TY - CHAP A1 - Kessler, Julia A1 - Balc, Nicolae A1 - Gebhardt, Andreas A1 - Abbas, Karim T1 - Basic research on lattice structures focused on the reliance of the cross sectional area and additional coatings T2 - The 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 – CoSME’16 Y1 - 2017 U6 - http://dx.doi.org/10.1051/matecconf/20179403008 N1 - MATEC Web Conf. Vol 94, 2017, 03008 MATEC Web of Conferences 94, 03008 (2017) ET - Vol. 94 ER - TY - CHAP A1 - Kessler, Julia A1 - Balc, Nicolae A1 - Gebhardt, Andreas T1 - Basic research on lattice structures focused on the strut shape and welding beads T2 - Physics Procedia Y1 - 2016 U6 - http://dx.doi.org/10.1016/j.phpro.2016.08.086 SN - 1875-3884 N1 - Laser Assisted Net Shape Engineering 9th International Conference on Photonic Technologies Proceedings of the LANE 2016 VL - Vol. 83 SP - 833 EP - 838 ER - TY - JOUR A1 - Kessler, Julia A1 - Balc, Nicolae A1 - Gebhardt, Andreas A1 - Abbas, Karim T1 - Basic Research on Lattice Structures Focused on the Tensile Strength JF - Applied Mechanics and Materials Y1 - 2015 U6 - http://dx.doi.org/10.4028/www.scientific.net/AMM.808.193 SN - 1662-7482 N1 - MTeM ; October 14-16, 2015, Cluj-Napoca, Romania VL - Vol. 808 SP - 193 EP - 198 PB - Trans Tech Publications CY - Bäch ER - TY - JOUR A1 - Kampker, Achim A1 - Schleser, Markus A1 - Triebs, Johannes A1 - Berg, Alexander-Karl A1 - Hansen, Jan Ole A1 - Fiedler, Falko T1 - Bauteilintegrierte Vorrichtungsfunktionen im Karosseriebau : Aktuelle Ergebnisse im Forschungsprojekt ProeK JF - ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb N2 - Das Forschungsprojekt Produktionseffizienz in der Kleinserie (ProeK) erarbeitet kostengünstige und effiziente Lösungsansätze für Prozessketten im Zukunftsfeld der Elektromobilität. Das Teilprojekt Karosserie setzt diese Zielsetzung durch innovative und praxisorientierte Produkt- und Prozesskonzepte mit neuartigen bauteilintegrierten Vorrichtungsfunktionen (BiV) um. Im Teilprojekt Außenhaut sollen Toleranzen adaptiv durch Anpassungen der Prozessparameter sowie Bauteilmanipulation kompensiert werden. Y1 - 2018 U6 - http://dx.doi.org/10.3139/104.112012 SN - 0947-0085 VL - 113 IS - 11 SP - 767 EP - 770 PB - De Gruyter CY - Berlin ER - TY - CHAP A1 - Peeken, Heinz A1 - Benner, Joachim T1 - Beeinträchtigung des Druckaufbaus in Gleitlagern durch Schmierstoffverschäumung T2 - Gleit- und Wälzlagerungen : Gestaltung, Berechnung, Einsatz; Tagung Neu-Ulm, 14. und 15. März 1985 / VDI-Ges. Entwicklung, Konstruktion, Vertrieb. - (VDI-Berichte ; 549) Y1 - 1985 SN - 3-18-090549-2 SN - 0083-5560 SP - 373 EP - 397 ER - TY - JOUR A1 - Kämper, Klaus-Peter A1 - Hagemann, B. A1 - Ehrfeld, W. A1 - Lehr, H. T1 - Berechnung und Optimierung von Permanentmagnet-Mikromotoren mit Hilfe der Finite-Elemente-Methode. Hagemann, B.; Ehrfeld, W.; Kämper, K.-P.; Lehr, H.; Michel, F.; Thürigen, C. JF - Simulation mit der Finite-Elemente-Methode in Feinwerk- und Mikrotechnik, München, 12. März. 1996 Y1 - 1996 SP - 1 EP - 13 ER - TY - JOUR A1 - Peeken, Heinz A1 - Benner, Joachim T1 - Berechnung von hydrodynamischen Radial- und Axiallagern JF - Goldschmidt informiert : aus der Arbeit der Th. Goldschmidt AG, Chemische Fabriken Y1 - 1984 SN - 0340-8507 VL - 61 IS - 2 SP - 42 EP - 48 PB - Goldschmidt CY - Essen ER - TY - JOUR A1 - Gauchel, Joachim T1 - Berechnung von Kurvengetrieben mit Gleitbewegung im Kurvengelenk JF - Bewegungstechnik 2008 : Koppelgetriebe, Kurvengetriebe und geregelte Antriebe im Maschinen-, Fahrzeug- und Gerätebau ; Tagung Fulda, 23. und 24. September 2008 / VDI, Entwicklung, Konstruktion, Vertrieb Y1 - 2008 SN - 978-3-18-092050-4 N1 - VDI-Berichte ; 2050 SP - 211 EP - 226 PB - VDI-Verl. CY - Düsseldorf ER - TY - BOOK A1 - Gauchel, Joachim A1 - Dittrich, Günter A1 - Braune, Reinhard T1 - Berechnung von Maschinenschwingungen mit einem programmierbaren Tischrechner Y1 - 1979 SN - 3-531-02822-7 N1 - Forschungsberichte des Landes Nordrhein-Westfalen ; 2822 : Fachgruppe Maschinenbau, Verfahrenstechnik PB - Westdt. Verl. CY - Opladen ER - TY - CHAP A1 - Benner, Joachim T1 - Berechnungsmethoden der Wälzlagerreibung und Einflussgrößen T2 - SMK 2014 : Schweizer Maschinenelemente Kolloquim 25. und 26. November 2014 Y1 - 2014 SN - 978-3-944331-81-2 SP - 151 EP - 170 PB - TUDpress Verl. der Wissenschaften CY - Dresden ER - TY - JOUR A1 - Reichert, Walter T1 - Berufseinstieg für Wirtschaftsingenieure - Bachelor oder Master? JF - Berufsstart Y1 - 2017 ER - TY - JOUR A1 - Pfaff, Raphael A1 - Gidaszewski, Lars A1 - Schmidt, Bernd T1 - Berücksichtigung von No Fault Found im Diagnose- und Instandhaltungssystem von Schienenfahrzeugen JF - ETR - Eisenbahntechnische Rundschau N2 - Intermittierende und nicht reproduzierbare Fehler, auch als No Fault Found bezeichnet, treten in praktisch allen Bereichen auf und sorgen für hohe Kosten. Diese sind häufig auf unpräzise Fehlerbeschreibungen zurückzuführen. Im vorliegenden Beitrag werden Anpassungen der Vorgehensweise bei der Entwicklung und Anpassungen des Diagnosesystems vorgeschlagen. Y1 - 2020 SN - 0013-2845 IS - 5 SP - 56 EP - 59 PB - DVV Media Group CY - Hamburg ER - TY - JOUR A1 - Gebhardt, Andreas A1 - Backes, G. A1 - kramer, T. A1 - Kreutz, E.-W. (u.a.) T1 - Beschichten von Kurbelzapfen mit CO2-Laserstrahlung. Energietechnik JF - Maschinenmarkt. 