TY - JOUR A1 - Heinrichs, Horst T1 - STEP bietet mehr Y1 - 1992 N1 - Konferenz-Einzelbericht : FEM '92 Congress, Int. FEM-Congress, Baden-Baden, DE, 16.-17. Nov, 1992 SP - 327 EP - 344 PB - IKOSS CY - Stuttgart ER - TY - JOUR A1 - Heinrichs, Horst T1 - Mit Grafik schafft FEM den Durchbruch JF - Maschinen, Anlagen, Verfahren (1993) Y1 - 1993 SN - 0343-043X SP - 58 EP - 59 ER - TY - JOUR A1 - Heinrichs, Horst T1 - Verbindung von CAD und CAE mittels der systemneutralen CAD I Schnittstelle Y1 - 1989 N1 - Konferenz-Einzelbericht : FEM '89, International FEM-Congress, IKO Software Service, Baden-Baden, D, 20.-21.11.1989 SP - 391 EP - 408 ER - TY - JOUR A1 - Heinrichs, Horst T1 - Graphische Datenverarbeitung bei FEM-Berechnungen von Maschinen : interaktive Geometrieerfassung u. Netzwerkerstellung Y1 - 1981 N1 - Dissertation, RWTH Aachen ER - TY - JOUR A1 - Heinrichs, Horst T1 - Graphisch interaktive FE-Netzwerksgenerierung mit dem Programm FEDIG auf Rechnern ab 64 KB-Memory mit Digitizer JF - IKO Software Service. 12 (1983) Y1 - 1983 N1 - Konferenz-Einzelbericht : International FEM-Congress. IKO Software Service, Baden-Baden, 14.- 15.11.1983 SP - 191 EP - 215 ER - TY - JOUR A1 - Heinrichs, Horst T1 - Graphisch interaktiver FEM-Berechnungsarbeitsplatz JF - Konstruktion, Elemente, Methoden. 21 (1984), H. 2 Y1 - 1984 SP - 82 EP - 85 ER - TY - JOUR A1 - Haselgruber, Nikolaus A1 - Mautner, Karin A1 - Thiele, Jan T1 - Usage Space Analysis for Reliability Testing JF - Quality and Reliability Engineering International N2 - During the development process of a complex technical product, one widely used and important technique is accelerated testing where the applied stress on a component is chosen to exceed the reference stress, i.e. the stress encountered in field operation, in order to reduce the time to failure. For that, the reference stress has to be known. Since a complex technical product may fail regarding numerous failure modes, stress in general is highly dimensional rather than scalar. In addition, customers use their products individually, i.e. field operation should be described by a distribution rather than by one scalar stress value. In this paper, a way to span the customer usage space is shown. It allows the identification of worst case reference stress profiles in significantly reduced dimensions with minimal loss of information. The application example shows that even for a complex product like a combustion engine, stress information can be compressed significantly. With low measurement effort it turned out that only three reference stress cycles were sufficient to cover a broad range of customer stress variety. Y1 - 2010 U6 - http://dx.doi.org/10.1002/qre.1155 SN - 1099-1638 N1 - Special Issue: Business and Industrial Statistics: Developments and Industrial Practices in Quality and Reliability VL - 26 IS - 8 SP - 877 EP - 885 PB - Wiley CY - New York ER - TY - CHAP A1 - Hartmann, Axel A1 - Kallweit, Stephan A1 - Feldusen, Antje A1 - Schröder, Wolfgang T1 - Detection of upstream propagating sound waves