TY  - JOUR
A1  - Tippkötter, Nils
A1  - Deterding, A.
A1  - Ulber, Roland
T1  - Determination of acetic acid in fermentation broth by gas-diffusion technique
JF  - Engineering in Life Sciences
N2  - Due to the interfering effects of acetic acid in many fermentation processes, a gas-diffusion technique was developed for the online determination of acetic acid. The measurements were accomplished with a flow diffusion analysis (FDA) unit from the TRACE Analytics GmbH, Braunschweig, Germany. The diffusion analysis is based on the UV-absorbance of acetic acid at 205 nm. The measurement was achieved by the separation of an acceptor and a carrier stream (acidified fermentation broth) using a gas permeable polytetrafluoroethylene (PTFE) membrane, whereby broth constituents that would otherwise disturb the UV-measurement of acetic acid, are held back efficiently. Merely, the fermentation by-products, e.g. formic acid, is capable of diffusing through the membrane. While formic acid can disturb the measurement, carbon dioxide does not absorb at 205 nm. The method operates with time-dependent sample enrichment. During the analysis, a small volume of the acceptor stream is stopped for a defined time interval in the acceptor chamber. During this period, the gaseous acetic acid diffuses through the membrane and is enriched in the acceptor chamber. Subsequently after the enrichment, the acceptor stream flows through a UV-detector. The intensity of the signal is proportional to the acetic acid concentration. Online measurements in bioreactors via a sterile filtration probe have been accomplished. A linear calibration in the range of 0.5–5.0 g/L acetic acid with a relative standard deviation of <5 % was obtained. A sampling rate of 8 samples per hour was possible. The system was applied for the determination of acetic acid in E. coli fermentation broth. The instrument is easy to clean, very user-friendly and does not require any toxic or expensive reagents.
Y1  - 2008
U6  - http://dx.doi.org/10.1002/elsc.200820227
VL  - 8
IS  - 1, Special Issue: Technical Systems for the Use in Life Sciences
SP  - 62
EP  - 67
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Kloock, Joachim P.
A1  - Schöning, Michael Josef
T1  - Determination of cadmium concentration and pH value in aqueous solutions by means of a handheld light-addressable potentiometric sensor (LAPS) device
JF  - Electrochemical sensor analysis / edited by S. Alegret ...
Y1  - 2007
SN  - 978-0-444-53133-9
N1  - Wilson & Wilson's comprehensive analytical chemistry ; 49
SP  - e35
EP  - e44
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Helsper, Christoph
A1  - Fißan, H. J.
A1  - Thielen, H. J.
T1  - Determination of Particle Size Distributions by Means of an Electrostatic Classifier / Fißan, H. J.; Helsper, C. ; Thielen, H. J.
JF  - Journal of Aerosol Science. 14 (1983), H. 3
Y1  - 1983
SN  - 0021-8502
SP  - 354
EP  - 357
ER  - 
TY  - JOUR
A1  - Förster, Arnold
A1  - Tillmann, K.
A1  - Thust, M.
T1  - Determination of segregation, elastic strain and thin-foil relaxation in InxGa-1-x As islands on GaAs(001) by high resolution transmission electron microscopy / K. Tillmann ; A. Thust ; M. Lentzen ... A. Förster ...
JF  - Philosophical magazine / Letters. 74 (1996), H. 5
Y1  - 1996
SN  - 1362-3036
SP  - 309
EP  - 315
ER  - 
TY  - JOUR
A1  - Helsper, Christoph
A1  - Wiedensohler, A.
A1  - Weise, W.
A1  - Lütkemeier, E.
T1  - Determination of the Bipolar Charge Equilibrium in Pure Gases / Wiedensohler, A. ; Weise, W. ; Helsper, C. ; Lütkemeier, E.
JF  - Aerosols : formation and reactivity ; proceedings of the second International Aerosol Conference, 22-26 Sept. 1986, Berlin (West) / Gesellschaft für Aerosolforschung (GAeF) ; American Association for Aerosol Research (AAAR)
Y1  - 1986
N1  - International Aerosol Conference ; (2, 1986, Berlin (West))
SP  - 383
EP  - 386
PB  - Pergamon Press
CY  - Oxford [u.a.]
