TY - JOUR
A1 - Fateri, Miranda
A1 - Gebhardt, Andreas
T1 - Process Parameters Development of Selective Laser Melting of Lunar Regolith for On-Site Manufacturing Applications
JF - International Journal of Applied Ceramic Technology
Y1 - 2015
SN - 1744-7402
U6 - http://dx.doi.org/10.1111/ijac.12326
VL - 12
IS - 1
SP - 46
EP - 52
PB - Wiley-Blackwell
CY - Oxford
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Echtzeit-Ethernet mit Standardtechnik
JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler ; Sonderh. Embedded : Fachmagazin für die Entwicklung von Embedded-Systemen
Y1 - 2014
SN - 0013-5658
VL - Bd. 63
IS - H. 12
SP - 28
EP - 32
PB - WEKA-Fachmedien
CY - Haar
ER -
TY - CHAP
A1 - Huber, Max
A1 - Rau, Sebastian
A1 - Streblow, Rita
A1 - Wollert, Jörg
A1 - Müller, Dirk
T1 - Lüftungskanäle als Funkstrecke
T2 - Jahreskolloquium Kommunikation in der Automation (KommA 2014) : Lemgo, 18.11.2014 / Jürgen Jasperneite ... (Hrsg.)
Y1 - 2014
SN - 978-3-9814062-4-5
SP - 1
EP - 8
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Im Sog des Standards : Windows CE als Betriebssystem für Embedded Controller
JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler
Y1 - 1998
SN - 0013-5658
N1 - Printausg. in der Bibliothek vorhanden: 63 ZS 030
VL - Bd. 47
IS - H. 9
SP - 40
EP - 51
ER -
TY - BOOK
A1 - Wollert, Jörg
T1 - Wireless Technologies : 11. Kongress, 29.-30. September 2009, Stuttgart : von der Technologie zur Anwendung / Jörg F. Wollert, (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 800)
Y1 - 2009
SN - 978-3-18-380010-0
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - CHAP
A1 - Buda, Aurel
A1 - Schneider, Ulf
A1 - Wollert, Jörg
T1 - Performanceanalyse von Frequenzdiversität in IEEE 802.15.4 Netzwerken
T2 - Wireless Technologies : 11. Kongress, 29. - 30. September 2009, Stuttgart; von der Technologie zur Anwendung / Jörg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 800)
Y1 - 2009
SN - 978-3-18-380010-0
SP - 29
EP - 38
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - BOOK
A1 - Wollert, Jörg
T1 - Wireless Technologies : 12. Kongress, 22. - 23. September 2010, Bochum ; von der Technologie zur Anwendung / Jörg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 810)
Y1 - 2010
SN - 978-3-18-381010-9
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - CHAP
A1 - Leidinger, Rafael
A1 - Schürmann, Volker
A1 - Wollert, Jörg
A1 - Schneider, Christoph
T1 - Entwicklungsprojekt BASic - Bluetooth Authentication Service
T2 - Wireless Technologies : 12. Kongress, 22. - 23. September 2010, Bochum ; von der Technologie zur Anwendung / Jörg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 810)
Y1 - 2010
SN - 978-3-18-381010-9
SP - 296
EP - 303
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - CHAP
A1 - Wollert, Jörg
T1 - Langzeitstatistische Untersuchungen zur Qualität von Funkkanälen für das industrielle Umfeld
T2 - Wireless technologies : von der Technologie zur Anwendung : 8. Kongress, 27. - 28. September 2006, Dortmund ( Jörg Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 772)
Y1 - 2006
SN - 3-18-377210-8
SP - 165
EP - 176
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - CHAP
A1 - Wollert, Jörg
T1 - Grundlagen Wireless - Was kann von Funktechnik erwartet werden?
T2 - Wireless technologies : von der Technologie zur Anwendung : 8. Kongress, 27. - 28. September 2006, Dortmund / Jörg Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 772)
Y1 - 2006
SN - 3-18-377210-8
SP - 314
EP - 323
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - BOOK
A1 - Wollert, Jörg
T1 - Wireless-Technologies-Kongress 2007 : von der Technologie zur Anwendung ; [wireless technologies, 9. Kongress, 18. - 19. September 2007, Stuttgart] / Hrsg. Jörg F. Wollert
Y1 - 2007
SN - 978-3-89838-084-3
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - BOOK
A1 - Wollert, Jörg
T1 - Wireless-Technologies-Kongress 2008 : von der Technologie zur Anwendung ; [wireless technologies, 10. Kongress, 23. - 24. September 2008, Bochum] / Hrsg. Jörg F. Wollert
Y1 - 2008
SN - 978-3-89838-608-1
PB - AKA
CY - Heidelberg
ER -
TY - CHAP
A1 - Röhrig, Christof
A1 - Großmann, Uwe
A1 - Künemund, Frank
A1 - Gansemer, Sebastian
A1 - Schürmann, Volker
A1 - Wollert, Jörg
T1 - Positionsbestimmung mittels Funktechnologien - Vergleich von Verfahren und Technologien mit exemplarischer Demonstration
T2 - Wireless-Technologies-Kongress 2008 : von der Technologie zur Anwendung / Hrsg. Jörg F. Wollert
Y1 - 2008
SN - 978-3-89838-608-1
SP - 337
EP - 348
PB - AKA
CY - Heidelberg
ER -
TY - CHAP
A1 - Wollert, Jörg
T1 - Technologischer Überblick - welches ist die richtige kabellose Technologie? Grenzen und Möglichkeiten der Funkübertragung sowie der konkreten Nutzung verschiedener Technolgien
T2 - Wireless-Technologies-Kongress 2008 : von der Technologie zur Anwendung / Hrsg. Jörg F. Wollert
Y1 - 2008
SN - 978-3-89838-608-1
SP - 349
PB - AKA
CY - Heidelberg
ER -
TY - CHAP
A1 - Wollert, Jörg
T1 - Grundlagen Wireless Technologie
T2 - Wireless Technologies : 12. Kongress, 22. - 23. September 2010, Bochum ; von der Technologie zur Anwendung / Jörg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 810)
Y1 - 2010
SP - 322
EP - 330
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - CHAP
A1 - Wollert, Jörg
T1 - Hybride arbeitspunktabhängige Beobachter zur intelligenten Modellierung und Regelung nichtlinearer Strecken
T2 - Fuzzy control : GMA-Aussprachetag ; Tagung Langen, 22. und 23. März 1994. (VDI-Berichte ; 1113)
Y1 - 1994
SN - 3-18-091113-1
SP - 497
EP - 506
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - JOUR
A1 - Pleßmann, K. W.
A1 - Wollert, Jörg
A1 - Fiedler, Jörg
T1 - Die ganzheitliche und objektorientierte Prozesssteuerung - eine Vision?
