TY  - JOUR
A1  - Oberländer, Jan
A1  - Kirchner, Patrick
A1  - Boyen, Hans-Gerd
A1  - Schöning, Michael Josef
T1  - Detection of hydrogen peroxide vapor by use of manganese(IV) oxide as catalyst for calorimetric gas sensors
JF  - Physica status solidi A: Applications and materials science
N2  - In this work, the catalyst manganese(IV) oxide (MnO2), of calorimetric gas sensors (to monitor the sterilization agent vaporized hydrogen peroxide) has been investigated in more detail. Chemical analyses by means of X-ray-induced photoelectron spectroscopy have been performed to unravel the surface chemistry prior and after exposure to hydrogen peroxide vapor at elevated temperature, as applied in the sterilization processes of beverage cartons. The surface characterization reveals a change in oxidation states of the metal oxide catalyst after exposure to hydrogen peroxide. Additionally, a cleaning effect of the catalyst, which itself is attached to the sensor surface by means of a polymer interlayer, could be observed.
Y1  - 2014
U6  - https://doi.org/10.1002/pssa.201330359
SN  - 1521-396X (E-Journal); 1862-6319 (E-Journal); 0031-8965 (Print); 1862-6300 (Print)
VL  - 211
IS  - 6
SP  - 1372
EP  - 1376
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Oberländer, Jan
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Wendeler, Luisa
A1  - Bromm, Alexander
A1  - Iken, Heiko
A1  - Wagner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Study of Interdigitated Electrode Arrays Using Experiments and Finite Element Models for the Evaluation of Sterilization Processes
JF  - Sensors
N2  - In this work, a sensor to evaluate sterilization processes with hydrogen peroxide vapor has been characterized. Experimental, analytical and numerical methods were applied to evaluate and study the sensor behavior. The sensor set-up is based on planar interdigitated electrodes. The interdigitated electrode structure consists of 614 electrode fingers spanning over a total sensing area of 20 mm2. Sensor measurements were conducted with and without microbiological spores as well as after an industrial sterilization protocol. The measurements were verified using an analytical expression based on a first-order elliptical integral. A model based on the finite element method with periodic boundary conditions in two dimensions was developed and utilized to validate the experimental findings.
Y1  - 2015
U6  - https://doi.org/10.3390/s151026115
SN  - 1424-8220
N1  - This article belongs to the Special Issue "Gas Sensors—Designs and Applications"
VL  - 15
IS  - 10
SP  - 26115
EP  - 26127
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Wendeler, Luisa
A1  - Bromm, Alexander
A1  - Iken, Heiko
A1  - Wagner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Experimental and numerical evaluation of interdigitated electrode array for monitoring gaseous sterilization processes
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - https://doi.org/10.5162/12dss2015/P3.11
SP  - 163
EP  - 168
ER  - 
TY  - JOUR
A1  - Oberländer, Jan
A1  - Bromm, Alexander
A1  - Wendeler, Luisa
A1  - Iken, Heiko
A1  - Palomar Duran, Marlena
A1  - Greeff, Anton
A1  - Kirchner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Towards a biosensor to monitor the sterilisation efficiency of aseptic filling machines
JF  - Physica status solidi (a)
N2  - Sterilisation processes are compulsory in medicine, pharmacy, and food industries to prevent infections of consumers and microbiological contaminations of products. Monitoring the sterilisation by conventional microbiological methods is time- and lab-consuming. To overcome this problem, in this work a novel biosensor has been proposed. The sensor enables a fast method to evaluate sterilisation processes. By means of thin-film technology the sensor's transducer structures in form of IDEs (interdigitated electrodes) have been fabricated on a silicon substrate. Physical characterisation of the developed sensor was done by AFM, SEM, and profilometry. Impedance analyses were conducted for the electrical characterisation. As microbiological layer spores of B. atrophaeus have been immobilised on the sensing structure; spores of this type are a well-known sterilisation test organism. Impedance measurements at a fixed frequency over time were performed to monitor the immobilisation process. A sterilisation process according to aseptic filling machines was applied to demonstrate the sensor functionality. After both, immobilisation and sterilisation, a change in impedance could successfully be detected.
