TY  - CHAP
A1  - Müller, Tim M.
A1  - Schmitt, Andreas
A1  - Leise, Philipp
A1  - Meck, Tobias
A1  - Altherr, Lena
A1  - Pelz, Peter F.
A1  - Pfetsch, Marc E.
T1  - Validation of an optimized resilient water supply system
T2  - Uncertainty in Mechanical Engineering
N2  - Component failures within water supply systems can lead to significant performance losses. One way to address these losses is the explicit anticipation of failures within the design process. We consider a water supply system for high-rise buildings, where pump failures are the most likely failure scenarios. We explicitly consider these failures within an early design stage which leads to a more resilient system, i.e., a system which is able to operate under a predefined number of arbitrary pump failures. We use a mathematical optimization approach to compute such a resilient design. This is based on a multi-stage model for topology optimization, which can be described by a system of nonlinear inequalities and integrality constraints. Such a model has to be both computationally tractable and to represent the real-world system accurately. We therefore validate the algorithmic solutions using experiments on a scaled test rig for high-rise buildings. The test rig allows for an arbitrary connection of pumps to reproduce scaled versions of booster station designs for high-rise buildings. We experimentally verify the applicability of the presented optimization model and that the proposed resilience properties are also fulfilled in real systems.
KW  - Optimization
KW  - Mixed-integer nonlinear programming
KW  - Water distribution system
KW  - Resilience
KW  - Validation
Y1  - 2021
SN  - 978-3-030-77255-0
SN  - 978-3-030-77256-7
U6  - http://dx.doi.org/10.1007/978-3-030-77256-7_7
N1  - Proceedings of the 4th International Conference on Uncertainty in Mechanical Engineering (ICUME 2021), June 7–8, 2021
SP  - 70
EP  - 80
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Müller-Abdelrazeq, Sarah Luisa
A1  - Brauner, Philipp
A1  - Calero Valdez, André
A1  - Jansen, Ulrich
A1  - Platte, Laura
A1  - Schaar, Anne-Kathrin
A1  - Steuer-Dankert, Linda
A1  - Zachow, Sebastian
A1  - Schönefeld, Kathrin
A1  - Haberstroh, Max
A1  - Leicht-Scholten, Carmen
A1  - Ziefle, Martina
ED  - Pather, Shaun
T1  - Interdisciplinary cooperation management in research clusters: a review of twelve years.
T2  - Proceedings of the 15th International Conference on Intellectual Capital, Knowledge Management & Organisational Learning
N2  - As an interdisciplinary research network, the Cluster of Excellence “Integrative Production Technology for High-Wage Countries” (CoE) comprises of around 150 researchers. Their scientific background ranges from mechanical engineering and computer science to social sciences such as sociology and psychology. In addition to content- and methodbased challenges, the CoE’s employees are faced with heterogenic organizational cultures, different hierarchical levels, an imbalanced gender distribution, and a high employee fluctuation. The sub-project Scientific Cooperation Engineering 1 (CSP1) addresses the challenge of interdisciplinary cooperation and organizational learning and aims at fostering interdisciplinarity and its synergies as a source of innovation. Therefore, the project examines means of reaching an organizational development, ranging from temporal structures to a sustainable network in production technology. To achieve this aim, a broad range of means has been developed during the last twelve years: In addition to physical measures such as regular network events and trainings, virtual measures such as the Terminology App were focused. The app is an algorithmic analysis method for uncovering latent topic structures of publications of the CoE to highlight thematic intersections and synergy potentials. The detection and promotion of has been a vital and long known element in knowledge management. Furthermore, CSP1 focusses on project management and thus developed evaluation tools to measure and control the success of interdisciplinary cooperation. In addition to the cooperation fostering measures, CSP1 conducted studies about interdisciplinarity and diversity and their relationship with innovation. The scientific background of these means and the research results of CSP1 are outlined in this paper to offer approaches for successful interdisciplinary cooperation management.
Y1  - 2018
SN  - 978-1-912764-09-9
N1  - hosted by University of the Western Cape, South Africa 29-30 November 2018
SP  - 216
EP  - 224
PB  - ACPIL
ER  - 
TY  - CHAP
A1  - Müller-Veggian, Mattea
A1  - Bochev, B.
A1  - Lieder, R. M.
A1  - Didelez, J. P.
T1  - Measuremenmt of particle spectra of α induced non-equilibrium reactions for ²⁰⁶⁻²¹² Po
T2  - Proceedings of the International Conference on Nuclear Physics. 1980,1 (1981)
Y1  - 1981
N1  - Vol. 1: Abstracts of papers ; International Conference on Nuclear Physics <1980, Berkeley, Calif.>
SP  - 452
ER  - 
TY  - CHAP
A1  - Müller-Veggian, Mattea
A1  - Dehnhardt, W.
A1  - Merdinger, I. G.
A1  - Mills, S. J.
T1  - High-spin yrast states in transitional nuclei ¹³²,¹³⁴ Ce
T2  - Proceedings of the International Conference on Nuclear Physics : Munich, August 27 - September 1, 1973
Y1  - 1973
SN  - 0-7204-0280-8
SP  - 180
PB  - North Holland Pub.
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Müller-Veggian, Mattea
A1  - Dehnhardt, W.
A1  - Mills, J. S.
T1  - Levels in the closed neutron shell nucleus ¹⁴² Nd
T2  - International Symposium on Highly Excited States in Nuclei held at Jülich from 23-26 September 1975 : proceedings; Vol. 1 Contributed papers
Y1  - 1975
N1  - International Symposium on Highly Excited States in Nuclei <1975, Jülich> ;  European Physical Society ; Institut für Kernphysik <Jülich>
SP  - 51
PB  - Verlag des Forschungszentrums Jülich
CY  - Jülich
ER  - 
TY  - CHAP
A1  - Müller-Veggian, Mattea
A1  - Haenni, D. R.
A1  - Beuscher, H.
A1  - Lieder, R. M.
T1  - Weak coupling of a neutron hole to a ¹⁴⁶ Gd core ; an in-beam study of ¹⁴⁵ Gd
T2  - Structure of medium-heavy nuclei, 1979 : proceedings of the 6. European Physical Soc. Nuclear Divisional Conference on the Structure of Medium-Heavy Nuclei held in Rhodes, Greece, 1-4 May 1979 / ed. Committee: G. S. Anagnostatos ... - (Conference series / Institute of Physics London, Bristol ; 49)
Y1  - 1980
SN  - 0-85498-140-3
N1  - Conference on the Structure of Medium Heavy Nuclei <6, 1979, Rodos> ; European Physical Society / Nuclear Physics Division
SP  - 133
PB  - Inst. of Physics
CY  - Bristol
ER  - 
TY  - CHAP
A1  - Müller-Veggian, Mattea
A1  - Neskakis, A.
A1  - Lieder, R. M.
A1  - Beuscher, H.
T1  - Study of rotational aligned bands in ¹⁹⁰,¹⁹²,¹⁹⁴ Au
T2  - Nuclear interactions : International Conference on Nuclear Interactions held in Canberra, 28 Aug. - 1 Sept. 1978 / ed. by Brian Albert Robson. - (Lecture notes in physics ; 92)
Y1  - 1978
SN  - 978-3-540-09102-8
N1  - Australian Academy of Science <Canberra> ; International Conference on Nuclear Interactions <1978, Canberra>
SP  - 428
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Nakagawa, Masaki
A1  - Kallweit, Stephan
A1  - Michaux, Frank
A1  - Hojo, Teppei
T1  - Typical Velocity Fields and Vortical Structures around a Formula One Car, based on Experimental Investigations using Particle Image Velocimetry
T2  - SAE International Journal of Passenger Cars - Mechanical Systems
Y1  - 2016
U6  - http://dx.doi.org/10.4271/2016-01-1611
SN  - 1946-4002
ER  - 
TY  - CHAP
A1  - Neth, Jannik
A1  - Schuba, Marko
A1  - Brodkorb, Karsten
A1  - Neugebauer, Georg
A1  - Höner, Tim
A1  - Hack, Sacha
T1  - Digital forensics triage app for android
T2  - ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security
N2  - Digital forensics of smartphones is of utmost importance in many criminal cases. As modern smartphones store chats, photos, videos etc. that can be relevant for investigations and as they can have storage capacities of hundreds of gigabytes, they are a primary target for forensic investigators. However, it is exactly this large amount of data that is causing problems: extracting and examining the data from multiple phones seized in the context of a case is taking more and more time. This bears the risk of wasting a lot of time with irrelevant phones while there is not enough time left to analyze a phone which is worth examination. Forensic triage can help in this case: Such a triage is a preselection step based on a subset of data and is performed before fully extracting all the data from the smartphone. Triage can accelerate subsequent investigations and is especially useful in cases where time is essential. The aim of this paper is to determine which and how much data from an Android smartphone can be made directly accessible to the forensic investigator – without tedious investigations. For this purpose, an app has been developed that can be used with extremely limited storage of data in the handset and which outputs the extracted data immediately to the forensic workstation in a human- and machine-readable format.
KW  - Android
KW  - Digital triage
KW  - Triage-app
Y1  - 2023
SN  - 9798400707728
U6  - http://dx.doi.org/10.1145/3600160.3605017
N1  - ARES 2023: The 18th International Conference on Availability, Reliability and Security. August 29 - September 1, 2023. Benevento, Italy.
