TY  - JOUR
A1  - Topçu, Murat
A1  - Madabhushi, Gopal S.P.
A1  - Staat, Manfred
T1  - A generalized shear-lag theory for elastic stress transfer between matrix and fibres having a variable radius
JF  - International Journal of Solids and Structures
N2  - A generalized shear-lag theory for fibres with variable radius is developed to analyse elastic fibre/matrix stress transfer. The theory accounts for the reinforcement of biological composites, such as soft tissue and bone tissue, as well as for the reinforcement of technical composite materials, such as fibre-reinforced polymers (FRP). The original shear-lag theory proposed by Cox in 1952 is generalized for fibres with variable radius and with symmetric and asymmetric ends. Analytical solutions are derived for the distribution of axial and interfacial shear stress in cylindrical and elliptical fibres, as well as conical and paraboloidal fibres with asymmetric ends. Additionally, the distribution of axial and interfacial shear stress for conical and paraboloidal fibres with symmetric ends are numerically predicted. The results are compared with solutions from axisymmetric finite element models. A parameter study is performed, to investigate the suitability of alternative fibre geometries for use in FRP.
KW  - Natural fibres
KW  - Polymer-matrix composites
KW  - Biocomposites
KW  - Stress concentrations
KW  - Finite element analysis
Y1  - 2022
U6  - http://dx.doi.org/10.1016/j.ijsolstr.2022.111464
SN  - 0020-7683
VL  - 239–240
IS  - Art. No. 111464
PB  - Elsevier
CY  - New York, NY
ER  - 
TY  - JOUR
A1  - Uysal, Karya
A1  - Firat, Ipek Serat
A1  - Creutz, Till
A1  - Aydin, Inci Cansu
A1  - Artmann, Gerhard
A1  - Teusch, Nicole
A1  - Temiz Artmann, Aysegül
T1  - A novel in vitro wound healing assay using free-standing, ultra-thin PDMS membranes
JF  - membranes
N2  - Advances in polymer science have significantly increased polymer applications in life sciences. We report the use of free-standing, ultra-thin polydimethylsiloxane (PDMS) membranes, called CellDrum, as cell culture substrates for an in vitro wound model. Dermal fibroblast monolayers from 28- and 88-year-old donors were cultured on CellDrums. By using stainless steel balls, circular cell-free areas were created in the cell layer (wounding). Sinusoidal strain of 1 Hz, 5% strain, was applied to membranes for 30 min in 4 sessions. The gap circumference and closure rate of un-stretched samples (controls) and stretched samples were monitored over 4 days to investigate the effects of donor age and mechanical strain on wound closure. A significant decrease in gap circumference and an increase in gap closure rate were observed in trained samples from younger donors and control samples from older donors. In contrast, a significant decrease in gap closure rate and an increase in wound circumference were observed in the trained samples from older donors. Through these results, we propose the model of a cell monolayer on stretchable CellDrums as a practical tool for wound healing research. The combination of biomechanical cell loading in conjunction with analyses such as gene/protein expression seems promising beyond the scope published here.
Y1  - 2022
U6  - http://dx.doi.org/10.3390/membranes13010022
N1  - This article belongs to the Special Issue "Latest Scientific Discoveries in Polymer Membranes"
VL  - 2023
IS  - 13(1)
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Zhantlessova, Sirina
A1  - Savitskaya, Irina
A1  - Kistaubayeva, Aida
A1  - Ignatova, Ludmila
A1  - Talipova, Aizhan
A1  - Pogrebnjak, Alexander
A1  - Digel, Ilya
T1  - Advanced “Green” prebiotic composite of bacterial cellulose/pullulan based on synthetic biology-powered microbial coculture strategy
JF  - Polymers
N2  - Bacterial cellulose (BC) is a biopolymer produced by different microorganisms, but in biotechnological practice, Komagataeibacter xylinus is used. The micro- and nanofibrillar structure of BC, which forms many different-sized pores, creates prerequisites for the introduction of other polymers into it, including those synthesized by other microorganisms. The study aims to develop a cocultivation system of BC and prebiotic producers to obtain BC-based composite material with prebiotic activity. In this study, pullulan (PUL) was found to stimulate the growth of the probiotic strain Lactobacillus rhamnosus GG better than the other microbial polysaccharides gellan and xanthan. BC/PUL biocomposite with prebiotic properties was obtained by cocultivation of Komagataeibacter xylinus and Aureobasidium pullulans, BC and PUL producers respectively, on molasses medium. The inclusion of PUL in BC is proved gravimetrically by scanning electron microscopy and by Fourier transformed infrared spectroscopy. Cocultivation demonstrated a composite effect on the aggregation and binding of BC fibers, which led to a significant improvement in mechanical properties. The developed approach for “grafting” of prebiotic activity on BC allows preparation of environmentally friendly composites of better quality.
