TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Lehr, H.
A1  - Ehrfeld, W.
A1  - Hagemann, B.
T1  - Development of micro and millimotors. Lehr, H.; Ehrfeld, W.; Hagemann, B.; Kämper, K.-P.; Michel, F.; Schulz, C.; Thürigen C.
JF  - Minimally Invasive Therapy and Allied Technologies. 6 (1997)
Y1  - 1997
SN  - 1364-5706
ER  - 
TY  - CHAP
A1  - Ulmer, Jessica
A1  - Mostafa, Youssef
A1  - Wollert, Jörg
T1  - Digital Twin Academy: From Zero to Hero through individual learning experiences
T2  - Tagungsband AALE 2022 / Herausgegeben von der Hochschule für Technik, Wirtschaft und Kultur Leipzig
N2  - Digital twins are seen as one of the key technologies of Industry 4.0. Although many research groups focus on digital twins and create meaningful outputs, the technology has not yet reached a broad application in the industry. The main reasons for this imbalance are the complexity of the topic, the lack of specialists, and the unawareness of the twin opportunities. The project "Digital Twin Academy" aims to overcome these barriers by focusing on three actions: Building a digital twin community for discussion and exchange, offering multi-stage training for various knowledge levels, and implementing realworld use cases for deeper insights and guidance. In this work, we focus on creating a flexible learning platform that allows the user to select a training path adjusted to personal knowledge and needs. Therefore, a mix of basic and advanced modules is created and expanded by individual feedback options. The usage of personas supports the selection of the appropriate modules.
KW  - Digital Twins
KW  - Knowledge Transfer
KW  - Training
Y1  - 2022
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bsz:l189-qucosa2-776097
SN  - 978-3-910103-00-9
N1  - Konferenz: 18. AALE-Konferenz. Pforzheim, 09.03.-11.03.2022

This cross-border research was conducted in frame of the Interreg Euregio Meuse-Rhine project Digital Twin Academy, funded by the European Regional Development Fund of the European Union.
SP  - 1
EP  - 9
ER  - 
TY  - JOUR
A1  - Dilthey, Ulrich
A1  - Brandenburg, Annette
A1  - Schleser, Markus
T1  - Dispensing and application of unfilled adhesives in the micro range
JF  - Welding and cutting. 3 (2004), H. 4
Y1  - 2004
SN  - 1612-3433
SP  - 250
EP  - 254
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
T1  - Education and Training in MST. Kämper, K.-P.; Picard, A.; Brill, M.; Cassel, D.; Jentsch, A.; Merten, S.; Rollwa, M.
JF  - Mst-News (2003)
Y1  - 2003
SN  - 0948-3128
SP  - 35
ER  - 
TY  - CHAP
A1  - Thurn, Laura
A1  - Balc, Nicolae
A1  - Gebhardt, Andreas
A1  - Kessler, Julia
T1  - Education packed in technology to promote innovations: Teaching Additive Manufacturing based on a rolling Lab
T2  - Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)
Y1  - 2017
U6  - http://dx.doi.org/10.1051/matecconf/201713702013
SN  - 2261-236X
N1  - MATEC Web Conf.
Volume 137, 2017
Matec Web of Conferences., 137(2017)02013
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Güntherodt, G.
T1  - Effect of adsorbates on the spin-polarized photoemission of itinerant ferromagnets. Schmitt, W.; Kämper, K.-P.; Güntherodt, G.
JF  - Physical Review B. 36 (1987), H. 7
Y1  - 1987
SN  - 1095-3795
SP  - 3763
EP  - 3768
ER  - 
TY  - JOUR
A1  - Heinrichs, Horst
A1  - Weck, H.
T1  - Efficient finite-element structural analysis by interactive graphic mesh generation
JF  - CIRP Annals. 30 (1981), H. 1
Y1  - 1981
SP  - 279
EP  - 284
ER  - 
TY  - CHAP
A1  - Göttsche, Joachim
A1  - Hinsch, Andreas
A1  - Wittwer, Volker
ED  - Hugo-Le Goff, Anne
T1  - Electrochromic and optical properties of mixed WO3-TiO2 thin films produced by sputtering and the sol-gel technique
T2  - Optical materials technology for energy efficiency and solar energy conversion XI: chromogenics for smart windows : 19 and 21 May 1992, Toulouse-Labège. (SPIE proceedings series. 1728)
Y1  - 1992
SN  - 0-8194-0901-4
SP  - 13
EP  - 25
PB  - SPIE
CY  - Bellingham, Wash.
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Ehrfeld, W.
A1  - Hagemann, B.
A1  - Lehr, H.
T1  - Electromagnetic permanent magnet micromotor with integrated micro gear box. Kämper, K.-P.; Ehrfeld, W.; Hagemann, B.; Lehr, H.; Michel, F.; Schirling, A.; Thürigen, C.; Wittig, T.
JF  - Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH
Y1  - 1996
N1  - International Conference on New Actuators <5, 1996, Bremen>
SP  - 429
CY  - Bremen
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Baier, M.
T1  - Energetic and operational use of FlexCargoRail freight wagons in the single wagon load traffic / Baier, M. ; Enning, M.
JF  - Towards zero emission : EVS 24, the 24th  International  Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition, Stavanger, Norway, May 13 - 16, 2009 ; symposium proceedings / organised by AVERE ... Robert Stüssi [Hrsg.]
Y1  - 2009
N1  - European Association of Electric Road Vehicles ; EVS ; (24 : ; 2009.05.13-16 : ; Stavanger)
CY  - Stavanger
ER  - 
TY  - CHAP
A1  - Raupach, Michael
A1  - Orlowsky, Jeannette
A1  - Büttner, T.
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
ED  - Hegger, Josef
T1  - Epoxy-impregnated textiles in concrete - load bearing capacity and durability
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 77
EP  - 88
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - THES
A1  - Pfaff, Raphael
T1  - Evaluation and extension of the potential for application of the behavioural framework to practical engineering problems
Y1  - 2013
N1  - Coventry, Univ., Diss., 2013
ER  - 
TY  - JOUR
A1  - Fateri, Miranda
A1  - Hötter, Jan-Steffen
A1  - Gebhardt, Andreas
T1  - Experimental and Theoretical Investigation of Buckling Deformation of Fabricated Objects by Selective Laser Melting
JF  - Physics Procedia
N2  - Although Selective Laser Melting (SLM) process is an innovative manufacturing method, there are challenges such as inferior mechanical properties of fabricated objects. Regarding this, buckling deformation which is caused by thermal stress is one of the undesired mechanical properties which must be alleviated. As buckling deformation is more observable in hard to process materials, silver is selected to be studied theoretically and experimentally for this paper. Different scanning strategies are utilized and a Finite Element Method (FEM) is applied to calculate the temperature gradient in order to determine its effect on the buckling deformation of the objects from experiments.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.phpro.2012.10.062
SN  - 1875-3892
N1  - Part of special issue "Laser Assisted Net shape Engineering 7 (LANE 2012)"
VL  - 39
SP  - 464
EP  - 470
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Chudoba, Rostislav
A1  - Konrad, Martin
ED  - Triantafillou, T. C.