PB  - ACM
ER  - 
TY  - CHAP
A1  - Neu, Eugen
A1  - Janser, Frank
A1  - Khatibi, Akbar A.
A1  - Orifici, Adrian C.
T1  - Operational modal analysis of a cantilever in a wind tunnel using optical fiber bragg grating sensors
T2  - 6th International Operational Modal Analysis Conference. IOMAC´15. 2015 May 12-14 Gijon - Spain
Y1  - 2015
U6  - http://dx.doi.org/10.13140/RG.2.1.3753.0324
ER  - 
TY  - CHAP
A1  - Neu, Eugen
A1  - Janser, Frank
A1  - Khatibi, Akbar A.
A1  - Orifici, Adrian C.
T1  - In-flight vibration-based structural health monitoring of aircraft wings
T2  - 30th Congress of the internatonal council of the aeronautical sciences : 25.-30. September 2016, Daejeon, Korea
N2  - This work presents a methodology for automated
damage-sensitive feature extraction and anomaly
detection under multivariate operational variability
for in-flight assessment of wings. The
method uses a passive excitation approach, i. e.
without the need for artificial actuation. The
modal system properties (natural frequencies and
damping ratios) are used as damage-sensitive
features. Special emphasis is placed on the use
of Fiber Bragg Grating (FBG) sensing technology
and the consideration of Operational and
Environmental Variability (OEV). Measurements
from a wind tunnel investigation with a composite
cantilever equipped with FBG and piezoelectric
sensors are used to successfully detect an impact
damage. In addition, the feasibility of damage
localisation and severity estimation is evaluated
based on the coupling found between damageand
OEV-induced feature changes.
Y1  - 2016
ER  - 
TY  - CHAP
A1  - Neugebauer, Georg
A1  - Brutschy, Lucas
A1  - Meyer, Ulrike
A1  - Wetzel, Susanne
ED  - Garcia-Alfaro, Joaquin
ED  - Lioudakis, Georgios
ED  - Cuppens-Boulahia, Nora
ED  - Foley, Simon
ED  - Fitzgerald, William M.
T1  - Privacy-preserving multi-party reconciliation secure in the malicious model
T2  - DPM 2013, SETOP 2013: Data Privacy Management and Autonomous Spontaneous Security
N2  - The problem of fair and privacy-preserving ordered set reconciliation arises in a variety of applications like auctions, e-voting, and appointment reconciliation. While several multi-party protocols have been proposed that solve this problem in the semi-honest model, there are no multi-party protocols that are secure in the malicious model so far. In this paper, we close this gap. Our newly proposed protocols are shown to be secure in the malicious model based on a variety of novel non-interactive zero-knowledge-proofs. We describe the implementation of our protocols and evaluate their performance in comparison to protocols solving the problem in the semi-honest case.
KW  - Privacy-enhancing technologies
KW  - Secure multi-party computation
KW  - Cryptographic protocols
KW  - Zero-knowledge proofs
KW  - Malicious model
Y1  - 2014
SN  - 978-3-642-54567-2 (Print)
SN  - 978-3-642-54568-9 (Online)
U6  - http://dx.doi.org/10.1007/978-3-642-54568-9_12
N1  - 8th International Workshop, DPM 2013, and 6th International Workshop, SETOP 2013, Egham, UK, September 12-13, 2013.

Part of the Lecture Notes in Computer Science book series (LNSC,volume 8247)
SP  - 178
EP  - 193
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Neumann, Hannah
A1  - Adam, Mario
A1  - Backes, Klaus
A1  - Börner, Martin
A1  - Clees, Tanja
A1  - Doetsch, Christian
A1  - Glaeser, Susanne
A1  - Herrmann, Ulf
A1  - May, Johanna
A1  - Rosenthal, Florian
A1  - Sauer, Dirk Uwe
A1  - Stadler, Ingo
T1  - Development of open educational resources for renewable energy and the energy transition process
T2  - ISES SWC 2021
N2  - The dissemination of knowledge about renewable energies is understood as a social task with the highest topicality. The transfer of teaching content on renewable energies into digital open educational resources offers the opportunity to significantly accelerate the implementation of the energy transition. Thus, in the here presented project six German universities create open educational resources for the energy transition. These materials are available to the public on the internet under a free license. So far there has been no publicly accessible, editable media that cover entire learning units about renewable energies extensively and in high technical quality. Thus, in this project, the content that remains up-to-date for a longer period is appropriately prepared in terms of media didactics. The materials enable lecturers to provide students with in-depth training about technologies for the energy transition. In a particular way, the created material is also suitable for making the general public knowledgeable about the energy transition with scientifically based material.
KW  - energy transition
KW  - renewable energies
KW  - open educational resources
KW  - dissemination
KW  - digitalization
Y1  - 2021
U6  - http://dx.doi.org/10.18086/swc.2021.47.03
N1  - ISES Solar World Congress, virtual conference 25-29 October 2021
PB  - International Solar Energy Society
CY  - Freiburg
ER  - 
TY  - CHAP
A1  - Neumann, Tobias
A1  - Dülberg, Enno
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - A rotating platform for swift acquisition of dense 3D point clouds
T2  - Intelligent Robotics and Applications: 9th International Conference, ICIRA 2016, Tokyo, Japan, August 22-24, 2016, Proceedings, Part I
Y1  - 2016
SN  - 978-3-319-43505-3 (Print)
SN  - 978-3-319-43506-0 (Online)
U6  - http://dx.doi.org/10.1007/978-3-319-43506-0_22
N1  - Series: Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
VL  - 9834
SP  - 257
EP  - 268
PB  - Springer
ER  - 
TY  - CHAP
A1  - Neumann, Tobias
A1  - Ferrein, Alexander
A1  - Kallweit, Stephan
A1  - Scholl, Ingrid
T1  - Towards a mobile mapping robot for underground mines
T2  - 7th Conference of Robotics and Mechatronics : RobMech 2014 : 27th and 28th Nov. 2014, Cape Town
Y1  - 2014
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Niedermeier, H.
A1  - Clemens, J.
A1  - Kowalski, Julia
A1  - Macht, S.
A1  - Heinen, D.
A1  - Hoffmann, R.
A1  - Linder, Peter
T1  - Navigation system for a research ice probe for antarctic glaciers
T2  - IEEE/ION Position, Location and Navigation Symposium (PLANS) ; 5-8 May 2014, Monterey, Calif.
Y1  - 2014
SN  - 978-1-4799-3319-8
SP  - 959
EP  - 975
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Niederwestberg, Stefan
A1  - Schneider, Falko
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Introduction to a direct irradiated transparent tube particle receiver
T2  - SOLARPACES 2020
N2  - New materials often lead to innovations and advantages in technical applications. This also applies to the particle receiver proposed in this work that deploys high-temperature and scratch resistant transparent ceramics. With this receiver design, particles are heated through direct-contact concentrated solar irradiance while flowing downwards through tubular transparent ceramics from top to bottom. In this paper, the developed particle receiver as well as advantages and disadvantages are described. Investigations on the particle heat-up characteristics from solar irradiance were carried out with DEM simulations which indicate that particle temperatures can reach up to 1200 K. Additionally, a simulation model was set up for investigating the dynamic behavior. A test receiver at laboratory scale has been designed and is currently being built. In upcoming tests, the receiver test rig will be used to validate the simulation results. The design and the measurement equipment is described in this work.
KW  - Solar irradiance
KW  - Ceramics
Y1  - 2022
SN  - 978-0-7354-4195-8
U6  - http://dx.doi.org/10.1063/5.0086735
SN  - 1551-7616 (online)
SN  - 0094-243X (print)
N1  - 26th International Conference on Concentrating Solar Power and Chemical Energy Systems
28 September–2 October 2020
Freiburg, Germany
IS  - 2445 / 1
PB  - AIP conference proceedings / American Institute of Physics
CY  - Melville, NY
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Lakemeyer, Gerhard
A1  - Ferrein, Alexander
ED  - Finzi, Alberto
T1  - The RoboCup Logistics League as a Benchmark for Planning in Robotics
T2  - Proceedings of the 3rd Workshop on Planning and Robotics (PlanRob-15); Jerusalem, Israel 7-8/6/2015
Y1  - 2015
SP  - 63
EP  - 68
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Neumann, Tobias
A1  - Henke, Christoph
A1  - Schönitz, Sebastian
A1  - Reuter, Sebastian
A1  - Ferrein, Alexander
A1  - Jeschke, Sabina
A1  - Lakemeyer, Gerhard
T1  - Improvements for a robust production in the RoboCup logistics league 2016
T2  - RoboCup 2016: Robot World Cup XX. RoboCup 2016.
