TY  - CHAP
A1  - Bragard, Michael
A1  - Ronge, C.
A1  - De Doncker, R. W.
T1  - Sandwich design of high-power thyristor based devices with integrated MOSFET structure
T2  - Proceedings of the 2011 - 14th - European Conference on Power Electronics and Applications (EPE 2011) : Aug. 30, 2011 - Sept. 1, 2011, Birmingham, United Kingdom
Y1  - 2011
SN  - 978-1-61284-167-0 (Print)
SN  - 978-90-75815-15-3 (Online)
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Gottschlich, J.
A1  - De Doncker, R. W.
T1  - Design and realization of a credit card size driver stage for high power thyristor based devices with integrated MOS structure
T2  - 2011 IEEE 8th International Conference on Power Electronics and ECCE Asia (ICPE & ECCE 2011) : Jeju, South Korea, 30 May 2011 - 3 June 2011 / [co-sponsored by the Korean Institute of Power Electronics ...]
Y1  - 2011
SN  - 978-1-61284-958-4 (Print)
SN  - 978-1-61284-956-0 (Online)
U6  - http://dx.doi.org/10.1109/ICPE.2011.5944661
SP  - 1182
EP  - 1189
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Magnor, D.
A1  - Soltau, N.
A1  - Bragard, Michael
A1  - Schmiegel, A.
A1  - De Doncker, R. W.
A1  - Sauer, D. U.
ED  - de Santi, Giovanni Frederigo
T1  - Analysis of the model dynamics for the battery and battery converter in a grid-connected 5 kW photovoltaic system
T2  - Proceedings / 25th European Photovoltaic Solar Energy Conference and Exhibition ; 5th World Conference on Photovoltaic Energy Conversion ; Feria Valencia, Convention & Exhibition Centre, Valencia, Spain, conference 6 - 10 September 2010, exhibition 6 - 9 September 2010 ; Joint World Conference of: 25th European Photovoltic Solar Energy Conference and Exhibition, 36th US IEEE Photovoltaic Specialists Conference, 20th Asia/Pacific PV Science and Engineering Conference
Y1  - 2010
SN  - 3-936338-26-4  (DVD-ROM)
N1  - EU PVSEC WCPEC
PB  - WIP Renewable Energies
CY  - [München]
ER  - 
TY  - CHAP
A1  - Nötzold, K.
A1  - Uphues, A.
A1  - Wegener, R.
A1  - Fink, K.
A1  - Bragard, Michael
A1  - Griessel, R.
A1  - Soter, S.
T1  - Inverter based test setup for LVRT verification of a full-scale 2 MW wind power converter
T2  - 15th European Conference on Power Electronics and Applications (EPE), 2013 : 2 - 6 Sept. 2013, Lille, France / [EPE Association; PELS, IEEE Power Electronics Society]
Y1  - 2013
SN  - 978-1-4799-0115-9 (Online-Ausg.)
U6  - http://dx.doi.org/10.1109/EPE.2013.6634752
SP  - 1037
EP  - 1042
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Nötzold, K.
A1  - Uphues, A.
A1  - Wegener, R.
A1  - Soter, S.
A1  - Fink, K.
A1  - Bragard, Michael
A1  - Griessel, R.
T1  - Inverter based test setup for LVRT verification of a full-scale 2 MW wind power converter
T2  - EPE Joint Wind Energy and T&D Chapters Seminar : 28th and 29th of June 2012, in the Utzon Centre, Aalborg, Denmark ; papers, posters, presentations. - Session 2: Grid connection, compliance
Y1  - 2012
PB  - EPE Association
CY  - Brussels
ER  - 
TY  - CHAP
A1  - Köllensperger, P.
A1  - Bragard, Michael
A1  - Plum, T.
A1  - De Doncker, R. W.
T1  - The dual GCT : a new high-power device using optimized GCT technology
T2  - Conference record of the 2007 IEEE Industry Applications Conference : 42. IAS annual meeting ; September 23 - 27, 2007, New Orleans, Louisiana, USA
Y1  - 2007
SN  - 978-1-4244-1260-0 (Online)
SN  - 978-1-4244-1259-4 (Print)
U6  - http://dx.doi.org/10.1109/07IAS.2007.76
SP  - 358
EP  - 365
PB  - IEEE Operations Center
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Soltau, N.
A1  - De Doncker, R. W.
A1  - Schmiegel, A.
T1  - Design and implementation of a 5 kW photovoltaic system with li-ion battery and additional DC-DC converter
T2  - 2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]
Y1  - 2010
SN  - 978-1-4244-5286-6 (Print)
SN  - 978-1-4244-5287-3 (Online)
U6  - http://dx.doi.org/10.1109/ECCE.2010.5618220
SP  - 2944
EP  - 2949
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Conrad, M.
A1  - De Doncker, R. W.
T1  - The integrated emitter turn-off thyristor (IETO) : an innovative thyristor based high power semiconductor device using MOS assisted turn-off
T2  - 2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]
Y1  - 2010
SN  - 978-1-4244-5286-6 (Print)
SN  - 978-1-4244-5287-3 (Online)
U6  - http://dx.doi.org/10.1109/ECCE.2010.5618410
SP  - 4551
EP  - 4557
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Näther, Niko
A1  - Poghossian, Arshak
A1  - Platen, J.
A1  - Yoshinobu, T.
A1  - Koudelka-Hep, M.
A1  - Schöning, Michael Josef
T1  - Multi-parameter sensing of both physical and (bio-)chemical quantities using the same transducer principle
T2  - Biochemical sensing utilisation of micro- and nanotechnologies : Warsaw, [23rd - 26th] November 2005 / ed. by M. Mascini ...
Y1  - 2006
SP  - 172
EP  - 181
CY  - Warsaw
ER  - 
TY  - CHAP
A1  - Kloock, Joachim P.
A1  - Schubert, J.
A1  - Ermelenko, Y.
A1  - Vlasov, Y. G.
A1  - Bratov, A.
A1  - Schöning, Michael Josef
T1  - Thin-film sensors with chalcogenide glass materials – a general survey
T2  - Biochemical sensing utilisation of micro- and nanotechnologies : Warsaw, [23rd - 26th] November 2005 / ed. by M. Mascini ...
Y1  - 2006
SP  - 92
EP  - 97
CY  - Warsaw
ER  - 
TY  - CHAP
A1  - Beging, Stefan
A1  - Poghossian, Arshak
A1  - Mlynek, D.
A1  - Hataihimakul, S.
A1  - Pedraza, A.
A1  - Dhawan, S.
A1  - Laube, N.
A1  - Kleinen, L.
A1  - Baldsiefen, G.
A1  - Busch, H.
A1  - Schöning, Michael Josef
T1  - Ion-selective sensors for the determination of the risk of urinary stone formation
T2  - Micro- and Nanosystems in biochemical diagnosis : Principles and applications
Y1  - 2010
SP  - 74
EP  - 80
CY  - Warsaw
ER  - 
TY  - CHAP
A1  - Plescher, Engelbert
A1  - Mathiak, Gerhard
A1  - Willnecker, Rainer
T1  - Technical aspects of liquid diffusion model experiments
T2  - 55th International Astronautical Congress : October 4 - 8, 2004, Vancouver, Canada / International Astronautical Federation. Bd. 8. IAC-04-J.5.04
Y1  - 2005
SP  - 5019
EP  - 5025
PB  - International Astronautical Federation
CY  - Paris
ER  - 
TY  - CHAP
A1  - Neumann, Tobias
A1  - Ferrein, Alexander
A1  - Kallweit, Stephan
A1  - Scholl, Ingrid
T1  - Towards a mobile mapping robot for underground mines
T2  - 7th Conference of Robotics and Mechatronics : RobMech 2014 : 27th and 28th Nov. 2014, Cape Town
Y1  - 2014
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Wagner, Torsten
A1  - Yoshinobu, T.
A1  - Schöning, Michael Josef
T1  - Light-addressable potentiometric sensor as semiconductor-based sensor platform for (bio-) chemical sensing
T2  - Armenian Journal of Physics
Y1  - 2008
SN  - 1829-1171
SP  - 99
EP  - 103
ER  - 
TY  - CHAP
A1  - Weil, M.
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Cherstvy, A.
T1  - Electrical monitoring of layer-by-layer adsorption of oppositely charged macromolecules by means of capacitive field-effect devices
Y1  - 2012
SN  - 978-3-9813484-2-2
U6  - http://dx.doi.org/10.5162/IMCS2012/P2.5.2
SP  - 1575
EP  - 1578
ER  - 
TY  - CHAP
A1  - Bohrn, Ulrich
A1  - Mucha, Andreas
A1  - Werner, Frederik
A1  - Stütz, Evamaria
A1  - Bäcker, Matthias
A1  - Krumbe, Christoph
A1  - Schienle, Meinrad
A1  - Fleischer, Maximilian
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Detection of toxic chromium species in water using cellbased sensor systems
Y1  - 2012
SN  - 978-3-9813484-2-2
U6  - http://dx.doi.org/10.5162/IMCS2012/P2.1.14
SP  - 1364
EP  - 1367
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Jewelry fabrication via selective laser melting of glass
T2  - ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications
N2  - Selective Laser Melting (SLM) is one of the Additive Manufacturing (AM) technologies applicable for producing complex geometries which are typically expensive or difficult to fabricate using conventional methods. This process has been extensively investigated experimentally for various metals and the fabrication process parameters have been established for different applications; however, fabricating 3D glass objects using SLM technology has remained a challenge so far although it could have many applications. This paper presents a summery on various experimental evaluations of a material database incorporating the build parameters of glass powder using the SLM process for jewelry applications.
Y1  - 2014
SN  - 978-0-7918-4583-7
U6  - http://dx.doi.org/10.1115/ESDA2014-20380
SP  - V001T06A005
ER  - 
TY  - CHAP
A1  - Schöning, Michael Josef
A1  - Abouzar, Maryam H.
A1  - Wagner, Torsten
A1  - Näther, Niko
A1  - Rolka, David
A1  - Yoshinobu, Tatsuo
A1  - Kloock, Joachim P.