101 (1995), H. 12 Y1 - 1995 SN - 0341-5775 SP - 42 EP - 45 ER - TY - PAT A1 - Schoene, Jens A1 - Glowania, Michael A1 - Schleser, Markus A1 - Gries, Thomas A1 - Reisgen, Uwe T1 - Betonteil und Verfahren zum Bewehren von Teilen aus Beton / Offenlegungsschrift Y1 - 2011 PB - Dt. Patent- und Markenamt CY - München ER - TY - JOUR A1 - Wingens, Niklas A1 - May, Jörg A1 - Pfaff, Raphael T1 - Betrieblich-technische Innovationsansätze zur Bremsprobe nach einer Prozessänderung JF - Eisenbahntechnische Rundschau : ETR ; Zeitschrift für die gesamte Eisenbahntechnik Y1 - 2019 SN - 0013-2845 IS - 5 PB - DVV Media Group CY - Hamburg ER - TY - JOUR A1 - Wollert, Jörg T1 - Betriebssysteme im Wettlauf : Elan-Entwicklungsboard mit Win CE und QNX JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler Y1 - 1999 SN - 0013-5658 N1 - Printausg. in der Bibliothek vorhanden: 63 ZS 030 VL - Bd. 48 IS - H. 11 SP - 86 EP - 91 ER - TY - BOOK A1 - Baatz, Udo T1 - Bildschirmunterstütztes Konstruieren Y1 - 1973 SN - 3-18-403039-3 N1 - Zugl.: Aachen, Techn. Hochsch., Diss. 1971. - (VDI-Taschenbücher ; T 39) PB - VDI-Verl. CY - Duesseldorf ER - TY - JOUR A1 - Baatz, Udo A1 - Opitz, Herwart A1 - Wiendahl, Hans Peter T1 - Bildschirmunterstütztes Konstruieren - Prinziperarbeitung, Gestaltung und Detaillierung mit Hilfe der Menütechnik JF - Industrieanzeiger Y1 - 1970 SN - 0019-9036 VL - 92 IS - 98 SP - 2371 EP - 2374 PB - Konradin CY - Leinfelden-Echterdingen ER - TY - BOOK A1 - Baatz, Udo T1 - Bildschirmunterstütztes Konstruieren : Funktionsfindung, Prinziperarbeitung, Gestaltung und Detaillierung mit Hilfe graphischer Datenverarbeitungsanlagen Y1 - 1971 N1 - Diss., RWTH Aachen CY - Aachen ER - TY - JOUR A1 - Wollert, Jörg T1 - Bluetooth aktuell - Technik und Anwendungen ; 10: Alternative Technologien JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler Y1 - 2002 SN - 0013-5658 N1 - Printausg. in der Bibliothek vorhanden: 63 ZS 030 VL - Bd. 51 IS - H. 2 SP - 50 EP - 56 ER - TY - JOUR A1 - Wollert, Jörg T1 - Bluetooth aktuell - Technik und Anwendungen ; 1: Die Technik auf einen Blick JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler Y1 - 2001 SN - 0013-5658 N1 - Printausg. in der Bibliothek vorhanden: 63 ZS 030 VL - Bd. 50 IS - H. 17 SP - 80 EP - 84 ER - TY - JOUR A1 - Wollert, Jörg T1 - Bluetooth aktuell - Technik und Anwendungen ; 2: Die Möglichkeiten der Bluetooth-Technik JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler Y1 - 2001 SN - 0013-5658 N1 - Printausg. in der Bibliothek vorhanden: 63 ZS 030 VL - Bd. 50 IS - H. 18 SP - 68 EP - 74 ER - TY - JOUR A1 - Wollert, Jörg T1 - Bluetooth aktuell - Technik und Anwendungen ; 3: Rund um den Bluetooth-Protokollstack JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler Y1 - 2001 SN - 0013-5658 N1 - Printausg. in der Bibliothek vorhanden: 63 ZS 030 VL - Bd. 50 IS - H. 19 SP - 96 EP - 103 ER - TY - JOUR A1 - Wollert, Jörg T1 - Bluetooth aktuell - Technik und Anwendungen ; 4: Der Bluetooth Protokoll-Stack JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler Y1 - 2001 SN - 0013-5658 VL - Jg. 50 IS - Nr. 20 SP - 76 EP - 81 ER - TY - JOUR A1 - Wollert, Jörg T1 - Bluetooth aktuell - Technik und Anwendungen ; 5: Die Bluetooth-Host-Schnittstelle JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler Y1 - 2001 SN - 0013-5658 N1 - Printausg. in der Bibliothek vorhanden: 63 ZS 030 VL - Bd. 50 IS - H. 22 SP - 60 EP - 65 ER - TY - JOUR A1 - Wollert, Jörg T1 - Bluetooth aktuell - Technik und Anwendungen ; 6: Die Bluetooth-Host-Software JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler Y1 - 2001 SN - 0013-5658 N1 - Printausg. in der Bibliothek vorhanden: 63 ZS 030 VL - Bd. 50 IS - H. 23 SP - 50 EP - 57 ER - TY - JOUR A1 - Wollert, Jörg T1 - Bluetooth aktuell - Technik und Anwendungen ; 7: Angepasste Protokolle JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler Y1 - 2001 SN - 0013-5658 N1 - Printausg. in der Bibliothek vorhanden: 63 ZS 030 VL - Bd. 50 IS - H. 24 SP - 66 EP - 72 ER - TY - JOUR A1 - Wollert, Jörg T1 - Bluetooth aktuell - Technik und Anwendungen ; 8: Anwendungs-Profile JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler Y1 - 2001 SN - 0013-5658 N1 - Printausg. in der Bibliothek vorhanden: 63 ZS 030 VL - Bd. 50 IS - H. 25 SP - 66 EP - 73 ER - TY - JOUR A1 - Wollert, Jörg T1 - Bluetooth aktuell - Technik und Anwendungen ; 9: Bluetooth-Systementwicklung JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler Y1 - 2002 SN - 0013-5658 N1 - Printausg. in der Bibliothek vorhanden: 63 ZS 030 VL - Bd. 51 IS - H. 1 SP - 58 EP - 63 ER - TY - JOUR A1 - Wollert, Jörg T1 - Bluetooth im Automobil : derzeitiger Stand der Technik - und was danach kommt JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler ; Sonderh. Elektronik automotive : Magazin für Entwicklungen in der Kfz-Elektronik und Telematik Y1 - 2002 SN - 0013-5658 SN - 1614-0125 N1 - Printausg. in der Bibliothek vorhanden: 63 ZS 030 VL - Bd. 51 IS - Sonderh. Sept. SP - 60 EP - 63 ER - TY - JOUR A1 - Wollert, Jörg T1 - Bluetooth in der Automatisierung : kabelfrei in eine bessere Zukunft JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler Y1 - 2004 SN - 0013-5658 N1 - Printausg. in der Bibliothek vorhanden: 23 Z 263; 63 ZS 030 VL - Bd. 53 IS - H. 14 SP - 42 EP - 46 ER - TY - JOUR A1 - Wollert, Jörg T1 - Bluetooth in der Klemme JF - Computer & Automation : Fachmedium der