TY  - CHAP
A1  - Ritz, Thomas
A1  - Izquierdo Tello, César
A1  - Damm, Sebastian
T1  - Connecting a pedelec to the cloud as basis for gamification in multi modal mobility planning
T2  - MobileCloud 2014 : 2nd IEEE International Conference on Mobile Cloud Computing, Services, and Engineering Oxford, United Kingdom 7-10 April 2014
Y1  - 2014
SN  - 978-1-4799-2504-9
U6  - https://doi.org/10.1109/MobileCloud.2014.25
SP  - 101
EP  - 108
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Bäcker, Matthias
A1  - Krischer, M.
A1  - Wenzel, L.
A1  - Leinhos, Marcel
A1  - Poghossian, Arshak
A1  - Biselli, Manfred
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - Enzymatically catalyzed degradation of biodegradable polymers investigated by means of a semiconductor-based field-effect sensor
JF  - Procedia Engineering
N2  - A semiconductor field-effect device has been used for an enzymatically catalyzed degradation of biopolymers for the first time. This novel technique is capable to monitor the degradation process of multiple samples in situ and in real-time. As model system, the degradation of the biopolymer poly(D, L-lactic acid) has been monitored in the degradation medium containing the enzyme lipase from Rhizomucor miehei. The obtained results demonstrate the potential of capacitive field-effect sensors for degradation studies of biodegradable polymers.
KW  - Field-effect sensor
KW  - enzymatic (bio)degradation
KW  - poly(d, l-lactic acid)
KW  - in-situ monitoring
KW  - impedance spectroscopy
Y1  - 2014
U6  - https://doi.org/10.1016/j.proeng.2014.11.689
SN  - 1877-7058
N1  - EUROSENSORS 2014 ; European Conference on Solid-State Transducers <28, 2014>
VL  - 87
SP  - 1314
EP  - 1317
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Label-free sensing of biomolecules with field-effect devices for clinical applications
JF  - Electroanalysis
N2  - Among the variety of transducer concepts proposed for label-free detection of biomolecules, the semiconductor field-effect device (FED) is one of the most attractive platforms. As medical techniques continue to progress towards diagnostic and therapies based on biomarkers, the ability of FEDs for a label-free, fast and real-time detection of multiple pathogenic and physiologically relevant molecules with high specificity and sensitivity offers very promising prospects for their application in point-of-care and personalized medicine for an early diagnosis and treatment of diseases. The presented paper reviews recent advances and current trends in research and development of different FEDs for label-free, direct electrical detection of charged biomolecules by their intrinsic molecular charge. The authors are mainly focusing on the detection of the DNA hybridization event, antibody-antigen affinity reaction as well as clinically relevant biomolecules such as cardiac and cancer biomarkers.
Y1  - 2014
U6  - https://doi.org/10.1002/elan.201400073
SN  - 1521-4109 (E-Journal); 1040-0397 (Print)
VL  - 26
IS  - 6
SP  - 1197
EP  - 1213
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Leinhos, Marcel
A1  - Schusser, Sebastian
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Micromachined multi-parameter sensor chip for the control of polymer-degradation medium
JF  - Physica Status Solidi (A) : special issue on engineering and functional interfaces
N2  - It is well known that the degradation environment can strongly influence the biodegradability and kinetics of biodegradation processes of polymers. Therefore, besides the monitoring of the degradation process, it is also necessary to control the medium in which the degradation takes place. In this work, a micromachined multi-parameter sensor chip for the control of the polymer-degradation medium has been developed. The chip combines a capacitive field-effect pH sensor, a four-electrode electrolyte-conductivity sensor and a thin-film Pt-temperature sensor. The results of characterization of individual sensors are presented. In addition, the multi-parameter sensor chip together with an impedimetric polymer-degradation sensor was simultaneously characterized in degradation solutions with different pH and electrolyte conductivity. The obtained results demonstrate the feasibility of the multi-parameter sensor chip for the control of the polymer-degradation medium.
