TY  - JOUR
A1  - Blome, Hans-Joachim
T1  - Die Entstehung des Kosmos - Vom Anfang der Welt bis zum komplexen Universum
JF  - Homo spaciens - der Mensch im Kosmos : ein interdisziplinärer Ausblick auf Ursprung und Zukunft des Menschen im All ; Berichtsband der Tagung "Mensch im Kosmos IV" vom 14. - 16.10.2004 auf Schloß Theuern/Oberpfalz / P. R. Sahm, ...  Hans-Joachim Blome(Hrsg.)
Y1  - 2005
SN  - 3-9807330-8-4
N1  - Tagung Mensch im Kosmos (4, 2004, Theuern, Kümmersbruck)
PB  - Discorsi
CY  - Hamburg
ER  - 
TY  - JOUR
A1  - Gerhardt, Hans Joachim
T1  - Die Bestimmung der Windbelastung von Bauwerken im Windkanal
JF  - Der Prüfingenieur (1998)
Y1  - 1998
SP  - 31
EP  - 45
ER  - 
TY  - JOUR
A1  - Hailer, Benjamin
A1  - Weber, Tobias
A1  - Neveling, Sebastian
A1  - Dera, Samuel
A1  - Arent, Jan-Christoph
A1  - Middendorf, Peter
T1  - Development of a test device to determine the frictional behavior between honeycomb and prepreg layers under realistic manufacturing conditions
JF  - Journal of Sandwich Structures & Materials
N2  - In the friction tests between honeycomb with film adhesive and prepreg, the relative displacement occurs between the film adhesive and the prepreg. The film adhesive does not shift relative to the honeycomb. This is consistent with the core crush behavior where the honeycomb moves together with the film adhesive, as can be seen in Figure 2(a). The pull-through forces of the friction measurements between honeycomb and prepreg at 1 mm deformation are plotted in Figure 17(a). While the friction at 100°C is similar to the friction at 120°C, it decreases significantly at 130°C and exhibits a minimum at 140°C. At 150°C, the friction rises again slightly and then sharply at 160°C. Since the viscosity of the M18/1 prepreg resin drops significantly before it cures [23], the minimum friction at 140°C could result from a minimum viscosity of the mixture of prepreg resin and film adhesive before the bond subsequently cures. Figure 17(b) shows the mean value curve of the friction measurements at 140°C. The error bars, which represent the standard deviation, reveal the good repeatability of the tests. The force curve is approximately horizontal between 1 mm and 2 mm. The friction then slightly rises. As with interlaminar friction measurements, this could be due to the fact that resin is removed by friction and the proportion of boundary lubrication increases. Figure 18 shows the surfaces after the friction measurement. The honeycomb cell walls are clearly visible in the film adhesive. There are areas where the film adhesive is completely removed and the carrier material of the film adhesive becomes visible. In addition, the viscosity of the resin changes as the curing progresses during the friction test. This can also affect the force-displacement curve.
Y1  - 2020
U6  - http://dx.doi.org/10.1177/1099636220923986
SN  - 1530-7972
IS  - Volume 23, Issue 7
SP  - 3017
EP  - 3043
PB  - Sage
CY  - London
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Robinson, A. E.
T1  - Development of a new test rig for a micro scale hydrogen combustion chamber
JF  - Proceedings of the 2nd European Conference for Aero-Space Sciences : July 1 - 6, 2007, Brussels, Belgium
Y1  - 2007
N1  - European Conference for Aerospace Sciences <2, 2007, Brüssel> ; EUCASS <2, 2007, Brüssel> ; Paper No. 22
SP  - 1
EP  - 8
PB  - -
ER  - 
TY  - JOUR
A1  - Robinson, A. E.
A1  - Funke, Harald
A1  - Hendrick, P.
A1  - Recker, E.
A1  - Peirs, J.
