, Ulrich A1 - Brandenburg, Annette A1 - Schleser, Markus T1 - Dispensing and application of unfilled adhesives in the micro range JF - Welding and cutting. 3 (2004), H. 4 Y1 - 2004 SN - 1612-3433 SP - 250 EP - 254 ER - TY - JOUR A1 - Dilthey, Ulrich A1 - Schleser, Markus A1 - Feldmann, Martin A1 - Pak, Daniel A1 - Geßler, Achim T1 - Investigation of punctiform, plane and hybrid joints of textile-reinforced concrete parts JF - Cement and concrete composites Y1 - 2008 SN - 0958-9465 VL - Vol. 30 IS - iss. 2 SP - 82 EP - 87 ER - TY - JOUR A1 - Dilthey, Ulrich A1 - Schleser, Markus A1 - Geßler, Achim A1 - Rettweiler, Timo A1 - Völling, Boris T1 - Kleben textilbewehrter Betonbauteile JF - Schweissen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren. Jg. 57 (2005), Nr. 8 Y1 - 2005 SN - 0036-7184 SP - 373 EP - 377 ER - TY - JOUR A1 - Dilthey, Ulrich A1 - Schleser, Markus A1 - Hanisch, Vera A1 - Gries, Thomas T1 - Garnzugprüfung polymergetränkter Textilien für die Bewehrung von Beton JF - Technische Textilien Y1 - 2006 SN - 0323-3243 VL - 49 IS - 1 SP - 48 EP - 50 ER - TY - JOUR A1 - Dues, M. A1 - Gebhardt, Andreas A1 - Kallweit, Stephan A1 - Scheffler, T. A1 - Siekmann, H. A1 - Uchiyama, T. T1 - Flow Visualization in a Cavitating Flow JF - Proceedings of the German-Japanese Symposium on Multi-Phase Flow : Karlsruhe, Germany, August 23 - 25, 1994 / comp. by U. Müller ... Y1 - 1994 N1 - German Japanese Symposium on Multi-Phase Flow <1994, Karlsruhe> ; Kernforschungszentrum Karlsruhe ; 5389 SP - 391 EP - 402 PB - Kernforschungszentrum Karlsruhe CY - Karlsruhe ER - TY - JOUR A1 - Engeln-Müllges, Gisela T1 - Entartungsbedingungen für Gleitflächennomogramme und Nomographierbarkeitsbedingungen für Fluchtebenennomogramme JF - ZAMM ‐ Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik Y1 - 1982 U6 - http://dx.doi.org/10.1002/zamm.19820620203 SN - 1521-4001 VL - 62 IS - 2 SP - 77 EP - 93 ER - TY - JOUR A1 - Engemann, Heiko A1 - Cönen, Patrick A1 - Dawar, Harshal A1 - Du, Shengzhi A1 - Kallweit, Stephan T1 - A robot-assisted large-scale inspection of wind turbine blades in manufacturing using an autonomous mobile manipulator JF - Applied Sciences N2 - Wind energy represents the dominant share of renewable energies. The rotor blades of a wind turbine are typically made from composite material, which withstands high forces during rotation. The huge dimensions of the rotor blades complicate the inspection processes in manufacturing. The automation of inspection processes has a great potential to increase the overall productivity and to create a consistent reliable database for each individual rotor blade. The focus of this paper is set on the process of rotor blade inspection automation by utilizing an autonomous mobile manipulator. The main innovations include a novel path planning strategy for zone-based navigation, which enables an intuitive right-hand or left-hand driving behavior in a shared human–robot workspace. In addition, we introduce a new method for surface orthogonal motion planning in connection with large-scale structures. An overall execution strategy controls the navigation and manipulation processes of the long-running inspection task. The implemented concepts are evaluated in simulation and applied in a real-use case including the tip of a rotor blade form. KW - mobile manipulation KW - large-scale inspection KW - wind turbine production KW - autonomous navigation KW - surface-orthogonal path planning Y1 - 2021 U6 - http://dx.doi.org/10.3390/app11199271 SN - 2076-3417 N1 - Belongs to the Special Issue "Advances in Industrial Robotics and Intelligent Systems" VL - 11 IS - 19 SP - 1 EP - 22 PB - MDPI CY - Basel ER - TY - JOUR A1 - Engemann, Heiko A1 - Du, Shengzhi A1 - Kallweit, Stephan A1 - Cönen, Patrick A1 - Dawar, Harshal T1 - OMNIVIL - an autonomous mobile manipulator for flexible production JF - Sensors Y1 - 2020 SN - 1424-8220 U6 - http://dx.doi.org/10.3390/s20247249 N1 - Special issue: Sensor Networks Applications in Robotics and Mobile Systems VL - 20 IS - 24, art. no. 7249 SP - 1 EP - 30 PB - MDPI CY - Basel ER - TY - JOUR A1 - Enning, Manfred T1 - Kopplungen ausschalten. Technisch anspruchsvolle Regelungsverfahren vermindern Lageabweichungen bei schnell und genau arbeitenden Robotern. JF - Maschinenmarkt. 98 (1992), H. 46 Y1 - 1992 SN - 0341-5775 SP - 44 EP - 46 ER - TY - JOUR A1 - Enning, Manfred T1 - Grundsätzliche Konzepte bei Lageregelungen für Industrieroboter JF - Maschinenmarkt. 98 (1992), H. 37 Y1 - 1992 SN - 0341-5775 ER - TY - JOUR A1 - Enning, Manfred T1 - Flexcargorail - ein Fahrzeugsystem für effizienten Einzelwagenverkehr / Baier, Martin ; Enning, Manfred JF - Logistik Management. 8 (2006), H. 3 Y1 - 2006 SN - 1436-6231 SP - 28 EP - 42 ER - TY - JOUR A1 - Enning, Manfred T1 - FlexCargoRail – Ohne Diesel in die Letzte Meile JF - Schienenverkehr – sicher, leise, effizient : InnoTrans, Berlin 2008 / Hrsg.: Bundesministerium für Wirtschaft und Technologie, Referat Öffentlichkeitsarbeit Y1 - 2008 N1 - Innovationspolitik, Informationsgesellschaft, Telekommunikation SP - 49 EP - 52 CY - Berlin ER - TY - JOUR A1 - Enning, Manfred T1 - Einzelwagenkonzept für die letzte Meile : „FlexCargoRail“ sieht autarke Fahrten von Waggons mit Rangiergeschwindigkeit vor. Massive Effizienzgewinne locken JF - Deutsche Verkehrs-Zeitung : DVZ / Logistik auf der Schiene (2008) Y1 - 2008 SN - 0342-166X N1 - vom 8.11.2008 ER - TY - JOUR A1 - Enning, Manfred T1 - Vom "König der Landstraße" zur "Ameise 4.0" JF - ETR - Eisenbahntechnische Rundschau N2 - Auf Eisenbahn- und Logistikkonferenzen werden gelegentlich Videos von Blattschneiderameisen gezeigt, die effizient und selbstorganisiert große Mengen Material durch den Dschungel transportieren. Daran sollen wir uns ein Beispiel nehmen. Y1 - 2017 SN - 0013-2845 VL - 66 IS - 1/2 SP - 3 PB - DVV Media Group CY - Hamburg ER - TY - JOUR A1 - Enning, Manfred A1 - Abel, D. A1 - Bollig, A. T1 - Modellfabrik macht Automatisierungstechnik erlebbar / Abel, D. ; Bollig, A. ; Enning, M. JF - RWTH-Themen (2006) Y1 - 2006 SN - 0179-079X SP - 12 EP - 14 ER - TY - JOUR A1 - Enning, Manfred A1 - Baier, M. T1 - Energetic and operational use of FlexCargoRail freight wagons in the single wagon load traffic / Baier, M. ; Enning, M. JF - Towards zero emission : EVS 24, the 24th International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition, Stavanger, Norway, May 13 - 16, 2009 ; symposium proceedings / organised by AVERE ... Robert Stüssi [Hrsg.] Y1 - 2009 N1 - European Association of Electric Road Vehicles ; EVS ; (24 : ; 2009.05.13-16 : ; Stavanger) CY - Stavanger ER - TY - JOUR A1 - Enning, Manfred A1 - Baier, M. A1 - Daniel, A. F. T1 - Fahrzeugtechnische Machbarkeitsstudie eines selbstangetriebenen Güterwagens für das System FlexCargoRail / Baier, M. ; Daniel, A. F. ; Enning, M. JF - ZEVrail : Glasers Annalen ; Zeitschrift für das gesamte System Bahn. 133 (2009), H. 1-2 Y1 - 2009 SN - 1618-8330 SP - 52 EP - 58 PB - Siemens CY - Berlin ER - TY - JOUR A1 - Enning, Manfred A1 - Bernhard, S. A1 - Rake, H. T1 - Flexibles Automatisierungssystem für eine Versuchsanlage zum Gießwalzen von Stahlband / Bernhard, S. ; Enning, M. ; Rake, H. JF - Fachtagung Automatisierung, Inst. für Automatisierungstechnik, Band 6 Y1 - 1992 N1 - Fachtagung Automatisierung, Inst. für Automatisierungstechnik, TU Dresden, D, 20.-21.2.1992 SP - 12 EP - 20 CY - Dresden ER - TY - JOUR A1 - Enning, Manfred A1 - Bernhard, S. A1 - Rake, H. T1 - Automation of a laboratory plant for direct casting of thin steel strips / Bernhard, S. ; Enning, M. ; Rake, H. JF - Control Engineering Practice. 2 (1994), H. 6 Y1 - 1994 SN - 0967-0661 SP - 961 EP - 967 ER - TY - JOUR A1 - Enning, Manfred A1 - Bollig, A. A1 - Mann, S. A1 - Kaierle, S. T1 - Modellgestützte Prädiktive Regelung beim Laserstrahlschweißen / Bollig, A. ; Mann, S. ; Enning, M. ; Kaierle, S. JF - Automatisierungstechnische Praxis : atp. 43 (2001), H. 7 Y1 - 2001 SN - 0178-2320 SP - 35 EP - 39 ER - TY - JOUR A1 - Enning, Manfred A1 - Bollig, A. A1 - Mann, S. A1 - Kaierle, S. T1 - Autonome Produktionszelle für das Laserstrahlschweißen / Bollig, A. ; Mann, S. ; Enning, M. ; Kaierle, S. ; Abel, D. ; Poprawe, R. JF - Automation und Information in Wirtschaft und Gesellschaft : Kongress Baden-Baden, 3. und 4. Juni 2003 / VDI-VDE-Gesellschaft Mess- und Automatisierungstechnik Y1 - 2003 SN - 3-18-091756-3 N1 - GMA-Kongress ; 2003 ; VDI-Berichte 1756 SP - 73 EP - 82 PB - VDI-Verl. CY - Düsseldorf ER - TY - JOUR A1 - Enning, Manfred A1 - Dolls, S. A1 - Brunberg, A. T1 - Selbsteinstellverfahren für Temperiervorrichtungen mit Außenverrohrung / Dolls, S. ; Enning, M. ; Brunberg, A. ; Abel, D. JF - Automation 2009 : Automatisierungskongress in Deutschland ; Kongress Baden-Baden, 16. und 17. Juni 2009 / VDI-VDE-Gesellschaft Mess- und Automatisierungstechnik Y1 - 2009 SN - 978-3-18-092067-2 N1 - Automatisierungskongress <2009, Baden-Baden> ; VDI-Berichte ; 2067 SP - 429 EP - 432 PB - VDI-Verl. CY - Düsseldorf ER - TY - JOUR A1 - Enning, Manfred A1 - Gall, Jan A1 - Abel, Dirk T1 - Modellfabrik im Zeichen der Automatisierungstechnik / Gall, Jan ; Enning, Manfred ; Abel, Dirk JF - Automation 2008 - Lösungen für die Zukunft : der Automatisierungskongress in Deutschland, Tagung Baden-Baden, 3. und 4. Juni 2008 / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik Y1 - 2008 SN - 978-3-18-092032-0 N1 - VDI-Berichte ; 2032 SP - 281 EP - 284 PB - VDI-Verl. CY - Düsseldorf ER - TY - JOUR A1 - Enning, Manfred A1 - Hild, Oliver A1 - Schloßer, Axel A1 - Fieweger, K. T1 - PKW Dieselmotor mit Abgasturboaufladung, variabler Turbinengeometrie, Abgasrückführung / Hild, Oliver ; Schloßer, Axel ; Fieweger, K.; Krüger, M. ; Enning, Manfred ; Deutsch, G. JF - Abgasrückführung : Vorhaben Nr. 124 ; Untersuchungen zur Verminderung der emissionschädlicher Abgaskomponenten durch Abgasrückführung bei schnellaufenden Dieselmotoren unter Einschluß der Abgasturboaufladung / Forschungsvereinigung Verbrennungskraftmaschinen. Y1 - 1998 N1 - Forschungsberichte Verbrennungskraftmaschinen ; R 499 SP - 21 EP - 39 PB - FVV CY - Frankfurt/M. ER - TY - JOUR A1 - Enning, Manfred A1 - Hücker, Jan A1 - Jenayeh, Imad A1 - Rake, Heinrich T1 - A Parametric Identification Scheme for a Self-tuning Industrial Compact Controller - INTERKAMA 1999 / Hucker, Jan ; Jenayeh, Imad ; Enning, Manfred ; Rake, Heinrich Y1 - 1999 N1 - ISA TP99UN139 ; Proceedings ISA-Tech Conference, Düsseldorf 1999 ER - TY - JOUR A1 - Enning, Manfred A1 - Jenayeh, I. A1 - Müller, C. A1 - Kositza, N. T1 - Mechatronics in automating shunting processes in marshalling yards / Jenayeh, I. ; Müller, C.; Kositza, N. ; Enning, M. ; Rake, H. JF - Mechatronics '98 : proceedings of the 6th UK Mechatronics Forum International Conference, Skövde, Sweden, 9-11 September 1998 Y1 - 1998 SN - 0-08-043339-1 N1 - UK Mechatronics Forum International Conference (6 : 1998 : Skövde) PB - Pergamon CY - Amsterdam ER - TY - JOUR A1 - Enning, Manfred A1 - Jenayeh, I. A1 - Müller, C. A1 - Kositza, N. T1 - A New Approach for Automating Shunting Processes in Marshalling Yards / Jenayeh, I.; Müller, C. ; Kositza, N. ; Enning, M. ; Rake, H. JF - Computational Engineering in Systems Applications : 2nd IMACS International Multiconference CESA'98; [abstracts; Nabeul-Hammamet, Tunisia, April 1 - 4, 1998] / ed. by Pierre Borne Y1 - 1998 SP - 338 EP - 343 PB - UCIS CY - Villeneuve d'Ascq ER - TY - JOUR A1 - Enning, Manfred A1 - Jenayeh, I. A1 - Müller, C. A1 - Rake, Heinrich T1 - Development and realization of a manipulator for automatic decoupling of freight cars in marshalling yards / Jenayeh, I. ; Müller, C. ; Enning, Manfred ; Rake, Heinrich ; Peter, J. Y1 - 1997 N1 - World Congress on Railway Research, Florenz, 16.-19.11.1997, 1997 ER - TY - JOUR A1 - Enning, Manfred A1 - Kinoo, B. A1 - Krüger, M. A1 - Schloßer, A. T1 - Turbodiesel fährt umweltfreundlich ins nächste Jahrtausend. Neue Regelungs- und Steuerungsverfahren verbessern Fahrdynamik und Emissionsverhalten / Enning, M. ; Kinoo, B. ; Krüger, M. ; Schloßer, A. JF - RWTH-Themen. 1999 (1999), H. 2 Y1 - 1999 N1 - RWTH-Themen 2/1999: Automobiltechnik SP - 86 EP - 91 ER - TY - JOUR A1 - Enning, Manfred A1 - Kositza, N. A1 - Rake, H. T1 - Modellbildung und Analyse von Schwingungsphänomenen an Kettenkratzförderern / Kositza, N. ; Enning, M. ; Rake, H. JF - Automatisierungstechnik im Spannungsfeld neuer Technologien : Tagung Baden-Baden, 22. und 23. Mai 2001 / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik Y1 - 2001 SN - 3-18-091608-7 N1 - GMA-Kongress ; 2001 SP - 577 EP - 584 PB - VDI-Verl. CY - Düsseldorf ER - TY - JOUR A1 - Enning, Manfred A1 - Mann, S. A1 - Bollig, A. A1 - Kaierle, S. T1 - Autonomous Production Cell for Laser Beam Welding / Mann S. ; Bollig, A. ; Kaierle, S. ; Abel, D. ; Poprawe, R. Y1 - 2003 SN - 0912035757 N1 - ICALEO 2003, Florida ; Laser Materials Processing Conference ; (2003, Jacksonville, Fla.) ; ICALEO ; (22, 2003, Jacksonville, Fla.) PB - LIA CY - Orlando, Fla ER - TY - JOUR A1 - Enning, Manfred A1 - Pfaff, Raphael T1 - Güterwagen 4.0 - Der Güterwagen für das Internet der Dinge. Teil 1: Gesamtsystembetrachtung und grundlegendes Konzept JF - ETR - Eisenbahntechnische Rundschau Y1 - 2017 SN - 0013-2845 VL - 66 IS - 1/2 SP - 12 EP - 16 