Y1  - 2017
SN  - 978-3-319-68792-6
U6  - http://dx.doi.org/10.1007/978-3-319-68792-6_49
SP  - 589
EP  - 600
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Neumann, Tobias
A1  - Henke, Christoph
A1  - Schönitz, Sebastian
A1  - Reuter, Sebastian
A1  - Ferrein, Alexander
A1  - Jeschke, Sabina
A1  - Lakemeyer, Gerhard
T1  - International Harting Open Source Award 2016: Fawkes for the RoboCup Logistics League
T2  - RoboCup 2016: RoboCup 2016: Robot World Cup XX. RoboCup 2016
Y1  - 2017
SN  - 978-3-319-68792-6
U6  - http://dx.doi.org/10.1007/978-3-319-68792-6_53
N1  - Lecture Notes in Computer Science, LNCS, Vol 9776
SP  - 634
EP  - 642
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Reuter, Sebastian
A1  - Ewert, Daniel
A1  - Ferrein, Alexander
A1  - Jeschke, Sabina
A1  - Lakemeyer, Gerhard
ED  - Almeida, Luis
T1  - The Carologistics Approach to Cope with the Increased Complexity and New Challenges of the RoboCup Logistics League 2015
T2  - RoboCup 2015: Robot World Cup XIX
Y1  - 2016
SN  - 978-3-319-29339-4
U6  - http://dx.doi.org/10.1007/978-3-319-29339-4_4
N1  - Lecture Notes in Computer Science ; 9513
SP  - 47
EP  - 59
PB  - Springer International Publishing
CY  - Cham
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Reuter, Sebastian
A1  - Ferrein, Alexander
ED  - Almeida, Luis
T1  - Fawkes for the RoboCup Logistics League
T2  - RoboCup 2015: Robot World Cup XIX
Y1  - 2016
SN  - 978-3-319-29339-4
U6  - http://dx.doi.org/10.1007/978-3-319-29339-4_31
N1  - Lecture Notes in Computer Science ; 9513
SP  - 365
EP  - 373
PB  - Springer International Publishing
CY  - Cham
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Reuter, Sebastian
A1  - Ferrein, Alexander
A1  - Jeschke, Sabina
A1  - Lakemeyer, Gerhard
ED  - Almeida, Luis
T1  - Evaluation of the RoboCup Logistics League and Derived Criteria for Future Competitions
T2  - RoboCup 2015: Robot World Cup XIX
Y1  - 2016
SN  - 978-3-319-29339-4
U6  - http://dx.doi.org/10.1007/978-3-319-29339-4_3
N1  - Lecture Notes in Computer Science ; 9513
SP  - 31
EP  - 43
PB  - Springer International Publishing
CY  - Cham
ER  - 
TY  - CHAP
A1  - Niemüller, Tim
A1  - Ewert, Daniel
A1  - Reuter, Sebastian
A1  - Ferrein, Alexander
A1  - Jeschke, Sabina
A1  - Lakemeyer, Gerhard
T1  - The Carologistics RoboCup Logistics Team 2013
T2  - RoboCup 2013 : Eindhoven
Y1  - 2013
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Niemüller, Tim
A1  - Ewert, Daniel
A1  - Reuter, Sebastian
A1  - Karras, Ulrich
A1  - Ferrein, Alexander
T1  - Towards benchmarking cyber-physical systems in factory automation scenarios
T2  - KI 2013: advances in artificial intelligence : 36th Annual German Conference on AI, Koblenz, Germany, September 16-20, 2013 ; proceedings / Ingo J. Timm ... (ed.). (Lecture notes in computer science ; 8077)
Y1  - 2013
SN  - 978-3-642-40941-7
SP  - 296
EP  - 299
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - CHAP
A1  - Niemüller, Tim
A1  - Lakemeyer, Gerhard
A1  - Ferrein, Alexander
T1  - Aspects of integrating diverse software into robotic systems extended abstract
T2  - ICRA 2013 - 8th Workshop on Software Development and Integration in Robotics (SDIR), Karlsruhe, Germany
Y1  - 2013
SP  - 1
EP  - 2
ER  - 
TY  - CHAP
A1  - Niemüller, Tim
A1  - Lakemeyer, Gerhard
A1  - Ferrein, Alexander
ED  - Boots, Byron
T1  - Incremental task-level reasoning in a competitive factory automation scenario
T2  - Designing intelligent robots : reintegrating AI II ; papers from the AAAI spring symposium ; [held March 25 - 27, 2013 in Palo Alto, California, USA, on the campus of Stanford University]. (Technical Report / Association for the Advancement of Artificial Intelligence ; 2013,4)
Y1  - 2013
SN  - 9781577356011
SP  - 43
EP  - 48
ER  - 
TY  - CHAP
A1  - Nierle, Elisabeth
A1  - Pieper, Martin
T1  - Measuring social impacts in engineering education to improve sustainability skills
T2  - European Society for Engineering Education (SEFI)
N2  - In times of social climate protection movements, such as Fridays for Future, the priorities of society, industry and higher education are currently changing. The consideration of sustainability challenges is increasing. In the context of sustainable development, social skills are crucial to achieving the United Nations Sustainable Development Goals (SDGs). In particular, the impact that educational activities have on people, communities and society is therefore coming to the fore. Research has shown that people with high levels of social competence are better able to manage stressful situations, maintain positive relationships and communicate effectively. They are also associated with better academic performance and career success. However, especially in engineering programs, the social pillar is underrepresented compared to the environmental and economic pillars.

In response to these changes, higher education institutions should be more aware of their social impact - from individual forms of teaching to entire modules and degree programs. To specifically determine the potential for improvement and derive resulting change for further development, we present an initial framework for social impact measurement by transferring already established approaches from the business sector to the education sector. To demonstrate the applicability, we measure the key competencies taught in undergraduate engineering programs in Germany.

The aim is to prepare the students for success in the modern world of work and their future contribution to sustainable development. Additionally, the university can include the results in its sustainability report. Our method can be applied to different teaching methods and enables their comparison.
KW  - Social impact measurement
KW  - Key competences
KW  - Sustainable engineering education
KW  - Future skills
Y1  - 2023
U6  - http://dx.doi.org/10.21427/QPR4-0T22
N1  - 51st Annual Conference of the European Society for Engineering Education (SEFI)
N1  - Corresponding Author: Elisabeth Nierle
ER  - 
TY  - CHAP
A1  - Nikolovski, Gjorgji
A1  - Limpert, Nicolas
A1  - Nessau, Hendrik
A1  - Reke, Michael
A1  - Ferrein, Alexander
T1  - Model-predictive control with parallelised optimisation for the navigation of autonomous mining vehicles
T2  - 2023 IEEE Intelligent Vehicles Symposium (IV)
N2  - The work in modern open-pit and underground mines requires the transportation of large amounts of resources between fixed points. The navigation to these fixed points is a repetitive task that can be automated. The challenge in automating the navigation of vehicles commonly used in mines is the systemic properties of such vehicles. Many mining vehicles, such as the one we have used in the research for this paper, use steering systems with an articulated joint bending the vehicle’s drive axis to change its course and a hydraulic drive system to actuate axial drive components or the movements of tippers if available. To address the difficulties of controlling such a vehicle, we present a model-predictive approach for controlling the vehicle. While the control optimisation based on a parallel error minimisation of the predicted state has already been established in the past, we provide insight into the design and implementation of an MPC for an articulated mining vehicle and show the results of real-world experiments in an open-pit mine environment.
KW  - Mpc
KW  - Control
KW  - Path-following
KW  - Navigation
KW  - Automation
Y1  - 2023
SN  - 979-8-3503-4691-6 (Online)
SN  - 979-8-3503-4692-3 (Print)
U6  - http://dx.doi.org/10.1109/IV55152.2023.10186806
N1  - IEEE Symposium on Intelligent Vehicle, 4.-7. June 2023, Anchorage, AK, USA.
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Nikolovski, Gjorgji
A1  - Reke, Michael
A1  - Elsen, Ingo
A1  - Schiffer, Stefan
T1  - Machine learning based 3D object detection for navigation in unstructured environments
T2  - 2021 IEEE Intelligent Vehicles Symposium Workshops (IV Workshops)
N2  - In this paper we investigate the use of deep neural networks for 3D object detection in uncommon, unstructured environments such as in an open-pit mine. While neural nets are frequently used for object detection in regular autonomous driving applications, more unusual driving scenarios aside street traffic pose additional challenges. For one, the collection of appropriate data sets to train the networks is an issue. For another, testing the performance of trained networks often requires tailored integration with the particular domain as well. While there exist different solutions for these problems in regular autonomous driving, there are only very few approaches that work for special domains just as well. We address both the challenges above in this work. First, we discuss two possible ways of acquiring data for training and evaluation. That is, we evaluate a semi-automated annotation of recorded LIDAR data and we examine synthetic data generation. Using these datasets we train and test different deep neural network for the task of object detection. Second, we propose a possible integration of a ROS2 detector module for an autonomous driving platform. Finally, we present the performance of three state-of-the-art deep neural networks in the domain of 3D object detection on a synthetic dataset and a smaller one containing a characteristic object from an open-pit mine.
KW  - 3D object detection
KW  - LiDAR
KW  - autonomous driving
KW  - Deep learning
KW  - Three-dimensional displays
Y1  - 2021
SN  - 978-1-6654-7921-9
U6  - http://dx.doi.org/10.1109/IVWorkshops54471.2021.9669218
N1  - 2021 IEEE Intelligent Vehicles Symposium Workshops (IV Workshops), 11-17 July 2021,  Nagoya, Japan.
SP  - 236
EP  - 242
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Nix, Yvonne
A1  - Frotscher, Ralf
A1  - Staat, Manfred
ED  - Eberhardsteiner, J.
T1  - Implementation of the edge-based smoothed extended finite element method
T2  - Proceedings 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012
Y1  - 2012
ER  - 
TY  - CHAP
A1  - Nowack, N.
