TY  - JOUR
A1  - Miyamato, Ko-ichiro
A1  - Sakakita, Sakura
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Application of chemical imaging sensor to in-situ pH imaging in the vicinity of a corroding metal surface
JF  - Electrochimica Acta
N2  - The chemical imaging sensor was applied to in-situ pH imaging of the solution in the vicinity of a corroding surface of stainless steel under potentiostatic polarization. A test piece of polished stainless steel was placed on the sensing surface leaving a narrow gap filled with artificial seawater and the stainless steel was corroded under polarization. The pH images obtained during polarization showed correspondence between the region of lower pH and the site of corrosion. It was also found that the pH value in the gap became as low as 2 by polarization, which triggered corrosion.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.electacta.2015.07.184
SN  - 0013-4686
VL  - 183
SP  - 137
EP  - 142
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Vahidpour, Farnoosh
A1  - Guthman, Eric
A1  - Arreola, Julia
A1  - Alghazali, Yousef H. M.
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Assessment of Various Process Parameters for Optimized Sterilization Conditions Using a Multi-Sensing Platform
JF  - Foods
N2  - In this study, an online multi-sensing platform was engineered to simultaneously evaluate various process parameters of food package sterilization using gaseous hydrogen peroxide (H₂O₂). The platform enabled the validation of critical aseptic parameters. In parallel, one series of microbiological count reduction tests was performed using highly resistant spores of B. atrophaeus DSM 675 to act as the reference method for sterility validation. By means of the multi-sensing platform together with microbiological tests, we examined sterilization process parameters to define the most effective conditions with regards to the highest spore kill rate necessary for aseptic packaging. As these parameters are mutually associated, a correlation between different factors was elaborated. The resulting correlation indicated the need for specific conditions regarding the applied H₂O₂ gas temperature, the gas flow and concentration, the relative humidity and the exposure time. Finally, the novel multi-sensing platform together with the mobile electronic readout setup allowed for the online and on-site monitoring of the sterilization process, selecting the best conditions for sterility and, at the same time, reducing the use of the time-consuming and costly microbiological tests that are currently used in the food package industry.
KW  - spore kill rate
KW  - sterility
KW  - aseptic parameters
KW  - multi-sensing platform
KW  - gaseous hydrogen peroxide
Y1  - 2022
U6  - http://dx.doi.org/10.3390/foods11050660
SN  - 2304-8158
N1  - This article belongs to the Special Issue "Sensors and Biosensors Application for Food Industries"
VL  - 11
IS  - 5
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Werner, Frederik
A1  - Groebel, Simone
A1  - Schuhmacher, K.
A1  - Spelthahn, Heiko
A1  - Wagner, Torsten
A1  - Selmer, Thorsten
A1  - Baumann, Marcus
A1  - Schöning, Michael Josef
T1  - Bestimmung der metabolischen Aktivität von Mikroorganismen während des Biogasbildungsprozesses
JF  - 9. Dresdner Sensor-Symposium : Dresden, 07.-09. Dezember 2009 / Gerlach, Gerald ; Hauptmann, Peter [Hrsg.]
Y1  - 2009
SN  - 978-3-941298-44-6
N1  - Dresdner Sensor-Symposium ; (9, 2009, Dresden)
SP  - 201
EP  - 204
PB  - TUDpress
CY  - Dresden
ER  - 
TY  - JOUR
A1  - Jablonski, Melanie
A1  - Münstermann, Felix
A1  - Nork, Jasmina
A1  - Molinnus, Denise
A1  - Muschallik, Lukas
A1  - Bongaerts, Johannes
A1  - Wagner, Torsten
A1  - Keusgen, Michael
A1  - Siegert, Petra
A1  - Schöning, Michael Josef
T1  - Capacitive field‐effect biosensor applied for the detection of acetoin in alcoholic beverages and fermentation broths
JF  - physica status solidi (a) applications and materials science
N2  - An acetoin biosensor based on a capacitive electrolyte–insulator–semiconductor (EIS) structure modified with the enzyme acetoin reductase, also known as butane-2,3-diol dehydrogenase (Bacillus clausii DSM 8716ᵀ), is applied for acetoin detection in beer, red wine, and fermentation broth samples for the first time. The EIS sensor consists of an Al/p-Si/SiO₂/Ta₂O₅ layer structure with immobilized acetoin reductase on top of the Ta₂O₅ transducer layer by means of crosslinking via glutaraldehyde. The unmodified and enzyme-modified sensors are electrochemically characterized by means of leakage current, capacitance–voltage, and constant capacitance methods, respectively.