PB - DVV Media Group CY - Hamburg ER - TY - JOUR A1 - Enning, Manfred A1 - Pischinger, S. A1 - Rake, H. A1 - Krüger, M. T1 - Mehrgrößenregelung beim direkt einspritzenden Pkw-Dieselmotor / Pischinger, S. ; Rake, H. ; Krüger, M. ; Enning, M. ; Fieweger, K. ; Kinoo, B. ; Schloßer, A. JF - Dieselmotorentechnik 2000 : aktueller Stand und Entwicklungstendenzen ; mit 17 Tabellen und 106 Literaturstellen / Michael Bargende. Ulf Essers (Hrsg.) Y1 - 2000 SN - 3-8169-1829-8 N1 - Kontakt & Studium ; 580 SP - 198 EP - 217 PB - Expert-Verl. CY - Renningen-Malmsheim ER - TY - JOUR A1 - Enning, Manfred A1 - Schlosser, A. A1 - Rake, H. A1 - Hild, O. T1 - Echtzeitfähige Simulation eines direkteinspritzenden Dieselmotors / Schlosser, A. ; Rake, H. ; Hild, O. ; Krüger, M. ; Pischinger, S. JF - Simulationstechnik : 12. Symposium in Zürich, September 1998 ; Tagungsband / [Veranstalter: ASIM-Fachausschuss 4.5 Simulation, Gesellschaft für Informatik ...]. Hrsg. von Max Engeli Y1 - 1998 SN - 3728126535 N1 - Fortschritte in der Simulationstechnik ; Symposium Simulationstechnik ; (12, 1998, Zürich) SP - 219 EP - 226 PB - vdf, Hochsch.-Verl. an der ETH CY - Zürich ER - TY - JOUR A1 - Enning, Manfred A1 - Schloßer, A. A1 - Rake, H. A1 - Pischinger, S. T1 - Ladedruck- und Abgasrückführregelung bei direkteinspritzenden Pkw-Dieselmotoren / Schloßer, A. ; Enning, M. ; Rake, H. ; Pischinger, S. JF - 8. Aachener Kolloquium Fahrzeug- und Motorentechnik : 04. - 06. Oktober 1999, Eurogress Aachen / [Hrsg.: VKA, Lehrstuhl für Verbrennungskraftmaschinen Aachen ...] Wiss. Leitung: S. Pischinger ..., Bd. 2 : 6. Oktober 1999 Y1 - 1999 N1 - Aachener Kolloquium Fahrzeug- und Motorentechnik <8, 1999, Aachen> SP - 969 EP - 986 ER - TY - JOUR A1 - Enning, Manfred A1 - Stützle, T. A1 - Viereck, U. T1 - Adaptiver Gleitschutz für Schienenfahrzeuge / Stützle, T. ; Viereck, U. ; Enning, M. ; Rulka, W. ; Stribersky, A. ; Abel, D. JF - Innovations for Europe : VDE-Kongress 2006, 23. - 25. Oktober 2006 in Aachen / Tagungsleiter: W. Schröppel Y1 - 2006 SN - 3-8007-2979-2 SP - 401 EP - 406 PB - VDE-Verl. CY - Berlin ER - TY - JOUR A1 - Enning, Manfred A1 - Stützle, Thorsten A1 - Viereck, Uwe A1 - Stribersky, Anton T1 - Creepage control for use in wheelslide protection systems / Stützle, Thorsten ; Viereck, Uwe ; Stribersky, Anton ; Rulka, Wolfgang ; Enning, Manfred ; Abel, Dirk JF - Control in transportation systems : proceedings of the 11th IFAC symposium on control in transportation systems (CTS 2006), August 29-31, 2006, Delft, the Netherlands / International Federation of Automatic Control Y1 - 2006 SN - 0742-5953 ER - TY - JOUR A1 - Enning, Manfred A1 - Stützle, Thorsten A1 - Viereck, Uwe A1 - Stribersky, Anton T1 - Adaptiver Gleitschutz für Schienenfahrzeuge (Adaptive Wheelslide Protection System for Railway Vehicles) / Stützle, Thorsten ; Viereck, Uwe ; Enning, Manfred ; Stribersky, Anton ; Rulka, Wolfgang JF - at - Automatisierungstechnik . 