TY  - JOUR
A1  - Vu, Duc-Khoi
A1  - Staat, Manfred
T1  - An algorithm for shakedown analysis of structure with temperature dependent yield stress
N2  - This work is an attempt to answer the question: How to use convex programming in shakedown analysis of structures made of materials with temperature-dependent properties. Based on recently established shakedown theorems and formulations, a dual relationship between upper and lower bounds of the shakedown limit load is found, an algorithmfor shakedown analysis is proposed. While the original problem is neither convex nor concave, the algorithm presented here has the advantage of employing convex programming tools.
KW  - Einspielen <Werkstoff>
KW  - Temperaturabhängigkeit
KW  - Fließgrenze
KW  - Shakedown
KW  - shakedown analysis
KW  - yield stress
Y1  - 2004
ER  - 
TY  - JOUR
A1  - Vu, Duc Khoi
A1  - Staat, Manfred
A1  - Tran, Ich Thinh
T1  - Analysis of pressure equipment by application of the primal-dual theory of shakedown
JF  - Communications in Numerical Methods in Engineering. 23 (2007), H. 3
Y1  - 2007
SN  - 1069-8299
SP  - 213
EP  - 225
ER  - 
TY  - JOUR
A1  - Vu, Duc Khoi
A1  - Staat, Manfred
T1  - Shakedown analysis of structures made of materials with temperature-dependent yield stress
JF  - International Journal of Solids and Structures. 44 (2007), H. 13
Y1  - 2007
SN  - 0020-7683
SP  - 4524
EP  - 4540
ER  - 
TY  - JOUR
A1  - Vant, Christianne
A1  - Staat, Manfred
A1  - Baroud, Gamal
T1  - Percutaneous Vertebroplasty: A Review of Two Intraoperative Complications
JF  - Bioengineering in Cell and Tissue Research / Artmann, Gerhard M. ; Chien, Shu (Eds.)
Y1  - 2008
SN  - 978-3-540-75408-4
SP  - 527
EP  - 539
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Uysal, Karya
A1  - Firat, Ipek Serat
A1  - Creutz, Till
A1  - Aydin, Inci Cansu
A1  - Artmann, Gerhard
A1  - Teusch, Nicole
A1  - Temiz Artmann, Aysegül
T1  - A novel in vitro wound healing assay using free-standing, ultra-thin PDMS membranes
JF  - membranes
N2  - Advances in polymer science have significantly increased polymer applications in life sciences. We report the use of free-standing, ultra-thin polydimethylsiloxane (PDMS) membranes, called CellDrum, as cell culture substrates for an in vitro wound model. Dermal fibroblast monolayers from 28- and 88-year-old donors were cultured on CellDrums. By using stainless steel balls, circular cell-free areas were created in the cell layer (wounding). Sinusoidal strain of 1 Hz, 5% strain, was applied to membranes for 30 min in 4 sessions. The gap circumference and closure rate of un-stretched samples (controls) and stretched samples were monitored over 4 days to investigate the effects of donor age and mechanical strain on wound closure. A significant decrease in gap circumference and an increase in gap closure rate were observed in trained samples from younger donors and control samples from older donors. In contrast, a significant decrease in gap closure rate and an increase in wound circumference were observed in the trained samples from older donors. Through these results, we propose the model of a cell monolayer on stretchable CellDrums as a practical tool for wound healing research. The combination of biomechanical cell loading in conjunction with analyses such as gene/protein expression seems promising beyond the scope published here.
Y1  - 2022
U6  - http://dx.doi.org/10.3390/membranes13010022
N1  - This article belongs to the Special Issue "Latest Scientific Discoveries in Polymer Membranes"
VL  - 2023
IS  - 13(1)
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Uysal, Karya
A1  - Creutz, Till
A1  - Firat, Ipek Seda
A1  - Artmann, Gerhard
A1  - Teusch, Nicole
A1  - Temiz Artmann, Aysegül
T1  - Bio-functionalized ultra-thin, large-area and waterproof silicone membranes for biomechanical cellular loading and compliance experiments
JF  - Polymers
N2  - Biocompatibility, flexibility and durability make polydimethylsiloxane (PDMS) membranes top candidates in biomedical applications. CellDrum technology uses large area, <10 µm thin membranes as mechanical stress sensors of thin cell layers. For this to be successful, the properties (thickness, temperature, dust, wrinkles, etc.) must be precisely controlled. The following parameters of membrane fabrication by means of the Floating-on-Water (FoW) method were investigated: (1) PDMS volume, (2) ambient temperature, (3) membrane deflection and (4) membrane mechanical compliance. Significant differences were found between all PDMS volumes and thicknesses tested (p < 0.01). They also differed from the calculated values. At room temperatures between 22 and 26 °C, significant differences in average thickness values were found, as well as a continuous decrease in thicknesses within a 4 °C temperature elevation. No correlation was found between the membrane thickness groups (between 3–4 µm) in terms of deflection and compliance. We successfully present a fabrication method for thin bio-functionalized membranes in conjunction with a four-step quality management system. The results highlight the importance of tight regulation of production parameters through quality control. The use of membranes described here could also become the basis for material testing on thin, viscous layers such as polymers, dyes and adhesives, which goes far beyond biological applications.
