TY  - JOUR
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Keinz, Jan
A1  - Abanteriba, Sylvester
T1  - Comparison of Numerical Combustion Models for Hydrogen and Hydrogen-Rich Syngas Applied for Dry-Low-Nox-Micromix-Combustion
JF  - Journal of Engineering for Gas Turbines and Power
N2  - The Dry-Low-NOx (DLN) Micromix combustion technology has been developed as low emission combustion principle for industrial gas turbines fueled with hydrogen or syngas. The combustion process is based on the phenomenon of jet-in-crossflow-mixing (JICF). Fuel is injected perpendicular into the air-cross-flow and burned in a multitude of miniaturized, diffusion-like flames. The miniaturization of the flames leads to a significant reduction of NOx emissions due to the very short residence time of reactants in the flame. In the Micromix research approach, computational fluid dynamics (CFD) analyses are validated toward experimental results. The combination of numerical and experimental methods allows an efficient design and optimization of DLN Micromix combustors concerning combustion stability and low NOx emissions. The paper presents a comparison of several numerical combustion models for hydrogen and hydrogen-rich syngas. They differ in the complexity of the underlying reaction mechanism and the associated computational effort. The performance of a hybrid eddy-break-up (EBU) model with a one-step global reaction is compared to a complex chemistry model and a flamelet generated manifolds (FGM) model, both using detailed reaction schemes for hydrogen or syngas combustion. Validation of numerical results is based on exhaust gas compositions available from experimental investigation on DLN Micromix combustors. The conducted evaluation confirms that the applied detailed combustion mechanisms are able to predict the general physics of the DLN-Micromix combustion process accurately. The FGM method proved to be generally suitable to reduce the computational effort while maintaining the accuracy of detailed chemistry.
Y1  - 2018
U6  - https://doi.org/10.1115/1.4038882
SN  - 0742-4795
N1  - Article number 081504;
Paper No: GTP-17-1567
VL  - 140
IS  - 8
PB  - ASME
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Schulze, Sven
A1  - Mühleisen, M.
A1  - Feyerl, Günter
T1  - Adaptive energy management strategy for a heavy-duty truck with a P2-hybrid topology
T2  - 18. Internationales Stuttgarter Symposium. Proceedings
Y1  - 2018
U6  - https://doi.org/10.1007/978-3-658-21194-3
SP  - 75
EP  - 89
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Blome, Hans-Joachim
T1  - Über die kulturelle Bedeutung der Raumfahrt
T2  - Überleben im Weltraum. Auf dem Weg zu neuen Grenzen. 21. Berliner Kolloquium der Daimler und Benz Stiftung 24. Mai 2017
Y1  - 2018
SP  - 5
EP  - 5
ER  - 
TY  - JOUR
A1  - Röth, Thilo
A1  - Pielen, Michael
A1  - Wolff, Klaus
A1  - Lüdiger, Thomas
T1  - Urbane Fahrzeugkonzepte für die Shared Mobility
JF  - Automobiltechnische Zeitschrift - ATZ
N2  - Urbane Mobilitätskonzepte der Zukunft erfordern neue Unternehmensformen, idealerweise aus Old Economy und New Economy, sowie eine enge Anbindung an die gesellschaftsrelevante Zukunftsforschung. Für neue Fahrzeugkonzepte des Carsharing bedeutet dies, dass alle kostenverursachenden Faktoren erfasst und analysiert werden müssen. Die FH Aachen, share2drive und FEV geben einen Ausblick auf die zukünftige Fahrzeugklasse der Personal Public Vehicles als „Rolling Device“.
Y1  - 2018
U6  - https://doi.org/10.1007/s35148-017-0176-8
SN  - 0001-2785
VL  - 120
IS  - 1
SP  - 18
EP  - 23
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Schirra, Julian
A1  - Bissonnette, William
A1  - Bramesfeld, Götz
T1  - Wake-model effects on induced drag prediction of staggered boxwings
JF  - Aerospace
Y1  - 2018
U6  - https://doi.org/10.3390/aerospace5010014
SN  - 2226-4310
VL  - 5
IS  - 1
ER  - 
TY  - CHAP
A1  - Baader, Fabian
A1  - Reiswich, M.
A1  - Bartsch, M.
A1  - Keller, D.
A1  - Tiede, E.
A1  - Keck, G.
A1  - Demircian, A.
A1  - Friedrich, M.
A1  - Dachwald, Bernd
A1  - Schüller, K.
A1  - Lehmann, R.
A1  - Chojetzki, R.
A1  - Durand, C.
A1  - Rapp, L.
A1  - Kowalski, Julia
A1  - Förstner, R.
