TY  - CHAP
A1  - Feldmann, M.
A1  - Döring, Bernd
A1  - Pyschny, D.
T1  - Floor systems; Sustainabilty analyses and assessments of steel bridges
T2  - Sustainable steel buildings : a practical guide for structures and envelopes
Y1  - 2016
SN  - 978-1-118-74079-8 (PDF)
SN  - 978-1-118-74111-5
SP  - 198
EP  - 223
PB  - Wiley Blackwell
CY  - Chichester, West Sussex
ER  - 
TY  - JOUR
A1  - Schwab, Lukas
A1  - Hojdis, Nils
A1  - Lacayo, Jorge
A1  - Wilhelm, Manfred
T1  - Fourier-Transform Rheology of Unvulcanized, Carbon Black Filled Styrene Butadiene Rubber
JF  - Macromolecular Materials and Engineering
N2  - Rubber materials filled with reinforcing fillers display nonlinear rheological behavior at small strain amplitudes below γ0 < 0.1. Nevertheless, rheological data are analyzed mostly in terms of linear parameters, such as shear moduli (G′, G″), which loose their physical meaning in the nonlinear regime. In this work styrene butadiene rubber filled with carbon black (CB) under large amplitude oscillatory shear (LAOS) is analyzed in terms of the nonlinear parameter I3/1. Three different CB grades are used and the filler load is varied between 0 and 70 phr. It is found that I3/1(φ) is most sensitive to changes of the total accessible filler surface area at low strain amplitudes (γ0 = 0.32). The addition of up to 70 phr CB leads to an increase of I3/1(φ) by a factor of more than ten. The influence of the measurement temperature on I3/1 is pronounced for CB levels above the percolation threshold.
Y1  - 2016
U6  - https://doi.org/10.1002/mame.201500356
SN  - 1439-2054
VL  - 301
IS  - 4
SP  - 457
EP  - 468
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - GEN
A1  - Möhring, S.
A1  - Wulfhorst, H.
A1  - Capitain, C.
A1  - Roth, J.
A1  - Tippkötter, Nils
T1  - Fractioning of lignocellulosic biomass: Scale-down and automation of thermal pretreatment for parameter optimization
T2  - Chemie Ingenieur Technik
N2  - In order to efficiently convert lignocellulose, it is often necessary to conduct a pretreatment. The biomass considered in this study typically comprises of agricultural and horticultural residues, as well as beechwood. A very environmentally friendly method, namely, fungal pretreatment using white-rot fungi, leads to an enhanced enzymatic hydrolysis. In contrast to other processes presented, the energy input is extremely low. However, the fungal growth on the lignocellulosic substrates takes several weeks at least in order to be effective. Thus, the reduction of chemicals and energy for thermal processing is a target of our current research. Liquid hot water (LHW) and solvent-based pretreatment (OrganoSolv) require more complex equipment, as they depend on high temperatures (160 – 180 °C) and enhanced pressure (up to 20 bar). However, they prove to be promising processes in regard to the fractioning of lignocellulose. For optimal lignin recovery the parameters differ from those established in cellulose extraction. A novel screening system scaled down to a reaction volume of 100 mL has been developed and successfully tested for this purpose.
Y1  - 2016
U6  - https://doi.org/10.1002/cite.201650288
SN  - 0009-286X
SN  - 1522-2640 (eISSN)
N1  - ProcessNet-Jahrestagung und 32. DECHEMA-Jahrestagung der Biotechnologen 2016, 12. - 15. September 2016, Eurogress Aachen
VL  - 88
IS  - 9
SP  - 1229
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Matcha, Heike
ED  - Herneoja, Aulikki
ED  - Österlund, Toni
ED  - Markkanen, Piia
T1  - From Designing Buildings from Systems to Designing Systems for Buildings
T2  - Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1
N2  - We study the novel possibilities computer aided design and production open up for the design of building systems. Such systems today can, via individualized mass production, consist of a larger number and more complex parts than previously and therefore be assembled into more complex wholes. This opens up the possibility of designing specialized systems specifically for single buildings. The common order of starting with a building system and designing a building using this system can be reversed to designing a building first and then developing a system specifically for that building. We present and discuss research that incorporates students design projects into research work and fosters links between research and teaching.
KW  - Building Systems
KW  - Parametric Design
KW  - Parametric Modelling
KW  - Structuralist Architecture
Y1  - 2016
U6  - https://doi.org/10.52842/conf.ecaade.2016.1.237
N1  - Proceedings of the 34th eCAADe Conference, University of Oulu, Oulu, Finland, 22-26 August 2016.
