TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Hagemann, B.
A1  - Lehr, H.
A1  - Michel, F.
T1  - LIGA Example 2: Electromagnetic Micromotor. Hagemann, B.; Kämper, K.-P.; Lehr, H.; Michel, F.; Thürigen, C.
JF  - LIGA technique / Hans-Dieter Bauer (ed.). [Developed by UETP-MEMS, University Training Partnership for Micro-Electro-Mechanical Systems ...]. - 2.ed.
Y1  - 1995
N1  - University Enterprise Training Partnership for Micro-Electro-Mechanical Systems
SP  - 100
EP  - 110
PB  - FSRM
CY  - Neuchatel
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Lehr, H.
A1  - Ehrfeld, W.
A1  - Michel, F.
T1  - LIGA Components for the Construction of Milliactuators. Lehr, H.; Ehrfeld, W.; Kämper, K.-P.; Michel, F.; Schmidt, M.
JF  - 1994 IEEE Symposium on Emerging Technologies & Factory Automation : novel disciplines for the next century ; proceedings, November 6 - 10, 1994, Tokyo, Japan / ETFA '94. Hiroyuki Fujita [chairman] ... Sponsored by: Institute of Industrial Science, SEIKEN
Y1  - 1994
SN  - 0780321146
SP  - 43
EP  - 47
CY  - Piscataway, N.J.
ER  - 
TY  - CHAP
A1  - Wiesen, Patrick
A1  - Engemann, Heiko
A1  - Limpert, Nicolas
A1  - Kallweit, Stephan
T1  - Learning by Doing - Mobile Robotics in the FH Aachen ROS Summer School
T2  - European Robotics Forum 2018, TRROS18 Workshop
Y1  - 2018
SP  - 47
EP  - 58
ER  - 
TY  - JOUR
A1  - Starke, Günther
A1  - Drews, P.
T1  - Le soudage au siecle de l'informatique
JF  - Souder. 18 (1994), H. 6
Y1  - 1994
SN  - 0246-1900
SP  - 33
EP  - 44
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
T1  - Laserwelding with fillerwire
JF  - LIA handbook of laser material processing / Laser Institute of America
Y1  - 2001
SN  - 3-540-41770-2
N1  - Chapter 11.2.12
CY  - Orlando, Florida
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Olschok, Simon
A1  - Jakobs, Stefan
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Rossiter, Eduardo
T1  - Laser beam submerged arc hybrid welding
JF  - Physics procedia
N2  - The laser beam-submerged arc hybrid welding method originates from the knowledge that, with increasing penetration depth, the laser beam process has a tendency to pore formation in the lower weld regions. The coupling with the energy-efficient submerged-arc process improves degassing and reduces the tendency to pore formation. The high deposition rate of the SA process in combination with the laser beam process offers, providing the appropriate choice of weld preparation, the possibility of welding plates with a thickness larger than 20° mm in a single pass, and also of welding thicker plates with the double-sided single pass technique.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.phpro.2012.10.016
SN  - 1875-3892
N1  - Part of special issue "Laser assisted net shape engineering 7 (LANE 2012)"
VL  - 39
SP  - 75
EP  - 83
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Roesner, Andreas
A1  - Scheik, Sven
A1  - Olowinsky, Alexander
A1  - Gillner, Arnold
A1  - Reisgen, Uwe
A1  - Schleser, Markus
T1  - Laser assisted joining of plastic metal hybrids
JF  - Lasers in manufacturing 2011 : proceedings of the sixth International WLT Conference on Lasers in Manufacturing, Munich, May 23 - 26 2011. (Physics procedia ; Vol. 12 (2011), Part B)
Y1  - 2011
SN  - 1875-3892 (E-Journal); 1875-3884 (Print)
SP  - 370
EP  - 377
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Jewelry fabrication via selective laser melting of glass
T2  - ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications
N2  - Selective Laser Melting (SLM) is one of the Additive Manufacturing (AM) technologies applicable for producing complex geometries which are typically expensive or difficult to fabricate using conventional methods. This process has been extensively investigated experimentally for various metals and the fabrication process parameters have been established for different applications; however, fabricating 3D glass objects using SLM technology has remained a challenge so far although it could have many applications. This paper presents a summery on various experimental evaluations of a material database incorporating the build parameters of glass powder using the SLM process for jewelry applications.
Y1  - 2014
SN  - 978-0-7918-4583-7
U6  - http://dx.doi.org/10.1115/ESDA2014-20380
SP  - V001T06A005
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Investigations of the thermodynamics of oxygen and the determination of the miscibility gap in the system copper-oxygen-lead at 12000C
JF  - Zeitschrift für Metallkunde
Y1  - 1984
SN  - 0044-3093
VL  - 75
IS  - 8
SP  - 586
EP  - 589
ER  - 
TY  - CHAP
A1  - Weiss, Christian
A1  - Heslenfeld, Jonas
A1  - Saewe, Jasmin Kathrin
A1  - Bremen, Sebastian
A1  - Häfner, Constantin Leon
T1  - Investigation on the influence of powder humidity in Laser Powder Bed Fusion (LPBF)
T2  - Procedia CIRP
N2  - In the Laser Powder Bed Fusion (LPBF) process, parts are built out of metal powder material by exposure of a laser beam. During handling operations of the powder material, several influencing factors can affect the properties of the powder material and therefore directly influence the processability during manufacturing. Contamination by moisture due to handling operations is one of the most critical aspects of powder quality. In order to investigate the influences of powder humidity on LPBF processing, four materials (AlSi10Mg, Ti6Al4V, 316L and IN718) are chosen for this study. The powder material is artificially humidified, subsequently characterized, manufactured into cubic samples in a miniaturized process chamber and analyzed for their relative density. The results indicate that the processability and reproducibility of parts made of AlSi10Mg and Ti6Al4V are susceptible to humidity, while IN718 and 316L are barely influenced.
