TY  - GEN
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
A1  - Reindl, Lukas
A1  - Meskouris, Konstantin
T1  - A nonlinear method for the seismic safety verification of masonry buildings
N2  - In order for traditional masonry to stay a competitive building material in seismically active regions there is an urgent demand for modern, deformation-based verification procedures which exploit the nonlinear load bearing reserves. The Capacity Spectrum Method (CSM) is a widely accepted design approach in the field of reinforced concrete and steel construction. It compares the seismic action with the load-bearing capacity of the building considering nonlinear material behavior with its post-peak capacity. The bearing capacity of the building is calculated iteratively using single wall capacity curves. This paper presents a new approach for the bilinear approximation of single wall capacity curves in the style of EC6/EC8 respectively FEMA 306/FEMA 356 based on recent shear wall test results of the European Collective-Research Project “ESECMaSE”. The application of the CSM to masonry structures by using bilinear approximations of capacity curves as input is demonstrated on the example of a typical German residential home.
Y1  - 2009
N1  - COMPDYN 2009 - 2nd International Conference on Computational Methods in Structural Dynamics & Earthquake Engineering. Isles of Rhodes, Greece, June 22-24,2009.
PB  - National Technical University of Athens
CY  - Athen
ER  - 
TY  - JOUR
A1  - Hodel, U.
A1  - Orzati, A.
A1  - Marso, M.
A1  - Homann, O.
A1  - Fox, A.
A1  - Hart, A. v. d.
A1  - Förster, Arnold
A1  - Kordos, P.
A1  - Lüth, H.
T1  - A novel InAlAs/InGaAs layer structure for monolithically integrated photoreceiver
JF  - Conference Proceedings: 2000 International Conference on Indium Phosphide and related materials
Y1  - 2000
SN  - 0-7803-6320-5
N1  - International Conference on Indium Phosphide and Related Materials <12, 2000, Williamsburg, Va.>
SP  - 466
EP  - 469
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Park, Jin
A1  - El-Daib, Khaled
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
T1  - A novel macroelement approach for masonry walls
T2  - Proceedings of the 8th International Conference on Structural Dynamics, EURODYN 2011 : Leuven, Belgium, 4 - 6 July 2011 / Katholieke Universiteit Leuven, ... G. De Roeck ... (eds)
Y1  - 2011
SN  - 978-90-76019-31-4
SP  - 3281
EP  - 3286
PB  - K. U. Leuven, Dep. of Civil Engineering
CY  - Leuven
ER  - 
TY  - CHAP
A1  - Philipp, Brauner
A1  - Brillowski, Florian Sascha
A1  - Dammers, Hannah
A1  - Königs, Peter
A1  - Kordtomeikel, Frauke Carole
A1  - Petruck, Henning
A1  - Schaar, Anne Kathrin
A1  - Schmitz, Seth
A1  - Steuer-Dankert, Linda
A1  - Mertens, Alexander
A1  - Gries, Thomas
A1  - Leicht-Scholten, Carmen
A1  - Nagel, Saskia K.
A1  - Nitsch, Verena
A1  - Schuh, Günther
A1  - Ziefle, Martina
ED  - Mrugalska, Beata
ED  - Trzcielinski, Stefan
ED  - Karwowski, Waldemar
ED  - Nicolantonio, Massimo Di
ED  - Roossi, Emilio
T1  - A research framework for human aspects in the internet of production: an intra-company perspective
T2  - Proceedings of the AHFE 2020
N2  - Digitalization in the production sector aims at transferring concepts and methods from the Internet of Things (IoT) to the industry and is, as a result, currently reshaping the production area. Besides technological progress, changes in work processes and organization are relevant for a successful implementation of the “Internet of Production” (IoP). Focusing on the labor organization and organizational procedures emphasizes to consider intra-company factors such as (user) acceptance, ethical issues, and ergonomics in the context of IoP approaches. In the scope of this paper, a research approach is presented that considers these aspects from an intra-company perspective by conducting studies on the shop floor, control level and management level of companies in the production area. Focused on four central dimensions—governance, organization, capabilities, and interfaces—this contribution presents a research framework that is focused on a systematic integration and consideration of human aspects in the realization of the IoP.
KW  - Human factors
KW  - Digitalization
KW  - Acceptance
KW  - Ethics
KW  - Human-robot collaboration
Y1  - 2020
SN  - 978-3-030-51980-3
U6  - https://doi.org/10.1007/978-3-030-51981-0_1
N1  - AHFE 2020 Virtual Conferences on Human Aspects of Advanced Manufacturing, Advanced Production Management and Process Control, and Additive Manufacturing, Modeling Systems and 3D Prototyping, July 16–20, 2020, USA
SP  - 3
EP  - 17
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Hoyler, Friedrich
A1  - Collins, S. P.