at buffet flow using high-speed PIV BT - 16th International Symposium on Applications of Laser Techniques to Fluid Mechanics ; 9th to 12th July 2012 Lisbon, Portugal Y1 - 2012 N1 - Aerodynamisches Institut ; International Symposium on Applications of Laser Techniques to Fluid Mechanics <16, 2012, Lissabon> ER - TY - JOUR A1 - Harms, Alexander A1 - Reisgen, Uwe A1 - Schleser, Markus A1 - Schiebahn, Alexander A1 - Thiele, Regina T1 - Herausforderungen an die Fügetechnik: Leichtbau und Kosteneffizienz beim Elektrofahrzeug JF - Elektromobilität made in Aachen. (RWTH-Themen : Berichte aus der Rheinisch-Westfälischen Technischen Hochschule Aachen ; Ausg. 2010, 2) Y1 - 2010 SN - 0179-079X SP - 58 EP - 60 ER - TY - JOUR A1 - Hanrath, Wilhelm A1 - Plesken, Wilhelm T1 - Group rings and irreducible representations of space groups / by W. Hanrath and W. Plesken JF - Journal für die reine und angewandte Mathematik. 362 (1985) Y1 - 1985 SN - 0075-4102 SP - 130 EP - 140 ER - TY - JOUR A1 - Hanrath, Wilhelm A1 - Plesken, Wilhelm T1 - The lattices of six-dimensional euclidean space JF - Mathematics of computation. 43 (1984), H. 168 Y1 - 1984 SN - 0025-5718 SP - 573 EP - 587 ER - TY - BOOK A1 - Hanrath, Wilhelm T1 - Irreduzible Darstellungen von Raumgruppen Y1 - 1988 N1 - Aachen, Techn. Hochsch., Diss., 1988 CY - Aachen ER - TY - JOUR A1 - Hanrath, Wilhelm T1 - Character tables of some factor groups of space groups JF - Perfect groups / Derek F. Holt and W. Plesken Y1 - 1989 SN - 0-19-853559-7 SP - 357 EP - 359 PB - Clarendon Press CY - Oxford ER - TY - JOUR A1 - Haag, S. A1 - Zontar, D. A1 - Schleupen, Josef A1 - Müller, T. A1 - Brecher, C. T1 - Chain of refined perception in self-optimizing assembly of micro-optical systems JF - Journal of sensors and sensor systems N2 - Today, the assembly of laser systems requires a large share of manual operations due to its complexity regarding the optimal alignment of optics. Although the feasibility of automated alignment of laser optics has been shown in research labs, the development effort for the automation of assembly does not meet economic requirements – especially for low-volume laser production. This paper presents a model-based and sensor-integrated assembly execution approach for flexible assembly cells consisting of a macro-positioner covering a large workspace and a compact micromanipulator with camera attached to the positioner. In order to make full use of available models from computer-aided design (CAD) and optical simulation, sensor systems at different levels of accuracy are used for matching perceived information with model data. This approach is named "chain of refined perception", and it allows for automated planning of complex assembly tasks along all major phases of assembly such as collision-free path planning, part feeding, and active and passive alignment. The focus of the paper is put on the in-process image-based metrology and information extraction used for identifying and calibrating local coordinate systems as well as the exploitation of that information