JF - CIM-Management : Produkte, Strategien, Entscheidungshilfen
Y1 - 1995
SN - 0179-2679
VL - 11
IS - 2
SP - 56
EP - 60
ER -
TY - JOUR
A1 - Fiedler, Jörg
A1 - Wollert, Jörg
T1 - Zeitmeister : Echtzeitbetriebssysteme für Mikrocontroller
JF - ELRAD : Magazin für Elektronik und technische Rechneranwendungen
Y1 - 1996
SN - 0170-1827
IS - 2
SP - 55
EP - 59
ER -
TY - JOUR
A1 - Wollert, Jörg
A1 - Fiedler, Jörg
T1 - atp-Marktanalyse Echtzeitbetriebssysteme
JF - Automatisierungstechnische Praxis : atp ; Praxis der Meß-, Steuerungs-, Regelungs- und Informationstechnik mit Softwaretechnik
Y1 - 1996
SN - 0340-4730
N1 - Printausg. in der Bibliothek vorhanden: 23 Z 324
VL - Bd. 38
IS - H. 1
SP - 33
EP - 44
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Voll im Bilde : Marktreport - Industrielle Bildverarbeitung
JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler
Y1 - 1997
SN - 0013-5658
N1 - Printausg. in der Bibliothek vorhanden: 63 ZS 030
VL - Bd. 46
IS - H. 2
SP - 62
EP - 67
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Zeitweise : Windows NT und die Echtzeit
JF - Elrad - Magazin für Elektronik und technische Rechneranwendungen
Y1 - 1997
SN - 0170-1827
IS - H. 4
SP - 71
EP - 73
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Doping für den Betriebssystem-Kern : Echtzeit-Lösungen für Windows NT im Vergleich
JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler
Y1 - 1997
SN - 0013-5658
N1 - Printausg. in der Bibliothek vorhanden: 63 ZS 030
VL - Bd. 46
IS - H. 20
SP - 46
EP - 50
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Feldbustechnologie
JF - Factory : der Durchblick in der Technik
Y1 - 2014
SP - Publ. online
PB - WEKA-Industriemedien
CY - Wien
ER -
TY - BOOK
A1 - Fiedler, Jörg
A1 - Wollert, Jörg
T1 - C für die Automatisierungspraxis : Grundlagen, Algorithmen, Beispiele
Y1 - 1993
SN - 3-18-401320-0
PB - Düsseldorf
CY - VDI-Verl.
ER -
TY - BOOK
A1 - Wollert, Jörg
T1 - Ein Beitrag zur kognitiven Modellierung regelungstechnischer Systeme unter Berücksichtigung heuristischer und analytischer Merkmale. (Fortschrittberichte VDI : Reihe 8, Meß-, Steuerungs- und Regelungstechnik ; 450)
Y1 - 1995
SN - 3-18-345008-9
N1 - Zugl.: Aachen, Techn. Hochsch., Diss., 1995
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - BOOK
A1 - Wollert, Jörg
A1 - Fiedler, Jörg
T1 - Automatisieren mit dem PC : Hardware, Software, Realisierung
Y1 - 1995
SN - 3-18-401318-9
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - BOOK
A1 - Wollert, Jörg
A1 - Fiedler, Jörg
T1 - Automatisieren mit dem PC. - 2. Aufl.
Y1 - 1998
SN - 3-540-63271-9
PB - Springer
CY - Berlin [u.a.]
ET - 2. Aufl.
ER -
TY - BOOK
A1 - Wollert, Jörg
T1 - Erfolgreich automatisieren unter Microsoft Windows : Technologie, Chancen, Grenzen und Lösungen für Automatisierungsaufgaben unter Windows
Y1 - 1999
SN - 3772354440
PB - Franzis
CY - Poing
ER -
TY - BOOK
A1 - Wollert, Jörg
T1 - Das Bluetooth Handbuch: Technologie, Software, Einsatzfelder, Systementwicklung, Wettbewerb
Y1 - 2002
SN - 3-7723-5323-1
PB - Franzis
CY - München
ER -
TY - CHAP
A1 - Wollert, Jörg
T1 - Bussysteme
T2 - Handbuch der Mess- und Automatisierungstechnik in der Produktion / Hans-Jürgen Gevatter ... (Hrsg.). - 2. Aufl.
Y1 - 2006
SN - 3-540-21207-8 ; 978-3-540-21207-2
SP - 475
EP - 653
PB - Springer
CY - Berlin [u.a.]
ER -
TY - BOOK
A1 - Wollert, Jörg
T1 - Wireless Technologies : 8. Kongress, 27. - 28. September 2006, Dortmund : von der Technologie zur Anwendung / Jörg Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 772)
Y1 - 2006
SN - 3-18-377210-8
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Alles automatisch : komplexes qualitätsorientiertes Logistikmanagement durch Vollautomatisierung
JF - Elektrotechnik für die Automatisierung
Y1 - 1998
SN - 0013-581X
VL - Bd. 80
IS - H. 4
SP - 196
EP - 199
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Zwergen-Anatomie : Aufbau von und Entwicklung für Windows CE
JF - C't : Magazin für Computertechnik
Y1 - 1998
SN - 0724-8679
IS - H. 8
SP - 148
EP - 151
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Für viele, viele bunte Smarties : komplexes qualitätsorientiertes Logistikmanagement durch Vollautomatisierung
JF - Fracht + Materialfluss : FM ; Technik und Praxis der Logistik
Y1 - 1998
SN - 1430-9807
VL - 30
IS - H. 6
SP - 30
EP - 32
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Komplexes qualitätsorientiertes Logistikmanagement durch Vollautomatisierung
JF - Dhf : Intralogistik ; Fachzeitschrift für Intralogistik
Y1 - 1998
SN - 0723-7901
VL - Bd. 44
IS - H. 1
SP - 14
EP - 16
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Die Produktionslogistik der Front- und Heckmodule für die Smart-Montage in Hambach
JF - Logistik für Unternehmen : das Fachmagazin der internen und externen Logistik
Y1 - 1998
SN - 0930-7834
N1 - Printausg. in der Bibliothek vorhanden: 43 Z 513
SP - 48
EP - 51
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Mit verwertbarem Aufwand : Portieren von Software auf Windows CE
JF - Elektrotechnik für die Automatisierung
Y1 - 1999
SN - 0013-581X
SP - 46
EP - 47
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Betriebssysteme im Wettlauf : Elan-Entwicklungsboard mit Win CE und QNX
JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler
Y1 - 1999
SN - 0013-5658
N1 - Printausg. in der Bibliothek vorhanden: 63 ZS 030
VL - Bd. 48
IS - H. 11
SP - 86
EP - 91
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Die Kunst des Weglassens : Windows NT Embedded - Was die neue Version vom Standard-NT unterscheidet
JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler
Y1 - 1999
SN - 0013-5658
N1 - Printausg. in der Bibliothek vorhanden: 63 ZS 030
VL - Bd. 48
IS - H. 23
SP - 116
EP - 121
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Ethernet in der Automatisierungstechnik ; 1: Herkömmliche Feldbusse im Vergleich zu Ethernet
JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler
Y1 - 2000
SN - 0013-5658
N1 - Printausg. in der Bibliothek vorhanden: 63 ZS 030
VL - Bd. 49
IS - H. 15
SP - 68
EP - 77
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Ethernet in der Automatisierungstechnik ; 2: Grenzen und Möglichkeiten des industriellen Ethernet-Einsatzes
JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler
Y1 - 2000
SN - 0013-5658
N1 - Printausg. in der Bibliothek vorhanden: 63 ZS 030
VL - Bd. 49
IS - H. 21
SP - 66
EP - 75
ER -
TY - BOOK
A1 - Merten, Sabine
T1 - Verbesserung der Ausbildung in der Mikrosystemtechnik - virtuelle Labore bereiten auf die Herstellung realer Drucksensoren vor (2 Fassungen: konvertiert und original