Y1  - 2022
SN  - 2073-4360
VL  - 14
IS  - 11
SP  - 2213
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Ullrich, Sebastian
A1  - Grottke, Oliver
A1  - Rossaint, Rolf
A1  - Staat, Manfred
A1  - Deserno, Thomas M.
A1  - Kuhlen, Torsten
T1  - Virtual Needle Simulation with Haptics for Regional Anaesthesia
Y1  - 2010
N1  - IEEE Virtual Reality 2010, Workshop on Medical Virtual Environments, Waltham, MA, USA, March 21, 2010
SP  - 1
EP  - 3
ER  - 
TY  - JOUR
A1  - Turlybekuly, Amanzhol
A1  - Pogrebnjak, Alexander
A1  - Sukhodub, L. F.
A1  - Sukhodub, Liudmyla B.
A1  - Kistaubayeva, A. S.
A1  - Savitskaya, Irina
A1  - Shokatayeva, D. H.
A1  - Bondar, Oleksandr V.
A1  - Shaimardanov, Z. K.
A1  - Plotnikov, Sergey V.
A1  - Shaimardanova, B. H.
A1  - Digel, Ilya
T1  - Synthesis, characterization, in vitro biocompatibility and antibacterial properties study of nanocomposite materials based on hydroxyapatite-biphasic ZnO micro- and nanoparticles embedded in Alginate matrix
JF  - Materials Science and Engineering C
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.msec.2019.109965
VL  - 104
IS  - Article number 109965
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Turaliyeva, M.
A1  - Yeshibaev, A.
A1  - Saparbekova, A.
A1  - Akynova, L.
A1  - Abildayeva, R.
A1  - Sadenova, M.
A1  - Sartayeva, K.
A1  - Schieffer, Andre
A1  - Digel, Ilya
T1  - Species composition and injuriousness of stranger xylophilous fauna affecting indigenous urban dendroflora of Central Asia
JF  - Asian journal of microbiology, biotechnology & environmental sciences : AJMBES
N2  - At the present time, one of the most serious environmental problems of Central Asia and South Kazakhstan is the ongoing large-scale deterioration of principal urban tree populations. Several major centers of massive spread of invasive plant pests have been found in urban dendroflora of this region. The degree of damage of seven most wide-spread aboriginal tree species was found to range from 21.4±1.1 to 85.4±1.8%. In particular, the integrity of the native communities of sycamore (Platanus spp.), willow (Salix spp.), poplar (Populus spp.) and elm (Ulmus spp.) is highly endangered. Our taxonomic analysis of the most dangerous tree pests of the region has revealed them as neobiontic xylophilous insects such as Cossus cossus L. (Order: Lepidoptera L.) Monochamus urussovi Fisch., Monochamus sutor L., Acanthocinus aedelis L. and Ñetonia aureate L. (Order: Coleoptera L.). We relate the origin of this threatening trend with the import of industrial wood in the mid 90’s of the last century that was associated with high degree of the constructional work in the region. Because of the absence of efficient natural predators of the pest species, the application of microbiological methods of the pest control and limitation is suggested.
Y1  - 2016
SN  - 0972-3005
VL  - 18
IS  - 2
SP  - 359
EP  - 366
PB  - EM International
ER  - 
TY  - JOUR
A1  - Turaliyeva, M.
A1  - Yeshibaev, A.
A1  - Digel, Ilya
A1  - Elibayeva, G.
A1  - Sydykova, A.
A1  - Uspabayeva, A.
A1  - Dosybayeva, G.
A1  - Zhylysbayeva, A.
A1  - Lakhanova, K.
T1  - Molecular-genetic identification of emerged novel invasive pathogens of Asiatic Elm Ulmus pumila L
JF  - Life science journal
N2  - The dwarf elm Ulmus pumila L. (Ulmaceae) is one of indigenous species of flora in Kazakhstan and forms a basis of dendroflora in virtually all settlements of the region. In the past decade, multiple outbreaks of previously unknown diseases of the small-leaved elm have been registered. In our study, by the molecular-genetic analysis it was found that the pathogens responsible for the outbreaks are microfungi belonging to the genus Fusarium – F. solani and F. oxysporum. The nucleotide sequences (ITS regions) isolated from the diseased trees showed very high similarity with the GenBank control numbers EU625403.1 and FJ478128.1 (100.0 and 99.0 % respectively). Oncoming research will focus on the search of natural microbial antagonists of the discovered phytopathogens.
Y1  - 2014
U6  - http://dx.doi.org/10.7537/marslsj1105s14.33
SN  - 1097-8135
VL  - 11
IS  - Spec. iss. 5s
SP  - 171
EP  - 175
PB  - Marsland Press
CY  - New York
ER  -