KW  - coculture
KW  - pullulan
KW  - exopolysaccharides
KW  - prebiotic
KW  - bacterial cellulose
Y1  - 2022
U6  - http://dx.doi.org/10.3390/polym14153224
SN  - 2073-4360
N1  - This article belongs to the Special Issue "Cellulose Based Composites"
VL  - 14
IS  - 15
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Mandekar, Swati
A1  - Holland, Abigail
A1  - Thielen, Moritz
A1  - Behbahani, Mehdi
A1  - Melnykowycz, Mark
T1  - Advancing towards Ubiquitous EEG, Correlation of In-Ear EEG with Forehead EEG
JF  - Sensors
N2  - Wearable EEG has gained popularity in recent years driven by promising uses outside of clinics and research. The ubiquitous application of continuous EEG requires unobtrusive form-factors that are easily acceptable by the end-users. In this progression, wearable EEG systems have been moving from full scalp to forehead and recently to the ear. The aim of this study is to demonstrate that emerging ear-EEG provides similar impedance and signal properties as established forehead EEG. EEG data using eyes-open and closed alpha paradigm were acquired from ten healthy subjects using generic earpieces fitted with three custom-made electrodes and a forehead electrode (at Fpx) after impedance analysis. Inter-subject variability in in-ear electrode impedance ranged from 20 kΩ to 25 kΩ at 10 Hz. Signal quality was comparable with an SNR of 6 for in-ear and 8 for forehead electrodes. Alpha attenuation was significant during the eyes-open condition in all in-ear electrodes, and it followed the structure of power spectral density plots of forehead electrodes, with the Pearson correlation coefficient of 0.92 between in-ear locations ELE (Left Ear Superior) and ERE (Right Ear Superior) and forehead locations, Fp1 and Fp2, respectively. The results indicate that in-ear EEG is an unobtrusive alternative in terms of impedance, signal properties and information content to established forehead EEG.
KW  - in-ear EEG
KW  - correlation
KW  - forehead EEG
KW  - impedance spectroscopy
KW  - biopotential electrodes
Y1  - 2022
U6  - http://dx.doi.org/10.3390/s22041568
SN  - 1424-8220
VL  - 22
IS  - 4
SP  - 1
EP  - 19
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Stäudle, Benjamin
A1  - Seynnes, Olivier
A1  - Laps, Guido
A1  - Brüggemann, Gert-Peter
A1  - Albracht, Kirsten
T1  - Altered gastrocnemius contractile behavior in former achilles tendon rupture patients during walking
JF  - Frontiers in Physiology
N2  - Achilles tendon rupture (ATR) remains associated with functional limitations years after injury. Architectural remodeling of the gastrocnemius medialis (GM) muscle is typically observed in the affected leg and may compensate force deficits caused by a longer tendon. Yet patients seem to retain functional limitations during—low-force—walking gait. To explore the potential limits imposed by the remodeled GM muscle-tendon unit (MTU) on walking gait, we examined the contractile behavior of muscle fascicles during the stance phase. In a cross-sectional design, we studied nine former patients (males; age: 45 ± 9 years; height: 180 ± 7 cm; weight: 83 ± 6 kg) with a history of complete unilateral ATR, approximately 4 years post-surgery. Using ultrasonography, GM tendon morphology, muscle architecture at rest, and fascicular behavior were assessed during walking at 1.5 m⋅s–1 on a treadmill. Walking patterns were recorded with a motion capture system. The unaffected leg served as control. Lower limbs kinematics were largely similar between legs during walking. Typical features of ATR-related MTU remodeling were observed during the stance sub-phases corresponding to series elastic element (SEE) lengthening (energy storage) and SEE shortening (energy release), with shorter GM fascicles (36 and 36%, respectively) and greater pennation angles (8° and 12°, respectively). However, relative to the optimal fascicle length for force production, fascicles operated at comparable length in both legs. Similarly, when expressed relative to optimal fascicle length, fascicle contraction velocity was not different between sides, except at the time-point of peak series elastic element (SEE) length, where it was 39 ± 49% lower in the affected leg. Concomitantly, fascicles rotation during contraction was greater in the affected leg during the whole stance-phase, and architectural gear ratios (AGR) was larger during SEE lengthening. Under the present testing conditions, former ATR patients had recovered a relatively symmetrical walking gait pattern. Differences in seen AGR seem to accommodate the profound changes in MTU architecture, limiting the required fascicle shortening velocity. Overall, the contractile behavior of the GM fascicles does not restrict length- or velocity-dependent force potentials during this locomotor task.