N2 - Die Ausbildung in Hochtechnologien wie beispielsweise der Mikrosystemtechnik ist oft durch einen hohen Grad an Komplexität charakterisiert. Damit verbunden sind hohe Kosten für die Errichtung und den Betrieb der speziellen Laborräume und ihre häufig geringe Verfügbarkeit für die Studierenden. Zukünftige Ingenieure sammeln während ihrer Ausbildung aus diesen Gründen nur in beschränktem Umfang praktische Erfahrungen. Die Industrie hingegen fordert Personal mit hoher fachlicher Kompetenz, also fundiertem theoretischen Wissen und umfangreichen praktischen Kenntnissen. Dieser Diskrepanz – qualifizierte Ingenieure auf der einen Seite und eine eher theoretisch ausgerichtete Ausbildung auf der anderen Seite – wird mit einem neuen Blended-Learning-Konzept für MST-Technologiepraktika begegnet. Lernende werden über ein virtuelles Labor, das einen echten Reinraum mit realen Anlagen simuliert, intensiv auf reale Laborpraktika vorbereitet. Dabei geht es im virtuellen Labor gleichermaßen um die Vermittlung von Theorie und Praxis. Nur trainierte Teilnehmer mit einer intensiven Vorbereitung sind in der Lage, relativ eigenständig ein echtes MST-Bauteil innerhalb des anschließenden einwöchigen Laborkurses zu fertigen. Die Wirksamkeit des Konzeptes und die Steigerung des Lernerfolges durch die kombinierten virtuellen und realen Laborkurse wurden im Rahmen der Dissertation begleitend untersucht. Die Ergebnisse flossen direkt in die Weiterentwicklung der Technologiepraktika ein. Die Konzepte und Erkenntnisse sind zudem sehr interessant für die Entwicklung von Blended-Learning-Angeboten in ähnlichen oder anderen Fachgebieten sowie für weitere Bildungseinrichtungen. (Die Dissertation liegt hier in 2 Fassungen vor: Die Originalfassung ist nur bei guter Rechnerausstattung und guter Netzanbindung nutzbar, die konvertierte Fassung ist unverändert, allerdings sind Qualitätseinbußen beim Ausdruck einiger Grafiken möglich)
N2 - Education in high technologies, like e.g. Microsystems technology, is usually characterized by a high degree of complexity. In addition it is usually connected with large economic efforts for invest, operation and maintenance of the special laboratory facilities. The access to such facilities for educational purposes is often quite limited. Therefore engineering students rather rarely gather practical experience in such technologies during their university studies. In contrast, industry has a large demand for engineers with high professional competence, i.e. profound theoretical knowledge combined with substantial practical experience. The newly developed blended learning concept for MST laboratory training tries to bridge the gap between the need for qualified engineers and the more theoretical university education. The learners prepare intensively for real hands-on clean room trainings with a virtual technology laboratory, i.e. a computer simulation of the clean room machines and the corresponding processes. In the virtual technology laboratory the students brush up their theoretical knowledge and at the same time learn to operate the complex clean room machines. Only well trained and intensively prepared students are capable to produce a fully functional MST component within a compact clean room laboratory course of only one week duration and an only modest amount of supervision. The effectivity of this concept and the increase of the learning success due to the specific mixture of virtual and real laboratory sessions has been accompanied and analysed by this dissertation. The results have been used to further improve the laboratory courses. Concepts and results are also very attractive for comparable blended learning proposals in other technical disciplines.
KW - Mikrosystemtechnik
KW - Virtuelles Laboratorium
KW - Lernprogramm
KW - Hochschule / Lehre / Evaluation
KW - Computersimulation
KW - Drucksensor
KW - Blended-Learning
KW - Reinraumpraktikum
KW - blended learning
KW - hands-on cleanroom training
Y1 - 2005
N1 - Zugl.: Saarbrücken, Univ., Diss., 2005
ER -
TY - CHAP
A1 - Gebhardt, Andreas
A1 - Schmidt, Frank-Michael
T1 - Farbige Prototypen als Werkzeug für den Konstrukteur
T1 - Colored prototypes as instrument for the constructing engineer
N2 - Physische Prototypen, also Anschauungs- und Funktionsmodelle nach den generativen oder Rapid Prototyping (RP) Verfahren haben sich in diesem Zusammenhang vor allem als Hilfsmittel zur effektiven Kommunikation und zur Evaluierung von Produkteigenschaften einen festen Platz in der Produktentstehung erworben. Die positiven Effekte der etablierten RP Verfahren sind unumstritten. Einfachere, schnellere und wirtschaftlichere Maschinen (Prototyper, Fabrikator), vor allem auch für die Büroumgebung, geben neue Impulse im Sinne der Optimierung der heutigen Verfahren. Eine neue Dimension verspricht die Option „Farbe“ der bisher fast ausschließlich monochromen Modelle. Ist Farbe nur „nice to have“ oder welchen Effekt haben farbige Modelle als Werkzeug von Konstrukteuren und Produktenwicklern? Welche Perspektiven bietet „Farbe“ darüber hinaus?
KW - Prototyping
KW - Rapid prototyping
KW - Prototypen
KW - Funktionsmodelle
KW - Produktentstehung
KW - Prototyper
KW - Produktenwicklung
KW - prototypes
KW - working models
KW - product emergence
KW - prototyper
KW - product development
Y1 - 2005
ER -
TY - CHAP
A1 - Merten, Sabine
A1 - Kämper, Klaus-Peter
A1 - Brill, Manfred
A1 - Picard, Antoni
A1 - Cassel, Detlev
A1 - Jentsch, Andreas
A1 - Rollwa, Markus
T1 - Virtuelle Sensor-Fertigung: Hightech mit LabVIEW
N2 - Eine neue Generation von Praktika an Hochschulen wächst heran. Moderne Wege beim Verstehen und Erlernen naturwissenschaftlicher Zusammenhänge sowie industrieller Fertigungsprozesse sind gefordert. Das Technologiepraktikum „Virtuelle Sensor- Fertigung“, entwickelt im Verbundprojekt INGMEDIA an den Fachhochschulen Aachen und Zweibrücken, trägt als neuartiges Lern- und Lehrmodul dieser Forderung Rechnung. Die Studierenden lernen einen vollständigen Fertigungsprozess mit Hilfe von virtuellen, in LabVIEW programmierten Maschinen kennen, bevor sie die reale Prozesskette im Reinraum durchführen.
N2 - A new generation of university laboratory courses is presently being developed. Modern concepts for the understanding and learning of applied science and industrial fabrication processes are required. The technology course “Fabrication of a microsensor”, developed by the Universities of Applied Sciences Aachen and Zweibrücken in the joint research project INGMEDIA, represents a new approach towards education in high technology production. The students learn the operation of the complex microfabrication line with the help of virtual fabrication machines, programmed in LabVIEW, before they perform the actual process in a genuine clean room.
