TY  - JOUR
A1  - Kallweit, Stephan
A1  - Helbing, M.
A1  - Orglmeister, R.
A1  - Siekmann, H. E.
T1  - Image Processing Techniques with Neural Networks for Flow Visualization in Rotating Machinery / Helbing, M. ; Orgimeiste, R. [Orglmeister, R.] ; Kallweit, S. ; Siekmann, H. E. ; Dues, M. ; Cronemeyer, J.
JF  - FLUCOME '94 : the 4th Triennial International Symposium on Fluid Control, Measurement and Visualization; August 29 - September 1, 1994, Toulouse, France, International Congress Centre, DIGORA-Labège / CERT/ONERA. General chairman Patrick Hebrard
Y1  - 1994
SP  - 87
EP  - 94
CY  - Toulouse
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Kaminsky, R.
A1  - Rossi, M.
A1  - Morbiducci, U.
T1  - Time resolved PIV technique for high temporal resolution measurements of prosthetic heart valves fluid dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Catellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.
JF  - The International Journal of Artificial Organs. 28 (2005), H. 9
Y1  - 2005
SN  - 1724-6040
N1  - Abstracts: XXXII Annual ESAO Congress, 5-8 October 2005, Bologna - Italy
SP  - 946
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Kaminsky, R.
A1  - Rossi, M.
A1  - Morbiducci, U.
T1  - 2D PIV Study of the flow downstream : Two prototypes of a ney monoleaflet artificial aortic heart valve prosthesis / Kaminsky, R. ; Kramm, K. ; Weber, H. J. ; Simons, A. P. ; Kallweit, S. ; Verdonck, P. R.
JF  - The International Journal of Artificial Organs. 28 (2005), H. 9
Y1  - 2005
SN  - 1724-6040
N1  - Abstracts: XXXII Annual ESAO Congress, 5-8 October 2005, Bologna - Italy
SP  - 921
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Kaminsky, R.
A1  - Rossi, M.
A1  - Morbiducci, U.
T1  - 3D PIV measurements of prosthetic heart valve dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Castellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.
JF  - The International Journal of Artificial Organs. 28 (2005), H. 9
Y1  - 2005
SN  - 1724-6040
N1  - Abstracts: XXXII Annual ESAO Congress, 5-8 October 2005, Bologna - Italy
SP  - 868
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Kaminsky, R.
A1  - Rossi, M.
A1  - Scalise, L.
T1  - PIV Measurements with high temporal Resolution behind Artificial  Heart Valves  / Kaminsky, R. ; Rossi, M. ; Scalise, L. ; Kallweit, S. ; Verdonck, P.
JF  - Proceedings of the 6th International Symposium on Particle Image Velocimetry
Y1  - 2005
N1  - link zum abstract
PB  - Caltech
CY  - Pasadena, CA
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Kaminsky, Radoslav
A1  - Rossi, Massimiliano
A1  - Morbiducci, Umberto
T1  - PIV Measurements of Flows in Artificial Heart Valves / Kaminsky, Radoslav ; Kallweit, Stephan ; Rossi, Massimiliano ; Morbiducci, Umberto ; Scalise, Lorenzo
JF  - Particle Image Velocimetry - New Developments and Recent Applications
Y1  - 2008
SN  - 978-3-540-73528-1
N1  - Topics in Applied Physics
SP  - 55
EP  - 72
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Schimpf, Axel
T1  - Photogrammetric Particle Image Velocimetry / Schimpf, Axel ; Kallweit, Stephan
JF  - Particle image velocimetry : recent improvements; proceedings of the Europiv 2 Workshop held in Zaragoza, Spain, March 31 - April 1, 2003 / edited by M. Stanislas ...
Y1  - 2003
SN  - 3-540-21423-2
SP  - 295
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Uchiyama, R.
A1  - Siekmann, H.
T1  - Fault Diagnostic Method for Pump Running Conditions Based on Process Modeling and Neural Network / Uchiyama, R. ; Kallweit, S. ; Siekmann, H.
JF  - International Journal of Rotating Machinery. 4 (1998), H. 1
Y1  - 1998
SN  - 1542-3034
SP  - 49
EP  - 59
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Vanlanduit, S.
A1  - Vanherzeele, J.
