TY  - CHAP
A1  - Rajan, S.
A1  - Butenweg, Christoph
A1  - Dalguer, L. A.
A1  - An, J. H.
A1  - Renault, P.
A1  - Klinkel, S.
T1  - Fragility curves for a three-storey reinforced concrete test structure of the international benchmark SMART 2013
T2  - 16th World Conference on Earthquake, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017
Y1  - 2017
N1  - Paper No 2119
PB  - Chilean Association on Seismology and Earthquake Engineering (ACHISINA)
ER  - 
TY  - CHAP
A1  - Rajan, Sreelakshmy
A1  - Holtschoppen, B.
A1  - Dalguer, L. A.
A1  - Klinkel, S.
A1  - Butenweg, Christoph
ED  - Sas, P.
T1  - Seismic fragility analysis of a non-conventional reinforced concrete structure considering different uncertainties
T2  - Proceedings of ISMA2016, International Conference on Noise and Vibration Engineering/USD2016, International Conference on Uncertainty in Structural Dynamics, / ISMA 2016, USD 2016
Y1  - 2016
SP  - 4213
EP  - 4225
PB  - KU Leuven
CY  - Leuven
ER  - 
TY  - CHAP
A1  - Rajan, Sreelakshmy
A1  - Kubalski, Thomas
A1  - Altay, Okyay
A1  - Dalguer, Luis A
A1  - Butenweg, Christoph
T1  - Multi-dimensional fragility analysis of a RC building with components using response surface method
T2  - 24th International Conference on Structural Mechanics in Reactor Technology, Busan, Korea, 20-25 August, 2017
N2  - Conventional fragility curves describe the  vulnerability of the  main  structure under  external  hazards. However, in complex structures such as nuclear power plants, the safety or the risk depends also on the components associated with a system. The classical fault tree analysis gives an overall view of the failure and contains several subsystems to the main event, however, the interactions in the subsystems are not well  represented.  In  order  to  represent  the  interaction  of  the  components,  a  method  suggested  by Cimellaro et al. (2006) using multidimensional performance limit state functions to obtain the  system fragility curves is adopted. This approach gives the possibility of deriving the cumulative fragility taking into account the interaction of the response of different components. In this paper, this approach is used to evaluate seismic risk of a representative electrical building infrastructure, including the component, of a nuclear power plant. A simplified model of the structure, with nonlinear material behavior is employed for  the  analysis  in  Abaqus©. The  input  variables  considered  are  the  material parameters,  boundary conditions and the seismic input. The variability of the seismic input is obtained from selected ground motion time histories of  spectrum compatible  synthetic ccelerograms.  Unlike the  usual Monte  Carlo methods used for the probabilistic analysis of the structure, a computationally effective response surface method is used. This method reduces the computational effort of the calculations by reducing the required 
number of samples.
Y1  - 2017
SN  - 9781510856776
SP  - 3126
EP  - 3135
PB  - International Assn for Structural Mechanics in Reactor Technology (IASMiRT)
CY  - Raleigh, USA
ER  - 
TY  - CHAP
A1  - Raman, Aravind Hariharan
A1  - Jung, Alexander
A1  - Horváth, András
A1  - Becker, Nadine
A1  - Staat, Manfred
ED  - Staat, Manfred
ED  - Erni, Daniel
T1  - Modification of a computer model of human stem cell-derived cardiomyocyte electrophysiology based on Patch-Clamp measurements
T2  - 3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen
N2  - Human induced pluripotent stem cells (hiPSCs) have shown to be promising in disease studies and drug screenings [1]. Cardiomyocytes derived from hiPSCs have been extensively investigated using patch-clamping and optical methods to compare their electromechanical behaviour relative to fully matured adult cells. Mathematical models can be used for translating findings on hiPSCCMs to adult cells [2] or to better understand the mechanisms of various ion channels when a drug is applied [3,4]. Paci et al. (2013) [3] developed the first model of hiPSC-CMs, which they later refined based on new data [3]. The model is based on iCells® (Fujifilm Cellular Dynamics, Inc. (FCDI), Madison WI, USA) but major differences among several cell lines and even within a single cell line have been found and motivate an approach for creating sample-specific models. We have developed an optimisation algorithm that parameterises the conductances (in S/F=Siemens/Farad) of the latest Paci et al. model (2018) [5] using current-voltage data obtained in individual patch-clamp experiments derived from an automated patch clamp system (Patchliner, Nanion Technologies GmbH, Munich).
Y1  - 2019
SN  - 978-3-940402-22-6
U6  - http://dx.doi.org/10.17185/duepublico/48750
SP  - 10
EP  - 11
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Raupach, Michael
A1  - Orlowsky, Jeannette
A1  - Büttner, T.
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
ED  - Hegger, Josef
T1  - Epoxy-impregnated textiles in concrete - load bearing capacity and durability
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 77
EP  - 88
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Rausch, Lea
A1  - Friesen, John
A1  - Altherr, Lena
A1  - Pelz, Peter F.
ED  - Kliewer, Natalia
ED  - Ehmke, Jan Fabian
ED  - Borndörfer, Ralf
T1  - Using mixed-integer programming for the optimal design of water supply networks for slums
T2  - Operations Research Proceedings 2017
N2  - The UN sets the goal to ensure access to water and sanitation for all people by 2030. To address this goal, we present a multidisciplinary approach for designing water supply networks for slums in large cities by applying mathematical optimization. The problem is modeled as a mixed-integer linear problem (MILP) aiming to find a network describing the optimal supply infrastructure. To illustrate the approach, we apply it on a small slum cluster in Dhaka, Bangladesh.
Y1  - 2018
SN  - 978-3-319-89919-0 (Print)
SN  - 978-3-319-89920-6 (Online)
U6  - http://dx.doi.org/10.1007/978-3-319-89920-6_68
N1  - International Conference of the German Operations Research Society (GOR), Freie Universiät Berlin, Germany, September 6-8, 2017.
SP  - 509
EP  - 516
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Rausch, Lea
A1  - Leise, Philipp
A1  - Ederer, Thorsten
A1  - Altherr, Lena
A1  - Pelz, Peter F.
ED  - Papadrakakis, M.
ED  - Ppadopoulos, V.
ED  - Stefanou, G.
ED  - Plevris, V.