A1  - Turek, Monika
A1  - Ingebrandt, Sven
A1  - Poghossian, Arshak
T1  - A semiconductor-based field-effect platform for (bio-)chemical and physical sensors: From capacitive EIS sensors and LAPS over ISFETs to nano-scale devices
T2  - MRS Proceedings
Y1  - 2006
U6  - http://dx.doi.org/10.1557/PROC-0952-F08-02
N1  - Vol. 952 - Symposium F - Integrated Nanosensors
SP  - 1
EP  - 9
ER  - 
TY  - CHAP
A1  - Moritz, Werner
A1  - Yoshinobu, Tatsuo
A1  - Finger, Friedhelm
A1  - Krause, Steffi
A1  - Schöning, Michael Josef
T1  - Amorphous silicon as semiconductor material for high resolution LAPS
T2  - Eurosensors XVII : the 17th European Conference on Solid-State Transducers ; University of Minho, Guimarães, Portugal, September 21 - 24, 2003
Y1  - 2003
SP  - 48
EP  - 49
ER  - 
TY  - CHAP
A1  - Ermelenko, Y.
A1  - Yoshinobu, T.
A1  - Mourzina, Y.
A1  - Schöning, Michael Josef
A1  - Vlasov, Y.
A1  - Iwasaki, H.
T1  - A multisensor based on laser scanned silicon transducer (LSST): development and properties
T2  - Eurosensors XVII : the 17th European Conference on Solid-State Transducers ; University of Minho, Guimarães, Portugal, September 21 - 24, 2003
Y1  - 2003
SP  - 72
EP  - 73
ER  - 
TY  - CHAP
A1  - Yoshinobu, T.
A1  - Schöning, Michael Josef
A1  - Finger, F.
A1  - Moritz, W.
A1  - Iwasaki, H.
T1  - Thin-film a-Si LAPS : Preparation and pH sensitivity
T2  - Eurosensors XVII : the 17th European Conference on Solid-State Transducers ; University of Minho, Guimarães, Portugal, September 21 - 24, 2003
Y1  - 2003
SP  - 88
EP  - 89
ER  - 
TY  - CHAP
A1  - Bohrn, Ulrich
A1  - Stütz, Evamaria
A1  - Fleischer, Maximilian
A1  - Schöning, Michael Josef
A1  - Wagner, Patrick
T1  - Living cell-based gas sensor system for the detection of acetone in air
Y1  - 2012
SN  - 978-3-9813484-2-2
U6  - http://dx.doi.org/10.5162/IMCS2012/3.2.3
SP  - 269
EP  - 272
ER  - 
TY  - CHAP
A1  - Takenaga, Shoko
A1  - Werner, Frederik
A1  - Sawada, Kazuaki
A1  - Schöning, Michael Josef
T1  - Comparison of label-free ACh image sensors based on CCD and LAPS
Y1  - 2012
SN  - 978-3-9813484-2-2
U6  - http://dx.doi.org/10.5162/IMCS2012/4.2.6
SP  - 356
EP  - 359
ER  - 
TY  - CHAP
A1  - Gebhardt, Andreas
A1  - Ritz, Thomas
A1  - Siekmann, Kirsten
A1  - Wallenborn, Ramona
ED  - Demmer, Axel
T1  - Additive manufacturing businesses in the process chain of individualized mass products
T2  - DDMC 2014 : Proceedings of the Fraunhofer Direct Digital Manufacturing Conference
Y1  - 2014
SN  - 978-3-8396-9128-1 (E-Book)
PB  - Fraunhofer
CY  - Stuttgart
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
A1  - Izquierdo Tello, César
A1  - Damm, Sebastian
T1  - Connecting a pedelec to the cloud as basis for gamification in multi modal mobility planning
T2  - MobileCloud 2014 : 2nd IEEE International Conference on Mobile Cloud Computing, Services, and Engineering Oxford, United Kingdom 7-10 April 2014
Y1  - 2014
SN  - 978-1-4799-2504-9
U6  - http://dx.doi.org/10.1109/MobileCloud.2014.25
SP  - 101
EP  - 108
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Heuermann, Holger
A1  - Finger, Torsten
T1  - 2.45 GHz Plasma Powered Spark Plug by Thermal and EM-Optimization
Y1  - 2014
N1  - Ansys High Frequency Simulation Conference - AHFSC 2014, Munich; 02/2014
ER  - 
TY  - CHAP
A1  - Bonney, Gregor
A1  - Höfken, Hans-Wilhelm
A1  - Paffen, Benedikt
A1  - Schuba, Marko
T1  - ICS/SCADA Security - Analysis of a Beckhoff CX5020 PLC
T2  - 1st International Conference on Information Systems Security and Privacy : ICISSP 2015
Y1  - 2015
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Fuchs, Britta
A1  - Ritz, Thomas
A1  - Strauch, Jakob
ED  - Obaidat, Mohammad S.
T1  - Usability of mobile applications : dissemination of usability engineering in small and medium enterprises
T2  - Proceedings of the International Conference on Data Communication Networking, e-Business and Optical Communication Systems : Rome, Italy, 24 - 27 July, 2012 ; [integrated in the ICETE (International Conference on e-Business and Telecommunications)]
Y1  - 2012
SN  - 978-989-8565-23-5
N1  - Nebentitel: DCNET; ICE-B; OPTICS
SP  - 272
EP  - 277
PB  - SciTePress
CY  - [Lissabon]
ER  - 
TY  - CHAP
A1  - Damm, Sebastian
A1  - Ritz, Thomas
A1  - Strauch, Jakob
T1  - Adaption of archetype patterns for mobile cloud-based business apps
T2  - 2011 IEEE International Conference on Pervasive Computing and Communications workshops (PerCom workshops 2011) : Seattle, Washington, USA, 21 - 25 March 2011
Y1  - 2011
SN  - 978-1-61284-938-6 (Print)
SN  - 978-1-61284-936-2 (E-Book)
U6  - http://dx.doi.org/10.1109/PERCOMW.2011.5766849
SP  - 100
EP  - 105
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Fuchs, Britta
A1  - Ritz, Thomas
A1  - Halbach, Bastian
A1  - Hartl, Florian
ED  - Marca, David A.
T1  - Blended shopping : interactivity and individualization
T2  - Proceedings of the International Conference on e-Business : Seville, Spain, 18 - 21 July 2011 ; [... integrated in the ICETE (International Conference on e-Business and Telecommunications) joint conference]
Y1  - 2011
SN  - 978-989-8425-70-6
SP  - 47
EP  - 52
PB  - SciTePress
CY  - [Lissabon]
ER  - 
TY  - CHAP
A1  - Ellerweg, Roland
A1  - Ritz, Thomas
ED  - Roth, Jörg
T1  - Tool supported requirements analysis for the user centered development of mobile enterprise software
T2  - Proceeding of Wireless Applications and Computing 2008 and Telecommunications, Networks and Systems 2008 : MCCSIS '08 ; IADIS Multi Conference on Computer Science and Information Systems ; 22 - 24 July 2008, Amsterdam, The Netherlands
N2  - A user centered development method has proved satisfactory for the development of mobile enterprise software. To make use of this method, detailed information about the user and the place where the user interacts with his mobile device is required. This article describes how both can be modeled by a stereotypical and conceptual extended UML extension. Finally, a software tool is presented that supports the developed UML extension.
Y1  - 2008
SN  - 978-972-8924-62-1
SP  - 160
EP  - 162
PB  - IADIS Press
CY  - [Lisboa]
ER  - 
TY  - CHAP
A1  - Schopp, Christoph
A1  - Heuermann, Holger
T1  - Electrodeless low pressure lamp with bi-static matching at 2.45 GHz
T2  - 2013 European Microwave Conference (EuMC) , Nuremberg
Y1  - 2013
SN  - 978-1-4799-0264-4
SP  - 881
EP  - 884
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Schopp, Christoph
A1  - Heuermann, Holger
A1  - Holtrup, S.
T1  - Investigation on efficacy optimization of RF-driven automotive D-lamps
T2  - 44th European Microwave Conference (EuMC),2014, Rome
Y1  - 2014
U6  - http://dx.doi.org/10.1109/EuMC.2014.6986645
SP  - 1154
EP  - 1157
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Krichel, Frank
A1  - Müller, Klaus-Peter
T1  - Lightning protection design of a renewable energy hybrid-system without power mains connection
N2  - In the year 2000 a direct lightning strike to the hybridsystem without power mains connection VATALI on the Greek island Crete results in the destruction and damage of some mechanical and electrical components. The hybrid-system VATALI was not lightning protected at that time. The hardware damage costs are approx. 60,000 €. The exposed site of the hybrid-system on top of a mountain was and still is the reason for a high risk of lightning strikes. Also in the future further lightning strikes have to be taken into consideration. In the paper a fundamental lightning protection design concept for renewable energy hybrid-systems without power mains connection and protection measures against direct strikes and overvoltages are shown in detail. The design concept was realized exemplarily for the hybrid-system VATALI. The hardware costs for the protection measures were about 15,000 €. About 50% of the costs are due to protection measures against direct strikes, 50% are due to overvoltage protection. Future extensions, new installations, or modifications have to be included into the lightning protection design concept of the hybrid-system.
KW  - Blitzschutz
KW  - Erneuerbare Energien
KW  - Hybridsystem
KW  - Lightning protection
KW  - Renewable energy
KW  - hybrid-system
Y1  - 2001
ER  - 
TY  - CHAP
A1  - Zischank, Wolfgang J.
A1  - Kern, Alexander
A1  - Frentzel, Ralf
A1  - Heidler, Fridolin
A1  - Seevers, M.
T1  - Assessment of the lightning transient coupling to control cables interconnecting structures in large industrial facilities and power plants
N2  - Large industrial facilities and power plants often require a huge number fo information and control cables between the differnet structures. These I&C-cables can be routed in reinforced concrete cable ducts or in isolated buried cable runs. KTA 2206 is the German lightning protection standard for nuclear power plants. During the last several years considerable effort has been made to revise this standard. Despite the well established principles and design guidelines for the construction of the lightning protection system, this standard puts special emphasis on the coupling of transient overvoltages to I&C-cables.
KW  - Blitzschutz
KW  - Elektromagnetische Kopplung
KW  - Überspannung
KW  - Kraftwerke
KW  - Industrieanlagen
KW  - Lightning
KW  - current distribution
KW  - electromagnetic coupling
KW  - overvoltages
Y1  - 2000
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Schumacher, Kerstin
A1  - Kloock, Joachim P.