A1  - Brouns, M.
T1  - Time resolved PIV reconstruction of periodic flows / Vanlanduit, S. ; Vanherzeele, J. ; Kallweit, S. ; Brouns, M. ; Guillaume, P.
JF  - PIV'07, 7th International Symposium on Particle Image Velocimetry, Roma, IT, Sep 11-14, 2007
Y1  - 2007
N1  - PIV, Internional Symposium on Particle Image Velocimetry, 7 ; Datei: Vanlanduit.pdf
SP  - 1
EP  - 14
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Willert, Chris
A1  - Dues, Michael
A1  - Müller, Ulrich
T1  - PIV for Volume Flow Metering / Kallweit, Stephan ; Willert, Chris ; Dues, Michael ; Müller, Ulrich ; Lederer, Thomas
Y1  - 2008
N1  - 14th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2008-07-07 - 2008-07-10, Lisbon (Portugal)
SP  - 6 S.
ER  - 
TY  - JOUR
A1  - Kessler, Julia
A1  - Balc, Nicolae
A1  - Gebhardt, Andreas
A1  - Abbas, Karim
T1  - Basic Research on Lattice Structures Focused on the Tensile Strength
JF  - Applied Mechanics and Materials
Y1  - 2015
U6  - http://dx.doi.org/10.4028/www.scientific.net/AMM.808.193
SN  - 1662-7482
N1  - MTeM ; October 14-16, 2015, Cluj-Napoca, Romania
VL  - Vol. 808
SP  - 193
EP  - 198
PB  - Trans Tech Publications
CY  - Bäch
ER  - 
TY  - JOUR
A1  - Kilic, S. A.
A1  - Raatschen, Hans-Jürgen
A1  - Körfgen, B.
A1  - Apaydin, N. M.
A1  - Astaneh-Asl, A.
T1  - FE Model of the Fatih Sultan Mehmet Suspension Bridge Using Thin Shell Finite Elements
JF  - Arabian Journal for Science and Engineering
N2  - This paper presents the results of an eigenvalue analysis of the Fatih Sultan Mehmet Bridge. A high-resolution finite element model was created directly from the available design documents. All physical properties of the structural components were included in detail, so no calibration to the measured data was necessary. The deck and towers were modeled with shell elements. A nonlinear static analysis was performed before the eigenvalue calculation. The calculated natural frequencies and corresponding mode shapes showed good agreement with the available measured ambient vibration data. The calculation of the effective modal mass showed that nine modes had single contributions higher than 5 % of the total mass. They were in a frequency range up to 1.2 Hz. The comparison of the results for the torsional modes especially demonstrated the advantage of using thin shell finite elements over the beam modeling approach.
KW  - Suspension bridge
KW  - 3D nonlinear finite element model
KW  - Thin shell finite elements
KW  - Natural frequency
KW  - Effective modal mass
Y1  - 2017
U6  - http://dx.doi.org/10.1007/s13369-016-2316-y
SN  - 2191-4281
VL  - 42
IS  - 3
SP  - 1103
EP  - 1116
PB  - Springer Nature
ER  - 
TY  - JOUR
A1  - Klocke, Martina
T1  - Study Units in the CIM-Oriented Study Factory
JF  - Qualification for Computer-Integrated Manufacturing. Hrsg.: Felix Rauner
Y1  - 1995
SN  - 3-540-19971-3
SP  - 38
EP  - 51
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - JOUR
A1  - Koster, Arie
A1  - Scheidweiler, Robert
A1  - Tieves, Martin
T1  - A flow based pruning scheme for enumerative equitable coloring algorithms
JF  - A  flow based pruning scheme for enumerative equitable coloring algorithms
N2  - An equitable graph coloring is a proper vertex coloring of a graph G where the sizes of the color classes differ by at most one. The equitable chromatic number is the smallest number k such that G admits such equitable k-coloring. We focus on enumerative algorithms for the computation of the equitable coloring number and propose a general scheme to derive pruning rules for them: We show how the extendability of a partial coloring into an equitable coloring can be modeled via network flows. Thus, we obtain pruning rules which can be checked via flow algorithms. Computational experiments show that the search tree of enumerative algorithms can be significantly reduced in size by these rules and, in most instances, such naive approach even yields a faster algorithm. Moreover, the stability, i.e., the number of solved instances within a given time limit, is greatly improved.
