TY - JOUR A1 - Reisgen, Uwe A1 - Schleser, Markus A1 - Abdurakhmanov, Aydemir A1 - Gumenyuk, Andrey T1 - Measuring of plasma properties induced by non-vacuum electron beam welding JF - Physics of plasma N2 - Electron beam plasma measurement was realised by means of DIABEAM system invented by ISF RWTH Aachen. The Langmuir probe method is used for measurement. The relative simplicity of the method and the possibility of dispersion of high power on the probe allow its application for the investigation of high-power electron beams. The key element of the method is a rotating thin tungsten wire, which intersects the beam transversely on its axis and collects part of the current by itself. The signals, which are registered in the DIABEAM as a voltage, were taken in the form of amplitude. The conversion of the probe current into the distribution along the beam radius was realised using the Abel’s method. A voltage-current characteristic was built for the beam current. The local electron density as well as the electron temperature, the floating potential and the plasma potential were measured and calculated by means of this characteristic. Y1 - 2012 U6 - http://dx.doi.org/10.1063/1.3675874 SN - 1089-7674 (E-Journal); 1070-664X (Print) VL - 19 IS - 1 SP - 1 EP - 7 PB - AIP Publishing CY - Melville, NY ER - TY - JOUR A1 - Enning, Manfred A1 - Jenayeh, I. A1 - Müller, C. A1 - Kositza, N. T1 - Mechatronics in automating shunting processes in marshalling yards / Jenayeh, I. ; Müller, C.; Kositza, N. ; Enning, M. ; Rake, H. JF - Mechatronics '98 : proceedings of the 6th UK Mechatronics Forum International Conference, Skövde, Sweden, 9-11 September 1998 Y1 - 1998 SN - 0-08-043339-1 N1 - UK Mechatronics Forum International Conference (6 : 1998 : Skövde) PB - Pergamon CY - Amsterdam ER - TY - JOUR A1 - Starke, Günther T1 - Mechatronik und Robotik in der Fertigung - Entwicklung eines integrierten Fertigungskonzepts zur automatisierten Regenerierung von Umformwerkzeugen JF - Advanced driving systems : Tagungsband / ISOM Chemnitz 2002, Chemnitz, Germany, March 21 - 22, 2002. Ed. by Peter Maisser Y1 - 2002 SN - 3-00-007504-6 SP - 193 EP - 203 PB - Inst. für Mechatronik CY - Chemnitz ER - TY - JOUR A1 - Enning, Manfred A1 - Pischinger, S. A1 - Rake, H. A1 - Krüger, M. T1 - Mehrgrößenregelung beim direkt einspritzenden Pkw-Dieselmotor / Pischinger, S. ; Rake, H. ; Krüger, M. ; Enning, M. ; Fieweger, K. ; Kinoo, B. ; Schloßer, A. JF - Dieselmotorentechnik 2000 : aktueller Stand und Entwicklungstendenzen ; mit 17 Tabellen und 106 Literaturstellen / Michael Bargende. Ulf Essers (Hrsg.) Y1 - 2000 SN - 3-8169-1829-8 N1 - Kontakt & Studium ; 580 SP - 198 EP - 217 PB - Expert-Verl. CY - Renningen-Malmsheim ER - TY - JOUR A1 - Reisgen, Uwe A1 - Schleser, Markus A1 - Jerabek, Jakub A1 - Chudoba, Rostislav T1 - Messung der Strahlqualität einer Elektronenstrahlanlage in Umgebungsatmosphäre JF - Materialwissenschaft und Werkstofftechnik N2 - In den letzten Jahrzehnten hat das Elektronenstrahlschweißen, das bereits im größeren Maßstab verwendet wird, seine Fähigkeit als qualitatives Werkzeug für die Verbindung verschiedener Materialen nachgewiesen. Das Non Vacuum Electron Beam Welding (NV-EBW) hat