A1  - Rosenkranz, Christian
A1  - Schultze, Joachim W.
A1  - Müller-Veggian, Mattea
A1  - Schöning, Michael Josef
T1  - Functional testing and characterisation of ISFETs on wafer level by means of a micro-droplet cell
N2  - A wafer-level functionality testing and characterisation system for ISFETs (ionsensitive field-effect transistor) is realised by means of integration of a specifically designed capillary electrochemical micro-droplet cell into a commercial wafer prober-station. The developed system allows the identification and selection of “good” ISFETs at the earliest stage and to avoid expensive bonding, encapsulation and packaging processes for nonfunctioning ISFETs and thus, to decrease costs, which are wasted for bad dies. The developed system is also feasible for wafer-level characterisation of ISFETs in terms of sensitivity, hysteresis and response time. Additionally, the system might be also utilised for wafer-level testing of further electrochemical sensors.
KW  - Biosensor
KW  - Biosensorik
KW  - ISFET
KW  - Wafer
KW  - ISFET
KW  - wafer-level testing
KW  - capillary micro-droplet cell
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1259
ER  - 
TY  - CHAP
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Preface of the Special Issue of I3S 2005 in Jülich (Germany)
N2  - International Symposium on Sensor Science, I3S 2005 <3; 2005; Juelich, Germany> In: Sensors 2006, 6, 260-261 ISSN 1424-8220
KW  - Biosensor
KW  - I3S 2005
KW  - International Symposium on Sensor Science
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1365
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Heitzer, Michael
T1  - The restricted influence of kinematic hardening on shakedown loads
N2  - Structural design analyses are conducted with the aim of verifying the exclusion of ratcheting. To this end it is important to make a clear distinction between the shakedown range and the ratcheting range. In cyclic plasticity more sophisticated hardening models have been suggested in order to model the strain evolution observed in ratcheting experiments. The hardening models used in shakedown analysis are comparatively simple. It is shown that shakedown analysis can make quite stable predictions of admissible load ranges despite the simplicity of the underlying hardening models. A linear and a nonlinear kinematic hardening model of two-surface plasticity are compared in material shakedown analysis. Both give identical or similar shakedown ranges. Structural shakedown analyses show that the loading may have a more pronounced effect than the hardening model.
KW  - Biomedizinische Technik
KW  - Einspielen <Werkstoff>
KW  - Shakedown
KW  - Ratcheting
KW  - Bruchmechanik
KW  - shakedown
KW  - material shakedown
KW  - linear kinematic hardening
KW  - nonlinear kinematic hardening
KW  - ratchetting
Y1  - 2002
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Heitzer, Michael
T1  - Direct static FEM approach to limit and shakedown analysis
N2  - Safety and reliability of structures may be assessed indirectly by stress distributions. Limit and shakedown theorems are simplified but exact methods of plasticity that provide safety factors directly in the loading space. These theorems may be used for a direct definition of the limit state function for failure by plastic collapse or by inadaptation. In a FEM formulation the limit state function is obtained from a nonlinear optimization problem. This direct approach reduces considerably the necessary knowledge of uncertain technological input data, the computing time, and the numerical error. Moreover, the direct way leads to highly effective and precise reliability analyses. The theorems are implemented into a general purpose FEM program in a way capable of large-scale analysis.
KW  - Einspielen <Werkstoff>
KW  - Nichtlineare Optimierung
KW  - Shakedown
KW  - Shakedown
KW  - limit load
KW  - lower bound theorem
KW  - nonlinear optimization
KW  - reliability
Y1  - 2000
ER  - 
TY  - CHAP
A1  - Staat, Manfred
T1  - Design by Analysis of Pressure Components by non-linear Optimization
N2  - This paper presents the direct route to Design by Analysis (DBA) of the new European pressure vessel standard in the language of limit and shakedown analysis (LISA). This approach leads to an optimization problem. Its solution with Finite Element Analysis is demonstrated for some examples from the DBA-Manual. One observation from the examples is, that the optimisation approach gives reliable and close lower bound solutions leading to simple and optimised design decision.
KW  - Analytischer Zulaessigkeitsnachweis
KW  - FEM
KW  - Einspiel-Analyse
KW  - design-by-analysis
KW  - finite element analysis
KW  - limit and shakedown analysis
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Fabo, Sabine
T1  - Audio-visual hybrids : between immersion and detachment
N2  - Close interrelations between sound and image are not a mere phenomenon of today’s multimedia technology. The idea of the synthesis of different media lies at the core of the concept of the Gesamtkunstwerk in the second half of the 19th century and it can also be traced back to the synaesthesia debate at the beginning of the 20th century [...].
KW  - Elektronische Kunst
KW  - Klangkunst
KW  - Hybride Kunst
KW  - Medienkunst
KW  - Hybrid Art
KW  - Sound Art
KW  - Audio-visual Art
Y1  - 2004
ER  - 
TY  - CHAP
A1  - Surtees, A. J.
A1  - Gillespie, A.
A1  - Kern, Alexander
A1  - Rousseau, A.
T1  - DEVELOPMENT OF A RISK ASSESSMENT CALCULATOR BASED ON A SIMPLIFIED FORM OF THE IEC 62305-2 STANDARD ON LIGHTNING PROTECTION
N2  - Neue Blitzschutznorm IEC 62305. Entwicklung einer einfachen Software zur Risikoabwägung
N2  - IEC Technical Committee 81 is currently creating the new IEC 62305 series of standards on Lightning Protection. Working Group 9 is responsible for Part 2 of this series, which deals with the assessment and management of risk its CDV (Committee Draft for Voting) stage and has been circulated to National Committees for comment. The paper details the development of the Simplified IEC Risk Assessment Calculator software tool as described in Informative Annex J of IEC62305-2 Ed.1/CDV 2. This tool is intended as a simplified implementation of the more rigorous treatment of risk management found in the written document. It is designed to be relatively intuitive for users who wish to obtain an initial assessment of risk sensitivity, but should not be considered a substitute to a full understanding of the methods provided in the standard when dealing with more complicated structures or those where greater risks to personal or system operation are involved.
KW  - Risiko
KW  - Risikoabwägung
KW  - Blitzrisiko
KW  - Blitzschutz
KW  - Risk
KW  - Risk Management
KW  - Risk Assessment
KW  - Lightning Risk
KW  - Lightning Protection
Y1  - 2004
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Heidler, Fridolin
A1  - Seevers, M.
A1  - Zischank, Wolfgang J.
T1  - Magnetic Fields and Induced Voltages in case of a Direct Strike - Comparison of Results obtained from Measurements at a Scaled Building to those of IEC 62305-4
N2  - In the paper the results obtained from experiments at a modelled reinforced building in case of a direct lightning strike are compared with calculations. The comparison includes peak values of the magnetic field Hmax, its derivative (dH/dt)max and of induced voltages umax in typical cable routings. The experiments are performed at a 1:6 scaled building and the results are extrapolated using the similarity relations theory. The calculations are based on the approximate formulae given in IEC 62305-4 and have to be supplemented by a rough estimation of the additional shielding effect of a second reinforcement layer. The comparison shows, that the measured peak values of the magnetic field and its derivative are mostly lower than the calculated. The induced voltages are in good agreement. Hence, calculations of the induced voltages based on IEC 62305-4 are a good method for lightning protection studies of buildings, where the reinforcement is used as a grid-like electromagnetic shield.
N2  - Auswirkungen eines direkten Blitzeinschlages auf ein Gebäude, Vergleich von experimentellen Ergebnissen und Berechnungen basierend auf einer Formel aus der IEC 62305-4
KW  - Blitz
KW  - Direkter Blitzschlag
KW  - Elektromagnetischer Schutzschild
KW  - Magnetische Felder
KW  - Induzierte Spannungen
KW  - Kalkulation
KW  - Direct lightning strike
KW  - electromagnetic shield
KW  - magnetic fields
KW  - induced voltages
KW  - calculations
Y1  - 2004
SN  - 0304-3886
N1  - Journal of electrostatics: Beitr. auf S. 379 - 385. doi:10.1016/j.elstat.2006.09.004
ER  - 
TY  - CHAP
A1  - Zischank, Wolfgang J.
A1  - Heidler, Fridolin
A1  - Wiesinger, J.
A1  - Stimper, K.
A1  - Kern, Alexander
A1  - Seevers, M.
T1  - Magnetic Fields and Induced Voltages inside LPZ 1 Measured at a 1:6 Scale Model Building
N2  - Laborexperimente zu Blitzschutzzonen in Stahlbetongebäuden anhand eines Modells im Maßstab 1:6
N2  - For the application of the concept of Lightning Protection Zones (LPZ), the knowledge of the magnetic fields and induced voltages inside a structure is necessary. Laboratory experiments have been conducted at a downscaled model of a building (scale factor 1:6) to determine these electromagnetic quantities in case of a direct strike to the structure. The model (3 m x 2 m x 2 m) represented a small industrial building using the reinforcement of the concrete as electromagnetic shield. The magnetic fields and magnetic field derivatives were measured at several location inside the scaled model. Further, the voltages induced on three typical cable routes inside the model was determined. The influence of the lightning current waveshape, point-of-strike, bonding of the cable routes, and bridging of an expansion joint in the middle of the building on these quantities was studied.
KW  - Blitzschlag
KW  - Elektromagnetischer Schutzschild
KW  - Stahlbeton
KW  - Maßstabsgetreues Modell
KW  - Lightning
KW  - electromagnetic shielding
KW  - reinforced concrete
KW  - scaled model
Y1  - 2004
ER  - 
TY  - CHAP
A1  - Darveniza, M.
A1  - Flisowski, Z.
A1  - Kern, Alexander
A1  - Landers, E.-U.
A1  - LoPiparo, G.
A1  - Mazzetti, C.
A1  - Rousseau, A.
A1  - Sherlock, J.
T1  - Application problems of the probabilistic approach to the assessment of risk for structures and services
N2  - The paper deals with the development of the probabilistic approach to the assessment of risk due to lightning. Sources of damage, types of damage and types of loss are defined and, accordingly, the procedure for risk analysis and the way of assessment of different risk components is proposed. The way to evaluate the influence of different protection measures (lightning protection system; shielding of structure, cables and equipment; routing of internal wiring; surge protective device) in reducing such probabilities is considered. The paper has been prepared within the framework of the activity of IEC TC81-WG9/CLC TC81-WG4 directed to prepare the draft IEC 62305-2 Risk Management, in cooperation with the Secretary of IEC/CLC TC81.