A1  - Röth, Thilo
A1  - Bührig-Polaczek, A.
A1  - Klaus, G.
ED  - Hirsch, Jürgen
T1  - Advanced Sheet Metal Components Reinforced by Light Metal Cast Structures
T2  - Aluminium alloys : their physical and mechanical properties ; [proceedings of the 11th International Conference on Aluminium Alloys, 22 - 26 Sept. 2008, Aachen, Germany ; ICAA 11]
Y1  - 2008
SN  - 978-3-527-32367-8
IS  - 2
SP  - 2374
EP  - 2381
ER  - 
TY  - CHAP
A1  - Nursinski-Stolberg, André
A1  - Gangatharan, Kiritharan
A1  - Czarnecki, Christian
ED  - Mayr, Heinrich C.
ED  - Pinzger, Martin
T1  - Development of a subject-oriented reference process model for the telecommunications industry
T2  - GI Edition Proceedings Band 259 INFORMATIK 2016
N2  - Generally the usage of reference models can be structured top-down or bottom-up. The practical need of agile change and flexible organizational implementation requires a consistent mapping to an operational level. In this context, well-established reference process models are typically structured top-down. The subject-oriented Business Process Management (sBPM) offers a modeling concept that is structured bottom-up and concentrates on the process actors on an
operational level. This paper applies sBPM to the enhanced Telecom Operations Map (eTOM), a well-accepted reference process model in the telecommunications industry. The resulting design artifact is a concrete example for a combination of a bottom-up and top-down developed reference model. The results are evaluated and confirmed in practical context through the involvement of the industry body TMForum.
KW  - Subject-oriented Business Process Management
KW  - Reference Process Model
KW  - eTOM
KW  - Telecommunications Industry.
Y1  - 2016
SN  - 9783885796534
SN  - 1617-5468
N1  - 26.-30. September 2016, Klagenfurt.
SP  - 699
EP  - 712
PB  - Gesellschaft für Informatik e.V.
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Näther, Niko
A1  - Poghossian, Arshak
A1  - Platen, J.
A1  - Yoshinobu, T.
A1  - Koudelka-Hep, M.
A1  - Schöning, Michael Josef
T1  - Multi-parameter sensing of both physical and (bio-)chemical quantities using the same transducer principle
T2  - Biochemical sensing utilisation of micro- and nanotechnologies : Warsaw, [23rd - 26th] November 2005 / ed. by M. Mascini ...
Y1  - 2006
SP  - 172
EP  - 181
CY  - Warsaw
ER  - 
TY  - CHAP
A1  - Nötzold, K.
A1  - Uphues, A.
A1  - Wegener, R.
A1  - Fink, K.
A1  - Bragard, Michael
A1  - Griessel, R.
A1  - Soter, S.
T1  - Inverter based test setup for LVRT verification of a full-scale 2 MW wind power converter
T2  - 15th European Conference on Power Electronics and Applications (EPE), 2013 : 2 - 6 Sept. 2013, Lille, France / [EPE Association; PELS, IEEE Power Electronics Society]
Y1  - 2013
SN  - 978-1-4799-0115-9 (Online-Ausg.)
U6  - http://dx.doi.org/10.1109/EPE.2013.6634752
SP  - 1037
EP  - 1042
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Nötzold, K.
A1  - Uphues, A.
A1  - Wegener, R.
A1  - Soter, S.
A1  - Fink, K.
A1  - Bragard, Michael
A1  - Griessel, R.
T1  - Inverter based test setup for LVRT verification of a full-scale 2 MW wind power converter
T2  - EPE Joint Wind Energy and T&D Chapters Seminar : 28th and 29th of June 2012, in the Utzon Centre, Aalborg, Denmark ; papers, posters, presentations. - Session 2: Grid connection, compliance
Y1  - 2012
PB  - EPE Association
CY  - Brussels
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Arreola, Julio
A1  - Hansen, Christina
A1  - Greeff, Anton
A1  - Mayer, Marlena
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Impedimetric Biosensor to Enable Fast Evaluation of Gaseous Sterilization Processes
T2  - MDPI Proceedings
Y1  - 2017
U6  - http://dx.doi.org/10.3390/proceedings1040435
N1  - Eurosensors 2017 Conference, Paris, France, 3–6 September 2017
VL  - 1
IS  - 4
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Wendeler, Luisa
A1  - Bromm, Alexander
A1  - Iken, Heiko
A1  - Wagner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Experimental and numerical evaluation of interdigitated electrode array for monitoring gaseous sterilization processes
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - http://dx.doi.org/10.5162/12dss2015/P3.11
SP  - 163
EP  - 168
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Kirchner, Patrick
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Flexible polyimide-based calorimetric gas sensors for monitoring hy-drogen peroxide in sterilisation processes of aseptic filling machines
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 4
PB  - VDE-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Oertel, M.
A1  - Bung, Daniel B.
ED  - Crookston, B.
ED  - Tullis, B.
T1  - Scouring processes downstream a crossbar block ramp
BT  - Session 3: Scour, erosion, sedimentation
T2  - Hydraulic Structures and Water System Management. 6th IAHR International Symposium on Hydraulic Structures, Portland, OR, 27-30 June 2016
Y1  - 2016
SN  - 978-1-884575-75-4
U6  - http://dx.doi.org/10.15142/T3340628160853
SP  - 549
EP  - 559
ER  - 
TY  - CHAP
A1  - Oertel, M.
A1  - Bung, Daniel B.
A1  - Schlenkhoff, Andreas
T1  - Flash flood awareness and prevention
T2  - Water engineering for sustainable environment : 33rd IAHR congress ; 9 - 14 August 2009, Vancouver, British Columbia, Canada
Y1  - 2009
SN  - 9789078046080
SP  - 1 CD-ROM
ER  - 
TY  - CHAP
A1  - Oertel, Mario
A1  - Balmes, Jan P.
A1  - Bung, Daniel B.
T1  - Numerical simulation of erosion processes on crossbar block ramps
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Oertel, Mario
A1  - Bung, Daniel B.
T1  - Characteristics of cross-bar block ramp flows
T2  - Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto
Y1  - 2012
SN  - 978-989-8509-01-7
ER  - 
TY  - CHAP
A1  - Oertel, Mario
A1  - Bung, Daniel B.
T1  - Comparison of 2D dam-break waves with VOF and SPH method
T2  - Proceedings of the 35th IAHR world congress : 8.-13.9.2013, Chengdu, China
Y1  - 2013
SP  - Artikelkennnummer: A11113
PB  - Tsinghua Univ. Press
CY  - Beijing
ER  - 
TY  - CHAP
A1  - Ohndorf, Andreas
A1  - Dachwald, Bernd
A1  - Seboldt, Wolfgang
A1  - Schartner, Karl-Heinz
T1  - Flight times to the heliopause using a combination of solar and radioisotope electric propulsion
T2  - 32nd International Electric Propulsion Conference
N2  - We investigate the interplanetary flight of a low-thrust space probe to the heliopause,located at a distance of about 200 AU from the Sun. Our goal was to reach this distance within the 25 years postulated by ESA for such a mission (which is less ambitious than the 15-year goal set by NASA). Contrary to solar sail concepts and combinations of allistic and electrically propelled flight legs, we have investigated whether the set flight time limit could also be kept with a combination of solar-electric propulsion and a second, RTG-powered upper stage. The used ion engine type was the RIT-22 for the first stage and the RIT-10 for the second stage. Trajectory optimization was carried out with the low-thrust optimization program InTrance, which implements the method of Evolutionary Neurocontrol,using Artificial Neural Networks for spacecraft steering and Evolutionary Algorithms to optimize the Neural Networks’ parameter set. Based on a parameter space study, in which the number of thrust units, the unit’s specific impulse, and the relative size of the solar power generator were varied, we have chosen one configuration as reference. The transfer time of this reference configuration was 29.6 years and the fastest one, which is technically
more challenging, still required 28.3 years. As all flight times of this parameter study were longer than 25 years, we further shortened the transfer time by applying a launcher-provided hyperbolic excess energy up to 49 km2/s2. The resulting minimal flight time for the reference configuration was then 27.8 years. The following, more precise optimization to a launch with the European Ariane 5 ECA rocket reduced the transfer time to 27.5 years. This is the fastest mission design of our study that is flexible enough to allow a launch every
year. The inclusion of a fly-by at Jupiter finally resulted in a flight time of 23.8 years,which is below the set transfer-time limit. However, compared to the 27.5-year transfer,this mission design has a significantly reduced launch window and mission flexibility if the
escape direction is restricted to the heliosphere’s “nose".
KW  - low-thrust trajectory optimization
KW  - heliosphere
KW  - ion propulsion
Y1  - 2011
N1  - IEPC-2011-051
32nd International Electric Propulsion Conference,September 11–15, 2011
Wiesbaden, Germany
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Olaru, Alexandra Maria
A1  - Kowalski, Julia
A1  - Sethi, Vaishali
A1  - Blümich, Bernhard
T1  - Fluid Transport in Porous Media probed by Relaxation-Exchange NMR
T2  - 2011 Fall Meeting, AGU, San Francisco, Calif., 5-9 Dec.
Y1  - 2011
N1  - H12B-07; American Geophysical Union
ER  - 
TY  - CHAP
A1  - Olderog, M.
