TY  - CHAP
A1  - Reimer, Lars
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - Computational study of the aeroelastic equilibrium configuration of a swept wind tunnel wing model in subsonic flow
T2  - High performance computing in science and engineering '06. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2006 /  Wolfgang E. Nagel ... Eds.
N2  - In the Collaborative Research Center SFB 401 at RWTH Aachen University, the numerical aeroelastic method SOFIA for direct numerical aeroelastic simulation is being progressively developed. Numerical results obtained by applying SOFIA were compared with measured data of static and dynamic aeroelastic wind tunnel tests for an elastic swept wing in subsonic flow.
Y1  - 2007
SN  - 978-3-540-36165-7
SP  - 421
EP  - 434
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - CHAP
A1  - Braun, Carsten
A1  - Boucke, Alexander
A1  - Ballmann, Josef
T1  - Numerical study of the influence of dynamic pressure and deflected ailerons on the deformation of a high speed wing model
T2  - High performance computing in science and engineering '04. Transactions of the High Performance Computing Center Stuttgart (HLRS) 2004 /  Eds.: Egon Krause ...
Y1  - 2005
SN  - 3-540-22943-4
SP  - 225
EP  - 236
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Ballmann, Josef
A1  - Boucke, Alexander
A1  - Braun, Carsten
T1  - Aeroelastic sensitivity in the transonic regime
T2  - Symposium Transsonicum IV : proceedings of the IUTAM symposium held in Göttingen, Germany, 2 - 6 September 2002 / ed. by Helmut Sobieczky. Fluid mechanics and its applications.  Vol. 73
Y1  - 2003
SN  - 978-94-010-3998-7
SP  - 225
EP  - 236
PB  - Kluwer Academic
CY  - Dordrecht
ER  - 
TY  - CHAP
A1  - Britten, G.
A1  - Braun, Carsten
A1  - Hesse, M.
A1  - Ballmann, Josef
T1  - Computational aeroelasticity with reduced structural models
T2  - Flow modulation and fluid-structure interaction at airplane wings : research results of the Collaborative Research Center SFB 401 at RWTH Aachen, University of Technology, Aachen, Germany / Josef Ballmann (Ed.) Notes on numerical fluid mechanics and multidisciplinary design. Vol. 84
Y1  - 2003
SN  - 3-540-40209-8
SP  - 275
EP  - 299
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Ulamec, Stephan
A1  - Biele, Jens
T1  - Clean in situ subsurface exploration of icy environments in the solar system
T2  - Habitability of other planets and satellites. - (Cellular origin, life in extreme habitats and astrobiology ; 28)
N2  - "To assess the habitability of the icy environments in the solar system, for example, on Mars, Europa, and Enceladus, the scientific analysis of material embedded in or underneath their ice layers is very important. We consider self-steering robotic ice melting probes to be the best method to cleanly access these environments, that is, in compliance with planetary protection standards. The required technologies are currently developed and tested."
Y1  - 2013
SN  - 978-94-007-6545-0 (Druckausgabe)
SN  - 978-94-007-6546-7 (E-Book)
SP  - 367
EP  - 397
PB  - Springer
CY  - Dordrecht
ER  - 
TY  - CHAP
A1  - Wolff, Nino
A1  - Seefeldt, Patric
A1  - Bauer, Wolfgang
A1  - Fiebig, Christopher
A1  - Gerding, Patrick
A1  - Parow-Souchon, Kai
A1  - Pongs, Anna
A1  - Reiffenrath, Matti
A1  - Ziemann, Thomas
T1  - Alternative application of solar sail technology
T2  - Advances in solar sailing
N2  - The development of Gossamer sail structures for solar sails contributes to a large field of future space applications like thin film solar generators, membrane antennas and drag sails. The focus of this paper is the development of a drag sail based on solar sail technology that could contribute to a reduction of space debris in low Earth orbits. The drag sail design and its connections to solar sail development, a first test on a sounding rocket, as well as the ongoing integration of the drag sail into a triple CubeSat is presented.
Y1  - 2014
SN  - 978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)
U6  - http://dx.doi.org/10.1007/978-3-642-34907-2_23
SP  - 351
EP  - 365
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Boehnhardt, Herrmann
A1  - Broj, Ulrich
A1  - Geppert, Ulrich R. M. E.
A1  - Grundmann, Jan-Thimo
A1  - Seboldt, Wolfgang
A1  - Seefeldt, Patric
A1  - Spietz, Peter
A1  - Johnson, Les
A1  - Kührt, Ekkehard
A1  - Mottola, Stefano
A1  - Macdonald, Malcolm
A1  - McInnes, Colin R.
