TY - CHAP A1 - Butenweg, Christoph T1 - Passt, wackelt und hat Luft: Mauerwerksbauten aus Leichtbeton in Erdbebengebieten T2 - Beton-Bauteile, 65. Ausgabe (2017): Entwerfen - Planen - Ausführen Y1 - 2017 SN - 978-3-7625-3676-5 N1 - gedruckt in der Bereichsbibliothek Bayernallee unter der Signatur 11 XCF 81-2017 vorhanden SP - 136 EP - 140 PB - Bauverl. CY - Gütersloh ER - TY - CHAP A1 - Borggrafe, Andreas A1 - Ohndorf, Andreas A1 - Dachwald, Bernd A1 - Seboldt, Wolfgang T1 - Analysis of interplanetary solar sail trajectories with attitude dynamics T2 - Dynamics and Control of Space Systems 2012 N2 - We present a new approach to the problem of optimal control of solar sails for low-thrust trajectory optimization. The objective was to find the required control torque magnitudes in order to steer a solar sail in interplanetary space. A new steering strategy, controlling the solar sail with generic torques applied about the spacecraft body axes, is integrated into the existing low-thrust trajectory optimization software InTrance. This software combines artificial neural networks and evolutionary algorithms to find steering strategies close to the global optimum without an initial guess. Furthermore, we implement a three rotational degree-of-freedom rigid-body attitude dynamics model to represent the solar sail in space. Two interplanetary transfers to Mars and Neptune are chosen to represent typical future solar sail mission scenarios. The results found with the new steering strategy are compared to the existing reference trajectories without attitude dynamics. The resulting control torques required to accomplish the missions are investigated, as they pose the primary requirements to a real on-board attitude control system. Y1 - 2012 SN - 978-0-87703-587-9 SP - 1553 EP - 1569 PB - Univelt Inc CY - San Diego ER - TY - CHAP A1 - Wolf, Martin R. A1 - Foltz, Christian A1 - Luczak, Holger ED - Nagl, Manfred T1 - Gestaltung und Evaluation eines Groupware-Konzepts T2 - Modelle, Werkzeuge und Infrastrukturen zur Unterstützung von Entwicklungsprozessen Y1 - 2003 SN - 3-527-27769-2 SP - 359 EP - 360 PB - Wiley-VCH CY - Weinheim ER - TY - CHAP A1 - Luczak, Holger A1 - Wolf, Martin R. A1 - Mühlfelder, M. ED - Schwabe, Gerhard T1 - Arbeitswissenschaft T2 - CSCW-Kompendium : Lehr- und Handbuch zum computerunterstützten kooperativen Arbeiten ; mit 9 Tabellen N2 - Unter Arbeit wird das Tätigsein des Menschen verstanden, bei dem dieser mit anderen Menschen und (technischen) Hilfsmitteln in Interaktion tritt, um unter wirtschaftlichen Zielsetzungen Güter und Dienstleistungen zu erstellen (Luczak, 1998a). Arbeit dient direkt oder indirekt der Erhaltung der eigenen Existenz und der Existenz der Gesellschaft. Arbeit ist deshalb eine besondere Form des Tätigseins neben anderen wie Spiel, Sport, Lemen usw. Y1 - 2001 SN - 978-3-540-67552-5 SN - 978-3-642-56848-0 U6 - https://doi.org/10.1007/978-3-642-56848-0_2 SP - 7 EP - 14 PB - Springer CY - Berlin ER - TY - CHAP A1 - Pieper, Martin A1 - Wählisch, Georg T1 - Mehrwert von E-Learning durch fächerübergreifenden Einsatz T2 - Teaching is Touching the Future & ePS 2016 - Kompetenzorientiertes Lehren, Lernen und Prüfen Y1 - 2017 SN - 978-3-946017-05-9 SP - 193 EP - 196 PB - UVW Universitätsverlag Webler CY - Bielefeld ER - TY - CHAP A1 - Niemueller, Tim A1 - Reuter, Sebastian A1 - Ewert, Daniel A1 - Ferrein, Alexander A1 - Jeschke, Sabina A1 - Lakemeyer, Gerhard T1 - Decisive Factors for the Success of the Carologistics RoboCup Team in the RoboCup Logistics League 2014 T2 - RoboCup 2014: Robot World Cup XVIII Y1 - 2015 SN - 978-3-319-18615-3 N1 - Lecture Notes in Computer Science ; 8992 SP - 155 EP - 167 PB - Springer ER - TY - CHAP A1 - Bergener, Philipp A1 - Delfmann, Patrick A1 - Eggert, Mathias A1 - Fritz, Fleur A1 - Heddier, Marcel A1 - Herring, Eva-Maria A1 - Hofmann, Sara A1 - Knackstedt, Ralf A1 - Meiländer, Dominique A1 - Meyer, Eric A1 - Räckers, Michael A1 - Seiler, Julia ED - Becker, Jörg ED - Bergener, Philipp ED - Eggert, Mathias ED - Heddier, Marcel ED - Hofmann, Sara ED - Knackstedt, Ralf ED - Räckers, Michael T1 - Forschungsperspektiven im Kontext Informationstechnik und Recht T2 - IT-Risiken: Ursachen, Methoden, Forschungsperspektiven, Arbeitsberichte des Instituts für Wirtschaftsinformatik Y1 - 2010 SN - 1438-3985 IS - 128 SP - 115 EP - 147 PB - Institut für