KW - LabVIEW
KW - Virtuelle Sensor-Fertigung
KW - Fertigungsprozess
KW - virtuelle Maschinen
KW - virtual sensor fabrication
KW - manufacturing process
KW - virtual
KW - virtual machines
Y1 - 2003
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Übungsklausur zum Fach Werkstoffkunde 3
N2 - Übungsklausur
KW - Werkstoffkunde
KW - Fertigungsverfahren
KW - Übungsklausur
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Fertigungsverfahren I : Urformen ; Skript zur Vorlesung
N2 - Urformen aus dem flüssigen oder teigigen Zustand Im Mittelpunkt stehen alle Gießverfahren. Großtechnische Bedeutung haben neben den Metallgießverfahren vor allem auch Verfahren zum Urformen von Kunststoffen und in steigendem Maße auch solche zur Herstellung von Keramiken und Kompositwerkstoffen
KW - Fertigungsverfahren
KW - Urformen
KW - Gießen
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Fertigungsverfahren I : Umformen ; Skript zur Vorlesung
N2 - Grundlagen, Druck-Umformen (Walzen, Schmieden, Gesenkschmieden), Zugdruckumformen (Durchziehen, Tiefziehen), Zugumformen, Biegeumformen
KW - Umformverfahren
KW - Druck-Umformen
KW - Zugdruckumformen
KW - Zugumformen
KW - Biegeumformen
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Übungsklausur zum Fach Fertigungsverfahren 1
N2 - Übungsklausur
KW - Fertigungsverfahren
KW - Übungsklausur
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Regelungstechnik : Skript zur Vorlesung
N2 - Prinzip und Geschichte der Regelungstechnik; technische Steuerungen und Regelungen; Definition und Stellung innerhalb der Automatisierungstechnik. Elementare Übertragungsglieder, Streckentypen, typische Regler (unstetige Regler, stetige Regler), Reglerentwurf (einfache Verfahren, einschließlich Faustformelverfahren). Stabilitätsanalyse von Regelkreisen (einfache Verfahren, ohne Herleitung der Beweise)
KW - Regelungstechnik
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Digitale Regelungstechnik
N2 - Grundlagen (Prinzip, Komponenten, Abtastung, Aliasing) Algorithmus (Implementierung, Pseudo Code, Ermittlung der Faktoren) Beispiel
KW - Digitale Regelungstechnik
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Fuzzy Regelung
N2 - Überblick Fuzzy-Regler, Fuzzy Sets (Scharfe Mengen, Fuzzy Sets, Formen (stückweise linear, gaußförmig, glockenförmig), Eigenschaften (Gleichheit, Teilmenge)), Fuzzy Operatoren (NICHT, UND, ODER) Fuzzyfizierung Inferenzen (Verarbeitungsvorschrift, Ermittlung der aktiven Regeln, Ermittlung der Fuzzy Mengen, Überlagerung) Defuzzyfizierung (Mean-of-Maximum, Center-of-Gravity, Largest-of-Maximum, Smallest-of-Maximum, Center-of-Singletons) Entwurf, Beispiel, Fuzzy Tools, Internet, Literatur
KW - Regelungstechnik
KW - Fuzzy Regelung
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Übungsklausur zum Fach Regelungstechnik
N2 - Übungsklausur
KW - Regelungstechnik
KW - Übungsklausur
Y1 - 2005
ER -
TY - JOUR
A1 - Kämper, Klaus-Peter
A1 - Picard, Antoni
A1 - Brill, Manfred
A1 - Cassel, Detlev
A1 - Jentsch, Andreas
A1 - Merten, Sabine
A1 - Rollwa, Markus
T1 - The Virtual Clean Room - a new tool in teaching MST process technologies
N2 - The Virtual Clean Room - a new tool in teaching MST process technologies University education in high-technology fields like MST is not complete without intensive laboratory sessions. Students cannot fully grasp the complexity and the special problems related to the manufacturing of microsystems without a thorough hands-on experience in a MST clean room.
KW - Virtuelle Maschine
KW - VM
KW - Mikrosystemtechnik
KW - MST
KW - virtual clean room
Y1 - 2003
ER -
TY - GEN
A1 - Bellenberg, Markus
T1 - Optimierung einer Roboter-Schweißzelle als Basis eines E-Learning Systems
T1 - Optimization of a Robot-welding Station as the Basis for an E-Learning System
N2 - Ziel war die technische Überarbeitung und Optimierung des vorliegenden Prototypen, um eine Basis für ein E-Learning System (Internet unterstütztes Lernen) zu schaffen. Zu diesem Zweck wurde das Programm der Robotersteuerung neu erstellt, notwendige mechanische Änderungen an Roboterequipment und Materialförderung vorgenommen sowie eine neue Internet-Anbindung geschaffen. Wesentliche Ergebnisse der Arbeit sind: • Erzeugen roboterbasierter kreisinterpolierter Bahnschweißnähte • Kommunikation des Lernsystems via Internet • Lernorientierte Steuerungssoftware
N2 - The main goal of this final thesis was the revision and optimization of the given prototype as a basis for an E-Learning environment. All components of the system, including specific technical aspects, are discussed in order to create the basis for future training documentation. Similarly, the programs for the robot motion sequences and welding processes were renewed in order to create well-structured, clear and properly documented software that is suitable for use in a formal training program.
KW - Roboter
KW - MAG-Schweißen
KW - MIG-Schweißen
KW - Schweißen
KW - Mechatronik
KW - Kawasaki
KW - E-Learning
KW - Roboter-Schweißen
KW - welding
KW - welded joint
KW - mechatronics
Y1 - 2002
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Lasertechnologie : Laser - Materialbearbeitung ; Grundlagen - Verfahren - Anwendungen
N2 - Theoretische Grundlagen, Grundlagen der Materialbearbeitung mit Laserstrahlung, Aufbau und Funktion von Laser-Bearbeitungsanlagen, Laserstrahl-Schneiden, Laserstrahl-Schweißen, Laserstrahl-Bohren, Beschriften und Markieren mit dem Laser, Oberflächenveredeln mit dem Laser, Lasersicherheit, Umweltschutz
KW - Laser
KW - Materialbearbeitung
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Übungsklausur zum Fach Lasertechnologie
N2 - Übungsklausur
KW - Lasertechnologie
KW - Übungsklausur
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Lasermesstechnik 1
N2 - Strahlquelle, Verfahren, Triangulation, Interferometrie, Laufzeit, Lidar, Holographie, Speckle, Applikationen, Laseroptische Strömungsmessung, Laser Doppler Velocimetry, Particle Image Velocimetry
KW - Lasermesstechnik
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Lasermesstechnik 2
N2 - Laser-Doppler-Velozimetrie: Grundlagen, Referenzstrahlverfahren, Kreuzstrahlverfahren, Signalauswertung, Richtungserkennung, Mehrkomponentensysteme, Anwendungen
KW - Lasermesstechnik
KW - Laseroptische Strömungsmessung
KW - Laser-Doppler-Velozimetrie
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Zusammenfassung der Inhalte der Veranstaltung Lasertechnologie zur Vorbereitung auf die schriftliche Klausur
N2 - Grundlagen und Anwendungen
KW - Lasertechnologie
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Rapid Prototyping : Werkzeuge für die schnelle Produktentwicklung
N2 - Grundlagen der Rapid Prototyping-Verfahren Industrielle Rapid Prototyping Verfahren: Stereolithographie (SL), Lasersintern (SLS), Schicht- (Laminat) Verfahren (LLM), Extrusions-Verfahren (FLM), 3D-Printing (3DP) Abformverfahren und Folgeprozesse: Vakuumgießen, Gießharz-Werkzeuge, Vorserienwerkzeuge aus Aluminium
KW - Rapid Prototyping
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Short course on rapid prototyping
N2 - Rapid Prototyping Technology: Types of models, rapid prototyping processes, prototyper Fundamentals of rapid prototyping Industrial rapid prototyping technology: Stereolithography, (Selective) laser sintering ((S)LS), Layer laminate manufacturing (LLM), Fused layer modeling (FLM), Three dimensional printing (3DP)
KW - Rapid Prototyping
KW - Rapid Prototyping