T1  - A comparison of MILP and MINLP solver performance on the example of a drinking water supply system design problem
T2  - ECCOMAS Congress 2016 VII European Congress on Computational Methods in Applied Sciences and Engineering
N2  - Finding a good system topology with more than a handful of components is a
highly non-trivial task. The system needs to be able to fulfil all expected load cases, but at the
same time the components should interact in an energy-efficient way. An example for a system
design problem is the layout of the drinking water supply of a residential building. It may be
reasonable to choose a design of spatially distributed pumps which are connected by pipes in at
least two dimensions. This leads to a large variety of possible system topologies. To solve such
problems in a reasonable time frame, the nonlinear technical characteristics must be modelled
as simple as possible, while still achieving a sufficiently good representation of reality. The
aim of this paper is to compare the speed and reliability of a selection of leading mathematical
programming solvers on a set of varying model formulations. This gives us empirical evidence
on what combinations of model formulations and solver packages are the means of choice with the current state of the art.
KW  - Technical Operations Research
KW  - Mixed-Integer Nonlinear Optimisation
KW  - Solver Per- formance
KW  - Drinking Water Supply
KW  - System Design Problem
Y1  - 2016
SN  - 978-618-82844-0-1
N1  - ECCOMAS Congress 2016
VII European Congress on Computational Methods in Applied Sciences and Engineering, 5–10 June 2016.Crete Island, Greece
SP  - 8509
EP  - 8527
ER  - 
TY  - CHAP
A1  - Reimer, Lars
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - Analysis of the static and dynamic aero-structural response of an elastic swept wing model by direct aeroelastic simulation
T2  - ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences
Y1  - 2006
SN  - 0-9533991-7-6
SP  - Paper No. 2006-10.3.3
PB  - Optimage
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Reimer, Lars
A1  - Braun, Carsten
A1  - Chen, B.-H.
A1  - Ballmann, Josef
T1  - Computational aeroelastic analysis and design of the HIRENASD wind tunnel wing model and tests
T2  - Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics : June 18 - 21, 2007, Stockholm, Sweden
Y1  - 2007
PB  - KTH
CY  - Stockholm
ER  - 
TY  - CHAP
A1  - Reindl, Lukas
A1  - Butenweg, Christoph
A1  - Kubalski, Thomas
T1  - Numerical simulation of unreinforced masonry walls subject to dynamic out-of-plane loading
T2  - COMPDYN 2011 : ECCOMAS Thematic Conference ; Proceedings of the 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering ; 25-28 May, 2011, Corfu, Greece / Eds.: M. Papadrakakis ...
Y1  - 2011
SN  - 978-960-99994-0-3
SP  - 1
EP  - 10
PB  - National Technical Univ. of Athens
CY  - Athen
ER  - 
TY  - CHAP
A1  - Reindl, Lukas
A1  - Park, Jin
A1  - Norda, Hannah
A1  - Butenweg, Christoph
T1  - Seismic design of masonry walls subject to out-of-plane bending
T2  - Proceedings of the Tenth International Conference on Computational Structures Technology : Valencia, Spain, 14 - 17 September 2010 / organised in association with: Universidad Politecnica de Valencia ... Ed. by B. H. V. Topping ...
Y1  - 2010
SN  - 978-1-905088-36-2
U6  - http://dx.doi.org/10.4203/ccp.93.348
SP  - Paper 348
PB  - Civil-Comp Press
CY  - Kippen
ER  - 
TY  - CHAP
A1  - Reisert, Steffen
A1  - Geissler, H.
A1  - Flörke, R.
A1  - Weiler, C.
A1  - Wagner, P.
A1  - Schöning, Michael Josef
ED  - Abdelghani, Adnane
ED  - Schöning, Michael Josef
T1  - Characterisation of aseptic sterilisation processes using an electronic nose
T2  - Nanoscale Science and Technology (NS&T´12) : Proceedings Book Humboldt Kolleg ; Tunisia, 17-19 March, 2012
Y1  - 2012
SP  - 45
EP  - 45
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Gumenyuk, Amdrej V.
ED  - Turichin, G.
T1  - Measurement method of electron beam plasma parameters by non-vacuum electron beam welding
T2  - Beam technologies & laser application : proceedings of the VI international conference, Saint Petersburg, Sept. 23-25, 2009
Y1  - 2009
SP  - 259
EP  - 267
PB  - Politechnical Univ.
CY  - Saint Petersburg
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Gumenyuk, Andrej
T1  - Application of electron beam welding to fabrication of steel-aluminium dissimilar joint
T2  - Beam technologies & laser application : proceedings of the VII international conference, Saint Petersburg, Sept. 18-21, 2012
Y1  - 2012
SP  - 265
EP  - 279
PB  - Publ. House
CY  - Saint Petersburg
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Turichin, Gleb
A1  - Valdaitseva, Elena
A1  - Bach, Friedrich-Wilhelm
A1  - Hassel, Thomas
A1  - Beniyashi, Alexander
T1  - Investigation of factors for defect-free weld formation by non-vacuum electron beam welding
T2  - Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine
Y1  - 2011
SP  - 104
EP  - 109
PB  - Paton Publ. House
CY  - Kiev
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Scheik, Sven
A1  - Michaeli, Walter
A1  - Grönlund, Oliver
A1  - Neuß, Andreas
A1  - Wunderle, Johannes
A1  - Poprawe, Reinhart
A1  - Rösner, A.
A1  - Bobzin, Kirsten
A1  - Schläfer, Thomas
A1  - Theiß, Sebastian
A1  - Kutschmann, Pia
A1  - Haberstroh, Edmund
A1  - Flock, Dustin
A1  - Bührig-Polaczek, Andreas
A1  - Jakob, M.
ED  - Thoben, Klaus-Dieter
T1  - Novel process chains for the production of plastics/metal-hybrids
T2  - 17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011
Y1  - 2011
SN  - 978-1-457-70772-8 ; 978-3-943024-05-0
SP  - 596
EP  - 604
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Schoene, Jens
A1  - Hegger, Josef
A1  - Gallwoszus, Jörg
A1  - Feldmann, Markus
A1  - Kopp, Maik
A1  - Gündel, Max
ED  - Cairns, John W.