T1  - Experimental investigation and micro-mechanical simulaltion of concrete reinforced with epoxy impregnated fabrics
T2  - Fibre-reinforced polymer reinforcement for concrete structures : proceedings of the 8th international conference : Patras, Greece, July 16- 18, 2007
Y1  - 2007
SN  - 9608969107
SP  - 456
EP  - 457
PB  - Univ.
CY  - Patras
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Khosravi, Maziar
T1  - Experimental investigation of selective laser melting of lunar regolith for in-situ applications
T2  - ASME 2013 International Mechanical Engineering Congress and Exposition : San Diego, California, USA, November 15–21, 2013. Vol. 2A: Advanced manufacturing
Y1  - 2013
SN  - 978-0-7918-5618-5
SP  - V02AT02A008
PB  - ASME
ER  - 
TY  - CHAP
A1  - Adomeit, G.
A1  - Willms, Herbert
ED  - Skupinski, Edwin
T1  - Experimental investigation of the acceleration of deflagration in wake flow
T2  - Safety of thermal water reactors : proceedings of a Seminar on the Results of the European Communities’ Indirect Action Research Programme on Safety of Thermal Water Reactors, held in Brussels, 1–3 October 1984 / Commission of the European Communities
Y1  - 1984
SN  - 0-86010-678-0
SN  - 978-94-009-4972-0 (Online-Nachdr. vom Springer-Verl.)
N1  - Forschungsvorhaben Nr. 024 SRD
SP  - 294
EP  - 304
PB  - Graham & Trotman [u.a.]
CY  - London Gaithersburg, Md.
ER  - 
TY  - RPRT
A1  - Adomeit, G.
A1  - Willms, Herbert
T1  - Experimental investigation of the acceleration of deflagration in wake flow : final report. - (Euratom-publications-EUR ; 9593 : Nuclear science and technology)
Y1  - 1984
SN  - 92-825-4699-3
PB  - Commission of the European Communities
CY  - Luxembourg
ER  - 
TY  - JOUR
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Thümmler, Stefan
A1  - Thurn, Laura
T1  - Experimental investigation on selective laser melting of glass
JF  - Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014
Y1  - 2014
U6  - http://dx.doi.org/10.1016/j.phpro.2014.08.118
SN  - 1875-3892 (E-Journal); 1875-3884 (Print)
VL  - 56 (2014)
SP  - 357
EP  - 364
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
A1  - Kapoor, Madan Lal
T1  - Experiments and theoretical considerations on the solution of oxygen in binary metal alloys
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1983
SN  - 0005-9021
SN  - 0940-483X
VL  - 87
IS  - 12
SP  - 1201
EP  - 1204
ER  - 
TY  - JOUR
A1  - Wang, Mao
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Experiments on the electrochemical determination of the sulphur activities in the system copper-silver at 1200°C
JF  - Zeitschrift für Metallkunde
Y1  - 1988
SN  - 0044-3093
VL  - 79
IS  - 5
SP  - 336
EP  - 339
ER  - 
TY  - JOUR
A1  - Mautner, Karin
A1  - Forster, Ralf
A1  - Kornhuber, Ralf
A1  - Sander, Oliver
T1  - Fast and Reliable Pricing of American Options with Local Volatility / Forster, Ralf ; Kornhuber, Ralf ; Mautner, Karin ; Sander, Oliver
JF  - Domain Decomposition Methods in Science and Engineering XVII
Y1  - 2008
SN  - 978-3-540-75198-4
N1  - Lecture Notes in Computational Sciece and Engineering ; 60
SP  - 383
EP  - 390
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Uchiyama, R.
A1  - Siekmann, H.
T1  - Fault Diagnostic Method for Pump Running Conditions Based on Process Modeling and Neural Network / Uchiyama, R. ; Kallweit, S. ; Siekmann, H.
JF  - International Journal of Rotating Machinery. 4 (1998), H. 1
Y1  - 1998
SN  - 1542-3034
SP  - 49
EP  - 59
ER  - 
TY  - JOUR
A1  - Kilic, S. A.
A1  - Raatschen, Hans-Jürgen
A1  - Körfgen, B.
A1  - Apaydin, N. M.
A1  - Astaneh-Asl, A.
T1  - FE Model of the Fatih Sultan Mehmet Suspension Bridge Using Thin Shell Finite Elements
JF  - Arabian Journal for Science and Engineering
N2  - This paper presents the results of an eigenvalue analysis of the Fatih Sultan Mehmet Bridge. A high-resolution finite element model was created directly from the available design documents. All physical properties of the structural components were included in detail, so no calibration to the measured data was necessary. The deck and towers were modeled with shell elements. A nonlinear static analysis was performed before the eigenvalue calculation. The calculated natural frequencies and corresponding mode shapes showed good agreement with the available measured ambient vibration data. The calculation of the effective modal mass showed that nine modes had single contributions higher than 5 % of the total mass. They were in a frequency range up to 1.2 Hz. The comparison of the results for the torsional modes especially demonstrated the advantage of using thin shell finite elements over the beam modeling approach.
KW  - Suspension bridge
KW  - 3D nonlinear finite element model
KW  - Thin shell finite elements
KW  - Natural frequency
KW  - Effective modal mass
Y1  - 2017
U6  - http://dx.doi.org/10.1007/s13369-016-2316-y
SN  - 2191-4281
VL  - 42
IS  - 3
SP  - 1103
EP  - 1116
PB  - Springer Nature
ER  - 
TY  - CHAP
A1  - Kilic, S. A.
A1  - Raatschen, Hans-Jürgen
A1  - Astaneh-Asl, A.
A1  - Apaydin, N. M.
T1  - Finite element modeling of the Fatih Sultan Mehmet Suspension Bridge
T2  - Multi-Span Large Bridges - Proceedings of the International Conference on Multi-Span Large Bridges
Y1  - 2015
SN  - 9781138027572
SP  - 1169
EP  - 1173
PB  - CRC Press
CY  - Leiden
ER  - 
TY  - CHAP
A1  - Starke, Günther
A1  - Kunkel, Thomas
A1  - Hahn, Daniel
T1  - Flexible collaboration and control of heterogeneous mechatronic devices and systems by means of an event-driven, SOA-based automation concept
T2  - 2013 IEEE International Conference on Industrial Technologies (ICIT-13)
Y1  - 2013
SN  - 978-1-4673-4567-5 ; 978-1-4673-4569-9
SP  - 1982
EP  - 1987
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Dues, M.
A1  - Gebhardt, Andreas
A1  - Kallweit, Stephan
A1  - Scheffler, T.
A1  - Siekmann, H.
A1  - Uchiyama, T.
T1  - Flow Visualization in a Cavitating Flow
JF  - Proceedings of the German-Japanese Symposium on Multi-Phase Flow : Karlsruhe, Germany, August 23 - 25, 1994 / comp. by U. Müller ...
