TY  - CHAP
A1  - Engemann, Heiko
A1  - Badri, Sriram
A1  - Wenning, Marius
A1  - Kallweit, Stephan
T1  - Implementation of an Autonomous Tool Trolley in a Production Line
T2  - Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980
Y1  - 2019
SN  - 978-3-030-19648-6
U6  - http://dx.doi.org/10.1007/978-3-030-19648-6_14
SP  - 117
EP  - 125
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Engemann, Heiko
A1  - Wiesen, Patrick
A1  - Kallweit, Stephan
A1  - Deshpande, Harshavardhan
A1  - Schleupen, Josef
T1  - Autonomous mobile manipulation using ROS
T2  - Advances in Service and Industrial Robotics
Y1  - 2018
SN  - 978-3-319-61276-8
U6  - http://dx.doi.org/10.1007/978-3-319-61276-8_43
N1  - International Conference on Robotics in Alpe-Adria Danube Region RAAD 2017;
Mechanisms and Machince Science book series, Vol 49.
SP  - 389
EP  - 401
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Michaux, F.
A1  - Mattern, P.
A1  - Kallweit, Stephan
T1  - RoboPIV: how robotics enable PIV on a large industrial scale
JF  - Measurement Science and Technology
N2  - This work demonstrates how the interaction between particle image velocimetry (PIV) and robotics can massively increase measurement efficiency. The interdisciplinary approach is shown using the complex example of an automated, large scale, industrial environment: a typical automotive wind tunnel application. Both the high degree of flexibility in choosing the measurement region and the complete automation of stereo PIV measurements are presented. The setup consists of a combination of three robots, individually used as a 6D traversing unit for the laser illumination system as well as for each of the two cameras. Synchronised movements in the same reference frame are realised through a master-slave setup with a single interface to the user. By integrating the interface into the standard wind tunnel management system, a single measurement plane or a predefined sequence of several planes can be requested through a single trigger event, providing the resulting vector fields within minutes.

In this paper, a brief overview on the demands of large scale industrial PIV and the existing solutions is given. Afterwards, the concept of RoboPIV is introduced as a new approach. In a first step, the usability of a selection of commercially available robot arms is analysed. The challenges of pose uncertainty and importance of absolute accuracy are demonstrated through comparative measurements, explaining the individual pros and cons of the analysed systems. Subsequently, the advantage of integrating RoboPIV directly into the existing wind tunnel management system is shown on basis of a typical measurement sequence. In a final step, a practical measurement procedure, including post-processing, is given by using real data and results. Ultimately, the benefits of high automation are demonstrated, leading to a drastic reduction in necessary measurement time compared to non-automated systems, thus massively increasing the efficiency of PIV measurements.
Y1  - 2018
U6  - http://dx.doi.org/10.1088/1361-6501/aab5c1
SN  - 1361-6501
N1  - Special Section on the 12th International Symposium on Particle Image Velocimetry (PIV 2017)
VL  - 29
IS  - 7
SP  - 074009
PB  - IOP
CY  - Bristol
ER  - 
TY  - JOUR
A1  - Kunkel, Maximilian Hugo
A1  - Gebhardt, Andreas
A1  - Mpofu, Khumbaulani
A1  - Kallweit, Stephan
T1  - Statistical assessment of mechanical properties of selective laser melted specimens of stainless steel
JF  - The International Journal of Advanced Manufacturing Technology
N2  - The rail business is challenged by long product life cycles and a broad spectrum of assembly groups and single parts. When spare part obsolescence occurs, quick solutions are needed. A reproduction of obsolete parts is often connected to long waiting times and minimum lot quantities that need to be purchased and stored. Spare part storage is therefore challenged by growing stocks, bound capital and issues of part ageing. A possible solution could be a virtual storage of spare parts which will be 3D printed through additive manufacturing technologies in case of sudden demand. As mechanical properties of additive manufactured parts are neither guaranteed by machine manufacturers nor by service providers, the utilization of this relatively young technology is impeded and research is required to address these issues. This paper presents an examination of mechanical properties of specimens manufactured from stainless steel through the selective laser melting (SLM) process. The specimens were produced in multiple batches. This paper interrogates the question if the test results follow a normal distribution pattern and if mechanical property predictions can be made. The results will be put opposite existing threshold values provided as the industrial standard. Furthermore, probability predictions will be made in order to examine the potential of the SLM process to maintain state-of-the-art mechanical property requirements.
