TY  - JOUR
A1  - Bohrn, U.
A1  - Stütz, E.
A1  - Fuchs, K.
A1  - Fleischer, M.
A1  - Schöning, Michael Josef
A1  - Wagner, P.
T1  - Monitoring of irritant gas using a whole-cell-based sensor system
JF  - Sensors and Actuators B: Chemical
N2  - Cell-based sensors for the detection of gases have long been underrepresented, due to the cellular requirement of being cultured in a liquid environment. In this work we established a cell-based gas biosensor for the detection of toxic substances in air, by adapting a commercial sensor chip (Bionas®), previously used for the measurement of pollutants in liquids. Cells of the respiratory tract (A549, RPMI 2650, V79), which survive at a gas phase in a natural context, are used as biological receptors. The physiological cell parameters acidification, respiration and morphology are continuously monitored in parallel. Ammonia was used as a highly water-soluble model gas to test the feasibility of the sensor system. Infrared measurements confirmed the sufficiency of the medium draining method. This sensor system provides a basis for many sensor applications such as environmental monitoring, building technology and public security.
Y1  - 2012
U6  - https://doi.org/10.1016/j.snb.2012.05.088
SN  - 0925-4005
VL  - 175
SP  - 208
EP  - 217
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - PAT
A1  - Frauenrath, Tobias
A1  - Niendorf, Thoralf
T1  - MRT-Vorrichtung und Verfahren zum Betreiben einer MRT-Vorrichtung
T1  - Magnetic resonance tomography (MRT) apparatus and method of operating a magnetic resonance (MR) apparatus
T1  - Appareil de tomographie par résonance magnétique et procédé de fonctionnement d'un appareil à résonance magnétique
N2  - A magnetic resonance tomography (MRT) apparatus (1) for the examination of a body (14) comprises parameter acquisition devices (13) for the acquisition of cardiovascular parameters of the body (14) and a control device (15) in communication with the parameter acquisition devices (13) for synchronizing the imaging, wherein the control device (15) is adapted to analyse the data of at least two parameter acquisition devices (13) and to output a control signal based on the analysis.
Y1  - 2012
ER  - 
TY  - CHAP
A1  - Schöning, Michael Josef
A1  - Abdelghani, Adnane
T1  - Nanoscale Science and Technology (NS&T’12) : Proceedings Book Humboldt Kolleg <2012, Tunisia>  ; Tunisia, 17-19 March, 2012 / ed. by Michael J. Schöning ; Adnane Abdelghani
N2  - Proceedings of the 2nd Humboldt Kolleg, Hammamet, Tunisia Organizer: Alexander von Humboldt Stiftung, Germany. pdf 184 p. Welcome Address Dear Participants, Welcome to the 2nd Humboldt Kolleg in “Nanoscale Science and Technology” (NS&T’12) in Tunisia, sponsored by the "Alexander von Humboldt" foundation. The NS&T’12 multidisciplinary scientific program includes seven "hot" topics dealing with "Nanoscale Science and Technology" covering basic and application-oriented research as well as industrial (market) aspects: - Molecular Biophyics, Spectroscopy Techniques, Imaging Microscopy - Nanomaterials Synthesis for Medicine and Bio-chemical Sensors - Nanostructures, Semiconductors, Photonics and Nanodevices - New Technologies in Market Industry - Environment, Electro-chemistry, Bio-polymers and Fuel Cells - Nanomaterials, Photovoltaic, Modelling, Quantum Physics - Microelectronics, Sensors Networks and Embedded Systems We are deeply indebted to all members of the Scientific Committee and General Chairs for joint Sessions and to all speakers and chairmen, who have dedicated invaluable time and efforts for the realization of this event. On behalf of the Organizing Committee, we are cordially inviting you to join the conference and hope that your stay will be fruitful, rewarding and enjoyable. Prof. Dr. Michael J. Schöning, Prof. Dr. Adnane Abdelghani
KW  - Biosensor
KW  - Nanotechnologie
KW  - Nanomaterial
KW  - Nano Materials
KW  - Bio-Sensors
Y1  - 2012
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-3544
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Holtschoppen, Britta
T1  - Neuer VCI-Leitfaden für die erdbebensichere Auslegung von Industrieanlagen
JF  - Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik
Y1  - 2012
SN  - 1436-4867 (E-Journal); 0005-6650 (Print)
VL  - Band 87
SP  - S18
PB  - VDI Fachmedien
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Trenz, Eva
A1  - Lohmann, Philipp
A1  - Frotscher, Ralf
A1  - Klinge, Uwe
A1  - Tabaza, Ruth
A1  - Kirschner-Hermanns, Ruth
T1  - New measurements to compare soft tissue anchoring systems in pelvic floor surgery
JF  - Journal of Biomedical Materials Research Part B: Applied Biomaterials
N2  - Suburethral slings as well as different meshes are widely used treating stress urinary incontinence and prolaps in women. With the development of MiniSlings and special meshes using less alloplastic material anchorage systems become more important to keep devices in place and to put some tension especially on the MiniSlings. To date, there are many different systems of MiniSlings of different companies on the market which differ in the structure of the used meshes and anchors. A new objective measurement method to compare different properties of MiniSling systems (mesh and anchor) is presented in this article. Ballistic gelatine acts as soft tissue surrogate. Significant differences in parameters like pull-out strength of anchors or shrinkage of meshes under loading conditions have been determined. The form and size of the anchors as well as the structural stability of the meshes are decisive for a proper integration. The tested anchorings sytems showed markedly different mechanical function at their respective load bearing capacity. As the stable fixation of the device in tissue is a prerequisite for a permanet reinforcement, the proposed test system permits further optimisation of anchor and mesh devices to improve the success of the surgical treatment
Y1  - 2012
U6  - https://doi.org/10.1002/jbm.b.32654
SN  - 1552-4981
VL  - 100B
IS  - 4
SP  - 924
EP  - 933
PB  - Wiley
CY  - Hoboken, NJ
ER  - 
TY  - JOUR
A1  - Iken, Heiko
A1  - Kirsanov, D.
