TY  - JOUR
A1  - Tippkötter, Nils
A1  - Roth, Jasmine
T1  - Purified Butanol from Lignocellulose – Solvent‐Impregnated Resins for an Integrated Selective Removal
JF  - Chemie Ingenieur Technik
N2  - In traditional microbial biobutanol production, the solvent must be recovered during fermentation process for a sufficient space-time yield. Thermal separation is not feasible due to the boiling point of n-butanol. As an integrated and selective solid-liquid separation alternative, solvent impregnated resins (SIRs) were applied. Two polymeric resins were evaluated and an extractant screening was conducted. Vacuum application with vapor collection in fixed-bed column as bioreactor bypass was successfully implemented as butanol desorption step. In course of further increasing process economics, fermentation with renewable lignocellulosic substrates was conducted using Clostridium acetobutylicum. Utilization of SIR was shown to be a potential strategy for solvent removal from fermentation broth, while application of a bypass column allows for product removal and recovery at once.
KW  - Biofuel
KW  - Biorefinery
KW  - Butanol
KW  - Clostridium acetobutylicum
KW  - Lignocellulose
Y1  - 2020
U6  - https://doi.org/10.1002/cite.202000200
SN  - 1522-2640
N1  - Corresponding author: Nils Tippkötter
VL  - 92
IS  - 11
SP  - 1741
EP  - 1751
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Pietsch, Wolfram
A1  - Herzwurm, G.
T1  - QFD for Customer-Focused Requirements Engineering / Herzwurm, G., Pietsch, W.
JF  - Proceedings : 8 - 12 September 2003, Monterey Bay, California, USA / sponsored by IEEE Computer Society Technical Council on Software Engineering (TCSE) ... In cooperation with ACM SigSOFT
Y1  - 2003
SN  - 0769519806
N1  - International Requirements Engineering Conference ; (11, 2003, Monterey, Calif.)
SP  - 330
EP  - 338
PB  - IEEE Computer Society
CY  - Los Alamitos, Calif. [u.a.]
ER  - 
TY  - JOUR
A1  - Höttges, Jörg
T1  - QKan - Management of drainage system data with QGIS
JF  - Free and Open Source Software for Geospatial (FOSS4G) Conference Proceedings
Y1  - 2017
VL  - 17
IS  - Article 13
SP  - 95
EP  - 100
ER  - 
TY  - JOUR
A1  - Schuba, Marko
A1  - Schneider, Gaby
A1  - Haverkort, Boudewijn R.
T1  - QNA-MC: A Performance Evaluation Tool for Communication Networks with Multicast Data Streams / Schneider, G. ; Schuba, M. ; Haverkort, B. R.
JF  - Computer Performance Evaluation - Modelling Techniques and Tools / Puigjaner, Ramon (eds.)
Y1  - 1998
SN  - 3-540-64949-2
N1  - Lecture notes in computer  science ; 1469
SP  - 105
EP  - 116
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Raffeis, Iris
A1  - Adjei-Kyeremeh, Frank
A1  - Vroomen, Uwe
A1  - Westhoff, Elmar
A1  - Bremen, Sebastian
A1  - Hohoi, Alexandru
A1  - Bührig-Polaczek, Andreas
T1  - Qualification of a Ni-Cu alloy for the laser powder bed fusion process (LPBF): Its microstructure and mechanical properties
JF  - Applied Sciences
N2  - As researchers continue to seek the expansion of the material base for additive manufacturing, there is a need to focus attention on the Ni–Cu group of alloys which conventionally has wide industrial applications. In this work, the G-NiCu30Nb casting alloy, a variant of the Monel family of alloys with Nb and high Si content is, for the first time, processed via the laser powder bed fusion process (LPBF). Being novel to the LPBF processes, optimum LPBF parameters were determined, and hardness and tensile tests were performed in as-built conditions and after heat treatment at 1000 °C. Microstructures of the as-cast and the as-built condition were compared. Highly dense samples (99.8% density) were achieved after varying hatch distance (80 µm and 140 µm) with scanning speed (550 mm/s–1500 mm/s). There was no significant difference in microhardness between varied hatch distance print sets. Microhardness of the as-built condition (247 HV0.2) exceeded the as-cast microhardness (179 HV0.2.). Tensile specimens built in vertical (V) and horizontal (H) orientations revealed degrees of anisotropy and were superior to conventionally reported figures. Post heat treatment increased ductility from 20% to 31% (V), as well as from 16% to 25% (H), while ultimate tensile strength (UTS) and yield strength (YS) were considerably reduced.