for a part feeding process for micro-optics. Results will be presented regarding the processes of automated calibration of the robot camera as well as the local coordinate systems of part feeding area and robot base. Y1 - 2014 U6 - http://dx.doi.org/10.5194/jsss-3-87-2014 SN - 2194-878X VL - 3 IS - 1 SP - 87 EP - 95 PB - Copernicus Publ. CY - Göttingen ER - TY - CHAP A1 - Göttsche, Joachim A1 - Hinsch, Andreas A1 - Wittwer, Volker ED - Hugo-Le Goff, Anne T1 - Electrochromic and optical properties of mixed WO3-TiO2 thin films produced by sputtering and the sol-gel technique T2 - Optical materials technology for energy efficiency and solar energy conversion XI: chromogenics for smart windows : 19 and 21 May 1992, Toulouse-Labège. (SPIE proceedings series. 1728) Y1 - 1992 SN - 0-8194-0901-4 SP - 13 EP - 25 PB - SPIE CY - Bellingham, Wash. ER - TY - BOOK A1 - Grundmann, Reinhard A1 - Schönholtz, Friedrich T1 - „Ventilatoren-Fibel“ der Firma Babcock-BSH Y1 - 1999 N1 - Neuauflage überarbeitet und ergänzt von Herbert Eidam und Bernd Rahn PB - Promotor-Verlag CY - Karlsruhe ER - TY - JOUR A1 - Grundmann, Reinhard A1 - Kramer, Carl A1 - Gerhardt, Hans Joachim T1 - Zonenabsaugung und Belüftung für eine Produktionshalle mit zeitweilig auftretender hoher Staubentwicklung JF - DKV-Tagungsbericht, Deutscher Kälte- und Klimatechnischer Verein. 4 (1989) Y1 - 1989 SN - 0172-8849 N1 - Konferenz-Einzelbericht SP - 981 EP - 998 ER - TY - JOUR A1 - Grundmann, Reinhard A1 - Kramer, Carl T1 - Einheitliche Darstellung von Strömungsgeräuschen. Beschreibung der Schalleistung und Darstellung einiger Strömungsgeräusche - 2. Teil. JF - HLH - Zeitschrift für Heizung, Lüftung, Klimatechnik, Haustechnik. 42 (1991), H. 4 Y1 - 1991 SN - 0017-9906 SP - 275 EP - 281 ER - TY - JOUR A1 - Grundmann, Reinhard A1 - Kramer, Carl T1 - Einheitliche Darstellung von Strömungsgeräuschen. Beschreibung der Schalleistung und Darstellung einiger Strömungsgeräusche. 1. Teil. JF - HLH - Zeitschrift für Heizung, Lüftung, Klimatechnik, Haustechnik. 42 (1991), H. 3 Y1 - 1991 SN - 0017-9906 SP - 233 EP - 238 ER - TY - JOUR A1 - Grundmann, Reinhard A1 - Kramer, Carl T1 - Entwurfskriterien für Aeroakustik-Windkanäle und Möglichkeiten zur Nachrüstung bestehender Windkanäle  Entwurfskriterien für Aeroakustik-Windkanäle und Möglichkeiten zur Nachrüstung bestehender Windkanäle JF - Akustik und Aerodynamik des Kraftfahrzeuges : Grundlagen - Optimierungsmethoden - Meß- und Versuchstechnik ; mit 11 Tabellen und 243 Literaturstellen ; [Beiträge der Tagung 'Akustik und Aerodynamik des Kraftfahrzeuges' ... am 1. und 2. Februar 1994] / Sye Y1 - 1995 SN - 3-8169-1190-0 SP - 377 EP - 394 PB - Expert-Verl. CY - Renningen-Malmsheim ER - TY - JOUR A1 - Grundmann, Reinhard A1 - Kramer, C. A1 - Konrath, B. T1 - Der Aeroakustik-Fahrzeugwindkanal von Ford. JF - Automobiltechnische Zeitschrift - ATZ. 103 (2001), H. 10 Y1 - 2001 SN - 0001-2785 SP - 932 EP - 938 ER - TY - JOUR A1 - Grundmann, Reinhard A1 - Kramer, C. A1 - Hilge, B. T1 - Prinzipien und Entwurf von Anlagen zur