zahlreiche Vorteile im Vergleich zum Elektronenstrahlschweißen im Vakuum, da man unter normalem Atmosphärendruck arbeiten kann. Im Hinblick auf die reproduzierbare Qualität, insbesondere im Bereich der Massen-Fertigung, ist die Kontrolle der Strahlparameter sowie deren Einfluss auf das Schweißergebnis von großer Bedeutung. Durch eine genaue Kenntnis der Strahlkenngrößen wie des Strahldurchmessers und der Leistungsdichteverteilung kann eine Aussage über die sich ausbildende Schweißnaht sowie die Schweißbaddynamik getroffen werden. Messungen der Strahlkenngrößen im Prozess erlauben insbesondere die Untersuchung von Humping-Effekten. In diesem Beitrag wird der Prozess der Elektronenstrahlvermessung unter atmosphärischen Bedingungen beschrieben. Es wird zudem die Abhängigkeit der Elektronenstrahlcharakteristika von den verschiedenen Prozessparametern dargestellt. Y1 - 2010 SN - 1521-4052 VL - 41 IS - 1 SP - 45 EP - 52 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Baatz, Udo A1 - Wiendahl, Hans Peter T1 - Methoden des Konstruierens - Übersicht über Geräte, Methoden und Hilfsmittel zur Beseitigung des Engpasses Konstruktion, Teil 1 JF - Grundlagen der Landtechnik N2 - Der Konstruktionsbereich ist zu einem neuen Schwerpunkt der allgemeinen Rationalisierungsbemühungen geworden. Zunehmend führt man organisatorische Hilfsmittel, technische Hilfsmittel (EDVA) und neue Konstruktionsmethoden in der Konstruktion ein. Der vorliegende Beitrag analysiert zunächst die Ursachen dieser Entwicklung und zeigt im weiteren einige heute bereits eingesetzte Hilfsmittel an Hand von Beispielen auf und diskutiert die Anwendungsmöglichkeiten. Y1 - 1971 SN - 0017-4920 VL - 21 IS - 2 SP - 35 EP - 38 PB - VDI-Verlag CY - Düsseldorf ER - TY - JOUR A1 - Baatz, Udo A1 - Wiendahl, Hans Peter T1 - Methoden des Konstruierens - Übersicht über Geräte, Methoden und Hilfsmittel zur Beseitigung des Engpasses Konstruktion, Teil 2 JF - Grundlagen der Landtechnik N2 - Der Konstruktionsbereich ist zu einem neuen Schwerpunkt der allgemeinen Rationalisierungsbemühungen geworden. Zunehmend führt man organisatorische Hilfsmittel, technische Hilfsmittel (EDVA) und neue Konstruktionsmethoden in der Konstruktion ein. Der vorliegende Beitrag analysiert zunächst die Ursachen dieser Entwicklung und zeigt im weiteren einige heute bereits eingesetzte Hilfsmittel an Hand von Beispielen auf und diskutiert die Anwendungsmöglichkeiten. Y1 - 1971 SN - 0017-4920 VL - 212 IS - 3 SP - 77 EP - 80 PB - VDI-Verlag CY - Düsseldorf ER - TY - BOOK A1 - Engeln-Müllges, Gisela A1 - Zimmermann, Hans-Jürgen T1 - Methoden und Modelle des Operations Research : für Ingenieure, Ökonomen und Informatiker / Hans-Jürgen Zimmermann. [Hrsg. von Gisela Engeln-Müllges] - 2., überarb. Aufl. Y1 - 1992 SN - 3-528-18917-7 PB - Vieweg CY - Braunschweig ; Wiesbaden ER - TY - CHAP A1 - Dannen, Tammo A1 - Schindele, Benedikt A1 - Prümmer, Marcel A1 - Arntz, Kristian A1 - Bergs, Thomas T1 - Methodology for the self-optimizing determination of additive manufacturing process eligibility and optimization potentials in toolmaking T2 - Procedia CIRP N2 - Additive Manufacturing (AM) of metallic workpieces faces a continuously rising technological relevance and