TY  - JOUR
A1  - Moorkamp, Wilfried
A1  - Peterson, Leif Arne
A1  - Uibel, Thomas
T1  - Mit guten Aussichten. Bericht über den Studiengang Holzingenieurwesen an der FH Aachen
JF  - Bauen mit Holz
Y1  - 2016
SN  - 0005-6545
N1  - gedruckte Zeitschrift in der Bereichsbibliothek Bayernallee
IS  - 5
SP  - 33
EP  - 36
PB  - Rudolf Müller
CY  - Köln
ER  - 
TY  - JOUR
A1  - Molinnus, Denise
A1  - Sorich, Maren
A1  - Bartz, Alexander
A1  - Siegert, Petra
A1  - Willenberg, Holger S.
A1  - Lisdat, Fred
A1  - Poghossian, Arshak
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Towards an adrenaline biosensor based on substrate recycling amplification in combination with an enzyme logic gate
JF  - Sensors and Actuators B: Chemical
N2  - An amperometric biosensor using a substrate recycling principle was realized for the detection of low adrenaline concentrations (1 nM) by measurements in phosphate buffer and Ringer’s solution at pH 6.5 and pH 7.4, respectively. In proof-of-concept experiments, a Boolean logic-gate principle has been applied to develop a digital adrenaline biosensor based on an enzyme AND logic gate. The obtained results demonstrate that the developed digital biosensor is capable for a rapid qualitative determination of the presence/absence of adrenaline in a YES/NO statement. Such digital biosensor could be used in clinical diagnostics for the control of a correct insertion of a catheter in the adrenal veins during adrenal venous-sampling procedure.
Y1  - 2016
U6  - http://dx.doi.org/10.1016/j.snb.2016.06.064
SN  - 0925-4005
VL  - 237
SP  - 190
EP  - 195
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamoto, Ko-ichiro
A1  - Yu, Bing
A1  - Isoda, Hiroko
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Visualization of the recovery process of defects in a cultured cell layer by chemical imaging sensor
JF  - Sensors and Actuators B: Chemical
N2  - The chemical imaging sensor is a field-effect sensor which is able to visualize both the distribution of ions (in LAPS mode) and the distribution of impedance (in SPIM mode) in the sample. In this study, a novel cell assay is proposed, in which the chemical imaging sensor operated in SPIM mode is applied to monitor the recovery of defects in a cell layer brought into proximity of the sensing surface. A reduced impedance at a defect formed artificially in a cell layer was successfully visualized in a photocurrent image. The cell layer was cultured over two weeks, during which the temporal change of the photocurrent distribution corresponding to the recovery of the defect was observed.
Y1  - 2016
U6  - http://dx.doi.org/10.1016/j.snb.2016.04.018
SN  - 0925-4005
VL  - 236
SP  - 965
EP  - 969
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamoto, Ko-Ichiro
A1  - Sato, Takuya
A1  - Abe, Minami
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Light-addressable potentiometric sensor as a sensing element in plug-based microfluidic devices
JF  - Micromachines
N2  - A plug-based microfluidic system based on the principle of the light-addressable potentiometric sensor (LAPS) is proposed. The LAPS is a semiconductor-based chemical sensor, which has a free addressability of the measurement point on the sensing surface. By combining a microfluidic device and LAPS, ion sensing can be performed anywhere inside the microfluidic channel. In this study, the sample solution to be measured was introduced into the channel in a form of a plug with a volume in the range of microliters. Taking advantage of the light-addressability, the position of the plug could be monitored and pneumatically controlled. With the developed system, the pH value of a plug with a volume down to 400 nL could be measured. As an example of plug-based operation, two plugs were merged in the channel, and the pH change was detected by differential measurement.
KW  - light-addressable potentiometric sensor
KW  - plug-based microfluidic device
KW  - chemical sensor
Y1  - 2016
U6  - http://dx.doi.org/10.3390/mi7070111
SN  - 2072-666X
N1  - This article belongs to the Special Issue "Micro/Nano Devices for Chemical Analysis"
VL  - 7
IS  - 7
SP  - 111
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Matcha, Heike
ED  - Herneoja, Aulikki
ED  - Österlund, Toni
ED  - Markkanen, Piia
T1  - From Designing Buildings from Systems to Designing Systems for Buildings
T2  - Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1
N2  - We study the novel possibilities computer aided design and production open up for the design of building systems. Such systems today can, via individualized mass production, consist of a larger number and more complex parts than previously and therefore be assembled into more complex wholes. This opens up the possibility of designing specialized systems specifically for single buildings. The common order of starting with a building system and designing a building using this system can be reversed to designing a building first and then developing a system specifically for that building. We present and discuss research that incorporates students design projects into research work and fosters links between research and teaching.
KW  - Building Systems
KW  - Parametric Design
KW  - Parametric Modelling
KW  - Structuralist Architecture
Y1  - 2016
U6  - http://dx.doi.org/10.52842/conf.ecaade.2016.1.237
N1  - Proceedings of the 34th eCAADe Conference, University of Oulu, Oulu, Finland, 22-26 August 2016.