T1  - Investigation on bond mechanisms of innovative small-scale shear connectors between steel and concrete
T2  - Bond in concrete 2012. Vol. 2. Bond in new materials and under severe conditions
Y1  - 2012
SN  - 978-88-907078-3-4
SP  - 893
EP  - 898
PB  - Publisher creations
CY  - Manerbio, Brescia
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Jerabek, Jakub
A1  - Keil, Allessandra
ED  - Brameshuber, Wolfgang
T1  - Theoretical and experimental investigations on textile-reinforced concrete spalling behavior
T2  - Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ;  75)
Y1  - 2010
SN  - 978-2-35158-106-3
SP  - 153
EP  - 162
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Reke, Michael
A1  - Peter, Daniel
A1  - Schulte-Tigges, Joschua
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Walter, Thomas
A1  - Matheis, Dominik
T1  - A Self-Driving Car Architecture in ROS2
T2  - 2020 International SAUPEC/RobMech/PRASA Conference, Cape Town, South Africa
Y1  - 2020
SN  - 978-1-7281-4162-6
U6  - http://dx.doi.org/10.1109/SAUPEC/RobMech/PRASA48453.2020.9041020
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Renault, Philippe
A1  - Butenweg, Christoph
A1  - Mistler, Michael
T1  - Seismic vulnerability assessment system for bridges
T2  - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping
Y1  - 2005
SN  - 1-905088-00-0
SP  - 1
EP  - 14
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Rendon, Carlos
A1  - Dieckmann, Simon
A1  - Weidle, Mathias
A1  - Dersch, Jürgen
A1  - Teixeira Boura, Cristiano José
A1  - Polklas, Thomas
A1  - Kuschel, Marcus
A1  - Herrmann, Ulf
T1  - Retrofitting of existing parabolic trough collector power plants with molten salt tower systems
T2  - AIP Conference Proceedings
Y1  - 2018
U6  - http://dx.doi.org/10.1063/1.5067030
VL  - 2033
IS  - 1
SP  - 030014-1
EP  - 030014-8
ER  - 
TY  - CHAP
A1  - Rendon, Carlos
A1  - Schwager, Christian
A1  - Ghiasi, Mona
A1  - Schmitz, Pascal
A1  - Bohang, Fakhri
A1  - Caminos, Ricardo Alexander Chico
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Modeling and upscaling of a pilot bayonettube reactor for indirect solar mixed methane reforming
T2  - AIP Conference Proceedings
Y1  - 2020
U6  - http://dx.doi.org/10.1063/5.0029974
IS  - 2303
SP  - 170012-1
EP  - 170012-9
ER  - 
TY  - CHAP
A1  - Rens, Gavin
A1  - Ferrein, Alexander
A1  - Poel, Etienne van der
T1  - Extending DTGolog to deal with POMD-Ps
T2  - Proceedings of the Nineteenth Annual Symposium of the Pattern Recognition Association of South Africa (PRASA 2008)
Y1  - 2008
SP  - 49
EP  - 54
ER  - 
TY  - CHAP
A1  - Richter, Charlotte
A1  - Braunstein, Bjoern
A1  - Stäudle, Benjamin
A1  - Attias, Julia
A1  - Suess, Alexander
A1  - Weber, T.
A1  - Rittweger, Joern
A1  - Green, David A.
A1  - Albracht, Kirsten
T1  - In vivo fascicle length of the gastrocnemius muscle during walking in simulated martian gravity using two different body weight support devices
T2  - 23rd Annual Congress of the European College of Sport Science, Dublin, Irland
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Rieper, Harald
A1  - Gebhardt, Andreas
A1  - Stucker, Brent
T1  - Process parameters for Selective Laser Melting of AgCu7
T2  - DDMC, Fraunhofer Direct Digital Manufacturing Conference, 3
Y1  - 2016
SN  - 978-3-8396-1001-5
N1  - DDMC, 2016, Fraunhofer Direct Digital Manufacturing Conference, 3rd, Berlin, DE, 2016-03-16 - 2016-03-17
SP  - 171
EP  - 176
PB  - Fraunhofer-Verlag
CY  - Stuttgart
ER  - 
TY  - CHAP
A1  - Riga, Evi
A1  - Pitilakis, Kyriazis
A1  - Butenweg, Christoph
A1  - Apostolaki, Stefania
A1  - Karatzetzou, Anna
ED  - Arion, Cristian
ED  - Scupin, Alexandra
ED  - Ţigănescu, Alexandru
T1  - Investigating the impact of the new European Seismic Hazard Model ESHM20 on the seismic design and safety control of industrial facilities
T2  - The Third European Conference on Earthquake Engineering and Seismology September 4 – September 9, 2022, Bucharest
N2  - The seismic performance and safety of major European industrial facilities has a global interest for Europe, its citizens and economy. A potential major disaster at an industrial site could affect several countries, probably far beyond the country where it is located. However, the seismic design and safety assessment of these facilities is practically based on national, often outdated seismic hazard assessment studies, due to many reasons, including the absence of a reliable, commonly developed seismic hazard model for whole Europe. This important gap is no more existing, as the 2020 European Seismic Hazard Model ESHM20 was released in December 2021. In this paper we investigate the expected impact of the adoption of ESHM20 on the seismic demand for industrial facilities, through the comparison of the ESHM20 probabilistic hazard at the sites where industrial facilities are located with the respective national and European regulations. The goal of this preliminary work in the framework of Working Group 13 of the European Association for Earthquake Engineering (EAEE), is to identify potential inadequacies in the design and safety control of existing industrial facilities and to highlight the expected impact of the adoption of the new European Seismic Hazard Model on the design of new industrial facilities and the safety assessment of existing ones.
KW  - ESHM20, industrial facilities
KW  - seismic hazard
KW  - seismic design
KW  - safety control
Y1  - 2022
SN  - 978-973-100-533-1
SP  - 3261
EP  - 3270
ER  - 
TY  - CHAP
A1  - Ringbeck, Thorsten
A1  - Albrecht, M.
A1  - Frey, J.
A1  - [u.a.], 
ED  - Lerch, Reinhard
T1  - Time-of-Flight 3D-camera for autonomous navigation and industrial automation
T2  - Proceedings : 11th international conference, 13 - 15 May 2003, Exhibition Centre Nuremberg, Germany ; an event of the Association for Sensor Technology, AMA
Y1  - 2003
N1  - Internationale Messe mit Kongress Sensor <Nürnberg>
PB  - AMA Service
CY  - Wunstorf/Germany
ET  - CD-ROM-Ausg.