ER  - 
TY  - JOUR
A1  - Maggakis-Kelemen, Christina
A1  - Biselli, Manfred
A1  - Artmann, Gerhard
T1  - Determination of the elastic shear modulus of cultured human red blood cells
JF  - Biomedizinische Technik. 47 (2002), H. Suppl. 1 Pt. 1
Y1  - 2002
SN  - 0013-5585
N1  - Druckausgabe unter 63 Z 471 vorhanden
SP  - 106
EP  - 109
ER  - 
TY  - JOUR
A1  - Werner, Frederik
A1  - Krumbe, Christoph
A1  - Schumacher, Katharina
A1  - Groebel, Simone
A1  - Spelthahn, Heiko
A1  - Stellberg, Michael
A1  - Wagner, Torsten
A1  - Yoshinobu, Tatsuo
A1  - Selmer, Thorsten
A1  - Keusgen, Michael
A1  - Baumann, Marcus
A1  - Schöning, Michael Josef
T1  - Determination of the extracellular acidification of Escherichia coli by a light-addressable potentiometric sensor
JF  - Physica status solidi (a) : applications and material science. 208 (2011), H. 6
Y1  - 2011
SN  - 1862-6319
SP  - 1340
EP  - 1344
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Dantism, Shahriar
A1  - Takenaga, Shoko
A1  - Wagner, Patrick
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Determination of the extracellular acidification of Escherichia coli K12 with a multi-​chamber-​based LAPS system
JF  - Physica status solidi (a)
N2  - On-line monitoring of the metabolic activity of microorganisms involved in intermediate stages of biogas production plays an important role to avoid undesirable “down times” during the biogas production. In order to control this process, an on-chip differential measuring system based on the light-addressable potentiometric sensor (LAPS) principle combined with a 3D-printed multi-chamber structure has been realized. As a test microorganism, Escherichia coli K12 (E. coli K12) were used for cell-based measurements. Multi-chamber structures were developed to determine the metabolic activity of E. coli K12 in suspension for a different number of cells, responding to the addition of a constant or variable amount of glucose concentrations, enabling differential and simultaneous measurements.
Y1  - 2016
U6  - http://dx.doi.org/10.1002/pssa.201533043
SN  - 1862-6300
VL  - 213
IS  - 6
SP  - 1479
EP  - 1485
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Hasan, Istabrak
A1  - Keil, Ludger
A1  - Staat, Manfred
A1  - Wahl, Gerhard
A1  - Bourauel, Christoph
T1  - Determination of the frictional coefficient of the implant-antler interface : experimental approach
JF  - Biomedical Engineering / Biomedizinische Technik
N2  - The similar bone structure of reindeer antler to human bone permits studying the osseointegration of dental implants in the jawbone. As the friction is one of the major factors that have a significant influence on the initial stability of immediately loaded dental implants, it is essential to define the frictional coefficient of the implant-antler interface. In this study, the kinetic frictional forces at the implant-antler interface were measured experimentally using an optomechanical setup and a stepping motor controller under different axial loads and sliding velocities. The corresponding mean values of the static and kinetic frictional coefficients were within the range of 0.5–0.7 and 0.3–0.5, respectively. An increase in the frictional forces with increasing applied axial loads was registered. The measurements showed an evidence of a decrease in the magnitude of the frictional coefficient with increasing sliding velocity. The results of this study provide a considerable assessment to clarify the suitable frictional coefficient to be used in the finite element contact analysis of antler specimens.
Y1  - 2012
SN  - 1862-278X
VL  - 57
IS  - 5
SP  - 359
EP  - 363
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Arpshofen, Ingo
A1  - Pool, M. J.
A1  - Sommer, Ferdinand
A1  - Gerling, Ulrich
A1  - Predel, Bruno
A1  - Schultheiss, Emil
T1  - Determination of the integral mixing enthalpies in the Cu-Pd-Si liquid ternary alloy system at 1600 K
JF  - Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. Bd. 74, H. 1
Y1  - 1983
SN  - 0044-3093 ; 0179-4841
SP  - 25
EP  - 32
ER  -