TY  - JOUR
A1  - Butenweg, Christoph
A1  - Marinković, Marko
A1  - Fehling, Ekkehard
A1  - Pfetzing, Thomas
T1  - Stahlbetonrahmentragwerke mit Ausfachungen aus Mauerwerk unter kombinierten seismischen Belastungen in und senkrecht zur Wandebene
JF  - Bauingenieur
Y1  - 2018
SN  - 0005-6650
N1  - Der Artikel befindet sich in der Beilage "D–A–CH – Mitteilungsblatt – Erdbebeningenieurwesen und Baudynamik" (ISSN 1434–6591)
VL  - 93
SP  - 2
EP  - 10
PB  - VDI Fachmedien
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
T1  - Die neue Erdbebenfibel. Neue Hilfsmittel für die Leichtbetonindustrie
JF  - Tagungsband 61. Ulmer Beton Tage 2017
Y1  - 2017
ER  - 
TY  - CHAP
A1  - Rajan, Sreelakshmy
A1  - Holtschoppen, B.
A1  - Dalguer, L. A.
A1  - Klinkel, S.
A1  - Butenweg, Christoph
ED  - Sas, P.
T1  - Seismic fragility analysis of a non-conventional reinforced concrete structure considering different uncertainties
T2  - Proceedings of ISMA2016, International Conference on Noise and Vibration Engineering/USD2016, International Conference on Uncertainty in Structural Dynamics, / ISMA 2016, USD 2016
Y1  - 2016
SP  - 4213
EP  - 4225
PB  - KU Leuven
CY  - Leuven
ER  - 
TY  - CHAP
A1  - Rajan, S.
A1  - Butenweg, Christoph
A1  - Dalguer, L. A.
A1  - An, J. H.
A1  - Renault, P.
A1  - Klinkel, S.
T1  - Fragility curves for a three-storey reinforced concrete test structure of the international benchmark SMART 2013
T2  - 16th World Conference on Earthquake, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017
Y1  - 2017
N1  - Paper No 2119
PB  - Chilean Association on Seismology and Earthquake Engineering (ACHISINA)
ER  - 
TY  - JOUR
A1  - Becker, Meike
A1  - Frauenrath, Tobias
A1  - Hezel, Fabian
A1  - Krombach, Gabriele A.
A1  - Kremer, Ute
A1  - Koppers, Benedikt
A1  - Butenweg, Christoph
A1  - Goemmel, Andreas
A1  - Utting, Jane F.
A1  - Schulz-Menger, Jeanette
A1  - Niendorf, Thoralf
T1  - Comparison of left ventricular function assessment using phonocardiogram- and electrocardiogram-triggered 2D SSFP CINE MR imaging at 1.5 T and 3.0 T
JF  - European Radiology
N2  - Objective: As high-field cardiac MRI (CMR) becomes more widespread the propensity of ECG to interference from electromagnetic fields (EMF) and to magneto-hydrodynamic (MHD) effects increases and with it the motivation for a CMR triggering alternative. This study explores the suitability of acoustic cardiac triggering (ACT) for left ventricular (LV) function assessment in healthy subjects (n=14). Methods: Quantitative analysis of 2D CINE steady-state free precession (SSFP) images was conducted to compare ACT’s performance with vector ECG (VCG). Endocardial border sharpness (EBS) was examined paralleled by quantitative LV function assessment. Results: Unlike VCG, ACT provided signal traces free of interference from EMF or MHD effects. In the case of correct Rwave recognition, VCG-triggered 2D CINE SSFP was immune to cardiac motion effects—even at 3.0 T. However, VCG-triggered 2D SSFP CINE imaging was prone to cardiac motion and EBS degradation if R-wave misregistration occurred. ACT-triggered acquisitions yielded LV parameters (end-diastolic volume (EDV), endsystolic volume (ESV), stroke volume (SV), ejection fraction (EF) and left ventricular mass (LVM)) comparable with those derived fromVCG-triggered acquisitions (1.5 T: ESVVCG=(56± 17) ml, EDVVCG=(151±32)ml, LVMVCG=(97±27) g, SVVCG=(94± 19)ml, EFVCG=(63±5)% cf. ESVACT= (56±18) ml, EDVACT=(147±36) ml, LVMACT=(102±29) g, SVACT=(91± 22) ml, EFACT=(62±6)%; 3.0 T: ESVVCG=(55±21) ml, EDVVCG=(151±32) ml, LVMVCG=(101±27) g, SVVCG=(96±15) ml, EFVCG=(65±7)% cf. ESVACT=(54±20) ml, EDVACT=(146±35) ml, LVMACT= (101±30) g, SVACT=(92±17) ml, EFACT=(64±6)%). Conclusions: ACT’s intrinsic insensitivity to interference from electromagnetic fields renders
KW  - Magnetic resonance imaging (MRI)
KW  - MR-stethoscope
KW  - Magnetic field strength
KW  - Left ventriular function
KW  - Cardiovascular MRI
Y1  - 2010
U6  - http://dx.doi.org/10.1007/s00330-009-1676-z
SN  - 1432-1084 (Onlineausgabe)
SN  - 0938-7994 (Druckausgabe)
VL  - 20
SP  - 1344
EP  - 1355
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Mistler, M.