ER  - 
TY  - CHAP
A1  - Ringbeck, Thorsten
A1  - Buxbaum, Bernd
T1  - A highly integrated monolithic electro-optical PLL in CMOS-technology (PMD-PLL) for communication and ranging systems
T2  - Proceedings / OPTO 2000, 4th International Conference and Exhibition on Optoelectronics, Optical Sensors and Measuring Techniques : May 9 - 11, 2000, Erfurt Fair, Conference Centre
Y1  - 2000
N1  - International Congress and Exhibition on Optoelectronics, Optical Sensors and Measuring Techniques <4, 2000, Erfurt> ; OPTO <4, 2000, Erfurt>
SP  - 235
EP  - 239
PB  - AMA Service GmbH
CY  - Wunsdorf
ER  - 
TY  - CHAP
A1  - Ringbeck, Thorsten
A1  - Hagebeuker, Bianca
ED  - Grün, Armin
T1  - A 3D time of flight camera of object detection
T2  - Optical 3-D measurement techniques VIII : applications in GIS, mapping, manufacturing, quality control, robotics, navigation, mobile mapping, medical imaging, cultural heritage, VR generation and animation; papers presented to the conference organized at ETH Zurich, Switzerland, July 9 - 12, 2007. - Vol. 1
Y1  - 2007
SN  - 3-906467-67-8 (Gesamtwerk)
N1  - Conference on Optical 3-D Measurement Techniques <8, 2007, Zürich>
SP  - 1
EP  - 16
PB  - ETH
CY  - Zürich
ER  - 
TY  - CHAP
A1  - Ringbeck, Thorsten
A1  - Schwarte, Rudolf
A1  - Buxbaum, Bernd
ED  - Korevaar, Eric John
T1  - Introduction of a new opto-electrical phase-locked loop in CMOS technology: the PMD-PLL
T2  - Optical wireless communications II / [SPIE Conference on Optical Wireless Communications II], 22 September 1999, Boston, Massachusetts. - (SPIE proceedings series ; 3850)
Y1  - 1999
SN  - 0-8194-3443-4
SN  - 0038-7355
SN  - 0361-0748
SN  - 0277-786X
N1  - Conference on Optical Wireless Communications <2, 1999, Boston, Mass.
SP  - 108
EP  - 116
PB  - SPIE
CY  - Bellingham, Wash.
ER  - 
TY  - CHAP
A1  - Ringbeck, Thorsten
A1  - Schwarte, Rudolf
A1  - Buxbaum, Bernd
A1  - Hess, Rudolf
ED  - Tang, Suning
T1  - Optical GMSK modem for infrared wireless communication based on a new receiver principle in CMOS technology
T2  - Optoelectronic interconnects VIII : 25 - 26 January 2001, San Jose, USA. - (Proceedings of SPIE ; 4292)
Y1  - 2001
SN  - 0-8194-3970-3
SN  - 0038-7355
SN  - 0361-0748
SN  - 0277-786X
N1  - Optoelectronic Interconnects <8, 2001, San Jose, Calif.>
SP  - 25
EP  - 34
PB  - SPIE
CY  - Bellingham, Wash.
ER  - 
TY  - CHAP
A1  - Rings, René
A1  - Ludowicy, Jonas
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Sensitivity Analysis of General Aviation Aircraft with Parallel Hybrid-Electric Propulsion Systems
T2  - Asia Pacific International Symposium on Aerospace Technology. APISAT 2019
Y1  - 2019
ER  - 
TY  - CHAP
A1  - Ritschel, Konstantin
A1  - Stenzel, Adina
A1  - Czarnecki, Christian
A1  - Hong, Chin-Gi
ED  - Gesellschaft für Informatik e.V. (GI), 
T1  - Realizing robotic process automation potentials: an architectural perspective on a real-life implementation case
T2  - GI Edition Proceedings Band 314 "INFORMATIK 2021" Computer Science & Sustainability
N2  - The initial idea of Robotic Process Automation (RPA) is the automation of business processes through a simple emulation of user input and output by software robots. Hence, it can be assumed that no changes of the used software systems and existing Enterprise Architecture (EA) is
required. In this short, practical paper we discuss this assumption based on a real-life implementation project. We show that a successful RPA implementation might require architectural work during analysis, implementation, and migration. As practical paper we focus on exemplary lessons-learned and new questions related to RPA and EA.
KW  - Robotic Process Automation
KW  - Enterprise Architecture
KW  - Implementation Case
Y1  - 2021
SN  - 9783885797081
SN  - 1617-5468
N1  - INFORMATIK 2021 – 51. Jahrestagung der Gesellschaft für Informatik, 27. September – 01. Oktober 2021 / Virtuell, Berlin.
https://informatik2021.gi.de/
SP  - 1303
EP  - 1311
PB  - Köllen
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
T1  - DISMED - an innovation portal for printing and media industry
T2  - CRIS 2000 : the fifth conference on Current Research Information Systems in Europe, in Helsinki (Finland), 25-27 May 2000
Y1  - 2001
N1  - Programmpunkt: Cybercafé.
PB  - CORDIS Archive
CY  - [s.l.]
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
T1  - Production and distribution of personalized information services employing mass customization
T2  - 2nd Interdisciplinary World Congress on Mass Customization and Personalization : MCPC'03, October 6 - 8, 2003, Technische Universität München, Munic, Germany
Y1  - 2003
SP  - Part IV
PB  - Techn. Univ. (TUM)
CY  - München
ET  - CD-Ausg.
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
T1  - Personalized information services : an electronic information commodity and its production
T2  - Electronic publishing '01 : 2001 in the digital publishing odyssey ; proceedings of an ICCC/IFIP conference held at the University of Kent at Canterbury, Kent, United Kingdom, 5 - 7 July, 2001 ; [proceedings of the Fifth Conference on Electronic Publishing]
Y1  - 2001
SN  - 1-58603-191-0
SP  - 48
EP  - 58
PB  - IOS Press [u.a.]
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
A1  - Izquierdo Tello, César
A1  - Damm, Sebastian
T1  - Connecting a pedelec to the cloud as basis for gamification in multi modal mobility planning
T2  - MobileCloud 2014 : 2nd IEEE International Conference on Mobile Cloud Computing, Services, and Engineering Oxford, United Kingdom 7-10 April 2014
Y1  - 2014
SN  - 978-1-4799-2504-9
U6  - http://dx.doi.org/10.1109/MobileCloud.2014.25
SP  - 101
EP  - 108
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Rochefort, E. de
A1  - Verver, M.
A1  - Grunendahl, A.
A1  - Mooi, H.
A1  - Butenweg, Christoph
T1  - Detailed modelling of the lumbar spine for investigation of low back pain
T2  - Digital Human Modeling for Design and Engineering Symposium : Iowa City, Iowa June 14-16, 2005. (SAE technical papers series ; 2005-1-2716)
Y1  - 2005
U6  - http://dx.doi.org/10.4271/2005-01-2716
SN  - 0096-736X
SP  - 1
EP  - 11
PB  - SAE International
CY  - Warrendale, Pa.
