TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Shielding gas influences on laser weldability of tailored blanks of advanced automotive steels
JF  - Applied surface science
N2  - The effects of shielding gas types and flow rates on CO2 laser weldability of DP600/TRIP700 steel sheets were studied in this work. The evaluated shielding gases were helium (He), argon (Ar) and different mixtures of He and Ar. Weld penetration, tensile strength and formability (Erichsen test) of laser welds were found to be strongly dependent upon the shielding gas types. The ability of shielding gas in removing plasma plume and thus increasing weld penetration is believed to be closely related to ionization potential and atomic weight which determine the period of plasma formation and disappearance. It was found that the higher helium shielding gas flow rate, the deeper weld penetration and the lower weld width.
Y1  - 2010
U6  - https://doi.org/10.1016/j.apsusc.2010.08.042
SN  - 0169-4332 (E-Journal); 0169-4332 (Print)
VL  - 257
IS  - 5
SP  - 1401
EP  - 1406
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Mukherjee, Krishnendu
A1  - Ramazani, Ali
A1  - Yang, Li
A1  - Prahl, Ulrich
A1  - Bleck, Wolfgang
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
T1  - Characterization of gas metal arc welded hot rolled DP600 steel
JF  - Steel research international
Y1  - 2011
SN  - 1869-344X (E-Book); 1611-3683 (Print)
VL  - Vol. 82
IS  - Iss. 12
SP  - 1408
EP  - 1416
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Glowania, Michael
A1  - Gries, Thomas
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Innovative coating technology for textile reinforcements of concrete applications
JF  - 13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)
Y1  - 2011
SN  - 978-3-03785-008-4
SN  - 1013-9826 (E-Journal) ; 0252-1059 (Print)
SP  - 167
EP  - 173
PB  - Trans Tech Publications
CY  - Bäch
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Numerical and experimental investigation of tensile behavior of laser beam welded TRIP700 steel
JF  - ISIJ international
Y1  - 2011
SN  - 1347-5460 (E-Journal); 0915-1559 (Print)
VL  - Vol. 51
IS  - No. 3
SP  - 429
EP  - 434
PB  - ISIJ
CY  - Tōkyō
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Harms, Alexander
A1  - Schiebahn, Alexander
A1  - Naumov, Andreas
T1  - Erweiterung des Parameterfelds zum Rührreibschweißen mittels konduktiver Unterstützung
JF  - Schweissen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren
Y1  - 2011
SN  - 0036-7184
VL  - Bd. 63
IS  - H. 12
SP  - 710
EP  - 714
PB  - DVS-Media GmbH
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Harms, Alexander
A1  - Schiebahn, Alexander
A1  - Thiele, Regina
ED  - Kampker, Achim
T1  - Elektromobilität - Herausforderungen an die Fügetechnik
JF  - mobilität morgen - Magazin zu Mobilität und Elektromobilität
Y1  - 2011
VL  - Jg. 1
IS  - Nr. 2
SP  - 16
EP  - 17
ER  - 
TY  - JOUR
A1  - Roesner, Andreas
A1  - Scheik, Sven
A1  - Olowinsky, Alexander
A1  - Gillner, Arnold
A1  - Propawe, Reinhart
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Innovative approach of joining hybrid components
JF  - Journal of laser applications
Y1  - 2011
SN  - 1042-346X
VL  - Vol. 23
IS  - Iss. 3
SP  - 32007
PB  - Laser Institute of America
CY  - Orlando, Fla.
ER  - 
TY  - JOUR
A1  - Schleser, Markus
A1  - Walk-Lauffer, Bernd
A1  - Raupach, Michael
A1  - Dilthey, Ulrich
T1  - Application of polymers for textile-reinforced concrete
JF  - Journal of materials in civil engineering : properties, applications, durability
Y1  - 2006
SN  - 0899-1561
VL  - 18
IS  - 5
SP  - 670
EP  - 676
ER  - 
TY  - JOUR
A1  - Feldmann, Markus
A1  - Pak, Daniel
A1  - Geßler, Achim
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
T1  - Bonded connections for textile reinforced concrete structures
JF  - Cailiao-gongcheng = Journal of materials engineering
Y1  - 2006
SN  - 1001-4381
IS  - Special iss.
