TY  - CHAP
A1  - Huber, Frédéric
A1  - Bleck, Wolfgang
A1  - Scheik, Sven
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Investigation of galvanneal coating adherence in adhesive bonded joints using lap shear test
T2  - Galvatech 2011 : 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, June 21 - 24, 2011, Genova (Italy) ; proceedings
Y1  - 2011
SN  - 978-88-85298-82-8
SP  - Paper No. 43
PB  - Associazione Italiana di Metallurgia
CY  - Mailand
ER  - 
TY  - JOUR
A1  - Eichler, Fabian
A1  - Balc, Nicolae
A1  - Bremen, Sebastian
A1  - Nink, Philipp
T1  - Investigation of laser powder bed fusion parameters with respect to their influence on the thermal conductivity of 316L samples
JF  - Journal of Manufacturing and Materials Processing
N2  - The thermal conductivity of components manufactured using Laser Powder Bed Fusion (LPBF), also called Selective Laser Melting (SLM), plays an important role in their processing. Not only does a reduced thermal conductivity cause residual stresses during the process, but it also makes subsequent processes such as the welding of LPBF components more difficult. This article uses 316L stainless steel samples to investigate whether and to what extent the thermal conductivity of specimens can be influenced by different LPBF parameters. To this end, samples are set up using different parameters, orientations, and powder conditions and measured by a heat flow meter using stationary analysis. The heat flow meter set-up used in this study achieves good reproducibility and high measurement accuracy, so that comparative measurements between the various LPBF influencing factors to be tested are possible. In summary, the series of measurements show that the residual porosity of the components has the greatest influence on conductivity. The degradation of the powder due to increased recycling also appears to be detectable. The build-up direction shows no detectable effect in the measurement series.
KW  - Additive manufacturing
KW  - LPBF
KW  - SLM
KW  - Thermal conductivity
KW  - 316L
Y1  - 2024
U6  - https://doi.org/10.3390/jmmp8040166
SN  - 2504-4494
N1  - Corresponding author: Fabian Eichler
VL  - 8
IS  - 4
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Feldmann, Martin
A1  - Pak, Daniel
A1  - Geßler, Achim
T1  - Investigation of punctiform, plane and hybrid joints of textile-reinforced concrete parts
JF  - Cement and concrete composites
Y1  - 2008
SN  - 0958-9465
VL  - Vol. 30
IS  - iss. 2
SP  - 82
EP  - 87
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Investigation of the thermodynamics of oxygen and the determination of phase boundaries in the system copper-oxygen-bismuth at 12000C
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 8
SP  - 530
EP  - 534
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Schoene, Jens
A1  - Hegger, Josef
A1  - Gallwoszus, Jörg
A1  - Feldmann, Markus
A1  - Kopp, Maik
A1  - Gündel, Max
ED  - Cairns, John W.
T1  - Investigation on bond mechanisms of innovative small-scale shear connectors between steel and concrete
T2  - Bond in concrete 2012. Vol. 2. Bond in new materials and under severe conditions
Y1  - 2012
SN  - 978-88-907078-3-4
SP  - 893
EP  - 898
PB  - Publisher creations
CY  - Manerbio, Brescia
ER  - 
TY  - CHAP
A1  - Weiss, Christian
A1  - Heslenfeld, Jonas
A1  - Saewe, Jasmin Kathrin
A1  - Bremen, Sebastian
A1  - Häfner, Constantin Leon
T1  - Investigation on the influence of powder humidity in Laser Powder Bed Fusion (LPBF)
T2  - Procedia CIRP 12th CIRP Conference on Photonic Technologies [LANE 2022]
N2  - In the Laser Powder Bed Fusion (LPBF) process, parts are built out of metal powder material by exposure of a laser beam. During handling operations of the powder material, several influencing factors can affect the properties of the powder material and therefore directly influence the processability during manufacturing. Contamination by moisture due to handling operations is one of the most critical aspects of powder quality. In order to investigate the influences of powder humidity on LPBF processing, four materials (AlSi10Mg, Ti6Al4V, 316L and IN718) are chosen for this study. The powder material is artificially humidified, subsequently characterized, manufactured into cubic samples in a miniaturized process chamber and analyzed for their relative density. The results indicate that the processability and reproducibility of parts made of AlSi10Mg and Ti6Al4V are susceptible to humidity, while IN718 and 316L are barely influenced.
