TY  - JOUR
A1  - Bohrn, U.
A1  - Stütz, E.
A1  - Fuchs, K.
A1  - Fleischer, M.
A1  - Schöning, Michael Josef
A1  - Wagner, P.
T1  - Monitoring of irritant gas using a whole-cell-based sensor system
JF  - Sensors and Actuators B: Chemical
N2  - Cell-based sensors for the detection of gases have long been underrepresented, due to the cellular requirement of being cultured in a liquid environment. In this work we established a cell-based gas biosensor for the detection of toxic substances in air, by adapting a commercial sensor chip (Bionas®), previously used for the measurement of pollutants in liquids. Cells of the respiratory tract (A549, RPMI 2650, V79), which survive at a gas phase in a natural context, are used as biological receptors. The physiological cell parameters acidification, respiration and morphology are continuously monitored in parallel. Ammonia was used as a highly water-soluble model gas to test the feasibility of the sensor system. Infrared measurements confirmed the sufficiency of the medium draining method. This sensor system provides a basis for many sensor applications such as environmental monitoring, building technology and public security.
Y1  - 2012
U6  - https://doi.org/10.1016/j.snb.2012.05.088
SN  - 0925-4005
VL  - 175
SP  - 208
EP  - 217
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamoto, Ko-ichiro
A1  - Kaneko, Kazumi
A1  - Matsuo, Akira
A1  - Wagner, Torsten
A1  - Kanoh, Shiníchiro
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Miniaturized chemical imaging sensor system using an OLED display panel
JF  - Sensors and Actuators B: Chemical
N2  - The chemical imaging sensor is a semiconductor-based chemical sensor that can visualize the two-dimensional distribution of specific ions or molecules in the solution. In this study, we developed a miniaturized chemical imaging sensor system with an OLED display panel as a light source that scans the sensor plate. In the proposed configuration, the display panel is placed directly below the sensor plate and illuminates the back surface. The measured area defined by illumination can be arbitrarily customized to fit the size and the shape of the sample to be measured. The waveform of the generated photocurrent, the current–voltage characteristics and the pH sensitivity were investigated and pH imaging with this miniaturized system was demonstrated.
KW  - LAPS
KW  - Light-addressable potentiometric sensor
KW  - Chemical imaging sensor
KW  - Organic light-emitting diode display
Y1  - 2012
U6  - https://doi.org/10.1016/j.snb.2011.02.029
SN  - 0925-4005
N1  - Part of special issue "Eurosensors XXIV, 2010"
VL  - 170
SP  - 82
EP  - 87
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Yoshinobu, Tatsuo
A1  - Miyamoto, Ko-Ichiro
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
ED  - Yamaguchi, Takami
T1  - Miniaturized and high-speed chemical imaging systems
T2  - Nano-Biomedical Engineering 2012. Proceedings of the Tohoku University Global Centre of Excellence Programme, Sakura Hall, Tohoku University, Sendai Japan, 5 – 6 March 2012
Y1  - 2012
U6  - https://doi.org/10.1142/9781848169067_0045
SP  - 386
EP  - 395
PB  - World Scientific
CY  - Singapur
ER  - 
TY  - JOUR
A1  - Bäcker, Matthias
A1  - Raue, Markus
A1  - Schusser, Sebastian
A1  - Jeitner, C.
A1  - Breuer, L.
A1  - Wagner, P.
A1  - Poghossian, Arshak
A1  - Förster, Arnold
A1  - Mang, Thomas
A1  - Schöning, Michael Josef
T1  - Microfluidic chip with integrated microvalves based on temperature- and pH-responsive hydrogel thin films
JF  - Physica Status Solidi  (a)
N2  - Two types of microvalves based on temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm) and pH-responsive poly(sodium acrylate) (PSA) hydrogel films have been developed and tested. The PNIPAAm and PSA hydrogel films were prepared by means of in situ photopolymerization directly inside the fluidic channel of a microfluidic chip fabricated by combining Si and SU-8 technologies. The swelling/shrinking properties and height changes of the PNIPAAm and PSA films inside the fluidic channel were studied at temperatures of deionized water from 14 to 36 °C and different pH values (pH 3–12) of Titrisol buffer, respectively. Additionally, in separate experiments, the lower critical solution temperature (LCST) of the PNIPAAm hydrogel was investigated by means of a differential scanning calorimetry (DSC) and a surface plasmon resonance (SPR) method. Mass-flow measurements have shown the feasibility of the prepared hydrogel films to work as an on-chip integrated temperature- or pH-responsive microvalve capable to switch the flow channel on/off.
Y1  - 2012
U6  - https://doi.org/10.1002/pssa.201100763
SN  - 1862-6319
VL  - 209
IS  - 5
SP  - 839
EP  - 845
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Lustfeld, H.
A1  - Pithan, C.
A1  - Reißel, Martin
T1  - Metallic electrolyte composites in the framework of the brick-layer model
JF  - Journal of the European Ceramic Society
N2  - It is well known that the already large dielectric constants of some electrolytes like BaTiO₃ can be enhanced further by adding metallic (e.g. Ni, Cu or Ag) nanoparticles. The enhancement can be quite large, a factor of more than 1000 is possible. The consequences for the properties will be discussed in the present paper applying a brick-layer model (BLM) for calculating dc-resistivities of thin layers and a modified one (PBLM) that includes percolation for calculating dielectric properties of these materials. The PBLM results in an at least qualitative description and understanding of the physical phenomena: This model gives an explanation for the steep increase of the dielectric constant below the percolation threshold and why this increase is connected to a dramatic decrease of the breakdown voltage as well as the ability of storing electrical energy. We conclude that metallic electrolyte composites like BaTiO₃ are not appropriate for energy storage.