A1  - Mohr, P.
A1  - Beging, Stefan
A1  - Tsoumpas, C.
A1  - Ziemons, Karl
T1  - Simulation study on the role of tissue-scattered events in improving sensitivity for a compact time of flight compton positron emission tomograph
T2  - 2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)
N2  - In positron emission tomography improving time, energy and spatial detector resolutions and using Compton kinematics introduces the possibility to reconstruct a radioactivity distribution image from scatter coincidences, thereby enhancing image quality. The number of single scattered coincidences alone is in the same order of magnitude as true coincidences. In this work, a compact Compton camera module based on monolithic scintillation material is investigated as a detector ring module. The detector interactions are simulated with Monte Carlo package GATE. The scattering angle inside the tissue is derived from the energy of the scattered photon, which results in a set of possible scattering trajectories or broken line of response. The Compton kinematics collimation reduces the number of solutions. Additionally, the time of flight information helps localize the position of the annihilation. One of the questions of this investigation is related to how the energy, spatial and temporal resolutions help confine the possible annihilation volume. A comparison of currently technically feasible detector resolutions (under laboratory conditions) demonstrates the influence on this annihilation volume and shows that energy and coincidence time resolution have a significant impact. An enhancement of the latter from 400 ps to 100 ps leads to a smaller annihilation volume of around 50%, while a change of the energy resolution in the absorber layer from 12% to 4.5% results in a reduction of 60%. The inclusion of single tissue-scattered data has the potential to increase the sensitivity of a scanner by a factor of 2 to 3 times. The concept can be further optimized and extended for multiple scatter coincidences and subsequently validated by a reconstruction algorithm.
Y1  - 2021
SN  - 978-1-7281-7693-2
U6  - http://dx.doi.org/10.1109/NSS/MIC42677.2020.9507901
N1  - 2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), 31 Oct.-7 Nov. 2020, Boston, MA, USA
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Ostkotte, Sebastian
A1  - Peters, Constantin
A1  - Hüning, Felix
A1  - Bragard, Michael
T1  - Design, implementation and verification of an rotational incremental position encoder based on the magnetic Wiegand effect
T2  - 2022 ELEKTRO (ELEKTRO)
N2  - This paper covers the use of the magnetic Wiegand effect to design an innovative incremental encoder. First, a theoretical design is given, followed by an estimation of the achievable accuracy and an optimization in open-loop operation.
Finally, a successful experimental verification is presented. For this purpose, a permanent magnet synchronous machine is controlled in a field-oriented manner, using the angle information of the prototype.
KW  - Position Encoder
KW  - Rotational Encoder
KW  - Wiegand Effect
KW  - Angle Sensor
KW  - Incremental Encoder
Y1  - 2022
SN  - 978-1-6654-6726-1
SN  - 978-1-6654-6727-8
U6  - http://dx.doi.org/10.1109/ELEKTRO53996.2022.9803477
SN  - 2691-0616
N1  - 2022 ELEKTRO (ELEKTRO), 23-26 Mai 2022, Krakow, Poland.
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Otten, D.
A1  - Schmid, M.
A1  - Weber, Tobias
T1  - Advances In Sheet Metal-Forming: Reduction Of Tooling Cost By Methodical Optimization
T2  - Proceedings of SAMPE Europe Conference, Amiens , France
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Otten, D.
A1  - Schmidt, M.
A1  - Weber, Tobias
T1  - Advances in Determination of Material Parameters for Functional Simulations Based on Process Simulations
T2  - SAMPE Europe Conference 16 Liege
Y1  - 2016
SN  - 978-1-5108-3800-0
SP  - 570
EP  - 577
ER  - 
TY  - CHAP
A1  - Pak, Daniel
A1  - Piegeler, D.
A1  - Feldmann, Markus
A1  - Schleser, Markus
A1  - Dilthey, Ulrich
ED  - Hegger, Josef
T1  - Hybrid joints of textile reinforced concrete parts - designed for assembly
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 181
EP  - 190
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Park, Jin
A1  - El-Daib, Khaled
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
T1  - A novel macroelement approach for masonry walls
T2  - Proceedings of the 8th International Conference on Structural Dynamics, EURODYN 2011 : Leuven, Belgium, 4 - 6 July 2011 / Katholieke Universiteit Leuven, ... G. De Roeck ... (eds)
Y1  - 2011
SN  - 978-90-76019-31-4
SP  - 3281
EP  - 3286
PB  - K. U. Leuven, Dep. of Civil Engineering
CY  - Leuven
ER  - 
TY  - CHAP
A1  - Paulsen, Svea
A1  - Hoffstadt, Kevin
A1  - Krafft, Simone
A1  - Leite, A.
A1  - Zang, J.
A1  - Fonseca-Zang, W.
A1  - Kuperjans, Isabel
T1  - Continuous biogas production from sugarcane as sole substrate
T2  - Energy Reports
Y1  - 2020
U6  - http://dx.doi.org/10.1016/j.egyr.2019.08.035
N1  - 6th International Conference on Energy and Environment Research, ICEER 2019, 22–25 July, University of Aveiro, Portugal
VL  - 6
IS  - Supplement 1
SP  - 153
EP  - 158
PB  - Elsevier
ER  - 
TY  - CHAP
A1  - Peeken, Heinz
A1  - Troeder, Christoph
A1  - Benner, Joachim
A1  - Platt, Werner
T1  - A new approach to describe the mechanical performance of flexible couplings in drive systems
T2  - Proceedings of the International Conference on Rotordynamics : September 14 - 17, 1986, Tokyo
Y1  - 1986
N1  - International Conference on Rotordynamics <1986, Tōkyō>
SP  - 159
EP  - 163
PB  - IFToMM
CY  - Tokyo
ER  - 
TY  - CHAP
A1  - Peeken, Heinz
A1  - Troeder, Christoph
A1  - Schmidt, J.
A1  - Rosenkranz, Josef
T1  - Principles of machine noise reduction
T2  - Inter-noise 85 : proceedings ; 1985 international conference on noise control engineering ; Munich, Sept. 18 - 20, 1985. - (Schriftenreihe der Bundesanstalt für Arbeitsschutz : Tagungsbericht ; 39)
Y1  - 1985
SN  - 3-88314-417-7
SP  - 23
EP  - 36
PB  - Bundesanstalt für Arbeitsschutz [u.a.]
CY  - Dortmund [u.a.]
ER  - 
TY  - CHAP
A1  - Peloni, A.
A1  - Ceriotti, M.
A1  - Dachwald, Bernd
T1  - Preliminary trajectory design of a multiple NEO rendezvous mission through solar sailing
T2  - Proceedings of the International Astronautical Congress, IAC, Vol. 8, 2014
Y1  - 2015
SN  - 978-1-63439-986-9
SP  - 5352
EP  - 5366
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Peloni, Alessandro
A1  - Dachwald, Bernd
A1  - Ceriotti, Matteo
T1  - Multiple NEA rendezvous mission: Solar sailing options
T2  - Fourth International Symposium on Solar Sailing
N2  - The scientific interest in near-Earth asteroids (NEAs) and the classification of some of those as potentially hazardous asteroid for the Earth stipulated the interest in NEA exploration. Close-up observations of these objects will increase drastically our knowledge about the overall NEA population. For this reason, a multiple NEA rendezvous mission through solar sailing is investigated, taking advantage of the propellantless nature of this groundbreaking propulsion technology. Considering a spacecraft based on the DLR/ESA Gossamer technology, this work focuses on the search of possible sequences of NEA encounters. The effectiveness of this approach is demonstrated through a number of fully-optimized trajectories. The results show that it is possible to visit five NEAs within 10 years with near-term solar-sail technology. Moreover, a study on a reduced NEA database demonstrates the reliability of the approach used, showing that 58% of the sequences found with an approximated trajectory model can be converted into real solar-sail trajectories. Lastly, this second study shows the effectiveness of the proposed automatic optimization algorithm, which is able to find solutions for a large number of mission scenarios without any input required from the user.
KW  - Multiphase
KW  - Trajectory Optimization
KW  - Automated Optimization
KW  - Gossamer
KW  - Sequence-Search
Y1  - 2017
N1  - Fourth International Symposium on Solar Sailing (ISSS 2017), Kyoto, Japan, 17-20 Jan 2017.
http://www.jsforum.or.jp/ISSS2017/
SP  - 1
EP  - 11
ER  - 
TY  - CHAP
A1  - Penne, Jochen
A1  - Profittlich, Martin
A1  - Ringbeck, Thorsten
A1  - Buxbaum, Bernd
ED  - D, Nicola D'Apuzzo
T1  - Touchless detailed 3D scan of human hand anatomy using time-of-flight cameras
T2  - Proceedings of the International Conference on 3D Body Scanning Technologies : Lugano, Switzerland, 19-20 October 2010
Y1  - 2010
SN  - 978-3-033-02714-5
SP  - 361
EP  - 369
PB  - Hometrica Consulting
CY  - Zürich
ER  - 
TY  - CHAP
A1  - Peters, H.
A1  - Ziemons, Karl
A1  - Dammers, J.