Automatisierungstechnik Y1 - 2008 SN - 1615-8512 IS - H. 10 SP - 62 EP - 67 ER - TY - CHAP A1 - Wollert, Jörg T1 - Bluetooth in Embedded-Anwendungen in der Automatisierungstechnik T2 - Tagungsband / SPS IPC Drives 2002 : 13. Fachmesse und Kongress, 26. - 28. November 2002 Nürnberg; elektrische Automatisierung - Systeme und Komponenten. (Praxiswissen IEE - Automatisierung) Y1 - 2002 SN - 3-7785-2863-7 SP - 28 EP - 37 PB - Hüthig CY - Heidelberg ER - TY - JOUR A1 - Wollert, Jörg T1 - Bluetooth, WLAN and ZigBee für die Automatisierungstechnik JF - Etz : Elektrotechnik & Automation Y1 - 2004 SN - 0948-7387 N1 - Printausg. in der Bibliothek vorhanden: 23 Z 133; 63 ZS 035 VL - Bd. 125 IS - H. 6 SP - 10 EP - 18 ER - TY - CHAP A1 - Wollert, Jörg T1 - Bluetooth, WLAN und ZigBee für die Automatisierungstechnik T2 - Jahrbuch Elektrotechnik 2006 Y1 - 2005 SN - 978-3-8007-2895-4 SP - 27 EP - 41 PB - VDE Verl. CY - Berlin [u.a.] ER - TY - JOUR A1 - Wollert, Jörg A1 - Vedral, Andreas A1 - Grimm, A. A1 - Holtmann, M. T1 - Bluetooth-Sicherheit : wie viel Persönlichkeit gebe ich preis? JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium für Entwicklungen funkbasierter Systeme Y1 - 2004 SN - 0013-5658 SN - 1611-5120 N1 - Printausg. in der Bibliothek vorhanden: 63 ZS 030; 23 Z 263 VL - Bd. 53 IS - Sonderh. März SP - 30 EP - 35 ER - TY - JOUR A1 - Wollert, Jörg T1 - Bluetooth: Funk für alle(s)? : 10 Jahre Bluetooth: ein Technologie-Über- und -Ausblick JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium für Entwicklungen funkbasierter Systeme Y1 - 2008 IS - Okt. SP - 36 EP - 43 ER - TY - JOUR A1 - Feldmann, Markus A1 - Pak, Daniel A1 - Geßler, Achim A1 - Dilthey, Ulrich A1 - Schleser, Markus T1 - Bonded connections for textile reinforced concrete structures JF - Cailiao-gongcheng = Journal of materials engineering Y1 - 2006 SN - 1001-4381 IS - Special iss. SP - 123 EP - 127 ER - TY - JOUR A1 - Pfaff, Raphael T1 - Braking distance prediction for vehicle consist in low-speed on-sight operation: a Monte Carlo approach JF - Railway Engineering Science N2 - The first and last mile of a railway journey, in both freight and transit applications, constitutes a high effort and is either non-productive (e.g. in the case of depot operations) or highly inefficient (e.g. in industrial railways). These parts are typically managed on-sight, i.e. with no signalling and train protection systems ensuring the freedom of movement. This is possible due to the rather short braking distances of individual vehicles and shunting consists. The present article analyses the braking behaviour of such shunting units. For this purpose, a dedicated model is developed. It is calibrated on published results of brake tests and validated against a high-definition model for low-speed applications. Based on this model, multiple simulations are executed to obtain a Monte Carlo simulation of the resulting braking distances. Based on the distribution properties and established safety levels, the risk of exceeding certain braking distances is evaluated and maximum braking distances are derived. Together with certain parameters of the system, these can serve in the design and safety assessment of driver assistance systems and automation of these processes. KW - Freight rail KW - Shunting KW - Braking curves KW - Brake set-up KW - Driver assistance system Y1 - 2023 U6 - http://dx.doi.org/10.1007/s40534-023-00303-7 SN - 2662-4753 (eISSN) SN - 2662-4745 (Print) VL - 31 IS - 2 SP - 135 EP - 144 PB - SpringerOpen ER - TY - CHAP A1 - Wollert, Jörg T1 - Bussysteme T2 - Handbuch der Mess- und Automatisierungstechnik in der Produktion / Hans-Jürgen Gevatter ... (Hrsg.). - 2. Aufl. Y1 - 2006 SN - 3-540-21207-8 ; 978-3-540-21207-2 SP - 475 EP - 653 PB - Springer CY - Berlin [u.a.] ER - TY - BOOK A1 - Fiedler, Jörg A1 - Wollert, Jörg T1 - C für die Automatisierungspraxis : Grundlagen, Algorithmen, Beispiele Y1 - 1993 SN - 3-18-401320-0 PB - Düsseldorf CY - VDI-Verl. ER - TY - BOOK A1 - Heinrichs, Horst A1 - Weck, M. A1 - Vonderhagen, H. T1 - CAD-Programmbibliothek für Großrechneranlagen Y1 - 1981 N1 - Report: CAD Berichte. Projekt Rechnergestuetztes Entwickeln, Konstruieren und Fertigen; RWTH Aachen CY - Aachen ER - TY - BOOK A1 - Baatz, Udo T1 - CAD/CAM - Compass Maschinenbau. Ein Leitfaden für die optimale Systemauswahl CAD/CNC/CAM/CAE/PPS Y1 - 1993 N1 - CAD Information und Beratung, Jahrbücher 198o - 1993 PB - CADIB CY - Aachen ER - TY - BOOK A1 - Baatz, Udo T1 - CAD/CAM im Maschinenbau - wohin geht der Weg? Y1 - 1985 N1 - ZENIT - Zentrum für Innovation und Technik in NRW0 ; Info 4 CY - Mülheim a.d. Ruhr ER - TY - JOUR A1 - Haag, S. A1 - Zontar, D. A1 - Schleupen, Josef A1 - Müller, T. A1 - Brecher, C. T1 - Chain of refined perception in self-optimizing assembly of micro-optical systems JF - Journal of sensors and sensor systems N2 - Today, the assembly of laser systems requires a large share of manual operations due to its complexity regarding the optimal alignment of optics. Although the feasibility of automated alignment of laser optics has been shown in research labs, the development effort for the automation of assembly does not meet economic requirements – especially for low-volume laser production. This paper presents a model-based and sensor-integrated assembly execution approach for flexible assembly cells