A1  - Legin, A.
A1  - Schöning, Michael Josef
T1  - Novel Thin-Film Polymeric Materials for the Detection of Heavy Metals
JF  - Procedia Engineering
N2  - A variety of transition metals, e.g., copper, zinc, cadmium, lead, etc. are widely used in industry as components for wires, coatings, alloys, batteries, paints and so on. The inevitable presence of transition metals in industrial processes implies the ambition of developing a proper analytical technique for their adequate monitoring. Most of these elements, especially lead and cadmium, are acutely toxic for biological organisms. Quantitative determination of these metals at low activity levels in different environmental and industrial samples is therefore a vital task. A promising approach to achieve an at-side or on-line monitoring on a miniaturized and cost efficient way is the combination of a common potentiometric sensor array with heavy metal-sensitive thin-film materials, like chalcogenide glasses and polymeric materials, respectively.
Y1  - 2012
U6  - https://doi.org/10.1016/j.proeng.2012.09.148
SN  - 1877-7058
N1  - Part of special issue "26th European Conference on Solid-State Transducers, EUROSENSOR 2012"
IS  - 47
SP  - 322
EP  - 325
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Börner, Sebastian
A1  - Keinz, Jan
A1  - Kusterer, K.
A1  - Kroninger, D.
A1  - Kitajima, J.
A1  - Kazari, M.
A1  - Horikama, A.
T1  - Numerical and experimental characterization of low NOx Micromix combustion principle for industrial hydrogen gas turbine applications
T2  - Proceedings of ASME Turbo Expo 2012
Y1  - 2013
N1  - ASME Turbo Expo 2012, GT2012, June 11-15, 2012, Copenhagen, Denmark
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Nguyen, Nhu Huynh
A1  - Staat, Manfred
ED  - Eberhardsteiner, J.
T1  - Numerical stability enhancement of modeling hyperelastic materials
T2  - Proceedings European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)
Y1  - 2012
N1  - 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012
ER  - 
TY  - JOUR
A1  - Werner, Frederik
A1  - Groebel, Simone
A1  - Krumbe, Christoph
A1  - Wagner, Torsten
A1  - Selmer, Thorsten
A1  - Yoshinobu, Tatsuo
A1  - Baumann, Marcus
A1  - Schöning, Michael Josef
T1  - Nutrient concentration-sensitive microorganism-based biosensor
JF  - Physica Status Solidi (a)
Y1  - 2012
U6  - https://doi.org/10.1002/pssa.201100801
SN  - 1862-6319
VL  - 209
IS  - 5
SP  - 900
EP  - 904
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - GEN
A1  - Wiesen, S.
A1  - Tippkötter, Nils
A1  - Muffler, K.
A1  - Sohling, U.
A1  - Ruf, F.
A1  - Ulber, Roland
T1  - Nutzung von Rohglycerin: Rohglycerin-Aufarbeitung, Herstellung von 1, 3-Propandiol und Rückgewinnung von Fettsäuren
T2  - Chemie Ingenieur Technik
N2  - Die fermentative Verwertung von Rohglycerin setzt je nach Herstellungsmethode und Produktionsorganismus eine Vorbehandlung des Glycerins zur Entfernung von Produktinhibitoren voraus. Durch den Einsatz von Hydrotalcit-Adsorbern können die im Rohglycerin enthaltenen Fettsäuren entfernt werden. Durch diese einfache Aufarbeitungsmethode ist ein mit reinem Glycerin vergleichbarer Umsatz von stark mit Fettsäuren verunreinigtem Rohglycerin zu 1,3-Propandiol (PDO) möglich. Die durch den Hydrotalcit gebundenen Fettsäuren lassen sich mit einem Ethanol-Wasser-Gemisch eluieren. Somit kann der Adsorber regeneriert und die Fettsäuren wieder der Wertschöpfungskette zugeführt werden. Im Fed-Batch-Experiment kann mit C. diolis eine PDO-Konzentration von über 50 g L⁻¹ unter Verwendung des aufgereinigten Rohglycerins erzielt werden. In der industriellen Produktion wird PDO momentan destillativ aufgearbeitet. Ein adsorptives Aufarbeitungsverfahren kann den Energiebedarf des Herstellungsprozesses drastisch senken. Auf der Suche nach einem geeigneten Material wurde ein Adsorberscreening in Bezug auf die Bindungseigenschaften durchgeführt. Mit einem b-Zeolith der Firma Süd ChemieAG konnte bisher die höchste Beladung im Modellsystem von 120 mg PDO/gAdsorber erreicht werden.
Y1  - 2012
U6  - https://doi.org/10.1002/cite.201250265
SN  - 0009-286X
SN  - 1522-2640 (eISSN)
N1  - ProcessNet-Jahrestagung 2012 und 30. DECHEMA-Jahrestagung der Biotechnologen, 10. – 13. September 2012, Karlsruhe
VL  - 84
IS  - 8
SP  - 1296
PB  - Wiley-VCH
CY  - Weinheim
ER  -