A1  - Müller-Veggian, Mattea
ED  - Nenonen, Jukka
T1  - Continuous head motion detection during MEG measurement using head location coils
T2  - Proceedings of the 12th International Conference on Biomagnetism : August 13 - 17, 2000, Helsinki University of Technology, Espoo, Finland
Y1  - 2001
SN  - 951-22-5401-8
N1  - Biomag <12, 2000, Espoo> ; Teknillinen Korkeakoulu <Helsinki> ; International Conference on Biomagnetism <12, 2000, Espoo>
PB  - Helsinki Univ. of Technology, Laboratory of Biomedical Engineering
CY  - Espoo
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
T1  - Analysis of Big Data Streams to obtain Braking Reliability  Information for Train Protection systems
T2  - Asia-Pacific Conference of the Prognostics and Health Management Society
Y1  - 2017
N1  - Asia-Pacific Conference of the
Prognostics and Health Management Society, Jeju, Korea 2017
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Burnham, Keith J.
T1  - On abstraction and interpretability: a behavioural perspective
T2  - 19th International Conference on Systems Engineering 2008 : ICSENG '08 : 19 - 21 Aug. 2008, University of Nevada, Las Vegas, Nevada
Y1  - 2008
SN  - 978-0-7695-3331-5 ; 978-0-7695-2719-2
SP  - 89
EP  - 94
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Larkowski, Tomasz
A1  - Burnham, Keith J.
T1  - An application of adaptive control in the behavioural framework
T2  - 21st International Conference on Systems Engineering (ICSEng) : 16 - 18 Aug. 2011, Las Vegas, Nevada ; proceedings
Y1  - 2011
SN  - 978-1-4577-1078-0 ; 978-0-7695-4495-3
SP  - 49
EP  - 54
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Larkowski, Tomasz
A1  - Burnham, Keith J.
T1  - An approach to adaptive control in the behavioural framework
T2  - UKACC International Conference on Control 2010 (CONTROL 2010) : Coventry, United Kingdom, 7 - 10 September 2010 ; Vol. 2. (IET seminar digest ; 2010/004)
Y1  - 2010
SN  - 978-1-62748-119-9
SP  - 833
EP  - 838
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Melcher, Karin
A1  - Franzen, Julian
T1  - Rare event simulation to optimise maintenance intervals of safety critical redundant subsystems
T2  - Proceedings of the European Conference of the PHM Society
Y1  - 2018
VL  - 4
IS  - 1
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Moshiri, Amir
A1  - Reich, Alexander
A1  - Gäbel, Markus
T1  - Modelling of the effect of sanding on the wheel-rail adhesion area
T2  - First International Conference on Rail Transportation
Y1  - 2017
N1  - 2017 ICRT;
International Conference on Rail Transportation <1, 2017, Chengdu, China>
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Pichler, Alexander
A1  - George, Alfred
A1  - Seiler, Friedrich
T1  - Model based image processing for flow visualisation : 16th International Conference on Systems Science, Wroclaw, Poland, September 04 - 06, 2007
T2  - PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620
Y1  - 2007
SP  - 1
EP  - 10
PB  - ISL
CY  - Saint Louis, France
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Schmidt, B. D.
A1  - Enning, Manfred
T1  - Towards inclusion of the freight rail  system in the industrial internet of things - Wagon 4.0
T2  - Stephenson  Conference, London, March 2017
Y1  - 2017
N1  - IMechE Stephenson Conference <2017, London, United Kingdom>
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Shahidi, Parham
A1  - Enning, Manfred
T1  - Connected freight rail rolling stock: a modular approach integrating sensors, actors and cyber physical systems for operational advantages and condition based maintenance
T2  - Asia-Pacific Conference of the Prognostics and Health Management Society
Y1  - 2017
N1  - Asia-Pacific Conference of the
Prognostics and Health Management Society, Jeju, Korea 2017
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Vinsonneau, B.
A1  - Burnham, K. J.
T1  - Multiple models for nonlinear systems
T2  - Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]
Y1  - 2006
SN  - 1-84600-013-0
SP  - 347
EP  - 352
ER  - 
TY  - CHAP
A1  - Pfundt, H.
A1  - Vogelsang, D.
A1  - Gerling, Ulrich
T1  - Calculation of the crust profile in aluminium reduction cells by thermal computer modelling
T2  - Light metals 1989 : 118th annual meeting of the Minerals, Metals and Materials Society, Las Vegas, NV, Feb. 27 - Mar. 03. 1989
Y1  - 1988
SP  - 371
EP  - 377
PB  - Minerals, Metals and Materials Soc.
CY  - Warrendale, Pa.
ER  - 
TY  - CHAP
A1  - Pham, Phu Tinh
A1  - Nguyen, Thanh Ngoc
A1  - Staat, Manfred
T1  - FEM based shakedown analysis of hardening structures
T2  - Proceedings International Conference on Advances in Computational Mechanics (ACOME)
Y1  - 2012
N1  - International Conference on Advances in Computational Mechanics (ACOME), August 14-16, 2012, Ho Chi Minh City, Vietnam
SP  - 870
EP  - 882
ER  - 
TY  - CHAP
A1  - Pham, Phu Tinh
A1  - Staat, Manfred
T1  - A simplification for shakedown analysis of hardening structures
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Philipp, Brauner
A1  - Brillowski, Florian Sascha
A1  - Dammers, Hannah
A1  - Königs, Peter
A1  - Kordtomeikel, Frauke Carole
A1  - Petruck, Henning
A1  - Schaar, Anne Kathrin
A1  - Schmitz, Seth
A1  - Steuer-Dankert, Linda
A1  - Mertens, Alexander
A1  - Gries, Thomas
A1  - Leicht-Scholten, Carmen
A1  - Nagel, Saskia K.
A1  - Nitsch, Verena
A1  - Schuh, Günther
A1  - Ziefle, Martina
ED  - Mrugalska, Beata
ED  - Trzcielinski, Stefan
ED  - Karwowski, Waldemar
ED  - Nicolantonio, Massimo Di
ED  - Roossi, Emilio
T1  - A research framework for human aspects in the internet of production: an intra-company perspective
T2  - Advances in Manufacturing, Production Management and Process Control:  Proceedings of the AHFE 2020 Virtual Conferences on Human Aspects of Advanced Manufacturing, Advanced Production Management and Process Control, and Additive Manufacturing, Modeling Systems and 3D Prototyping, July 16–20, 2020, USA
N2  - Digitalization in the production sector aims at transferring concepts and methods from the Internet of Things (IoT) to the industry and is, as a result, currently reshaping the production area. Besides technological progress, changes in work processes and organization are relevant for a successful implementation of the “Internet of Production” (IoP). Focusing on the labor organization and organizational procedures emphasizes to consider intra-company factors such as (user) acceptance, ethical issues, and ergonomics in the context of IoP approaches. In the scope of this paper, a research approach is presented that considers these aspects from an intra-company perspective by conducting studies on the shop floor, control level and management level of companies in the production area. Focused on four central dimensions—governance, organization, capabilities, and interfaces—this contribution presents a research framework that is focused on a systematic integration and consideration of human aspects in the realization of the IoP.
KW  - Human factors
KW  - Digitalization
KW  - Acceptance
KW  - Ethics
KW  - Human-robot collaboration
Y1  - 2020
SN  - 978-3-030-51980-3
U6  - http://dx.doi.org/10.1007/978-3-030-51981-0_1
SP  - 3
EP  - 17
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Pieper, Martin
A1  - Schulz, Silvia
T1  - Teaching Simulation Methods with COMSOL Multiphysics
N2  - This paper describes two courses on
simulation methods for graduate students:
“Simulation Methods” and “Simulation and
Optimization in Virtual Engineering” The
courses were planned to teach young engineers
how to work with simulation software as well as
to understand the necessary mathematical background.
As simulation software COMSOL is
used. The main philosophy was to combine
theory and praxis in a way that motivates the
students. In addition “soft skills” should be
improved. This was achieved by project work as
final examination. As underlying didactical principle
the ideas of Bloom’s revised taxonomy
were followed. The paper basically focusses on
educational aspects, e.g. how to structure the
course, plan the exercises, organize the project
work and include practical COMSOL examples.
KW  - COMSOL Multiphysics
KW  - Optimization module
KW  - LiveLink for MATLAB
KW  - Bloom Taxonomy
KW  - education
Y1  - 2014
ER  - 
TY  - CHAP
A1  - Pietsch, Wolfram
T1  - A framework of quality function deployment
T2  - Quality management / eds.: M. Ross ... (Software quality management ; 3,1)
Y1  - 1995
SN  - 1-85312-309-9
SP  - 419
EP  - 428
PB  - Computational Mechanics Publ.
