TY  - JOUR
A1  - Kotliar, Konstantin
A1  - Svetlova, O. V.
A1  - Makarov, F. N.
A1  - Zaseeva, M. V.
T1  - Morfologicheskie i funktsional'nye osobennosti resnichnogo poiaska khrustalika kak kliuchevogo ispolnitel'nogo zvena v mekhanizme akkommodatsii glaza cheloveka = Morpho-functional characteristics of lens ciliary body as a key mechanism of accommodation in
JF  - Morfologiia (Saint Petersburg, Russia). 123 (2003), H. 3
Y1  - 2003
SN  - 1026-3543
N1  - Original in Russisch, English abstract
SP  - 7
EP  - 16
PB  - -
ER  - 
TY  - JOUR
A1  - Hekmat, Khosro
A1  - Kanani, Reza
A1  - Lauterbach, Gerhard
A1  - Südkamp, Michael
A1  - Ahmadpoor, Tooraj
A1  - Weber, Hans-Joachim
A1  - Mehlhorn, Uwe
T1  - Moderne Herzschrittmachersysteme wenig störanfällig durch Mobilfunktelefone
JF  - Deutsches Ärzteblatt. 100 (2003), H. 38
Y1  - 2003
SP  - A2438
EP  - A2445
ER  - 
TY  - CHAP
A1  - Moritz, Werner
A1  - Yoshinobu, Tatsuo
A1  - Finger, Friedhelm
A1  - Krause, Steffi
A1  - Schöning, Michael Josef
T1  - Amorphous silicon as semiconductor material for high resolution LAPS
T2  - Eurosensors XVII : the 17th European Conference on Solid-State Transducers ; University of Minho, Guimarães, Portugal, September 21 - 24, 2003
Y1  - 2003
SP  - 48
EP  - 49
ER  - 
TY  - CHAP
A1  - Ermelenko, Y.
A1  - Yoshinobu, T.
A1  - Mourzina, Y.
A1  - Schöning, Michael Josef
A1  - Vlasov, Y.
A1  - Iwasaki, H.
T1  - A multisensor based on laser scanned silicon transducer (LSST): development and properties
T2  - Eurosensors XVII : the 17th European Conference on Solid-State Transducers ; University of Minho, Guimarães, Portugal, September 21 - 24, 2003
Y1  - 2003
SP  - 72
EP  - 73
ER  - 
TY  - CHAP
A1  - Yoshinobu, T.
A1  - Schöning, Michael Josef
A1  - Finger, F.
A1  - Moritz, W.
A1  - Iwasaki, H.
T1  - Thin-film a-Si LAPS : Preparation and pH sensitivity
T2  - Eurosensors XVII : the 17th European Conference on Solid-State Transducers ; University of Minho, Guimarães, Portugal, September 21 - 24, 2003
Y1  - 2003
SP  - 88
EP  - 89
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Heitzer, Michael
ED  - Staat, Manfred
ED  - Heitzer, Michael
T1  - Probabilistic limit and shakedown problems
T2  - Numerical methods for limit and shakedown analysis. Deterministic and probabilistic problems
Y1  - 2003
SN  - 3-00-010001-6
N1  - NIC Series
VL  - 15
SP  - 217
EP  - 268
PB  - John von Neumann Institute for Computing (NIC)
CY  - Jülich
ER  - 
TY  - CHAP
A1  - Staat, Manfred
T1  - Design by Analysis of Pressure Components by non-linear Optimization
N2  - This paper presents the direct route to Design by Analysis (DBA) of the new European pressure vessel standard in the language of limit and shakedown analysis (LISA). This approach leads to an optimization problem. Its solution with Finite Element Analysis is demonstrated for some examples from the DBA-Manual. One observation from the examples is, that the optimisation approach gives reliable and close lower bound solutions leading to simple and optimised design decision.
KW  - Analytischer Zulaessigkeitsnachweis
KW  - FEM
KW  - Einspiel-Analyse
KW  - design-by-analysis
KW  - finite element analysis
KW  - limit and shakedown analysis
Y1  - 2003
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Schwartz, M.
A1  - Lang, H.
A1  - Wirtz, K.
A1  - Heitzer, M.
T1  - Design by Analysis of Pressure Components by non-linear Optimization
JF  - The 10th International Conference on Pressure Vessel Technology, July 7-10, 2003, Vienna, Austria, Proceedings ICPVT-10 / Zeman, J. L. [ed]
Y1  - 2003
SN  - 3950152814
SP  - 59
EP  - 65
PB  - ÖGS, Österreichische Gesellschaft für Schweißtechnik
CY  - Wien
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Shakedown and ratchetting under tension-torsion loadings: analysis and experiments
N2  - Structural design analyses are conducted with the aim of verifying the exclusion of ratchetting. To this end it is important to make a clear distinction between the shakedown range and the ratchetting range. The performed experiment comprised a hollow tension specimen which was subjected to alternating axial forces, superimposed with constant moments. First, a series of uniaxial tests has been carried out in order to calibrate a bounded kinematic hardening rule. The load parameters have been selected on the basis of previous shakedown analyses with the PERMAS code using a kinematic hardening material model. It is shown that this shakedown analysis gives reasonable agreement between the experimental and the numerical results. A linear and a nonlinear kinematic hardening model of two-surface plasticity are compared in material shakedown analysis.
KW  - Einspielen <Werkstoff>
KW  - Einspielen
KW  - Ratchetting
KW  - Zug-Druck Belastung
KW  - shakedown
KW  - ratchetting
KW  - tension–torsion loading
Y1  - 2003
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Heitzer, M.
T1  - Probabilistic limit and shakedown problems
JF  - Numerical Methods for Limit and Shakedown Analysis. Deterministic and Probabilistic Approach. NIC Series Vol. 15 / Ed. by Staat, M; Heitzer, M.
Y1  - 2003
SN  - 3-00-010001-6
SP  - 217
EP  - 268
PB  - John von Neumann Institute for Computing (NIC)
CY  - Jülich
ER  -