54 (2006), H. 3 Y1 - 2006 SN - 0178-2312 SP - 139 EP - 148 ER - TY - JOUR A1 - Enning, Manfred A1 - Zambou, N. A1 - Abel, D. T1 - Längsdynamikregelung eines Fahrzeugkonvois mit Hilfe der Modellgestützten Prädiktiven Regelung / Zambou, N. ; Enning, M. ; Abel, D. JF - Telematik 2003 : Tagung Siegen, 17. und 18. Juni 2003 / VDI-VDE-Gesellschaft Mess- und Automatisierungstechnik Y1 - 2003 SN - 3-18-091785-7 N1 - VDI-Berichte ; 1785 SP - 12 S. PB - VDI-Verl. CY - Düsseldorf ER - TY - JOUR A1 - Enning, Manfred A1 - Zambou, N. A1 - Abel, D. T1 - Longitudinal Control of Following Vehicles within Platoon : A Model-Based Predictive Approach / Zambou, N. ; Enning, M. ; Abel, D. JF - Advances in automotive control 2004 : a proceedings volume from the IFAC symposium, Salerno, Italy, 19 - 23 April 2004 / ed. C. Pianese Y1 - 2005 SN - 0080442501 N1 - International Federation of Automatic Control ; Symposium on Advances in Automotive Control ; (4, 2004, Salerno) SP - 733 EP - 738 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Enning, Manfred A1 - Zambou, Nathan A1 - Abel, Dirk T1 - Nonlinear spacing control of following vehicles within platoon a controlled lagrangian approach / Zambou, Nathan ; Enning, Manfred ; Abel, Dirk JF - NOLCOS, IFAC Symposium on Nonlinear Control Systems Y1 - 2004 N1 - NOLCOS, 2004, IFAC Symposium on Nonlinear Control Systems, 6th, Stuttgart, DE, 2004-09-01 - 2004-09-03 SP - 1211 EP - 1216 ER - TY - JOUR A1 - Fateri, Miranda A1 - Gebhardt, Andreas T1 - Selective Laser Melting of Soda-Lime Glass Powder JF - International Journal of Applied Ceramic Technology Y1 - 2015 U6 - http://dx.doi.org/10.1111/ijac.12338 SN - 1744-7402 VL - 12 IS - 1 SP - 53 EP - 61 PB - Wiley-Blackwell CY - Oxford ER - TY - JOUR A1 - Fateri, Miranda A1 - Gebhardt, Andreas T1 - Process Parameters Development of Selective Laser Melting of Lunar Regolith for On-Site Manufacturing Applications JF - International Journal of Applied Ceramic Technology Y1 - 2015 SN - 1744-7402 U6 - http://dx.doi.org/10.1111/ijac.12326 VL - 12 IS - 1 SP - 46 EP - 52 PB - Wiley-Blackwell CY - Oxford ER - TY - JOUR A1 - Fateri, Miranda A1 - Gebhardt, Andreas T1 - Additive manufactured mechanical disentanglement lock JF - RTejournal - Forum für Rapid Technologie Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0009-2-42147 SN - 1614-0923 VL - 12 PB - Fachhochschule Aachen CY - Aachen ER - TY - JOUR A1 - Fateri, Miranda A1 - Gebhardt, Andreas A1 - Thümmler, Stefan A1 - Thurn, Laura T1 - Experimental investigation on selective laser melting of glass JF - Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014 Y1 - 2014 U6 - http://dx.doi.org/10.1016/j.phpro.2014.08.118 SN - 1875-3892 (E-Journal); 1875-3884 (Print) VL - 56 (2014) SP - 357 EP - 364 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Fateri, Miranda A1 - Hötter, Jan-Steffen A1 - Gebhardt, Andreas T1 - Experimental and Theoretical Investigation of Buckling Deformation of Fabricated Objects by Selective Laser Melting JF - Physics Procedia N2 - Although Selective Laser Melting (SLM) process is an innovative manufacturing method, there are challenges such as inferior mechanical properties of fabricated objects. Regarding this, buckling deformation which is caused by thermal stress is one of the undesired mechanical properties which must be alleviated. As buckling deformation is more observable in hard to process materials, silver is selected to be studied theoretically and experimentally for this paper. Different scanning strategies are utilized and a Finite Element Method (FEM) is applied to calculate the temperature gradient in order to determine its effect on the buckling deformation of the objects from