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Zusammenfassung der Inhalte der Veranstaltung Rapid Prototyping zur Vorbereitung auf die schriftliche Klausur
N2 - Definition, Beschreibung der verschiedenen Verfahren, Anwendungsbeispiele
KW - Rapid Prototyping
KW - Rapid Prototyping
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Übungsklausur zum Fach Rapid Prototyping
N2 - Übungsklausur
KW - Rapid Prototyping
KW - Übungsklausur
KW - Rapid Prototyping
Y1 - 2005
ER -
TY - GEN
A1 - Gebhardt, Andreas
T1 - Werkstoffkunde III : Werkstoff- und Verfahrenskunde für die spanlosen Fertigungsverfahren, Pulvermetallurgie, Oberflächentechnik, Abtragen ; Skript zur Vorlesung
N2 - Werkstoff- und Verfahrenskunde für die spanlosen Fertigungsverfahren, Pulvermetallurgie, Oberflächentechnik, Abtragen Diffusionsvorgänge, Änderung der Stoffeigenschaften, Schutzschichtenbildung, Oberflächenhärten, Pulver-basierende Fertigungsverfahren (Pulvermetallurgie), Abtragende Verfahren
KW - Werkstoffkunde
KW - Spanlose Fertigungsverfahren
KW - Pulvermetallurgie
KW - Oberflächentechnik
KW - Abtragen
Y1 - 2005
ER -
TY - GEN
A1 - Kämper, Klaus-Peter
T1 - Skript zur Vorlesung Mikrotechnik 1
N2 - Kennwortgeschützter Zugang nur für Studierende bei Prof. Dr. Klaus-Peter Kämper. Sommersemester 2007. Version 2.3 vom 27.02.2007 I-8, 484 S.: Ill.; graph. Darst. Inhaltsverzeichnis: 1 Einführung: Was ist Mikrotechnik? 2 Fertigung im Reinraum 3 Der Werkstoff Silizium 4 Dünnschichttechnologie 5 Photolithographie 6 Ätztechnologie 7 „Bulk Micromachining“ 8 „Surface Micromachining“ 9 Trockenätzen tiefer Mikrostrukturen 10 LIGA-Technik 11 Mikrofunkenerosion 12 Laser in der Mikrotechnik 13 Mechanische Mikrofertigung 14 Photostruktuierbares Glas 15 Aufbau- und Verbindungstechnik
KW - Mikrosystemtechnik
Y1 - 2007
ER -
TY - CHAP
A1 - Merten, Sabine
A1 - Conrad, Thorsten
A1 - Kämper, Klaus-Peter
A1 - Picard, Antoni
A1 - Schütze, Andreas
T1 - Virtual Technology Labs - an efficient tool for the preparation of hands-on-MEMS-courses in training foundries
N2 - Hands-on-training in high technology areas is usually limited due to the high cost for lab infrastructure and equipment. One specific example is the field of MEMS, where investment and upkeep of clean rooms with microtechnology equipment is either financed by production or R&D projects greatly reducing the availability for education purposes. For efficient hands-on-courses a MEMS training foundry, currently used jointly by six higher education institutions, was established at FH Kaiserslautern. In a typical one week course, students manufacture a micromachined pressure sensor including all lithography, thin film and packaging steps. This compact and yet complete program is only possible because participants learn to use the different complex machines in advance via a Virtual Training Lab (VTL). In this paper we present the concept of the MEMS training foundry and the VTL preparation together with results from a scientific evaluation of the VTL over the last three years.
KW - Virtuelles Laboratorium
KW - Virtuelles Labor
KW - Hand-on-training
KW - Virtual Technology Lab
KW - MEMS ; education and training foundry
Y1 - 2006
ER -
TY - JOUR
A1 - Gebhardt, Andreas
T1 - Rapid Prototyping für metallische Werkstücke: Direkte und indirekte Verfahren
N2 - Die generative Herstellung von Kunststoffbauteilen hat im Gewand des Rapid Prototyping die Produktentwicklung nachhaltig positiv beeinflusst und ist im Begriff als Rapid Manufacturing die Fertigung zu revolutionieren. Je mehr sich die besonderen Eigenschaften generativ gefertigter Kunststoffbauteile herumsprechen, desto lauter wird der Ruf nach Metallbauteilen. Die Entwicklung entsprechender Prozesse läuft auf Hochtouren, kann aber bisher aber erst vereinzelt Erfolge vorweisen. Dabei wären es gerade die Metallbauteile, die ausgestattet mit den besonderen Merkmalen generativ gefertigter Werkstücke, in vielen Branchen einen deutlichen Entwicklungsschub auslösen könnten. Für den potenziellen Anwender ist dabei besonders verwirrend, dass die unterschiedlichsten Ansätze nebeneinander verfolgt werden. Im Folgenden soll daher der Versuche unternommen werden, dieses weite Feld systematisiert darzustellen und Möglichkeiten und Trends zu erläutern.
N2 - The generative manufacturing of plastic components via rapid prototyping has positively affected the product development. As 'rapid manufacturing' the method is about to revolutionize the manufacturing in general. The more the special characteristics of generative manufactured plastic components are getting about, the louder becomes the call for generative manufactured metal components. The development of analogical processes runs on full speed. So far however, only sporadic successes can be registered. Though there are in particular the metal components which could, equipped with the special characteristics of generative manufactured components, initiate a developmental boost in many industries. For the potential operator it is particularly confusing that the different approaches are traced parallel. Therefore in the following contribution the attempt is undertaken not only to represent this wide field in a systematic way but to describe possibilities and trends as well.
KW - Rapid prototyping
KW - Rapid Prototyping
KW - Rapid Manufacturing
KW - generative Fertigungsverfahren
KW - Werkzeugeinsätze
KW - Werkzeuge
KW - Rapid prototyping
KW - rapid manufacturing
Y1 - 2005
ER -
TY - JOUR
A1 - Gebhardt, Andreas
A1 - Brücker, Christoph
A1 - Schmidt, Frank-Michael
T1 - RP gestützte Herstellung komplexer transparenter Hohlräume für die Strömungsanalyse
N2 - Die Berechnung der Durchströmung von Bauteilen ist gegenüber derjenigen von umströmten Bauteilen deutlich im Hintertreffen. Das liegt vor allem an der fehlenden Verfügbarkeit geeigneter optisch transparenter Modellkanäle für die experimentelle Analyse. Der Beitrag stellt ein Verfahren zur Herstellung transparenter durchströmter Geometrien auf der Basis generativ gefertigter Urmodelle vor. Damit können beliebig komplexe Innenströmungen optisch analysiert werden. Anhand von zwei Beispielen aus der Medizin, der Modellierung der oberen Atemwege und des Bronchialbaums, wird das Verfahren vorgeführt. Der generative Bauprozess mittels 3D-Printing wird beschrieben und die Abformung in transparentem Silikon gezeigt. Schließlich werden beispielhaft der Messaufbau und Ergebnisse der Anwendung vorgestellt. Das Verfahren bildet die Grundlage für die Analyse und Berechnung komplexer Innenströmungen und trägt somit zur Verbesserung zahlreicher technischer Anwendungen bei.
N2 - Unlike the flow around technical products the interior flow is not understood very well. That’s mainly because of a lack of suitable transparent investigation tunnels that are needed to apply optical methods. The paper proposes a procedure to make precise complex hollow structures from a highly transparent material using masters from generative or Rapid Prototyping processes. Taking two examples from the medical field, the upper human airways and the bronchial tree, the entire process is shown. The 3D Printing build process is illustrated as well as the silicon casting process. Finally the measuring equipment is demonstrated and sample results are given. The process establishes the basis for the investigation and calculation of complex interior flow pattern and therefore contributes to a better understanding and consequently improvement of appropriate technical products.