SP  - 237
EP  - 240
PB  - ECAADe
CY  - Oulu, Finland
ER  - 
TY  - CHAP
A1  - Martin, Joachim
A1  - Martin, Angelika
T1  - Größen, Formeln, Bemessung
T2  - Zahlentafeln für den Baubetrieb
N2  - Das Kapitel 1 vermittelt eine Übersicht für den schnellen Gebrauch von Größen, Einheiten und Zeichen. Es folgt die Darstellung wichtiger Grundlagen der Mathematik, Lastannahmen und einfacher statischer Systeme. Schließlich werden Hinweise zu charakteristischen Festigkeiten und Tragfähigkeitsnachweisen für Berechnungen im Mauerwerk, Holz- und Stahlbau sowie Stahlbetonbau gegeben. Für eine weitere Vertiefung des Themas empfiehlt sich der Wendehorst Bautechnische Zahlentafel
Y1  - 2016
SN  - 978-3-658-02838-1 (Online)
SN  - 978-3-658-02837-4 (Print)
U6  - http://dx.doi.org/10.1007/978-3-658-02838-1_1
SP  - 1
EP  - 61
PB  - Springer Vieweg
CY  - Wiesbaden
ET  - 9., überarb. und aktual. Aufl.
ER  - 
TY  - CHAP
A1  - Martin, Joachim
T1  - Betriebsorganisation
T2  - Zahlentafeln für den Baubetrieb
N2  - Das Kapitel behandelt, ausgehend von Begriffen und Aufgaben der Betriebsorganisation, die Aufbau- und Ablauforganisation der Bauunternehmung sowie die Gestaltung einer Projekt-organisation. Es folgt eine Darstellung der Managementsysteme für Qualität, Umwelt und Arbeitsschutz, die sich zunehmend als sog. integrierte Managementsysteme (IMS) auch in Bauunternehmen etablieren. Grundlagen des Personalmanagements und des betrieblichen Rechnungswesens, die für eine(n) Baubetriebler(in) relevant sein können, ergänzen das Kap. Betriebsorganisation. Den Abschluss bilden Hinweise zum Berichtswesen der Baustelle.
Y1  - 2016
SN  - 978-3-658-02838-1 (Online)
SN  - 978-3-658-02837-4 (Print)
U6  - http://dx.doi.org/10.1007/978-3-658-02838-1_12
SP  - 1297
EP  - 1389
PB  - Springer Vieweg
CY  - Wiesbaden
ET  - 9., überarb. und aktual. Aufl.
ER  - 
TY  - CHAP
A1  - Marinova, V.
A1  - Kerroumi, I.
A1  - Lintermann, A.
A1  - Göbbert, J.H.
A1  - Moulinec, C.
A1  - Rible, S.
A1  - Fournier, Y.
A1  - Behbahani, Mehdi
T1  - Numerical Analysis of the FDA Centrifugal Blood Pump
T2  - NIC Symposium 2016
Y1  - 2016
SN  - 978-3-95806-109-5
SP  - 355
EP  - 364
ER  - 
TY  - CHAP
A1  - Lu, S.
A1  - Beyer, K.
A1  - Bosiljkov, V.
A1  - Butenweg, Christoph
A1  - D’Ayala, D.
A1  - Degee, H.
A1  - Gams, M.
A1  - Klouda, J.
A1  - Lagomarsino, S.
A1  - Penna, A.
A1  - Mojsilovic, N.
A1  - da Porto, F.
A1  - Sorrentino, L.
A1  - Vintzileou, E.
ED  - Modena, Claudio
ED  - da Porto, F.
ED  - Valluzzi, M.R.
T1  - Next generation of Eurocode 8, masonry chapter
T2  - Brick and Block Masonry Proceedings of the 16th International Brick and Block Masonry Conference, Padova, Italy, 26-30 June 2016
N2  - This paper describes the procedure on the evaluation of the masonry chapter for the next generation of Eurocode 8, the European Standard for earthquake-resistant design. In CEN, TC 250/SC8, working group WG 1 has been established to support the subcommittee on the topic of masonry on both design of new structures (EN1998-1) and assessment of existing structures (EN1998-3). The aim is to elaborate suggestions for amendments which fit the current state of the art in masonry and earthquake-resistant design. Focus will be on modelling, simplified methods, linear-analysis (q-values, overstrength-values), nonlinear procedures, out-of-plane design as well as on clearer definition of limit states. Beside these, topics related to general material properties, reinforced masonry, confined masonry, mixed structures and non-structural infills will be covered too. This paper presents the preliminary work and results up to the submission date.
Y1  - 2016
SN  - 978-1-138-02999-6 (Print)
SN  - 9781315374963 (E-Book)
SP  - 695
EP  - 700
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - BOOK
A1  - Lohse, Wolfram
A1  - Laumann, Jörg
A1  - Wolf, Christian
T1  - Stahlbau, 1: Bemessung von Stahlbauten nach Eurocode mit zahlreichen Beispielen
Y1  - 2016
SN  - 978-3-8348-0867-7
SN  - 978-3-8348-2058-7
U6  - http://dx.doi.org/10.1007/978-3-8348-2058-7
PB  - Springer Vieweg
CY  - Wiesbaden
ET  - 25., überarbeitete und aktualisierte Auflage
ER  -