market size. Producing complex or highly strained unique workpieces is a significant field of application, making AM highly relevant for tool components. Its successful economic application requires systematic workpiece based decisions and optimizations. Considering geometric and technological requirements as well as the necessary post-processing makes deciding effortful and requires in-depth knowledge. As design is usually adjusted to established manufacturing, associated technological and strategic potentials are often neglected. To embed AM in a future proof industrial environment, software-based self-learning tools are necessary. Integrated into production planning, they enable companies to unlock the potentials of AM efficiently. This paper presents an appropriate methodology for the analysis of process-specific AM-eligibility and optimization potential, added up by concrete optimization proposals. For an integrated workpiece characterization, proven methods are enlarged by tooling-specific figures. The first stage of the approach specifies the model’s initialization. A learning set of tooling components is described using the developed key figure system. Based on this, a set of applicable rules for workpiece-specific result determination is generated through clustering and expert evaluation. Within the following application stage, strategic orientation is quantified and workpieces of interest are described using the developed key figures. Subsequently, the retrieved information is used for automatically generating specific recommendations relying on the generated ruleset of stage one. Finally, actual experiences regarding the recommendations are gathered within stage three. Statistic learning transfers those to the generated ruleset leading to a continuously deepening knowledge base. This process enables a steady improvement in output quality. KW - Additive manufacturing KW - Laser-Powder Bed Fusion KW - L-PBF KW - Binder Jetting KW - Directed Energy Deposition Y1 - 2022 U6 - http://dx.doi.org/10.1016/j.procir.2022.05.188 SN - 2212-8271 N1 - 55th CIRP Conference on Manufacturing Systems VL - 107 SP - 1539 EP - 1544 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Kämper, Klaus-Peter A1 - Döpper, J. A1 - Clemens, M. A1 - Ehrfeld, W. T1 - Micro gear pumps for dosing of viscous fluids. / Döpper, J. (u.a.) JF - Journal of Micromechanics and Microengineering. 7 (1997), H. 3 Y1 - 1997 SN - 0960-1317 SP - 230 EP - 232 ER - TY - JOUR A1 - Kämper, Klaus-Peter A1 - Lehr, H. A1 - Abel, S. A1 - Döpper, J. T1 - Microactuators as driving units for microrobotic systems. Herstellung von Mikroaktoren mit dem LIGA-Verfahren für Mikroroboter / Lehr, H.; Abel, S.; Döpper, J.; Ehrfeld, W.; Hagemann, B.; Kämper, K.-P.; Michel, F.; Schulu, c.; Thürigen, C. JF - Proceedings of the SPIE - The International Society for Optical Engineering Y1 - 1996 SN - 0277-786X N1 - Konferenz-Einzelbericht. SP - 202 EP - 210 ER - TY - JOUR A1 - Kämper, Klaus-Peter A1 - Ehrfeld, W. A1 - Döpper, J. A1 - Hessel, V. T1 - Microfluidic components for biological and chemical microreactors. Kämper, K.