Since the execution of flow algorithms at each node of a search tree is time consuming, we derive arithmetic pruning rules (generalized Hall-conditions) from the network model. Adding these rules to an enumerative algorithm yields an even larger runtime improvement.
Y1  - 2016
U6  - http://dx.doi.org/10.48550/arXiv.1607.08754
N1  - Lehrstuhl II für Mathematik, RWTH Aachen University
SP  - 1
EP  - 30
ER  - 
TY  - JOUR
A1  - Kunkel, Maximilian Hugo
A1  - Gebhardt, Andreas
A1  - Mpofu, Khumbaulani
A1  - Kallweit, Stephan
T1  - Statistical assessment of mechanical properties of selective laser melted specimens of stainless steel
JF  - The International Journal of Advanced Manufacturing Technology
N2  - The rail business is challenged by long product life cycles and a broad spectrum of assembly groups and single parts. When spare part obsolescence occurs, quick solutions are needed. A reproduction of obsolete parts is often connected to long waiting times and minimum lot quantities that need to be purchased and stored. Spare part storage is therefore challenged by growing stocks, bound capital and issues of part ageing. A possible solution could be a virtual storage of spare parts which will be 3D printed through additive manufacturing technologies in case of sudden demand. As mechanical properties of additive manufactured parts are neither guaranteed by machine manufacturers nor by service providers, the utilization of this relatively young technology is impeded and research is required to address these issues. This paper presents an examination of mechanical properties of specimens manufactured from stainless steel through the selective laser melting (SLM) process. The specimens were produced in multiple batches. This paper interrogates the question if the test results follow a normal distribution pattern and if mechanical property predictions can be made. The results will be put opposite existing threshold values provided as the industrial standard. Furthermore, probability predictions will be made in order to examine the potential of the SLM process to maintain state-of-the-art mechanical property requirements.
Y1  - 2018
U6  - http://dx.doi.org/10.1007/s00170-018-2040-8
SN  - 0268-3768
VL  - 98
IS  - 5-8
SP  - 1409
EP  - 1431
PB  - Springer
CY  - London
ER  - 
TY  - JOUR
A1  - Kunkel, Maximilian Hugo
A1  - Gebhardt, Andreas
A1  - Mpofu, Khumbulani
A1  - Kallweit, Stephan
T1  - Quality assurance in metal powder bed fusion via deep-learning-based image classification
JF  - Rapid Prototyping Journal
Y1  - 2019
U6  - http://dx.doi.org/10.1108/RPJ-03-2019-0066
SN  - 1355-2546
VL  - 26
IS  - 2
SP  - 259
EP  - 266
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
T1  - Development of low-cost injection moulded micropumps. Entwicklung von kostengünstigen, mittels Spritzguß hergestellten Mikropumpen / Döpper, J. (u.a.)
JF  - Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH
Y1  - 1996
N1  - Konferenz-Einzelbericht: ACTUATOR, Internat. Conf. on New Actuators, 5
SP  - 37
EP  - 40
CY  - Bremen
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
T1  - Education and Training in MST. Kämper, K.-P.; Picard, A.; Brill, M.; Cassel, D.; Jentsch, A.; Merten, S.; Rollwa, M.
JF  - Mst-News (2003)
Y1  - 2003
SN  - 0948-3128
SP  - 35
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Abraham, D. L.
A1  - Hopster, H.
T1  - Spin-polarized electron-energy-loss spectroscopy on epitaxial fcc Co layers on Cu(001)
JF  - Physical Review B. 45 (1992), H. 24
Y1  - 1992
SN  - 1095-3795
SP  - 14335
EP  - 14346
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Abraham, M.
A1  - Ehrfeld, W.
A1  - Hessel, V.
T1  - Microsystem technology: Between research and industrial application. Abraham, M.; Ehrfeld, W.; Hessel, V.; Kämper, K.-P.; Lacher, M.; Picard, A.
JF  - Microelectronic Engineering. 41-42 (1998)
Y1  - 1998
SN  - 0167-9317
N1  - International Conference on Micro- and Nanofarbication <Athens, Greece, 15 September - 18 September 1998>
SP  - 47
EP  - 52
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Berg, U.