KW - Rapid prototyping
KW - Rapid Prototyping
KW - Strömungsanalyse
KW - Innenströmung
KW - Modellkanäle
KW - 3D-Printing
Y1 - 2005
ER -
TY - JOUR
A1 - Gebhardt, Andreas
T1 - Rapid Manufacturing - eine interdisziplinäre Strategie
N2 - Als um 1987 ein Verfahren namens Stereolithographie und ein Stereolithography Apparatus (SLA) vorgestellt wurden, war der Traum von der Herstellung beliebiger dreidimensionaler Bauteile direkt aus Computerdaten und ohne bauteilspezifische Werkzeuge Realität geworden. Ein Anwendungs-Szenario wurde gleich mitgeliefert. Diese Technologie würde es möglich machen, die gesamte Ersatzteilversorgung der Amerikanischen Pazifikflotte mittels ein paar dieser Maschinen, umfangreicher Datenstätze und genügend Rohmaterial vor Ort auf einem Flugzeugträger direkt nach Bedarf zu fertigen. Diese Vorstellung definierte schon damals die direkte digitale Fertigung, das Rapid Manufacturing. In der Realität bestanden die mit diesem Verfahren hergestellten Bauteile nur aus Kunststoff, waren ungenau, bruchempfindlich und klebrig und allein in der Produktentwicklung, eben als Prototypen zu benutzen. Sie waren schnell verfügbar, weil zu Ihrer Herstellung keine Werkzeuge benötigt wurden. Folgerichtige und zudem modern hießen sie: Rapid Prototyping. Rapid Prototyping wurde schnell zum Synonym eines neuen Zweiges der Fertigungstechnik, der Generativen Fertigungstechnik. Die weitere Entwicklung brachte neue Verfahren, höhere Genauigkeiten, verbesserte Werkstoffe und neue Anwendungen. Die Herstellung von Negativen, also Werkzeugen, mit dem gleichen Verfahren wurde marketing-getrieben Rapid Tooling genannt und als die ersten Bauteile nicht mehr als Prototypen, sondern als Endprodukte eingesetzt wurden, nannte man dies Rapid Manufacturing - das Ziel war erreicht. War das Ziel wirklich erreicht? Ist es Rapid Manufacturing, wenn ein generativ gefertigtes Bauteil die gewünschte Spezifikation erreicht? Was muss passieren, damit aus dem Phänomen Rapid Prototyping eine Strategie wird, die geeignet ist, einen Paradigmenwechsel von der heutigen Hersteller-induzierten Massenproduktion von Massenartikeln zur Verbraucher-induzierten (und verantworteten) Massenproduktion von Einzelteilen für jedermann ermöglichen und möglicherweise unsere Arbeits- und Lebensformen tiefgreifend zu beeinflussen? Im Beitrag wird der Begriff der (Fertigungs-) Strategie „Rapid Manufacturing“ näher beleuchtet. Es wird diskutiert, welche Maßnahmen auf der technischen und der operative Ebene getroffen werden müssen, damit die generative Fertigungstechnik im Sinne dieser Strategie umgesetzt werden kann. Beispiele belegen, dass diese Entwicklung bereits begonnen hat und geben Anregungen für eine konstruktive Diskussion auf der RapidTech 2006.
N2 - As a process called stereolithography and a stereolithography apparatus (SLA) was presented in 1987, the dream of manufacturing any three-dimensional component directly from computer data and without component-specific tools became reality. An application scenario was supplied at the same time. This technology would make it possible to produce the entire spare parts requirement of the American Pacific Fleet merely through the use of a couple of such machines, extensive datasets and enough raw material on board an aircraft carrier directly as required. This image defined direct digital fabrication, rapid manufacturing, even at that time. In reality, this procedure only managed to produce components in plastic which were imprecise, fragile and sticky and only usable as prototypes in product development. They were rapidly available, because no tools were required for their manufacture. Consequentially, they are now known as Rapid Prototyping in modern jargon. Rapid Prototyping quickly became a synonym for a new branch of production engineering known as generative production engineering. Continued development brought new processes, improved accuracy, improved materials and new applications. The manufacturing of negatives, in other words tools, using the same procedure was quickly named rapid tooling by the marketing sector, and once the first components were used as final products instead of just prototypes the process was renamed "rapid manufacturing" - the goal had been reached. Was the goal really reached? Is it rapid manufacturing if a generatively manufactured component reaches the required specifications? What has to happen so that the rapid prototyping phenomenon becomes a strategy which is suitable for enabling the paradigm change from current manufacture-induced mass production of mass articles to consumer-induced (and consumer-responsible) mass production of single parts for anyone, and in all possibility makes dramatic changes in our way of working and living? The lecture includes detailed information about the (production) strategy term "rapid manufacturing". We will be discussing which measures need to be taken on the technical and operative level so that generative production engineering can be implemented in the sense of this strategy. Examples will show that this development has already started, and should provoke stimulation leading to constructive discussion during RapidTech 2006.
KW - Rapid prototyping
KW - Rapid Manufacturing
KW - Rapid Prototyping
KW - Stereolithographie
KW - Generative Fertigungstechnik
KW - Rapid prototyping
KW - rapid manufacturing
Y1 - 2006
ER -
TY - CHAP
A1 - Gebhardt, Andreas
T1 - Technology Diffusion through a Multi-Level Technology Transfer Infrastructure. Contribution to the 1st. All Africa Technology Diffusion Conference Boksburg, South Africa June 12th - 14th 2006
N2 - Table of contents 1. Introduction 2. Multi-level Technology Transfer Infrastructure 2.1 Level 1: University Education – Encourage the Idea of becoming an Entrepreneur 2.2 Level 2: Post Graduate Education – Improve your skills and focus it on a product family. 2.3 Level 3: Birth of a Company – Focus your skills on a product and a market segment. 2.4 Level 4: Ready to stand alone – Set up your own business 2.5 Level 5: Grow to be Strong – Develop your business 2.6 Level 6: Competitive and independent – Stay innovative. 3. Samples 3.1 Sample 1: Laser Processing and Consulting Centre, LBBZ 3.2 Sample 2: Prototyping Centre, CP 4. Funding - Waste money or even lost Money? 5. Conclusion
KW - Technologietransfer
KW - technology transfer
KW - technology diffusion
Y1 - 2006
ER -
TY - JOUR
A1 - Gebhardt, Andreas
T1 - Generative Manufacturing of Ceramic Parts "Vision Rapid Prototyping"
N2 - Table of Contents Introduction 1. Generative Manufacturing Processes 2. Classification of Generative Manufacturing Processes 3. Application of Generative Processes on the Fabrication of Ceramic Parts 3.1 Extrusion 3.2 3D-Printing 3.3 Sintering – Laser Sintering 3.4 Layer-Laminate Processes 3.5 Stereolithography (sometimes written: Stereo Lithography) 4. Layer Milling 5. Conclusion - Vision
KW - Rapid prototyping
KW - Rapid Technologie
KW - Rapid Prototyping
Y1 - 2006
ER -
TY - GEN
A1 - Kämper, Klaus-Peter
T1 - Lecture notes Sensors and Actuators
N2 - Kennwortgeschützter Zugang nur für Studierende bei Prof. Dr. Klaus-Peter Kämper. Wintersemester 2007/2008. Version vom 30.08.2007. 472 Seiten (pdf-Format)
N2 - Password necessarily. Access only for Students by Prof. Dr. Klaus-Peter Kämper. Winter semester 2007/2008. Version 2007-08-30. 472 pages (pdf) Contents 1. Introduction 2. Introduction to Sensors 3. Introduction to Microfabrication 4. Pressure Sensors 5. Acceleration Sensors 6. Angular Rate Sensors 7. Position Sensors 8. Flow Sensors 9. Piezoelectric Actuators 10. Magnetostrictive Actuators 11. Actuators based on Shape Memory Alloys 12. Actuators based on Electrorheological Fluids 13. Actuators based on Magnetorheological Fluids
KW - Sensor
KW - Aktor
KW - Sensoren
KW - Aktoren
KW - Sensores
KW - Actuators
KW - Microfabrication
Y1 - 2007
ER -
TY - JOUR
A1 - Gebhardt, Andreas
T1 - Grundlagen des Rapid Prototyping: Eine Kurzdarstellung der Rapid Prototyping Verfahren
N2 - Generative Verfahren sind seit etwa 1987 in den USA und seit etwa 1990 in Europa und Deutschland in Form von Rapid Prototyping Verfahren bekannt und haben sich in dieser Zeit von eher als exotisch anzusehenden Modellbauverfahren zu effizienten Werkzeugen für die Beschleunigung der Produktentstehung gewandelt. Mit der Weiterentwicklung der Verfahren und insbesondere der Materialien wird mehr und mehr das Feld der direkten Anwendung der Rapid Technologie zur Fertigung erschlossen. Rapid Technologien werden daher zum Schlüssel für neue Konstruktionssystematiken und Fertigungsstrategien.