Y1  - 1994
N1  - German Japanese Symposium on Multi-Phase Flow <1994, Karlsruhe> ; Kernforschungszentrum Karlsruhe ; 5389
SP  - 391
EP  - 402
PB  - Kernforschungszentrum Karlsruhe
CY  - Karlsruhe
ER  - 
TY  - JOUR
A1  - Ulmer, Jessica
A1  - Braun, Sebastian
A1  - Cheng, Chi-Tsun
A1  - Dowey, Steve
A1  - Wollert, Jörg
T1  - Gamification of virtual reality assembly training: Effects of a combined point and level system on motivation and training results
JF  - International Journal of Human-Computer Studies
N2  - Virtual Reality (VR) offers novel possibilities for remote training regardless of the availability of the actual equipment, the presence of specialists, and the training locations. Research shows that training environments that adapt to users' preferences and performance can promote more effective learning. However, the observed results can hardly be traced back to specific adaptive measures but the whole new training approach. This study analyzes the effects of a combined point and leveling VR-based gamification system on assembly training targeting specific training outcomes and users' motivations. The Gamified-VR-Group with 26 subjects received the gamified training, and the Non-Gamified-VR-Group with 27 subjects received the alternative without gamified elements. Both groups conducted their VR training at least three times before assembling the actual structure. The study found that a level system that gradually increases the difficulty and error probability in VR can significantly lower real-world error rates, self-corrections, and support usages. According to our study, a high error occurrence at the highest training level reduced the Gamified-VR-Group's feeling of competence compared to the Non-Gamified-VR-Group, but at the same time also led to lower error probabilities in real-life. It is concluded that a level system with a variable task difficulty should be combined with carefully balanced positive and negative feedback messages. This way, better learning results, and an improved self-evaluation can be achieved while not causing significant impacts on the participants' feeling of competence.
KW  - Gamification
KW  - Virtual reality
KW  - Assembly
KW  - User study
KW  - Level system
Y1  - 2022
U6  - http://dx.doi.org/10.1016/j.ijhcs.2022.102854
SN  - 1071-5819
VL  - 165
IS  - Art. No. 102854
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Chavez Bermudez, Victor Francisco
A1  - Wollert, Jörg
T1  - Gateway for Automation Controllers and Cloud based Voice Recognition Services
T2  - KommA, 10. Jahreskolloquium Kommunikation in der Automation
Y1  - 2019
SN  - 978-3-944722-85-6
SP  - 1
EP  - 8
PB  - Institut für Automation und Kommunikation
CY  - Magdeburg
ER  - 
TY  - CHAP
A1  - Ulmer, Jessica
A1  - Braun, Sebastian
A1  - Lai, Chow Yin
A1  - Cheng, Chi-Tsun
A1  - Wollert, Jörg
T1  - Generic integration of VR and AR in product lifecycles based on CAD models
T2  - Proceedings of The 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019
Y1  - 2019
ER  - 
TY  - JOUR
A1  - Hanrath, Wilhelm
A1  - Plesken, Wilhelm
T1  - Group rings and irreducible representations of space groups / by W. Hanrath and W. Plesken
JF  - Journal für die reine und angewandte Mathematik. 362 (1985)
Y1  - 1985
SN  - 0075-4102
SP  - 130
EP  - 140
ER  - 
TY  - JOUR
A1  - Cheng, Chi-Tsun
A1  - Wollert, Jörg
A1  - Chen, Xi
A1  - Fapojuwo, Abraham O.
T1  - Guest Editorial : Circuits and Systems for Industry X.0 Applications
JF  - IEEE Journal on Emerging and Selected Topics in Circuits and Systems
Y1  - 2023
U6  - http://dx.doi.org/10.1109/JETCAS.2023.3278843
SN  - 2156-3357 (Print)
SN  - 2156-3365 (Online)
VL  - 13
SP  - 457
EP  - 460
PB  - IEEE
CY  - New York
ET  - 2
ER  - 
TY  - JOUR
A1  - Ulmer, Jessica
A1  - Braun, Sebastian
A1  - Cheng, Chi-Tsun
A1  - Dowey, Steve
A1  - Wollert, Jörg
T1  - Human-Centered Gamification Framework for Manufacturing Systems
JF  - Procedia CIRP
N2  - While bringing new opportunities, the Industry 4.0 movement also imposes new challenges to the manufacturing industry and all its stakeholders. In this competitive environment, a skilled and engaged workforce is a key to success. Gamification can generate valuable feedbacks for improving employees’ engagement and performance. Currently, Gamification in workspaces focuses on computer-based assignments and training, while tasks that require manual labor are rarely considered. This research provides an overview of Enterprise Gamification approaches and evaluates the challenges. Based on that, a skill-based Gamification framework for manual tasks is proposed, and a case study in the Industry 4.0 model factory is shown.
Y1  - 2020
U6  - http://dx.doi.org/10.1016/j.procir.2020.04.076
SN  - 2212-8271
VL  - 93
SP  - 670
EP  - 675
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Pak, Daniel
A1  - Piegeler, D.
A1  - Feldmann, Markus
A1  - Schleser, Markus
A1  - Dilthey, Ulrich
ED  - Hegger, Josef
T1  - Hybrid joints of textile reinforced concrete parts - designed for assembly
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 181
EP  - 190
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Helbing, M.
A1  - Orglmeister, R.
A1  - Siekmann, H. E.
T1  - Image Processing Techniques with Neural Networks for Flow Visualization in Rotating Machinery / Helbing, M. ; Orgimeiste, R. [Orglmeister, R.] ; Kallweit, S. ; Siekmann, H. E. ; Dues, M. ; Cronemeyer, J.
JF  - FLUCOME '94 : the 4th Triennial International Symposium on Fluid Control, Measurement and Visualization; August 29 - September 1, 1994, Toulouse, France, International Congress Centre, DIGORA-Labège / CERT/ONERA. General chairman Patrick Hebrard
Y1  - 1994
SP  - 87
EP  - 94
CY  - Toulouse
ER  - 
TY  - CHAP
A1  - Engemann, Heiko
A1  - Badri, Sriram
A1  - Wenning, Marius
A1  - Kallweit, Stephan
T1  - Implementation of an Autonomous Tool Trolley in a Production Line
T2  - Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980
Y1  - 2019
SN  - 978-3-030-19648-6
U6  - http://dx.doi.org/10.1007/978-3-030-19648-6_14
SP  - 117
EP  - 125
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Seiler, Friedrich
A1  - Pichler, Alexander
A1  - Pfaff, Raphael
A1  - George, Alfred
A1  - Srulijes, Julio
T1  - Improved Doppler picture velocimetry and new automated processing
T2  - 14th International Symposium on Applications of Laser Techniques to Fluid Mechanics : Lisbon, Portugal, 7 - 10 July 2008
Y1  - 2008
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Mund, F.
