TY  - JOUR
A1  - Stadler, Andreas M.
A1  - Garvey, G. J.
A1  - Bocahut, A.
A1  - Sacquin-Mora, S.
A1  - Digel, Ilya
A1  - Schneider, G. J.
A1  - Natali, F.
A1  - Artmann, Gerhard
A1  - Zaccai, G.
T1  - Thermal fluctuations of haemoglobin from different species : adaptation to temperature via conformational dynamics
JF  - Journal of the Royal Society Interface
N2  - Thermodynamic stability, configurational motions and internal forces of haemoglobin (Hb) of three endotherms (platypus, Ornithorhynchus anatinus; domestic chicken, Gallus gallus domesticus and human, Homo sapiens) and an ectotherm (salt water crocodile, Crocodylus porosus) were investigated using circular dichroism, incoherent elastic neutron scattering and coarse-grained Brownian dynamics simulations. The experimental results from Hb solutions revealed a direct correlation between protein resilience, melting temperature and average body temperature of the different species on the 0.1 ns time scale. Molecular forces appeared to be adapted to permit conformational fluctuations with a root mean square displacement close to 1.2 Å at the corresponding average body temperature of the endotherms. Strong forces within crocodile Hb maintain the amplitudes of motion within a narrow limit over the entire temperature range in which the animal lives. In fully hydrated powder samples of human and chicken, Hb mean square displacements and effective force constants on the 1 ns time scale showed no differences over the whole temperature range from 10 to 300 K, in contrast to the solution case. A complementary result of the study, therefore, is that one hydration layer is not sufficient to activate all conformational fluctuations of Hb in the pico- to nanosecond time scale which might be relevant for biological function. Coarse-grained Brownian dynamics simulations permitted to explore residue-specific effects. They indicated that temperature sensing of human and chicken Hb occurs mainly at residues lining internal cavities in the β-subunits.
Y1  - 2012
U6  - https://doi.org/10.1098/rsif.2012.0364
SN  - 1742-5689
VL  - 9
IS  - 76
SP  - 2845
EP  - 2855
PB  - The Royal Society
CY  - London
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Mansurov, Zulkhair
A1  - Biisenbaev, Makhmut
A1  - Savitskaya, Irina
A1  - Kistaubaeva, Aida
A1  - Akimbekov, Nuraly S.
A1  - Zhubanova, Azhar
ED  - Hu, Ning
T1  - Heterogeneous Composites on the Basis of Microbial Cells and Nanostructured Carbonized Sorbents
T2  - Composites and Their Applications
N2  - The fact that microorganisms prefer to grow on liquid/solid phase surfaces rather than in the surrounding aqueous phase was noticed long time ago [1]. Virtually any surface – animal, mineral, or vegetable – is a subject for microbial colonization and subsequent biofilm formation. It would be adequate to name just a few notorious examples on microbial colonization of contact lenses, ship hulls, petroleum pipelines, rocks in streams and all kinds of biomedical implants. The propensity of microorganisms to become surface-bound is so profound and ubiquitous that it vindicates the advantages for attached forms over their free-ranging counterparts [2]. Indeed, from ecological and evolutionary standpoints, for many microorganisms the surface-bound state means dwelling in nutritionally favorable, non-hostile environments [3]. Therefore, in most of natural and artificial ecosystems surface-associated microorganisms vastly outnumber organisms in suspension and often organize into complex communities with features that differ dramatically from those of free cells [4].
Y1  - 2012
SN  - 978-953-51-0706-4
U6  - https://doi.org/10.5772/47796
SP  - 249
EP  - 272
PB  - Intech
CY  - London
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Nguyen, Nhu Huynh
A1  - Staat, Manfred
ED  - Eberhardsteiner, J.
T1  - Numerical stability enhancement of modeling hyperelastic materials
T2  - Proceedings European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)
Y1  - 2012
N1  - 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012
ER  - 
TY  - CHAP
A1  - Weil, M.
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Cherstvy, A.
T1  - Electrical monitoring of layer-by-layer adsorption of oppositely charged macromolecules by means of capacitive field-effect devices
Y1  - 2012
SN  - 978-3-9813484-2-2
U6  - https://doi.org/10.5162/IMCS2012/P2.5.2
SP  - 1575
EP  - 1578
ER  - 
TY  - JOUR
A1  - Hasan, Istabrak
A1  - Keil, Ludger
A1  - Staat, Manfred
A1  - Wahl, Gerhard
A1  - Bourauel, Christoph
T1  - Determination of the frictional coefficient of the implant-antler interface : experimental approach
JF  - Biomedical Engineering / Biomedizinische Technik
N2  - The similar bone structure of reindeer antler to human bone permits studying the osseointegration of dental implants in the jawbone. As the friction is one of the major factors that have a significant influence on the initial stability of immediately loaded dental implants, it is essential to define the frictional coefficient of the implant-antler interface. In this study, the kinetic frictional forces at the implant-antler interface were measured experimentally using an optomechanical setup and a stepping motor controller under different axial loads and sliding velocities. The corresponding mean values of the static and kinetic frictional coefficients were within the range of 0.5–0.7 and 0.3–0.5, respectively. An increase in the frictional forces with increasing applied axial loads was registered. The measurements showed an evidence of a decrease in the magnitude of the frictional coefficient with increasing sliding velocity. The results of this study provide a considerable assessment to clarify the suitable frictional coefficient to be used in the finite element contact analysis of antler specimens.