KW  - Blitzschutz
KW  - Risikoabwägung
KW  - Lightning protection system
KW  - risk assessment
KW  - protection measures
Y1  - 2002
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Krichel, Frank
T1  - Considerations about the lightning protection system of mains independent renewable energy hybrid-systems - practical experiences
N2  - In the paper a lightning protection design concept for renewable energy hybrid-systems without power mains connection is described. Based on a risk analysis protection measures against direct strikes and overvoltages are shown in an overview. The design concept is realized exemplarily for the hybrid-system VATALI on the Greek island Crete. VATALI, not lightning protected at that time, was a victim of a lightning strike in the year 2000 causing destructions and damages of some mechanical and electrical components with costs of approx. 60.000 €. The hardware costs for the protection measures were about 15.000 €: about 50% of the costs are due to protection measures against direct strikes, 50% are due to overvoltage protection.
KW  - Blitzschutz
KW  - Erneuerbare Energien
KW  - Hybridsystem
KW  - Photovoltaikanlage
KW  - Windenergieanlage
KW  - Lightning protection
KW  - renewable energy
KW  - hybrid system
KW  - photovoltaic system
KW  - wind turbine
Y1  - 2002
ER  - 
TY  - CHAP
A1  - Zischank, Wolfgang J.
A1  - Heidler, Fridolin
A1  - Kern, Alexander
A1  - Metwally, I. A.
A1  - Wiesinger, J.
A1  - Seevers, M.
T1  - Laboratory simulation of direct lightning strokes to a modelled building - measurement of magnetic fields and induced voltages
N2  - In IEC 61312-2 equations for the assessment of the magnetic fields inside structures due to a direct lightning strike are given. These equations are based on computer simulations for shields consisting of a single-layer steel grid of a given mesh width. Real constructions, however, contain at least two layers of reinforcement steel grids. The objective of this study was to experimentally determine the additional shielding effectiveness of a second reinforcement layer compared to a single-layer grid. To this end, simulated structures were set up in the high current laboratory. The structures consisted of cubic cages of 2 m side length with one or with two reinforcement grids, respectively. The structures were exposed to direct lightning currents representing the variety of anticipated lightning current waveforms. The magnetic fields and their derivatives at several positions inside the structure as well as the voltage between “floor” and “roof” in the center were determined for different current injection points. From these data the improvement of the shielding caused by a second reinforcement layer is derived.
KW  - Direkter Blitzschlag
KW  - Elektromagnetischer Schutzschild
KW  - Magnetische Felder
KW  - Induzierte Spannungen
KW  - Stahlbetonkonstruktion
KW  - Lightning
KW  - electromagnetic shielding
KW  - magnetic field
KW  - reinforced concrete
KW  - induced voltage
Y1  - 2002
ER  - 
TY  - CHAP
A1  - Dielmann, Klaus-Peter
A1  - Peters, Bernhard
T1  - Micro Turbine Using Different Gases and Liquid Fuels
N2  - Micro turbine using different gases and liquid fuels
KW  - Gasturbine
KW  - Mikrogasturbine
KW  - Micro turbine
Y1  - 2002
ER  - 
TY  - CHAP
A1  - Fredebeul-Krein, Markus
T1  - Developing competitive broadband markets: Lessons learnt from German and European regulatory approaches on broad-band access
N2  - A key feature of future broadband markets will be diversity of access technologies, meaning that numerous technologies will be exploited for broadband communication. Various factors will affect the success of these future broadband markets, the regulatory policy being one amongst others. So far, a coherent regulatory approach does not exist as to broadband markets. First results of policies so far suggest that less sector-specific regulation is likely to occur. Instead, regulators must ensure that access to networks and services of potentially dominant providers in a relevant broadband market will satisfy requirements for openness and non-discrimination. In this environment the future challenge of regulationg broadband markets will be to set the right incentives for investment into new infrastructures. This paper examines whether there is a need for the regulation of future broadband access markets an if yes, what is the appropriate regulatory tool to do so. Thereby the focus is on the analysis of European broadband markets and the regulatory approaches applied. The first section provides a description of the characteristics of future broadband markets. The second section discusses possible bottlenecks on broadband markets an their regulatory implications. The third section will examine regulatory issues concerning access to broadband networks in more detail. This will be done by comparing the regulatory approaches of European countries and the results in terms of bradband penetration. The final section will give key recommendations for a regulatory strategy on brandband access markets.
KW  - Telekommunikationsmarkt
KW  - Telekommunikationsmarkt
Y1  - 2006
N1  - paper presented at 16th Biennial conference of the International Telecommunications Society. Information Communication Technology: Opportunities and Challenges for Telecommunications. June 12-16, 2006 Beijing, China.
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Ballmann, J.
T1  - Fundamental aspects of numerical methods for the propagation of multi-dimensional nonlinear waves in solids
T2  - Nonlinear hyperbolic equations : theory, computations methods, and applications ; proceedings of the 2nd International Conference on Nonlinear Hyperbolic Problems, Aachen
N2  - The nonlinear scalar constitutive equations of gases lead to a change in sound speed from point to point as would be found in linear inhomogeneous (and time dependent) media. The nonlinear tensor constitutive equations of solids introduce the additional local effect of solution dependent anisotropy. The speed of a wave passing through a point changes with propagation direction and its rays are inclined to the front. It is an open question whether the widely used operator splitting techniques achieve a dimensional splitting with physically reasonable results for these multi-dimensional problems. May be this is the main reason why the theoretical and numerical investigations of multi-dimensional wave propagation in nonlinear solids are so far behind gas dynamics. We hope to promote the subject a little by a discussion of some fundamental aspects of the solution of the equations of nonlinear elastodynamics. We use methods of characteristics because they only integrate mathematically exact equations which have a direct physical interpretation.
KW  - Nichtlineare Welle
KW  - Nichtlineare Gleichung
KW  - Festkörper
KW  - Elastodynamik
KW  - Multi-dimensional wave propagation
KW  - nonlinear solids
KW  - nonlinear tensor constitutive equation
Y1  - 1989
SP  - 574
EP  - 588
ER  - 
TY  - CHAP
A1  - Merten, Sabine
A1  - Conrad, Thorsten
A1  - Kämper, Klaus-Peter
A1  - Picard, Antoni
A1  - Schütze, Andreas
T1  - Virtual Technology Labs - an efficient tool for the preparation of hands-on-MEMS-courses in training foundries
N2  - Hands-on-training in high technology areas is usually limited due to the high cost for lab infrastructure and equipment. One specific example is the field of MEMS, where investment and upkeep of clean rooms with microtechnology equipment is either financed by production or R&D projects greatly reducing the availability for education purposes. For efficient hands-on-courses a MEMS training foundry, currently used jointly by six higher education institutions, was established at FH Kaiserslautern. In a typical one week course, students manufacture a micromachined pressure sensor including all lithography, thin film and packaging steps. This compact and yet complete program is only possible because participants learn to use the different complex machines in advance via a Virtual Training Lab (VTL). In this paper we present the concept of the MEMS training foundry and the VTL preparation together with results from a scientific evaluation of the VTL over the last three years.
KW  - Virtuelles Laboratorium
KW  - Virtuelles Labor
KW  - Hand-on-training
KW  - Virtual Technology Lab
KW  - MEMS ; education and training foundry
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Brüssermann, Klaus
T1  - Platform of Excellence in "Energy and Environment"
N2  - The Ministry of Science and Research in North Rhine-Westphalia created eight platforms of excellence, one in the research area „Energy and Environment“ in 2002 at ACUAS. This platform concentrates the research and development of 13 professors in Jülich and Aachen and of two scientific institutes with different topics: – NOWUM-Energy with emphasis on efficient and economic energy conversion – The Solar Institute Jülich – SIJ – being the largest research institute in the field of renewables at a University of Applied Sciences in Germany With this platform each possible energy conversion – nuclear, fossil, renewable- can be dealt with to help solving the two most important problems of mankind, energy and potable water. At the CSE are presented the historical development, some research results and the combined master studies in „Energy Systems“ and „Nuclear Applications“
KW  - Energietechnik
KW  - Kernenergie
KW  - Umwelt
KW  - Energy
KW  - environment
KW  - Energy Systems
KW  - Nuclear Applications
Y1  - 2005
ER  - 
TY  - CHAP
A1  - Brüssermann, Klaus
A1  - Deuster, M.
T1  - Temperature measurement to optimise the burning process
N2  - One of the most important parameters in a burning chamber - in power stations, in waste to energy plants - is the temperature. This temperature is in the range of 700-1500 °C - one of the most advanced measuring methods being the acoustic pyrometry with the possibility of producing temperature mapping in one level of the burning chamber - comparable to computer tomography. The results of these measurements discussed in the presentation can be used - to fulfil the legal requirements in the FRG or in the EU - to equalise the temperature in one level of the burning chamber to optimise the steam production (better efficiency of the plant) and to minimise the production of temperature controlled flue gas components (NO, CO a. o.) - to control the SNCR-process if used.
KW  - Pyrometrie
KW  - Temperaturmessung
KW  - temperature measurement
KW  - acoustic pyrometry
KW  - steam production
KW  - flue gas components
Y1  - 2005
ER  - 
TY  - CHAP
A1  - Gebhardt, Andreas
T1  - Technology Diffusion through a Multi-Level Technology Transfer Infrastructure. Contribution to the 1st. All Africa Technology Diffusion Conference Boksburg, South Africa June 12th - 14th 2006
N2  - Table of contents 1. Introduction 2. Multi-level Technology Transfer Infrastructure 2.1 Level 1: University Education – Encourage the Idea of becoming an Entrepreneur 2.2 Level 2: Post Graduate Education – Improve your skills and focus it on a product family. 2.3 Level 3: Birth of a Company – Focus your skills on a product and a market segment. 2.4 Level 4: Ready to stand alone – Set up your own business 2.5 Level 5: Grow to be Strong – Develop your business 2.6 Level 6: Competitive and independent – Stay innovative. 3. Samples 3.1 Sample 1: Laser Processing and Consulting Centre, LBBZ 3.2 Sample 2: Prototyping Centre, CP 4. Funding - Waste money or even lost Money? 5. Conclusion
KW  - Technologietransfer
KW  - technology transfer
KW  - technology diffusion
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
A1  - Kreißig, R.