SP  - 123
EP  - 127
ER  - 
TY  - JOUR
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Hanisch, Vera
A1  - Gries, Thomas
T1  - Garnzugprüfung polymergetränkter Textilien für die Bewehrung von Beton
JF  - Technische Textilien
Y1  - 2006
SN  - 0323-3243
VL  - 49
IS  - 1
SP  - 48
EP  - 50
ER  - 
TY  - JOUR
A1  - Feldmann, Markus
A1  - Pak, Daniel
A1  - Geßler, Achim
A1  - Schleser, Markus
T1  - Entwicklung eines Bemessungsmodells für punktförmige Verbindungen textibewehrter Betonbauteile
JF  - Bautechnik : Zeitschrift für den gesamten Ingenieurbau
Y1  - 2008
SN  - 0005-6820, 0341-1052, 0932-6359, 0932-8351, 0932-8351
N1  - Printausg. in der Bibliothek der FH Aachen vorhanden: 13 Z 177
VL  - Bd. 85
IS  - 2
SP  - 143
EP  - 147
ER  - 
TY  - JOUR
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Feldmann, Martin
A1  - Pak, Daniel
A1  - Geßler, Achim
T1  - Investigation of punctiform, plane and hybrid joints of textile-reinforced concrete parts
JF  - Cement and concrete composites
Y1  - 2008
SN  - 0958-9465
VL  - Vol. 30
IS  - iss. 2
SP  - 82
EP  - 87
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Feldmann, Martin
A1  - Pak, Daniel
A1  - Geßler, Achim
T1  - Kleben dünnwandiger Bauteile aus textilbewehrtem Beton
JF  - Schweissen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren
Y1  - 2008
SN  - 0036-7184
VL  - Bd. 60
IS  - H. 7/8
SP  - 408
EP  - 412
ER  - 
TY  - JOUR
A1  - Dilthey, Ulrich
A1  - Brandenburg, Annette
A1  - Schleser, Markus
T1  - Dispensing and application of unfilled adhesives in the micro range
JF  - Welding and cutting. 3 (2004), H. 4
Y1  - 2004
SN  - 1612-3433
SP  - 250
EP  - 254
ER  - 
TY  - JOUR
A1  - Sedlacek, G.
A1  - Schätzke, C.
A1  - Geßler, M.
A1  - Schleser, Markus
T1  - Fügen von Bauteilen aus textilbewehrtem Beton
JF  - Der Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik.  Bd. 79 (2004), H. 12
Y1  - 2004
SN  - 0005-6650
N1  - Printausg. in der Bibliothek der FH Aachen vorhanden: 13 Z 049-2004
SP  - 569
EP  - 575
ER  - 
TY  - JOUR
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Geßler, Achim
A1  - Rettweiler, Timo
A1  - Völling, Boris
T1  - Kleben textilbewehrter Betonbauteile
JF  - Schweissen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren. Jg. 57 (2005), Nr. 8
Y1  - 2005
SN  - 0036-7184
SP  - 373
EP  - 377
ER  - 
TY  - JOUR
A1  - Roesner, Andreas
A1  - Scheik, Sven
A1  - Olowinsky, Alexander
A1  - Gillner, Arnold
A1  - Reisgen, Uwe
A1  - Schleser, Markus
T1  - Laser assisted joining of plastic metal hybrids
JF  - Lasers in manufacturing 2011 : proceedings of the sixth International WLT Conference on Lasers in Manufacturing, Munich, May 23 - 26 2011. (Physics procedia ; Vol. 12 (2011), Part B)
Y1  - 2011
SN  - 1875-3892 (E-Journal); 1875-3884 (Print)
SP  - 370
EP  - 377
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Zabirov, Alexander
T1  - Virtual welding equipment for simulation of GMAW processes with integration of power source regulation
JF  - Frontiers of materials science
Y1  - 2011
SN  - 2095-0268 (E-Journal); 2095-025X (Print)
VL  - Vol. 5
IS  - Iss. 2
SP  - 79
EP  - 89
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Statistical modeling of laser welding of DP/TRIP steel sheets
JF  - Optics and laser technology
N2  - In this research work, a statistical analysis of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets was done using response surface methodology. The analysis considered the effect of laser power (2–2.2 kW), welding speed (40–50 mm/s) and focus position (−1 to 0 mm) on the heat input, the weld bead geometry, uniaxial tensile strength, formability limited dome height and welding operation cost. The experimental design was based on Box–Behnken design using linear and quadratic polynomial equations for predicting the mathematical models. The results indicate that the proposed models predict the responses adequately within the limits of welding parameters being used and the welding speed is the most significant parameter during the welding process.
Y1  - 2012
U6  - https://doi.org/10.1016/j.optlastec.2011.05.025
SN  - 1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)
VL  - 44
IS  - 1
SP  - 92
EP  - 101
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Optimization of laser welding of DP/TRIP steel sheets using statistical approach
JF  - Optics and laser technology
N2  - Generally, the quality of a weld joint is directly influenced by the welding input parameter settings. Selection of proper process parameters is important to obtain the desired weld bead profile and quality. In this research work, numerical and graphical optimization techniques of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets were carried out using response surface methodology (RSM) based on Box–Behnken design. The procedure was established to improve the weld quality, increase the productivity and minimize the total operation cost by considering the welding parameters range of laser power (2–2.2 kW), welding speed (40–50 mm/s) and focus position (−1 to 0 mm). It was found that, RSM can be considered as a powerful tool in experimental welding optimization, even when the experimenter does not have a model for the process. Strong, efficient and low cost weld joints could be achieved using the optimum welding conditions.
Y1  - 2012
U6  - https://doi.org/10.1016/j.optlastec.2011.06.028
SN  - 1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)
VL  - 44
IS  - 1
SP  - 255
EP  - 262
PB  - Elsevier
CY  - Amsterdam
ER  -