KW  - acetoin
KW  - acetoin reductase
KW  - alcoholic beverages
KW  - biosensors
KW  - capacitive field-effect sensors
Y1  - 2021
U6  - http://dx.doi.org/10.1002/pssa.202000765
SN  - 1862-6319
VL  - 218
IS  - 13
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Miyamoto, K.
A1  - Kuwabara, Yohei
A1  - Kanoh, Shin'ichiro
A1  - Yoshinobu, Tatsuo
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Chemical image scanner based on FDM-LAPS
JF  - Sensors and Actuators B: Chemical. 137 (2009), H. 2
Y1  - 2009
SN  - 0925-4005
SP  - 533
EP  - 538
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamoto, K.
A1  - Ichimura, H.
A1  - Wagner, Torsten
A1  - Yoshinobu, T.
A1  - Schöning, Michael Josef
T1  - Chemical Imaging of ion Diffusion in a Microfluidic Channel
JF  - Procedia Engineering
N2  - The chemical imaging sensor is a chemical sensor which is capable of visualizing the spatial distribution of chemical species in sample solution. In this study, a novel measurement system based on the chemical imaging sensor was developed to observe the inside of a Y-shaped microfluidic channel while injecting two sample solutions from two branches. From the collected chemical images, it was clearly observed that the injected solutions formed laminar flows in the microfluidic channel. In addition, ion diffusion across the laminar flows was observed. This label-free method can acquire quantitative data of ion distribution and diffusion in microfluidic devices, which can be used to determine the diffusion coefficients, and therefore, the molecular weights of chemical species in the sample solution.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.proeng.2012.09.289
SN  - 1877-7058
N1  - Part of special issue "26th European Conference on Solid-State Transducers, EUROSENSOR 2012"
IS  - 47
SP  - 886
EP  - 889
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamoto, Ko-ichiro
A1  - Ichimura, Hiroki
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Chemical imaging of the concentration profile of ion diffusion in a microfluidic channel
JF  - Sensors and actuators. B: Chemical
N2  - The chemical imaging sensor is a device to visualize the spatial distribution of chemical species based on the principle of LAPS (light-addressable potentiometric sensor), which is a field-effect chemical sensor based on semiconductor. In this study, the chemical imaging sensor has been applied to investigate the ion profile of laminar flows in a microfluidic channel. The chemical images (pH maps) were collected in a Y-shaped microfluidic channel while injecting HCl and NaCl solutions into two branches. From the chemical images, it was clearly observed that the injected solutions formed laminar flows in the channel. In addition, ion diffusion across the laminar flows was observed, and the diffusion coefficient could be derived by fitting the pH profiles to the Fick's equation.
Y1  - 2013
U6  - http://dx.doi.org/10.1016/j.snb.2013.04.057
SN  - 1873-3077 (E-Journal); 0925-4005 (Print)
N1  - Part of special issue "Selected Papers from the 26th European Conference on Solid-State Transducers"
VL  - 189
SP  - 240
EP  - 245
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Rao, C.
A1  - Otto, R.
A1  - Yoshinobu, T.
A1  - Kloock, Joachim P.
A1  - Schöning, Michael Josef
T1  - Chipkarten-basierter Multikanal lichtadressierbarer potentiometrischer Sensor für analytische Anwendungen in flüssigen Medien
JF  - Neue Herausforderungen und Anwendungen in der Sensortechnik : 7. Dresdner Sensor-Symposium ; 12. - 14. Dezember 2005, Dresden / [Forschungsgesellschaft für Messtechnik, Sensorik und Medizintechnik e.V.]. Gerald Gerlach ... (Hg.)
Y1  - 2005
SN  - 3-938863-29-3
N1  - Dresdner Beiträge zur Sensorik ; 24
SP  - 11
EP  - 14
PB  - TUDpress
CY  - Dresden
ER  - 
TY  - JOUR
A1  - Arreola, Julio
A1  - Keusgen, Michael
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Combined calorimetric gas- and spore-based biosensor array for online monitoring and sterility assurance of gaseous hydrogen peroxide in aseptic filling machines
JF  - Biosensors and Bioelectronics
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.bios.2019.111628
SN  - 0956-5663
VL  - 143
IS  - 111628
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamoto, Ko-ichiro
A1  - Wagner, Torsten
A1  - Mimura, Shuhei
A1  - Kanoh, Shin`ichiro
A1  - Yoshinobu, Tatsuo
A1  - Schöning, Michael Josef
T1  - Constant-phase-mode operation of the light-addressable potentiometric sensor
JF  - Procedia Chemistry. 1 (2009), H. 1
Y1  - 2009
SN  - 1876-6196
N1  - Proceedings of the Eurosensors XXIII conference ; Eurosensors 23
SP  - 1487
EP  - 1490
PB  - Elsevier
CY  - Amsterdam
ER  -