T1  - Calculation of load carrying capacity of shell structures with elasto-plastic material by direct methods
N2  - Proceedings of the International Conference on Material Theory and Nonlinear Dynamics. MatDyn. Hanoi, Vietnam, Sept. 24-26, 2007, 8 p. In this paper, a method is introduced to determine the limit load of general shells using the finite element method. The method is based on an upper bound limit and shakedown analysis with elastic-perfectly plastic material model. A non-linear constrained optimisation problem is solved by using Newton’s method in conjunction with a penalty method and the Lagrangean dual method. Numerical investigation of a pipe bend subjected to bending moments proves the effectiveness of the algorithm.
KW  - Finite-Elemente-Methode
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Fredebeul-Krein, Markus
T1  - 10 years of liberalised telecom markets in Germany: Assessing the degree of competition on the markets for voice telephony
N2  - Market data for the German telecom market shows that Deutsche Telekom as the former incumbent is constantly loosing shares on all arkets for voice telephony: the market for local calls, the market for long-distance calls and the market for international calls. At the same time prices decline steadily with the latest trend being that operators offer voice services free of charge, the costs of which are covered by a monthly subscription charge. Against this background the paper examines the state of policy and regulatory reform in the telecommunications sector in Germany almost 10 years after the liberalisation of the fixed telecommunications market. Thereby the focus is on the analysis of the competitive conditions that have been established on the German market for voice telephony services. If these retail markets are competitive, there might be a need to remove remaining regulatory provisions. In the new environment of converging markets the future challenge of regulating fixed telecom markets might be to ensure that access to the network and/or services of a potentially dominant provider in a relevant market will satisfy requirements for openness and non-discrimination.
KW  - Telekommunikationsmarkt
KW  - Telekommunikationsmarkt
Y1  - 2007
N1  - paper presented at 18th European Regional ITS Conference of the International Telecommunications Society, September 2-4, 2007 Istanbul, Turkey
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
A1  - Kreißig, R.
T1  - Finite element shakedown and limit reliability analysis of thin shells
N2  - A procedure for the evaluation of the failure probability of elastic-plastic thin shell structures is presented. The procedure involves a deterministic limit and shakedown analysis for each probabilistic iteration which is based on the kinematical approach and the use the exact Ilyushin yield surface. Based on a direct definition of the limit state function, the non-linear problems may be efficiently solved by using the First and Second Order Reliabiblity Methods (Form/SORM). This direct approach reduces considerably the necessary knowledge of uncertain technological input data, computing costs and the numerical error. In: Computational plasticity / ed. by Eugenio Onate. Dordrecht: Springer 2007. VII, 265 S. (Computational Methods in Applied Sciences ; 7) (COMPLAS IX. Part 1 . International Center for Numerical Methods in Engineering (CIMNE)). ISBN 978-1-402-06576-7  S. 186-189
KW  - Finite-Elemente-Methode
KW  - Limit analysis
KW  - shakedown analysis
KW  - Exact Ilyushin yield surface
KW  - Random variable
KW  - First Order Reliabiblity Method
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Srivastava, Alok
A1  - Singh, Virendra
A1  - Dhand, Chetna
A1  - Kaur, Manindar
A1  - Singh, Tejvir
A1  - Witte, Katrin
A1  - Scherer, Ulrich W.
T1  - Study of swift heavy ion modified conduction polymer composites for application as gas sensor
N2  - A polyaniline-based conducting composite was prepared by oxidative polymerisation of aniline in a polyvinylchloride (PVC) matrix. The coherent free standing thin films of the composite were prepared by a solution casting method. The polyvinyl chloride-polyaniline composites exposed to 120 MeV ions of silicon with total ion fluence ranging from 1011 to 1013 ions/cm2, were observed to be more sensitive towards ammonia gas than the unirradiated composite. The response time of the irradiated composites was observed to be comparably shorter. We report for the first time the application of swift heavy ion modified insulating polymer conducting polymer (IPCP) composites for sensing of ammonia gas.
KW  - Biosensor
KW  - Conducing polymer
KW  - ammonia gas sensors
KW  - swift heavy ions
KW  - polymer composites
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1345
ER  - 
TY  - CHAP
A1  - Chaiyboun, Ali
A1  - Traute, Rüdiger
A1  - Kiesewetter, Olaf
A1  - Ahlers, Simon
A1  - Müller, Gerhard
A1  - Doll, Theodor
T1  - Modular analytical multicomponent analysis in gas sensor arrays
N2  - A multi-sensor system is a chemical sensor system which quantitatively and qualitatively records gases with a combination of cross-sensitive gas sensor arrays and pattern recognition software. This paper addresses the issue of data analysis for identification of gases in a gas sensor array. We introduce a software tool for gas sensor array configuration and simulation. It concerns thereby about a modular software package for the acquisition of data of different sensors. A signal evaluation algorithm referred to as matrix method was used specifically for the software tool. This matrix method computes the gas concentrations from the signals of a sensor array. The software tool was used for the simulation of an array of five sensors to determine gas concentration of CH4, NH3, H2, CO and C2H5OH. The results of the present simulated sensor array indicate that the software tool is capable of the following: (a) identify a gas independently of its concentration; (b) estimate the concentration of the gas, even if the system was not previously exposed to this concentration; (c) tell when a gas concentration exceeds a certain value. A gas sensor data base was build for the configuration of the software. With the data base one can create, generate and manage scenarios and source files for the simulation. With the gas sensor data base and the simulation software an on-line Web-based version was developed, with which the user can configure and simulate sensor arrays on-line.
KW  - Biosensor
KW  - Main sensitivity
KW  - cross sensitivity
KW  - matrix method
KW  - gas sensor array
KW  - modelling
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1358
ER  - 
TY  - CHAP
A1  - Sakthivel, Mariappan
A1  - Weppner, Werner
T1  - Response behaviour of a hydrogen sensor based on ionic conducting polymer-metal interfaces prepared by the chemical reduction method
N2  - A solid-state amperometric hydrogen sensor based on a protonated Nafion membrane and catalytic active electrode operating at room temperature was fabricated and tested. Ionic conducting polymer-metal electrode interfaces were prepared chemically by using the impregnation-reduction method. The polymer membrane was impregnated with tetra-ammine platinum chloride hydrate and the metal ions were subsequently reduced by using either sodium tetrahydroborate or potassium tetrahydroborate. The hydrogen sensing characteristics with air as reference gas is reported. The sensors were capable of detecting hydrogen concentrations from 10 ppm to 10% in nitrogen. The response time was in the range of 10-30 s and a stable linear current output was observed. The thin Pt films were characterized by XRD, Infrared Spectroscopy, Optical Microscopy, Atomic Force Microscopy, Scanning Electron Microscopy and EDAX.
KW  - Biosensor
KW  - Hydrogen sensor
KW  - amperometric sensor
KW  - porous Pt electrode
KW  - chemical reduction method
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1399
ER  - 
TY  - CHAP
A1  - Koplin, Tobias J.
A1  - Siemons, Maike
A1  - Océn-Valéntin, César
A1  - Sanders, Daniel
A1  - Simon, Ulrich
T1  - Workflow for high throughput screening of gas sensing materials
N2  - The workflow of a high throughput screening setup for the rapid identification of new and improved sensor materials is presented. The polyol method was applied to prepare nanoparticular metal oxides as base materials, which were functionalised by surface doping. Using multi-electrode substrates and high throughput impedance spectroscopy (HT-IS) a wide range of materials could be screened in a short time. Applying HT-IS in search of new selective gas sensing materials a NO2-tolerant NO sensing material with reduced sensitivities towards other test gases was identified based on iridium doped zinc oxide. Analogous behaviour was observed for iridium doped indium oxide.
KW  - Biosensor
KW  - High throughput experimentation
KW  - gas sensor
KW  - metal oxide
KW  - doping
KW  - impedance spectroscopy
KW  - nitrogen oxides
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1407
ER  - 
TY  - CHAP
A1  - Näther, Niko
A1  - Juárez, Leon M.
A1  - Emmerich, Rüdiger
A1  - Berger, Jörg
A1  - Friedrich, Peter
A1  - Schöning, Michael Josef
T1  - Detection of hydrogen peroxide (H2O2) at exposed temperatures for industrial processes
N2  - An H2O2 sensor for the application in industrial sterilisation processes has been developed. Therefore, automated sterilisation equipment at laboratory scale has been constructed using parts from industrial sterilisation facilities. In addition, a software tool has been developed for the control of the sterilisation equipment at laboratory scale. First measurements with the developed sensor set-up as part of the sterilisation equipment have been performed and the sensor has been physically characterised by optical microscopy and SEM.
KW  - Biosensor
KW  - Gas sensor
KW  - hydrogen peroxide
KW  - sterilisation
KW  - catalytic decomposition
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1418
ER  - 
TY  - CHAP
A1  - Wagner, Thorsten
A1  - Kohl, Claus-Dieter
A1  - Fröba, Michael
A1  - Tiemann, Michael
T1  - Gas sensing properties of ordered mesoporous SnO2
N2  - We report on the synthesis and CO gas-sensing properties of mesoporous tin(IV) oxides (SnO2). For the synthesis cetyltrimethylammonium bromide (CTABr) was used as a structure-directing agent; the resulting SnO2 powders were applied as films to commercially available sensor substrates by drop coating. Nitrogen physisorption shows specific surface areas up to 160 m2·g-1 and mean pore diameters of about 4 nm, as verified by TEM. The film conductance was measured in dependence on the CO concentration in humid synthetic air at a constant temperature of 300 °C. The sensors show a high sensitivity at low CO concentrations and turn out to be largely insensitive towards changes in the relative humidity. We compare the materials with commercially available SnO2-based sensors.