ER  - 
TY  - CHAP
A1  - Rokitansky, Carl-Herbert
A1  - Ehammer, Max
A1  - Gräupl, Thomas
A1  - Schnell, Michael
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
A1  - Rihacek, Christoph
A1  - Sajatovic, Miodrag
T1  - B-AMC a system for future broadband aeronautical multi-carrier communications in the L-BAND
T2  - IEEE/AIAA 26th Digital Avionics Systems Conference ; DASC '07 ; 21 - 25 Oct. 2007, Dallas, Texas
Y1  - 2007
SN  - 978-1-4244-1108-5
SP  - 4D2-1
EP  - 4D2-13
ER  - 
TY  - CHAP
A1  - Rokitansky, Carl-Herbert
A1  - Ehammer, Max
A1  - Gräupl, Thomas
A1  - Schnell, Michael
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
A1  - Rihacek, Christoph
A1  - Sajatovic, Miodrag
T1  - B-AMC – Aeronautical Broadband Communication in the L-Band
T2  - First CEAS European Air and Space Conference : Motto: century perspectives : Deutscher Luft-und Raumfahrtkongress 2007 : 10-13 September 2007 in Berlin, Germany. (Jahrbuch der Deutschen Gesellschaft für Luft- und Raumfahrt 2007 ; Bd. 1-5. - Enth.: Jahrbuch der Deutschen Gesellschaft für Luft- und Raumfahrt 2006 ; Bd. 3)
Y1  - 2007
SN  - 0070-4083
SP  - 487
EP  - 496
PB  - Deutschen Gesellschaft für Luft- und Raumfahrt
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Roosen, Petra
A1  - Feyerl, Günter
T1  - Gender-specific perception and utilization of personal use vehicles
T2  - FISITA World Automotive Congress 2014 : Maastricht, The Netherlands, 2 - 6 June / [organised by the International Federation of Automotive Engineering Societies (FISITA) ...]. Bd. 1
Y1  - 2015
SN  - 978-1-5108-0209-4
SP  - 418
EP  - 425
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Rosemann, Michael
A1  - Eggert, Mathias
A1  - Voigt, Matthias
A1  - Beverungen, Daniel
T1  - Leveraging Social Network Data for Analytical CRM Strategies - The Introduction of Social BI.
T2  - ECIS 2012 Proceedings
Y1  - 2012
N1  - European Conference on Information Systems
(ECIS), 2012
ER  - 
TY  - CHAP
A1  - Rosin, J.
A1  - Mykoniou, K.
A1  - Butenweg, Christoph
T1  - Analysis Of Base Isolated Liquid Storage Tanks With 3D Fsi-Analysis As Well As Simplified Approaches
T2  - 16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017
N2  - Tanks are preferably designed, for cost-saving reasons, as circular, cylindrical, thin-walled shells. In case of seismic excitation, these constructions are highly vulnerable to stability failures. An earthquake-resistant design of rigidly supported tanks for high seismic loading demands, however, uneconomic wall thicknesses. A cost-effective alternative can be provided by base isolation systems. In this paper, a simplified seismic design procedure for base isolated tanks is introduced, by appropriately modifying the standard mechanical model for flexible, rigidly supported tanks. The non-linear behavior of conventional base isolation systems becomes an integral part of a proposed simplified process, which enables
the assessment of the reduced hydrodynamic forces acting on the tank walls and the corresponding stress distribution. The impulsive and convective actions of the liquid are taken into account. The validity of this approach is evaluated by
employing a non-linear fluid-structure interaction algorithm of finite element method. Special focus is placed on the boundary conditions imposed from the base isolation and the resulting hydrodynamic pressures. Both horizontal and vertical
component of ground motion are considered in order to study the principal effects of the base isolation on the pressure distribution of the tank walls. The induced rocking effects associated with elastomeric bearings are discussed. The results
manifest that base isolated tanks can be designed for seismic loads by means of the proposed procedure with sufficient accuracy, allowing to dispense with numerically expensive techniques.
KW  - liquid storage tank
KW  - seismic isolation
KW  - elastomeric bearing
KW  - friction pendulum bearing
KW  - simplified approach
Y1  - 2017
N1  - Paper No 2246
SP  - 1
EP  - 14
PB  - Chilean Association on Seismology and Earthquake Engineering (ACHISINA)
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Butenweg, Christoph
T1  - Seismic isolation of cylindrical liquid storage tanks
T2  - Proceedings of the 9th European Conference on Structural Dynamics, EURODYN 2014 Porto, Portugal, 30 June - 2 July 2014 / A. Cunha, E. Caetano, .... (eds.)
Y1  - 2014
SN  - 978-972-752-165-4
SP  - 3145
EP  - 3152
CY  - Porto
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Butenweg, Christoph
A1  - Boesen, Niklas
A1  - Gellert, Christoph
T1  - Evaluation of the Seismic Behavior of a Modern URM Building During the 2012 Northern Italy Earthquakes
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Henneböhl, Benedickt
A1  - Butenweg, Christoph
T1  - Global buckling analysis of cylindrical liquid storage tanks under earthquake loading
T2  - 2nd European Conference on Earthquake Engineering and Seismology 2014 (2nd ECEES) : joint event of the 15th European Conference on Earthquake Engineering and the 34th General Assembly of the European Seismological Commission : Istanbul, Turkey, 25-29 August 2014 / European Association for Earthquake Engineering (EAEE) ; Vol. 6
Y1  - 2014
SN  - 978-1-5108-1021-1
SP  - 5270
EP  - 5281
PB  - Curran Associates, Inc.
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Kubalski, Thomas
A1  - Butenweg, Christoph
T1  - Seismic Design of cylindrical liquid storage tanks
T2  - Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed.