Y1  - 2015
U6  - https://doi.org/10.1002/pssa.201431900
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1299
EP  - 1305
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Arreola, Julio
A1  - Hansen, Christina
A1  - Greeff, Anton
A1  - Mayer, Marlena
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Impedimetric Biosensor to Enable Fast Evaluation of Gaseous Sterilization Processes
T2  - MDPI Proceedings
Y1  - 2017
U6  - https://doi.org/10.3390/proceedings1040435
N1  - Eurosensors 2017 Conference, Paris, France, 3–6 September 2017
VL  - 1
IS  - 4
ER  - 
TY  - CHAP
A1  - O\'Heras, Carlos
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
T1  - Nanostructured carbon-based column for LPS/protein adsorption : [abstract]
N2  - The absence of a general method for endotoxin removal from liquid interfaces gives an opportunity to find new methods and materials to overcome this gap. Activated nanostructured carbon is a promising material that showed good adsorption properties due to its vast pore network and high surface area. The aim of this study is to find the adsorption rates for a carboneous material produced at different temperatures, as well as to reveal possible differences between the performance of the material for each of the adsorbates used during the study (hemoglobin, serum albumin and lipopolysaccharide, LPS).
KW  - Kohlenstofffaser
KW  - Adsorption
KW  - Lipopolysaccharide
KW  - aktivierte nanostrukturierte Kohlenstofffaser
KW  - lipopolysaccharides
KW  - activated nanostructured carbon
Y1  - 2009
ER  - 
TY  - PAT
A1  - O'Connell, Timothy
A1  - Siegert, Petra
A1  - Maurer, Karl-Heinz
A1  - Schiedel, Marc-Steffen
A1  - Vockenroth, Inga Kerstin
T1  - Method for improving the cleaning action of a detergent or cleaning agent [Internationale Patentanmeldung]
T1  - Verfahren zur Verbesserung der Reinigungsleistung eines Wasch- oder Reinigungsmittels
Y1  - 2010
SP  - 1
EP  - 15
PB  - WIPO
CY  - Genf
ER  - 
TY  - CHAP
A1  - Nötzold, K.
A1  - Uphues, A.
A1  - Wegener, R.
A1  - Soter, S.
A1  - Fink, K.
A1  - Bragard, Michael
A1  - Griessel, R.
T1  - Inverter based test setup for LVRT verification of a full-scale 2 MW wind power converter
T2  - EPE Joint Wind Energy and T&D Chapters Seminar : 28th and 29th of June 2012, in the Utzon Centre, Aalborg, Denmark ; papers, posters, presentations. - Session 2: Grid connection, compliance
Y1  - 2012
PB  - EPE Association
CY  - Brussels
ER  - 
TY  - CHAP
A1  - Nötzold, K.
A1  - Uphues, A.
A1  - Wegener, R.
A1  - Fink, K.
A1  - Bragard, Michael
A1  - Griessel, R.
A1  - Soter, S.
T1  - Inverter based test setup for LVRT verification of a full-scale 2 MW wind power converter
T2  - 15th European Conference on Power Electronics and Applications (EPE), 2013 : 2 - 6 Sept. 2013, Lille, France / [EPE Association; PELS, IEEE Power Electronics Society]
Y1  - 2013
SN  - 978-1-4799-0115-9 (Online-Ausg.)
U6  - https://doi.org/10.1109/EPE.2013.6634752
SP  - 1037
EP  - 1042
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - PAT
A1  - Nötzold, K.
A1  - Bragard, Michael
A1  - Fink, K.
A1  - Griessel, R.
A1  - Wegener, R.
T1  - Cascaded H-bridge converter with transformer based cell power balancing in each voltage level  : [Patentschrift]
Y1  - 2014
N1  - Titel des US-Patents: Bypassed cascaded cell converter : [patent of invention]. - Außerdem veröffentlicht als CN103997231 (A)
PB  - Europäisches Patentamt / United States Patent and Trademark Office [u.a.]
CY  - Den Haag / Alexandria, VA
ER  -