A1  - Begemann, M.
A1  - Hagemann, B. (u.a.)
T1  - Series production and testing of a micro motor. Serienfertigung und Prüfung eines Mikromotors
JF  - Actuator 98 : 6th International Conference on New Actuators ; 17 - 19 June, 1998, Bremen, Germany ; conference proceedings / ed.: Hubert Borgmann ...
Y1  - 1998
SN  - 3-933339-00-6
N1  - Konferenz-Einzelbericht: ACTUATOR, Internat. Conf. on New Actuators
SP  - 552
EP  - 555
PB  - Messe Bremen
CY  - Bremen
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Döpper, J.
A1  - Clemens, M.
A1  - Ehrfeld, W.
T1  - Micro gear pumps for dosing of viscous fluids. / Döpper, J. (u.a.)
JF  - Journal of Micromechanics and Microengineering. 7 (1997), H. 3
Y1  - 1997
SN  - 0960-1317
SP  - 230
EP  - 232
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Döpper, J.
A1  - Ehrfeld, W.
A1  - Hagemann, B.
T1  - Simulation supported design of LIGA Microsystems. Kämper, K.-P.; Döpper, J.; Ehrfeld, W.; Hagemann, B.; Hill, S.D.J.; Lehr, H.
JF  - Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey
Y1  - 1995
SN  - 1-85312-390-0
SP  - 3
EP  - 10
PB  - Computational Mechanics Publ.
CY  - Southampton [u.a.]
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Döpper, J.
A1  - Ehrfeld, W.
A1  - Hagemann, B.
T1  - An investigation of computer modelling for micro-injection moulding. Hill, S.D.J.; Kämper, K.-P.; Dasbach, U.; Döpper, J.; Ehrfeld, W.; Kaupert, M.
JF  - Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey
Y1  - 1995
SN  - 1-85312-390-0
SP  - 275
PB  - Computational Mechanics Publ.
CY  - Southampton [u.a.]
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Döpper, J.
A1  - Ehrfeld, W.
A1  - Oberbeck, S.
T1  - A self-filling low-cost membrane micropump
JF  - Proceedings : an investigation of micro structures, sensors, actuators, machines and systems / sponsored by the IEEE Robotics and Automation Society in cooperation with the ASME Dynamic Systems and Control Division
Y1  - 1998
SN  - 078034412X
N1  - International Workshop on Micro-Electro-Mechanical Systems <11, 1998, Heidelberg>
SP  - 432
EP  - 437
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Ehrfeld, W.
A1  - Döpper, J.
A1  - Hessel, V.
T1  - Microfluidic components for biological and chemical microreactors. Kämper, K.-P.; Ehrfeld, W.; Döpper, J.; Hessel, V.; Lehr, H.; Löwe, H.; Richter, T.; Wolf, A.
JF  - Proceedings : an investigation of micro structures, sensors, actuators, machines and robots ; Nagoya, Japan, January 26 - 30, 1997 / IEEE Robotics and Automation Society ...
Y1  - 1997
SN  - 0-7803-3744-1
N1  - International Workshop on Micro-Electro-Mechanical Systems <10, 1997, Nagoya>
SP  - 338
EP  - 343
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Ehrfeld, W.
A1  - Hagemann, B.
A1  - Lehr, H.
T1  - Electromagnetic permanent magnet micromotor with integrated micro gear box. Kämper, K.-P.; Ehrfeld, W.; Hagemann, B.; Lehr, H.; Michel, F.; Schirling, A.; Thürigen, C.; Wittig, T.
JF  - Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH
Y1  - 1996
N1  - International Conference on New Actuators <5, 1996, Bremen>
SP  - 429
CY  - Bremen
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Ehrfeld, W.
A1  - Hessel, V.
A1  - Lacher, M.
T1  - Market oriented development and production of microdevices. Ehrfeld, W.; Hessel, V.; Kämper, K.-P.; Lacher, M.; Picard, A.; Schmidt, M.; Schulz, C.
JF  - Proceedings : 21th International Conference on Microelectronics : MIEL '97 ; Niš, Yugoslavia, 14-17 September 1997. Vol. 1
Y1  - 1997
SN  - 0-7803-3664-X
SP  - 71
EP  - 79
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Hagemann, B.