consisting of a macro-positioner covering a large workspace and a compact micromanipulator with camera attached to the positioner. In order to make full use of available models from computer-aided design (CAD) and optical simulation, sensor systems at different levels of accuracy are used for matching perceived information with model data. This approach is named "chain of refined perception", and it allows for automated planning of complex assembly tasks along all major phases of assembly such as collision-free path planning, part feeding, and active and passive alignment. The focus of the paper is put on the in-process image-based metrology and information extraction used for identifying and calibrating local coordinate systems as well as the exploitation of that information for a part feeding process for micro-optics. Results will be presented regarding the processes of automated calibration of the robot camera as well as the local coordinate systems of part feeding area and robot base. Y1 - 2014 U6 - http://dx.doi.org/10.5194/jsss-3-87-2014 SN - 2194-878X VL - 3 IS - 1 SP - 87 EP - 95 PB - Copernicus Publ. CY - Göttingen ER - TY - CHAP A1 - Luft, Angela A1 - Gebhardt, Andreas A1 - Balc, Nicolae T1 - Challenges of additive manufacturing in production systems T2 - Modern technologies in manufacturing (MTeM 2019) Y1 - 2019 U6 - http://dx.doi.org/10.1051/matecconf/201929901003 N1 - MATEC Web of Conferences 299; MTeM 2019 VL - 299 IS - Article 01003 ER - TY - JOUR A1 - Pfeiffer, Johann T1 - Chancen im Maschinenbau JF - Fachblatt : Journal der Fachhochschule Aachen . 2002 (2002), H. 1 Y1 - 2002 SP - 2 PB - - ER - TY - JOUR A1 - Hanrath, Wilhelm T1 - Character tables of some factor groups of space groups JF - Perfect groups / Derek F. Holt and W. Plesken Y1 - 1989 SN - 0-19-853559-7 SP - 357 EP - 359 PB - Clarendon Press CY - Oxford ER - TY - JOUR A1 - Mukherjee, Krishnendu A1 - Prahl, Ulrich A1 - Bleck, Wolfgang A1 - Reisgen, Uwe A1 - Schleser, Markus A1 - Abdurakhmanov, Aydemir T1 - Characterization and modelling techniques for gas metal arc welding of DP 600 sheet steels JF - Materialwissenschaft und Werkstofftechnik N2 - The objectives of the present work are to characterize the Gas Metal Arc Welding process of DP 600 sheet steel and to summarize the modelling techniques. The time-temperature evolution during the welding cycle was measured experimentally and modelled with the softwaretool SimWeld. To model the phase transformations during the welding cycle dilatometer tests were done to quantify the parameters for phase field modelling by MICRESS®. The important input parameters are interface mobility, nucleation density, etc. A contribution was made to include austenite to bainite transformation in MICRESS®. This is useful to predict the microstructure in the fast cooling segments. The phase transformation model is capable to predict the microstructure along the heating and cooling cycles of welding. Tensile tests have shown the evidence of failure at the heat affected zone, which has the ferrite-tempered martensite microstructure. Y1 - 2010 U6 - http://dx.doi.org/10.1002/mawe.201000692 SN - 1521-4052 VL - 41 IS - 11 SP - 972 EP - 983 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Mukherjee, Krishnendu A1 - Ramazani, Ali A1 - Yang, Li A1 - Prahl, Ulrich A1 - Bleck, Wolfgang A1 - Reisgen, Uwe A1 - Schleser, Markus A1 - Abdurakhmanov, Aydemir T1 - Characterization of gas metal arc welded hot rolled DP600 steel JF - Steel research international Y1 - 2011 SN - 1869-344X (E-Book); 1611-3683 (Print) VL - Vol. 82 IS - Iss. 12 SP - 1408 EP - 1416 PB - Wiley CY - Weinheim ER - TY - BOOK A1 - Klocke, Martina T1 - CIM, Bedeutung für die Weiterbildung in Klein- und Mittelbetrieben : [Bericht über den EUROTECNET-Workshop "CIM - Bedeutung für die Weiterbildung in Klein- und Mittelbetrieben" vom 16. bis 17. Oktober 1991 in Elmshorn (BR Deutschland)] / [Bericht erstattet von Martina Klocke] Y1 - 1992 N1 - Workshop "CIM - Bedeutung für die Weiterbildung in Klein- und Mittelbetrieben" <1991, Elmshorn> PB - EUROTECNET CY - Brüssel ER - TY - JOUR A1 - Wollbrink, Moritz A1 - Maslo, Semir A1 - Zimmer, Daniel A1 - Abbas, Karim A1 - Arntz, Kristian A1 - Bergs, Thomas T1 - Clamping and substrate plate system for continuous additive build-up and post-processing of metal parts JF - Procedia CIRP N2 - The manufacturing share of laser powder bed fusion (L-PBF) increases in industrial application, but still many process steps are manually operated. Additionally, it is not possible to achieve tight dimensional tolerances or low surfaces roughness. Hence, a process chain has to be set up to combine additive manufacturing (AM) with further machining technologies. To achieve a continuous workpiece flow as basis for further industrialization of L-PBF, the paper presents a novel substrate system and its application on L-PBF machines and post-processing. The substrate system consists of a zero-point clamping system and a matrix-like interface of contact pins to be substantially connected to the workpiece within the L-PBF process. Y1 - 2020 U6 - http://dx.doi.org/10.1016/j.procir.2020.04.015 SN - 2212-8271 VL - 93 SP - 108 EP - 113 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Klocke, Martina T1 - CNC-Technik holt auf bei der Feinbearbeitung / Voelmy, M. JF - VDI-Nachrichten (1981) Y1 - 1981 N1 - vom 18.12.1981. Voelmy, Martina = Geburtsname von Frau Prof. Dr.