Y1  - 2020
U6  - https://doi.org/10.3390/app10103401
SN  - 2076-3417
N1  - Special Issue Materials Development by Additive Manufacturing Techniques
VL  - 10
IS  - Art. 3401
SP  - 1
EP  - 15
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Wolf, Martin R.
A1  - Simon, S.
A1  - Schlick, Christopher
T1  - Qualitative and Quantitative Analysis of Cooperation / Wolf, M. ; Simon, S. ; Schlick, C.
JF  - Proceedings : May 26 - 29, 1998, Cannes (France) = Actes : 26 - 29 mai 1998 / INRIA, Institut National de Recherche en Informatique et en Automatique, Unité de recherche ... F. Darses ..., eds
Y1  - 1998
N1  - COOP ; Institut National de Recherche en Informatique et en Automatique ; Centre ; (Sophia Antipolis) ; International Conference on the Design of Cooperative Systems ; (3 ; 1998.05.26-29 ; Cannes) ; Conference Internationale sur la Conception de Systèmes Coopératifs ; (3 ; 1998.05.26-29 ; Cannes) ; COOP ; (3 ; 1998.05.26-29 ; Cannes)
SP  - 1
EP  - 5
PB  - -
CY  - Cannes
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
A1  - Schiffer, Stefan
A1  - Lakemeyer, Gerhard
T1  - Qualitative World Models for Soccer Robots / Schiffer, Stefan ; Ferrein, Alexander ; Lakemeyer, Gerhard
JF  - Qualitative constraint calculi : application and integration ; KI 2006, 14 - 19 June 2006, Bremen, Germany ; 29th Annual German Conference on Artificial Intelligence ; workshop / Stefan Wölfl ... (eds.)
Y1  - 2006
SN  - 3-88722-666-6
SP  - 3
EP  - 14
PB  - Univ.
CY  - Bremen
ER  - 
TY  - JOUR
A1  - Kunkel, Maximilian Hugo
A1  - Gebhardt, Andreas
A1  - Mpofu, Khumbulani
A1  - Kallweit, Stephan
T1  - Quality assurance in metal powder bed fusion via deep-learning-based image classification
JF  - Rapid Prototyping Journal
Y1  - 2019
U6  - https://doi.org/10.1108/RPJ-03-2019-0066
SN  - 1355-2546
VL  - 26
IS  - 2
SP  - 259
EP  - 266
ER  - 
TY  - JOUR
A1  - Biener, Ernst
A1  - Sasse, T.
T1  - Quality improvements in the construction of multilayer covers
JF  - Géologie et confinement des déchets toxiques : actes du symposium international, 8 - 11 juin 1993 / GEOCONFINE 93, Montpellier, France. Réd. Marcel Arnould
Y1  - 1993
SN  - 90-5410-330-2
N1  - Geoconfine <1993, Montpellier> ; Paralellt.: Geology and confinement of toxic wastes
SP  - 309
EP  - 312
PB  - Balkema
CY  - Rotterdam [u.a.]
ER  - 
TY  - JOUR
A1  - Schäfer, Horst
A1  - Gerschütz, J.
A1  - Scholl, S.
A1  - Fischer, A. (u.a.)
T1  - Quanten-Hall-Effekt in CdTe/Cd1-X MgX Te Heterostrukturen
Y1  - 1995
N1  - Als Poster vorgelegt auf der Frühjahrstagung der DPG in Berlin, 20.-24. März 1995, Verhandl. DPG (VI) 30, HL 33.52 / Physikalisches Institut der Universität Würzburg.
ER  -