TY  - GEN
A1  - Graf, Alain-Michel
A1  - Steinhof, Rafael
A1  - Lotz, Martin
A1  - Tippkötter, Nils
A1  - Kasper, Cornelia
A1  - Beutel, Sascha
A1  - Ulber, Roland
T1  - Downstream-Processing mit Membranadsorbern zur Isolierung nativer Proteinfraktionen aus Kartoffelfruchtwasser
T2  - Chemie Ingenieur Technik
N2  - Bei der Stärkeproduktion entstehendes Kartoffelfruchtwasser besitzt mit 2 – 3 % einen hohen Anteil an ernährungsphysiologisch interessanten Proteinen. Die industrielle Gewinnung dieser Proteinfracht liefert jedoch lediglich ein minderwertiges, denaturiertes Produkt. Mit Hilfe der Membranadsorber-Technologie lassen sich aus Kartoffelfruchtwasser unter milden Reaktionsbedingungen native bioaktive Proteinfraktionen gewinnen. Geeignete Trennbedingungen wurden im Labormaßstab entwickelt und in den Technikumsmaßstab übertragen. An Anionenaustauscher-Membranadsorbern mit einer Membranfläche von 10 000 cm2 wurde eine Patatinhaltige Fraktion (44 kDa) mit Bindungskapazitäten von 0,37 mg/cm2 isoliert. Eine niedermolekulare Proteinfraktion mit Protease-Inhibitoren konnte durch Kationenaustauscher-Membranadsorber mit Bindungskapazitäten von 1,00 mg/cm2 gewonnen werden. Sie ist für verschiedenste Applikationen in der pharmazeutischen, kosmetischen und der Nahrungsmittelindustrie interessant z. B. für Appetitzügler oder muskelaufbauende Proteinpräparate. Der Aufreinigung der nativen Proteinfraktionen durch Ultra-/Diafiltration schließt sich die Konfektionierung durch Sprühtrocknung an. Die bioanalytische Charakterisierung der Produkte belegt die Reinheit und die enzymatische Aktivität sowie die Abreicherung von Störkomponenten wie Glykoalkaloide und Polyphenoloxidasen.
Y1  - 2009
U6  - https://doi.org/10.1002/cite.200800139
VL  - 81
IS  - 3
SP  - 267
EP  - 274
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Iken, Heiko
A1  - Bronder, Thomas
A1  - Goretzki, Alexander
A1  - Kriesel, Jana
A1  - Ahlborn, Kristina
A1  - Gerlach, Frank
A1  - Vonau, Winfried
A1  - Zander, Willi
A1  - Schubert, Jürgen
A1  - Schöning, Michael Josef
T1  - Development of a Combined pH- and Redox-Sensitive Bi-Electrode Glass Thin-Film Sensor
JF  - physica status solidi a : applications and materials sciences
Y1  - 2019
U6  - https://doi.org/10.1002/pssa.201900114
SN  - 1862-6319
VL  - 216
IS  - 12
SP  - 1
EP  - 8
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Engel, Mareike
A1  - Gemünde, Andre
A1  - Holtmann, Dirk
A1  - Müller-Renno, Christine
A1  - Ziegler, Christiane
A1  - Tippkötter, Nils
A1  - Ulber, Roland
T1  - Clostridium acetobutylicum’s connecting world: cell appendage formation in bioelectrochemical systems
JF  - ChemElectroChem
N2  - Bacterial cell appendix formation supports cell-cell interaction, cell adhesion and cell movement. Additionally, in bioelectrochemical systems (BES), cell appendages have been shown to participate in extracellular electron transfer. In this work, the cell appendix formation of Clostridium acetobutylicum in biofilms of a BES are imaged and compared with conventional biofilms. Under all observed conditions, the cells possess filamentous appendages with a higher number and density in the BES. Differences in the amount of extracellular polymeric substance in the biofilms of the electrodes lead to the conclusion that the cathode can be used as electron donor and the anode as electron acceptor by C. acetobutylicum. When using conductive atomic force microscopy, a current response of about 15 nA is found for the cell appendages from the BES. This is the first report of conductivity for clostridial cell appendices and represents the basis for further studies on their role for biofilm formation and electron transfer.