SP  - 237
EP  - 240
PB  - ECAADe
CY  - Oulu, Finland
ER  - 
TY  - GEN
A1  - Gamgami, Farid
A1  - Czupalla, Markus
A1  - Garcia, Antonio
A1  - Agnolon, David
T1  - From planetary transits to spacecraft design: achieving PLATO’s pointing performance
T2  - A7. Symposium on technological Requirement for future space astronomy and solar-system science missions
N2  - In the last decades, several hundred exoplanets could be detected thanks to space-based observatories, namely CNES’ COROT and NASA’s Kepler. To expand this quest ESA plans to launch CHEOPS as the f irst small class mission in the cosmic visions program (S1) and PLATO as the 3rd medium class mission, so called M3 . PLATO’s primary objective is the detection of Earth like Exoplanets orbiting solar type stars in the habitable zone and characterisation of their bulk properties. This is possible by precise lightcurve measurement via 34 cameras. That said it becomes obvious that accurate pointing is key to achieve the required signal to noise ratio for positive transit detection. The paper will start with a comprehensive overview of PLATO’s mission objectives and mission architecture. Hereafter, special focus will be devoted to PLATO’s pointing requirements. Understanding the very nature of PLATO’s pointing requirements is essential to derive a design baseline to achieve the required performance. The PLATO frequency domain is of particular interest, ranging from 40 mHz to 3 Hz. Due to the very different time-scales involved, the spectral pointing requirement is decomposed into a high frequency part dominated by the attitude control system and the low frequency part dominated by the thermo-elastic properties of the spacecraft’s configuration. Both pose stringent constraints on the overall design as well as technology properties to comply with the derived requirements and thus assure a successful mission.
Y1  - 2016
N1  - 67th International Astronautical Congress, 26. - 30. September 2016, Guadalajara, Mexico
ER  - 
TY  - JOUR
A1  - Dallas, Shannon
A1  - Salphati, Laurent
A1  - Gomez-Zepeda, David
A1  - Wanek, Thomas
A1  - Chen, Liangfu
A1  - Chu, Xiaoyan
A1  - Kunta, Jeevan
A1  - Mezler, Mario
A1  - Menet, Marie-Claude
A1  - Chasseigneaux, Stephanie
A1  - Declèves, Xavier
A1  - Langer, Oliver
A1  - Pierre, Esaie
A1  - DiLoreto, Karen
A1  - Hoft, Carolin
A1  - Laplanche, Loic
A1  - Pang, Jodie
A1  - Pereira, Tony
A1  - Andonian, Clara
A1  - Simic, Damir
A1  - Rode, Anja
A1  - Yabut, Jocelyn
A1  - Zhang, Xiaolin
A1  - Scheer, Nico
T1  - Generation and Characterization of a Breast Cancer Resistance Protein Humanized Mouse Model
JF  - Molecular Pharmacology
N2  - Breast cancer resistance protein (BCRP) is expressed in various tissues, such as the gut, liver, kidney and blood brain barrier (BBB), where it mediates the unidirectional transport of substrates to the apical/luminal side of polarized cells. Thereby BCRP acts as an efflux pump, mediating the elimination or restricting the entry of endogenous compounds or xenobiotics into tissues and it plays important roles in drug disposition, efficacy and safety. Bcrp knockout mice (Bcrp−/−) have been used widely to study the role of this transporter in limiting intestinal absorption and brain penetration of substrate compounds. Here we describe the first generation and characterization of a mouse line humanized for BCRP (hBCRP), in which the mouse coding sequence from the start to stop codon was replaced with the corresponding human genomic region, such that the human transporter is expressed under control of the murine Bcrp promoter. We demonstrate robust human and loss of mouse BCRP/Bcrp mRNA and protein expression in the hBCRP mice and the absence of major compensatory changes in the expression of other genes involved in drug metabolism and disposition. Pharmacokinetic and brain distribution studies with several BCRP probe substrates confirmed the functional activity of the human transporter in these mice. Furthermore, we provide practical examples for the use of hBCRP mice to study drug-drug interactions (DDIs). The hBCRP mouse is a promising model to study the in vivo role of human BCRP in limiting absorption and BBB penetration of substrate compounds and to investigate clinically relevant DDIs involving BCRP.
Y1  - 2016
U6  - https://doi.org/10.1124/mol.115.102079
SN  - 1521-0111
VL  - 89
IS  - 5
SP  - 492
EP  - 504
PB  - ASPET
CY  - Bethesda, Md.