A1  - Raupach, Michael
A1  - Schleser, Markus
A1  - Walk-Lauffer, Bernd
T1  - Improvement of textile reinforced concrete by polymer additives
T2  - ICPIC '04 : 11th International Congress on Polymers in Concrete : 2nd-4th June, 2004 at BAM, Berlin, Germany : proceedings / ed. by M. Maultzsch
Y1  - 2004
SN  - 3-00-013706-8
SP  - 469
EP  - 476
PB  - BAM
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Ferrein, Alexander
A1  - Gebhardt, Andreas
A1  - Kallweit, Stephan
A1  - Scholl, Ingrid
A1  - Tedjasukmana, Osmond Sanjaya
T1  - Improving additive manufacturing by image processing and robotic milling
T2  - 2015 IEEE International Conference on Automation Science and Engineering (CASE), Aug 24-28, 2015 Gothenburg, Sweden
Y1  - 2015
U6  - http://dx.doi.org/10.1109/CoASE.2015.7294217
SP  - 924
EP  - 929
ER  - 
TY  - JOUR
A1  - Cosma, Cosmin
A1  - Kessler, Julia
A1  - Gebhardt, Andreas
A1  - Campbell, Ian
A1  - Balc, Nicolae
T1  - Improving the Mechanical Strength of Dental Applications and Lattice Structures SLM Processed
JF  - Materials
N2  - To manufacture custom medical parts or scaffolds with reduced defects and high mechanical characteristics, new research on optimizing the selective laser melting (SLM) parameters are needed. In this work, a biocompatible powder, 316L stainless steel, is characterized to understand the particle size, distribution, shape and flowability. Examination revealed that the 316L particles are smooth, nearly spherical, their mean diameter is 39.09 μm and just 10% of them hold a diameter less than 21.18 μm. SLM parameters under consideration include laser power up to 200 W, 250–1500 mm/s scanning speed, 80 μm hatch spacing, 35 μm layer thickness and a preheated platform. The effect of these on processability is evaluated. More than 100 samples are SLM-manufactured with different process parameters. The tensile results show that is possible to raise the ultimate tensile strength up to 840 MPa, adapting the SLM parameters for a stable processability, avoiding the technological defects caused by residual stress. Correlating with other recent studies on SLM technology, the tensile strength is 20% improved. To validate the SLM parameters and conditions established, complex bioengineering applications such as dental bridges and macro-porous grafts are SLM-processed, demonstrating the potential to manufacture medical products with increased mechanical resistance made of 316L.
Y1  - 2020
U6  - http://dx.doi.org/10.3390/ma13040905
SN  - 1996-1944
VL  - 13
IS  - 4
SP  - 1
EP  - 18
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Roesner, Andreas
A1  - Scheik, Sven
A1  - Olowinsky, Alexander
A1  - Gillner, Arnold
A1  - Propawe, Reinhart
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Innovative approach of joining hybrid components
JF  - Journal of laser applications
Y1  - 2011
SN  - 1042-346X
VL  - Vol. 23
IS  - Iss. 3
SP  - 32007
PB  - Laser Institute of America
CY  - Orlando, Fla.
ER  - 
TY  - JOUR
A1  - Glowania, Michael
A1  - Gries, Thomas
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Innovative coating technology for textile reinforcements of concrete applications
JF  - 13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)
Y1  - 2011
SN  - 978-3-03785-008-4
SN  - 1013-9826 (E-Journal) ; 0252-1059 (Print)
SP  - 167
EP  - 173
PB  - Trans Tech Publications
CY  - Bäch
ER  - 
TY  - CHAP
A1  - Gerhards, Benjamin
A1  - Schleser, Markus
A1  - Otten,, Christian
A1  - Schwarz, Alexander
A1  - Gebhardt, Andreas
T1  - Innovative Laser Beam Joining Technology for Additive Manufactured Parts
T2  - Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava
Y1  - 2019
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Kolkmann, Annette
A1  - Gries, Thomas
A1  - Schleser, Markus
A1  - Dilthey, Ulrich
T1  - Innovative yarn structures and coatings for textile reinforced concrete
T2  - All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main
Y1  - 2005
CY  - Frankfurt a.M.
ER  - 
TY  - CHAP
A1  - Schürmann, Volker
A1  - Mann, Thorsten
A1  - Buda, Aurel
A1  - Wollert, Jörg
T1  - Integrating bluetooth localization into existing TCP/IP networks
T2  - IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, 2009 : IDAACS 2009 ; Rende, Cosenza, Italy, 21 - 23 Sept. 2009
Y1  - 2009
SN  - 978-1-4244-4882-1 ; ISBN: 978-1-4244-4901-9
U6  - http://dx.doi.org/10.1109/IDAACS.2009.5342903
SP  - 621
EP  - 624
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Schürmann, Volker
A1  - Keller, Alex
A1  - Wollert, Jörg
T1  - Internet based middleware approach for building services
T2  - Proceedings / IMETI 2009, the 2nd International Multi-Conference on Engineering and Technological Innovation : July 10 - 13, 2009 Orlando, Florida, USA ; vol. 1
Y1  - 2009
SN  - 1-934272-68-X ; 978-1-934272-68-8
SP  - 30
EP  - 34
PB  - IIIS
CY  - Winter Garden, Fla.
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Introduction to Additive Manufacturing
T2  - 3D Printing of Optical Components
N2  - Additive manufacturing (AM) works by creating objects layer by layer in a manner similar to a 2D printer with the “printed” layers stacked on top of each other. The layer-wise manufacturing nature of AM enables fabrication of freeform geometries which cannot be fabricated using conventional manufacturing methods as a one part. Depending on how each layer is created and bonded to the adjacent layers, different AM methods have been developed. In this chapter, the basic terms, common materials, and different methods of AM are described, and their potential applications are discussed.
KW  - Additive manufacturing
KW  - 3D printing
KW  - Digital manufacturing
KW  - Rapid prototyping
KW  - Rapid manufacturing
Y1  - 2020
SN  - 978-3-030-58960-8
U6  - http://dx.doi.org/10.1007/978-3-030-58960-8_1
SP  - 1
EP  - 22
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Turichin, Gleb
A1  - Valdaitseva, Elena
A1  - Bach, Friedrich-Wilhelm
A1  - Hassel, Thomas
A1  - Beniyashi, Alexander
T1  - Investigation of factors for defect-free weld formation by non-vacuum electron beam welding
T2  - Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine
Y1  - 2011
SP  - 104
EP  - 109
PB  - Paton Publ. House
CY  - Kiev
ER  - 
TY  - CHAP
A1  - Huber, Frédéric
A1  - Bleck, Wolfgang
A1  - Scheik, Sven
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Investigation of galvanneal coating adherence in adhesive bonded joints using lap shear test
T2  - Galvatech 2011 : 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, June 21 - 24, 2011, Genova (Italy) ; proceedings
Y1  - 2011
SN  - 978-88-85298-82-8
SP  - Paper No. 43
PB  - Associazione Italiana di Metallurgia
CY  - Mailand
ER  - 
TY  - JOUR
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Feldmann, Martin
A1  - Pak, Daniel
A1  - Geßler, Achim
T1  - Investigation of punctiform, plane and hybrid joints of textile-reinforced concrete parts
JF  - Cement and concrete composites
Y1  - 2008
SN  - 0958-9465
VL  - Vol. 30
IS  - iss. 2
SP  - 82
EP  - 87
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Investigation of the thermodynamics of oxygen and the determination of phase boundaries in the system copper-oxygen-bismuth at 12000C
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 8
SP  - 530
EP  - 534
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Schoene, Jens
A1  - Hegger, Josef
A1  - Gallwoszus, Jörg
A1  - Feldmann, Markus
A1  - Kopp, Maik
A1  - Gündel, Max
ED  - Cairns, John W.