Y1  - 2018
U6  - http://dx.doi.org/10.1007/s00170-018-2040-8
SN  - 0268-3768
VL  - 98
IS  - 5-8
SP  - 1409
EP  - 1431
PB  - Springer
CY  - London
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Schiffer, Stefan
A1  - Kallweit, Stephan
T1  - The ROSIN Education Concept - Fostering ROS Industrial-Related Robotics Education in Europe
T2  - ROBOT 2017: Third Iberian Robotics Conference
Y1  - 2018
SN  - 978-3-319-70836-2
U6  - http://dx.doi.org/10.1007/978-3-319-70836-2_31
N1  - Advances in Intelligent Systems and Computing, vol 694;
(AISC, volume 694)
SP  - 370
EP  - 381
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Wiesen, Patrick
A1  - Engemann, Heiko
A1  - Limpert, Nicolas
A1  - Kallweit, Stephan
T1  - Learning by Doing - Mobile Robotics in the FH Aachen ROS Summer School
T2  - European Robotics Forum 2018, TRROS18 Workshop
Y1  - 2018
SP  - 47
EP  - 58
ER  - 
TY  - CHAP
A1  - Schleupen, Josef
A1  - Engemann, Heiko
A1  - Bagheri, Mohsen
A1  - Kallweit, Stephan
A1  - Dahmann, Peter
T1  - Developing a climbing maintenance robot for tower and rotor blade service of wind turbines
T2  - Advances in Robot Design and Intelligent Control : Proceedings of the 25th Conference on Robotics in Alpe-Adria-Danube Region (RAAD16)
Y1  - 2017
SN  - 978-3-319-49058-8
U6  - http://dx.doi.org/10.1007/978-3-319-49058-8_34
N1  - Advances in Robot Design and Intelligent Control ; Vol. 540
SP  - 310
EP  - 319
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Kallweit, Stephan
A1  - Gottschalk, Michael
A1  - Walenta, Robert
T1  - ROS based safety concept for collaborative robots in industrial applications
T2  - Advances in robot design and intelligent control : proceedings of the 24th International Conference on Robotics in Alpe-Adria-Danube Region (RAAD). (Advances in intelligent systems and computing ; 371)
N2  - The production and assembly of customized products increases the demand for flexible automation systems. One approach is to remove the safety fences that separate human and industrial robot to combine their skills. This collaboration possesses a certain risk for the human co-worker, leading to numerous safety concepts to protect him. The human needs to be monitored and tracked by a safety system using different sensors. The proposed system consists of a RGBD camera for surveillance of the common working area, an array of optical distance sensors to compensate shadowing effects of the RGBD camera and a laser range finder to detect the co-worker when approaching the work cell. The software for collision detection, path planning, robot control and predicting the behaviour of the co-worker is based on the Robot Operating System (ROS). A first prototype of the work cell shows that with advanced algorithms from the field of mobile robotics a very flexible safety concept can be realized: the robot not simply stops its movement when detecting a collision, but plans and executes an alternative path around the obstacle.
KW  - Collaborative robot
KW  - Human-Robot interaction
KW  - Safety concept
KW  - Workspace monitoring
KW  - Path planning
Y1  - 2016
SN  - 978-3-319-21289-0 (Print) ; 978-3-319-21290-6 (E-Book)
U6  - http://dx.doi.org/10.1007/978-3-319-21290-6_3
SP  - 27
EP  - 35
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Nakagawa, Masaki
A1  - Kallweit, Stephan
A1  - Michaux, Frank
A1  - Hojo, Teppei
T1  - Typical Velocity Fields and Vortical Structures around a Formula One Car, based on Experimental Investigations using Particle Image Velocimetry
T2  - SAE International Journal of Passenger Cars - Mechanical Systems
Y1  - 2016
U6  - http://dx.doi.org/10.4271/2016-01-1611
SN  - 1946-4002
ER  - 
TY  - CHAP
A1  - Kleine, Harald
A1  - Kallweit, Stephan
A1  - Michaux, Frank
A1  - Havermann, Marc
A1  - Olivier, Herbert
T1  - PIV Measurement of Shock Wave Diffraction
T2  - 18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2016, Lissabon
Y1  - 2016
SP  - 1
EP  - 14
ER  - 
TY  - CHAP
A1  - Schleupen, Josef
A1  - Engemann, Heiko
A1  - Bagheri, Mohsen
A1  - Kallweit, Stephan
T1  - The potential of SMART climbing robot combined with a weatherproof cabin for rotor blade maintenance
T2  - 17th European Conference on Composite Materials – ECCM, Munich, Germany
Y1  - 2016
N1  - ECCM 17
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Ferrein, Alexander
A1  - Gebhardt, Andreas
A1  - Kallweit, Stephan
A1  - Scholl, Ingrid
A1  - Tedjasukmana, Osmond Sanjaya
T1  - Improving additive manufacturing by image processing and robotic milling
T2  - 2015 IEEE International Conference on Automation Science and Engineering (CASE), Aug 24-28, 2015 Gothenburg, Sweden
Y1  - 2015
U6  - http://dx.doi.org/10.1109/CoASE.2015.7294217
SP  - 924
EP  - 929
ER  - 
TY  - CHAP
A1  - Kallweit, Stephan
A1  - Tedjasukmana, O.
A1  - Korculanin, O.
ED  - Kähler, Christian J.