KW  - Biosensor
KW  - Tin oxide
KW  - sensing properties
KW  - CO
KW  - humidity
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1422
ER  - 
TY  - CHAP
A1  - Mirmohseni, Abdolreza
A1  - Rostamizadeh, Kobra
T1  - Quartz crystal nanobalance in conjunction with principal component analysis for  identification of volatile organic compounds
N2  - Quartz crystal nanobalance (QCN) sensors are considered as powerful masssensitive sensors to determine materials in the sub-nanogram level. In this study, a single piezoelectric quartz crystal nanobalance modified with polystyrene was employed to detect benzene, toluene, ethylbenzene and xylene (BTEX compounds). The frequency shift of the QCN sensor was found to be linear against the BTEX compound concentrations in the range about 1-45 mg l-1. The correlation coefficients for benzene, toluene, ethylbenzene, and xylene were 0.991, 0.9977, 0.9946 and 0.9971, respectively. The principal component analysis was also utilized to process the frequency response data of the single piezoelectric crystal at different times, considering to the different adsorption-desorption dynamics of BTEX compounds. Using principal component analysis, it was found that over 90% of the data variance could still be explained by use of two principal components (PC1 and PC2). Subsequently, the successful identification of benzene and toluene was possible through the principal component analysis of the transient responses of the polystyrene modified QCN sensor. The results showed that the polystyrene-modified QCN had favorable identification and quantification performances for the BTEX compounds.
KW  - Biosensor
KW  - Quartz crystal nanobalance (QCN)
KW  - BTEX compounds
KW  - principal component
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1434
ER  - 
TY  - CHAP
A1  - Kreutz, Christian
A1  - Lörgen, Jürgen
A1  - Graewe, Boris
A1  - Bargon, Joachim
A1  - Yoshida, Mayumi
A1  - Freso, Zachary M.
A1  - Frèchet, Jean M. J.
T1  - High frequency quartz micro balances: a promising path to enhanced sensitivity of gravimetric sensors
N2  - An array of 50 MHz quartz microbalances (QMBs) coated with a dendronized polymer was used to detect small amounts of volatile organic compounds (VOCs) in the gas phase. The results were compared to those obtained with the commonly used 10 MHz QMBs. The 50 MHz QMBs proved to be a powerful tool for the detection of VOCs in the gas phase; therefore, they represent a promising alternative to the much more delicate surface acoustic wave devices (SAWs).
KW  - Biosensor
KW  - Quartz micro balances
KW  - electronic noses dendronized polymers inverted mesa technology
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1445
ER  - 
TY  - CHAP
A1  - Rabner, Arthur
A1  - Shacham, Yosi
T1  - A concept for a sensitive micro total analysis system for high throughput fluorescence imaging
N2  - This paper discusses possible methods for on-chip fluorescent imaging for integrated bio-sensors. The integration of optical and electro-optical accessories, according to suggested methods, can improve the performance of fluorescence imaging. It can boost the signal to background ratio by a few orders of magnitudes in comparison to conventional discrete setups. The methods that are present in this paper are oriented towards building reproducible arrays for high-throughput micro total analysis systems (µTAS). The first method relates to side illumination of the fluorescent material placed into microcompartments of the lab-on-chip. Its significance is in high utilization of excitation energy for low concentration of fluorescent material. The utilization of a transparent µLED chip, for the second method, allows the placement of the excitation light sources on the same optical axis with emission detector, such that the excitation and emission rays are directed controversly. The third method presents a spatial filtering of the excitation background.
KW  - Biosensor
KW  - Fluorescence
KW  - imaging
KW  - lab-on-chip
KW  - fluidic
KW  - lenslet array
KW  - LED chip
KW  - image sensor
KW  - biosensor
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1456
ER  - 
TY  - CHAP
A1  - Förster, Arnold
A1  - Stock, Jürgen
A1  - Montanari, Simone
A1  - Lepsa, Mihail Ion
A1  - Lüth, Hans
T1  - Fabrication and characterisation of GaAs Gunn Diode Chips for applications at 77 GHz in automotive industry
N2  - GaAs-based Gunn diodes with graded AlGaAs hot electron injector heterostructures have been developed under the special needs in automotive applications. The fabrication of the Gunn diode chips was based on total substrate removal and processing of integrated Au heat sinks. Especially, the thermal and RF behavior of the diodes have been analyzed by DC, impedance and S-parameter measurements. The electrical investigations have revealed the functionality of the hot electron injector. An optimized layer structure could fulfill the requirements in adaptive cruise control (ACC) systems at 77 GHz with typical output power between 50 and 90 mW.
KW  - Biosensor
KW  - Gunn diode
KW  - microwave generation
KW  - GaAs hot electron injector
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1462
ER  - 
TY  - CHAP
A1  - Platen, Johannes
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Microstructured Nanostructures – nanostructuring by means of conventional photolithography and layer-expansion technique
N2  - A new and simple method for nanostructuring using conventional photolithography and layer expansion or pattern-size reduction technique is presented, which can further be applied for the fabrication of different nanostructures and nano-devices. The method is based on the conversion of a photolithographically patterned metal layer to a metal-oxide mask with improved pattern-size resolution using thermal oxidation. With this technique, the pattern size can be scaled down to several nanometer dimensions. The proposed method is experimentally demonstrated by preparing nanostructures with different configurations and layouts, like circles, rectangles, trapezoids, “fluidic-channel”-, “cantilever”- and meander-type structures.
KW  - Biosensor
KW  - Nanostructuring
KW  - layer expansion
KW  - pattern-size reduction
KW  - self-aligned patterning
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1477
ER  - 
TY  - CHAP
A1  - Pijanowska, Dorota G.
A1  - Remiszewska, Elzbieta
A1  - Pederzolli, Cecilia
A1  - Lunelli, Lorenzo
A1  - Vendano, Michele
A1  - Canteri, Roberto
A1  - Dudzinski, Konrad
A1  - Kruk, Jerzy
A1  - Torbicz, Wladyslaw
T1  - Surface modification for microreactor fabrication
N2  - In this paper, methods of surface modification of different supports, i.e. glass and polymeric beads for enzyme immobilisation are described. The developed method of enzyme immobilisation is based on Schiff’s base formation between the amino groups on the enzyme surface and the aldehyde groups on the chemically modified surface of the supports. The surface of silicon modified by APTS and GOPS with immobilised enzyme was characterised by atomic force microscopy (AFM), time-of-flight secondary ion mass spectroscopy (ToF-SIMS) and infrared spectroscopy (FTIR). The supports with immobilised enzyme (urease) were also tested in combination with microreactors fabricated in silicon and Perspex, operating in a flow-through system. For microreactors filled with urease immobilised on glass beads (Sigma) and on polymeric beads (PAN), a very high and stable signal (pH change) was obtained. The developed method of urease immobilisation can be stated to be very effective.
KW  - Biosensor
KW  - Microreactors
KW  - surface modification
KW  - enzyme immobilisation
KW  - lab-on-a-chip
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1480
ER  - 
TY  - CHAP
A1  - Bukhari, Syed Faisal Ahmed
A1  - Yang, Wuqiang
T1  - Multi-interface level sensors and new development in monitoring and control of oil separators
N2  - In the oil industry, huge saving may be made if suitable multi-interface level measurement systems are employed for effectively monitoring crude oil separators and efficient control of their operation. A number of techniques, e.g. externally mounted displacers, differential pressure transmitters and capacitance rod devices, have been developed to measure the separation process with gas, oil, water and other components. Because of the unavailability of suitable multi-interface level measurement systems, oil separators are currently operated by the trial-and-error approach. In this paper some conventional techniques, which have been used for level measurement in industry, and new development are discussed.
KW  - Biosensor
KW  - Level sensor
KW  - multi-interface measurement
KW  - electrical capacitance tomography
KW  - ECT
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1498
ER  - 
TY  - CHAP
A1  - Tymecki, Lukasz
A1  - Glab, Stanislaw
A1  - Koncki, Robert
T1  - Miniaturized, planar ion-selective electrodes fabricated by means of thick-film  technology
N2  - Various planar technologies are employed for developing solid-state sensors having low cost, small size and high reproducibility; thin- and thick-film technologies are most suitable for such productions. Screen-printing is especially suitable due to its simplicity, low-cost, high reproducibility and efficiency in large-scale production. This technology enables the deposition of a thick layer and allows precise pattern control. Moreover, this is a highly economic technology, saving large amounts of the used inks. In the course of repetitions of the film-deposition procedure there is no waste of material due to additivity of this thick-film technology. Finally, the thick films can be easily and quickly deposited on inexpensive substrates. In this contribution, thick-film ion-selective electrodes based on ionophores as well as crystalline ion-selective materials dedicated for potentiometric measurements are demonstrated. Analytical parameters of these sensors are comparable with those reported for conventional potentiometric electrodes. All mentioned thick-film strip electrodes have been totally fabricated in only one, fully automated thickfilm technology, without any additional manual, chemical or electrochemical steps. In all cases simple, inexpensive, commercially available materials, i.e. flexible, plastic substrates and easily cured polymer-based pastes were used.
KW  - Biosensor
KW  - Potentiometry
KW  - thick-film technology
KW  - screen-printing
KW  - ion-selective electrodes
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1506
ER  - 
TY  - CHAP
A1  - Spannhake, Jan
A1  - Schulz, Olaf
A1  - Helwig, Andreas
A1  - Krenkow, Angelika
A1  - Müller, Gerhard
A1  - Doll, Theodor
T1  - High-temperature MEMS heater platforms: long-term performance of metal and semiconductor heater materials
N2  - Micromachined thermal heater platforms offer low electrical power consumption and high modulation speed, i.e. properties which are advantageous for realizing nondispersive infrared (NDIR) gas- and liquid monitoring systems. In this paper, we report on investigations on silicon-on-insulator (SOI) based infrared (IR) emitter devices heated by employing different kinds of metallic and semiconductor heater materials. Our results clearly reveal the superior high-temperature performance of semiconductor over metallic heater materials. Long-term stable emitter operation in the vicinity of 1300 K could be attained using heavily antimony-doped tin dioxide (SnO2:Sb) heater elements.
