TY  - JOUR
A1  - Breuer, Lars
A1  - Raue, Markus
A1  - Kirschbaum, M.
A1  - Mang, Thomas
A1  - Schöning, Michael Josef
A1  - Thoelen, R.
A1  - Wagner, Torsten
T1  - Light-controllable polymeric material based on temperature-sensitive hydrogels with incorporated graphene oxide
JF  - Physica status solidi (a)
N2  - Poly(N-isopropylacrylamide) (PNIPAAm) hydrogel films with incorporated graphene oxide (GO) were developed and tested as light-stimulated actuators. GO dispersions were synthesized via Hummers method and characterized toward their optical properties and photothermal energy conversion. The hydrogels were prepared by means of photopolymerization. In addition, the influence of GO within the hydrogel network on the lower critical solution temperature (LCST) was investigated by differential scanning calorimetry (DSC). The optical absorbance and the response to illumination were determined as a function of GO concentration for thin hydrogel films. A proof of principle for the stimulation with light was performed.
Y1  - 2015
U6  - https://doi.org/10.1002/pssa.201431944
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1368
EP  - 1374
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Breuer, Lars
A1  - Pilas, Johanna
A1  - Guthmann, Eric
A1  - Schöning, Michael Josef
A1  - Thoelen, Ronald
A1  - Wagner, Torsten
T1  - Towards light-addressable flow control: responsive hydrogels with incorporated graphene oxide as laser-driven actuator structures within microfluidic channels
JF  - Sensor and Actuators B: Chemical
Y1  - 2019
U6  - https://doi.org/10.1016/j.snb.2019.02.086
SN  - 0925-4005
VL  - 288
SP  - 579
EP  - 585
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Breuer, Lars
A1  - Mang, Thomas
A1  - Schöning, Michael Josef
A1  - Thoelen, Ronald
A1  - Wagner, Torsten
T1  - Investigation of the spatial resolution of a laser-based stimulation process for light-addressable hydrogels with incorporated graphene oxide by means of IR thermography
JF  - Sensors and Actuators A: Physical
Y1  - 2017
U6  - https://doi.org/10.1016/j.sna.2017.11.031
SN  - 0924-4247
VL  - 268
SP  - 126
EP  - 132
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Bressel, A.
A1  - Schultze, J.W.
A1  - Khan, W.
A1  - Wolfaardt, G. M.
A1  - Rohns, H.-P.
A1  - Irmscher, R.
A1  - Schöning, Michael Josef
T1  - High resolution gravimetric, optical and electrochemical investigations of microbial biofilm formation in aqueous systems
JF  - Electrochimica Acta. 48 (2003), H. 20-22
Y1  - 2003
SN  - 0013-4686
SP  - 3363
EP  - 3372
ER  - 
TY  - JOUR
A1  - Breitbach, Gerd
A1  - Wolf, U.
A1  - Deschka, S.
A1  - Nickel, H.
T1  - Thermomechanical analysis of an actively cooled divertor mock up
JF  - Tagungsbericht : Jahrestagung Kerntechnik : Stadthalle Karlsruhe, 5.-7. Mai 1992, Karlsruhe = Proceedings / Kerntechnische Gesellschaft ... [Red.: Karl G. Bauer]. - 1. Aufl., als Ms. gedr..
Y1  - 1992
N1  - Jahrestagung Kerntechnik <1992, Karlsruhe>
SP  - 457
EP  - 461
PB  - INFOFORUM
CY  - Bonn
ER  - 
TY  - JOUR
A1  - Breitbach, Gerd
A1  - Schubert, F.
T1  - A contribution to stress prediction in coatings for gas turbine blades
JF  - Archive of applied mechanics. 73 (2004), H. 9-10
Y1  - 2004
SN  - 0939-1533
N1  - 2. ISSN (Druck-Ausg.): 1432-0681
SP  - 682
EP  - 689
ER  - 
TY  - JOUR
A1  - Breitbach, Gerd
A1  - Schmidt-Plutka, A.
