TY  - JOUR
A1  - Eichler, Fabian
A1  - Balc, Nicolae
A1  - Bremen, Sebastian
A1  - Nink, Philipp
T1  - Investigation of laser powder bed fusion parameters with respect to their influence on the thermal conductivity of 316L samples
JF  - Journal of Manufacturing and Materials Processing
N2  - The thermal conductivity of components manufactured using Laser Powder Bed Fusion (LPBF), also called Selective Laser Melting (SLM), plays an important role in their processing. Not only does a reduced thermal conductivity cause residual stresses during the process, but it also makes subsequent processes such as the welding of LPBF components more difficult. This article uses 316L stainless steel samples to investigate whether and to what extent the thermal conductivity of specimens can be influenced by different LPBF parameters. To this end, samples are set up using different parameters, orientations, and powder conditions and measured by a heat flow meter using stationary analysis. The heat flow meter set-up used in this study achieves good reproducibility and high measurement accuracy, so that comparative measurements between the various LPBF influencing factors to be tested are possible. In summary, the series of measurements show that the residual porosity of the components has the greatest influence on conductivity. The degradation of the powder due to increased recycling also appears to be detectable. The build-up direction shows no detectable effect in the measurement series.
KW  - Additive manufacturing
KW  - LPBF
KW  - SLM
KW  - Thermal conductivity
KW  - 316L
Y1  - 2024
U6  - https://doi.org/10.3390/jmmp8040166
SN  - 2504-4494
N1  - Corresponding author: Fabian Eichler
VL  - 8
IS  - 4
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Vahidpour, Farnoosh
A1  - Alghazali, Yousef H. M.
A1  - Akca, Sevilay
A1  - Hommes, Gregor
A1  - Schöning, Michael Josef
T1  - An Enzyme-Based Interdigitated Electrode-Type Biosensor for Detecting Low Concentrations of H₂O₂ Vapor/Aerosol
JF  - Chemosensors
N2  - This work introduces a novel method for the detection of H₂O₂ vapor/aerosol of low concentrations, which is mainly applied in the sterilization of equipment in medical industry. Interdigitated electrode (IDE) structures have been fabricated by means of microfabrication techniques. A differential setup of IDEs was prepared, containing an active sensor element (active IDE) and a passive sensor element (passive IDE), where the former was immobilized with an enzymatic membrane of horseradish peroxidase that is selective towards H₂O₂. Changes in the IDEs’ capacitance values (active sensor element versus passive sensor element) under H₂O₂ vapor/aerosol atmosphere proved the detection in the concentration range up to 630 ppm with a fast response time (<60 s). The influence of relative humidity was also tested with regard to the sensor signal, showing no cross-sensitivity. The repeatability assessment of the IDE biosensors confirmed their stable capacitive signal in eight subsequent cycles of exposure to H₂O₂ vapor/aerosol. Room-temperature detection of H₂O₂ vapor/aerosol with such miniaturized biosensors will allow a future three-dimensional, flexible mapping of aseptic chambers and help to evaluate sterilization assurance in medical industry.
Y1  - 2022
U6  - https://doi.org/10.3390/chemosensors10060202
SN  - 2227-9040
N1  - This article belongs to the Special Issue "Bioinspired Chemical Sensors and Micro-Nano Devices"
VL  - 10
IS  - 6
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Baumann, Marcus
A1  - Tillmann, Urban
A1  - Aletsee, Ludwig
T1  - Distribution of Carbon Among Photosynthetic End Products in the Bloom-Forming Arctic Diatom Thalassiosira antarctica COMBER / Tillmann, U. ; Baumann, M.E.M. ; Aletsee, L.
JF  - Polar Biology. 10 (1989), H. 3
Y1  - 1989
SN  - 0722-4060
SP  - 231
EP  - 238
ER  - 
TY  - JOUR
A1  - Bialonski, Stephan
A1  - Allefeld, Carsten
A1  - Wellmer, Jörg
A1  - Elger, Christian E.
A1  - Lehnertz, Klaus
T1  - An approach to identify synchronization clusters within the epileptic network
JF  - Klinische Neurophysiologie
Y1  - 2008
U6  - https://doi.org/10.1055/s-2008-1072881
VL  - 39
IS  - 1
SP  - A79
ER  - 
TY  - CHAP
A1  - Al-Kaidy, Huschyar
A1  - Ulber, Roland
A1  - Tippkötter, Nils
T1  - A platform technology for the automated reaction control in magnetizable micro-fluidic droplets
T2  - Biomaterials - made in bioreactors : book of abstracts, May 26 - 28, 2014, Radisson Blu Park Hotel and Conference Dentre, Radebeul, Germany
Y1  - 2014
SP  - 21
EP  - 22
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - CHAP
A1  - Burgazzi, Luciano
A1  - Fiorini, Gian Luigi
A1  - De Magistris, F.
A1  - Lensa, Werner von
A1  - Staat, Manfred
A1  - Atles, J.
T1  - Reliability Assessment of Passive Safety Systems
T2  - Proceedings of the 6th International Conference on Nuclear Engineering : ICONE : May 10 - 14, 1998, San Diego, Calif.
Y1  - 1998
N1  - CD-ROM
PB  - American Society of Mechanical Engineers
CY  - New York
ER  - 
TY  - JOUR
A1  - Grinsven, Bart van
A1  - Vanden Bon, Natalie
A1  - Grieten, Lars
A1  - Murib, Mohammed Sharif
A1  - Janssen, Stoffel Dominique
A1  - Haenen, Ken
A1  - Schneider, E.