Y1  - 2014
SN  - 978-3-658-02810-7 (E-Book) ; 978-3-658-02809-1 (Print)
U6  - http://dx.doi.org/10.1007/978-3-658-02810-7_36
SP  - 429
EP  - 440
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Kubalski, Thomas
A1  - Butenweg, Christoph
ED  - Klinkel, Sven
ED  - Butenweg, Christoph
ED  - Lin, Gao
ED  - Holtschoppen, Britta
T1  - Seismic isolation of cylindrical liquid storage tanks
T2  - Seismic design of industrial facilities
N2  - Seismic excited liquid filled tanks are subjected to extreme loading due to hydrodynamic pressures, which can lead to nonlinear stability failure of the thinwalled cylindrical tanks, as it is known from past earthquakes. A significant reduction of the seismically induced loads can be obtained by the application of base isolation systems, which have to be designed carefully with respect to the modified hydrodynamic behaviour of the tank in interaction with the liquid. For this reason a highly sophisticated fluid-structure interaction model has to be applied for a realistic simulation of the overall dynamic system. In the following, such a model is presented and compared with the results of simplified mathematical models for rigidly supported tanks. Finally, it is examined to what extent a simple mechanical model can represent the behaviour of a base isolated tank in case of seismic excitation
Y1  - 2013
SN  - 978-3-658-02810-7
SN  - 978-3-658-02809-1
SN  - 978-3-658-14037-3
U6  - http://dx.doi.org/10.1007/978-3-658-02810-7_36
N1  - International Conference on Seismic Design of Industrial Facilities, Aachen, Germany, 26.-27.09.2013.
https://sedif-conference.jimdofree.com/
SP  - 429
EP  - 440
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Roth, J.
A1  - Möhring, S.
A1  - Tippkötter, Nils
T1  - Characterization and evaluation of lignocellulosic biomass 130 hydrolysates for ABE fermentation
T2  - New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany
Y1  - 2016
SP  - 130
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - CHAP
A1  - Rousseau, Alain
A1  - Kern, Alexander
T1  - How to deal with environmental risk in IEC 62305-2
T2  - 2014 International Conference on Lightning Protection (ICLP), Shanghai, China
N2  - The 2nd edition of the lightning risk management
standard (IEC 62305-2) considers structures, which may
endanger environment. In these cases, the loss is not limited to
the structure itself, which is valid for usual structures. In the past
(Edition 1) this danger was simply taken into account by a special
hazard factor, multiplying the existing risk for the structure with
a number. Now, in the edition 2, we add to the risk for the
structure itself a “second risk” due to the losses outside the
structure. The losses outside can be treated independently from
what occurs inside. This is a major advantage to analyze the risk
for sensitive structures, like chemical plants, nuclear plants, or
structures containing explosives, etc. In this paper, the existing
procedure given by the European version EN 62305-2 Ed.2 is
further developed and applied to a few structures.
Y1  - 2014
SP  - 521
EP  - 527
ER  - 
TY  - CHAP
A1  - Rütters, René
A1  - Weinheimer, Marius
A1  - Bragard, Michael
T1  - Teaching Control Theory with a Simplified Helicopter Model and a Classroom Fitting Hardware Test-Bench
T2  - 2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)
Y1  - 2018
SN  - 978-1-5386-6903-7
U6  - http://dx.doi.org/10.1109/RTUCON.2018.8659871
ER  - 
TY  - CHAP
A1  - Sadeghfam, Arash
A1  - Sadeghi-Ahangar, A.
A1  - Elgamal, Abdelrahman
A1  - Heuermann, Holger
T1  - Design and Development of a Novel Self-Igniting Microwave Plasma Jet for Industrial Applications
T2  - IEEE MTT-S International Microwave Symposium Digest
Y1  - 2019
SN  - 978-172811309-8
SP  - 63
EP  - 66
ER  - 
TY  - CHAP
A1  - Sajatovic, Miodrag
A1  - Rihacek, Christoph
A1  - Haindl, Bernhard
A1  - Schnell, Michael
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
T1  - Broadband VHF (B-VHF) project achievements and follow-on activities
T2  - Integrated Communications, Navigation and Surveillance Conference : Herndon, VA, 1 - 3 May 2007
Y1  - 2007
SN  - 1-4244-1216-1
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Sattler, Johannes Christoph
A1  - Atti, Vikrama
A1  - Alexopoulos, Spiros
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
A1  - Dutta, Siddharth
A1  - Kioutsioukis, Ioannis
T1  - DNI forecast tool for the smart operation of a parabolic trough collector system with concrete thermal energy storage: Theory, results and outlook
T2  - SolarPACES conference proceedings
N2  - This work presents a basic forecast tool for predicting direct normal irradiance (DNI) in hourly resolution, which the Solar-Institut Jülich (SIJ) is developing within a research project. The DNI forecast data shall be used for a parabolic trough collector (PTC) system with a concrete thermal energy storage (C-TES) located at the company KEAN Soft Drinks Ltd in Limassol, Cyprus. On a daily basis, 24-hour DNI prediction data in hourly resolution shall be automatically produced using free or very low-cost weather forecast data as input. The purpose of the DNI forecast tool is to automatically transfer the DNI forecast data on a daily basis to a main control unit (MCU). The MCU automatically makes a smart decision on the operation mode of the PTC system such as steam production mode and/or C-TES charging mode. The DNI forecast tool was evaluated using historical data of measured DNI from an on-site weather station, which was compared to the DNI forecast data. The DNI forecast tool was tested using data from 56 days between January and March 2022, which included days with a strong variation in DNI due to cloud passages. For the evaluation of the DNI forecast reliability, three categories were created and the forecast data was sorted accordingly. The result was that the DNI forecast tool has a reliability of 71.4 % based on the tested days. The result fulfils SIJ’s aim to achieve a reliability of around 70 %, but SIJ aims to still improve the DNI forecast quality.
KW  - Direct normal irradiance forecast
KW  - DNI forecast
KW  - Parabolic trough collector
KW  - PTC
KW  - Thermal Energy Storage
Y1  - 2024
U6  - http://dx.doi.org/10.52825/solarpaces.v1i.731
SN  - 2751-9899 (online)
N1  - 28th International Conference on Concentrating Solar Power and Chemical Energy Systems, 27-30 September, Albuquerque, NM, USA
IS  - VOL. 1
PB  - TIB Open Publishing
CY  - Hannover
ER  - 
TY  - CHAP
A1  - Sattler, Johannes Christoph
A1  - Schneider, Iesse Peer
A1  - Angele, Florian
A1  - Atti, Vikrama
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Development of heliostat field calibration methods: Theory and experimental test results
T2  - SolarPACES conference proceedings
N2  - In this work, three patent pending calibration methods for heliostat fields of central receiver systems (CRS) developed by the Solar-Institut Jülich (SIJ) of the FH Aachen University of Applied Sciences are presented. The calibration methods can either operate in a combined mode or in stand-alone mode. The first calibration method, method A, foresees that a camera matrix is placed into the receiver plane where it is subjected to concentrated solar irradiance during a measurement process. The second calibration method, method B, uses an unmanned aerial vehicle (UAV) such as a quadrocopter to automatically fly into the reflected solar irradiance cross-section of one or more heliostats (two variants of method B were tested). The third calibration method, method C, foresees a stereo central camera or multiple stereo cameras installed e.g. on the solar tower whereby the orientations of the heliostats are calculated from the location detection of spherical red markers attached to the heliostats. The most accurate method is method A which has a mean accuracy of 0.17 mrad. The mean accuracy of method B variant 1 is 1.36 mrad and of variant 2 is 1.73 mrad. Method C has a mean accuracy of 15.07 mrad. For method B there is great potential regarding improving the measurement accuracy. For method C the collected data was not sufficient for determining whether or not there is potential for improving the accuracy.