experiments. Y1 - 2012 U6 - http://dx.doi.org/10.1016/j.phpro.2012.10.062 SN - 1875-3892 N1 - Part of special issue "Laser Assisted Net shape Engineering 7 (LANE 2012)" VL - 39 SP - 464 EP - 470 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Feldmann, Markus A1 - Pak, Daniel A1 - Geßler, Achim A1 - Dilthey, Ulrich A1 - Schleser, Markus T1 - Bonded connections for textile reinforced concrete structures JF - Cailiao-gongcheng = Journal of materials engineering Y1 - 2006 SN - 1001-4381 IS - Special iss. SP - 123 EP - 127 ER - TY - JOUR A1 - Feldmann, Markus A1 - Pak, Daniel A1 - Geßler, Achim A1 - Schleser, Markus T1 - Entwicklung eines Bemessungsmodells für punktförmige Verbindungen textibewehrter Betonbauteile JF - Bautechnik : Zeitschrift für den gesamten Ingenieurbau Y1 - 2008 SN - 0005-6820, 0341-1052, 0932-6359, 0932-8351, 0932-8351 N1 - Printausg. in der Bibliothek der FH Aachen vorhanden: 13 Z 177 VL - Bd. 85 IS - 2 SP - 143 EP - 147 ER - TY - JOUR A1 - Fiedler, Gerda A1 - Henn, Gudrun A1 - Melcher, Karin T1 - ANPAK - ein semesterbegleitender Anpassungskurs JF - Zeitschrift für Hochschulentwicklung N2 - In Folge mehrjähriger statistischer Untersuchungen an der FH Aachen ist unter anderem ein Eingangstest entstanden, der als Diagnosetool für einen erfolgreichen Studieneinstieg verwendet wird. Es hat sich herausgestellt, dass ein Testergebnis von weniger als 25 (von maximal 56 erreichbaren) Punkten die Chance auf einen erfolgreichen Studieneinstieg deutlich verringert. Ungefähr die Hälfte aller Erstsemester hat weniger als 25 Punkte im Eingangstest. Weniger als 20 % dieser Gruppe bestehen innerhalb eines Jahres die Klausur Mathematik 1. Die investierte Zeit von zwei Semestern ist mit Blick auf den Wissenszuwachs und damit letztendlich den Studienerfolg nicht effizient genutzt. Deshalb haben wir im WS 2013/14 einen semesterbegleitenden Anpassungskurs für diese Gruppe installiert. Ziel eines solchen Kurses ist es, die Student/innen innerhalb eines Jahres in die Lage zu versetzen, nach zwei Semestern problemlos den Vorlesungen in Mathematik zu folgen. Dieser Artikel beschreibt das Konzept dieses Anpassungskurses und zeigt erste Ergebnisse und Probleme des Pilotdurchgangs auf. Y1 - 2014 SN - 2219-6994 VL - 9 IS - 4 SP - 85 EP - 100 PB - ÖGHD CY - Wien ER - TY - JOUR A1 - Fiedler, Jörg A1 - Wollert, Jörg T1 - Zeitmeister : Echtzeitbetriebssysteme für Mikrocontroller JF - ELRAD : Magazin für Elektronik und technische Rechneranwendungen Y1 - 1996 SN - 0170-1827 IS - 2 SP - 55 EP - 59 ER - TY - JOUR A1 - Franko, Josef A1 - Du, Shengzhi A1 - Kallweit, Stephan A1 - Duelberg, Enno Sebastian A1 - Engemann, Heiko T1 - Design of a Multi-Robot System for Wind Turbine Maintenance JF - Energies N2 - The maintenance of wind turbines is of growing importance considering the transition to renewable energy. This paper presents a multi-robot-approach for automated wind turbine maintenance including a novel climbing robot. Currently, wind turbine maintenance remains a manual task, which is monotonous, dangerous, and also physically demanding due to the large scale of wind turbines. Technical climbers are required to work at significant heights, even in bad weather conditions. Furthermore, a skilled labor force with sufficient knowledge in repairing fiber composite material is rare. Autonomous