T1  - Investigation on bond mechanisms of innovative small-scale shear connectors between steel and concrete
T2  - Bond in concrete 2012. Vol. 2. Bond in new materials and under severe conditions
Y1  - 2012
SN  - 978-88-907078-3-4
SP  - 893
EP  - 898
PB  - Publisher creations
CY  - Manerbio, Brescia
ER  - 
TY  - CHAP
A1  - Weiss, Christian
A1  - Heslenfeld, Jonas
A1  - Saewe, Jasmin Kathrin
A1  - Bremen, Sebastian
A1  - Häfner, Constantin Leon
T1  - Investigation on the influence of powder humidity in Laser Powder Bed Fusion (LPBF)
T2  - Procedia CIRP
N2  - In the Laser Powder Bed Fusion (LPBF) process, parts are built out of metal powder material by exposure of a laser beam. During handling operations of the powder material, several influencing factors can affect the properties of the powder material and therefore directly influence the processability during manufacturing. Contamination by moisture due to handling operations is one of the most critical aspects of powder quality. In order to investigate the influences of powder humidity on LPBF processing, four materials (AlSi10Mg, Ti6Al4V, 316L and IN718) are chosen for this study. The powder material is artificially humidified, subsequently characterized, manufactured into cubic samples in a miniaturized process chamber and analyzed for their relative density. The results indicate that the processability and reproducibility of parts made of AlSi10Mg and Ti6Al4V are susceptible to humidity, while IN718 and 316L are barely influenced.
KW  - LPBF
KW  - Additive Manufacturing
KW  - Powder Material
KW  - Humidity
Y1  - 2022
U6  - http://dx.doi.org/10.1016/j.procir.2022.08.102
SN  - 2212-8271
N1  - Teil der Sonderausgabe: 12th CIRP Conference on Photonic Technologies [LANE 2022]
VL  - 111
SP  - 115
EP  - 120
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Investigations of the thermodynamics of oxygen and the determination of the miscibility gap in the system copper-oxygen-lead at 12000C
JF  - Zeitschrift für Metallkunde
Y1  - 1984
SN  - 0044-3093
VL  - 75
IS  - 8
SP  - 586
EP  - 589
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Jewelry fabrication via selective laser melting of glass
T2  - ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications
N2  - Selective Laser Melting (SLM) is one of the Additive Manufacturing (AM) technologies applicable for producing complex geometries which are typically expensive or difficult to fabricate using conventional methods. This process has been extensively investigated experimentally for various metals and the fabrication process parameters have been established for different applications; however, fabricating 3D glass objects using SLM technology has remained a challenge so far although it could have many applications. This paper presents a summery on various experimental evaluations of a material database incorporating the build parameters of glass powder using the SLM process for jewelry applications.
Y1  - 2014
SN  - 978-0-7918-4583-7
U6  - http://dx.doi.org/10.1115/ESDA2014-20380
SP  - V001T06A005
ER  - 
TY  - JOUR
A1  - Roesner, Andreas
A1  - Scheik, Sven
A1  - Olowinsky, Alexander
A1  - Gillner, Arnold
A1  - Reisgen, Uwe
A1  - Schleser, Markus
T1  - Laser assisted joining of plastic metal hybrids
JF  - Lasers in manufacturing 2011 : proceedings of the sixth International WLT Conference on Lasers in Manufacturing, Munich, May 23 - 26 2011. (Physics procedia ; Vol. 12 (2011), Part B)
Y1  - 2011
SN  - 1875-3892 (E-Journal); 1875-3884 (Print)
SP  - 370
EP  - 377
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Olschok, Simon
A1  - Jakobs, Stefan
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Rossiter, Eduardo
T1  - Laser beam submerged arc hybrid welding
JF  - Physics procedia
N2  - The laser beam-submerged arc hybrid welding method originates from the knowledge that, with increasing penetration depth, the laser beam process has a tendency to pore formation in the lower weld regions. The coupling with the energy-efficient submerged-arc process improves degassing and reduces the tendency to pore formation. The high deposition rate of the SA process in combination with the laser beam process offers, providing the appropriate choice of weld preparation, the possibility of welding plates with a thickness larger than 20° mm in a single pass, and also of welding thicker plates with the double-sided single pass technique.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.phpro.2012.10.016
SN  - 1875-3892
N1  - Part of special issue "Laser assisted net shape engineering 7 (LANE 2012)"
VL  - 39
SP  - 75
EP  - 83
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
T1  - Laserwelding with fillerwire
JF  - LIA handbook of laser material processing / Laser Institute of America
Y1  - 2001
SN  - 3-540-41770-2
N1  - Chapter 11.2.12
CY  - Orlando, Florida
ER  - 
TY  - JOUR
A1  - Starke, Günther
A1  - Drews, P.
T1  - Le soudage au siecle de l'informatique
JF  - Souder. 18 (1994), H. 6
Y1  - 1994
SN  - 0246-1900
SP  - 33
EP  - 44
ER  - 
TY  - CHAP
A1  - Wiesen, Patrick
A1  - Engemann, Heiko
A1  - Limpert, Nicolas
A1  - Kallweit, Stephan
T1  - Learning by Doing - Mobile Robotics in the FH Aachen ROS Summer School
T2  - European Robotics Forum 2018, TRROS18 Workshop
Y1  - 2018
SP  - 47
EP  - 58
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Lehr, H.
A1  - Ehrfeld, W.
A1  - Michel, F.
T1  - LIGA Components for the Construction of Milliactuators. Lehr, H.; Ehrfeld, W.; Kämper, K.-P.; Michel, F.; Schmidt, M.
JF  - 1994 IEEE Symposium on Emerging Technologies & Factory Automation : novel disciplines for the next century ; proceedings, November 6 - 10, 1994, Tokyo, Japan / ETFA '94. Hiroyuki Fujita [chairman] ... Sponsored by: Institute of Industrial Science, SEIKEN
Y1  - 1994
SN  - 0780321146
SP  - 43
EP  - 47
CY  - Piscataway, N.J.
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Hagemann, B.
A1  - Lehr, H.
A1  - Michel, F.
T1  - LIGA Example 2: Electromagnetic Micromotor. Hagemann, B.; Kämper, K.-P.; Lehr, H.; Michel, F.; Thürigen, C.
JF  - LIGA technique / Hans-Dieter Bauer (ed.). [Developed by UETP-MEMS, University Training Partnership for Micro-Electro-Mechanical Systems ...]. - 2.ed.
Y1  - 1995
N1  - University Enterprise Training Partnership for Micro-Electro-Mechanical Systems
SP  - 100
EP  - 110
PB  - FSRM
CY  - Neuchatel
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schulz, C.
A1  - Ehrfeld, W.
A1  - Erbel, R.
T1  - LIGA Fabricated Microsystems for Medical and Related Applications. Schulz, C.; Ehrfeld, W.; Erbel, R.; Kämper, K.-P.; Koch, L.; Lehr, H.; Roth, T.