A1  - Vasile, Massimiliano
A1  - Reinhard, Ruedeger
T1  - Gossamer roadmap technology reference study for a multiple NEO Rendezvous Mission
T2  - Advances in solar sailing
N2  - A technology reference study for a multiple near-Earth object (NEO) rendezvous mission with solar sailcraft is currently carried out by the authors of this paper. The investigated mission builds on previous concepts, but adopts a strong micro-spacecraft philosophy based on the DLR/ESA Gossamer technology. The main scientific objective of the mission is to explore the diversity of NEOs. After direct interplanetary insertion, the solar sailcraft should—within less than 10 years—rendezvous three NEOs that are not only scientifically interesting, but also from the point of human spaceight and planetary defense. In this paper, the objectives of the study are outlined and a preliminary potential mission profile is presented.
Y1  - 2014
SN  - 978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)
SP  - 211
EP  - 226
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - CHAP
A1  - McInnes, Colin R.
A1  - Bothmer, Volker
A1  - Dachwald, Bernd
A1  - Geppert, Ulrich R. M. E.
A1  - Heiligers, Jeannette
A1  - Hilgers, Alan
A1  - Johnson, Les
A1  - Macdonald, Malcolm
A1  - Reinhard, Ruedeger
A1  - Seboldt, Wolfgang
A1  - Spietz, Peter
T1  - Gossamer roadmap technology reference study for a Sub-L1 Space Weather Mission
T2  - Advances in solar sailing
N2  - A technology reference study for a displaced Lagrange point space weather mission is presented. The mission builds on previous concepts, but adopts a strong micro-spacecraft philosophy to deliver a low mass platform and payload which can be accommodated on the DLR/ESA Gossamer-3 technology demonstration mission. A direct escape from Geostationary Transfer Orbit is assumed with the sail deployed after the escape burn. The use of a miniaturized, low mass platform and payload then allows the Gossamer-3 solar sail to potentially double the warning time of space weather events. The mission profile and mass budgets will be presented to achieve these ambitious goals.
Y1  - 2014
SN  - 978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)
SP  - 227
EP  - 242
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - CHAP
A1  - Macdonald, Malcolm
A1  - McGrath, C.
A1  - Appourchaux, T.
A1  - Dachwald, Bernd
A1  - Finsterle, W.
A1  - Gizon, L.
A1  - Liewer, P. C.
A1  - McInnes, Colin R.
A1  - Mengali, G.
A1  - Seboldt, W.
A1  - Sekii, T.
A1  - Solanki, S. K.
A1  - Velli, M.
A1  - Wimmer-Schweingruber, R. F.
A1  - Spietz, Peter
A1  - Reinhard, Ruedeger
ED  - Macdonald, Malcolm
T1  - Gossamer roadmap technology reference study for a solar polar mission
T2  - Advances in solar sailing
N2  - A technology reference study for a solar polar mission is presented. The study uses novel analytical methods to quantify the mission design space including the required sail performance to achieve a given solar polar observation angle within a given timeframe and thus to derive mass allocations for the remaining spacecraft sub-systems, that is excluding the solar sail sub-system. A parametric, bottom-up, system mass budget analysis is then used to establish the required sail technology to deliver a range of science payloads, and to establish where such payloads can be delivered to within a given timeframe. It is found that a solar polar mission requires a solar sail of side-length 100–125 m to deliver a ‘sufficient value’ minimum science payload, and that a 2.5 μm sail film substrate is typically required, however the design is much less sensitive to the boom specific mass.
Y1  - 2014
SN  - 978-3-642-34906-5
U6  - http://dx.doi.org/10.1007/978-3-642-34907-2_17
SP  - 243
EP  - 257
PB  - Springer
CY  - Berlin, Heidelberg
ER  - 
TY  - CHAP
A1  - Busse, Daniel
A1  - Esch, Thomas
A1  - Muntaniol, Roman
T1  - Thermal management in E-carsharing vehicles - preconditioning concepts of passenger compartments
T2  - E-Mobility in Europe : trends and good practice
N2  - The issue of thermal management in electric vehicles includes the topics of drivetrain cooling and heating, interior temperature, vehicle body conditioning and safety. In addition to the need to ensure optimal thermal operating conditions of the drivetrain components (drive motor, battery and electrical components), thermal comfort must be provided for the passengers. Thermal comfort is defined as the feeling which expresses the satisfaction of the passengers with the ambient conditions in the compartment. The influencing factors on thermal comfort are the temperature and humidity as well as the speed of the indoor air and the clothing and the activity of the passengers, in addition to the thermal radiation and the temperatures of the interior surfaces. The generation and the maintenance of free visibility (ice- and moisture-free windows) count just as important as on-demand heating and cooling of the entire vehicle. A Carsharing climate concept of the innovative ec2go vehicle stipulates and allows for only seating areas used by passengers to be thermally conditioned in a close-to-body manner. To enable this, a particular feature has been added to the preconditioning of the Carsharing electric vehicle during the electric charging phase at the parking station.
KW  - Carsharing
KW  - Thermal management
KW  - Thermal comfort
KW  - Electrical vehicle
KW  - Passenger compartment
Y1  - 2015
SN  - 978-3-319-13193-1
U6  - http://dx.doi.org/10.1007/978-3-319-13194-8_18
SP  - 327
EP  - 343
PB  - Springer
CY  - Cham [u.a.]
ER  -