TY  - JOUR
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Light-addressable potentiometric sensors (LAPS): recent trends and applications
JF  - Electrochemical sensor analysis / edited by S. Alegret ...
Y1  - 2007
SN  - 978-0-444-53053-0
N1  - Wilson & Wilson's comprehensive analytical chemistry ; 49
SP  - 87
EP  - 128
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Preface of the Special Issue of I3S 2005 in Jülich (Germany)
N2  - International Symposium on Sensor Science, I3S 2005 <3; 2005; Juelich, Germany> In: Sensors 2006, 6, 260-261 ISSN 1424-8220
KW  - Biosensor
KW  - I3S 2005
KW  - International Symposium on Sensor Science
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1365
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Otto, R.
A1  - Yoshinobu, T.
T1  - A handheld 16 channel pen-type LAPS as a platform for (bio-)electrochemical sensing
JF  - Biomedizinische Technik. 49 (2004), H. 2
Y1  - 2004
SN  - 0932-4666
SP  - 996
EP  - 997
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Shigiahara, N.
A1  - Miyamoto, K.
A1  - Suzurikawa, J.
A1  - Finger, F.
A1  - Schöning, Michael Josef
A1  - Yoshinobu, T.
T1  - Light-addressable Potentiometric Sensors and Light–addressable Electrodes as a Combined Sensor-and-manipulator Microsystem with High Flexibility
JF  - Procedia Engineering
N2  - This work describes the novel combination of the light-addressable electrode (LAE) and the light-addressable potentiometric sensor (LAPS) into a microsystem set-up. Both the LAE as well as the LAPS shares the principle of addressing the active spot by means of a light beam. This enables both systems to manipulate resp. to detect an analyte with a high spatial resolution. Hence, combining both principles into a single set-up enables the active stimulation e.g., by means of electrolysis and a simultaneous observation e.g., the response of an entrapped biological cell by detection of extracellular pH changes. The work will describe the principles of both technologies and the necessary steps to integrate them into a single set-up. Furthermore, examples of application and operation of such systems will be presented.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.proeng.2012.09.290
SN  - 1877-7058
N1  - Part of special issue "26th European Conference on Solid-State Transducers, EUROSENSOR 2012"
IS  - 47
SP  - 890
EP  - 893
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Vornholt, Wolfgang
A1  - Werner, Frederik
A1  - Yoshinobu, Tatsuo
A1  - Miyamoto, Ko-Ichiro
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Light-addressable potentiometric sensor (LAPS) combined with magnetic beads for pharmaceutical screening
JF  - Physics in medicine
N2  - The light-addressable potentiometric sensor (LAPS) has the unique feature to address different regions of a sensor surface without the need of complex structures. Measurements at different locations on the sensor surface can be performed in a common analyte solution, which distinctly simplifies the fluidic set-up. However, the measurement in a single analyte chamber prevents the application of different drugs or different concentrations of a drug to each measurement spot at the same time as in the case of multi-reservoir-based set-ups. In this work, the authors designed a LAPS-based set-up for cell culture screening that utilises magnetic beads loaded with the endotoxin (lipopolysaccharides, LPS), to generate a spatially distributed gradient of analyte concentration. Different external magnetic fields can be adjusted to move the magnetic beads loaded with a specific drug within the measurement cell. By recording the metabolic activities of a cell layer cultured on top of the LAPS surface, this work shows the possibility to apply different concentrations of a sample along the LAPS measurement spots within a common analyte solution.
Y1  - 2016
U6  - http://dx.doi.org/10.1016/j.phmed.2016.03.001
SN  - 2352-4510
VL  - 2016
IS  - 1
SP  - 2
EP  - 7
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Werner, Frederik
A1  - Miyamoto, K.
A1  - Schöning, Michael Josef
A1  - Yoshinobu, T.
T1  - A high-density multi-point LAPS set-up using a VCSEL array and FPGA control
JF  - Procedia Chemistry. 1 (2009), H. 1
Y1  - 2009
SN  - 1876-6196
N1  - Proceedings of the Eurosensors XXIII conference ; Eurosensors 23
SP  - 1483
EP  - 1486
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Werner, Frederik
A1  - Miyamoto, Ko-ichiro
A1  - Ackermann, Hans-Josef
A1  - Yoshinobu, Tatsuo
A1  - Schöning, Michael Josef
T1  - FPGA-based LAPS device for the flexible design of sensing sites on functional interfaces
JF  - Physica Status Solidi (A). 207 (2010), H. 4
Y1  - 2010
SN  - 1862-6300
N1  - Special Issue: Engineering of Functional Interfaces EnFI 2009
SP  - 844
EP  - 849
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Werner, Frederik
A1  - Miyamoto, Ko-Ichiro
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Development and characterisation of a compact light-addressable potentiometric sensor (LAPS) based on the digital light processing (DLP) technology for flexible chemical imaging
JF  - Sensors and Actuators B: Chemical
N2  - Chemical imaging systems allow the visualisation of the distribution of chemical species on the sensor surface. This work represents a new flexible approach to read out light-addressable potentiometric sensors (LAPS) with the help of a digital light processing (DLP) set-up. The DLP, known well for video projectors, consists of a mirror-array MEMS device, which allows fast and flexible generation of light patterns. With the help of these light patterns, the sensor surface of the LAPS device can be addressed. The DLP approach has several advantages compared to conventional LAPS set-ups, e.g., the spot size and the shape of the light pointer can be changed easily and no mechanical movement is necessary, which reduces the size of the set-up and increases the stability and speed of the measurement. In addition, the modulation frequency and intensity of the light beam are important parameters of the LAPS set-up. Within this work, the authors will discuss two different ways of light modulation by the DLP set-up, investigate the influence of different modulation frequencies and different light intensities as well as demonstrate the scanning capabilities of the new set-up by pH mapping on the sensor surface.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.snb.2010.12.003
SN  - 0925-4005
N1  - Part of special issue "Eurosensors XXIV, 2010"
VL  - 170
SP  - 34
EP  - 39
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Werner, Frederik
A1  - Miyamoto, Ko-Ichiro
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - A high-density multi-point LAPS set-up using a VCSEL array and FPGA control
JF  - Sensors and Actuators B: Chemical. 154 (2011), H. 2
Y1  - 2011
SN  - 1873-3077
N1  - EUROSENSORS XXIII
SP  - 124
EP  - 128
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Wagner, Torsten
A1  - Yoshinobu, T.
A1  - Otto, R.
A1  - Rao, C.
A1  - Molina, R.
A1  - Schöning, Michael Josef
T1  - Licht-adressierbare potentiometrische Sensorsysteme – Konzepte und Anwendungen
T2  - Sensoren und Mess-Systeme 2006 : Vorträge der 13. ITG/GMA-Fachtagung vom 13. bis 14.3.2006 in Freiburg/Breisgau
Y1  - 2006
SN  - 3-8007-2939-3
SP  - 165
EP  - 168
PB  - VDE Verl.
CY  - Berlin
ER  -