KW  - Biosensor
KW  - Hotplate
KW  - heater metallisation
KW  - high-temperature stability
KW  - electro-migration
KW  - doped silicon
KW  - doped metal oxide
KW  - antimony doped tin oxide
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1513
ER  - 
TY  - CHAP
A1  - Katz, Eugenii
A1  - Willner, Itamar
T1  - Magneto-controlled quantized electron transfer to surface-confined redox units and metal nanoparticles
N2  - Hydrophobic magnetic nanoparticles (NPs) consisting of undecanoate-capped magnetite (Fe3O4, average diameter ca. 5 nm) are used to control quantized electron transfer to surface-confined redox units and metal NPs. A two-phase system consisting of an aqueous electrolyte solution and a toluene phase that includes the suspended undecanoatecapped magnetic NPs is used to control the interfacial properties of the electrode surface. The attracted magnetic NPs form a hydrophobic layer on the electrode surface resulting in the change of the mechanisms of the surface-confined electrochemical processes. A quinone-monolayer modified Au electrode demonstrates an aqueous-type of the electrochemical process (2e-+2H+ redox mechanism) for the quinone units in the absence of the hydrophobic magnetic NPs, while the attraction of the magnetic NPs to the surface results in the stepwise single-electron transfer mechanism characteristic of a dry nonaqueous medium. Also, the attraction of the hydrophobic magnetic NPs to the Au electrode surface modified with Au NPs (ca. 1.4 nm) yields a microenvironment with a low dielectric constant that results in the single-electron quantum charging of the Au NPs.
KW  - Biosensor
KW  - Nanoparticles
KW  - magnetic particles
KW  - quantum charging
KW  - modified electrode
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1528
ER  - 
TY  - CHAP
A1  - Pijanowska, Dorota G.
A1  - Remiszewska, Elzbieta
T1  - pH-based detection of phenylalnine by potentiometric and colorimetric methods
N2  - In this paper, methods of sample preparation for potentiometric measurement of phenylalanine are presented. Basing on the spectrophotometric measurements of phenylalanine, the concentrations of reagents of the enzymatic reaction (10 mM L-Phe, 0,4 mM NAD+, 2U L-PheDH) were determined. Then, the absorption spectrum of the reaction product, NADH, was monitored (maximum peak at 340 nm). The results obtained by the spectrophotometric method were compared with the results obtained by the colourimetry, using pH indicators. The above-mentioned two methods will be used as references for potentiometric measurements of phenylalanine concentration.
KW  - Biosensor
KW  - Phenylalanine determination
KW  - enzymatic methods
KW  - pH-based biosensing
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1536
ER  - 
TY  - CHAP
A1  - Arida, Hassan A.
A1  - Kloock, Joachim P.
A1  - Schöning, Michael Josef
T1  - Novel organic membrane-based thin-film microsensors for the determination of heavy metal cations
N2  - A first step towards the fabrication and electrochemical evaluation of thin-film microsensors based on organic PVC membranes for the determination of Hg(II), Cd(II), Pb(II) and Cu(II) ions in solutions has been realised. The membrane-coating mixture used in the preparation of this new type of microsensors is incorporating PVC as supporting matrix, o-nitrophenyloctylether (o-NPOE) as solvent mediator and a recently synthesized Hg[dimethylglyoxime(phene)]2+ and Bis-(4-hydroxyacetophenone)-ethylenediamine as electroactive materials for Hg(II) and Cd(II), respectively. A set of three commercialised ionophores for Cd(II), Pb(II) and Cu(II) has been also used for comparison. Thin-film microsensors based on these membranes showed a Nernstian response of slope (26-30 mV/dec.) for the respective tested cations. The potentiometric response characteristics (linear range, pH range, detection limit and response time) are comparable with those obtained by conventional membranes as well as coated wire electrodes prepared from the same membrane. The realisation of the new organic membrane-based thin-film microsensors overcomes the problem of an insufficient selectivity of solid-state-based thinfilm sensors.
KW  - Biosensor
KW  - Heavy metal detection
KW  - thin-film microsensors
KW  - organic PVC membranes
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1545
ER  - 
TY  - CHAP
A1  - Barek, Jiri
A1  - Fischer, Jan
A1  - Navratil, Tomas
A1  - Peckova, Karolina
A1  - Yosypchuk, Bogdan
T1  - Silver solid amalgam electrodes as sensors for chemical carcinogens
N2  - The applicability of differential pulse voltammetry (DPV) and adsorptive stripping voltammetry (AdSV) at a non-toxic meniscus-modified silver solid amalgam electrode (m-AgSAE) for the determination of trace amounts of genotoxic substances was demonstrated on the determination of micromolar and submicromolar concentrations of 3-nitrofluoranthene using methanol - 0.01 mol L-1 NaOH (9:1) mixture as a base electrolyte and of Ostazine Orange using 0.01 mol L-1 NaOH as a base electrolyte.
KW  - Biosensor
KW  - Solid amalgam electrodes
KW  - voltammetry
KW  - carcinogens
KW  - 3-nitrofluoranthene
KW  - Ostazine Orange
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1554
ER  - 
TY  - CHAP
A1  - Baronas, Romas
A1  - Ivanauskas, Feliksas
A1  - Kulys, Juozas
T1  - Mathematical modeling of biosensors based on an array of enzyme microreactors
N2  - This paper presents a two-dimensional-in-space mathematical model of biosensors based on an array of enzyme microreactors immobilised on a single electrode. The modeling system acts under amperometric conditions. The microreactors were modeled by particles and by strips. The model is based on the diffusion equations containing a nonlinear term related to the Michaelis-Menten kinetics of the enzymatic reaction. The model involves three regions: an array of enzyme microreactors where enzyme reaction as well as mass transport by diffusion takes place, a diffusion limiting region where only the diffusion takes place, and a convective region, where the analyte concentration is maintained constant. Using computer simulation, the influence of the geometry of the microreactors and of the diffusion region on the biosensor response was investigated. The digital simulation was carried out using the finite difference technique.
KW  - Biosensor
KW  - Reaction-diffusion
KW  - modeling biosensor
KW  - microreactor
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1569
ER  - 
TY  - CHAP
A1  - Weßling, Matthias
T1  - Leadership Perspectives: Research Findings, Theories, Practical Experiences
N2  - Leadership Perspectives: Research Findings, Theories, Practical Experiences: Results of Leadership Research and exemplarily application cases show the perspectives and consequences for leadership practice and the following requirements for executives in future.
N2  - Leadership Perspectives: Research Findings, Theories, Practical Experiences: Bisherige Ergebnisse der betriebswirtschaftlichen Führungsforschung und exemplarische Anwendungsbeispiele der Führungspraxis, sowie die Schlußfolgerungen für die Perspektiven der betrieblichen Mitarbeiterführung sowie die sich daraus ergebenden Anforderungen an zukünftige Führungskräfte.
KW  - Leadership
KW  - Führung
KW  - Führungsansätze
KW  - Leadership
KW  - Self-Leadership
KW  - Leadership Approaches
KW  - Skill Assessment
KW  - Leadership Theories
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Weßling, Matthias
T1  - Motivation and Leadership - The Reiss-Profile of the 16 Basic Desires: Research results and managerial applications
N2  - Recent Results of the scientific Reiss-Profile (16 basic desires) due to the concept of Prof. Dr. Steven Reiss (State University Ohio, U.S.A.), supplemented by the comparative analysis of empirical motivational profiles of european executives of various companies.
N2  - Neuere Forschungsergebnisse des wissenschaftlichen Reiss-Profils der 16 Lebensmotive nach Prof. Dr. Steven Reiss (State University Ohio, U.S.A.) und die Möglichkeiten und Grenzen ihrer Umsetzung in der betrieblichen Führungspraxis unter Integration der vergleichenden Analyse und Interpretation empirisch erhobener Motivprofile einzelner europäischer Führungskräfte.
KW  - Motivation
KW  - Leadership
KW  - Motivation
KW  - Führung
KW  - Motivation
KW  - Leadership
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Weßling, Matthias
T1  - Provocative Communication in Coaching and Leadership: scientific research and managerial applications of the Provocative Communication Style
N2  - Concept, scientific research and managerial applications of Provocative Coaching, according to the „Provocative Therapy“ of Prof. Dr. Frank Farrelly (University of Wisconsin, U.S.A) in terms of an application of the Provocative Communication Style in specific situations of practical leadership, especially in the role of a coach for their subordinates.
N2  - Konzept, Forschungsergebnisse und Tools der sogenannten „Provocative Therapy“ nach Prof. Dr. Frank Farrelly (University of Wisconsin, U.S.A) und ihre Anwendung als provokativer Kommunikationsstil einer Führungskraft in spezifischen Situationen der betrieblichen Führungspraxis in der Rolle eines Coaches.
KW  - Kommunikation
KW  - Coaching
KW  - Führung
KW  - Kommunikation
KW  - Coaching
KW  - Führung
KW  - Provokativer Stil
KW  - Provocative Coaching
KW  - Leadership
KW  - Communication
KW  - Provocative Style
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Lei, Yu
A1  - Mulchandani, Priti
A1  - Chen, Wilfred
A1  - Mulchandani, Ashok
T1  - Biosensor for direct determination of fenitrothion and EPN using recombinant Pseudomonas putida JS444 with surface expressed organophosphorus hydrolase. 1. modified clark oxygen electrode
N2  - This paper reports a first microbial biosensor for rapid and cost-effective determination of organophosphorus pesticides fenitrothion and EPN. The biosensor consisted of recombinant PNP-degrading/oxidizing bacteria Pseudomonas putida JS444 anchoring and displaying organophosphorus hydrolase (OPH) on its cell surface as biological sensing element and a dissolved oxygen electrode as the transducer. Surfaceexpressed OPH catalyzed the hydrolysis of fenitrothion and EPN to release 3-methyl-4-nitrophenol and p-nitrophenol, respectively, which were oxidized by the enzymatic machinery of Pseudomonas putida JS444 to carbon dioxide while consuming oxygen, which was measured and correlated to the concentration of organophosphates. Under the optimum operating conditions, the biosensor was able to measure as low as 277 ppb of fenitrothion and 1.6 ppm of EPN without interference from phenolic compounds and other commonly used pesticides such as carbamate pesticides, triazine herbicides and organophosphate pesticides without nitrophenyl substituent. The applicability of the biosensor to lake water was also demonstrated.
KW  - Biosensor
KW  - Organophosphorus
KW  - fenitrothion
KW  - EPN
KW  - biosensor
KW  - Pseudomonas putida
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1573
ER  - 
TY  - CHAP
A1  - Staat, Manfred
T1  - Problems and chances for probabilistic fracture mechanics in the analysis of steel pressure boundary reliability. - Überarb. Ausg.