A1  - Eid, S. A.
T1  - A search for mixed-symmetry states in the mass A approximately 50 region / S. P. Collins ; S. A. Eid ... F. Hoyler
JF  - Journal of Physics G. 15 (1989), H. 3
Y1  - 1989
SN  - 0954-3899
SP  - 321
EP  - 332
ER  - 
TY  - CHAP
A1  - Mistler, Michael
A1  - Butenweg, Christoph
T1  - A seismic design procedure for masonry buildings
T2  - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping
Y1  - 2005
SN  - 1-905088-00-0
U6  - https://doi.org/10.4203/ccp.81.193
SP  - 465
EP  - 467
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - JOUR
A1  - Pieper, Martin
A1  - Klein, Peter
T1  - A simple and accurate numerical network flow model for bionic micro heat exchangers
JF  - Heat mass transfer
Y1  - 2011
SN  - 0947-7411
VL  - 47
IS  - 5
SP  - 491
EP  - 503
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Hardt, Arno
A1  - Köhler, M.
A1  - Müller, K. D.
A1  - Stoff, H.
T1  - A two-dimensional position sensitive charged-particle detector for the magnetic spectrograph "BIG KARL" of the Jülich Cyclotron "JULIC". M. Köhler, K. D. Müller, H. Stoff, M. Teske, G. P. A. Berg, A. Hardt, S. Martin, C. Mayer-Böricke ,  J. Meißburger
JF  - Nuclear Instruments and Methods. 75 (1980), H. 2-3
Y1  - 1980
SN  - 0029-554X
SP  - 357
EP  - 362
ER  - 
TY  - JOUR
A1  - Stock, J.
A1  - Malindretos, J.
A1  - Indlekofer, K.M.
A1  - Pöttgens, Michael
A1  - Förster, Arnold
A1  - Lüth, Hans
T1  - A Vertical Resonant Tunneling Transistor for Application in Digital Logic Circuits
JF  - IEEE Transactions on Electron Devices (T-ED). 48 (2001), H. 6
Y1  - 2001
SN  - 0018-9383
SP  - 1028
EP  - 1032
ER  - 
TY  - GEN
A1  - Steuer-Dankert, Linda
A1  - Bernhard, Sebastian
A1  - Langolf, Jessica
A1  - Leicht-Scholten, Carmen
T1  - About the paradox of sustainable production and what we can do about it!
T2  - Joint SCORAI-ERSCP-WUR conference on transforming consumption-production systems toward just and sustainable futures (SCP23)
N2  - Sustainability is playing an increasingly important role. Not least due to the definition of the sustainable development goals (SDGs) in the framework of the agenda 2030 by the United Nations (UN) in 2015 (United Nations, n.d.), it has become clear that the cooperation of different actors is needed to achieve the defined 17 goals. Industry, as a global actor, has a special role to play in this. In the course of sustainable production processes and chains, the industry is confronted with the responsibility of reflecting on the consequences of its own trade on an ecological, economic, and also social level and deriving measures that, according to the definition of sustainability (Hauff, 1987), will also enable future generations to satisfy their needs. While the ecological pillar of sustainability is already being addressed by different industrial initiatives (Deloitte, 2021), it is questionable to what extent the economic and, above all, the social pillars of sustainability also play a decisive role. Accordingly, it is questionable to what extent sustainability in its triad of social, ecological, and economic aspects is taken into account holistically at all, and thus to what extent the industry contributes to achieving the 17 goals defined by the UN.
This paper presents a qualitative study that explores these questions. Interviewing 31 representatives from the manufacturing industry in Germany, results indicate a Paradox of Sustainable Production expressed by a theoretical reflection of the need for focusing on people in production processes on the one hand and a lack of addressing the social pillar of sustainability in concepts on the other hand. However, while it is a troublesome finding given the striking need for sustainable development (The-Sustainable-Development-Goals-Report-2022; Kropp 2019; von Hauff 2021; Roy and Singh 2017), the paradox directly lays out a path of resolving it. This is because, given its nature, we can see that we could resolve it via the implementation of strong educational efforts trying to help the respective people of the manufacturing industry to understand the holistic and interdependent character of sustainable development (The-Sustainable-Development-Goals-Report-2022).
Y1  - 2023
N1  - Volltext auf dem Opus-Server verfügbar
ER  -