TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Schiebahn, Alexander
T1  - Untersuchung zum Einfluss von Maschineneigenschaften von Schweißzangen zum Widerstandspunktschweißen auf das Schweißergebnis
JF  - Schweissen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren
Y1  - 2013
SN  - 0036-7184
VL  - Bd. 65
IS  - H. 6
SP  - 309
EP  - 313
PB  - DVS Verl.
CY  - Düsseldorf
ER  - 
TY  - RPRT
A1  - Schleser, Markus
T1  - Untersuchung des konduktiven Rührreibschweißens an Stahl- und Aluminiumwerkstoffen. Schlussbericht. Förderkennzeichen: AIF 15687 N
Y1  - 2011
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Uni- and bi-axial deformation behavior of laser welded advanced high strength steel sheets
JF  - Journal of materials processing technology
N2  - Bead-on-plate butt joints of 2.5 mm hot rolled DP600/DP600 and 1.2 mm cold rolled TRIP700/TRIP700 steel sheets were performed using 6 kW CO2 laser beam welding. The welding speed ranged from 1.5 to 3.0 and from 2.1 to 3.9 m/min in DP/DP and TRIP/TRIP steel weldments respectively. A top surface helium gas was used as a shielding gas at a flow rate of 20 l/min. Metallographic examinations and transverse tensile testing (DIN EN 895: 1995) were carried out to characterize the weldments. The formability of base metals and weldments were investigated by standard Erichsen test (DIN EN ISO 20482). It was found that the uniaxial plastic behavior of both DP600 and TRIP700 base metals was in agreement with Swift and modified Mecking–Kocks models respectively. In a perpendicular tensile test to the weld line, all specimens were fractured at the base metal however the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of both DP/DP and TRIP/TRIP steel weldments and the formability has been improved with the increase of the welding speed.
Y1  - 2010
U6  - http://dx.doi.org/http10.1016/j.jmatprotec.2010.08.003
SN  - 0924-0136
VL  - 210
IS  - 15
SP  - 2188
EP  - 2196
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Berg, Alexander-Karl
A1  - Schleser, Markus
A1  - Delidovich, Artem
A1  - Houben, Alexander
T1  - Ultraschallunterstützter Schmelzklebstoffauftrag
JF  - adhäsion KLEBEN & DICHTEN
Y1  - 2018
U6  - http://dx.doi.org/10.1007/s35145-018-0089-z
VL  - Volume 62
IS  - Issue 12
SP  - 32
EP  - 37
PB  - Springer
ER  - 
TY  - JOUR
A1  - Scheik, Sven
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Thermisches Direktfügen von Metall und Kusntstoff: eine Alternative zur Klebtechnik
JF  - Adhäsion : Kleben & Dichten
N2  - Im Rahmen des Exzellenzclusters „Integrative Produktionstechnik für Hochlohnländer“ der RWTHAachen University werden derzeit alternative Verfahren zur Herstellung von Metall/Kunststoff- Verbindungen untersucht. Eines davon ist das thermische Direktfügen, das eine stoffschlüssige Verbindung zwischen Kunststoff und Metall ermöglicht und ohne die Verwendung von Klebstoffen, Haftvermittlern oder mechanischen Verbindungshilfen auskommt.
Y1  - 2012
U6  - http://dx.doi.org/10.1007/s35145-012-0005-x
SN  - 0001-8198 (E-Journal); 0001-8198 (Print)
N1  - Printausg. in der Bibliothek der FH Aachen vorhanden: 63 Z 807-2012
VL  - 56
IS  - 11
SP  - 36
EP  - 40
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Schoene, Jens
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Jerabek, Jakub
ED  - Curbach, Manfred
T1  - Theoretische und experimentelle Untersuchung des spaltungsinduzierten Versagens von TRC Prüfkörpern
T2  - Textilbeton - Theorie und Praxis : Tagungsband zum 6. Kolloquium zu textilbewehrten Tragwerken (CTRS6); gemeinsames Abschlusskolloquium der Sonderforschungsbereiche 528 (Dresden) und 532 (Aachen), Berlin 19.9.2011 - 20.9.2011
Y1  - 2011
SN  - 978-3-86780-245-1
SP  - 73
EP  - 84
PB  - Techn. Univ.
CY  - Dresden
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Jerabek, Jakub
A1  - Keil, Allessandra
ED  - Brameshuber, Wolfgang
T1  - Theoretical and experimental investigations on textile-reinforced concrete spalling behavior
T2  - Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ;  75)
Y1  - 2010
SN  - 978-2-35158-106-3
SP  - 153
EP  - 162
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Schoene, Jens
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Jerabek, Jakub
A1  - Chudoba, Rostislav
ED  - Fisher, Gregor
T1  - Theoretical and experimental investigations on textile-reinforced concrete spalling behavior
T2  - 8th International PhD Symposium in Civil Engineering : Lyngby, June 20-23, 2010 : proceedings
Y1  - 2010
SN  - 9788778773012
SP  - 383
EP  - 388
PB  - Technical University of Denmark, Dept. of Civil Engineering
CY  - Lyngby
ER  - 
TY  - CHAP
A1  - Walk-Lauffer, Bernd
A1  - Raupach, Michael
A1  - Dilger, Klaus
A1  - Böhm, Stefan
A1  - Mundt, F.
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
T1  - The interconnection between inner filaments of textile reinforcement by means of polymer modified concrete
T2  - Proceedings of the First International Conference on Innovative Materials and Technologies for Construction and Restoration : : Lecce, June 6 - 9, 2004 / Università degli Studi di Lecce / ed. Antonio La Tegola. Vol. 1: Key-notes, materials, construction
Y1  - 2004
SP  - 150
EP  - 159
PB  - Liguori
CY  - Napoli
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Statistical modeling of laser welding of DP/TRIP steel sheets
JF  - Optics and laser technology
N2  - In this research work, a statistical analysis of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets was done using response surface methodology. The analysis considered the effect of laser power (2–2.2 kW), welding speed (40–50 mm/s) and focus position (−1 to 0 mm) on the heat input, the weld bead geometry, uniaxial tensile strength, formability limited dome height and welding operation cost. The experimental design was based on Box–Behnken design using linear and quadratic polynomial equations for predicting the mathematical models. The results indicate that the proposed models predict the responses adequately within the limits of welding parameters being used and the welding speed is the most significant parameter during the welding process.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.optlastec.2011.05.025
SN  - 1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)
VL  - 44
IS  - 1
SP  - 92
EP  - 101
PB  - Elsevier
CY  - Amsterdam
ER  -