T1  - Development of a hydrogen fuelled 1 kW ultra micro gas turbine with special respect to designing, testing and mapping of the µ-scale combustor
JF  - IEEE International Conference on Sustainable Energy Technologies, 2008 : ICSET 2008 ; Singapore, 24 - 27 Nov. 2008.
Y1  - 2008
SN  - 978-1-4244-1887-9
SP  - 656
EP  - 660
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Trilla, Joan
A1  - Grossen, Jürgen
A1  - Robinson, Alexander
A1  - Funke, Harald
A1  - Bosschaerts, Walter
A1  - Hendrick, Patrick
T1  - Development of a hydrogen combustion chamber for an ultra micro gas turbine
JF  - PowerMEMS 2008, 8th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, microEMS 2008, 2nd Symposium on Micro Environmental Machine Systems, Sendai, JP, Nov 9-12, 2008
Y1  - 2008
SP  - 101
EP  - 104
ER  - 
TY  - JOUR
A1  - Seifarth, Volker
A1  - Goßmann, Matthias
A1  - Grosse, J. O.
A1  - Becker, C.
A1  - Heschel, I.
A1  - Artmann, Gerhard
A1  - Temiz Artmann, Aysegül
T1  - Development of a Bioreactor to Culture Tissue Engineered Ureters Based on the Application of Tubular OPTIMAIX 3D Scaffolds
JF  - Urologia Internationalis
Y1  - 2015
U6  - http://dx.doi.org/10.1159/000368419
SN  - 0042-1138
VL  - 2015
IS  - 95
SP  - 106
EP  - 113
PB  - Karger
CY  - Basel
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, K.
A1  - Haj Ayed, A.
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Development and Testing of a Low NOX Micromix Combustion Chamber for an Industrial Gas Turbine
JF  - International Journal of Gas Turbine, Propulsion and Power Systems
N2  - The Micromix combustion principle, based on cross-flow mixing of air and hydrogen, promises low emission applications in future gas turbines. The Micromix combustion takes place in several hundreds of miniaturized diffusion-type micro-flames. The major advantage is the inherent safety against flash-back and low NOx-emissions due to a very short residence time of reactants in the flame region. The paper gives insight into the Micromix design and scaling procedure for different energy densities and the interaction of scaling laws and key design drivers in gas turbine integration. Numerical studies, experimental testing, gas turbine integration and interface considerations are evaluated. The aerodynamic stabilization of the miniaturized flamelets and the resulting flow field, flame structure and NOx formation are analysed experimentally and numerically. The results show and confirm the successful adaption of the low NOx Micromix characteristics for a range of different nozzle sizes, energy densities and thermal power output.
Y1  - 2017
U6  - http://dx.doi.org/10.38036/jgpp.9.1_27
SN  - 1882-5079
VL  - 9
IS  - 1
SP  - 27
EP  - 36
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Rönna, Uwe
A1  - Robinson, A. E.
T1  - Development and testing of a 10 kW diffusive micromix combustor for hydrogen-fuelled μ-scale gas turbines
JF  - Proceedings of ASME Turbo Expo 2008: Power for Land, Sea and Air ; GT2008 ; June 9-13, 2008, Berlin, Germany
Y1  - 2008
N1  - GT2008-50418
SP  - 1
EP  - 8
PB  - ASME
CY  - New York, NY
ER  - 
TY  - JOUR
A1  - Krämer, Stefan
A1  - Daab, Dominique Jonas
A1  - Müller, Brigitte
A1  - Wagner, Tobias
A1  - Baader, Fabian
A1  - Hessel, Joana
A1  - Gdalewitsch, Georg
A1  - Plescher, Engelbert
A1  - Dachwald, Bernd
A1  - Wahle, Michael
A1  - Gierse, Andreas
A1  - Vetter, Rudolf
A1  - Pfützenreuter, Lysan
T1  - Development and flight-testing of a system to isolate vibrations for microgravity experiments on sounding rockets
JF  - 21st ESA Symposium on Rocket and Balloon Research
Y1  - 2013
SP  - 1
EP  - 8
ER  -