A1  - Schubert, F.
A1  - Nickel, H.
T1  - Deformation behaviour of structures exposed at very high temperatures to cyclic thermal and mechanical loadings
JF  - Structural mechanics in reactor technology : transactions of the 12th International Conference on Structural Mechanics in Reactor Technology, Stuttgart, Germany, 15-20 August 1993 / ed. Karl F. Kussmaul. - Bd. L : Inelastic behaviour of solids and structures
Y1  - 1993
SN  - 0-444-81515-5
N1  - SMiRT <12, 1993, Stuttgart>  ; L08/3
SP  - 203
EP  - 208
PB  - Elsevier
CY  - Amsterdam [u.a.]
ER  - 
TY  - JOUR
A1  - Breitbach, Gerd
A1  - Deschka, S.
A1  - Akiba, M.
T1  - High heat flux tests on brazed divertor components in electron and ion beam test facilities / S. Deschka ;  M. Akiba ; G. Breitbach ...
JF  - International journal of refractory metals and hard materials. 11 (1992), H. 6
Y1  - 1992
SN  - 0263-4368
N1  - 2. ISSN (Druck-Ausg.): 0263-4368
SP  - 367
EP  - 375
ER  - 
TY  - JOUR
A1  - Braun, Sebastian
A1  - Cheng, Chi-Tsun
A1  - Dowey, Steve
A1  - Wollert, Jörg
T1  - Performance evaluation of skill-based order-assignment in production environments with multi-agent systems
JF  - IEEE Journal of Emerging and Selected Topics in Industrial Electronics
N2  - The fourth industrial revolution introduces disruptive technologies to production environments. One of these technologies are multi-agent systems (MASs), where agents virtualize machines. However, the agent's actual performances in production environments can hardly be estimated as most research has been focusing on isolated projects and specific scenarios. We address this gap by implementing a highly connected and configurable reference model with quantifiable key performance indicators (KPIs) for production scheduling and routing in single-piece workflows. Furthermore, we propose an algorithm to optimize the search of extrema in highly connected distributed systems. The benefits, limits, and drawbacks of MASs and their performances are evaluated extensively by event-based simulations against the introduced model, which acts as a benchmark. Even though the performance of the proposed MAS is, on average, slightly lower than the reference system, the increased flexibility allows it to find new solutions and deliver improved factory-planning outcomes. Our MAS shows an emerging behavior by using flexible production techniques to correct errors and compensate for bottlenecks. This increased flexibility offers substantial improvement potential. The general model in this paper allows the transfer of the results to estimate real systems or other models.
KW  - cyber-physical production systems
KW  - event-based simulation
KW  - multi-agent systems
KW  - digital factory
KW  - industrial agents
Y1  - 2021
U6  - https://doi.org/10.1109/JESTIE.2021.3108524
SN  - 2687-9735
IS  - Early Access
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Bragard, Michael
A1  - van Hoek, H.
A1  - De Doncker, R. W.
T1  - A major design step in IETO concept realization that allows overcurrent protection and pushes limits of switching performance
JF  - IEEE transactions on power electronics
N2  - This paper presents the latest prototype of the integrated emitter turn-off thyristor concept, which potentially ranks among thyristor high-power devices like the gate turn-off thyristor and the integrated gate-commutated thyristor (IGCT). Due to modifications of the external driver stage and mechanical press-pack design optimization, this prototype allows for full device characterization. The turn-off capability was increased to 1600 A with an active silicon area of 823mm2 . This leads to a transient peak power of 672.1kW/cm² . Within this paper, measurements and concept assessment are presented and a comparison to state-of-the-art IGCT devices is provided.
Y1  - 2012
U6  - https://doi.org/10.1109/TPEL.2012.2189136
SN  - 0885-8993
VL  - 27
IS  - 9
SP  - 4163
EP  - 4171
PB  - IEEE
CY  - New York
ER  -