Y1  - 2019
U6  - https://doi.org/10.1002/celc.201901656
SN  - 2196-0216
VL  - 7
IS  - 2
SP  - 414
EP  - 420
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Tippkötter, Nils
A1  - Roikaew, Wipa
A1  - Ulber, Roland
A1  - Hoffmann, Alexander
A1  - Denzler, Hans-Jörg
A1  - Buchholz, Heinrich
T1  - Paracoccus denitrificans for the effluent recycling during continuous denitrification of liquid food
JF  - Biotechnology Progress
N2  - Nitrate is an undesirable component of several foods. A typical case of contamination with high nitrate contents is whey concentrate, containing nitrate in concentrations up to 25 l. The microbiological removal of nitrate by Paracoccus denitrificans under formation of harmless nitrogen in combination with a cell retention reactor is described here. Focus lies on the resource-conserving design of a microbal denitrification process. Two methods are compared. The application of polyvinyl alcohol-immobilized cells, which can be applied several times in whey feed, is compared with the implementation of a two step denitrification system. First, the whey concentrate's nitrate is removed by ion exchange and subsequently the eluent regenerated by microorganisms under their retention by crossflow filtration. Nitrite and nitrate concentrations were determined by reflectometric color measurement with a commercially available Reflectoquant® device. Correction factors for these media had to be determined. During the pilot development, bioreactors from 4 to 250 mg·L-1 and crossflow units with membrane areas from 0.02 to 0.80 m2 were examined. Based on the results of the pilot plants, a scaling for the exemplary process of denitrifying 1,000 tons per day is discussed.
Y1  - 2010
U6  - https://doi.org/10.1002/btpr.384
SN  - 8756-7938
VL  - 26
IS  - 3
SP  - 756
EP  - 762
PB  - Wiley
CY  - Hoboken, NJ
ER  - 
TY  - JOUR
A1  - Voigt, Birgit
A1  - Albrecht, Dirk
A1  - Sievers, Susanne
A1  - Becher, Dörte
A1  - Bongaerts, Johannes
A1  - Evers, Stefan
A1  - Schweder, Thomas
A1  - Maurer, Karl-Heinz
A1  - Hecker, Michael
T1  - High-resolution proteome maps of Bacillus licheniformis cells growing in minimal medium
JF  - Proteomics
Y1  - 2015
U6  - https://doi.org/10.1002/pmic.201400504
SN  - 1615-9861
VL  - 15
IS  - 15
SP  - 2629
EP  - 2633
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Colombo, Daniele
A1  - Drira, Slah
A1  - Frotscher, Ralf
A1  - Staat, Manfred
T1  - An element-based formulation for ES-FEM and FS-FEM models for implementation in standard solid mechanics finite element codes for 2D and 3D static analysis
JF  - International Journal for Numerical Methods in Engineering
N2  - Edge-based and face-based smoothed finite element methods (ES-FEM and FS-FEM, respectively) are modified versions of the finite element method allowing to achieve more accurate results and to reduce sensitivity to mesh distortion, at least for linear elements. These properties make the two methods very attractive. However, their implementation in a standard finite element code is nontrivial because it requires heavy and extensive modifications to the code architecture. In this article, we present an element-based formulation of ES-FEM and FS-FEM methods allowing to implement the two methods in a standard finite element code with no modifications to its architecture. Moreover, the element-based formulation permits to easily manage any type of element, especially in 3D models where, to the best of the authors' knowledge, only tetrahedral elements are used in FS-FEM applications found in the literature. Shape functions for non-simplex 3D elements are proposed in order to apply FS-FEM to any standard finite element.
KW  - distorted element
KW  - ES-FEM
KW  - FS-FEM
KW  - non-simplex S-FEM elements
KW  - S-FEM
Y1  - 2022
U6  - https://doi.org/10.1002/nme.7126
SN  - 1097-0207
VL  - 124
IS  - 2
SP  - 402
EP  - 433
PB  - Wiley
CY  - Chichester
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Trenz, Eva
A1  - Lohmann, Philipp
A1  - Frotscher, Ralf
A1  - Klinge, Uwe
A1  - Tabaza, Ruth
A1  - Kirschner-Hermanns, Ruth
T1  - New measurements to compare soft tissue anchoring systems in pelvic floor surgery
JF  - Journal of Biomedical Materials Research Part B: Applied Biomaterials
N2  - Suburethral slings as well as different meshes are widely used treating stress urinary incontinence and prolaps in women. With the development of MiniSlings and special meshes using less alloplastic material anchorage systems become more important to keep devices in place and to put some tension especially on the MiniSlings. To date, there are many different systems of MiniSlings of different companies on the market which differ in the structure of the used meshes and anchors. A new objective measurement method to compare different properties of MiniSling systems (mesh and anchor) is presented in this article. Ballistic gelatine acts as soft tissue surrogate. Significant differences in parameters like pull-out strength of anchors or shrinkage of meshes under loading conditions have been determined. The form and size of the anchors as well as the structural stability of the meshes are decisive for a proper integration. The tested anchorings sytems showed markedly different mechanical function at their respective load bearing capacity. As the stable fixation of the device in tissue is a prerequisite for a permanet reinforcement, the proposed test system permits further optimisation of anchor and mesh devices to improve the success of the surgical treatment
Y1  - 2012
U6  - https://doi.org/10.1002/jbm.b.32654
SN  - 1552-4981
VL  - 100B
IS  - 4
SP  - 924
EP  - 933
PB  - Wiley
CY  - Hoboken, NJ
ER  - 
TY  - JOUR
A1  - Erpicum, Sebastien
A1  - Crookston, Brian M.
