TY  - JOUR
A1  - Pilas, Johanna
A1  - Yazici, Y.
A1  - Selmer, Thorsten
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Application of a portable multi-analyte biosensor for organic acid determination in silage
JF  - Sensors
N2  - Multi-analyte biosensors may offer the opportunity to perform cost-effective and rapid analysis with reduced sample volume, as compared to electrochemical biosensing of each analyte individually. This work describes the development of an enzyme-based biosensor system for multi-parametric determination of four different organic acids. The biosensor array comprises five working electrodes for simultaneous sensing of ethanol, formate, d-lactate, and l-lactate, and an integrated counter electrode. Storage stability of the biosensor was evaluated under different conditions (stored at +4 °C in buffer solution and dry at −21 °C, +4 °C, and room temperature) over a period of 140 days. After repeated and regular application, the individual sensing electrodes exhibited the best stability when stored at −21 °C. Furthermore, measurements in silage samples (maize and sugarcane silage) were conducted with the portable biosensor system. Comparison with a conventional photometric technique demonstrated successful employment for rapid monitoring of complex media.
Y1  - 2018
U6  - http://dx.doi.org/10.3390/s18051470
SN  - 1424-8220
VL  - 18
IS  - 5
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Yoshinobu, Tatsuo
A1  - Krause, Steffi
A1  - Miyamoto, Ko-ichiro
A1  - Werner, Frederik
A1  - Poghossian, Arshak
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - (Bio-)chemical Sensing and Imaging by LAPS and SPIM
T2  - Label-free biosensing: advanced materials, devices and applications
N2  - The light-addressable potentiometric sensor (LAPS) and scanning photo-induced impedance microscopy (SPIM) are two closely related methods to visualise the distributions of chemical species and impedance, respectively, at the interface between the sensing surface and the sample solution. They both have the same field-effect structure based on a semiconductor, which allows spatially resolved and label-free measurement of chemical species and impedance in the form of a photocurrent signal generated by a scanning light beam. In this article, the principles and various operation modes of LAPS and SPIM, functionalisation of the sensing surface for measuring various species, LAPS-based chemical imaging and high-resolution sensors based on silicon-on-sapphire substrates are described and discussed, focusing on their technical details and prospective applications.
KW  - Chemical imaging
KW  - Field-effect device
KW  - Light-addressable potentiometric sensor
KW  - Potentiometry
Y1  - 2018
SN  - 978-3-319-75219-8
SP  - 103
EP  - 132
PB  - Springer
CY  - Cham
ER  -