Y1  - 2014
U6  - https://doi.org/10.1002/pssa.201330364
SN  - 1521-396X (E-Journal); 1862-6319 (E-Journal); 0031-8965 (Print); 1862-6300 (Print)
VL  - 211
IS  - 6
SP  - 1346
EP  - 1351
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Chaudhuri, S.
A1  - Zander, W.
A1  - Schubert, J.
A1  - Begoyan, V. K.
A1  - Buniatyan, V. V.
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - Capacitively coupled electrolyte-conductivity sensor based on high-k material of barium strontium titanate
JF  - Sensors and actuators. B: Chemical
Y1  - 2014
U6  - https://doi.org/10.1016/j.snb.2014.02.103
SN  - 1873-3077 (E-Journal); 0925-4005 (Print)
IS  - 198
SP  - 102
EP  - 109
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Bäcker, Matthias
A1  - Kramer, F.
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Bratov, A.
A1  - Abramova, N.
A1  - Schöning, Michael Josef
T1  - Planar and 3D interdigitated electrodes for biosensing applications: The impact of a dielectric barrier on the sensor properties
JF  - Physica Status Solidi (A) - Applications and Materials Science
N2  - Planar and three-dimensional (3D) interdigitated electrodes (IDE) with electrode digits separated by an insulating barrier of different heights were electrochemically characterized and compared in terms of their sensing properties. Due to the impact of the surface resistance, both types of IDE structures display a non-linear behavior in low-ionic strength solutions. The experimental data were fitted to an electrical equivalent circuit and interpreted taking into account the surface-charge-governed properties. The effect of a charged polyelectrolyte layer electrostatically assembled onto the sensor surface on the surface resistance in solutions with different KCl concentration is studied. In case of the same electrode footprint, 3D-IDEs show a larger cell constant and a higher sensitivity to molecular adsorption than that of planar IDEs. The obtained results demonstrate the potential of 3D-IDEs as a new transducer structure for a direct label-free sensing of charged molecules.
Y1  - 2014
U6  - https://doi.org/10.1002/pssa.201330416
SN  - 1521-396X (E-Journal); 1862-6319 (E-Journal); 0031-8965 (Print); 1862-6300 (Print)
VL  - 211
IS  - 6
SP  - 1357
EP  - 1363
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Moseley, Fiona
A1  - Halamek, Jan
A1  - Kramer, Friederike
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Katz, Evgeny
T1  - An enzyme-based reversible CNOT logic gate realized in a flow system
JF  - Analyst
N2  - An enzyme system organized in a flow device was used to mimic a reversible Controlled NOT (CNOT) gate with two input and two output signals. Reversible conversion of NAD⁺ and NADH cofactors was used to perform a XOR logic operation, while biocatalytic hydrolysis of p-nitrophenyl phosphate resulted in an Identity operation working in parallel. The first biomolecular realization of a CNOT gate is promising for integration into complex biomolecular networks and future biosensor/biomedical applications.
Y1  - 2014
U6  - https://doi.org/10.1039/C4AN00133H
SN  - 1364-5528 (E-Journal) ; 0003-2654 (Print)
VL  - 139
IS  - 8
SP  - 1839
EP  - 1842
PB  - Royal Society of Chemistry
CY  - Cambridge
ER  - 
TY  - CHAP
A1  - McInnes, Colin R.
A1  - Bothmer, Volker
A1  - Dachwald, Bernd
A1  - Geppert, Ulrich R. M. E.
A1  - Heiligers, Jeannette
A1  - Hilgers, Alan
A1  - Johnson, Les
A1  - Macdonald, Malcolm
A1  - Reinhard, Ruedeger
A1  - Seboldt, Wolfgang
A1  - Spietz, Peter
T1  - Gossamer roadmap technology reference study for a Sub-L1 Space Weather Mission
T2  - Advances in solar sailing
N2  - A technology reference study for a displaced Lagrange point space weather mission is presented. The mission builds on previous concepts, but adopts a strong micro-spacecraft philosophy to deliver a low mass platform and payload which can be accommodated on the DLR/ESA Gossamer-3 technology demonstration mission. A direct escape from Geostationary Transfer Orbit is assumed with the sail deployed after the escape burn. The use of a miniaturized, low mass platform and payload then allows the Gossamer-3 solar sail to potentially double the warning time of space weather events. The mission profile and mass budgets will be presented to achieve these ambitious goals.