KW  - tendon rupture
KW  - muscle fascicle behavior
KW  - walking gait
KW  - force generation
KW  - ultrasound imaging
Y1  - 2022
U6  - http://dx.doi.org/10.3389/fphys.2022.792576
SN  - 1664-042X
VL  - 13
PB  - Frontiers Research Foundation
CY  - Lausanne
ER  - 
TY  - JOUR
A1  - Kotliar, Konstantin
A1  - Ortner, Marion
A1  - Conradi, Anna
A1  - Hacker, Patricia
A1  - Hauser, Christine
A1  - Günthner, Roman
A1  - Moser, Michaela
A1  - Muggenthaler, Claudia
A1  - Diehl-Schmid, Janine
A1  - Priller, Josef
A1  - Schmaderer, Christoph
A1  - Grimmer, Timo
T1  - Altered retinal cerebral vessel oscillation frequencies in Alzheimer's disease compatible with impaired amyloid clearance
JF  - Neurobiology of Aging
N2  - Retinal vessels are similar to cerebral vessels in their structure and function. Moderately low oscillation frequencies of around 0.1 Hz have been reported as the driving force for paravascular drainage in gray matter in mice and are known as the frequencies of lymphatic vessels in humans. We aimed to elucidate whether retinal vessel oscillations are altered in Alzheimer's disease (AD) at the stage of dementia or mild cognitive impairment (MCI). Seventeen patients with mild-to-moderate dementia due to AD (ADD); 23 patients with MCI due to AD, and 18 cognitively healthy controls (HC) were examined using Dynamic Retinal Vessel Analyzer. Oscillatory temporal changes of retinal vessel diameters were evaluated using mathematical signal analysis. Especially at moderately low frequencies around 0.1 Hz, arterial oscillations in ADD and MCI significantly prevailed over HC oscillations and correlated with disease severity. The pronounced retinal arterial vasomotion at moderately low frequencies in the ADD and MCI groups would be compatible with the view of a compensatory upregulation of paravascular drainage in AD and strengthen the amyloid clearance hypothesis.
KW  - Alzheimer's disease
KW  - Retinal vessel analysis
KW  - Vasomotions
KW  - Pulsations
KW  - Mild cognitive impairment
Y1  - 2022
U6  - http://dx.doi.org/10.1016/j.neurobiolaging.2022.08.012
SN  - 0197-4580
VL  - 120
SP  - 117
EP  - 127
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Colombo, Daniele
A1  - Drira, Slah
A1  - Frotscher, Ralf
A1  - Staat, Manfred
T1  - An element-based formulation for ES-FEM and FS-FEM models for implementation in standard solid mechanics finite element codes for 2D and 3D static analysis
JF  - International Journal for Numerical Methods in Engineering
N2  - Edge-based and face-based smoothed finite element methods (ES-FEM and FS-FEM, respectively) are modified versions of the finite element method allowing to achieve more accurate results and to reduce sensitivity to mesh distortion, at least for linear elements. These properties make the two methods very attractive. However, their implementation in a standard finite element code is nontrivial because it requires heavy and extensive modifications to the code architecture. In this article, we present an element-based formulation of ES-FEM and FS-FEM methods allowing to implement the two methods in a standard finite element code with no modifications to its architecture. Moreover, the element-based formulation permits to easily manage any type of element, especially in 3D models where, to the best of the authors' knowledge, only tetrahedral elements are used in FS-FEM applications found in the literature. Shape functions for non-simplex 3D elements are proposed in order to apply FS-FEM to any standard finite element.
KW  - distorted element
KW  - ES-FEM
KW  - FS-FEM
KW  - non-simplex S-FEM elements
KW  - S-FEM
Y1  - 2022
U6  - http://dx.doi.org/10.1002/nme.7126
SN  - 1097-0207
VL  - 124
IS  - 2
SP  - 402
EP  - 433
PB  - Wiley
CY  - Chichester
ER  - 
TY  - JOUR
A1  - Uysal, Karya
A1  - Creutz, Till
A1  - Firat, Ipek Seda
A1  - Artmann, Gerhard
A1  - Teusch, Nicole
A1  - Temiz Artmann, Aysegül
T1  - Bio-functionalized ultra-thin, large-area and waterproof silicone membranes for biomechanical cellular loading and compliance experiments
JF  - Polymers
N2  - Biocompatibility, flexibility and durability make polydimethylsiloxane (PDMS) membranes top candidates in biomedical applications. CellDrum technology uses large area, <10 µm thin membranes as mechanical stress sensors of thin cell layers. For this to be successful, the properties (thickness, temperature, dust, wrinkles, etc.) must be precisely controlled. The following parameters of membrane fabrication by means of the Floating-on-Water (FoW) method were investigated: (1) PDMS volume, (2) ambient temperature, (3) membrane deflection and (4) membrane mechanical compliance. Significant differences were found between all PDMS volumes and thicknesses tested (p < 0.01). They also differed from the calculated values. At room temperatures between 22 and 26 °C, significant differences in average thickness values were found, as well as a continuous decrease in thicknesses within a 4 °C temperature elevation. No correlation was found between the membrane thickness groups (between 3–4 µm) in terms of deflection and compliance. We successfully present a fabrication method for thin bio-functionalized membranes in conjunction with a four-step quality management system. The results highlight the importance of tight regulation of production parameters through quality control. The use of membranes described here could also become the basis for material testing on thin, viscous layers such as polymers, dyes and adhesives, which goes far beyond biological applications.