-Ing. Martina Klocke ER - TY - JOUR A1 - Starke, Günther A1 - Kuhne, A.H. A1 - Frassek, B. T1 - Components for the automated GMAW process. Bestandteile des automatischen Metall-Schutzgas-Schweissverfahrens JF - Welding Journal. 63 (1984), H. 1 Y1 - 1984 SN - 0043-2296 SP - 31 EP - 34 ER - TY - CHAP A1 - Dilthey, Ulrich A1 - Schleser, Markus ED - Barroso de Aguiar, Jose ED - Jalali, Said ED - Camoes, Aires ED - Ferrera, Rui Miguel T1 - Composite improvement of textile reinforced concrete by polymeric impregnation of the textiles T2 - International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimarães, Portugal Y1 - 2006 SN - 972-99179-1-4 SP - 185 EP - 192 PB - Universidade do Minho, Departamento de Engenharia Civil CY - Guimarães ER - TY - CHAP A1 - Pfaff, Raphael A1 - Shahidi, Parham A1 - Enning, Manfred T1 - Connected freight rail rolling stock: a modular approach integrating sensors, actors and cyber physical systems for operational advantages and condition based maintenance T2 - Asia-Pacific Conference of the Prognostics and Health Management Society Y1 - 2017 N1 - Asia-Pacific Conference of the Prognostics and Health Management Society, Jeju, Korea 2017 SP - 1 EP - 7 ER - TY - CHAP A1 - Beer, Stefan A1 - Haidn, O.J. A1 - Willms, Herbert ED - Carvalho, Maria da Graça T1 - Control of stoichiometric propellant supply in an H2/O2-spinning reserve system T2 - Combustion technologies for a clean environment : selected papers from the proceedings of the first international conference, Vilamoura, Portugal, September 3 - 6, 1991. - (Energy, combustion and the environment ;1) Y1 - 1995 SN - 2-88124-619-2 SP - 825 EP - 838 PB - Gordon and Breach CY - Basel [u.a.] ER - TY - CHAP A1 - Wollert, Jörg A1 - Plessmann, K. W. T1 - Controlling processes by operating-point based hybride observers T2 - EUFIT '93 : September 7 - 10, 1993, Eurogress Aachen, Germany, proceedings / First European Congress on Fuzzy and Intelligent Technologies Y1 - 1993 SN - 3-86073-176-9 SP - 1151 EP - 1155 PB - Verl. d. Augustinus Buchh. CY - Aachen ER - TY - JOUR A1 - Enning, Manfred A1 - Stützle, Thorsten A1 - Viereck, Uwe A1 - Stribersky, Anton T1 - Creepage control for use in wheelslide protection systems / Stützle, Thorsten ; Viereck, Uwe ; Stribersky, Anton ; Rulka, Wolfgang ; Enning, Manfred ; Abel, Dirk JF - Control in transportation systems : proceedings of the 11th IFAC symposium on control in transportation systems (CTS 2006), August 29-31, 2006, Delft, the Netherlands / International Federation of Automatic Control Y1 - 2006 SN - 0742-5953 ER - TY - JOUR A1 - Kämper, Klaus-Peter A1 - Schmitt, W. A1 - Güntherodt, G. A1 - Gambino, R. J. T1 - CrO2—A New Half-Metallic Ferromagnet? Kämper, K.-P.; Schmitt, W.; Güntherodt, G.; Gambino, R. J., Ruf, R. JF - Physical Review Letters. 59 (1987), H. 24 Y1 - 1987 SN - 1079-7114 SP - 2788 EP - 2791 ER - TY - JOUR A1 - Abbas, Karim A1 - Balc, Nicolae A1 - Bremen, Sebastian A1 - Skupin, Marco T1 - Crystallization and aging behavior of polyetheretherketone PEEK within rapid tooling and rubber molding JF - Journal of Manufacturing and Materials Processing N2 - In times of short product life cycles, additive manufacturing and rapid tooling are important methods to make tool development and manufacturing more efficient. High-performance polymers are the key to mold production for prototypes and small series. However, the high temperatures during vulcanization injection molding cause thermal aging and can impair service life. The extent to which the thermal stress over the entire process chain stresses the material and whether it leads to irreversible material aging is evaluated. To this end, a mold made of PEEK is fabricated using fused filament fabrication and examined for its potential application. The mold is heated to 200 ◦C, filled with rubber, and cured. A differential scanning calorimetry analysis of each process step illustrates the crystallization behavior and first indicates the material resistance. It shows distinct cold crystallization regions at a build chamber temperature of 90 ◦C. At an ambient temperature above Tg, crystallization of 30% is achieved, and cold crystallization no longer occurs. Additional tensile tests show a decrease in tensile strength after ten days of thermal aging. The steady decrease in recrystallization temperature indicates degradation of the additives. However, the tensile tests reveal steady embrittlement of the material due to increasing crosslinking. KW - additive manufacturing KW - fused filament fabrication KW - crystallization KW - polyetheretherketone KW - rapid tooling Y1 - 2022 U6 - http://dx.doi.org/10.3390/jmmp6050093 SN - 2504-4494 N1 - The article belongs to the Special Issue Advances in Injection Molding: Process, Materials and Applications VL - 6 IS - 5 SP - 1 EP - 12 PB - MDPI CY - Basel ER - TY - RPRT A1 - Wollert, Jörg T1 - DANA - Dynamische Ad-hoc Netzwerke in der Automatisierungstechnik. Schlussbericht. Laufzeit: 01.09.2004 - 30.06.2008 (BMBF-Forschungsbericht; Förderkennzeichen 1714X04) Y1 - 2008 PB - BMBF CY - Berlin ER - TY - BOOK A1 - Wollert, Jörg T1 - Das Bluetooth Handbuch: Technologie, Software, Einsatzfelder, Systementwicklung, Wettbewerb Y1 - 2002 SN - 3-7723-5323-1 PB - Franzis CY - München ER - TY - BOOK A1 - Knepper, Ludger T1 - Das Rolltor : Bauwerköffnungs-Abschlüsse ; Aufbau, Konstruktion, Hinweise zur Berechnung / von Horst Günter Steuff ; unter Mitarb. von Ludger Knepper ; Frieder Thiele Y1 - 1992 SN - 3-8041-3165-4 PB - Werner CY - Düsseldorf ER - TY - JOUR A1 - Starke, Günther T1 - Das Verbundvorhaben 'PROJOIN'. Motivation und Ziele. JF - Qualitätsorientierte Schweißtechnik als Wettbewerbsfaktor : neue Wege für die Fertigung von morgen ; Ergebnisse einer vom BMBF geförderten europäischen Forschungskooperation im Rahmen von EUREKA-FAKTORY] / P. Drews ; G. Köhler (Hrsg.) Y1 - 1999 SN - 3-87155-663-7 N1 - Report SP - 7 EP - 14 PB - DVS-Verl CY - Düsseldorf ER - TY - CHAP A1 - Stieglitz, Kristian A1 - Wollert, Jörg T1 - Database driven modernization and expansion of storage systems T2 - Proceedings : the 3rd International Multi-Conference on Engineering and Technological Innovation : June 29th - July 2nd, 2010, Orlando, Florida, USA ; vol. 2 Y1 - 2010 SN - 978-1-936338-03-0 SP - 180 EP - 183 PB - IIIS CY - Winter Garden, Fla. ER - TY - JOUR A1 - Pfaff, Raphael A1 - Schmidt, Bernd T1 - Daten in der Cloud - und dann? JF - Deine Bahn N2 - Schienenverkehrssysteme stehen in zunehmendem Wettbewerb, sowohl untereinander als auch mit anderen Verkehrsträgern. Als wichtiger Aspekt zur Steigerung der Kosteneffizienz wird die Digitalisierung des Betriebs und der Fahrzeuge betrachtet. Über eine Prognose der Ausfallwahrscheinlichkeit bzw. Restlebensdauer von Subsystemen können mittels Digitalisierung die Instandhaltungskosten gesenkt werden. Die geringen Fehlerraten im System Bahn machen die Nutzung besonderer Simulationstechniken notwendig. In diesem Beitrag wird gezeigt, wie sich die Subsystemverfügbarkeit aus den beobachteten Fehlerraten der Teilfunktionen vorhersagen lässt. Y1 - 2016 SN - 0948-7263 IS - 6 SP - 50 EP - 55 PB - Bahn-Fachverlag CY - Berlin ER - TY - JOUR A1 - Grundmann, Reinhard A1 - Kramer, C. A1 - Konrath, B. T1 - Der Aeroakustik-Fahrzeugwindkanal von Ford. JF - Automobiltechnische Zeitschrift - ATZ. 103 (2001), H. 10 Y1 - 2001 SN - 0001-2785 SP - 932 EP - 938 ER - TY - JOUR A1 - Grundmann, Reinhard A1 - Bommes, Leonhard A1 - Klaes, Klaus A1 - Kramer, Carl u.a. T1 - Der Einfluß der Schaufelgestalt von Zentrifugallüftern auf deren Leistung und Geräuschpegel JF - Noise Control Engineering Journal. 43 (1995), H. 4 Y1 - 1995 SN - 0736-2501 SP - 91 EP - 101 ER - TY - JOUR A1 - Wollert, Jörg T1 - Der Embedded Wireless-Report JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium für Entwicklungen funkbasierter Systeme Y1 - 2014 SN - 0013-5658 SP - 18 EP - 25 PB - WEKA-Fachmedien CY - Haar ER - TY - JOUR A1 - Knepper, Ludger T1 - Der moderne Luftfrachtverkehr - leistungsfaehig durch seine bodengebundenen Umschlagssysteme Y1 - 1985 N1 - Konferenzeinzelbericht : Transmatik 85. Kongress Neue Technologien im Materialfluss und in der Foerdertechnik, Univ. Karlsruhe, 10.-12.5.1985 SP - 60 EP - 69 ER - TY - CHAP A1 - Reichert, Walter T1 - Der Vertriebsingenieur: Ausbildung und Beruf T2 - Berufsstart Technik : das Karriereportal für junge Akademiker ; Ingenieure, Naturwissenschaftler, Informatiker Y1 - 2014 SP - 456 EP - 458 PB - Resch CY - Großenkneten ER - TY - JOUR A1 - Grundmann, Reinhard T1 - Design Criteria for Aeroacoustic Wind Tunnels Y1 - 1992 N1 - Konferenzeinzelbericht : DGLR-workshop : Joint meeting of the Specialists Groups Test Facilities/Aeroacoustics - Flight Noise . Deutsche Gesellschaft für Luft- und Raumfahrt. Test Facilities Specialist Group ; Deutsche Gesellschaft für Luft- und Raumfahr ER - TY - JOUR A1 - Franko, Josef A1 - Du, Shengzhi A1 - Kallweit, Stephan A1 - Duelberg, Enno Sebastian A1 - Engemann, Heiko T1 - Design of a Multi-Robot System for Wind Turbine Maintenance JF - Energies N2 - The maintenance of wind turbines is of growing importance considering the transition to renewable energy. This paper presents a multi-robot-approach for automated wind turbine maintenance including a novel climbing robot. Currently, wind turbine maintenance remains a manual task, which is monotonous, dangerous, and also physically demanding due to the large scale of wind turbines. Technical climbers are required to work at significant heights, even in bad weather conditions. Furthermore, a skilled labor force with sufficient knowledge in repairing fiber composite material is rare. Autonomous mobile systems enable the digitization of the maintenance process. They can be designed for weather-independent operations. This work contributes to the development and experimental validation of a maintenance system consisting of multiple robotic platforms for a variety of tasks, such as wind turbine tower and rotor blade service. In this work, multicopters with vision and LiDAR sensors for global inspection are used to guide slower climbing robots. Light-weight magnetic climbers with surface contact were used to analyze structure parts with non-destructive inspection methods and to locally repair smaller defects. Localization was enabled by adapting odometry for conical-shaped surfaces considering additional navigation sensors. Magnets were suitable for steel towers to clamp onto the surface. A friction-based climbing ring robot (SMART— Scanning, Monitoring, Analyzing, Repair and Transportation) completed the set-up for higher payload. The maintenance period could be extended by using weather-proofed maintenance robots. The multi-robot-system was running the Robot Operating System (ROS). Additionally, first steps towards machine learning would enable maintenance staff to use pattern classification for fault diagnosis in order to operate safely from the ground in the future. Y1 - 2020 U6 - http://dx.doi.org/10.3390/en13102552 SN - 1996-1073 VL - 13 IS - 10 SP - Article 2552 PB - MDPI CY - Basel ER - TY - BOOK A1 - Pfeiffer, Johann T1 - Design und Herstellen von Werkzeugen mit Freiformflächen Y1 - 1997 N1 - Abschlussbericht K2-Forschungsvorhaben der Fachhochschule Aachen, Fachbereich Maschinenbau und Mechatronik, Lehrgebiet Integrierte Qualitätssicherung und Automatisierungstechnik ; in Zus.