A1  - Bombardelli, Fabian
A1  - Bung, Daniel Bernhard
A1  - Felder, Stefan
A1  - Mulligan, Sean
A1  - Oertel, Mario
A1  - Palermo, Michele
T1  - Hydraulic structures engineering: An evolving science in a changing world
JF  - Wires Water
Y1  - 2021
U6  - https://doi.org/10.1002/wat2.1505
SN  - 2049-1948
VL  - 8
IS  - 2
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Nguyen-Xuan, H.
A1  - Rabczuk, T.
A1  - Nguyen-Thoi, T.
A1  - Tran, Thanh Ngoc
A1  - Nguyen-Thanh, N.
T1  - Computation of limit and shakedown loads using a node-based smoothed finite element method
JF  - International Journal for Numerical Methods in Engineering
N2  - This paper presents a novel numerical procedure for computing limit and shakedown loads of structures using a node-based smoothed FEM in combination with a primal–dual algorithm. An associated primal–dual form based on the von Mises yield criterion is adopted. The primal-dual algorithm together with a Newton-like iteration are then used to solve this associated primal–dual form to determine simultaneously both approximate upper and quasi-lower bounds of the plastic collapse limit and the shakedown limit. The present formulation uses only linear approximations and its implementation into finite element programs is quite simple. Several numerical examples are given to show the reliability, accuracy, and generality of the present formulation compared with other available methods.
Y1  - 2011
U6  - https://doi.org/10.1002/nme.3317
SN  - 1097-0207
VL  - 90
IS  - 3
SP  - 287
EP  - 310
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Blanke, Tobias
A1  - Reger, Vitali
A1  - Döring, Bernd
A1  - Göttsche, Joachim
A1  - Kuhnhenne, Markus
T1  - Koaxiale Stahlenergiepfähle
JF  - Stahlbau
N2  - Ein entscheidender Teil der Energiewende ist die Wärmewende im Gebäudesektor. Ein Schlüsselelement sind hier Wärmepumpen. Diese benötigen eine Wärmequelle, der sie Energie entziehen können, um sie auf ein höheres Temperaturniveau zu transformieren. Diese Wärmequelle kann bspw. das Erdreich sein, dessen Wärme durch Erdsonden erschlossen werden kann. In diesem Beitrag werden in Stahlpfähle integrierte Koaxialsonden mit dem Stand der Technik von Erdsonden gleichen Durchmessers bezüglich ihrer thermischen Leistungsmerkmale verglichen. Die Stahlenergiepfähle bieten neben der Wärmegewinnung weitere Vorteile, da sie auch eine statische Funktion übernehmen und rückstandsfrei zurückgebaut werden können. Es werden analytische und numerische Berechnungen vorgestellt, um die thermischen Potenziale beider Systeme zu vergleichen. Außerdem wird ein Testaufbau gezeigt, bei dem Stahlenergiepfähle in zwei verschiedenen Längen mit vorhandenen gängigen Erdsonden verglichen werden können. Die Berechnungen zeigen einen deutlichen thermischen Mehrertrag zwischen 26 % und 148 % der Stahlenergiepfähle gegenüber dem Stand der Technik abhängig vom Erdreich. Die Messergebnisse zeigen einen thermischen Mehrertrag von über 100 %. Es lässt sich also signifikante Erdsondenlänge einsparen. Dabei ist zu beachten, dass sich damit der thermisch genutzte Bereich des Erdreichs reduziert, wodurch die thermische Regeneration und/oder das Langzeitverhalten des Erdreichs an Bedeutung gewinnt.
Y1  - 2021
VL  - 90. 2021
IS  - 6
SP  - 417
EP  - 424
PB  - Wiley
CY  - Weinheim
ER  -