CY  - Southhampton
ER  - 
TY  - CHAP
A1  - Pietsch, Wolfram
A1  - Herzwurm, Georg
A1  - Zander, Dietmar
T1  - Assuring quality of QFD-education in Germany
T2  - ISQFD'06: 12th International Symposium on QFD : Tokyo, 07.-09.2006
Y1  - 2006
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Pirovano, Laura
A1  - Seefeldt, Patric
A1  - Dachwald, Bernd
A1  - Noomen, Ron
T1  - Attitude and Orbital Dynamics Modeling for an Uncontrolled Solar-Sail Experiment in Low-Earth Orbit
T2  - 25th International Symposium on Spaceflight Dynamics, 2015, Munich, Germany
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Pirovano, Laura
A1  - Seefeldt, Patric
A1  - Dachwald, Bernd
A1  - Noomen, Ron
T1  - Attitude and orbital modeling of an uncontrolled solar-sail experiment in low-Earth orbit
T2  - 25th International Symposium on Space Flight Dynamics ISSFD
N2  - Gossamer-1 is the first project of the three-step Gossamer roadmap, the purpose of which is to develop, prove and demonstrate that solar-sail technology is a safe and reliable propulsion technique for long-lasting and high-energy missions. This paper firstly presents the structural analysis performed on the sail to understand its elastic behavior. The results are then used in attitude and orbital simulations. The model considers the main forces and torques that a satellite experiences in low-Earth orbit coupled with the sail deformation. Doing the simulations for varying initial conditions in attitude and rotation rate, the results show initial states to avoid and maximum rotation rates reached for correct and faulty deployment of the sail. Lastly comparisons with the classic flat sail model are carried out to test the hypothesis that the elastic behavior does play a role in the attitude and orbital behavior of the sail
KW  - Solar sail
KW  - Gossamer structures
KW  - Attitude dynamics
KW  - Orbital dynamics
Y1  - 2015
N1  - 25th International Symposium on Space Flight Dynamics ISSFD
October 19 – 23, 2015, Munich, Germany
https://issfd.org/2015/
SP  - 1
EP  - 15
ER  - 
TY  - CHAP
A1  - Plescher, Engelbert
A1  - Mathiak, Gerhard
A1  - Willnecker, Rainer
T1  - Technical aspects of liquid diffusion model experiments
T2  - 55th International Astronautical Congress : October 4 - 8, 2004, Vancouver, Canada / International Astronautical Federation. Bd. 8. IAC-04-J.5.04
Y1  - 2005
SP  - 5019
EP  - 5025
PB  - International Astronautical Federation
CY  - Paris
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Abouzar, Maryam H.
A1  - Schöning, Michael Josef
ED  - Abdelghani, Adnane
ED  - Schöning, Michael Josef
T1  - (Bio-­)chemical sensor array based on nanoplate SOI capacitors
T2  - Nanoscale Science and Technology (NS&T´12) : Proceedings Book Humboldt Kolleg ; Tunisia, 17-19 March, 2012
Y1  - 2012
SP  - 31
EP  - 31
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Bronder, Thomas
A1  - Scheja, S.
A1  - Wu, Chunsheng
A1  - Metzger-Boddien, C.
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Label-free Electrostatic Detection of DNA Amplification by PCR Using Capacitive Field-effect Devices
T2  - Procedia Engineering
N2  - A capacitive field-effect EIS (electrolyte-insulator-semiconductor) sensor modified with a positively charged weak polyelectrolyte of poly(allylamine hydrochloride) (PAH)/single-stranded probe DNA (ssDNA) bilayer has been used for a label-free electrostatic detection of pathogen-specific DNA amplification via polymerase chain reaction (PCR). The sensor is able to distinguish between positive and negative PCR solutions, to detect the existence of target DNA amplicons in PCR samples and thus, can be used as tool for a quick verification of DNA amplification and the successful PCR process.
Y1  - 2016
U6  - http://dx.doi.org/10.1016/j.proeng.2016.11.512
SN  - 1877-7058
N1  - Proceedings of the 30th anniversary Eurosensors Conference – Eurosensors 2016, 4-7. Sepember 2016, Budapest, Hungary
VL  - Vol. 168
SP  - 514
EP  - 517
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Bronder, Thomas
A1  - Wu, Chunsheng
A1  - Schöning, Michael Josef
T1  - Label-free sensing of biomolecules by their intrinsic molecular charge using field-effect devices
T2  - Semiconductor Micro- and Nanoelectonics : Proceedings of the tenth international conference, Yerevan, Armenia, September 11-13
Y1  - 2015
SN  - 978-5-8084-1991-9
SP  - 61
EP  - 63
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Ingebrandt, S.
A1  - Platen, J.
A1  - Schöning, Michael Josef
T1  - Field-effect sensors with charged macromolecules – from micro towards nano aspects
T2  - Biochemical Sensing Utilisation of Micro-and                       Nanotechnologies, Warschau, Nov. 2005 : Lecture Notes of the                       ICB Seminar / ed.: M. Mascini, W. Torbicz
Y1  - 2006
SP  - 74
EP  - 81
PB  - Polish Academy Sciences Press
CY  - Warsaw
ER  - 
TY  - CHAP
A1  - Pohle-Fröhlich, Regina
A1  - Dalitz, Christoph
A1  - Richter, Charlotte
A1  - Hahnen, Tobias
A1  - Stäudle, Benjamin
A1  - Albracht, Kirsten
T1  - Estimation of muscle fascicle orientation in ultrasonic images
T2  - VISIGRAPP 2020 - Proceedings of the 15th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications, 5
Y1  - 2020
SP  - 79
EP  - 86
ER  - 
TY  - CHAP
A1  - Pomp, Stefan
A1  - Schwarzbözl, Peter
A1  - Koll, Gerrit
A1  - Hennecke, Klaus
A1  - Schmitz, Mark
A1  - Hoffschmidt, Bernhard
T1  - Advanced concept for a solar thermal power plant with open volumetric air receiver
T2  - SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France
Y1  - 2010
SP  - 97
EP  - 98
PB  - Soc. OSC
CY  - Saint Maur
ER  - 
TY  - CHAP
A1  - Poth, Sebastian
A1  - Monzon, Magaly
A1  - Tippkötter, Nils
A1  - Ulber, Roland
T1  - Lignocellulosic biorefinery : process integration of hydrolysis and fermentation
T2  - Proceedings / 11th European Workshop on Lignocellulosics and Pulp : August 16 - 19, 2010, Hamburg, Germany
Y1  - 2010
SP  - 65
EP  - 68
PB  - vTi
CY  - Hamburg
ER  - 
TY  - CHAP
A1  - Pricking, Sebastian
A1  - Gebs, Raphael
A1  - Fleischhaker, Robert
A1  - Kleinbauer, Jochen
A1  - Budnicki, Aleksander
A1  - Sutter, Dirk
A1  - Killi, Alexander
A1  - Weiler, Sascha
A1  - Mielke, M.
A1  - Beaudou, B.
A1  - Debord, B.
A1  - Gerome, F.
A1  - Benabid, F.
ED  - Dorsch, Friedhelm
T1  - Hollow core fiber delivery of sub-ps pulses from a TruMicro 5000 Femto edition thin disk amplifier
T2  - High-power laser materials processing: Lasers, beam delivery, diagnostics, and applications IV : 7 Februar 2015, San Francisco, USA. - (SPIE proceedings series ; 9356)
Y1  - 2015
SN  - 978-162841446-2
U6  - http://dx.doi.org/10.1117/12.2079289
SN  - 0277-786X
SP  - 935602
PB  - SPIE, International Society for Optical Engineering
ER  - 
TY  - CHAP
A1  - Pütz, Sebastian
A1  - Baier, Ralph
A1  - Brauner, Philipp
A1  - Brillowski, Florian
A1  - Dammers, Hannah
A1  - Liehner, Luca
A1  - Mertens, Alexander
A1  - Rodemann, Niklas
A1  - Schneider, Sebastian
A1  - Schollemann, Alexander
A1  - Steuer-Dankert, Linda
A1  - Vervier, Luisa
A1  - Gries, Thomas
A1  - Leicht-Scholten, Carmen
A1  - Nagel, Saskia K.
A1  - Piller, Frank T.
A1  - Schuh, Günther
A1  - Ziefle, Martina
A1  - Nitsch, Verena
T1  - An interdisciplinary view on humane interfaces for digital shadows in the internet of production
T2  - 2022 15th International Conference on Human System Interaction (HSI)
N2  - Digital shadows play a central role for the next generation industrial internet, also known as Internet of Production (IoP). However, prior research has not considered systematically how human actors interact with digital shadows, shaping their potential for success. To address this research gap, we assembled an interdisciplinary team of authors from diverse areas of human-centered research to propose and discuss design and research recommendations for the implementation of industrial user interfaces for digital shadows, as they are currently conceptualized for the IoP. Based on the four use cases of decision support systems, knowledge sharing in global production networks, human-robot collaboration, and monitoring employee workload, we derive recommendations for interface design and enhancing workers’ capabilities. This analysis is extended by introducing requirements from the higher-level perspectives of governance and organization.
KW  - digital twin
KW  - digital shadow
KW  - cyber-physical production system
KW  - human-machine interface
Y1  - 2022
SN  - 978-1-6654-6823-7 (Print)
SN  - 978-1-6654-6822-0 (Online)
U6  - http://dx.doi.org/10.1109/HSI55341.2022.9869467
SN  - 2158-2246 (Print)
SN  - 2158-2254 (Online)
N1  - 15th International Conference on Human System Interaction (HSI), 28-31 July 2022, Melbourne, Australia.
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Quadflieg, Till
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Jockenhövel, Stefan
A1  - Reisgen, Uwe
A1  - Gries, Thomas
ED  - Heslehurst, Rikard Benton
T1  - Shear connectors for hybrid joints of metal and FRP
T2  - Diversity in composites : conference proceedings : Composites Australia and CRC-ACS 2012 conference
Y1  - 2012
SN  - 978-0-9873285-0-2
SP  - [152]
EP  - [160]
PB  - Composites Australia
CY  - Hawthorne
ER  - 
TY  - CHAP
A1  - Quitter, Julius
A1  - Marino, Matthew
A1  - Bauschat, J.-Michael
T1  - Highly Non-Planar Aircraft Configurations: Estimation of Flight Mechanical Derivatives Using Low-Order Methods
T2  - Deutscher Luft- und Raumfahrtkongress 2019, DLRK 2019. Darmstadt, Germany
Y1  - 2019
ER  - 
TY  - CHAP
A1  - Rajan, S.
