TY  - JOUR
A1  - Ahmed, Essam
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
T1  - On formability of tailor laser welded blanks of DP/TRIP steel sheets
JF  - Science and technology of welding and joining
N2  - This paper aims to evaluate the formability of tailor welded blanks of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets. In this work, bead on plate butt joints of 2·5 mm DP600 and 1·2 mm TRIP700 steel sheets were performed using CO2 laser beam welding. Microhardness measurements and transverse tensile testing were carried out to characterise the welds. The formability of base metals and welds were investigated by standard Erichsen test. In a perpendicular tensile test to the weld line, all specimens were fractured at the TRIP base metal, and the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of the DP600/TRIP700 steel sheets, and the formability increased with increasing welding speed.
Y1  - 2010
U6  - http://dx.doi.org/10.1179/136217110X12731414739754
SN  - 1743-2936
VL  - 15
IS  - 5
SP  - 337
EP  - 342
PB  - Maney
CY  - Leeds
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Zabirov, Alexander
T1  - Simulation des Tropfenübergangs beim MSG-Impulslichtbogenschweißen
T2  - Große Schweißtechnische Tagung 2011 : Studentenkongress 2011, Abschlusskolloquium Lichtbogenschweißen 2011; Vorträge der Veranstaltung in Hamburg
Y1  - 2011
SN  - 978-3-87155-267-0
SP  - 554
EP  - 559
PB  - DVS-Media
CY  - Düsseldorf
ER  - 
TY  - PAT
A1  - Schoene, Jens
A1  - Glowania, Michael
A1  - Schleser, Markus
A1  - Gries, Thomas
A1  - Reisgen, Uwe
T1  - Betonteil und Verfahren zum Bewehren von Teilen aus Beton / Offenlegungsschrift
Y1  - 2011
PB  - Dt. Patent- und Markenamt
CY  - München
ER  - 
TY  - CHAP
A1  - Schoene, Jens
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Jerabek, Jakub
ED  - Curbach, Manfred
T1  - Theoretische und experimentelle Untersuchung des spaltungsinduzierten Versagens von TRC Prüfkörpern
T2  - Textilbeton - Theorie und Praxis : Tagungsband zum 6. Kolloquium zu textilbewehrten Tragwerken (CTRS6); gemeinsames Abschlusskolloquium der Sonderforschungsbereiche 528 (Dresden) und 532 (Aachen), Berlin 19.9.2011 - 20.9.2011
Y1  - 2011
SN  - 978-3-86780-245-1
SP  - 73
EP  - 84
PB  - Techn. Univ.
CY  - Dresden
ER  - 
TY  - JOUR
A1  - Mukherjee, Krishnendu
A1  - Ramazani, Ali
A1  - Yang, Li
A1  - Prahl, Ulrich
A1  - Bleck, Wolfgang
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
T1  - Characterization of gas metal arc welded hot rolled DP600 steel
JF  - Steel research international
Y1  - 2011
SN  - 1869-344X (E-Book); 1611-3683 (Print)
VL  - Vol. 82
IS  - Iss. 12
SP  - 1408
EP  - 1416
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Turichin, Gleb
A1  - Valdaitseva, Elena
A1  - Bach, Friedrich-Wilhelm
A1  - Hassel, Thomas
A1  - Beniyashi, Alexander
T1  - Investigation of factors for defect-free weld formation by non-vacuum electron beam welding
T2  - Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine
Y1  - 2011
SP  - 104
EP  - 109
PB  - Paton Publ. House
CY  - Kiev
ER  - 
TY  - JOUR
A1  - Glowania, Michael
A1  - Gries, Thomas
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Innovative coating technology for textile reinforcements of concrete applications
JF  - 13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)
Y1  - 2011
SN  - 978-3-03785-008-4
SN  - 1013-9826 (E-Journal) ; 0252-1059 (Print)
SP  - 167
EP  - 173
PB  - Trans Tech Publications
CY  - Bäch
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Numerical and experimental investigation of tensile behavior of laser beam welded TRIP700 steel
JF  - ISIJ international
Y1  - 2011
SN  - 1347-5460 (E-Journal); 0915-1559 (Print)
VL  - Vol. 51
IS  - No. 3
SP  - 429
EP  - 434
PB  - ISIJ
CY  - Tōkyō
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Harms, Alexander
A1  - Schiebahn, Alexander
A1  - Naumov, Andreas
T1  - Erweiterung des Parameterfelds zum Rührreibschweißen mittels konduktiver Unterstützung
JF  - Schweissen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren
Y1  - 2011
SN  - 0036-7184
VL  - Bd. 63
IS  - H. 12
SP  - 710
EP  - 714
PB  - DVS-Media GmbH
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Scheik, Sven
A1  - Michaeli, Walter
A1  - Grönlund, Oliver
A1  - Neuß, Andreas
A1  - Wunderle, Johannes
A1  - Poprawe, Reinhart
A1  - Rösner, A.
A1  - Bobzin, Kirsten
A1  - Schläfer, Thomas
A1  - Theiß, Sebastian
A1  - Kutschmann, Pia
A1  - Haberstroh, Edmund
A1  - Flock, Dustin
A1  - Bührig-Polaczek, Andreas
A1  - Jakob, M.
ED  - Thoben, Klaus-Dieter
T1  - Novel process chains for the production of plastics/metal-hybrids
T2  - 17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011
Y1  - 2011
SN  - 978-1-457-70772-8 ; 978-3-943024-05-0
SP  - 596
EP  - 604
PB  - IEEE
CY  - Piscataway, NJ
ER  -