KW  - LPBF
KW  - Additive Manufacturing
KW  - Powder Material
KW  - Humidity
Y1  - 2022
U6  - http://dx.doi.org/10.1016/j.procir.2022.08.102
SN  - 2212-8271
N1  - Teil der Sonderausgabe: 12th CIRP Conference on Photonic Technologies [LANE 2022]
VL  - 111
SP  - 115
EP  - 120
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Schoene, Jens
A1  - Hegger, Josef
A1  - Gallwoszus, Jörg
A1  - Feldmann, Markus
A1  - Kopp, Maik
A1  - Gündel, Max
ED  - Cairns, John W.
T1  - Investigation on bond mechanisms of innovative small-scale shear connectors between steel and concrete
T2  - Bond in concrete 2012. Vol. 2. Bond in new materials and under severe conditions
Y1  - 2012
SN  - 978-88-907078-3-4
SP  - 893
EP  - 898
PB  - Publisher creations
CY  - Manerbio, Brescia
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Investigation of the thermodynamics of oxygen and the determination of phase boundaries in the system copper-oxygen-bismuth at 12000C
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 8
SP  - 530
EP  - 534
ER  - 
TY  - JOUR
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Feldmann, Martin
A1  - Pak, Daniel
A1  - Geßler, Achim
T1  - Investigation of punctiform, plane and hybrid joints of textile-reinforced concrete parts
JF  - Cement and concrete composites
Y1  - 2008
SN  - 0958-9465
VL  - Vol. 30
IS  - iss. 2
SP  - 82
EP  - 87
ER  - 
TY  - CHAP
A1  - Huber, Frédéric
A1  - Bleck, Wolfgang
A1  - Scheik, Sven
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Investigation of galvanneal coating adherence in adhesive bonded joints using lap shear test
T2  - Galvatech 2011 : 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, June 21 - 24, 2011, Genova (Italy) ; proceedings
Y1  - 2011
SN  - 978-88-85298-82-8
SP  - Paper No. 43
PB  - Associazione Italiana di Metallurgia
CY  - Mailand
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Turichin, Gleb
A1  - Valdaitseva, Elena
A1  - Bach, Friedrich-Wilhelm
A1  - Hassel, Thomas
A1  - Beniyashi, Alexander
T1  - Investigation of factors for defect-free weld formation by non-vacuum electron beam welding
T2  - Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine
Y1  - 2011
SP  - 104
EP  - 109
PB  - Paton Publ. House
CY  - Kiev
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Introduction to Additive Manufacturing
T2  - 3D Printing of Optical Components
N2  - Additive manufacturing (AM) works by creating objects layer by layer in a manner similar to a 2D printer with the “printed” layers stacked on top of each other. The layer-wise manufacturing nature of AM enables fabrication of freeform geometries which cannot be fabricated using conventional manufacturing methods as a one part. Depending on how each layer is created and bonded to the adjacent layers, different AM methods have been developed. In this chapter, the basic terms, common materials, and different methods of AM are described, and their potential applications are discussed.
KW  - Additive manufacturing
KW  - 3D printing
KW  - Digital manufacturing
KW  - Rapid prototyping
KW  - Rapid manufacturing
Y1  - 2020
SN  - 978-3-030-58960-8
U6  - http://dx.doi.org/10.1007/978-3-030-58960-8_1
SP  - 1
EP  - 22
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Schürmann, Volker
A1  - Keller, Alex
A1  - Wollert, Jörg
T1  - Internet based middleware approach for building services
T2  - Proceedings / IMETI 2009, the 2nd International Multi-Conference on Engineering and Technological Innovation : July 10 - 13, 2009 Orlando, Florida, USA ; vol. 1
Y1  - 2009
SN  - 1-934272-68-X ; 978-1-934272-68-8
SP  - 30
EP  - 34
PB  - IIIS
CY  - Winter Garden, Fla.
ER  - 
TY  - CHAP
A1  - Schürmann, Volker
A1  - Mann, Thorsten
A1  - Buda, Aurel
A1  - Wollert, Jörg
T1  - Integrating bluetooth localization into existing TCP/IP networks
T2  - IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, 2009 : IDAACS 2009 ; Rende, Cosenza, Italy, 21 - 23 Sept. 2009
Y1  - 2009
SN  - 978-1-4244-4882-1 ; ISBN: 978-1-4244-4901-9
U6  - http://dx.doi.org/10.1109/IDAACS.2009.5342903
SP  - 621
EP  - 624
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Kolkmann, Annette
A1  - Gries, Thomas
A1  - Schleser, Markus
A1  - Dilthey, Ulrich
T1  - Innovative yarn structures and coatings for textile reinforced concrete
T2  - All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main
Y1  - 2005
CY  - Frankfurt a.M.
ER  - 
TY  - CHAP
A1  - Gerhards, Benjamin
A1  - Schleser, Markus
A1  - Otten,, Christian
A1  - Schwarz, Alexander
A1  - Gebhardt, Andreas
T1  - Innovative Laser Beam Joining Technology for Additive Manufactured Parts
T2  - Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava
Y1  - 2019
SP  - 1
EP  - 8
ER  -