A1  - Lehr, H.
A1  - Michel, F.
T1  - LIGA Example 2: Electromagnetic Micromotor. Hagemann, B.; Kämper, K.-P.; Lehr, H.; Michel, F.; Thürigen, C.
JF  - LIGA technique / Hans-Dieter Bauer (ed.). [Developed by UETP-MEMS, University Training Partnership for Micro-Electro-Mechanical Systems ...]. - 2.ed.
Y1  - 1995
N1  - University Enterprise Training Partnership for Micro-Electro-Mechanical Systems
SP  - 100
EP  - 110
PB  - FSRM
CY  - Neuchatel
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Kurzawa, R.
A1  - Schmitt, W.
A1  - Güntherodt, G.
T1  - Spin-resolved photoemission study of in situ grown epitaxial Fe layers on W(110). Kurzawa, R.; Kämper, K.-P.; Schmitt, W.; Güntherodt, G.
JF  - Solid State Communications. 60 (1986), H. 10
Y1  - 1986
SN  - 0038-1098
SP  - 777
EP  - 780
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Lehr, H.
A1  - Abel, S.
A1  - Döpper, J.
T1  - Microactuators as driving units for microrobotic systems. Herstellung von Mikroaktoren mit dem LIGA-Verfahren für Mikroroboter  / Lehr, H.; Abel, S.; Döpper, J.; Ehrfeld, W.; Hagemann, B.; Kämper, K.-P.; Michel, F.; Schulu, c.; Thürigen, C.
JF  - Proceedings of the SPIE - The International Society for Optical Engineering
Y1  - 1996
SN  - 0277-786X
N1  - Konferenz-Einzelbericht.
SP  - 202
EP  - 210
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Lehr, H.
A1  - Abel, S.
A1  - Ehrfeld, W.
T1  - Assembly of Electromagnetic Milliactuators with LIGA Components. Lehr, H.; Abel, S.; Ehrfeld, W.; Hagemann, B.; Kämper, K.-P.; Michel, F.; Thürigen, C.
JF  - Proceedings 2nd Japan-France Congress on Mechatronics, Takamatsu (Kagawa, Japan) 1.-3. November 1994, 31 (1994)
Y1  - 1995
N1  - 2nd Japan-France Congress on mechatronics (1994 Nov : Takamatsu, Japan)
SP  - 31
EP  - 31
PB  - Fuji Technology Press
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Lehr, H.
A1  - Ehrfeld, W.
A1  - Hagemann, B.
T1  - Development of micro and millimotors. Lehr, H.; Ehrfeld, W.; Hagemann, B.; Kämper, K.-P.; Michel, F.; Schulz, C.; Thürigen C.
JF  - Minimally Invasive Therapy and Allied Technologies. 6 (1997)
Y1  - 1997
SN  - 1364-5706
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Lehr, H.
A1  - Ehrfeld, W.
A1  - Michel, F.
T1  - LIGA Components for the Construction of Milliactuators. Lehr, H.; Ehrfeld, W.; Kämper, K.-P.; Michel, F.; Schmidt, M.
JF  - 1994 IEEE Symposium on Emerging Technologies & Factory Automation : novel disciplines for the next century ; proceedings, November 6 - 10, 1994, Tokyo, Japan / ETFA '94. Hiroyuki Fujita [chairman] ... Sponsored by: Institute of Industrial Science, SEIKEN
Y1  - 1994
SN  - 0780321146
SP  - 43
EP  - 47
CY  - Piscataway, N.J.
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Pappas, D. P.
A1  - Hopster, H.
T1  - Reversible transition between perpendicular and in-plane magnetization in ultrathin films. Pappas, D. P.; Kämper, K.-P.; Hopster, H.
JF  - Physical Review Letters. 64 (1990), H. 26
Y1  - 1990
SN  - 1079-7114
SP  - 3179
EP  - 3182
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Pappas, D. P.
A1  - Miller, B. P.
A1  - Hopster, H.
T1  - Spin-dependent electron attenuation by transmission through thin ferromagnetic films . Pappas, D. P.; Kämper,K.-P.; Miller, B. P.; Hopster, H.; Fowler, D. E.; Brundle, C. R.; Luntz, A. C.; Shen, Z.-X.