KW  - Heliostat Field Calibration
KW  - Unmanned aerial vehicle
KW  - UAV
KW  - Quadrocopter
KW  - Camera system
Y1  - 2024
U6  - http://dx.doi.org/10.52825/solarpaces.v1i.678
SN  - 2751-9899 (online)
N1  - 28th International Conference on Concentrating Solar Power and Chemical Energy Systems, 27-30 September, Albuquerque, NM, USA
IS  - Vol. 1
PB  - TIB Open Publishing
CY  - Hannover
ER  - 
TY  - CHAP
A1  - Sattler, Johannes, Christoph
A1  - Alexopoulos, Spiros
A1  - Caminos, Ricardo Alexander Chico
A1  - Mitchell, John C.
A1  - Ruiz, Victor C.
A1  - Kalogirou, Soteris
A1  - Ktistis, Panayiotis K.
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Dynamic simulation model of a parabolic trough collector system with concrete thermal energy storage for process steam generation
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - http://dx.doi.org/10.1063/1.5117663
SN  - 0094243X
VL  - 2126
SP  - 150007-1
EP  - 150007-8
ER  - 
TY  - CHAP
A1  - Sattler, Johannes, Christoph
A1  - Caminos, Ricardo Alexander Chico
A1  - Ürlings, Nicolas
A1  - Dutta, Siddharth
A1  - Ruiz, Victor
A1  - Kalogirou, Soteris
A1  - Ktistis, Panayiotis
A1  - Agathokleous, Rafaela
A1  - Jung, Christian
A1  - Alexopoulos, Spiros
A1  - Atti, Vikrama Nagababu
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Operational experience and behaviour of a parabolic trough collector system with concrete thermal energy storage for process steam generation in Cyprus
T2  - AIP Conference Proceedings
Y1  - 2020
U6  - http://dx.doi.org/10.1063/5.0029278
IS  - 2303
SP  - 140004-1
EP  - 140004-10
ER  - 
TY  - CHAP
A1  - Sauerborn, Markus
T1  - Investigations to the influence of clouds and aerosols to the haze of the sunshape
T2  - SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain
Y1  - 2011
CY  - Granada
ER  - 
TY  - CHAP
A1  - Sauerborn, Markus
A1  - Arshadi, S.
A1  - Rohrmoser, R.
T1  - Influence of clouds and aerosols to the haze of the sunshape
T2  - 30th ISES Biennial Solar World Congress 2011 : Kassel, Germany, 28 August - 2 September 2011. Vol. 5
Y1  - 2012
SP  - 3887
EP  - 3894
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Sauerborn, Markus
A1  - Hoffschmidt, Bernhard
A1  - Telle, R.
A1  - Wagner, M.
T1  - Heatable optical analyse system for high temperature absorbers
T2  - 30th ISES Biennial Solar World Congress 2011 : : Kassel, Germany, 28 August - 2 September 2011. Vol. 5
Y1  - 2012
SN  - 978-1-61839-364-7
SP  - 3852
EP  - 3860
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Sauerborn, Markus
A1  - Klimek, J.
A1  - Hoffschmidt, Bernhard
A1  - Essen, H.
A1  - Sieger, S.
A1  - Biegel, G.
A1  - Göttsche, Joachim
A1  - Hilger, Patrick
T1  - Eurosun 2012 : radar technology for heliostat posititon control
T2  - Eurosun 2012 : Solar energy for a brighter future : conference proceedings : Rijeka, 18.-22.09.2012
Y1  - 2012
SP  - ID 80
CY  - Rijeka
ER  - 
TY  - CHAP
A1  - Sauerborn, Markus
A1  - Liebenstund, Lena
A1  - Raue, Markus
A1  - Mang, Thomas
A1  - Herrmann, Ulf
A1  - Dueing, Andreas
T1  - Analytic method for material aging and quality analyzing to forecast long time stability of plastic micro heliostat components
T2  - AIP Conference Proceedings
Y1  - 2017
U6  - http://dx.doi.org/10.1063/1.4984388
VL  - 1850
IS  - 1
SP  - 030045-1
EP  - 030045-8
ER  - 
TY  - CHAP
A1  - Savitskaya, Irina S.
A1  - Kistaubayeva, Aida S.
A1  - Akimbekov, Nuraly S.
A1  - Digel, Ilya
A1  - Zhubanova, Azhar A.
T1  - Performance of Bio-Composite Carbonized Materials in Probiotic Applications
T2  - World Academy of Science, Engineering and Technology International Journal of Biotechnology and Bioengineering
Y1  - 2013
VL  - 7
IS  - 7
SP  - 685
EP  - 689
ER  - 
TY  - CHAP
A1  - Schartner, Karl-Heinz
A1  - Loeb, H. W.
A1  - Dachwald, Bernd
A1  - Ohndorf, Andreas
T1  - Perspectives of electric propulsion for outer planetary and deep space missions
T2  - European Planetary Science Congress 2009
N2  - Solar-electric propulsion (SEP) is superior with
respect to payload capacity, flight time and
flexible launch window to the conventional
interplanetary transfer method using chemical
propulsion combined with gravity assists. This fact
results from the large exhaust velocities of electric
low–thrust propulsion and is favourable also for
missions to the giant planets, Kuiper-belt objects
and even for a heliopause probe (IHP) as shown in
three studies by the authors funded by DLR. They
dealt with a lander for Europa and a sample return
mission from a mainbelt asteroid [1], with the
TANDEM mission [2]; the third recent one
investigates electric propulsion for the transfer to
the edge of the solar system.
All studies are based on triple-junction solar arrays,
on rf-ion thrusters of the qualified RIT-22 type and
they use the intelligent trajectory optimization
program InTrance [3].