A1  - Butenweg, Christoph
A1  - Anthoine, A.
T1  - Evaluation of the failure criterion for masonry by homogenisation
T2  - Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping and C.A. Mota Soares
Y1  - 2004
SN  - 0-948749-95-4
U6  - http://dx.doi.org/10.4203/ccp.79.201
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
A1  - Meyer, Udo
T1  - Erdbebenbemessung bei Mauerwerksbauten
T2  - Mauerwerk Kalender 2021: Kunststoffverankerungen Digitalisierung im Mauerwerksbau
N2  - Der vorliegende Beitrag stellt den seismischen Nachweis von Mauerwerksbauten in Deutschland auf Grundlage der DIN EN 1998‐1/NA vor, wobei auch die wesentlichen Änderungen zu der Norm DIN 4149 vergleichend erläutert werden. Vorgestellt werden die Definition der Erdbebeneinwirkung, das seismische Verhalten von Mauerwerksbauten und die Erläuterung der Rechenverfahren. Darauf aufbauend wird die Anwendung an drei Praxisbeispielen demonstriert.
Y1  - 2021
SN  - 9783433032930
SN  - 9783433610732
U6  - http://dx.doi.org/10.1002/9783433610732.ch12
SP  - 329
EP  - 355
PB  - Ernst & Sohn
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Weber, Felix
A1  - Bomholt, Frederik
A1  - Butenweg, Christoph
ED  - Bergmeister, Konrad
ED  - Fingerloos, Frank
ED  - Wörner, Johann-Dietrich
T1  - Erdbeben- und Schwingungsschutz von Bauwerken
T2  - 2023 BetonKalender: Wasserundurchlässiger Beton, Brückenbau
N2  - Dieser Beitrag beschreibt die herkömmlichen Maßnahmen wie die Kapazitätsbemessung der Tragwerksstruktur, die Isolation des Bauwerks mittels Basisisolatoren, die Dämpfungserhöhung der Struktur mittels Inter-Story-Dämpfern und die Schwingungsreduktion mittels Schwingungstilgern gegen Einwirkungen durch Erdbeben, Wind, Verkehr und Personen auf die Bauwerke. Ergänzend wird die erdbebengerechte Auslegung und Isolation von nichttragenden Bauteilen behandelt. Für die betrachteten Systeme werden die Bewegungsdifferenzialgleichungen unter Berücksichtigung der wesentlichen Nichtlinearitäten angegeben. Die vorgestellten Weiterentwicklungen in den Bereichen der Basisisolatoren, Dämpfern und Schwingungstilgern zeigen, dass das modellbasierte Design mittels Simulation ein sehr effektives, ökonomisches und dank der heutigen Computerleistung auch zeiteffizientes Werkzeug darstellt.
Y1  - 2022
SN  - 9783433611180
SN  - 9783433033753
U6  - http://dx.doi.org/10.1002/9783433611180.ch16
N1  - Beton-Kalender, 112. Jahrgang (2023): Wasserundurchlässiger Beton, Brückenbau ausleihbar unter der Sig. 11 XCF 3-2023,2
SP  - 779
EP  - 859
PB  - Ernst & Sohn
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Gkatzogias, Konstantinos
A1  - Veljkoviv, Ana
A1  - Pohoryles, Daniel A.