Y1  - 2014
SN  - 978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)
SP  - 227
EP  - 242
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - GEN
A1  - Duwe, A.
A1  - Schlegel, C.
A1  - Tippkötter, Nils
A1  - Ulber, Roland
T1  - Sequentielle Extraktion von Cellulose zur effizienten Nutzung der Stoffströme in der Holzbioraffinerie
T2  - Chemie Ingenieur Technik
N2  - In der Reihe der nachwachsenden Rohstoffe besitzt Holz als erneuerbare und umweltfreundliche Ressource ein großes Potenzial. Über 11 Mio. ha Holz, das laut der Fachagentur für nachwachsende Rohstoffe (FNR) auch für industrielle Zwecke genutzt werden kann, wuchsen im Jahr 2013 allein auf bundesdeutscher Fläche. 56,8 Mio. m³ jährlicher Holzeinschlag in den letzten zehn Jahren wurde zu knapp der Hälfte stofflich und der Rest energetisch verwertet. Im Rahmen dieser Arbeit konnte auf der Basis vom Holz der Buche, die nach Fichte und Kiefer die dritthäufigste Baumart in Deutschland ist und 15% der deutschen Waldfläche ausmacht, die Fraktionierung der polymeren Hauptbestandteile mit niedrigem energetischen Einsatz erreicht werden. Hierbei werden in einem nachgeschalteten Extraktionsprozess die beiden Komponenten Hemicellulose und Lignin in flüssiger Form von der finalen festen Cellulosefraktion abgetrennt. Die Extraktion der Hemicellulose erfolgt durch eine Liquid Hot Water (LHW)-Behandlung. Untersucht wird der katalytische Zusatz anorganischer Säuren wie H₃PO₄ und H₂SO₄. Im Hinblick auf die weitere Verwertung von Lignin zu aromatischen Synthesebausteinen kommt die Organosolv-Extraktion mit einem Ethanol/Wasser-Gemisch zum Einsatz. Von Vorteil ist die weitere Verwendung beider Stoffströme ohne Fällungsschritt und nachteiliger Verdünnung der Hemicellulose.
Y1  - 2014
U6  - https://doi.org/10.1002/cite.201450308
SN  - 0009-286X
SN  - 1522-2640 (eISSN)
N1  - ProcessNet-Jahrestagung 2014 und 31. DECHEMA-Jahrestagung der Biotechnologen, 30. September - 2. Oktober 2014, Eurogress Aachen
VL  - 86
IS  - 9
SP  - 1400
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Reisert, Steffen
A1  - Schubert, J.
A1  - Zander, W.
A1  - Begoyan, V. K.
A1  - Buniatyan, V. V.
A1  - Schöning, Michael Josef
T1  - Chemical sensors based on a high-k perovskite oxide of barium strontium titanate
JF  - Procedia Engineering
N2  - High-k perovskite oxide of barium strontium titanate (BST) represents a very attractive multi-functional transducer material for the development of (bio-)chemical sensors for liquids. In this work, BST films have been applied as a sensitive transducer material for a label-free detection of adsorbed charged macromolecules (positively charged polyelectrolytes) and concentration of hydrogen peroxide vapor as well as protection insulator layer for a contactless electrolyte-conductivity sensor. The experimental results of characterization of individual sensors are presented. Special emphasis is devoted towards the development of a capacitively-coupled contactless electrolyte-conductivity sensor.
KW  - barium strontium titanate
KW  - high-k material
KW  - contactless conductivity sensor
KW  - multi-functional material
KW  - hydrogen peroxide
Y1  - 2014
U6  - https://doi.org/10.1016/j.proeng.2014.11.258
SN  - 1877-7058
N1  - EUROSENSORS 2014 ; European Conference on Solid-State Transducers <28, 2014>
VL  - 87
SP  - 28
EP  - 31
PB  - Elsevier
CY  - Amsterdam
ER  -