JF  - Physical Review Letters. 66 (1991), H. 4
Y1  - 1991
SN  - 1079-7114
SP  - 504
EP  - 507
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Pappas, D. P.
A1  - Miller, B. P.
A1  - Hopster, H.
T1  - Magnetism of ultrathin films of Fe on Cu(100). Pappas, D. P; Kämper, K.-P.; Miller, B. P.; Hopster, H.; Fowler, D. E.; Luntz, A. C.; Brundle, C.R.; Shen, Z.-X.
JF  - Journal of Applied Physics. 69 (1991), H. 8
Y1  - 1991
SN  - 1089-7550
SP  - 5209
EP  - 521
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Picard, A.
A1  - Schütze, A.
A1  - Wallach, D.
T1  - Adopting the Foundry Concept of Semiconductor Fabrication on Educational Schemes and the Virtual Technology Lab (VTL). Picard, A.; Kämper, K.-P.; Schütze, A.; Wallach, D.; Walter, T.
JF  - Mst-News (2006)
Y1  - 2006
SN  - 0948-3128
SP  - 15, 16
EP  - u. 35
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Picard, Antoni
A1  - Brill, Manfred
A1  - Cassel, Detlef (u.a.)
T1  - The Virtual Cleanroom – a new tool in teaching MST process technologies
JF  - mst news International newsletter on micro - nano Integration (2003)
Y1  - 2003
SN  - 0948-3128
SP  - 35
EP  - 36
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Picard, Antoni
A1  - Brill, Manfred
A1  - Cassel, Detlev
A1  - Jentsch, Andreas
A1  - Merten, Sabine
A1  - Rollwa, Markus
T1  - The Virtual Clean Room - a new tool in teaching MST process technologies
N2  - The Virtual Clean Room - a new tool in teaching MST process technologies University education in high-technology fields like MST is not complete without intensive laboratory sessions. Students cannot fully grasp the complexity and the special problems related to the manufacturing of microsystems without a thorough hands-on experience in a MST clean room.
KW  - Virtuelle Maschine
KW  - VM
KW  - Mikrosystemtechnik
KW  - MST
KW  - virtual clean room
Y1  - 2003
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Güntherodt, G.
T1  - The influence of adsorbates on the spin-resolved photoemission of Ni(110). Schmitt, W.; Kämper, K.-P.; Güntherodt, G.
JF  - Surface Science. 189/190 (1987)
Y1  - 1987
SN  - 0039-6028
N1  - Proceedings of the Ninth European Conference on Surface Science
SP  - 741
EP  - 507
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Güntherodt, G.
T1  - Effect of adsorbates on the spin-polarized photoemission of itinerant ferromagnets. Schmitt, W.; Kämper, K.-P.; Güntherodt, G.
JF  - Physical Review B. 36 (1987), H. 7
Y1  - 1987
SN  - 1095-3795
SP  - 3763
EP  - 3768
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Güntherodt, G.
T1  - Thickness dependence of the electronic structure of ultrathin, epitaxial Ni(111)/W(110) layers.
JF  - Physical Review B. 38 (1988), H. 14
Y1  - 1988
SN  - 1095-3795
SP  - 9451
EP  - 9456
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Güntherodt, G.
T1  - Temperature and wave-vector dependence of the spin-split band structure of Ni(111) along the &#915;-L line
JF  - Physical Review B. 42 (1990), H. 16
Y1  - 1990
SN  - 1095-3795
SP  - 10696
EP  - 10705
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Güntherodt, G.
T1  - Temperature dependence of the exchange splitting of Ni along the &#61511;-L line
JF  - Journal de physique. 49 (1988), H. 12. Supplement, Colloque C8
Y1  - 1988
N1  - Proceedings of the International conference on Magnetism. Part 1. ICM 88, Paris, France, Juli 25-29, 1988
SP  - 39
EP  - 40
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Güntherodt, G.
A1  - Gambino, R. J.
T1  - CrO2—A New Half-Metallic Ferromagnet? Kämper, K.-P.; Schmitt, W.; Güntherodt, G.; Gambino, R. J., Ruf, R.
JF  - Physical Review Letters. 59 (1987), H. 24
Y1  - 1987
SN  - 1079-7114
SP  - 2788
EP  - 2791
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Wesner, D. A.