Wärmebehandlung von Halbzeugen Y1 - 1986 N1 - Konferenz-Einzelbericht : Walzen von Flachprodukten, Vortragstexte eines Symp. der Dt. Ges. f. Metallkunde (DGM) SP - 129 EP - 146 ER - TY - BOOK A1 - Grundmann, Reinhard A1 - Hallmann, Willi A1 - Schäfer, Horst T1 - Entwicklung eines einfachen Windmessgeraetes fuer Entwicklungslaender Y1 - 1983 N1 - Forschungsbericht / Bundesministerium für Forschung und Entwicklung : T, Technologische Forschung und Entwicklung ; 83-310 : Nichtnukleare Energietechnik PB - FIZ Energie, Physik, Mathematik CY - Eggenstein-Leopoldshafen ER - TY - JOUR A1 - Grundmann, Reinhard A1 - Gerhardt, Hans Joachim T1 - Hart im Wind - Windgeräusche an Fassadenelementen JF - db deutsche bauzeitung. 130 (1996), H. 8 Y1 - 1996 SP - 96 EP - 98 ER - TY - JOUR A1 - Grundmann, Reinhard A1 - Bommes, Leonhard A1 - Klaes, Klaus A1 - Kramer, Carl u.a. T1 - Der Einfluß der Schaufelgestalt von Zentrifugallüftern auf deren Leistung und Geräuschpegel JF - Noise Control Engineering Journal. 43 (1995), H. 4 Y1 - 1995 SN - 0736-2501 SP - 91 EP - 101 ER - TY - JOUR A1 - Grundmann, Reinhard A1 - Bommes, Leonhard T1 - Analyse von Kennfeldern drallgesteuerter Radialventilatoren JF - HLH - Zeitschrift für Heizung, Lüftung, Klimatechnik, Haustechnik. 55 (2004), H. 8 Y1 - 2004 SN - 0017-9906 SP - 54 EP - 62 ER - TY - JOUR A1 - Grundmann, Reinhard A1 - Bommes, Leonard A1 - Reinartz, Dieter T1 - Auswahl, Bemessung und Beurteilung eines Radialventilators hohen Wirkungsgrades - Teil 2 JF - HLH - Zeitschrift für Heizung, Lüftung, Klimatechnik, Haustechnik. 49 (1998), H. 7 Y1 - 1998 SN - 0017-9906 SP - 44 EP - 50 ER - TY - BOOK A1 - Grundmann, Reinhard A1 - Bommes, Leonard A1 - Fricke, Jürgen T1 - Ventilatoren Y1 - 2003 SN - 3-8027-3200-6 N1 - Mitherausgeber und Mitautor PB - Vulkan-Verlag CY - Essen ER - TY - JOUR A1 - Grundmann, Reinhard A1 - Bommes, Leonard A1 - Dieter, Reinartz T1 - Auswahl, Bemessung und Beurteilung eines Radialventilators hohen Wirkungsgrades - Teil 1 JF - HLH - Zeitschrift für Heizung, Lüftung, Klimatechnik, Haustechnik. 49 (1998), H. 5 Y1 - 1998 SN - 0017-9906 SP - 28 EP - 37 ER - TY - JOUR A1 - Grundmann, Reinhard T1 - Raumlufttechnik, Lüftungstechnik, Klimatechnik, Lärm JF - HLH - Zeitschrift für Heizung, Lüftung, Klimatechnik, Haustechnik. 55 (2004), H. 12 Y1 - 2004 SN - 0017-9906 SP - 46 EP - 49 ER - TY - JOUR A1 - Grundmann, Reinhard T1 - Vergleich von Geräuschmessung und -prognose nach VDI 3731 JF - HLH - Zeitschrift für Heizung, Lüftung, Klimatechnik, Haustechnik. 44 (1993), H. 8 Y1 - 1993 SN - 0017-9906 SP - 513 EP - 516 ER - TY - JOUR A1 - Grundmann, Reinhard T1 - Allgemeines Geräuschgesetz und spezifische Schallkenngrößen. JF - HLH - Zeitschrift für Heizung, Lüftung, Klimatechnik, Haustechnik. 