A1  - Tsionis, Georgios
A1  - Bournas, Dionysios A.
A1  - Crowley, Helen
A1  - Norlén, Hedvig
A1  - Butenweg, Christoph
A1  - Gervasio, Helena
A1  - Manfredi, Vincenzo
A1  - Masi, Angelo
A1  - Zaharieva, Roumiana
ED  - Gkatzogias, Konstantinos
ED  - Tsionis, Georgios
T1  - Policy practice and regional impact assessment for building renovation
T2  - REEBUILD Integrated Techniques for the Seismic Strengthening & Energy Efficiency of Existing Buildings
N2  - The work presented in this report provides scientific support to building renovation policies in the EU by promoting a holistic point of view on the topic. Integrated renovation can be seen as a nexus between European policies on disaster resilience, energy efficiency and circularity in the building sector. An overview of policy measures for the seismic and energy upgrading of buildings across EU Member States identified only a few available measures for combined upgrading. Regulatory framework, financial instruments and digital tools similar to those for energy renovation, together with awareness and training may promote integrated renovation. A framework for regional prioritisation of building renovation was put forward, considering seismic risk, energy efficiency, and socioeconomic vulnerability independently and in an integrated way. Results indicate that prioritisation of building renovation is a multidimensional problem. Depending on priorities, different integrated indicators should be used to inform policies and accomplish the highest relative or most spread impact across different sectors. The framework was further extended to assess the impact of renovation scenarios across the EU with a focus on priority regions. Integrated renovation can provide a risk-proofed, sustainable, and inclusive built environment, presenting an economic benefit in the order of magnitude of the highest benefit among the separate interventions. Furthermore, it presents the unique capability of reducing fatalities and energy consumption at the same time and, depending on the scenario, to a greater extent.
Y1  - 2022
SN  - 978-92-76-60454-9
U6  - http://dx.doi.org/10.2760/883122
SN  - 1831-9424
SP  - 1
EP  - 68
PB  - Publications Office of the European Union
CY  - Luxembourg
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
ED  - Vacareanu, Radu
ED  - Ionescu, Constantin
T1  - Seismic design and evaluation of industrial facilities
T2  - Progresses in European Earthquake Engineering and Seismology. Third European Conference on Earthquake Engineering and Seismology – Bucharest, 2022
N2  - Industrial facilities must be thoroughly designed to withstand seismic
actions as they exhibit an increased loss potential due to the possibly wideranging
damage consequences and the valuable process engineering equipment.
Past earthquakes showed the social and political consequences of seismic damage
to industrial facilities and sensitized the population and politicians worldwide
for the possible hazard emanating from industrial facilities. However, a holistic
approach for the seismic design of industrial facilities can presently neither be
found in national nor in international standards. The introduction of EN 1998-4
of the new generation of Eurocode 8 will improve the normative situation with
specific seismic design rules for silos, tanks and pipelines and secondary process
components. The article presents essential aspects of the seismic design of
industrial facilities based on the new generation of Eurocode 8 using the example
of tank structures and secondary process components. The interaction effects of
the process components with the primary structure are illustrated by means of
the experimental results of a shaking table test of a three story moment resisting
steel frame with different process components. Finally, an integrated approach of
digital plant models based on building information modelling (BIM) and structural
health monitoring (SHM) is presented, which provides not only a reliable
decision-making basis for operation, maintenance and repair but also an excellent
tool for rapid assessment of seismic damage.
KW  - Industrial facilities
KW  - Seismic design
KW  - Tanks
KW  - EN 1998-4
KW  - Structural health monitoring
Y1  - 2022
SN  - 978-3-031-15103-3
SN  - 978-3-031-15106-4
SN  - 978-3-031-15104-0
U6  - http://dx.doi.org/10.1007/978-3-031-15104-0
SN  - 2524-342X
SN  - 2524-3438
N1  - Third European Conference on Earthquake Engineering and Seismology. 04-09.09 Bucharest, Romania.
SP  - 449
EP  - 464
PB  - Springer
CY  - Cham
ER  -