T1  - Adaption und Implementierung eines 3D-PIV Algorithmus auf massiv paralleler Hardware
T2  - Lasermethoden in der Strömungsmesstechnik : 21. Fachtagung, 3. - 5. September 2013, München
Y1  - 2013
SN  - 978-3-9805613-9-6
N1  - Fachtagung Lasermethoden in der Strömungsmesstechnik <13, 2013, München>
PB  - GALA
CY  - Karlsruhe
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Kallweit, Stephan
A1  - Lautermann, Mark
T1  - Towards an autonomous pilot system for a tunnel boring machine
T2  - 5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa
Y1  - 2012
SN  - 978-1-4673-5183-6
N1  - Robotics and Mechatronics Conference of South Africa <5, 2012, Johannesburg> ; ROBOMECH <5, 2012, Johannesburg>
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Hartmann, Axel
A1  - Kallweit, Stephan
A1  - Feldusen, Antje
A1  - Schröder, Wolfgang
T1  - Detection of upstream propagating sound waves at buffet flow using high-speed PIV
BT  - 16th International Symposium on Applications of Laser Techniques to Fluid Mechanics ; 9th to 12th July 2012 Lisbon, Portugal
Y1  - 2012
N1  - Aerodynamisches Institut <Aachen> ; International Symposium on Applications of Laser Techniques to Fluid Mechanics <16, 2012, Lissabon>
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Korculanin, O.
A1  - Fröhlig, F.
A1  - Gabi, M.
A1  - Mattern, P.
T1  - Photogrammetrische Rekonstruktion von Partikelpositionen mittels Rückprojektion für 3D-PIV
JF  - Lasermethoden in der Strömungsmesstechnik : 19. Fachtagung, 6. - 8. September 2011, Ilmenau ; [Tagungsband enthält ... Beiträge, die anlässlich der 19. Fachtagaung "Lasermethoden in der Strömungsmesstechnik" ... vorgetragen und diskutiert wurden] / veranst. von der Deutschen Gesellschaft für Laser-Anemometrie GALA e.V. Hrsg. A. Thess...
Y1  - 2011
SN  - 978-3-9805613-7-2
N1  - Fachtagung Lasermethoden in der Strömungsmesstechnik <19, 2011, Ilmenau> ; Deutsche Gesellschaft für Laser-Anemometrie
SP  - 28/1
EP  - 28/6
PB  - Dt. Ges. für Laser-AnemometrieGALA e. V.
CY  - Karlsruhe
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Kaminsky, Radoslav
A1  - Rossi, Massimiliano
A1  - Morbiducci, Umberto
T1  - PIV Measurements of Flows in Artificial Heart Valves / Kaminsky, Radoslav ; Kallweit, Stephan ; Rossi, Massimiliano ; Morbiducci, Umberto ; Scalise, Lorenzo
JF  - Particle Image Velocimetry - New Developments and Recent Applications
Y1  - 2008
SN  - 978-3-540-73528-1
N1  - Topics in Applied Physics
SP  - 55
EP  - 72
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Kisife, F.
A1  - Utzenrad, M.
A1  - Weber, J.
T1  - Hispeed Scanning Stereo PIV hinter einer künstlichen Herzklappe / Kallweit, S. ; Kisife, F. ; Utzenrad, M. ; Weber, J.
JF  - Lasermethoden in der Strömungsmesstechnik : 16. Fachtagung, 9. - 11. September 2008, Karlsruhe / veranst. von der Deutschen Gesellschaft für Laser-Anemometrie GALA e.V. Hrsg.: B. Ruck
Y1  - 2008
SN  - 978-3-9805613-4-1
N1  - Fachtagung Lasermethoden in der Strömungsmesstechnik ; (16, 2008, Karlsruhe) ; Deutsche Gesellschaft für Laser-Anemometrie
SP  - 29
PB  - GALA e.V.
CY  - Karlsruhe
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Willert, Chris
A1  - Dues, Michael
A1  - Müller, Ulrich
T1  - PIV for Volume Flow Metering / Kallweit, Stephan ; Willert, Chris ; Dues, Michael ; Müller, Ulrich ; Lederer, Thomas
Y1  - 2008
N1  - 14th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2008-07-07 - 2008-07-10, Lisbon (Portugal)
SP  - 6 S.
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Dues, Michael
A1  - Müller, Ulli
A1  - Lederer, Thomas
T1  - Einsatz der Particle Image Velocimetry zur Untersuchung von Rohrströmungen / Kallweit, Stephan ; Dues, Michael ; Müller, Ulli ; Lederer, Thomas ; Schroll, Michael ; Willert, Christian
JF  - Lasermethoden in der Strömungsmesstechnik: 15. Fachtagung 2007 Rostock / Hrsg.: Alfred Leder ....
Y1  - 2007
SN  - 978-3-86009-007-7
N1  - Deutsche Gesellschaft für Laser-Anemometrie ; Fachtagung Lasermethoden in der Strömungsmesstechnik <15, 2007, Rostock>
SP  - 35
ER  -