43 (1992), H. 8 Y1 - 1992 SN - 0017-9906 SP - 437 EP - 440 ER - TY - JOUR A1 - Grundmann, Reinhard T1 - Ähnlichkeitsgesetze JF - Ventilatoren : mit ausgewählten Problemlösungen für den Geräte- und Anlagenbau / Leonhard Bommes ... Y1 - 1990 SN - 3-8169-0426-2 N1 - Serie : Kontakt & Studium ; 292 : Maschinenbau ; 292 : Maschinenbau SP - 34 EP - 88 PB - expert-Verl. CY - Ehningen bei Böblingen ER - TY - JOUR A1 - Grundmann, Reinhard T1 - Design Criteria for Aeroacoustic Wind Tunnels Y1 - 1992 N1 - Konferenzeinzelbericht : DGLR-workshop : Joint meeting of the Specialists Groups Test Facilities/Aeroacoustics - Flight Noise . Deutsche Gesellschaft für Luft- und Raumfahrt. Test Facilities Specialist Group ; Deutsche Gesellschaft für Luft- und Raumfahr ER - TY - JOUR A1 - Grundmann, Reinhard T1 - Analyse und Beurteilung des Geräusches von Radialventilatoren JF - The Fifth Conference Industrial Fans / J. Otte Y1 - 1997 N1 - Konferenzeinzelbericht : 5th Conference Industrial Fans ; (1997.10.06-08; Zakopane) CY - Gliwice ER - TY - BOOK A1 - Grundmann, Reinhard T1 - Praxishandbuch Thermoprozess-Technik : 1. Grundlagen - Verfahren / Carl Kramer ... (Hrsg.) Y1 - 2002 SN - 3-8027-2922-6 N1 - Mitautor PB - Vulkan-Verl. CY - Essen ER - TY - JOUR A1 - Grundmann, Reinhard T1 - Windgeräusche auf gemeinsamen Nenner gebracht - Vorschlag für eine einheitliche Bezeichnung der Emissionskenngrößen von aerodynamischen Geräuschquellen JF - HLH - Zeitschrift für Heizung, Lüftung, Klimatechnik, Haustechnik. 42 (1991), H. 1 Y1 - 1991 SN - 0017-9906 N1 - Kurzbericht SP - 54 EP - 55 ER - TY - CHAP A1 - Großmann, Agnes A1 - Gabrielli, Roland Antonius A1 - Herdrich, Georg A1 - Fasoulas, Stefanos A1 - Schnauffer, Peter A1 - Middendorf, Peter A1 - Fateri, Miranda A1 - Gebhardt, Andreas T1 - Overview of the MultiRob 3D Lunar Industrial Development Project T2 - Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015 Y1 - 2015 ER - TY - CHAP A1 - Gregorio, Fabrizio de A1 - Fatigati, Giovanni A1 - Kallweit, Stephan T1 - Tiltrotor airframe flow field characterization by SPIV T2 - 11th International Symposium on Partivle Image Velocimetry - PIV15 , Santa Barbara, California, Sept 14-16, 2015 Y1 - 2015 ER - TY - JOUR A1 - Glowania, Michael A1 - Gries, Thomas A1 - Schoene, Jens A1 - Schleser, Markus A1 - Reisgen, Uwe T1 - Innovative coating technology for textile reinforcements of concrete applications JF - 13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466) Y1 - 2011 SN - 978-3-03785-008-4 SN - 1013-9826 (E-Journal) ; 0252-1059 (Print) SP - 167 EP - 173 PB - Trans Tech Publications CY - Bäch ER - TY - CHAP A1 - Gerhards, Benjamin A1 - Schleser, Markus A1 - Otten,, Christian A1 - Schwarz, Alexander A1 - Gebhardt, Andreas T1 - Innovative Laser Beam Joining Technology for Additive Manufactured Parts T2 - Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava Y1 - 2019 SP - 1 EP - 8 ER - TY - CHAP A1 - Gerhards, Benjamin A1 - Schleser, Markus A1 - Otten, Christian T1 - Advancements of mobile vacuum laser welding for industrial thick sheet applications T2 - Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava Y1 - 2019 SP - 1 EP - 8 ER - TY - JOUR A1 - Gebhardt, Andreas A1 - Schmidt, Frank-Michael A1 - Hötter, Jan-Steffen A1 - Sokalla, Wolfgang A1 - Sokalla, Patrick T1 - Additive Manufacturing by selective laser melting the realizer