Y1  - 2012
SN  - 1862-278X
VL  - 57
IS  - 5
SP  - 359
EP  - 363
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
ED  - Eberhardsteiner, J.
T1  - A primal-dual shakedown analysis of 3D structures using the face-based smoothed finite element method
T2  - Proceedings European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)
Y1  - 2012
N1  - 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Weil, M. H.
A1  - Bäcker, Matthias
A1  - Mayer, D.
A1  - Schöning, Michael Josef
T1  - Field-effect Devices Functionalised with Gold-Nanoparticle/Macromolecule Hybrids: New Opportunities for a Label-Free Biosensing
JF  - Procedia Engineering
N2  - Field-effect capacitive electrolyte-insulator-semiconductor (EIS) sensors functionalised with citrate-capped gold nanoparticles (AuNP) have been used for the electrostatic detection of macromolecules by their intrinsic molecular charge. The EIS sensor detects the charge changes in the AuNP/macromolecule hybrids induced by the adsorption or binding events. A feasibility of the proposed detection scheme has been exemplary demonstrated by realising EIS sensors for the detection of poly-D-lysine molecules.
Y1  - 2012
U6  - https://doi.org/10.1016/j.proeng.2012.09.136
SN  - 1877-7058
N1  - Part of special issue "26th European Conference on Solid-State Transducers, EUROSENSOR 2012"
IS  - 47
SP  - 273
EP  - 276
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Raatschen, Hans-Jürgen
A1  - Staat, Manfred
ED  - Holzapfel, Gerhard A.
T1  - Effectiveness of the edge-based smoothed finite element method applied to soft biological tissues
T2  - ESMC-2012 - 8th European Solid Mechanics Conference, Graz, Austria, July 9-13, 2012
Y1  - 2012
SN  - 978-3-85125-223-1
PB  - Verlag d. Technischen Universität Graz
CY  - Graz
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Leinhos, Marcel
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Characterization of biodegradable polymers with capacitive field-effect sensors
JF  - Sensors and actuators B: Chemical
N2  - In vitro studies of the degradation kinetic of biopolymers are essential for the design and optimization of implantable biomedical devices. In the presented work, a field-effect capacitive sensor has been applied for the real-time and in situ monitoring of degradation processes of biopolymers for the first time. The polymer-covered field-effect sensor is, in principle, capable to detect any changes in bulk, surface and interface properties of the polymer induced by degradation processes. The feasibility of this approach has been experimentally proven by using the commercially available biomedical polymer poly(D,L-lactic acid) (PDLLA) as a model system. PDLLA films of different thicknesses were deposited on the Ta₂O₅-gate surface of the field-effect structure from a polymer solution by means of spin-coating method. The polymer-modified field-effect sensors have been characterized by means of capacitance–voltage and impedance-spectroscopy method. The degradation of the PDLLA was accelerated by changing the degradation medium from neutral (pH 7.2) to alkaline (pH 9) condition, resulting in drastic changes in the capacitance and impedance spectra of the polymer-modified field-effect sensor.
KW  - Impedance spectroscopy
KW  - C–V method
KW  - Real-time monitoring
KW  - Poly(d,l-lacticacid)
KW  - (Bio)degradation
KW  - Field-effect sensor
Y1  - 2012
U6  - https://doi.org/10.1016/j.snb.2012.07.099
SN  - 0925-4005
N1  - Part of special issue "Selected Papers from the 14th International Meeting on Chemical Sensors"
VL  - 187
SP  - 2
EP  - 7
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Bäcker, Matthias
A1  - Raue, Markus
A1  - Schusser, Sebastian
A1  - Jeitner, C.
A1  - Breuer, L.
A1  - Wagner, P.
A1  - Poghossian, Arshak
A1  - Förster, Arnold
A1  - Mang, Thomas
A1  - Schöning, Michael Josef
T1  - Microfluidic chip with integrated microvalves based on temperature- and pH-responsive hydrogel thin films
JF  - Physica Status Solidi  (a)
N2  - Two types of microvalves based on temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm) and pH-responsive poly(sodium acrylate) (PSA) hydrogel films have been developed and tested. The PNIPAAm and PSA hydrogel films were prepared by means of in situ photopolymerization directly inside the fluidic channel of a microfluidic chip fabricated by combining Si and SU-8 technologies. The swelling/shrinking properties and height changes of the PNIPAAm and PSA films inside the fluidic channel were studied at temperatures of deionized water from 14 to 36 °C and different pH values (pH 3–12) of Titrisol buffer, respectively. Additionally, in separate experiments, the lower critical solution temperature (LCST) of the PNIPAAm hydrogel was investigated by means of a differential scanning calorimetry (DSC) and a surface plasmon resonance (SPR) method. Mass-flow measurements have shown the feasibility of the prepared hydrogel films to work as an on-chip integrated temperature- or pH-responsive microvalve capable to switch the flow channel on/off.
Y1  - 2012
U6  - https://doi.org/10.1002/pssa.201100763
SN  - 1862-6319
VL  - 209
IS  - 5
SP  - 839
EP  - 845
PB  - Wiley-VCH
CY  - Weinheim
ER  -