Wirtschaftsinformatik CY - Münster ER - TY - CHAP A1 - Dachwald, Bernd A1 - Ohndorf, Andreas T1 - Global optimization of continuous-thrust trajectories using evolutionary neurocontrol T2 - Modeling and Optimization in Space Engineering N2 - Searching optimal continuous-thrust trajectories is usually a difficult and time-consuming task. The solution quality of traditional optimal-control methods depends strongly on an adequate initial guess because the solution is typically close to the initial guess, which may be far from the (unknown) global optimum. Evolutionary neurocontrol attacks continuous-thrust optimization problems from the perspective of artificial intelligence and machine learning, combining artificial neural networks and evolutionary algorithms. This chapter describes the method and shows some example results for single- and multi-phase continuous-thrust trajectory optimization problems to assess its performance. Evolutionary neurocontrol can explore the trajectory search space more exhaustively than a human expert can do with traditional optimal-control methods. Especially for difficult problems, it usually finds solutions that are closer to the global optimum. Another fundamental advantage is that continuous-thrust trajectories can be optimized without an initial guess and without expert supervision. Y1 - 2019 SN - 978-3-030-10501-3 SN - 978-3-030-10500-6 U6 - https://doi.org/10.1007/978-3-030-10501-3_2 N1 - Springer Optimization and Its Applications, vol 144 gedruckt unter der Signatur 21 ZSS 46 in der Bereichsbibliothek Eupener Str. vorhanden SP - 33 EP - 57 PB - Springer CY - Cham ER - TY - CHAP A1 - Niemueller, T. A1 - Lakemeyer, G. A1 - Reuter, S. A1 - Jeschke, S. A1 - Ferrein, Alexander T1 - Benchmarking of Cyber-Physical Systems in Industrial Robotics: The RoboCup Logistics League as a CPS Benchmark Blueprint T2 - Cyber-Physical Systems: Foundations, Principles and Applications N2 - In the future, we expect manufacturing companies to follow a new paradigm that mandates more automation and autonomy in production processes. Such smart factories will offer a variety of production technologies as services that can be combined ad hoc to produce a large number of different product types and variants cost-effectively even in small lot sizes. This is enabled by cyber-physical systems that feature flexible automated planning methods for production scheduling, execution control, and in-factory logistics. During development, testbeds are required to determine the applicability of integrated systems in such scenarios. Furthermore, benchmarks are needed to quantify and compare system performance in these industry-inspired scenarios at a comprehensible and manageable size which is, at the same time, complex enough to yield meaningful results. In this chapter, based on our experience in the RoboCup Logistics League (RCLL) as a specific example, we derive a generic blueprint for how a holistic benchmark can be developed, which combines a specific scenario with a set of key performance indicators as metrics to evaluate the overall integrated system and its components. KW - Smart factory KW - Industry 4.0 KW - Cyber-physical systems KW - Multi-robot systems KW - Autonomous mobile robots Y1 - 2017 U6 - https://doi.org/10.1016/B978-0-12-803801-7.00013-4 SP - 193 EP - 207 PB - Academic Press CY - London ER - TY - CHAP A1 - Rebel, Sören A1 - Hüning, Felix A1 - Scholl, Ingrid A1 - Ferrein, Alexander T1 - MQOne: Low-cost design for a rugged-terrain robot platform T2 - Intelligent robotics and applications : 8th International Conference, ICIRA 2015, Portsmouth, UK, August 24-27, 2015, Proceedings, Part II (Lecture notes in computer science : vol. 9245) N2 - Rugged terrain robot designs are important for field robotics missions. A number of commercial platforms are available, however, at an impressive price. In this paper, we describe the hardware and software component of a low-cost wheeled rugged-terrain robot. The robot is based on an electric children quad bike and is modified to be driven by wire. In terms of climbing properties, operation time and payload it can compete with some of the commercially available platforms, but at a far lower price. Y1 - 2015 SN - 978-3-319-22875-4 (print) ; 978-3-319-22876-1 (E-Book) U6 - https://doi.org/10.1007/978-3-319-22876-1_19 SP - 209 EP - 221 PB - Springer CY - Cham ER -