JF  - 3-Day Course on Microengineering in Medicine and Biology and its Applications to Minimally Invasive Techniques for Therapy and Medical Diagnosis : EURO-BME 94; October 5, 6, and 7, 1994, Swiss Federal Institute of Technology, EPFL, Lausanne, Switzerland / [the 1994 EURO-BME Microengineering in Medicine and Biology Training Course. Staff: Christian D. Depeursinge ...]
Y1  - 1994
N1  - Microengineering in Medicine and Biology Training Course 1994, Lausanne
PB  - REPRO EPFL
CY  - Lausanne
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Hegger, Josef
A1  - Voss, Stefan
ED  - Reinhardt, Hans W.
T1  - Load-bearing behaviour of polymer-impregnated textiles in concrete
T2  - Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53)
Y1  - 2007
SN  - 978-2-35158-046-2
SP  - 183
EP  - 192
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Zambou, N.
A1  - Abel, D.
T1  - Longitudinal Control of Following Vehicles within Platoon : A Model-Based Predictive Approach / Zambou, N. ; Enning, M. ; Abel, D.
JF  - Advances in automotive control 2004 : a proceedings volume from the IFAC symposium, Salerno, Italy, 19 - 23 April 2004 / ed. C. Pianese
Y1  - 2005
SN  - 0080442501
N1  - International Federation of Automatic Control ; Symposium on Advances in Automotive Control ; (4, 2004, Salerno)
SP  - 733
EP  - 738
PB  - Elsevier
CY  - Oxford
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Pappas, D. P.
A1  - Miller, B. P.
A1  - Hopster, H.
T1  - Magnetism of ultrathin films of Fe on Cu(100). Pappas, D. P; Kämper, K.-P.; Miller, B. P.; Hopster, H.; Fowler, D. E.; Luntz, A. C.; Brundle, C.R.; Shen, Z.-X.
JF  - Journal of Applied Physics. 69 (1991), H. 8
Y1  - 1991
SN  - 1089-7550
SP  - 5209
EP  - 521
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Ehrfeld, W.
A1  - Hessel, V.
A1  - Lacher, M.
T1  - Market oriented development and production of microdevices. Ehrfeld, W.; Hessel, V.; Kämper, K.-P.; Lacher, M.; Picard, A.; Schmidt, M.; Schulz, C.
JF  - Proceedings : 21th International Conference on Microelectronics : MIEL '97 ; Niš, Yugoslavia, 14-17 September 1997. Vol. 1
Y1  - 1997
SN  - 0-7803-3664-X
SP  - 71
EP  - 79
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Gumenyuk, Amdrej V.
ED  - Turichin, G.
T1  - Measurement method of electron beam plasma parameters by non-vacuum electron beam welding
T2  - Beam technologies & laser application : proceedings of the VI international conference, Saint Petersburg, Sept. 23-25, 2009
Y1  - 2009
SP  - 259
EP  - 267
PB  - Politechnical Univ.
CY  - Saint Petersburg
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Gumenyuk, Andrey
T1  - Measuring of plasma properties induced by non-vacuum electron beam welding
JF  - Physics of plasma
N2  - Electron beam plasma measurement was realised by means of DIABEAM system invented by ISF RWTH Aachen. The Langmuir probe method is used for measurement. The relative simplicity of the method and the possibility of dispersion of high power on the probe allow its application for the investigation of high-power electron beams. The key element of the method is a rotating thin tungsten wire, which intersects the beam transversely on its axis and collects part of the current by itself. The signals, which are registered in the DIABEAM as a voltage, were taken in the form of amplitude. The conversion of the probe current into the distribution along the beam radius was realised using the Abel’s method. A voltage-current characteristic was built for the beam current. The local electron density as well as the electron temperature, the floating potential and the plasma potential were measured and calculated by means of this characteristic.
Y1  - 2012
U6  - http://dx.doi.org/10.1063/1.3675874
SN  - 1089-7674 (E-Journal); 1070-664X (Print)
VL  - 19
IS  - 1
SP  - 1
EP  - 7
PB  - AIP Publishing
CY  - Melville, NY
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Jenayeh, I.
A1  - Müller, C.
A1  - Kositza, N.
T1  - Mechatronics in automating shunting processes in marshalling yards / Jenayeh, I. ; Müller, C.; Kositza, N. ; Enning, M. ; Rake, H.
JF  - Mechatronics  '98 : proceedings of the 6th UK Mechatronics Forum International Conference, Skövde, Sweden, 9-11 September 1998
Y1  - 1998
SN  - 0-08-043339-1
N1  - UK Mechatronics Forum International Conference (6 : 1998  : Skövde)
PB  - Pergamon
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Dannen, Tammo
A1  - Schindele, Benedikt
A1  - Prümmer, Marcel
A1  - Arntz, Kristian
A1  - Bergs, Thomas
T1  - Methodology for the self-optimizing determination of additive manufacturing process eligibility and optimization potentials in toolmaking
T2  - Procedia CIRP
N2  - Additive Manufacturing (AM) of metallic workpieces faces a continuously rising technological relevance and market size. Producing complex or highly strained unique workpieces is a significant field of application, making AM highly relevant for tool components. Its successful economic application requires systematic workpiece based decisions and optimizations. Considering geometric and technological requirements as well as the necessary post-processing makes deciding effortful and requires in-depth knowledge. As design is usually adjusted to established manufacturing, associated technological and strategic potentials are often neglected. To embed AM in a future proof industrial environment, software-based self-learning tools are necessary. Integrated into production planning, they enable companies to unlock the potentials of AM efficiently. This paper presents an appropriate methodology for the analysis of process-specific AM-eligibility and optimization potential, added up by concrete optimization proposals. For an integrated workpiece characterization, proven methods are enlarged by tooling-specific figures.

The first stage of the approach specifies the model’s initialization. A learning set of tooling components is described using the developed key figure system. Based on this, a set of applicable rules for workpiece-specific result determination is generated through clustering and expert evaluation. Within the following application stage, strategic orientation is quantified and workpieces of interest are described using the developed key figures. Subsequently, the retrieved information is used for automatically generating specific recommendations relying on the generated ruleset of stage one. Finally, actual experiences regarding the recommendations are gathered within stage three. Statistic learning transfers those to the generated ruleset leading to a continuously deepening knowledge base. This process enables a steady improvement in output quality.
KW  - Additive manufacturing
KW  - Laser-Powder Bed Fusion
KW  - L-PBF
KW  - Binder Jetting
KW  - Directed Energy Deposition
Y1  - 2022
U6  - http://dx.doi.org/10.1016/j.procir.2022.05.188
SN  - 2212-8271
N1  - 55th CIRP Conference on Manufacturing Systems
VL  - 107
SP  - 1539
EP  - 1544
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Döpper, J.
A1  - Clemens, M.
A1  - Ehrfeld, W.
T1  - Micro gear pumps for dosing of viscous fluids. / Döpper, J. (u.a.)
JF  - Journal of Micromechanics and Microengineering. 7 (1997), H. 3
Y1  - 1997
SN  - 0960-1317
SP  - 230
EP  - 232
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Lehr, H.