N2 - Generative procedures have been known under the term of 'rapid prototyping method' for about 18 years in the USA and about 15 years in Europe and Germany. In this time they changed from what was regarded as being a rather exotic way of model construction procedures to a very efficient and useful instrument for faster product manufacturing. In the course of the further development of the methods, and in particular the materials, the field for direct application of rapid technology opens up for manufacturing. Therefore rapid technologies become the key for new construction systematics and manufacturing strategies.
KW - Rapid prototyping
KW - Laserstrahlsintern
KW - 3D-Printing
KW - Extrusionsverfahren
KW - Gießharzwerkzeuge
KW - Laminat Verfahren
KW - Lasersintern
KW - Stereolithographie
KW - Vakuumgießen
KW - FLM
KW - Fused deposition modelling
KW - Laminated-Object-Manufacturing
Y1 - 2004
ER -
TY - CHAP
A1 - Schürmann, Volker
A1 - Keller, Alex
A1 - Wollert, Jörg
T1 - Konvergenz von drahtlosen und drahtgebundenen Kommunikationstechnologien in der Gebäudeautomation
T2 - Wireless technologies : von der Technologie zur Anwendung ; 11. Kongress, 29. - 30. September 2009, Stuttgart / [11. Wireless-Technologies-Kongress]. (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 800)
Y1 - 2009
SN - 978-3-18-380010-0
SP - 197
EP - 205
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - IT ins Auto! IP im Ethernet und der USB können im Kfz gut genutzt werden
JF - Elektronik automotive : Magazin für Entwicklungen in der Kfz-Elektronik und Telematik
Y1 - 2008
SN - 1614-0125
IS - H. 9
SP - 46
EP - 51
ER -
TY - CHAP
A1 - Schürmann, Volker
A1 - Leidinger, R.
A1 - Wollert, Jörg
T1 - Simplified rapid-prototyping with automation technology
T2 - Automobiles and sustainable mobility : FISITA 2010 World Automotive Congress, 30 May - 4 June, Budapest, Hungary ; proceedings
Y1 - 2010
SN - 978-963-9058-29-3
SP - F2010C093
ER -
TY - CHAP
A1 - Stieglitz, Kristian
A1 - Wollert, Jörg
T1 - Database driven modernization and expansion of storage systems
T2 - Proceedings : the 3rd International Multi-Conference on Engineering and Technological Innovation : June 29th - July 2nd, 2010, Orlando, Florida, USA ; vol. 2
Y1 - 2010
SN - 978-1-936338-03-0
SP - 180
EP - 183
PB - IIIS
CY - Winter Garden, Fla.
ER -
TY - GEN
A1 - Wollert, Jörg
T1 - Neue Wege in der Kommunikation - Wireless Technologie für Automatisierungslösungen
Y1 - 2010
SP - 1
EP - 17
ER -
TY - CHAP
A1 - Buda, Aurel
A1 - Wollert, Jörg
T1 - Leistungsbewertung von Ultra Wideband Funktechnologien nach ECMA 368 für den Einsatz in industriellen Kommunikationssystemen
T2 - Kommunikation in der Automation : Magdeburg, 27. - 28.09.2011 ; 2. Jahreskolloquium Kommunikation in der Automation ; KOMMA 2011 / Ulrich Jumar ... (Hrsg.)
Y1 - 2011
SN - 978-3-940961-58-7
PB - ifak, Institut für Automation und Kommunikation e.V. Magdeburg an der Otto-von-Guericke-Universität Magdeburg
CY - Magdeburg
ER -
TY - JOUR
A1 - Leidinger, Rafael
A1 - Noisten, Thomas
A1 - Wollert, Jörg
T1 - Realtime automation networks in moVing industrial environments
JF - Journal of systemics, cybernetics and informatics
N2 - The radio-based wireless data communication has made the realization of new technical solutions possible in many fields of the automation technology (AT). For about ten years, a constant disproportionate growth of wireless technologies can be observed in the automation technology.
However, it shows that especially for the AT, conventional technologies of office automation are unsuitable and/or not manageable. The employment of mobile services in the industrial automation technology has the potential of significant cost and time savings. This leads to an increased productivity in various fields of the AT, for example in the factory and process automation or in production logistics. In this paper technologies and solutions for an automation-suited supply of mobile wireless services will be introduced under the criteria of real time suitability, IT-security and service orientation.
Emphasis will be put on the investigation and development of wireless convergence layers for different radio technologies, on the central provision of support services for an easy-to-use, central, backup enabled management of combined wired / wireless networks and on the study on integrability in a Profinet real-time Ethernet network.
KW - PROFINET
KW - Distributed Control Systems,
KW - Industrial Automation Technology,
KW - 802.15.4
KW - Bluetooth
KW - Wireless Networks
Y1 - 2012
SN - 1690-4532
VL - Vol. 10
IS - Iss. 2
SP - 52
EP - 56
PB - IIIC
CY - Orlando
ER -
TY - CHAP
A1 - Stieglitz, Kristian
A1 - Wollert, Jörg
T1 - Approach of using ultra-wideband-radio in industrial real-time ethernet networks
T2 - The 4th International Multi-Conference on Engineering and Technological Innovation : IMETI : July 19th - July 22nd, 2011, Orlando, Florida, USA
Y1 - 2011
SP - 1
EP - 6
ER -
TY - CHAP
A1 - Wollert, Jörg
T1 - The performance of UWB-communication in an industrial environment
T2 - IEEE 1st International Symposium on Wireless Systems : (IDAACS-SWS) : Offenburg, 20-21 Sept. 2012
Y1 - 2012
SN - 978-1-4673-4678-8
U6 - http://dx.doi.org/10.1109/IDAACS-SWS.2012.6377639
SP - 85
EP - 90
PB - IEEE
CY - Piscataway, NJ
ER -
TY - JOUR
A1 - Wollert, Jörg
A1 - Buda, Aurel
T1 - Funklösungen im parallelen Betrieb
JF - Intelligenter produzieren : die Wissensplattform für das technische Management
Y1 - 2009
SN - 1869-2745
IS - H. 4
SP - 6
EP - 8
PB - VDMA-Verl.
CY - Frankfurt, M.
ER -
TY - CHAP
A1 - Wollert, Jörg
A1 - Rau, S.
T1 - Performance von embedded WLAN-Systemen bei koexistierenden Netzwerken
T2 - KOMMA 2012 : Kommunikation in der Automation : 3. Jahreskolloquium Kommunikation in der Automation : Lemgo, 14.11.2012 / Jürgen Jasperneite ... (Hrsg.)
Y1 - 2012
SN - 978-3-9814062-2-1
PB - Inst. für Industrielle Informationstechnik
CY - Lemgo
ER -
TY - CHAP
A1 - Wollert, Jörg
A1 - Rau, Sebastian
T1 - Energietransparenz und optimierter Energieverbrauch durch ganzheitliche Automatisierungskonzepte
T2 - Smart Energy 2012 : wie smart ist der Weg zur Energiewende? / Uwe Großmann, Ingo Kunold (Hrsg.)