Y1  - 2022
SN  - 2073-4360
VL  - 14
IS  - 11
SP  - 2213
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Quittmann, Oliver J.
A1  - Abel, Thomas
A1  - Albracht, Kirsten
A1  - Strüder, Heiko K.
T1  - Biomechanics of all-out handcycling exercise: kinetics, kinematics and muscular activity of a 15-s sprint test in able-bodied participants
JF  - Sports Biomechanics
N2  - This study aims to quantify the kinematics, kinetics and muscular activity of all-out handcycling exercise and examine their alterations during the course of a 15-s sprint test. Twelve able-bodied competitive triathletes performed a 15-s all-out sprint test in a recumbent racing handcycle that was attached to an ergometer. During the sprint test, tangential crank kinetics, 3D joint kinematics and muscular activity of 10 muscles of the upper extremity and trunk were examined using a power metre, motion capturing and surface electromyography (sEMG), respectively. Parameters were compared between revolution one (R1), revolution two (R2), the average of revolution 3 to 13 (R3) and the average of the remaining revolutions (R4). Shoulder abduction and internal-rotation increased, whereas maximal shoulder retroversion decreased during the sprint. Except for the wrist angles, angular velocity increased for every joint of the upper extremity. Several muscles demonstrated an increase in muscular activation, an earlier onset of muscular activation in crank cycle and an increased range of activation. During the course of a 15-s all-out sprint test in handcycling, the shoulder muscles and the muscles associated to the push phase demonstrate indications for short-duration fatigue. These findings are helpful to prevent injuries and improve performance in all-out handcycling.
KW  - Handbike
KW  - sEMG
KW  - Paralympic sport
KW  - performance testing
KW  - high-intensity exercise
Y1  - 2022
U6  - http://dx.doi.org/10.1080/14763141.2020.1745266
SN  - 1752-6116 (Onlineausgabe)
SN  - 1476-3141 (Druckausgabe)
VL  - 21
IS  - 10
SP  - 1200
EP  - 1223
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - JOUR
A1  - Akimbekov, Nuraly S.
A1  - Digel, Ilya
A1  - Tastambek, Kuanysh T.
A1  - Marat, Adel K.
A1  - Turaliyeva, Moldir A.
A1  - Kaiyrmanova, Gulzhan K.
T1  - Biotechnology of Microorganisms from Coal Environments: From Environmental Remediation to Energy Production
JF  - Biology
N2  - It was generally believed that coal sources are not favorable as live-in habitats for microorganisms due to their recalcitrant chemical nature and negligible decomposition. However, accumulating evidence has revealed the presence of diverse microbial groups in coal environments and their significant metabolic role in coal biogeochemical dynamics and ecosystem functioning. The high oxygen content, organic fractions, and lignin-like structures of lower-rank coals may provide effective means for microbial attack, still representing a greatly unexplored frontier in microbiology. Coal degradation/conversion technology by native bacterial and fungal species has great potential in agricultural development, chemical industry production, and environmental rehabilitation. Furthermore, native microalgal species can offer a sustainable energy source and an excellent bioremediation strategy applicable to coal spill/seam waters. Additionally, the measures of the fate of the microbial community would serve as an indicator of restoration progress on post-coal-mining sites. This review puts forward a comprehensive vision of coal biodegradation and bioprocessing by microorganisms native to coal environments for determining their biotechnological potential and possible applications.
Y1  - 2022
U6  - http://dx.doi.org/10.3390/biology11091306
SN  - 2079-7737
N1  - This article belongs to the Special Issue "Microbial Ecology and Evolution in Extreme Environments"
VL  - 11
IS  - 9
PB  - MDPI
CY  - Basel
ER  -