A1  - Abel, S.
A1  - Döpper, J.
T1  - Microactuators as driving units for microrobotic systems. Herstellung von Mikroaktoren mit dem LIGA-Verfahren für Mikroroboter  / Lehr, H.; Abel, S.; Döpper, J.; Ehrfeld, W.; Hagemann, B.; Kämper, K.-P.; Michel, F.; Schulu, c.; Thürigen, C.
JF  - Proceedings of the SPIE - The International Society for Optical Engineering
Y1  - 1996
SN  - 0277-786X
N1  - Konferenz-Einzelbericht.
SP  - 202
EP  - 210
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Ehrfeld, W.
A1  - Döpper, J.
A1  - Hessel, V.
T1  - Microfluidic components for biological and chemical microreactors. Kämper, K.-P.; Ehrfeld, W.; Döpper, J.; Hessel, V.; Lehr, H.; Löwe, H.; Richter, T.; Wolf, A.
JF  - Proceedings : an investigation of micro structures, sensors, actuators, machines and robots ; Nagoya, Japan, January 26 - 30, 1997 / IEEE Robotics and Automation Society ...
Y1  - 1997
SN  - 0-7803-3744-1
N1  - International Workshop on Micro-Electro-Mechanical Systems <10, 1997, Nagoya>
SP  - 338
EP  - 343
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Braun, Sebastian
A1  - Cheng, Chi-Tsun
A1  - Lai, Chow Yin
A1  - Wollert, Jörg
T1  - Microservice Architecture for Automation - Realization by the example of a model-factory’s manufacturing execution system
T2  - Proceedings of the 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019
Y1  - 2019
SP  - 33
EP  - 37
ER  - 
TY  - JOUR
A1  - Ramazani, Ali
A1  - Li, Yang
A1  - Mukherjee, Krishnendu
A1  - Prahl, Ulrich
A1  - Bleck, Wolfgang
A1  - Abdurakhmanov, Aydemir
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding
JF  - Computational materials science
Y1  - 2013
SN  - 1879-0801 (E-Book); 0927-0256 (Print)
VL  - Vol. 68
SP  - 107
EP  - 116
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Abraham, M.
A1  - Ehrfeld, W.
A1  - Hessel, V.
T1  - Microsystem technology: Between research and industrial application. Abraham, M.; Ehrfeld, W.; Hessel, V.; Kämper, K.-P.; Lacher, M.; Picard, A.
JF  - Microelectronic Engineering. 41-42 (1998)
Y1  - 1998
SN  - 0167-9317
N1  - International Conference on Micro- and Nanofarbication <Athens, Greece, 15 September - 18 September 1998>
SP  - 47
EP  - 52
ER  - 
TY  - CHAP
A1  - Buda, Aurel
A1  - Jozenfini, B.
A1  - Wollert, Jörg
T1  - Mobile ad-hoc Network for home automation based on ZigBee application framework
T2  - 1st European ZigBee Developer's Conference : June 18 - 20, 2007, Munich, Germany
Y1  - 2007
SP  - 1
EP  - 5
PB  - Design & Elektronik
CY  - Poing
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Pichler, Alexander
A1  - George, Alfred
A1  - Seiler, Friedrich
T1  - Model based image processing for flow visualisation : 16th International Conference on Systems Science, Wroclaw, Poland, September 04 - 06, 2007
T2  - PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620
Y1  - 2007
SP  - 1
EP  - 10
PB  - ISL
CY  - Saint Louis, France
ER  - 
TY  - CHAP
A1  - Gao, H.
A1  - Babilon, Katharina
A1  - Pfaff, Raphael
A1  - Gan, F.
A1  - Reich, A.
T1  - Model of wheel-rail contact for sanding and adhesion enhancement
T2  - Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018
Y1  - 2018
SN  - 978-946186963-0
SP  - 314
EP  - 321
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Zabirov, Alexander
A1  - Füssel, Uwe
A1  - Schnick, Michael
A1  - Hertel, Martin
A1  - Jaeckel, Sebastian
T1  - Modelling and visualisation of the GMA process
JF  - Welding and Cutting
Y1  - 2012
SN  - 1612-3433
VL  - 11
IS  - 4
SP  - 242
EP  - 249
PB  - DVS Verlag
CY  - Düsseldorf
ER  - 
TY  - THES
A1  - Pfaff, Raphael
T1  - Modelling of nonlinear systems using piecewise defined models
Y1  - 2006
N1  - Coventry, Univ., Masterarbeit, 2006
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Moshiri, Amir
A1  - Reich, Alexander
A1  - Gäbel, Markus
T1  - Modelling of the effect of sanding on the wheel-rail adhesion area
T2  - First International Conference on Rail Transportation
Y1  - 2017
N1  - 2017 ICRT;
International Conference on Rail Transportation <1, 2017, Chengdu, China>
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Vinsonneau, B.
A1  - Burnham, K. J.
T1  - Multiple models for nonlinear systems
T2  - Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]
Y1  - 2006
SN  - 1-84600-013-0
SP  - 347
EP  - 352
ER  - 
TY  - JOUR
A1  - Schwarz, Alexander
A1  - Gebhardt, Andreas
A1  - Schleser, Markus
A1  - Popoola, Patricia
T1  - New Welding Joint Geometries Manufactured by Powder Bed Fusion from 316L
JF  - Materials Performance and Characterization 8
Y1  - 2019
U6  - http://dx.doi.org/10.1520/MPC20180096
SN  - 2379-1365
IS  - in press
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Zambou, Nathan
A1  - Abel, Dirk
T1  - Nonlinear spacing control of following vehicles within platoon a controlled lagrangian approach / Zambou, Nathan ; Enning, Manfred ; Abel, Dirk
JF  - NOLCOS, IFAC Symposium on Nonlinear Control Systems
Y1  - 2004
N1  - NOLCOS, 2004, IFAC Symposium on Nonlinear Control Systems, 6th, Stuttgart, DE, 2004-09-01 - 2004-09-03
SP  - 1211
EP  - 1216
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Scheik, Sven
A1  - Michaeli, Walter
A1  - Grönlund, Oliver
A1  - Neuß, Andreas
A1  - Wunderle, Johannes
A1  - Poprawe, Reinhart
A1  - Rösner, A.
A1  - Bobzin, Kirsten
A1  - Schläfer, Thomas
A1  - Theiß, Sebastian
A1  - Kutschmann, Pia
A1  - Haberstroh, Edmund
A1  - Flock, Dustin
A1  - Bührig-Polaczek, Andreas
A1  - Jakob, M.
