TY  - JOUR
A1  - Müller, Martin
A1  - Hirschfeld, Julian
A1  - Lambertz, Rita
A1  - Schulze Lohoff, Andreas
A1  - Lustfeld, Hans
A1  - Pfeifer, Heinz
A1  - Reißel, Martin
T1  - Validation of a novel method for detecting and stabilizing malfunctioning areas in fuel cell stacks
JF  - Journal of power sources
N2  - In this paper a setup for detecting malfunctioning areas of MEAs in fuel cell stacks is described. Malfunctioning areas generate electric cross currents inside bipolar plates. To exploit this we suggest bipolar plates consisting not of two but of three layers. The third one is a highly conducting layer and segmented such that the cross currents move along the segments to the surface of the stack where they can be measured by an inductive sensor. With this information a realistic model can be used to detect the malfunctioning area. Furthermore the third layer will prevent any current inhomogeneity of a malfunctioning cell to spread to neighbouring cells in the stack. In this work the results of measurements in a realistic cell setup will be compared with the results obtained in simulation studies with the same configuration. The basis for the comparison is the reliable characterisation of the electrical properties of the cell components and the implication of these results into the simulation model. The experimental studies will also show the limits in the maximum number of segments, which can be used for a reliable detection of cross currents.
Y1  - 2014
U6  - https://doi.org/10.1016/j.jpowsour.2014.08.045
SN  - 1873-2755 (E-Journal); 0378-7753 (Print)
VL  - 272
SP  - 225
EP  - 232
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Stadler, Alexander Maximilian
A1  - Garvey, Christopher J.
A1  - Embs, Jan Peter
A1  - Koza, Michael Marek
A1  - Unruh, Tobias
A1  - Artmann, Gerhard
A1  - Zaccai, Guiseppe
T1  - Picosecond dynamics in haemoglobin from different species: A quasielastic neutron scattering study
JF  - Biochimica et biophysica acta (BBA): General Subjects
Y1  - 2014
U6  - https://doi.org/10.1016/j.bbagen.2014.06.007
SN  - 1872-8006 (E-Journal); 0304-4165 (Print)
VL  - 1840
IS  - 10
SP  - 2989
EP  - 2999
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Buniatyan, V. V.
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Rustamyan, L. G.
A1  - Hovnikyan, H. H.
T1  - Equivalent circuit and optimization of impedance characteristics of an electrolyte conductivity sensor
T2  - Proceedings of State Engineering University Armenia : Series Information technologies, electronics, radio engineering
Y1  - 2014
VL  - Iss. 17
IS  - No. 1
SP  - 69
EP  - 76
ER  - 
TY  - JOUR
A1  - Kluczka, Sven
A1  - Eckstein, Julian
A1  - Alexopoulos, Spiros
A1  - Vaeßen, Christiane
A1  - Roeb, Martin
T1  - Process simulation for solar steam and dry reforming
JF  - Energy procedia : Proceedings of the SolarPACES 2013 International Conference
N2  - In co-operation with the German Aerospace Center, the Solar-Institut Jülich has been analyzing the different technologies that are available for methanol production from CO2 using solar energy. The aim of the project is to extract CO2 from industrial exhaust gases or directly from the atmosphere to recycle it by use of solar energy. Part of the study was the modeling and simulating of a methane reformer for the production of synthesis gas, which can be operated by solar or hybrid heat sources. The reformer has been simplified in such a way that the model is accurate and enables fast calculations. The developed pseudo-homogeneous one- dimensional model can be regarded as a kind of counter-current heat exchanger and is able to incorporate a steam reforming reaction as well as a dry reforming reaction.
Y1  - 2014
U6  - https://doi.org/10.1016/j.egypro.2014.03.092
SN  - 1876-6102 (E-Journal)
VL  - 49
SP  - 850
EP  - 859
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Haj Ayed, A.
A1  - Kusterer, K.
A1  - Keinz, Jan
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Numerical Study on Increased Energy Density for the DLN Micromix Hydrogen Combustion Principle
T2  - Combustion, Fuels and Emissions (ASME Turbo Expo 2014: Turbine Technical Conference and Exposition : Düsseldorf, Germany, June 16–20, 2014 ; Vol. 4A)
Y1  - 2014
SN  - 978-0-7918-4568-4
N1  - Paper No. GT2014-25848
SP  - V04AT04A057
PB  - ASME
CY  - New York, N.Y.
ER  - 
TY  - JOUR
A1  - Ratke, Lorenz
A1  - Milow, Barbara
A1  - Lisinski, Susanne
A1  - Hoepfner, Sandra
T1  - On an effect of fine ceramic particles on the structure of aerogels
JF  - Microgravity science and technology
Y1  - 2014
U6  - https://doi.org/10.1007/s12217-014-9380-2
SN  - 0938-0108 ; 1875-0494
VL  - 26
SP  - 103
EP  - 110
PB  - Springer Nature
CY  - Heidelberg
ER  - 
TY  - JOUR
A1  - Leandro, J.
A1  - Bung, Daniel Bernhard
A1  - Carvalho, R.
T1  - Measuring void fraction and velocity fields of a stepped spillway for skimming flow using non-intrusive methods
JF  - Experiments in fluids
Y1  - 2014
U6  - https://doi.org/10.1007/s00348-014-1732-6
SN  - 0723-4864 (Print) ; 1432-1114 (Online)
IS  - 55
SP  - Art. 1732
PB  - Springer Nature
CY  - Heidelberg
ER  - 
TY  - CHAP
A1  - Bung, Daniel Bernhard
A1  - Oertel, Mario
T1  - Manipulation of non-aerated cavity flow on a stepped spillway model
T2  - 3rd European IAHR Congress : April 14 – 16, 2014, Porto
Y1  - 2014
PB  - Univ. of Porto
CY  - Porto
ER  - 
TY  - CHAP
A1  - Rousseau, Alain
A1  - Kern, Alexander
T1  - How to deal with environmental risk in IEC 62305-2
T2  - 2014 International Conference on Lightning Protection (ICLP), Shanghai, China
N2  - The 2nd edition of the lightning risk management
standard (IEC 62305-2) considers structures, which may
endanger environment. In these cases, the loss is not limited to
the structure itself, which is valid for usual structures. In the past
(Edition 1) this danger was simply taken into account by a special
hazard factor, multiplying the existing risk for the structure with
a number. Now, in the edition 2, we add to the risk for the
structure itself a “second risk” due to the losses outside the
structure. The losses outside can be treated independently from
what occurs inside. This is a major advantage to analyze the risk
for sensitive structures, like chemical plants, nuclear plants, or
structures containing explosives, etc. In this paper, the existing
procedure given by the European version EN 62305-2 Ed.2 is
further developed and applied to a few structures.
Y1  - 2014
SP  - 521
EP  - 527
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Braun, Christian
T1  - Risk management according to IEC 62305-2 edition 2: 2010–12 assessment of structures with a risk of explosion
T2  - 2014 International Conference on Lightning Protection (ICLP), Shanghai, China
N2  - Risk management for structures with a risk of explosion should be considered very carefully when performing a risk analysis according to IEC 62305-2. In contrast to the 2006 edition of the standard, the 2010 edition describes the topic “Structures with a risk of explosion” in more detail. Moreover, in Germany separate procedures and parameters are defined for the risk analysis of structures with a risk of explosion (Supplement 3 of the German DIN EN 62305-2 standard). This paper describes the contents and the relevant calculations of this Supplement 3, together with a numerical example.
Y1  - 2014
SP  - 1237
EP  - 1242
ER  -