ER  - 
TY  - CHAP
A1  - Hallmann, Marcus
A1  - Heidecker, Ansgar
A1  - Schlotterer, Markus
A1  - Dachwald, Bernd
T1  - GTOC8: results and methods of team 15 DLR
T2  - 26th AAS/AIAA Space Flight Mechanics Meeting, Napa, CA
N2  - This paper describes the results and methods used during the 8th Global Trajectory Optimization Competition (GTOC) of the DLR team. Trajectory optimization is crucial for most of the space missions and usually can be formulated as a global optimization problem. A lot of research has been done to different type of mission problems. The most demanding ones are low thrust transfers with e.g. gravity assist sequences. In that case the optimal control problem is combined with an integer problem. In most of the GTOCs we apply a filtering of the problem based on domain knowledge.
Y1  - 2016
N1  - 26th AAS/AIAA Space Flight Mechanics Meeting, February 14-18, 2016, Napa, California, U.S.A. Napa, CA
ER  - 
TY  - JOUR
A1  - Murib, M. S.
A1  - Yeap, W. S.
A1  - Eurlings, Y.
A1  - Grinsven, B. van
A1  - Boyen, H.-G.
A1  - Conings, B.
A1  - Michiels, L.
A1  - Ameloot, M.
A1  - Carleer, R.
A1  - Warmer, J.
A1  - Kaul, P.
A1  - Haenen, K.
A1  - Schöning, Michael Josef
A1  - Ceuninck, W. de
A1  - Wagner, P.
T1  - Heat-transfer based characterization of DNA on synthetic sapphire chips
JF  - Sensors and Actuators B: Chemical
N2  - In this study, we show that synthetic sapphire (Al₂O₃), an established implant material, can also serve as a platform material for biosensors comparable to nanocrystalline diamond. Sapphire chips, beads, and powder were first modified with (3-aminopropyl) triethoxysilane (APTES), followed by succinic anhydride (SA), and finally single-stranded probe DNA was EDC coupled to the functionalized layer. The presence of the APTES-SA layer on sapphire powders was confirmed by thermogravimetric analyis and Fourier-transform infrared spectroscopy. Using planar sapphire chips as substrates and X-ray photoelectron spectroscopy (XPS) as surface-sensitive tool, the sequence of individual layers was analyzed with respect to their chemical state, enabling the quantification of areal densities of the involved molecular units. Fluorescence microscopy was used to demonstrate the hybridization of fluorescently tagged target DNA to the probe DNA, including denaturation- and re-hybridization experiments. Due to its high thermal conductivity, synthetic sapphire is especially suitable as a chip material for the heat-transfer method, which was employed to distinguish complementary- and non-complementary DNA duplexes containing single-nucleotide polymorphisms. These results indicate that it is possible to detect mutations electronically with a chemically resilient and electrically insulating chip material.
Y1  - 2016
U6  - https://doi.org/10.1016/j.snb.2016.02.027
SN  - 0925-4005
VL  - 230
IS  - 230
SP  - 260
EP  - 271
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Breuer, Lars
A1  - Raue, Markus
A1  - Strobel, M.
A1  - Mang, Thomas
A1  - Schöning, Michael Josef
A1  - Thoelen, R.
A1  - Wagner, Torsten
T1  - Hydrogels with incorporated graphene oxide as light-addressable actuator materials for cell culture environments in lab-on-chip systems
JF  - Physica status solidi (a)
N2  - Abstractauthoren Graphene oxide (GO) nanoparticles were incorporated in temperature-sensitive Poly(N-isopropylacrylamide) (PNIPAAm) hydrogels. The nanoparticles increase the light absorption and convert light energy into heat efficiently. Thus, the hydrogels with GO can be stimulated spatially resolved by illumination as it was demonstrated by IR thermography. The temporal progression of the temperature maximum was detected for different concentrations of GO within the polymer network. Furthermore, the compatibility of PNIPAAm hydrogels with GO and cell cultures was investigated. For this purpose, culture medium was incubated with hydrogels containing GO and the viability and morphology of chinese hamster ovary (CHO) cells was examined after several days of culturing in presence of this medium.
Y1  - 2016
U6  - https://doi.org/10.1002/pssa.201533056
SN  - 1862-6300
VL  - 213
IS  - 6
SP  - 1520
EP  - 1525
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Bung, Daniel Bernhard
A1  - Valero, Daniel
ED  - Dewals, Benjamin
T1  - Image processing techniques for velocity estimation in highly aerated flows: bubble image velocimetry vs. optical flow
T2  - Sustainable Hydraulics in the Era of Global Change : Proceedings of the 4th IAHR Europe Congress (Liege, Belgium, 27-29 July 2016)
Y1  - 2016
SN  - 978-1-138-02977-4
SN  - 978-1-4987-8149-7 (eBook)
U6  - https://doi.org/10.1201/b21902-31
SP  - 151
EP  - 157
PB  - CRC Press
ER  -