ED  - Thoben, Klaus-Dieter
T1  - Novel process chains for the production of plastics/metal-hybrids
T2  - 17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011
Y1  - 2011
SN  - 978-1-457-70772-8 ; 978-3-943024-05-0
SP  - 596
EP  - 604
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Seiler, Friedrich
A1  - Pichler, Alexander
A1  - Pfaff, Raphael
A1  - Srulijes, Julio
T1  - Novel processing tools for automated doppler picture velocimetry (DPV) evaluation
JF  - Journal of visualization
Y1  - 2009
SN  - 1343-8875
VL  - Vol. 12
IS  - Iss. 4
SP  - 323
EP  - 337
ER  - 
TY  - BOOK
A1  - Engeln-Müllges, Gisela
A1  - Uhlig, Frank
T1  - Numeric Algorithms with Fortran
Y1  - 1996
SN  - 3-540-60529-0
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - BOOK
A1  - Engeln-Müllges, Gisela
A1  - Uhlig, Frank
T1  - Numerical algorithms with C
Y1  - 1996
SN  - 3-540-60530-0
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Numerical and experimental investigation of tensile behavior of laser beam welded TRIP700 steel
JF  - ISIJ international
Y1  - 2011
SN  - 1347-5460 (E-Journal); 0915-1559 (Print)
VL  - Vol. 51
IS  - No. 3
SP  - 429
EP  - 434
PB  - ISIJ
CY  - Tōkyō
ER  - 
TY  - BOOK
A1  - Mautner, Karin
T1  - Numerical treatment of the Black-Scholes variational inequality in computational finance
Y1  - 2006
N1  - Humboldt-Univ., Diss
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Engemann, Heiko
A1  - Du, Shengzhi
A1  - Kallweit, Stephan
A1  - Cönen, Patrick
A1  - Dawar, Harshal
T1  - OMNIVIL - an autonomous mobile manipulator for flexible production
JF  - Sensors
Y1  - 2020
SN  - 1424-8220
U6  - http://dx.doi.org/10.3390/s20247249
N1  - Special issue: Sensor Networks Applications in Robotics and Mobile Systems
VL  - 20
IS  - 24, art. no. 7249
SP  - 1
EP  - 30
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Burnham, Keith J.
T1  - On abstraction and interpretability: a behavioural perspective
T2  - 19th International Conference on Systems Engineering 2008 : ICSENG '08 : 19 - 21 Aug. 2008, University of Nevada, Las Vegas, Nevada
Y1  - 2008
SN  - 978-0-7695-3331-5 ; 978-0-7695-2719-2
SP  - 89
EP  - 94
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Pfaff, Raphael
A1  - Burnham, Keith J.
T1  - On abstraction and interpretability: a behavioural perspective
JF  - Systems Science
Y1  - 2009
SN  - 0137-1223
VL  - Vol. 35
IS  - Iss. 2
SP  - 19
EP  - 26
ER  - 
TY  - JOUR
A1  - Ahmed, Essam
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
T1  - On formability of tailor laser welded blanks of DP/TRIP steel sheets
JF  - Science and technology of welding and joining
N2  - This paper aims to evaluate the formability of tailor welded blanks of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets. In this work, bead on plate butt joints of 2·5 mm DP600 and 1·2 mm TRIP700 steel sheets were performed using CO2 laser beam welding. Microhardness measurements and transverse tensile testing were carried out to characterise the welds. The formability of base metals and welds were investigated by standard Erichsen test. In a perpendicular tensile test to the weld line, all specimens were fractured at the TRIP base metal, and the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of the DP600/TRIP700 steel sheets, and the formability increased with increasing welding speed.
Y1  - 2010
U6  - http://dx.doi.org/10.1179/136217110X12731414739754
SN  - 1743-2936
VL  - 15
IS  - 5
SP  - 337
EP  - 342
PB  - Maney
CY  - Leeds
ER  - 
TY  - CHAP
A1  - Eichler, Fabian
A1  - Skupin, Marco
A1  - Thurn, Laura
A1  - Kasch, Susanne
A1  - Schmidt, Thomas
T1  - Operating limits for beam melting of glass materials
T2  - Modern Technologies in Manufacturing (MTeM 2019)
N2  - Laser-based Additive Manufacturing (AM) processes for the use of metals out of the powder bed have been investigated profusely and are prevalent in industry. Although there is a broad field of application, Laser Powder Bed Fusion (LPBF), also known as Selective Laser Melting (SLM) of glass is not fully developed yet. The material properties of glass are significantly different from the investigated metallic material for LPBF so far. As such, the process cannot be transferred, and the parameter limits and the process sequence must be redefined for glass. Starting with the characterization of glass powders, a parameter field is initially confined to investigate the process parameter of different glass powder using LPBFprocess. A feasibility study is carried out to process borosilicate glass powder. The effects of process parameters on the dimensional accuracy of fabricated parts out of borosilicate and hints for the post-processing are analysed and presented in this paper.
Y1  - 2019
U6  - http://dx.doi.org/10.1051/matecconf/201929901004
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01004
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Optimization of laser welding of DP/TRIP steel sheets using statistical approach
JF  - Optics and laser technology
N2  - Generally, the quality of a weld joint is directly influenced by the welding input parameter settings. Selection of proper process parameters is important to obtain the desired weld bead profile and quality. In this research work, numerical and graphical optimization techniques of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets were carried out using response surface methodology (RSM) based on Box–Behnken design. The procedure was established to improve the weld quality, increase the productivity and minimize the total operation cost by considering the welding parameters range of laser power (2–2.2 kW), welding speed (40–50 mm/s) and focus position (−1 to 0 mm). It was found that, RSM can be considered as a powerful tool in experimental welding optimization, even when the experimenter does not have a model for the process. Strong, efficient and low cost weld joints could be achieved using the optimum welding conditions.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.optlastec.2011.06.028
SN  - 1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)
VL  - 44
IS  - 1
SP  - 255
EP  - 262
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Großmann, Agnes
A1  - Gabrielli, Roland Antonius
A1  - Herdrich, Georg
A1  - Fasoulas, Stefanos
A1  - Schnauffer, Peter
A1  - Middendorf, Peter
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Overview of the MultiRob 3D Lunar Industrial Development Project
T2  - Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Chudoba, Rostislav
A1  - Konrad, Martin
A1  - Schleser, Markus
A1  - Meskouris, Konstantin
A1  - Reisgen, Uwe
ED  - Curbach, Manfred
T1  - Parametric study of tensile response of TRC specimens reinforced with epoxy-penetrated multi-filament yarns
T2  - Textilbeton - Theorie und Praxis : Tagungsband zum 4. Kolloquium zu textilbewehrten Tragwerken (CTRS4) und zur 1. Anwendertagung, Dresden, 3.6.2009 - 5.6.2009
Y1  - 2009
SN  - 978-3-86780-122-5
SP  - 87
EP  - 98
PB  - Techn. Univ.
CY  - Dresden
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Dues, M.
A1  - Siekmann, H.
T1  - Particle-Image-Velocimetry (PIV) in rotierenden Maschinen / Dues, M. ; Kallweit, S. ; Siekmann, H.
JF  - Lasermethoden in der Strömungsmesstechnik, 3. Fachtagung der Deutschen Gesellschaft für Laser-Anemometrie (GALA), Bremen, DE, 5.-7. Sep, 1994
Y1  - 1994
SN  - 3-8265-0162-4
N1  - Lasermethoden in der Strömungsmesstechnik, Fachtagung, 3
SP  - 19.1
EP  - 19-5
PB  - Shaker
CY  - Aachen
ER  -