T1  - VIPER - Student research on extraterrestrical ice penetration technology
T2  - Proceedings of the 2nd Symposium on Space Educational Activities
N2  - Recent analysis of scientific data from Cassini and earth-based observations gave evidence for a global ocean under a surrounding solid ice shell on Saturn's moon Enceladus. Images of Enceladus' South Pole showed several fissures in the ice shell with plumes constantly exhausting frozen water particles, building up the E-Ring, one of the outer rings of Saturn. In this southern region of Enceladus, the ice shell is considered to be as thin as 2 km, about an order of magnitude thinner than on the rest of the moon. Under the ice shell, there is a global ocean consisting of liquid water. Scientists are discussing different approaches the possibilities of taking samples of water, i.e. by melting through the ice using a melting probe. FH Aachen UAS developed a prototype of maneuverable melting probe which can navigate through the ice that has already been tested successfully in a terrestrial environment. This means no atmosphere and or ambient pressure, low ice temperatures of around 100 to 150K (near the South Pole) and a very low gravity of 0,114 m/s^2 or 1100 μg. Two of these influencing measures are about to be investigated at FH Aachen UAS in 2017, low ice temperature and low ambient pressure below the triple point of water. Low gravity cannot be easily simulated inside a large experiment chamber, though. Numerical simulations of the melting process at RWTH Aachen however are showing a gravity dependence of melting behavior. Considering this aspect, VIPER provides a link between large-scale experimental simulations at FH Aachen UAS and numerical simulations at RWTH Aachen. To analyze the melting process, about 90 seconds of experiment time in reduced gravity and low ambient pressure is provided by the REXUS rocket. In this time frame, the melting speed and contact force between ice and probes are measured, as well as heating power and a two-dimensional array of ice temperatures. Additionally, visual and infrared cameras are used to observe the melting process.
Y1  - 2018
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Röth, Thilo
A1  - Pielen, Michael
T1  - Personal Public Vehicle – ein urbanes Fahrzeugkonzept für die „Shared Mobility“ der Zukunft
T2  - Karosseriebautage Hamburg 2018, 16. ATZ-Fachtagung
N2  - Die urbane Mobilität ist im Wandel und insbesondere neue innovative Geschäftsmodelle werden einen wesentlichen Teil zur Lösung von künftigen Mobilitätsbedürfnissen beitragen. Die sogenannte „Shared Mobility“ gilt aktuell neben der Elektrifizierung des Antriebes und autonomem Fahrzeugtechnologien als einer der wichtigsten Trendthemen in der Automobilindustrie. Neue Mobilitätsdienstleistungen verlangen dabei verstärkt auch neue Fahrzeugkonzepte.
Y1  - 2018
U6  - https://doi.org/10.1007/978-3-658-22038-9_13
SP  - 189
EP  - 199
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Götten, Falk
A1  - Havermann, Marc
A1  - Braun, Carsten
A1  - Gomez, Francisco
A1  - Bil, Cees
T1  - On the Applicability of Empirical Drag Estimation Methods for Unmanned Air Vehicle Design   Read More: https://arc.aiaa.org/doi/10.2514/6.2018-3192
T2  - 2018 Aviation Technology, Integration, and Operations Conference, AIAA AVIATION Forum
Y1  - 2018
U6  - https://doi.org/10.2514/6.2018-3192
SN  - 1533-385X
N1  - AIAA 2018-3192
SP  - Article 3192
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Bauer, Waldemar
A1  - Borchers, Kai
A1  - Dumont, Etienne
A1  - Grimm, Christian D.
A1  - Ho, Tra-Mi
A1  - Jahnke, Rico
A1  - Lange, Caroline
A1  - Maiwald, Volker
A1  - Mikulz, Eugen
A1  - Quantius, Dominik
A1  - Reershemius, Siebo
A1  - Renger, Thomas
A1  - Riemann, Johannes
A1  - Sasaki, Kaname
A1  - Seefeldt, Patric
A1  - Spietz, Peter
A1  - Spröwitz, Tom
A1  - Toth, Norbert
A1  - Wejmo, Elisabet
A1  - Biele, Jens
A1  - Krause, Christian
A1  - Cerotti, Matteo
A1  - Peloni, Alessandro
A1  - Dachwald, Bernd
T1  - Small Spacecraft Solar Sailing for Small Solar System Body Multiple Rendezvous and Landing
T2  - 2018 IEEE Aerospace Conference : 3-10 March 2018
Y1  - 2018
SN  - 978-1-5386-2014-4
ER  - 
TY  - CHAP
A1  - Pielen, Michael
A1  - Röth, Thilo
A1  - Flatten, T.
ED  - Proff, H.
T1  - Erfolgsfaktoren künftiger Geschäftsmodelle von urbanen, geteilten Mobilitätsdienstleistungen
T2  - Mobilität und digitale Transformation.  (9. Wissenschaftsforum Mobilität. Tagungsband)
N2  - Digitalisierung bezeichnet die Nutzung großer Datenmengen, die zu einer umfassenden Vernetzung aller Bereiche der Wirtschaft und Gesellschaft führen wird (BMWi, 2015 und ähnlich Köhler/Wollschläger, 2014: 79). Sie umfasst die Erhebung von analogen Informationen („Big Data“ in einem engen Sinne; z.B. O´Leary, 2013), ihre Speicherung in einem digitaltechnischen System (lokale Speicherung oder „Cloud Computing“ durch die Weiterentwickelung des Internets; z.B. Hashem et al., 2015: 101), die Analyse und Interpretation sowie den Transfer in andere Systeme („Internet der Dinge“ bzw. „Internet of Things“; z.B. Ashton, 2009).
Y1  - 2018
SN  - 978-3-658-20779-3
U6  - https://doi.org/10.1007/978-3-658-20779-3_2
SP  - 435
EP  - 448
PB  - Springer Gabler
CY  - Wiesbaden
ER  -