desktop machine and its application for the dental industry JF - Physics Procedia Y1 - 2010 SN - 1875-3892 N1 - Laser Assisted Net Shape Engineering 6, Proceedings of the LANE 2010, Part 2 VL - 5 IS - 2 SP - 543 EP - 549 ER - TY - JOUR A1 - Gebhardt, Andreas A1 - Schmidt, Frank-Michael T1 - Practical experiences with making and finishing of coloured models using 3D printing Y1 - 2002 N1 - International Conference on Rapid Prototyping and Manufacturing <2, 2002, Beijing> ER - TY - CHAP A1 - Gebhardt, Andreas A1 - Schmidt, Frank-Michael T1 - Farbige Prototypen als Werkzeug für den Konstrukteur T1 - Colored prototypes as instrument for the constructing engineer N2 - Physische Prototypen, also Anschauungs- und Funktionsmodelle nach den generativen oder Rapid Prototyping (RP) Verfahren haben sich in diesem Zusammenhang vor allem als Hilfsmittel zur effektiven Kommunikation und zur Evaluierung von Produkteigenschaften einen festen Platz in der Produktentstehung erworben. Die positiven Effekte der etablierten RP Verfahren sind unumstritten. Einfachere, schnellere und wirtschaftlichere Maschinen (Prototyper, Fabrikator), vor allem auch für die Büroumgebung, geben neue Impulse im Sinne der Optimierung der heutigen Verfahren. Eine neue Dimension verspricht die Option „Farbe“ der bisher fast ausschließlich monochromen Modelle. Ist Farbe nur „nice to have“ oder welchen Effekt haben farbige Modelle als Werkzeug von Konstrukteuren und Produktenwicklern? Welche Perspektiven bietet „Farbe“ darüber hinaus? KW - Prototyping KW - Rapid prototyping KW - Prototypen KW - Funktionsmodelle KW - Produktentstehung KW - Prototyper KW - Produktenwicklung KW - prototypes KW - working models KW - product emergence KW - prototyper KW - product development Y1 - 2005 ER - TY - JOUR A1 - Gebhardt, Andreas A1 - Schmachtenberg, E. T1 - Rapid Prototyping und Tooling Y1 - 1996 N1 - Konferenz-Einzelbericht : 7. Würzburger Werkzeugtage, Produktivitätsverbesserungen, neue Technologien, Fachtagung, Würzburg, DE, 24.-25. Sep, 1996 SP - 1 EP - 20 ER - TY - JOUR A1 - Gebhardt, Andreas A1 - Plum, H.D. A1 - Mathar, W. A1 - Wolf, M. T1 - TrueForm - erste Anwendung des neuen Sintermaterials mit Vakuumgießen und Investmentgießen Y1 - 1996 N1 - Konferenz-Einzelbericht : RPD, Internat. Conf. on Rapid Product Development, Proc., Stuttgart, DE, Jun 10-11 SP - 231 EP - 236 ER - TY - JOUR A1 - Gebhardt, Andreas A1 - Plug, T-K. T1 - Innovationsschub mittels Rapid-Prototyping, Teil II JF - CAD-CAM Report. 14 (1995), H. 9 Y1 - 1995 SN - 0930-7117 SP - 78 EP - 85 ER - TY - JOUR A1 - Gebhardt, Andreas A1 - Pflug, T-K. T1 - Innovationsschub mittels Rapid-Prototyping. Teil I JF - CAD-CAM Report. 14 (1995), H. 7 Y1 - 1995 SN - 0930-7117 SP - 56 EP - 65 ER - TY - JOUR A1 - Gebhardt, Andreas A1 - Mathar, W. A1 - Plum, H.-D. T1 - SFM-System Stereolithographie und selektives Lasersintern im Vergleich Y1 - 1994 N1 - Konferenz-Einzelbericht : Solid freeform manufacturing/Intelligente Produktionssysteme, Internationale Konferenz, Dresden, DE, 29.-30.9.1994 SP - 85 EP - 95 ER -