A1  - Butenweg, Christoph
A1  - Dalguer, L. A.
A1  - An, J. H.
A1  - Renault, P.
A1  - Klinkel, S.
T1  - Fragility curves for a three-storey reinforced concrete test structure of the international benchmark SMART 2013
T2  - 16th World Conference on Earthquake, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017
Y1  - 2017
N1  - Paper No 2119
PB  - Chilean Association on Seismology and Earthquake Engineering (ACHISINA)
ER  - 
TY  - CHAP
A1  - Rajan, Sreelakshmy
A1  - Holtschoppen, B.
A1  - Dalguer, L. A.
A1  - Klinkel, S.
A1  - Butenweg, Christoph
ED  - Sas, P.
T1  - Seismic fragility analysis of a non-conventional reinforced concrete structure considering different uncertainties
T2  - Proceedings of ISMA2016, International Conference on Noise and Vibration Engineering/USD2016, International Conference on Uncertainty in Structural Dynamics, / ISMA 2016, USD 2016
Y1  - 2016
SP  - 4213
EP  - 4225
PB  - KU Leuven
CY  - Leuven
ER  - 
TY  - CHAP
A1  - Rajan, Sreelakshmy
A1  - Kubalski, Thomas
A1  - Altay, Okyay
A1  - Dalguer, Luis A
A1  - Butenweg, Christoph
T1  - Multi-dimensional fragility analysis of a RC building with components using response surface method
T2  - 24th International Conference on Structural Mechanics in Reactor Technology, Busan, Korea, 20-25 August, 2017
N2  - Conventional fragility curves describe the  vulnerability of the  main  structure under  external  hazards. However, in complex structures such as nuclear power plants, the safety or the risk depends also on the components associated with a system. The classical fault tree analysis gives an overall view of the failure and contains several subsystems to the main event, however, the interactions in the subsystems are not well  represented.  In  order  to  represent  the  interaction  of  the  components,  a  method  suggested  by Cimellaro et al. (2006) using multidimensional performance limit state functions to obtain the  system fragility curves is adopted. This approach gives the possibility of deriving the cumulative fragility taking into account the interaction of the response of different components. In this paper, this approach is used to evaluate seismic risk of a representative electrical building infrastructure, including the component, of a nuclear power plant. A simplified model of the structure, with nonlinear material behavior is employed for  the  analysis  in  Abaqus©. The  input  variables  considered  are  the  material parameters,  boundary conditions and the seismic input. The variability of the seismic input is obtained from selected ground motion time histories of  spectrum compatible  synthetic ccelerograms.  Unlike the  usual Monte  Carlo methods used for the probabilistic analysis of the structure, a computationally effective response surface method is used. This method reduces the computational effort of the calculations by reducing the required 
number of samples.
Y1  - 2017
SN  - 9781510856776
SP  - 3126
EP  - 3135
PB  - International Assn for Structural Mechanics in Reactor Technology (IASMiRT)
CY  - Raleigh, USA
ER  - 
TY  - CHAP
A1  - Raman, Aravind Hariharan
A1  - Jung, Alexander
A1  - Horváth, András
A1  - Becker, Nadine
A1  - Staat, Manfred
ED  - Staat, Manfred
ED  - Erni, Daniel
T1  - Modification of a computer model of human stem cell-derived cardiomyocyte electrophysiology based on Patch-Clamp measurements
T2  - 3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen
N2  - Human induced pluripotent stem cells (hiPSCs) have shown to be promising in disease studies and drug screenings [1]. Cardiomyocytes derived from hiPSCs have been extensively investigated using patch-clamping and optical methods to compare their electromechanical behaviour relative to fully matured adult cells. Mathematical models can be used for translating findings on hiPSCCMs to adult cells [2] or to better understand the mechanisms of various ion channels when a drug is applied [3,4]. Paci et al. (2013) [3] developed the first model of hiPSC-CMs, which they later refined based on new data [3]. The model is based on iCells® (Fujifilm Cellular Dynamics, Inc. (FCDI), Madison WI, USA) but major differences among several cell lines and even within a single cell line have been found and motivate an approach for creating sample-specific models. We have developed an optimisation algorithm that parameterises the conductances (in S/F=Siemens/Farad) of the latest Paci et al. model (2018) [5] using current-voltage data obtained in individual patch-clamp experiments derived from an automated patch clamp system (Patchliner, Nanion Technologies GmbH, Munich).
Y1  - 2019
SN  - 978-3-940402-22-6
U6  - http://dx.doi.org/10.17185/duepublico/48750
SP  - 10
EP  - 11
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Raupach, Michael
A1  - Orlowsky, Jeannette
A1  - Büttner, T.
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
ED  - Hegger, Josef
T1  - Epoxy-impregnated textiles in concrete - load bearing capacity and durability
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 77
EP  - 88
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Rausch, Lea
A1  - Friesen, John
A1  - Altherr, Lena
A1  - Pelz, Peter F.
ED  - Kliewer, Natalia
ED  - Ehmke, Jan Fabian
ED  - Borndörfer, Ralf
T1  - Using mixed-integer programming for the optimal design of water supply networks for slums
T2  - Operations Research Proceedings 2017
N2  - The UN sets the goal to ensure access to water and sanitation for all people by 2030. To address this goal, we present a multidisciplinary approach for designing water supply networks for slums in large cities by applying mathematical optimization. The problem is modeled as a mixed-integer linear problem (MILP) aiming to find a network describing the optimal supply infrastructure. To illustrate the approach, we apply it on a small slum cluster in Dhaka, Bangladesh.
Y1  - 2018
SN  - 978-3-319-89919-0 (Print)
SN  - 978-3-319-89920-6 (Online)
U6  - http://dx.doi.org/10.1007/978-3-319-89920-6_68
N1  - International Conference of the German Operations Research Society (GOR), Freie Universiät Berlin, Germany, September 6-8, 2017.
SP  - 509
EP  - 516
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Rausch, Lea
A1  - Leise, Philipp
A1  - Ederer, Thorsten
A1  - Altherr, Lena
A1  - Pelz, Peter F.
ED  - Papadrakakis, M.
ED  - Ppadopoulos, V.
ED  - Stefanou, G.
ED  - Plevris, V.
T1  - A comparison of MILP and MINLP solver performance on the example of a drinking water supply system design problem
T2  - ECCOMAS Congress 2016 VII European Congress on Computational Methods in Applied Sciences and Engineering
N2  - Finding a good system topology with more than a handful of components is a
highly non-trivial task. The system needs to be able to fulfil all expected load cases, but at the
same time the components should interact in an energy-efficient way. An example for a system
design problem is the layout of the drinking water supply of a residential building. It may be
reasonable to choose a design of spatially distributed pumps which are connected by pipes in at
least two dimensions. This leads to a large variety of possible system topologies. To solve such
problems in a reasonable time frame, the nonlinear technical characteristics must be modelled
as simple as possible, while still achieving a sufficiently good representation of reality. The
aim of this paper is to compare the speed and reliability of a selection of leading mathematical
programming solvers on a set of varying model formulations. This gives us empirical evidence
on what combinations of model formulations and solver packages are the means of choice with the current state of the art.
KW  - Technical Operations Research
KW  - Mixed-Integer Nonlinear Optimisation
KW  - Solver Per- formance
KW  - Drinking Water Supply
KW  - System Design Problem
Y1  - 2016
SN  - 978-618-82844-0-1
N1  - ECCOMAS Congress 2016
VII European Congress on Computational Methods in Applied Sciences and Engineering, 5–10 June 2016.Crete Island, Greece
SP  - 8509
EP  - 8527
ER  - 
TY  - CHAP
A1  - Reimer, Lars
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - Analysis of the static and dynamic aero-structural response of an elastic swept wing model by direct aeroelastic simulation
T2  - ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences
Y1  - 2006
SN  - 0-9533991-7-6
SP  - Paper No. 2006-10.3.3
PB  - Optimage
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Reimer, Lars
A1  - Braun, Carsten
A1  - Chen, B.-H.
A1  - Ballmann, Josef
T1  - Computational aeroelastic analysis and design of the HIRENASD wind tunnel wing model and tests
T2  - Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics : June 18 - 21, 2007, Stockholm, Sweden
Y1  - 2007
PB  - KTH
CY  - Stockholm
ER  - 
TY  - CHAP
A1  - Reindl, Lukas
A1  - Butenweg, Christoph
A1  - Kubalski, Thomas
T1  - Numerical simulation of unreinforced masonry walls subject to dynamic out-of-plane loading
T2  - COMPDYN 2011 : ECCOMAS Thematic Conference ; Proceedings of the 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering ; 25-28 May, 2011, Corfu, Greece / Eds.: M. Papadrakakis ...
Y1  - 2011
SN  - 978-960-99994-0-3
SP  - 1
EP  - 10
PB  - National Technical Univ. of Athens
CY  - Athen
ER  -