TY  - JOUR
A1  - Luft, Angela
A1  - Bremen, Sebastian
A1  - Luft, Nils
T1  - A cost/benefit and flexibility evaluation framework for additive technologies in strategic factory planning
JF  - Processes
N2  - There is a growing demand for more flexibility in manufacturing to counter the volatility and unpredictability of the markets and provide more individualization for customers. However, the design and implementation of flexibility within manufacturing systems are costly and only economically viable if applicable to actual demand fluctuations. To this end, companies are considering additive manufacturing (AM) to make production more flexible. This paper develops a conceptual model for the impact quantification of AM on volume and mix flexibility within production systems in the early stages of the factory-planning process. Together with the model, an application guideline is presented to help planners with the flexibility quantification and the factory design process. Following the development of the model and guideline, a case study is presented to indicate the potential impact additive technologies can have on manufacturing flexibility Within the case study, various scenarios with different production system configurations and production programs are analyzed, and the impact of the additive technologies on volume and mix flexibility is calculated. This work will allow factory planners to determine the potential impacts of AM on manufacturing flexibility in an early planning stage and design their production systems accordingly.
KW  - additive manufacturing
KW  - factory planning
KW  - manufacturing flexibility
KW  - volume flexibility
KW  - mix flexibility
Y1  - 2023
U6  - http://dx.doi.org/10.3390/pr11071968
SN  - 2227-9717
VL  - 11
IS  - 7
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Lingens, Hans
A1  - Vollmann, Andreas
T1  - Fügetechnik an der FH Aachen - Aus- und Weiterbildung mit Praxisbezug
T2  - Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsfähigkeit steigert : Festschrift für Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)
Y1  - 2013
SN  - 978-3-86359-136-6
N1  - Gedruckt in der Bibliothek unter der Signatur: 21 PZI 73
SP  - 123
EP  - 127
PB  - Apprimus Verlag
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Leidinger, Rafael
A1  - Schürmann, Volker
A1  - Wollert, Jörg
A1  - Schneider, Christoph
T1  - Entwicklungsprojekt BASic - Bluetooth Authentication Service
T2  - Wireless Technologies : 12. Kongress, 22. - 23. September 2010, Bochum ; von der Technologie zur Anwendung / Jörg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 810)
Y1  - 2010
SN  - 978-3-18-381010-9
SP  - 296
EP  - 303
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Leidinger, Rafael
A1  - Noisten, Thomas
A1  - Wollert, Jörg
T1  - Realtime automation networks in moVing industrial environments
JF  - Journal of systemics, cybernetics and informatics
N2  - The radio-based wireless data communication has made the realization of new technical solutions possible in many fields of the automation technology (AT). For about ten years, a constant disproportionate growth of wireless technologies can be observed in the automation technology.
However, it shows that especially for the AT, conventional technologies of office automation are unsuitable and/or not manageable. The employment of mobile services in the industrial automation technology has the potential of significant cost and time savings. This leads to an increased productivity in various fields of the AT, for example in the factory and process automation or in production logistics. In this paper technologies and solutions for an automation-suited supply of mobile wireless services will be introduced under the criteria of real time suitability, IT-security and service orientation.
Emphasis will be put on the investigation and development of wireless convergence layers for different radio technologies, on the central provision of support services for an easy-to-use, central, backup enabled management of combined wired / wireless networks and on the study on integrability in a Profinet real-time Ethernet network.
KW  - PROFINET
KW  - Distributed Control Systems,
KW  - Industrial Automation Technology,
KW  - 802.15.4
KW  - Bluetooth
KW  - Wireless Networks
Y1  - 2012
SN  - 1690-4532
VL  - Vol. 10
IS  - Iss. 2
SP  - 52
EP  - 56
PB  - IIIC
CY  - Orlando
ER  - 
TY  - CHAP
A1  - König, Johannes Alexander
A1  - Wolf, Martin
T1  - A new definition of competence developing games - and a framework to assess them
T2  - ACHI 2016 : The Ninth International Conference on Advances in Computer-Human Interactions
N2  - There are different types of games that try to make use of the motivation of a gaming situation in learning contexts. This paper introduces the new terminology ‘Competence Developing Game’ (CDG) as an umbrella term for all games with this intention. Based on this new terminology, an assessment framework has been developed and validated in scope of an empirical study. Now, all different types of CDGs can be evaluated according to a defined and uniform set of assessment criteria and, thus, are comparable according to their characteristics and effectiveness.
KW  - Serious Games
KW  - Gamification
KW  - Business Simulations
KW  - Assessment
Y1  - 2016
SN  - 978-1-61208-468-8
N1  - Proceeding of the Ninth International Conference on Advances in Computer-Human Interactions (ACHI 2016), Venice.
SP  - 95
EP  - 97
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Thürigen, C.
A1  - Ehrfeld, W.
A1  - Hagemann, B.
T1  - Gesichtspunkte beim Miniaturisieren von Umlaufrädergetrieben. Thürigen, C.; Ehrfeld, W. ; Hagemann, B.; Kämper, K.-P.; Lehr, H.; Michel, F.
JF  - Innovative Kleinantriebe : Tagung Mainz, 9. und 10. Mai 1996 / VDE-VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik, GMM
Y1  - 1996
SN  - 3-18-091269-3
N1  - VDI-Berichte ; 1269
SP  - 235
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schulz, C.
A1  - Ehrfeld, W.
A1  - Erbel, R.
T1  - LIGA Fabricated Microsystems for Medical and Related Applications. Schulz, C.; Ehrfeld, W.; Erbel, R.; Kämper, K.-P.; Koch, L.; Lehr, H.; Roth, T.
JF  - 3-Day Course on Microengineering in Medicine and Biology and its Applications to Minimally Invasive Techniques for Therapy and Medical Diagnosis : EURO-BME 94; October 5, 6, and 7, 1994, Swiss Federal Institute of Technology, EPFL, Lausanne, Switzerland / [the 1994 EURO-BME Microengineering in Medicine and Biology Training Course. Staff: Christian D. Depeursinge ...]
Y1  - 1994
N1  - Microengineering in Medicine and Biology Training Course 1994, Lausanne
PB  - REPRO EPFL
CY  - Lausanne
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schulz, C.
A1  - Arnold, J.
A1  - Detter, H.
T1  - Anwendungen der LIGA-Technik für medizinische Diagnose- und Therapiesysteme. Schulz, C.; Arnold, J.; Detter, H.; Döpper, J.; Ehrfeld, W., Erbel, R.; Kämper, K.-P.; Koch, L.; Lehr, H.; Roth, T.
JF  - Elektrotechnik und Informationstechnik. 112 (1995), H. 9
Y1  - 1995
SN  - 0932-383X
SP  - 493
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Wesner, D. A.
A1  - Güntherodt, G.
T1  - Thickness dependence of the spin- and angle-resolved photoemission of ultrathin, epitaxial Ni(111)/W(110) layers
JF  - Applied Physics A: Materials Science and Processing. 49 (1989), H. 6
Y1  - 1989
SN  - 1432-0630
SP  - 573
EP  - 578
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Güntherodt, G.
A1  - Gambino, R. J.
T1  - CrO2—A New Half-Metallic Ferromagnet? Kämper, K.-P.; Schmitt, W.; Güntherodt, G.; Gambino, R. J., Ruf, R.
JF  - Physical Review Letters. 59 (1987), H. 24
Y1  - 1987
SN  - 1079-7114
SP  - 2788
EP  - 2791
ER  -