-P.; Ehrfeld, W.; Döpper, J.; Hessel, V.; Lehr, H.; Löwe, H.; Richter, T.; Wolf, A. JF - Proceedings : an investigation of micro structures, sensors, actuators, machines and robots ; Nagoya, Japan, January 26 - 30, 1997 / IEEE Robotics and Automation Society ... Y1 - 1997 SN - 0-7803-3744-1 N1 - International Workshop on Micro-Electro-Mechanical Systems <10, 1997, Nagoya> SP - 338 EP - 343 PB - IEEE Service Center CY - Piscataway, NJ ER - TY - CHAP A1 - Braun, Sebastian A1 - Cheng, Chi-Tsun A1 - Lai, Chow Yin A1 - Wollert, Jörg T1 - Microservice Architecture for Automation - Realization by the example of a model-factory’s manufacturing execution system T2 - Proceedings of the 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019 Y1 - 2019 SP - 33 EP - 37 ER - TY - JOUR A1 - Ramazani, Ali A1 - Li, Yang A1 - Mukherjee, Krishnendu A1 - Prahl, Ulrich A1 - Bleck, Wolfgang A1 - Abdurakhmanov, Aydemir A1 - Schleser, Markus A1 - Reisgen, Uwe T1 - Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding JF - Computational materials science Y1 - 2013 SN - 1879-0801 (E-Book); 0927-0256 (Print) VL - Vol. 68 SP - 107 EP - 116 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Kämper, Klaus-Peter A1 - Abraham, M. A1 - Ehrfeld, W. A1 - Hessel, V. T1 - Microsystem technology: Between research and industrial application. Abraham, M.; Ehrfeld, W.; Hessel, V.; Kämper, K.-P.; Lacher, M.; Picard, A. JF - Microelectronic Engineering. 41-42 (1998) Y1 - 1998 SN - 0167-9317 N1 - International Conference on Micro- and Nanofarbication SP - 47 EP - 52 ER - TY - CHAP A1 - Dilthey, Ulrich A1 - Brandenburg, Annette A1 - Schleser, Markus T1 - Mikrokleben T2 - Montage hybrider Mikrosysteme : Handhabungs- und Fügetechniken für die Klein- und Mittelserienfertigung Y1 - 2005 SN - 978-3-540-23706-8 SP - 161 EP - 172 PB - Springer CY - Berlin [u.a.] ER - TY - JOUR A1 - Kämper, Klaus-Peter T1 - Mikromontage zur Fertigung hybrider Mikrosysteme. Nienhaus, M.; Berg, U.; Ehrfeld, W.; Kämper, K.-P.; Lehr, H.; Michel, F. JF - 41. Internationales Wissenschaftliches Kolloquium, Wandel im Maschinenbau durch Feinwerktechik und Mikrosystemtechnik, Bd. 1, Ilmenau, DE, 23.-26. Sep, 1996 Y1 - 1996 N1 - Internationales Wissenschaftliches Kolloquium der TU Ilmenau, 41 SP - 121 EP - 126 ER - TY - JOUR A1 - Kämper, Klaus-Peter A1 - Lacher, M. A1 - Abraham, M. A1 - Ehrfeld, W. T1 - Mikrosysteme für die Luft- und Raumfahrt. Lacher, M.; Abraham, M.; Ehrfeld, W.; Hagemann, B.; Kämper, K.-P.; Lehr, H.; Picard, A.; Zetterer, T. JF - Deutscher Luft- und Raumfahrtkongreß 1995/1 (1995). Bonn, 26. - 29. September 1995 Motto: "Luft- und Raumfahrt - Schlüsseltechnologien für das 21. Jahrhundert" Y1 - 1995 N1 - DGLR-Jahrestagung ; 1995 SP - 415 EP - 423 PB - Deutsche Gesellschaft für Luft- und Raumfahrt CY - Lilienthal-Oberth ER - TY - JOUR A1 - Heinrichs, Horst T1 - Mit Grafik schafft FEM den Durchbruch JF - Maschinen, Anlagen, Verfahren (1993) Y1 - 1993 SN - 0343-043X SP - 58 EP - 59 ER - TY - JOUR A1 - Wollert, Jörg T1 - Mit verwertbarem Aufwand : Portieren von Software auf Windows CE JF - Elektrotechnik für die Automatisierung Y1 - 1999 SN - 0013-581X SP - 46 EP - 47 ER - TY - CHAP A1 - Buda, Aurel A1 - Jozenfini, B. A1 - Wollert, Jörg T1 - Mobile ad-hoc Network for home automation based on ZigBee application framework T2 - 