TY - JOUR A1 - Rausch, Valentin A1 - Kahmann, Stephanie Lucina A1 - Baltschun, Christoph A1 - Staat, Manfred A1 - Müller, Lars P. A1 - Wegmann, Kilian T1 - Pressure distribution to the distal biceps tendon at the radial tuberosity: a biomechanical study JF - The Journal of Hand Surgery N2 - Purpose Mechanical impingement at the narrow radioulnar space of the tuberosity is believed to be an etiological factor in the injury of the distal biceps tendon. The aim of the study was to compare the pressure distribution at the proximal radioulnar space between 2 fixation techniques and the intact state. Methods Six right arms and 6 left arms from 5 female and 6 male frozen specimens were used for this study. A pressure transducer was introduced at the height of the radial tuberosity with the intact distal biceps tendon and after 2 fixation methods: the suture-anchor and the cortical button technique. The force (N), maximum pressure (kPa) applied to the radial tuberosity, and the contact area (mm²) of the radial tuberosity with the ulna were measured and differences from the intact tendon were detected from 60° supination to 60° pronation in 15° increments with the elbow in full extension and in 45° and 90° flexion of the elbow. Results With the distal biceps tendon intact, the pressures during pronation were similar regardless of extension and flexion and were the highest at 60° pronation with 90° elbow flexion (23.3 ± 53.5 kPa). After repair of the tendon, the mean peak pressure, contact area, and total force showed an increase regardless of the fixation technique. Highest peak pressures were found using the cortical button technique at 45° flexion of the elbow and 60° pronation. These differences were significantly different from the intact tendon. The contact area was significantly larger in full extension and 15°, 30°, and 60° pronation using the cortical button technique. Conclusions Pressures on the distal biceps tendon at the radial tuberosity increase during pronation, especially after repair of the tendon. Clinical relevance Mechanical impingement could play a role in both the etiology of primary distal biceps tendon ruptures and the complications occurring after fixation of the tendon using certain techniques. Y1 - 2020 U6 - https://doi.org/10.1016/j.jhsa.2020.01.006 SN - 0363-5023 VL - 45 IS - 8 SP - 776.e1 EP - 776.e9 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Digel, Ilya T1 - Primary thermosensory events in cells JF - Transient receptor potential channels / Md. Shahidul Islam, ed. Y1 - 2011 SN - 978-94-007-0264-6 N1 - (Advances in experimental medicine and biology ; 704) SP - 451 EP - 468 PB - Springer CY - Dordrecht [u.a.] ER - TY - JOUR A1 - Breitbach, Gerd A1 - Jahn, W. A1 - Rehm, W. T1 - Primärkreislauf - Thermodynamik und Komponentenbelastung JF - Sicherheitstechnische Untersuchungen zum Störfallverhalten des HTR-Modul / [KFA, Kernforschungsanlage Jülich, GmbH, Inst. für Nukleare Sicherheitsforschung] / zsgest. von J. Mertens Y1 - 1985 N1 - (Spezielle Berichte der Kernforschungsanlage Jülich ; 335). - Ergänzungsband mit vertiefenden Einzelbeiträgen zu 'Spezielle Berichte der Kernforschungsanlage Jülich' Bd. 260. - Institut für Nukleare Sicherheitsforschung SP - 61 EP - 98 PB - Zentralbibliothek der Kernforschungsanlage CY - Jülich ER - TY - JOUR A1 - Matcha, Heike A1 - Ljubas, Ante A1 - Gueldemet, Harun ED - Kepczynska-Walczak, A. T1 - Printing a Coffee Bar: An investigation into mid-scale 3D printing JF - Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018 N2 - We present and discuss an exploration of the possibilities and properties of 3D printing with a printing space of 1 cubic meter, and how those can be integrated into architectural education through an experimental design and research course with students of architecture.We expand on issues presented at the eCAADe conference 2017 in Rome [Ref 6] by increasing the complexity and size of our prints, printing not a model to scale, but a full scale funtional prototype of a usable architectural object: A coffee bar. Y1 - 2018 SP - 59 EP - 68 ER - TY - JOUR A1 - Brüssermann, Klaus A1 - Deuster, M. T1 - Prinzip und Anwendung der akustischen Gastemperaturmeßtechnik / Deuster, M. ; Brüssermann, Klaus JF - VGB-Kolloquium "Industrie- und Heizkraftwerke 1994" : 18./19. Mai 1994, Essen / VGB Technische Verenigung der Großkraftwerksbetreiber e.V. Y1 - 1994 N1 - Kolloquium Industrie- und Heizkraftwerke <1994, Essen> ; Technische Vereinigung der Grosskraftwerksbetreiber SP - 1 EP - 19 CY - Essen ER - TY - JOUR A1 - Grundmann, Reinhard A1 - Kramer, C. A1 - Hilge, B. T1 - Prinzipien und Entwurf von Anlagen zur Wärmebehandlung von Halbzeugen Y1 - 1986 N1 - Konferenz-Einzelbericht : Walzen von Flachprodukten, Vortragstexte eines Symp. der Dt. Ges. f. Metallkunde (DGM) SP - 129 EP - 146 ER - TY - JOUR A1 - Thoma, Andreas A1 - Thomessen, Karolin A1 - Gardi, Alessandro A1 - Fisher, A. A1 - Braun, Carsten T1 - Prioritising paths: An improved cost function for local path planning for UAV in medical applications JF - The Aeronautical Journal N2 - Even the shortest flight through unknown, cluttered environments requires reliable local path planning algorithms to avoid unforeseen obstacles. The algorithm must evaluate alternative flight paths and identify the best path if an obstacle blocks its way. Commonly, weighted sums are used here. This work shows that weighted Chebyshev distances and factorial achievement scalarising functions are suitable alternatives to weighted sums if combined with the 3DVFH* local path planning algorithm. Both methods considerably reduce the failure probability of simulated flights in various environments. The standard 3DVFH* uses a weighted sum and has a failure probability of 50% in the test environments. A factorial achievement scalarising function, which minimises the worst combination of two out of four objective functions, reaches a failure probability of 26%; A weighted Chebyshev distance, which optimises the worst objective, has a failure probability of 30%. These results show promise for further enhancements and to support broader applicability. KW - Path planning KW - Cost function KW - Multi-objective optimization Y1 - 2023 U6 - https://doi.org/10.1017/aer.2023.68 SN - 0001-9240 (Print) SN - 2059-6464 (Online) IS - First View SP - 1 EP - 18 PB - Cambridge University Press CY - Cambridge ER - TY - JOUR A1 - Kotter, Michael A1 - Riekert, Lothar A1 - Simoncic, V. T1 - Pristup sintezi industrijskih katalizatora JF - Kemija u industriji : casopis kemicara i tehnologa Jugoslavije. 35 (1986) Y1 - 1986 SN - 0022-9830 N1 - Hrsg.: Croatian Society of Chemical Engineers SP - 79 EP - 86 ER - TY - JOUR A1 - Glaser, Markus A1 - Schmitz, Philipp T1 - Privatanleger am Optionsscheinmarkt JF - Zeitschrift für Bankrecht und Bankwirtschaft : ZBB Y1 - 2007 SN - 0936-2800 N1 - Printausg. in der Bibliothek Eupener Str. vorhanden VL - Jg. 19 IS - H. 3 SP - 214 EP - 230 ER - TY - JOUR A1 - Glaser, Markus A1 - Schmitz, Philipp T1 - Privatanleger am Optionsscheinmarkt Y1 - 2006 SP - 1 EP - 46 ER -