mobile systems enable the digitization of the maintenance process. They can be designed for weather-independent operations. This work contributes to the development and experimental validation of a maintenance system consisting of multiple robotic platforms for a variety of tasks, such as wind turbine tower and rotor blade service. In this work, multicopters with vision and LiDAR sensors for global inspection are used to guide slower climbing robots. Light-weight magnetic climbers with surface contact were used to analyze structure parts with non-destructive inspection methods and to locally repair smaller defects. Localization was enabled by adapting odometry for conical-shaped surfaces considering additional navigation sensors. Magnets were suitable for steel towers to clamp onto the surface. A friction-based climbing ring robot (SMART— Scanning, Monitoring, Analyzing, Repair and Transportation) completed the set-up for higher payload. The maintenance period could be extended by using weather-proofed maintenance robots. The multi-robot-system was running the Robot Operating System (ROS). Additionally, first steps towards machine learning would enable maintenance staff to use pattern classification for fault diagnosis in order to operate safely from the ground in the future. Y1 - 2020 U6 - http://dx.doi.org/10.3390/en13102552 SN - 1996-1073 VL - 13 IS - 10 SP - Article 2552 PB - MDPI CY - Basel ER - TY - JOUR A1 - Franzen, Julius A1 - Pinders, Erik A1 - Pfaff, Raphael A1 - Enning, Manfred T1 - RailCrowd’s virtual fleets: Make most of your asset data JF - Deine Bahn N2 - For smaller railway operators or those with a diverse fleet, it can be difficult to collect sufficient data to improve maintenance programs. At the same time, new rules such as entity in charge of maintenance – ECM – regulations impose an additional workload by requiring a dedicated maintenance management system and specific reports. The RailCrowd platform sets out to facilitate compliance with ECM and similar regulations while at the same time pooling anonymised fleet data across operators to form virtual fleets, providing greater data insights. Y1 - 2018 SN - 0948-7263 IS - 9 SP - 11 EP - 13 PB - Bahn-Fachverlag CY - Berlin ER - TY - JOUR A1 - Frohberg, Martin G. A1 - Anik, Sabri T1 - The calculation of component activities of binary metallic melts from their gas solubilities JF - Zeitschrift für Metallkunde Y1 - 1985 SN - 0044-3093 VL - 76 IS - 2 SP - 135 EP - 137 ER - TY - JOUR A1 - Frohberg, Martin G. A1 - Anik, Sabri T1 - Thermodynamic relations between component activities and gas solubilities in binary metallic systems JF - Berichte der Bunsengesellschaft für physikalische Chemie Y1 - 1985 SN - 0940-483X SN - 0005-9021 VL - 89 IS - 2 SP - 130 EP - 134 ER - TY - JOUR A1 - Frohberg, Martin G. A1 - Anik, Sabri T1 - The application of a quadi-chemical lattice model to binary metallic solvents containing oxygen in higher concentrations JF - Zeitschrift für Metallkunde Y1 - 1983 SN - 0044-3093 VL - 74 IS - 10 SP - 665 EP - 666 ER - TY - JOUR A1 - Frohberg, Martin G. A1 - Anik, Sabri T1 - Über die Voraussetzungen der Wasserstofflöslichkeit in binären Eisenschmelzen JF - Archiv für das Eisenhüttenwesen : Fachberichte Y1 - 1984 SN - 0003-8962 SN - 1611-3683 VL - 55 IS - 2 SP - 45 EP - 48 ER -