1st European ZigBee Developer's Conference : June 18 - 20, 2007, Munich, Germany Y1 - 2007 SP - 1 EP - 5 PB - Design & Elektronik CY - Poing ER - TY - CHAP A1 - Kallweit, Stephan A1 - Ferrein, Alexander A1 - Scholl, Ingrid A1 - Reichert, Walter T1 - Mobile Autonome Systeme in der Lehre, am Beispiel der ROS Summer School T2 - Tagungsband AALE 2014 : das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ; 11. Fachkonferenz, Regensburg ; [11. Konferenz für Angewandte Automatisierungstechnik in Lehre und Entwicklung / Ostbayerische Technische Hochschule Regensburg; VFAALE, Verein der Freunde und Förderer der Angewandten Automatisierungstechnik] Y1 - 2014 SN - 978-3-8356-7142-3 N1 - Die Textverteilung der elektronischen Zweitveröffentlichung entspricht nicht der der o.g. Verlagsausgabe. SP - 157 EP - 163 PB - Dt. Industrieverl. CY - München ER - TY - CHAP A1 - Wollert, Jörg T1 - Mobility - Integration von Offboard-Devices in Fahrzeugen T2 - Begleittexte zum Entwicklerforum Kfz-Elektronik & FlexRay Solution Day : 15. Mai 2007, Ludwigsburg / hrsg. von Caspar Grote ... Y1 - 2007 SP - 47 EP - 54 PB - Design & Elektronik CY - Poing ER - TY - CHAP A1 - Pfaff, Raphael A1 - Pichler, Alexander A1 - George, Alfred A1 - Seiler, Friedrich T1 - Model based image processing for flow visualisation : 16th International Conference on Systems Science, Wroclaw, Poland, September 04 - 06, 2007 T2 - PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620 Y1 - 2007 SP - 1 EP - 10 PB - ISL CY - Saint Louis, France ER - TY - CHAP A1 - Gao, H. A1 - Babilon, Katharina A1 - Pfaff, Raphael A1 - Gan, F. A1 - Reich, A. T1 - Model of wheel-rail contact for sanding and adhesion enhancement T2 - Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018 Y1 - 2018 SN - 978-946186963-0 SP - 314 EP - 321 ER - TY - JOUR A1 - Enning, Manfred A1 - Kositza, N. A1 - Rake, H. T1 - Modellbildung und Analyse von Schwingungsphänomenen an Kettenkratzförderern / Kositza, N. ; Enning, M. ; Rake, H. JF - Automatisierungstechnik im Spannungsfeld neuer Technologien : Tagung Baden-Baden, 22. und 23. Mai 2001 / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik Y1 - 2001 SN - 3-18-091608-7 N1 - GMA-Kongress ; 2001 SP - 577 EP - 584 PB - VDI-Verl. CY - Düsseldorf ER - TY - JOUR A1 - Enning, Manfred A1 - Gall, Jan A1 - Abel, Dirk T1 - Modellfabrik im Zeichen der Automatisierungstechnik / Gall, Jan ; Enning, Manfred ; Abel, Dirk JF - Automation 2008 - Lösungen für die Zukunft : der Automatisierungskongress in Deutschland, Tagung Baden-Baden, 3. und 4. Juni 2008 / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik Y1 - 2008 SN - 978-3-18-092032-0 N1 - VDI-Berichte ; 2032 SP - 281 EP - 284 PB - VDI-Verl. CY - Düsseldorf ER - TY - JOUR A1 - Enning, Manfred A1 - Abel, D. A1 - Bollig, A. T1 - Modellfabrik macht Automatisierungstechnik erlebbar / Abel, D. ; Bollig, A. ; Enning, M. JF - RWTH-Themen (2006) Y1 - 2006 SN - 0179-079X SP - 12 EP - 14 ER - TY - JOUR A1 - Enning, Manfred A1 - Bollig, A. A1 - Mann, S. A1 - Kaierle, S. T1 - Modellgestützte Prädiktive Regelung beim Laserstrahlschweißen / Bollig, A. ; Mann, S. ; Enning, M. ; Kaierle, S. JF - Automatisierungstechnische Praxis : atp. 43 (2001), H. 7 Y1 - 2001 SN - 