TY  - JOUR
A1  - Fischer, W. A.
A1  - Dören, Horst-Peter
A1  - Janke, Dieter
T1  - Aluminium nitride probes for application in iron melts
JF  - Archiv für das Eisenhüttenwesen. 52 (1981), H. 3
Y1  - 1981
SN  - 0003-8962
SP  - 91
EP  - 98
ER  - 
TY  - JOUR
A1  - Haissig, Manfred
A1  - Dören, Horst-Peter
A1  - Wilmes, S.
T1  - Stand der Entwicklung des Horizontal-Stranggießens von Edelstahl bei der Böhler AG
JF  - Stahl und Eisen. Zeitschrift für die Herstellung und Verarbeitung von Eisen und Stahl. Hrsg.: Verein Deutscher Eisenhüttenleute (VDEh) ; Wirtschaftsvereinigung Stahl. 101 (1981), H. 6
Y1  - 1981
SN  - 0340-4803
SP  - 383
EP  - 390
ER  - 
TY  - JOUR
A1  - Dören, Horst-Peter
A1  - Wernicke, K.
T1  - Slijtvaste lagen door oplassen met plasmapoeder
JF  - Metaal en Kunststof: MK. Universeel weekblad voor fabriek en werkplaats. 24 (1987), Nr. 23
Y1  - 1987
SN  - 0026-0460
SP  - 76
EP  - 79
ER  - 
TY  - JOUR
A1  - Kern, Alexander
A1  - Braun, Christian
T1  - Neuerungen bei der Blitzschutznorm. Teil 2
JF  - etz Elektrotechnik und Automation
Y1  - 2013
SN  - 0170-1711
N1  - Printausg. in der Bibliothek der FH Aachen vorhanden: 23 Z 133 ; 63 ZS 035
VL  - Bd. 134
IS  - H. 8
SP  - 66
EP  - 69
PB  - VDE-Verlag
CY  - Wuppertal
ER  - 
TY  - JOUR
A1  - Hellmanns, Mark
A1  - Böhm, Stefan
A1  - Dilger, Klaus
T1  - Manual applications of adhesives
JF  - Journal of adhesion and interface
Y1  - 2006
VL  - Vol. 7
IS  - No. 4
SP  - 24
EP  - 27
ER  - 
TY  - JOUR
A1  - Böhm, Stefan
A1  - Hellmanns, Mark
A1  - Backes, Andreas
A1  - Dilger, Klaus
T1  - Lock-in thermography based NDT of parts for the automotive industry
JF  - Journal of adhesion and interface
Y1  - 2006
VL  - Vol. 7
IS  - No. 4
SP  - 10
EP  - 12
ER  - 
TY  - JOUR
A1  - Sabitova, A.
A1  - Ebert, Ph.
A1  - Lenz, A.
A1  - Schaafhausen, S.
A1  - Ivanova, L.
A1  - Dähne, M.
A1  - Hoffmann, A.
A1  - Dunin-Borkowski, R. E.
A1  - Förster, Arnold
A1  - Grandidier, B.
A1  - Eisele, H.
T1  - Intrinsic bandgap of cleaved ZnO(112¯0) surfaces
JF  - Applied physics letters
Y1  - 2013
SN  - 1077-3118 (E-Journal); 0003-6951 (Print)
VL  - Vol. 102
SP  - 021608
ER  - 
TY  - JOUR
A1  - Goldbach, Daniel
T1  - Fahrstabilitätserhöhung bei Gespannen durch Querverschiebung des Anhängerkupplungspunktes
JF  - mechatronik mobil
Y1  - 2010
SN  - 1867-7371
VL  - 2
IS  - 1
SP  - 23
EP  - 29
PB  - Expert Verlag
CY  - Renningen
ER  - 
TY  - JOUR
A1  - Alebouyeh Samami, Behzad
A1  - Pieper, Martin
A1  - Breitbach, Gerd
A1  - Hodapp, Josef
T1  - Heat production in the windings of the stators of electric machines under stationary condition
JF  - Heat and mass transfer
N2  - In electric machines due to high currents and resistive losses (joule heating) heat is produced. To avoid damages by overheating the design of effective cooling systems is required. Therefore the knowledge of heat sources and heat transfer processes is necessary. The purpose of this paper is to illustrate a good and effective calculation method for the temperature analysis based on homogenization techniques. These methods have been applied for the stator windings in a slot of an electric machine consisting of copper wires and resin. The key quantity here is an effective thermal conductivity, which characterizes the heterogeneous wire resin-arrangement inside the stator slot. To illustrate the applicability of the method, the analysis of a simplified, homogenized model is compared with the detailed analysis of temperature behavior inside a slot of an electric machine according to the heat generation. We considered here only the stationary situation. The achieved numerical results are accurate and show that the applied homogenization technique works in practice. Finally the results of simulations for the two cases, the original model of the slot and the homogenized model chosen for the slot (unit cell), are compared to experimental results.
Y1  - 2014
U6  - https://doi.org/10.1007/s00231-014-1371-8
SN  - 0947-7411 (Print) ; 1432-1181 (E-Journal)
VL  - 50
SP  - 1707
EP  - 1716
PB  - Springer
CY  - Heidelberg
ER  - 
TY  - JOUR
A1  - Jildeh, Zaid B.
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Pieper, Martin
T1  - Simulating the electromagnetic‐thermal treatment of thin aluminium layers for adhesion improvement
JF  - Physica status solidi (a)
N2  - A composite layer material used in packaging industry is made from joining layers of different materials using an adhesive. An important processing step in the production of aluminium-containing composites is the surface treatment and consequent coating of adhesive material on the aluminium surface. To increase adhesion strength between aluminium layer and the adhesive material, the foil is heat treated. For efficient heating, induction heating was considered as state-of-the-art treatment process. Due to the complexity of the heating process and the unpredictable nature of the heating source, the control of the process is not yet optimised. In this work, a finite element analysis of the process was established and various process parameters were studied. The process was simplified and modelled in 3D. The numerical model contains an air domain, an aluminium layer and a copper coil fitted with a magnetic field concentrating material. The effect of changing the speed of the aluminium foil (or rolling speed) was studied with the change of the coil current. Statistical analysis was used for generating a general control equation of coil current with changing rolling speed.
Y1  - 2015
U6  - https://doi.org/10.1002/pssa.201431893
SN  - 1862-6319
VL  - Vol. 212
IS  - 6
SP  - 1234
EP  - 1241
PB  - Wiley
CY  - Weinheim
ER  -