TY  - JOUR
A1  - Kirchner, Patrick
A1  - Spelthahn, Heiko
A1  - Schöning, Michael Josef
A1  - Henkel, Hartmut
A1  - Schneider, Andreas
A1  - Friedrich, Peter
A1  - Kolstad, Jens
A1  - Berger, Jörg
T1  - Realisierung eines Polyimid-basierten kalorimetrischen Gassensors zur Inline-Überwachung der H2O2-Konzentration in aseptischen Abfüllsystemen
JF  - Tagungsband: Sensoren und Messsysteme 2010
N2  - In aseptischen Abfüllsystemen wird Wasserstoffperoxid in der Gasphase aufgrund der stark oxidativen Wirkung zur Packstoffentkeimung eingesetzt. Dabei wird die Effizienz der Entkeimung im Wesentlichen von der vorliegenden H2O2-Konzentration im Packstoff bestimmt. Zur Inline-Überwachung der H2O2-Konzentration wurde ein kalorimetrischer Gassensor auf Basis einer flexiblen Polyimidfolie aus temperatursensitiven Dünnschicht-Widerständen und Mangan(IV)-oxid als katalytische Transducerschicht realisiert. Der Sensor weist ein lineares Ansprechverhalten mit einer Sensitivität von 7,15 °C/Vol.-% in einem H2O2-Konzentrationsbereich von 0 bis 8 Vol.-% auf. Weiterhin wurde zur Auslesung des Sensorsignals eine RFID-Elektronik, bestehend aus einem Sensor-Tag und einer Sende-/Empfangseinheit ausgelegt, sowie eine Abfolge des Messzyklus aufgestellt. Im weiteren Verlauf soll der kalorimetrische Gassensor mit der RFID-Elektronik gekoppelt und in eine Testverpackung zur Inline-Überwachung der H2O2-Konzentration in aseptischen Abfüllsystemen implementiert werden.
Y1  - 2010
SN  - 978-3-8007-3260-9
N1  - Sensoren und Messsysteme 2010 - 15. ITG/GMA-Fachtagung, 18.05.2010 - 19.05.2010 in Nürnberg
SP  - 607
EP  - 612
PB  - VDE Verlag
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Kirchner, Patrick
A1  - Oberländer, Jan
A1  - Friedrich, Peter
A1  - Rysstad, Gunnar
A1  - Berger, Jörg
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Realization of a calorimetric gas sensor on polyimide foil for applications in aseptic food industry
JF  - Procedia Engineering
N2  - A calorimetric gas sensor is presented for the monitoring of gas-phase H2O2 at elevated temperature during sterilization processes in aseptic food industry. The sensor consists of two temperature-sensitive thin-film resistances built up on a polyimide foil with a thickness of 25 μm, which are passivated with a layer of SU-8 photo resist and catalytically activated with manganese(IV) oxide. Instead of an active heating structure, the calorimetric sensor utilizes the elevated temperature of an evaporated H2O2 aerosol. In an experimental set-up, the sensor has shown a sensitivity of 4.78 °C/(%v/v) in a H2O2 concentration range of 0 to 10% v/v at an evaporation temperature of 240 ∘C. Furthermore, the sensor possesses the same, unchanged sensor signal even at varied evaporation temperatures of the gas stream. The sensor characterization demonstrates the suitability of the calorimetric gas sensor for monitoring the efficiency of sterilization processes.
Y1  - 2010
U6  - https://doi.org/10.1016/j.proeng.2010.09.098
SN  - 1877-7058
N1  - Eurosensor XXIV Conference, 5-8 September 2010, Linz, Austria
VL  - 5
SP  - 264
EP  - 267
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Turek, Monik
A1  - Heiden, Wolfgang
A1  - Guo, Sharon
A1  - Riesen, Alfred
A1  - Schubert, Jürgen
A1  - Zander, Willi
A1  - Krüger, Peter
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Simultaneous detection of cyanide and heavy metals for environmental analysis by means of µISEs
JF  - Physica Status Solidi (A)
N2  - In environmental analysis, cyanide and heavy metals play an important role, because these substances are highly toxic for biological systems. They can lead to chronic and acute diseases. Due to the chemical properties of cyanide it is frequently used for industrial processes such as extraction of silver and gold. Heavy metals can be found as trace elements in nature and are often applied in industries e.g., galvanization processes. Up to now, cyanide and heavy metals can be detected by several sensors separately and their detection is often limited to laboratory investigations. In this publication, with regard to an in situ analysis, a new miniaturized silicon-based sensor system for the simultaneous detection of cyanide and heavy metals in aqueous solutions is presented that is based on chalcogenide glass-based micro ion-selective electrodes (µISEs). The µISEs are incorporated into a specially designed measuring system for the simultaneous detection of heavy metals and cyanide in solutions and validated by simultaneous measurements of Cu2+- and CN−-ions, Cd2+- and CN−- ions and Pb2+- and CN−-ions. The particular sensor system has shown good sensor properties in the µ-molar ion-concentration range. For simultaneous measurements in complex heavy metal and cyanide solutions an intelligent software using fuzzy logic is discussed.
Y1  - 2010
U6  - https://doi.org/10.1002/pssa.200983303
SN  - 1862-6300
N1  - Special Issue: Engineering of Functional Interfaces EnFI 2009
VL  - 207
IS  - 4
SP  - 817
EP  - 823
PB  - Wiley-VCH
CY  - Berlin
ER  -