N2  - In: Technical feasibility and reliability of passive safety systems for nuclear power plants. Proceedings of an Advisory Group Meeting held in Jülich, 21-24 November 1994. - Vienna , 1996. - Seite: 43 - 55 IAEA-TECDOC-920 Abstract: It is shown that the difficulty for probabilistic fracture mechanics (PFM) is the general problem of the high reliability of a small population. There is no way around the problem as yet. Therefore what PFM can contribute to the reliability of steel pressure boundaries is demon­strated with the example of a typical reactor pressure vessel and critically discussed. Although no method is distinguishable that could give exact failure probabilities, PFM has several addi­tional chances. Upper limits for failure probability may be obtained together with trends for design and operating conditions. Further, PFM can identify the most sensitive parameters, improved control of which would increase reliability. Thus PFM should play a vital role in the analysis of steel pressure boundaries despite all shortcomings.
KW  - Bruchmechanik
KW  - probabilistic fracture mechanics
KW  - PFM
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Schürmann, Volker
A1  - Leidinger, R.
A1  - Wollert, Jörg
T1  - Simplified rapid-prototyping with automation technology
T2  - Automobiles and sustainable mobility : FISITA 2010 World Automotive Congress, 30 May - 4 June, Budapest, Hungary ; proceedings
Y1  - 2010
SN  - 978-963-9058-29-3
SP  - F2010C093
ER  - 
TY  - CHAP
A1  - Moreno, Lia
A1  - Dosev, D.
A1  - Bratov, A.
A1  - Dominguez, C.
A1  - Schöning, Michael Josef
A1  - Kloock, Joachim P.
T1  - Effect of electrical properties of the surrounding medium on the response of an interdigitated electrode array with chalcogenide glass film
T2  - XX Eurosensors : 20th anniversary ; Göteborg, Sweden, 17 - 20 September 2006 ; [proceedings]. - Vol. 1
Y1  - 2006
SN  - 978-91-631-9280-7
N1  - Paper number: T1A-P22
SP  - 384
EP  - 385
CY  - Göteborg
ER  - 
TY  - CHAP
A1  - Hüning, Felix
T1  - Power semiconductors : key components for HEV/EV
T2  - FISITA 2014 World Automotive Congress : 2 - 6 June, Maastricht, the Netherlands International Federation of Automotive Engineering Societies
Y1  - 2014
N1  - Datenformat: PDF
PB  - KIVI
CY  - [s.l.]
ER  - 
TY  - CHAP
A1  - Stieglitz, Kristian
A1  - Wollert, Jörg
T1  - Approach of using ultra-wideband-radio in industrial real-time ethernet networks
T2  - The 4th International Multi-Conference on Engineering and Technological Innovation : IMETI : July 19th - July 22nd, 2011, Orlando, Florida, USA
Y1  - 2011
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Wollert, Jörg
T1  - The performance of UWB-communication in an industrial environment
T2  - IEEE 1st International Symposium on Wireless Systems : (IDAACS-SWS) : Offenburg, 20-21 Sept. 2012
Y1  - 2012
SN  - 978-1-4673-4678-8
U6  - http://dx.doi.org/10.1109/IDAACS-SWS.2012.6377639
SP  - 85
EP  - 90
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Buschkühle, Peter
A1  - Schürmann, Volker
A1  - Wollert, Jörg
T1  - Abstraction of wireless communication by a convergence middleware in conjunction with a XML-configuration
T2  - Information technology and electrical engineering : devices and systems, materials and technologies for the future ; Ilmenau 07 - 10 September 2009 ; 54. IWK Internationales Wissenschaftliches Kolloquium
Y1  - 2009
SN  - 978-3-938843-44-4
SP  - 95
EP  - 96
PB  - Techn. Univ.
CY  - Ilmenau
ER  - 
TY  - CHAP
A1  - Kronhardt, Valentina
A1  - Alexopoulos, Spiros
A1  - Reißel, Martin
A1  - Latzke, Markus
A1  - Rendon, C.
A1  - Sattler, Johannes, Christoph
A1  - Herrmann, Ulf
T1  - Simulation of operational management for the Solar Thermal Test and Demonstration Power Plant Jülich using optimized control strategies of the storage system
T2  - Energy procedia
Y1  - 2015
SN  - 1876-6102
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Schürmann, Volker
A1  - Buda, Aurel
A1  - Wollert, Jörg
T1  - XML-based Middleware approach for industrial wireless communication systems
T2  - IEEE International Conference on Emerging Technologies and Factory Automation, 2008 : ETFA 2008 ; 15 - 18 Sept., 2008, Hamburg, Germany
Y1  - 2008
SN  - 978-1-4244-1505-2
U6  - http://dx.doi.org/10.1109/ETFA.2008.4638463
SP  - 632
EP  - 639
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Schürmann, Volker
A1  - Keller, Alex
A1  - Wollert, Jörg
T1  - Internet based middleware approach for building services
T2  - Proceedings / IMETI 2009, the 2nd International Multi-Conference on Engineering and Technological Innovation : July 10 - 13, 2009 Orlando, Florida, USA ; vol. 1
Y1  - 2009
SN  - 1-934272-68-X ; 978-1-934272-68-8
SP  - 30
EP  - 34
PB  - IIIS
CY  - Winter Garden, Fla.
ER  - 
TY  - CHAP
A1  - Schürmann, Volker
A1  - Mann, Thorsten
A1  - Buda, Aurel
A1  - Wollert, Jörg
T1  - Integrating bluetooth localization into existing TCP/IP networks
T2  - IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, 2009 : IDAACS 2009 ; Rende, Cosenza, Italy, 21 - 23 Sept. 2009
Y1  - 2009
SN  - 978-1-4244-4882-1 ; ISBN: 978-1-4244-4901-9
U6  - http://dx.doi.org/10.1109/IDAACS.2009.5342903
SP  - 621
EP  - 624
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Vedral, Andreas
A1  - Wollert, Jörg
A1  - Buda, A.
A1  - Altrock, R.
T1  - The capability of bluetooth for real-time transmission in automation
T2  - Proceedings of the IASTED International Conference on Networks and Communication Systems 2006 : March 29 - 31, 2006, Chiang Mai, Thailand
Y1  - 2006
SP  - 168
EP  - 175
PB  - Acta Pr.
CY  - Anaheim, Calif.
ER  - 
TY  - CHAP
A1  - Vedral, Andreas
A1  - Kruse, Thomas
A1  - Wollert, Jörg
T1  - Development and performance evaluation of an antenna diversity module for industrial communication based on IEEE 802.15.4
T2  - 12th IEEE International Conference on Emerging Technologies and Factory Automation : ETFA 2007 : proceedings : 25-28 Sept. 2007, Patras, Greece
Y1  - 2007
SN  - 1424408261 ; 9781424408269
U6  - http://dx.doi.org/10.1109/EFTA.2007.4416769
SP  - 177
EP  - 186
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Vedral, Andreas
A1  - Wollert, Jörg
T1  - Service based Bluetooth dual-hop networks using CORBA
T2  - Proceedings of the IASTED International Conference on Artificial Intelligence and Applications : as part of the 23rd IASTED International Multi-Conference on Applied Informatics ; February 14 - 16, 2005, Innsbruck, Austria
Y1  - 2005
SN  - 0-88986-457-8
SP  - 724
EP  - 728
PB  - Acta Pr.
CY  - Anaheim, Calif.
ER  - 
TY  - CHAP
A1  - Wollert, Jörg
A1  - Plessmann, K. W.
T1  - Controlling processes by operating-point based hybride observers
T2  - EUFIT '93 : September 7 - 10, 1993, Eurogress Aachen, Germany, proceedings / First European Congress on Fuzzy and Intelligent Technologies
Y1  - 1993
SN  - 3-86073-176-9
SP  - 1151
EP  - 1155
PB  - Verl. d. Augustinus Buchh.
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Janotte, N.
A1  - Feckler, G.
A1  - Kötter, Jens
A1  - Decker, Stefan
A1  - Herrmann, Ulf
A1  - Schmitz, Mark
A1  - Lüpfert, E.
T1  - Dynamic performance evaluation of the HelioTrough® collector demonstration loop : towards a new benchmark in parabolic trough qualification
T2  - SolarPACES International Conference 2013, Las Vegas, Nevada, USA, 17 - 20 September 2013 : [proceedings]. - Pt. 1. - (Energy procedia ; 49)
Y1  - 2014
SN  - 978-1-63266-904-9
U6  - http://dx.doi.org/10.1016/j.egypro.2014.03.012
SN  - 1876-6102
N1  - Nebent.: Power and Chemical Energy Systems concentrating solar power
SP  - 109
EP  - 117
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Herrmann, Ulf
A1  - Vorbrugg, O.
A1  - Nava, P.
T1  - Construction and Commissioning Process of the Andasol Solar Field
T2  - SolarPACES 2009 : electricity, fuels and clean water powered by the sun ; 15 - 18 September 2009, Berlin, Germany ; the 15th SolarPACES conference ; proceedings
Y1  - 2009
SN  - 978-3-00-028755-8
PB  - Deutsches Zentrum für Luft- u. Raumfahrt
CY  - Stuttgart
ER  - 
TY  - CHAP
A1  - Kelly, Bruce
A1  - Herrmann, Ulf
A1  - Hale, M.-J.
T1  - Optimization Studies for Integrated Solar Combined Cycle Systems
T2  - Solar engineering 2001 : proceedings of the International Solar Energy Conference ; presented at the 2001 International Solar Energy Conference, a part of Forum 2001 - Solar energy: the power to choose, April 21 - 25, 2001, Washington, D.C.
Y1  - 2001
SN  - 0-7918-1670-2
N1  - International Solar Energy Conference <Washington, D.C.>
SP  - 393
EP  - 398
PB  - ASME
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Pietsch, Wolfram
T1  - A framework of quality function deployment
T2  - Quality management / eds.: M. Ross ... (Software quality management ; 3,1)
Y1  - 1995
SN  - 1-85312-309-9
SP  - 419
EP  - 428
PB  - Computational Mechanics Publ.
CY  - Southhampton
ER  -