Y1  - 2012
U6  - https://doi.org/10.1016/j.jeurceramsoc.2011.10.017
SN  - 0955-2219
VL  - 32
IS  - 4
SP  - 859
EP  - 864
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Bohrn, Ulrich
A1  - Stütz, Evamaria
A1  - Fleischer, Maximilian
A1  - Schöning, Michael Josef
A1  - Wagner, Patrick
T1  - Living cell-based gas sensor system for the detection of acetone in air
Y1  - 2012
SN  - 978-3-9813484-2-2
U6  - https://doi.org/10.5162/IMCS2012/3.2.3
SP  - 269
EP  - 272
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Limit and shakedown analysis under uncertainty
JF  - Tap chi Khoa hoc & ung dung - Dai hoc Ton Duc Thang
Y1  - 2012
N1  - = Journal of Applied Sciences - Ton Duc Thang University
VL  - 19
SP  - 45
EP  - 47
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Vu, Duc Khoi
T1  - Limit analysis of flaws in pressurized pipes and cylindrical vessels Part II: Circumferential defects
JF  - Engineering Fracture Mechanics ; 97(2013), H. 1
N2  - Upper and lower bound theorems of limit analyses have been presented in part I of the paper. Part II starts with the finite element discretization of these theorems and demonstrates how both can be combined in a primal–dual optimization problem. This recently proposed numerical method is used to guide the development of a new class of closed-form limit loads for circumferential defects, which show that only large defects contribute to plastic collapse with a rapid loss of strength with increasing crack sizes. The formulae are compared with primal–dual FEM limit analyses and with burst tests. Even closer predictions are obtained with iterative limit load solutions for the von Mises yield function and for the Tresca yield function. Pressure loading of the faces of interior cracks in thick pipes reduces the collapse load of circumferential defects more than for axial flaws. Axial defects have been treated in part I of the paper.
Y1  - 2012
U6  - https://doi.org/10.1016/j.engfracmech.2012.05.017
SN  - 0013-7944
VL  - 97
SP  - 314
EP  - 333
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Shigiahara, N.
A1  - Miyamoto, K.
A1  - Suzurikawa, J.
A1  - Finger, F.
A1  - Schöning, Michael Josef
A1  - Yoshinobu, T.
T1  - Light-addressable Potentiometric Sensors and Light–addressable Electrodes as a Combined Sensor-and-manipulator Microsystem with High Flexibility
JF  - Procedia Engineering
N2  - This work describes the novel combination of the light-addressable electrode (LAE) and the light-addressable potentiometric sensor (LAPS) into a microsystem set-up. Both the LAE as well as the LAPS shares the principle of addressing the active spot by means of a light beam. This enables both systems to manipulate resp. to detect an analyte with a high spatial resolution. Hence, combining both principles into a single set-up enables the active stimulation e.g., by means of electrolysis and a simultaneous observation e.g., the response of an entrapped biological cell by detection of extracellular pH changes. The work will describe the principles of both technologies and the necessary steps to integrate them into a single set-up. Furthermore, examples of application and operation of such systems will be presented.
Y1  - 2012
U6  - https://doi.org/10.1016/j.proeng.2012.09.290
SN  - 1877-7058
N1  - Part of special issue "26th European Conference on Solid-State Transducers, EUROSENSOR 2012"
IS  - 47
SP  - 890
EP  - 893
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Abouzar, Maryam H.
A1  - Poghossian, Arshak
A1  - Cherstvy, Andrey G.
A1  - Pedraza, Angela M.
A1  - Ingebrandt, Sven
A1  - Schöning, Michael Josef
T1  - Label-free electrical detection of DNA by means of field-effect nanoplate capacitors: Experiments and modeling
JF  - Physica Status Solidi (a)
N2  - Label-free electrical detection of consecutive deoxyribonucleic acid (DNA) hybridization/denaturation by means of an array of individually addressable field-effect-based nanoplate silicon-on-insulator (SOI) capacitors modified with gold nanoparticles (Au-NP) is investigated. The proposed device detects charge changes on Au-NP/DNA hybrids induced by the hybridization or denaturation event. DNA hybridization was performed in a high ionic-strength solution to provide a high hybridization efficiency. On the other hand, to reduce the screening of the DNA charge by counter ions and to achieve a high sensitivity, the sensor signal induced by the hybridization and denaturation events was measured in a low ionic-strength solution. High sensor signals of about 120, 90, and 80 mV were registered after the DNA hybridization, denaturation, and re-hybridization events, respectively. Fluorescence microscopy has been applied as reference method to verify the DNA immobilization, hybridization, and denaturation processes. An electrostatic charge-plane model for potential changes at the gate surface of a nanoplate field-effect sensor induced by the DNA hybridization has been developed taking into account both the Debye length and the distance of the DNA charge from the gate surface.
Y1  - 2012
U6  - https://doi.org/10.1002/pssa.201100710
SN  - 1862-6319
VL  - 209
SP  - 925
EP  - 934
PB  - Wiley-VCH
CY  - Weinheim
ER  -