A1  - Güntherodt, G.
T1  - Thickness dependence of the spin- and angle-resolved photoemission of ultrathin, epitaxial Ni(111)/W(110) layers
JF  - Applied Physics A: Materials Science and Processing. 49 (1989), H. 6
Y1  - 1989
SN  - 1432-0630
SP  - 573
EP  - 578
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schulz, C.
A1  - Ehrfeld, W.
A1  - Erbel, R.
T1  - LIGA Fabricated Microsystems for Medical and Related Applications. Schulz, C.; Ehrfeld, W.; Erbel, R.; Kämper, K.-P.; Koch, L.; Lehr, H.; Roth, T.
JF  - 3-Day Course on Microengineering in Medicine and Biology and its Applications to Minimally Invasive Techniques for Therapy and Medical Diagnosis : EURO-BME 94; October 5, 6, and 7, 1994, Swiss Federal Institute of Technology, EPFL, Lausanne, Switzerland / [the 1994 EURO-BME Microengineering in Medicine and Biology Training Course. Staff: Christian D. Depeursinge ...]
Y1  - 1994
N1  - Microengineering in Medicine and Biology Training Course 1994, Lausanne
PB  - REPRO EPFL
CY  - Lausanne
ER  - 
TY  - JOUR
A1  - Leidinger, Rafael
A1  - Noisten, Thomas
A1  - Wollert, Jörg
T1  - Realtime automation networks in moVing industrial environments
JF  - Journal of systemics, cybernetics and informatics
N2  - The radio-based wireless data communication has made the realization of new technical solutions possible in many fields of the automation technology (AT). For about ten years, a constant disproportionate growth of wireless technologies can be observed in the automation technology.
However, it shows that especially for the AT, conventional technologies of office automation are unsuitable and/or not manageable. The employment of mobile services in the industrial automation technology has the potential of significant cost and time savings. This leads to an increased productivity in various fields of the AT, for example in the factory and process automation or in production logistics. In this paper technologies and solutions for an automation-suited supply of mobile wireless services will be introduced under the criteria of real time suitability, IT-security and service orientation.
Emphasis will be put on the investigation and development of wireless convergence layers for different radio technologies, on the central provision of support services for an easy-to-use, central, backup enabled management of combined wired / wireless networks and on the study on integrability in a Profinet real-time Ethernet network.
KW  - PROFINET
KW  - Distributed Control Systems,
KW  - Industrial Automation Technology,
KW  - 802.15.4
KW  - Bluetooth
KW  - Wireless Networks
Y1  - 2012
SN  - 1690-4532
VL  - Vol. 10
IS  - Iss. 2
SP  - 52
EP  - 56
PB  - IIIC
CY  - Orlando
ER  - 
TY  - JOUR
A1  - Luft, Angela
A1  - Bremen, Sebastian
A1  - Luft, Nils
T1  - A cost/benefit and flexibility evaluation framework for additive technologies in strategic factory planning
JF  - Processes
N2  - There is a growing demand for more flexibility in manufacturing to counter the volatility and unpredictability of the markets and provide more individualization for customers. However, the design and implementation of flexibility within manufacturing systems are costly and only economically viable if applicable to actual demand fluctuations. To this end, companies are considering additive manufacturing (AM) to make production more flexible. This paper develops a conceptual model for the impact quantification of AM on volume and mix flexibility within production systems in the early stages of the factory-planning process. Together with the model, an application guideline is presented to help planners with the flexibility quantification and the factory design process. Following the development of the model and guideline, a case study is presented to indicate the potential impact additive technologies can have on manufacturing flexibility Within the case study, various scenarios with different production system configurations and production programs are analyzed, and the impact of the additive technologies on volume and mix flexibility is calculated. This work will allow factory planners to determine the potential impacts of AM on manufacturing flexibility in an early planning stage and design their production systems accordingly.
KW  - additive manufacturing
KW  - factory planning
KW  - manufacturing flexibility
KW  - volume flexibility
KW  - mix flexibility
Y1  - 2023
U6  - http://dx.doi.org/10.3390/pr11071968
SN  - 2227-9717
VL  - 11
IS  - 7
PB  - MDPI
CY  - Basel
ER  -