Y1 - 2012
SN - 978-3-86488-030-8
SP - 109
EP - 122
PB - Hülsbusch
CY - Glückstadt
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Schlaue Produktion von smarten Autos : hinter der Smart-Produktion steckt ein innovatives Logistikkonzept
JF - Technica
Y1 - 1999
SN - 0040-866X
VL - Bd. 48
IS - H. 4
SP - 20
EP - 23
ER -
TY - JOUR
A1 - Heptner, K.
A1 - Wollert, Jörg
T1 - FML-Report - VDI-Richtlinie 4485 'E-Commerce und Logistik'
JF - Logistik für Unternehmen : das Fachmagazin der internen und externen Logistik
Y1 - 2005
SN - 0930-7834
N1 - Printausg. in der Bibliothek vorhanden: 43 Z 513
VL - 19
SP - 58
EP - 59
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Softwaretrends in der Automatisierungstechnik
JF - Etz : Elektrotechnik & Automation ; Organ des VDE Verband der Elektrotechnik Elektronik Informationstechnik e.V. und der Energietechnischen Gesellschaft im VDE (ETG) und der VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)
Y1 - 2005
SN - 0948-7387
N1 - Printausgabe in der Bibliothek vorhanden: 63 ZS 035; 23 Z 133
VL - 126
IS - S2
SP - 74
EP - 79
ER -
TY - CHAP
A1 - Buschkühle, Peter
A1 - Schürmann, Volker
A1 - Wollert, Jörg
T1 - Abstraction of wireless communication by a convergence middleware in conjunction with a XML-configuration
T2 - Information technology and electrical engineering : devices and systems, materials and technologies for the future ; Ilmenau 07 - 10 September 2009 ; 54. IWK Internationales Wissenschaftliches Kolloquium
Y1 - 2009
SN - 978-3-938843-44-4
SP - 95
EP - 96
PB - Techn. Univ.
CY - Ilmenau
ER -
TY - JOUR
A1 - Wollert, Jörg
T1 - Die nächste "Generation Wireless" : Kommunikation mit hoher Bandbreite wird mobil
JF - Elektronik : Fachmedium für industrielle Anwender und Entwickler ; Sonderh. Wireless : Fachmedium für Entwicklungen funkbasierter Systeme
Y1 - 2005
SN - 0013-5658 ; 1611-5120
N1 - Printausgabe in der Bibliothek vorhanden: 23 Z 263; 63 ZS 030
IS - H. 2
SP - 40
EP - 44
ER -
TY - CHAP
A1 - Buda, Aurel
A1 - Wollert, Jörg
T1 - Kompensation von Fading und Koexistenzproblemen in IEEE 802.15.4 Netzwerken durch Diversität : die Kombination macht's möglich
T2 - Automation 2008: Lösungen für die Zukunft ; der Automatisierungskongress in Deutschland ; Tagung Baden-Baden, 3. und 4. Juni 2008. (VDI-Berichte ; 2032)
Y1 - 2008
SN - 978-3-18-092032-0
SP - 139
EP - 142
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - CHAP
A1 - Schürmann, Volker
A1 - Wollert, Jörg
T1 - Ortsbezogene Fernwartungsdienste mit Bluetooth Ranging und Java Micro Edition
T2 - Automation 2008: Lösungen für die Zukunft ; der Automatisierungskongress in Deutschland ; Tagung Baden-Baden, 3. und 4. Juni 2008. (VDI-Berichte ; 2032)
Y1 - 2008
SN - 978-3-18-092032-0
SP - 353
EP - 356
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - CHAP
A1 - Schürmann, Volker
A1 - Wollert, Jörg
T1 - Location based Services in der Gebäudeautomation
T2 - Wireless Technologies Kongress 2008: von der Technologie zur Anwendung ; [10. Kongress, 23. - 24. September 2008, Bochum]
Y1 - 2008
SN - 978-3-89838-608-1
SP - 313
EP - 322
PB - Aka
CY - Heidelberg
ER -
TY - CHAP
A1 - Buda, Aurel
A1 - Schürmann, Volker
A1 - Wollert, Jörg
T1 - A middleware approach for industrial wireless automation networks
T2 - Proceedings of the Eighth IASTED International Conference on Wireless & Optical Communications : May 26 - 28, 2008, Québec City, Quebec, Canada
Y1 - 2008
SN - 978-0-88986-743-7
SP - 76
EP - 82
PB - Acta Pr.
CY - Anaheim, Calif.
ER -
TY - CHAP
A1 - Schürmann, Volker
A1 - Buda, Aurel
A1 - Wollert, Jörg
T1 - XML-based Middleware approach for industrial wireless communication systems
T2 - IEEE International Conference on Emerging Technologies and Factory Automation, 2008 : ETFA 2008 ; 15 - 18 Sept., 2008, Hamburg, Germany
Y1 - 2008
SN - 978-1-4244-1505-2
U6 - http://dx.doi.org/10.1109/ETFA.2008.4638463
SP - 632
EP - 639
PB - IEEE
CY - Piscataway, NJ
ER -
TY - CHAP
A1 - Schürmann, Volker
A1 - Keller, Alex
A1 - Wollert, Jörg
T1 - Internet based middleware approach for building services
T2 - Proceedings / IMETI 2009, the 2nd International Multi-Conference on Engineering and Technological Innovation : July 10 - 13, 2009 Orlando, Florida, USA ; vol. 1
Y1 - 2009
SN - 1-934272-68-X ; 978-1-934272-68-8
SP - 30
EP - 34
PB - IIIS
CY - Winter Garden, Fla.
ER -
TY - CHAP
A1 - Schürmann, Volker
A1 - Mann, Thorsten
A1 - Buda, Aurel
A1 - Wollert, Jörg
T1 - Integrating bluetooth localization into existing TCP/IP networks
T2 - IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, 2009 : IDAACS 2009 ; Rende, Cosenza, Italy, 21 - 23 Sept. 2009
Y1 - 2009
SN - 978-1-4244-4882-1 ; ISBN: 978-1-4244-4901-9
U6 - http://dx.doi.org/10.1109/IDAACS.2009.5342903
SP - 621
EP - 624
PB - IEEE
CY - Piscataway, NJ
ER -
TY - CHAP
A1 - Buda, Aurel
A1 - Schürmann, Volker
A1 - Wollert, Jörg
T1 - Funktechnologien im 2,45 GHz ISM Frequenzband: Überblick und Coexistenzeigenschaften
T2 - Automation 2009 : Automatisierungskongress in Deutschland ; Kongress Baden-Baden, 16. und 17. Juni 2009. (VDI-Berichte ; 2067)
Y1 - 2009
SN - 978-3-18-092067-2
SP - 383
EP - 386
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - CHAP
A1 - Buda, Aurel
A1 - Wollert, Jörg
A1 - Vedral, Andreas
T1 - UWIfac - Ultra wideband interface for factory automation
T2 - Automation 2009 : Automatisierungskongress in Deutschland ; Kongress Baden-Baden, 16. und 17. Juni 2009. (VDI-Berichte ; 2067)
Y1 - 2009
SN - 978-3-18-092067-2
SP - 257
EP - 260
PB - VDI-Verl.
CY - Düsseldorf
ER -
TY - CHAP
A1 - Vedral, Andreas
A1 - Wollert, Jörg
A1 - Buda, A.
A1 - Altrock, R.
T1 - The capability of bluetooth for real-time transmission in automation
T2 - Proceedings of the IASTED International Conference on Networks and Communication Systems 2006 : March 29 - 31, 2006, Chiang Mai, Thailand
Y1 - 2006
SP - 168
EP - 175
PB - Acta Pr.
CY - Anaheim, Calif.
ER -