0178-2320 SP - 35 EP - 39 ER - TY - CHAP A1 - Moshiri-Kahak, Amir A1 - Pfaff, Raphael A1 - Gäbel, Markus A1 - Reich, Alexander T1 - Modellierung der Adhäsionsfläche im Rad-Schiene-Kontakt unter Einsatz von reibwertverbessernden Mitteln T2 - 15. Internationale Schienenfahrzeugtagung Rad Schiene 2017, Dresden, März 2017 Y1 - 2017 N1 - Internationale Schienenfahrzeugtagung <15., 2017, Dresden> ER - TY - CHAP A1 - Wollert, Jörg T1 - Modellierung intelligenter Regelungen mit analytischen und heuristischen Merkmalen T2 - 39. Internationales Wissenschaftliches Kolloquium / Technische Universität Ilmenau, Thüringen : 27.-30.09.1994 Y1 - 1994 SN - 0943-7207 SP - 181 EP - 188 PB - Techn. Univ. CY - Ilmenau ER - TY - JOUR A1 - Reisgen, Uwe A1 - Schleser, Markus A1 - Mokrov, Oleg A1 - Zabirov, Alexander A1 - Füssel, Uwe A1 - Schnick, Michael A1 - Hertel, Martin A1 - Jaeckel, Sebastian T1 - Modellierung und Visualisierung der MSG-Lichtbogenprozesse JF - Schweissen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren Y1 - 2012 SN - 0036-7184 VL - 64 IS - 4 SP - 166 EP - 174 PB - DVS Verlag CY - Düsseldorf ER - TY - JOUR A1 - Reisgen, Uwe A1 - Schleser, Markus A1 - Mokrov, Oleg A1 - Zabirov, Alexander A1 - Füssel, Uwe A1 - Schnick, Michael A1 - Hertel, Martin A1 - Jaeckel, Sebastian T1 - Modelling and visualisation of the GMA process JF - Welding and Cutting Y1 - 2012 SN - 1612-3433 VL - 11 IS - 4 SP - 242 EP - 249 PB - DVS Verlag CY - Düsseldorf ER - TY - THES A1 - Pfaff, Raphael T1 - Modelling of nonlinear systems using piecewise defined models Y1 - 2006 N1 - Coventry, Univ., Masterarbeit, 2006 ER - TY - CHAP A1 - Pfaff, Raphael A1 - Moshiri, Amir A1 - Reich, Alexander A1 - Gäbel, Markus T1 - Modelling of the effect of sanding on the wheel-rail adhesion area T2 - First International Conference on Rail Transportation Y1 - 2017 N1 - 2017 ICRT; International Conference on Rail Transportation <1, 2017, Chengdu, China> SP - 1 EP - 7 ER - TY - CHAP A1 - Pfaff, Raphael A1 - Vinsonneau, B. A1 - Burnham, K. J. T1 - Multiple models for nonlinear systems T2 - Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK] Y1 - 2006 SN - 1-84600-013-0 SP - 347 EP - 352 ER - TY - JOUR A1 - Kallweit, Stephan A1 - Dues, Michael A1 - Radke, Michael T1 - Möglichkeiten und Grenzen laseroptischer Verfahren zur Untersuchung hydraulischer Strömungsmaschinen / Dues, Michael ; Kallweit, Stephan ; Radke, Michael JF - Forschung im Ingenieurwesen. 60 (1994), H. 11-12 Y1 - 1994 SN - 0015-7899 SP - 332 EP - 336 ER - TY - JOUR A1 - Starke, Günther T1 - Nahtfuehrungssensor zur adaptiven Steuerung von Handhabungseinrichtungen fuer das Lichtbogenschweissen JF - Schweissen und Schneiden. 39 (1987), H. 4 Y1 - 1987 SN - 0036-7184 SP - 191 EP - 192 ER - TY - JOUR A1 - Baatz, Udo T1 - Neue Aspekte der Integrierten Qualitätssicherung für Automobil - Zulieferer JF - Jahrbuch für Ingenieure Y1 - 1979 PB - Expert-Verl. CY - Grafenau, Zürich ER - TY - JOUR A1 - Gebhardt, Andreas A1 - Guntermann, P. A1 - Saur, G. A1 - Gartzen, Johannes T1 - Neue Impulse für den Leichtbau. Ein Konstruktionsprinzip für Verbauplatten mit Laserschweißen am verdeckten Stoß. JF - Laser-Praxis (1996) Y1 - 1996 SN - 0937-7069 SP - 21 EP - 24 ER - TY - JOUR