-Arb. mit der Technischen Univ. Nizhniy Novgorod, Russische Föderation PB - Fachhochsch. CY - Aachen ER - TY - CHAP A1 - Hartmann, Axel A1 - Kallweit, Stephan A1 - Feldusen, Antje A1 - Schröder, Wolfgang T1 - Detection of upstream propagating sound waves at buffet flow using high-speed PIV BT - 16th International Symposium on Applications of Laser Techniques to Fluid Mechanics ; 9th to 12th July 2012 Lisbon, Portugal Y1 - 2012 N1 - Aerodynamisches Institut ; International Symposium on Applications of Laser Techniques to Fluid Mechanics <16, 2012, Lissabon> ER - TY - CHAP A1 - Schleupen, Josef A1 - Engemann, Heiko A1 - Bagheri, Mohsen A1 - Kallweit, Stephan A1 - Dahmann, Peter T1 - Developing a climbing maintenance robot for tower and rotor blade service of wind turbines T2 - Advances in Robot Design and Intelligent Control : Proceedings of the 25th Conference on Robotics in Alpe-Adria-Danube Region (RAAD16) Y1 - 2017 SN - 978-3-319-49058-8 U6 - http://dx.doi.org/10.1007/978-3-319-49058-8_34 N1 - Advances in Robot Design and Intelligent Control ; Vol. 540 SP - 310 EP - 319 PB - Springer CY - Cham ER - TY - CHAP A1 - Vedral, Andreas A1 - Kruse, Thomas A1 - Wollert, Jörg T1 - Development and performance evaluation of an antenna diversity module for industrial communication based on IEEE 802.15.4 T2 - 12th IEEE International Conference on Emerging Technologies and Factory Automation : ETFA 2007 : proceedings : 25-28 Sept. 2007, Patras, Greece Y1 - 2007 SN - 1424408261 ; 9781424408269 U6 - http://dx.doi.org/10.1109/EFTA.2007.4416769 SP - 177 EP - 186 PB - IEEE CY - Piscataway, NJ ER - TY - JOUR A1 - Enning, Manfred A1 - Jenayeh, I. A1 - Müller, C. A1 - Rake, Heinrich T1 - Development and realization of a manipulator for automatic decoupling of freight cars in marshalling yards / Jenayeh, I. ; Müller, C. ; Enning, Manfred ; Rake, Heinrich ; Peter, J. Y1 - 1997 N1 - World Congress on Railway Research, Florenz, 16.-19.11.1997, 1997 ER - TY - JOUR A1 - Starke, Günther A1 - Drews, P. T1 - Development approaches for advanced control in automated arc welding Y1 - 1985 N1 - Konferenz-Einzelbericht: Automation and robotisation in welding and allied processes. International conference on automation and robotisation in welding and allied processes, Strasbourg, FR, 02.09.1985-03.09.1985 SP - 115 EP - 124 ER - TY - JOUR A1 - Kämper, Klaus-Peter T1 - Development of low-cost injection moulded micropumps. Entwicklung von kostengünstigen, mittels Spritzguß hergestellten Mikropumpen / Döpper, J. (u.a.) JF - Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH Y1 - 1996 N1 - Konferenz-Einzelbericht: ACTUATOR, Internat. Conf. on New Actuators, 5 SP - 37 EP - 40 CY - Bremen ER - TY - JOUR A1 - Kämper, Klaus-Peter A1 - Lehr, H. A1 - Ehrfeld, W. A1 - Hagemann, B. T1 - Development of micro and millimotors. Lehr, H.; Ehrfeld, W.; Hagemann, B.; Kämper, K.-P.; Michel, F.; Schulz, C.; Thürigen C. JF - Minimally Invasive Therapy and Allied Technologies. 6 (1997) Y1 - 1997 SN - 1364-5706 ER - TY - CHAP A1 - Vedral, Andreas A1 - Wollert, Jörg T1 - Die Analyse industrieller funkgestützter Kommunikationskanäle T2 - Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2006, Fachmesse & Kongress, 28. - 30. Nov. 2006, Nürnberg Y1 - 2006 SN - 9783800729944 SP - 279 EP - 288 PB - VDE-Verl. CY - Berlin ER - TY - JOUR A1 - Kämper, Klaus-Peter A1 - Picard, A. A1 - Schütze, A. T1 - Die Ausbildungsfoundry pro-mst und das virtuelle Technologielabor: Ein Konzept für eine exzellente praktische MST-Ausbildung in einem modernen Reinraum zu niedrigen Gesamtkosten. Picard, A.; Kämper, K.-P.; Schütze, A. JF - Mikrosystemtechnik-Kongress 2005 : 10. bis 12. Oktober 2005 in Freiburg ; gemeinsame Veranstaltung von: Bundesministerium für Bildung und Forschung (BMBF) ... / organisiert von: GMM VDE/VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik ... Chairman: Roland Zengerle Y1 - 2005 SN - 3-8007-2926-1 N1 - Mikrosystemtechnik-Kongress <2005, Freiburg, Breisgau> SP - 127 PB - VDE-Verl. CY - Berlin ER - TY - JOUR A1 - Pleßmann, K. W. A1 - Wollert, Jörg A1 - Fiedler, Jörg T1 - Die ganzheitliche und objektorientierte Prozesssteuerung - eine Vision? JF - CIM-Management : Produkte, Strategien, Entscheidungshilfen Y1 - 1995 SN - 0179-2679 VL - 11 IS - 2 SP - 56 EP - 60 ER - TY - BOOK A1 - Gauchel, Joachim A1 - Dittrich, Günter T1 - Die kinematische Analyse von mehrgliedrigen ebenen Kurbelgetrieben sowie die Synthese von sechgliedrigen Kurbelgetrieben zur Gliedlagenerfüllung : Bericht d. Inst. für Getriebetechnik u. Maschinendynamik d. Rhein.