KW  - LPBF
KW  - Additive Manufacturing
KW  - Powder Material
KW  - Humidity
Y1  - 2022
U6  - https://doi.org/10.1016/j.procir.2022.08.102
SN  - 2212-8271
N1  - 12th CIRP Conference on Photonic Technologies [LANE 2022], 04. September 2022 bis 08. September 2022, Fürth
VL  - 111
SP  - 115
EP  - 120
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Investigations of the thermodynamics of oxygen and the determination of the miscibility gap in the system copper-oxygen-lead at 12000C
JF  - Zeitschrift für Metallkunde
Y1  - 1984
SN  - 0044-3093
VL  - 75
IS  - 8
SP  - 586
EP  - 589
ER  - 
TY  - JOUR
A1  - Wollert, Jörg
T1  - IO-Link – für smarte Sensoren
JF  - elektroniknet.de
Y1  - 2015
ER  - 
TY  - JOUR
A1  - Wollert, Jörg
A1  - Booke, Andreas
T1  - IoT von der Stange
JF  - elektronik
N2  - Heute sollte am besten jedes Gerät in die große Rechnerwolke eingebettet werden. Doch so einfach ist das nicht, denn Cloud ist viel mehr als nur das Internet der Dinge. Als Anwender muss man sich also fragen, welche Dienste man möchte und welchem Anbieter man sein Vertrauen schenkt.
KW  - Einbetten in das Internet der Dinge
Y1  - 2016
IS  - 21 (2016)
SP  - 30
EP  - 37
PB  - WEKA-Fachmedien
CY  - München
ER  - 
TY  - BOOK
A1  - Hanrath, Wilhelm
T1  - Irreduzible Darstellungen von Raumgruppen
Y1  - 1988
N1  - Aachen, Techn. Hochsch., Diss., 1988
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Wollert, Jörg
T1  - IT ins Auto! IP im Ethernet und der USB können im Kfz gut genutzt werden
JF  - Elektronik automotive : Magazin für Entwicklungen in der Kfz-Elektronik und Telematik
Y1  - 2008
SN  - 1614-0125
IS  - H. 9
SP  - 46
EP  - 51
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Jewelry fabrication via selective laser melting of glass
T2  - ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications
N2  - Selective Laser Melting (SLM) is one of the Additive Manufacturing (AM) technologies applicable for producing complex geometries which are typically expensive or difficult to fabricate using conventional methods. This process has been extensively investigated experimentally for various metals and the fabrication process parameters have been established for different applications; however, fabricating 3D glass objects using SLM technology has remained a challenge so far although it could have many applications. This paper presents a summery on various experimental evaluations of a material database incorporating the build parameters of glass powder using the SLM process for jewelry applications.
Y1  - 2014
SN  - 978-0-7918-4583-7
U6  - https://doi.org/10.1115/ESDA2014-20380
SP  - V001T06A005
ER  - 
TY  - BOOK
A1  - Gauchel, Joachim
A1  - Pfeiffer, Johann
T1  - Kalibrierung Koordinatenmessgerät
Y1  - 2003
N1  - Abschlußbericht Forschungsvorhaben FH Aachen
CY  - FH Aachen
ER  - 
TY  - BOOK
A1  - Pfeiffer, Johann
A1  - Gauchel, Joachim
T1  - Kalibrierung Koordinatenmessgerät
Y1  - 2004
N1  - Abschlussbericht K2-Forschungsvorhaben der Fachhochschule Aachen, Fachbereich Maschinenbau und Mechatronik, Lehrgebiet Integrierte Qualitätssicherung und Automatisierungstechnik
PB  - Fachhochsch.
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Klocke, Martina
A1  - Spur, G.
T1  - Keramografische Untersuchungen an Edelkorundschleifscheiben / Spur, G. ; Klocke, M.
JF  - Jahrbuch Schleifen, Honen, Läppen und Polieren. 53. Ausgab (1985)
Y1  - 1985
SN  - 0172-245X
SP  - 255
EP  - 267
ER  - 
TY  - JOUR
A1  - Klocke, Martina
T1  - Kiel – eine Fachhochschule macht Stadtteilarbeit
Y1  - 2000
N1  - http://www.zukunft-der-regionen.de (aufgerufen am 17.07.2006)
CY  - Kiel
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Feldmann, Martin
A1  - Pak, Daniel
A1  - Geßler, Achim
T1  - Kleben dünnwandiger Bauteile aus textilbewehrtem Beton
JF  - Schweissen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren
Y1  - 2008
SN  - 0036-7184
VL  - Bd. 60
IS  - H. 7/8
SP  - 408
EP  - 412
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Stieglitz, Anja
T1  - Kleben im Schienenfahrzeugbau
T2  - Die Verbindungs-Spezialisten 2009 : Große Schweißtechnische Tagung ; Forschungsforum, Industrieforum, Studentenkongress, Handwerkerforum ; Vorträge der Veranstaltung in Essen vom 14. bis 19. September 2009. DVS-Berichte. 258
Y1  - 2009
SN  - 978-3-87155-584-8
SP  - 182
EP  - 186
PB  - DVS-Media
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Stieglitz, Anja
T1  - Kleben in anspruchsvollen Anwendungsbereichen
T2  - Jahrbuch Schweißtechnik 2011
Y1  - 2010
SN  - 0935-0292
SP  - 226
EP  - 235
PB  - DVS
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Geßler, Achim
A1  - Rettweiler, Timo
A1  - Völling, Boris
T1  - Kleben textilbewehrter Betonbauteile
JF  - Schweissen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren. Jg. 57 (2005), Nr. 8
Y1  - 2005
SN  - 0036-7184
SP  - 373
EP  - 377
ER  -