A1  - Ingebrandt, Sven
A1  - Schöning, Michael Josef
A1  - Vermeeren, Veronique
A1  - Ameloot, Marcel
A1  - Michiels, Luc
A1  - Thoelen, Ronald
A1  - De Ceuninck, Ward A.
A1  - Wagner, Patrick
T1  - Rapid assessment of the stability of DNA duplexes by impedimetric real-time monitoring of chemically induced denaturation
JF  - Lab on a Chip
Y1  - 2011
SN  - 1473-0197
VL  - 11
IS  - 9
SP  - 1656
EP  - 1663
PB  - Royal Society of Chemistry (RSC)
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Murib, M. S.
A1  - Grinsven, B. van
A1  - Grieten, L.
A1  - Janssens, S. D.
A1  - Vermeeren, V.
A1  - Eersels, K.
A1  - Broeders, J.
A1  - Ameloot, Marcel
A1  - Michiels, L.
A1  - Ceuninck, W. De
A1  - Haenen, K.
A1  - Schöning, Michael Josef
A1  - Wagner, Patrick
T1  - Electronic monitoring of chemical DNA denaturation on nanocrystalline diamond electrodes with different molarities and flow rates
JF  - Physica Status Solidi (A). Vol. 210 (2013), iss. 5
Y1  - 2013
SN  - 0031-8965
SP  - 911
EP  - 917
PB  - Wiley-VCH
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Murib, M. S.
A1  - Yeap, W. S.
A1  - Eurlings, Y.
A1  - Grinsven, B. van
A1  - Boyen, H.-G.
A1  - Conings, B.
A1  - Michiels, L.
A1  - Ameloot, Marcel
A1  - Carleer, R.
A1  - Warmer, J.
A1  - Kaul, P.
A1  - Haenen, K.
A1  - Schöning, Michael Josef
A1  - Ceuninck, W. de
A1  - Wagner, P.
T1  - Heat-transfer based characterization of DNA on synthetic sapphire chips
JF  - Sensors and Actuators B: Chemical
N2  - In this study, we show that synthetic sapphire (Al₂O₃), an established implant material, can also serve as a platform material for biosensors comparable to nanocrystalline diamond. Sapphire chips, beads, and powder were first modified with (3-aminopropyl) triethoxysilane (APTES), followed by succinic anhydride (SA), and finally single-stranded probe DNA was EDC coupled to the functionalized layer. The presence of the APTES-SA layer on sapphire powders was confirmed by thermogravimetric analyis and Fourier-transform infrared spectroscopy. Using planar sapphire chips as substrates and X-ray photoelectron spectroscopy (XPS) as surface-sensitive tool, the sequence of individual layers was analyzed with respect to their chemical state, enabling the quantification of areal densities of the involved molecular units. Fluorescence microscopy was used to demonstrate the hybridization of fluorescently tagged target DNA to the probe DNA, including denaturation- and re-hybridization experiments. Due to its high thermal conductivity, synthetic sapphire is especially suitable as a chip material for the heat-transfer method, which was employed to distinguish complementary- and non-complementary DNA duplexes containing single-nucleotide polymorphisms. These results indicate that it is possible to detect mutations electronically with a chemically resilient and electrically insulating chip material.
Y1  - 2016
U6  - https://doi.org/10.1016/j.snb.2016.02.027
SN  - 0925-4005
VL  - 230
IS  - 230
SP  - 260
EP  - 271
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Maurer, Florian
A1  - Miskiw, Kim K.
A1  - Acosta, Rebeca Ramirez
A1  - Harder, Nick
A1  - Sander, Volker
A1  - Lehnhoff, Sebastian
ED  - Jorgensen, Bo Norregaard
ED  - Pereira da Silva, Luiz Carlos
ED  - Ma, Zheng
T1  - Market abstraction of energy markets and policies - application in an agent-based modeling toolbox
T2  - EI.A 2023: Energy Informatics
N2  - In light of emerging challenges in energy systems, markets are prone to changing dynamics and market design. Simulation models are commonly used to understand the changing dynamics of future electricity markets. However, existing market models were often created with specific use cases in mind, which limits their flexibility and usability. This can impose challenges for using a single model to compare different market designs. This paper introduces a new method of defining market designs for energy market simulations. The proposed concept makes it easy to incorporate different market designs into electricity market models by using relevant parameters derived from analyzing existing simulation tools, morphological categorization and ontologies. These parameters are then used to derive a market abstraction and integrate it into an agent-based simulation framework, allowing for a unified analysis of diverse market designs. Furthermore, we showcase the usability of integrating new types of long-term contracts and over-the-counter trading. To validate this approach, two case studies are demonstrated: a pay-as-clear market and a pay-as-bid long-term market. These examples demonstrate the capabilities of the proposed framework.
KW  - Energy market design
KW  - Agent-based simulation
KW  - Market modeling
Y1  - 2023
SN  - 978-3-031-48651-7 (Print)
SN  - 978-3-031-48652-4 (eBook)
U6  - https://doi.org/10.1007/978-3-031-48652-4_10
N1  - Third Energy Informatics Academy Conference, EI.A 2023, Campinas, Brazil, December 6–8, 2023
N1  - Part of the Lecture Notes in Computer Science book series (LNCS,volume 14468).
SP  - 139
EP  - 157
PB  - Springer
CY  - Cham
ER  -