A1 - Kämper, Klaus-Peter A1 - Picard, Antoni A1 - Brill, Manfred A1 - Cassel, Detlef (u.a.) T1 - Neue Medien für die praktische MST Ausbildung JF - Rundschau, FH Kaiserslautern,. Ausgabe Ju (2002) Y1 - 2002 SP - 14 EP - 15 ER - TY - JOUR A1 - Wilbring, Daniela A1 - Enning, Manfred A1 - Pfaff, Raphael A1 - Schmidt, Bernd T1 - Neue Perspektiven für die Bahn in der Produktions- und Distributionslogistik durch Prozessautomation JF - ETR - Eisenbahntechnische Rundschau Y1 - 2020 SN - 0013-2845 VL - 69 IS - 3 SP - 15 EP - 19 ER - TY - JOUR A1 - Baatz, Udo A1 - Kehrmann, H. T1 - Neue Produkte - per Zufall oder mit System? JF - Jahrbuch für Führungskräfte Y1 - 1981 PB - Expert-Verl. CY - Grafenau, Zürich ER - TY - JOUR A1 - Klocke, Martina T1 - Neue Technologien - eine Herausforderung für Klein- und Mittelbetriebe JF - CIM, Bedeutung für die Weiterbildung in Klein- und Mittelbetrieben : [Bericht über den EUROTECNET-Workshop "CIM - Bedeutung für die Weiterbildung in Klein- und Mittelbetrieben" vom 16. bis 17. Oktober 1991 in Elmshorn (BR Deutschland)] / [Bericht erstattet von Martina Klocke] Y1 - 1992 N1 - Workshop "CIM - Bedeutung für die Weiterbildung in Klein- und Mittelbetrieben" <1991, Elmshorn> SP - 6 EP - 8 PB - EUROTECNET CY - Brüssel ER - TY - GEN A1 - Wollert, Jörg T1 - Neue Wege in der Kommunikation - Wireless Technologie für Automatisierungslösungen Y1 - 2010 SP - 1 EP - 17 ER - TY - JOUR A1 - Schwarz, Alexander A1 - Gebhardt, Andreas A1 - Schleser, Markus A1 - Popoola, Patricia T1 - New Welding Joint Geometries Manufactured by Powder Bed Fusion from 316L JF - Materials Performance and Characterization 8 Y1 - 2019 U6 - http://dx.doi.org/10.1520/MPC20180096 SN - 2379-1365 IS - in press ER - TY - JOUR A1 - Enning, Manfred A1 - Zambou, Nathan A1 - Abel, Dirk T1 - Nonlinear spacing control of following vehicles within platoon a controlled lagrangian approach / Zambou, Nathan ; Enning, Manfred ; Abel, Dirk JF - NOLCOS, IFAC Symposium on Nonlinear Control Systems Y1 - 2004 N1 - NOLCOS, 2004, IFAC Symposium on Nonlinear Control Systems, 6th, Stuttgart, DE, 2004-09-01 - 2004-09-03 SP - 1211 EP - 1216 ER - TY - CHAP A1 - Reisgen, Uwe A1 - Schleser, Markus A1 - Scheik, Sven A1 - Michaeli, Walter A1 - Grönlund, Oliver A1 - Neuß, Andreas A1 - Wunderle, Johannes A1 - Poprawe, Reinhart A1 - Rösner, A. A1 - Bobzin, Kirsten A1 - Schläfer, Thomas A1 - Theiß, Sebastian A1 - Kutschmann, Pia A1 - Haberstroh, Edmund A1 - Flock, Dustin A1 - Bührig-Polaczek, Andreas A1 - Jakob, M. ED - Thoben, Klaus-Dieter T1 - Novel process chains for the production of plastics/metal-hybrids T2 - 17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011 Y1 - 2011 SN - 978-1-457-70772-8 ; 978-3-943024-05-0 SP - 596 EP - 604 PB - IEEE CY - Piscataway, NJ ER - TY - JOUR A1 - Seiler, Friedrich A1 - Pichler, Alexander A1 - Pfaff, Raphael A1 - Srulijes, Julio T1 - Novel processing tools for automated doppler picture velocimetry (DPV) evaluation JF - Journal of visualization Y1 - 2009 SN - 1343-8875 VL - Vol. 12 IS - Iss. 4 SP - 323 EP - 337 ER - TY - BOOK A1 - Engeln-Müllges, Gisela A1 - Uhlig, Frank T1 - Numeric Algorithms with Fortran Y1 - 1996 SN - 3-540-60529-0 PB - Springer CY - Berlin [u.a.] ER -