-Westf. Techn. Hochsch. Aaachen Y1 - 1985 N1 - Serie Fortschritt-Berichte VDI : 1 ; 132 PB - VDI-Verl. CY - Düsseldorf ER - TY - JOUR A1 - Wollert, Jörg A1 - Kruse, Thomas A1 - Vedral, Andreas T1 - Die Kraft der drei Antennen : zuverlässige Funkkommunikation für die Automatisierungstechnik JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium für Entwicklungen funkbasierter Systeme Y1 - 2007 SN - 0013-5658; 1611-5120 N1 - Printausgabe in der Bibliothek vorhanden: 23 Z 133; 63 ZS 035 VL - 56 IS - Sonderh. 2 SP - 36 EP - 42 ER - TY - JOUR A1 - Wollert, Jörg T1 - Die Kunst des Weglassens : Windows NT Embedded - Was die neue Version vom Standard-NT unterscheidet JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler Y1 - 1999 SN - 0013-5658 N1 - Printausg. in der Bibliothek vorhanden: 63 ZS 030 VL - Bd. 48 IS - H. 23 SP - 116 EP - 121 ER - TY - JOUR A1 - Kämper, Klaus-Peter T1 - Die Mikroaktorik wird erwachsen JF - INNO : innovative Technik - neue Anwendungen / Hrsg.: IVAM Fachverband für Mikrotechnik, Dortmund. Ausgabe 22 (2002) Y1 - 2002 SP - 4 EP - 5 ER - TY - JOUR A1 - Pfaff, Raphael A1 - Enning, Manfred T1 - Die nachhaltige Alternative zum autonomen Lastwagen JF - Deine Bahn Y1 - 2017 IS - 10 SP - 22 EP - 26 ER - TY - JOUR A1 - Wollert, Jörg T1 - Die nächste "Generation Wireless" : Kommunikation mit hoher Bandbreite wird mobil JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium für Entwicklungen funkbasierter Systeme Y1 - 2005 SN - 0013-5658 ; 1611-5120 N1 - Printausgabe in der Bibliothek vorhanden: 23 Z 263; 63 ZS 030 IS - H. 2 SP - 40 EP - 44 ER - TY - JOUR A1 - Wollert, Jörg T1 - Die Produktionslogistik der Front- und Heckmodule für die Smart-Montage in Hambach JF - Logistik für Unternehmen : das Fachmagazin der internen und externen Logistik Y1 - 1998 SN - 0930-7834 N1 - Printausg. in der Bibliothek vorhanden: 43 Z 513 SP - 48 EP - 51 ER - TY - JOUR A1 - Klocke, Martina T1 - Die Situation von Ingenieurinnen in Europa - ein Ländervergleich JF - Neue Impulse (1995) Y1 - 1995 SN - 0943-4240 SP - 7 EP - 16 ER - TY - JOUR A1 - Klocke, Martina T1 - Die Situation von Ingenieurinnen in Europa - ein Ländervergleich JF - Berufsziel: Ingenieurin : Aufbruch in die/der Technik / hrsg. von Renate Kosuch Y1 - 1996 SN - 3-89271-645-5 SP - 26 EP - 38 PB - Deutscher Studien-Verl. CY - Weinheim ER - TY - JOUR A1 - Frohberg, Martin G. A1 - Anik, Sabri T1 - Die Vorausbestimmung der Stickstofflöslichkeit in binären Eisenschmelzen JF - Archiv für das Eisenhüttenwesen : Fachberichte Y1 - 1984 SN - 0003-8962 SN - 1611-3683 VL - 55 IS - 8 SP - 365 EP - 367 ER - TY - JOUR A1 - Thomas, Axel T1 - Die Wiederbelebung der Mitarbeiterwohnungsidee bei kommunalen Unternehmen JF - VM Verwaltung und Management Y1 - 2019 U6 - http://dx.doi.org/10.5771/0947-9856-2019-6-286 SN - 0947-9856 VL - 25 IS - 6 SP - 286 EP - 291 PB - Nomos-Verl.-Ges. CY - Baden-Baden ER - TY - CHAP A1 - Ulmer, Jessica A1 - Mostafa, Youssef A1 - Wollert, Jörg T1 - Digital Twin Academy: From Zero to Hero through individual learning experiences T2 - Tagungsband AALE 2022 / Herausgegeben von der Hochschule für Technik, Wirtschaft und Kultur Leipzig N2 - Digital twins are seen as one of the key technologies of Industry 4.0. Although many research groups focus on digital twins and create meaningful outputs, the technology has not yet reached a broad application in the industry. The main reasons for this imbalance are the complexity of the topic, the lack of specialists, and the unawareness of the twin opportunities. The project "Digital Twin Academy" aims to overcome these barriers by focusing on three actions: Building a digital twin community for discussion and exchange, offering multi-stage training for various knowledge levels, and implementing realworld use cases for deeper insights and guidance. In this work, we focus on creating a flexible learning platform that allows the user to select a training path adjusted to personal knowledge and needs. Therefore, a mix of basic and advanced modules is created and expanded by individual feedback options. The usage of personas supports the selection of the appropriate modules. KW - Digital Twins KW - Knowledge Transfer KW - Training Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bsz:l189-qucosa2-776097 SN - 978-3-910103-00-9 N1 - Konferenz: 18. AALE-Konferenz. Pforzheim, 09.03.-11.03.2022 This cross-border research was conducted in frame of the Interreg Euregio Meuse-Rhine project Digital Twin Academy, funded by the European Regional Development Fund of the European Union. SP - 1 EP - 9 ER - TY - GEN A1 - Gebhardt, Andreas T1 - Digitale Regelungstechnik N2 - Grundlagen (Prinzip, Komponenten, Abtastung, Aliasing) Algorithmus (Implementierung, Pseudo Code, Ermittlung der Faktoren) Beispiel KW - Digitale Regelungstechnik Y1 - 2005 ER - TY - BOOK A1 - Pfeiffer, Johann A1 - Knepper, Ludger T1 - Diplom Ingenieur/Diplom Ingenieurin (Fachhochschule) Maschinenbau Konstruktionstechnik Y1 - 1998 N1 - Blätter zur Berufskunde 2-IP 30 / hrsg. von der Bundesanst. für Arbeit Nürnberg. - 8. Aufl. PB - Bertelsmann CY - Bielefeld ER - TY - BOOK A1 - Knepper, Ludger A1 - Pfeiffer, Johann T1 - Diplom-Ingenieur / Diplom-Ingenieurin (Fachhochschule) Maschinenbau, Energie- und Wärmetechnik Y1 - 1999 N1 - Blätter zur Berufskunde 2-IP 41 / hrsg. von der Bundesanst. für Arbeit Nürnberg PB - Bertelsmann CY - Bielefeld ER -