Y1  - 2009
N1  - European Planetary Science Congress 2009, 13-18 September, Potsdam, Germany
SP  - 416
EP  - 416
ER  - 
TY  - CHAP
A1  - Schiffer, Fabian
A1  - Bragard, Michael
T1  - Cascaded LQ and Field-Oriented Control of a Mobile Inverse Pendulum (Segway) with Permanent Magnet Synchronous Machines
T2  - 2019 20th International Conference on Research and Education in Mechatronics (REM)
Y1  - 2019
SN  - 978-1-5386-9257-8
U6  - http://dx.doi.org/10.1109/REM.2019.8744101
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - Decision-Theoretic Planning with Linguistic Terms in Golog
T2  - FLinAl 2015 - Fuzzy Logic in Artificial Intelligence : Proceedings of the Workshop on Fuzzy Logic in AI (FLinAI-15) co-located with the 24th International Joint Conference on Artificial Intelligence (IJCAI 2015) Buenos Aires, Argentina, July 25, 2015.
Y1  - 2015
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0074-1424-4
SN  - 1613-0073
ER  - 
TY  - CHAP
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - A System Layout for Cognitive Service Robots
T2  - Cognitive Robot Architectures. Proceedings of EUCognition 2016
Y1  - 2017
SN  - 1613-0073
N1  - CEUR-WS Vol-1855
SP  - 44
EP  - 45
ER  - 
TY  - CHAP
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
T1  - Fuzzy representations and control for domestic service robots in Golog
T2  - Intelligent robotics and applications : 4th International conference, ICIRA 2011, Aachen, Germany, December 6-8, 2011, proceedings, part I. (Lecture notes in computer science ; 7102)
Y1  - 2011
SN  - 978-3-642-25486-4
SP  - 241
EP  - 250
ER  - 
TY  - CHAP
A1  - Schildt, P.
A1  - Braun, Carsten
A1  - Marcocca, P.
T1  - Flight testing the extra 330LE flying testbed
T2  - 48th Annual International Symposium of the Society of Flight Test Engineers 2017
Y1  - 2017
SN  - 978-151085387-4
N1  - 48th Annual International Symposium of the Society of Flight Test Engineers 2017, SFTE 2017; Destin; United States; 30 October 2017 through 2 November 2017
SP  - 349
EP  - 362
ER  - 
TY  - CHAP
A1  - Schildt, Philipp
A1  - Marzocca, Pier
A1  - Braun, Carsten
A1  - Dahmann, Peter
A1  - Keimer, Jona
T1  - Effects of atmospheric excitation on vibration based condition monitoring methods for hybrid-electric aircraft propulsion systems
T2  - AIAC 2018: 18th Australian International Aerospace Congress: HUMS - 11th Defence Science and Technology (DST) International Conference on Health and Usage Monitoring (HUMS 2019): ISSFD - 27th International Symposium on Space Flight Dynamics (ISSFD)
Y1  - 2019
SN  - 9781925627213
SP  - 923
EP  - 928
ER  - 
TY  - CHAP
A1  - Schirra, Julian
A1  - Bauschat, J.-Michael
A1  - Watmuff, J.H.
T1  - Accurate induced drag prediction for highly non-planar lifting systems
T2  - 19th Australasian Fluid Mechanics Conference : 8.-11. Dezember 2014, Melbourne, Australia
N2  - The impact of wake model effects is investigated for two highly
non-planar lifting systems. Dependent on the geometrical
arrangement of the configuration, the wake model shape is found
to considerably affect the estimation. Particularly at higher angles
of attack, an accurate estimation based on the common linear wake
model approaches is involved.
Y1  - 2014
ER  - 
TY  - CHAP
A1  - Schirra, Julian
A1  - J., Watmuff
T1  - Euler-based induced drag estimation for highly non-planar lifting systems during conceptional design
T2  - 62. Deutscher Luft- und Raumfahrtkongress 2013 : 10. - 12. September 2032, Stuttgart, Haus der Wirtschaft
Y1  - 2013
SP  - 1
EP  - 8
PB  - Dt. Gesellschaft für Luft- und Raumfahrt
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Schirra, Julian
A1  - Watmuff, Jon
A1  - Bauschat, J.-Michael
T1  - A relative assessment of existing potential-methodologies to accurately estimate the induced drag of highly non-planar lifting systems
T2  - Advanced aero concepts, design and operations : Applied Aerodynamics Conference  : July 22 -24, 2014, Bristol, UK
Y1  - 2014
SP  - 1
EP  - 13
ER  - 
TY  - CHAP
A1  - Schlemmer, Katharina
A1  - Porst, Dariusz
A1  - Bassam, Rasha
A1  - Artmann, Gerhard
A1  - Digel, Ilya
ED  - Erni, Daniel
ED  - Fischerauer, Alice
ED  - Himmel, Jörg
ED  - Seeger, Thomas
ED  - Thelen, Klaus
T1  - Effects of nitric oxide (NO) and ATP on red blood cell phenotype and deformability
T2  - 2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West
Y1  - 2017
SN  - 978-3-9814801-9-1
U6  - http://dx.doi.org/10.17185/duepublico/43984
N1  - A young researchers track of the 7th IEEE Workshop & SENSORICA 2017
SP  - 100
EP  - 101
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Schlenkhoff, Andreas
A1  - Bung, Daniel B.
T1  - Prediction of oxygen transfer in self-aerated skimming flow on embankment stepped spillways
T2  - Water engineering for sustainable environment : 33rd IAHR congress ; 9 - 14 August 2009, Vancouver, British Columbia, Canada
Y1  - 2009
SN  - 9789078046080
SP  - 1 CD-ROM
ER  - 
TY  - CHAP
A1  - Schleupen, Josef
A1  - Engemann, Heiko
A1  - Bagheri, Mohsen
A1  - Kallweit, Stephan
T1  - The potential of SMART climbing robot combined with a weatherproof cabin for rotor blade maintenance
T2  - 17th European Conference on Composite Materials – ECCM, Munich, Germany
Y1  - 2016
N1  - ECCM 17
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Schleupen, Josef
A1  - Engemann, Heiko
A1  - Bagheri, Mohsen
A1  - Kallweit, Stephan
A1  - Dahmann, Peter
T1  - Developing a climbing maintenance robot for tower and rotor blade service of wind turbines
T2  - Advances in Robot Design and Intelligent Control : Proceedings of the 25th Conference on Robotics in Alpe-Adria-Danube Region (RAAD16)
Y1  - 2017
SN  - 978-3-319-49058-8
U6  - http://dx.doi.org/10.1007/978-3-319-49058-8_34
N1  - Advances in Robot Design and Intelligent Control ; Vol. 540
SP  - 310
EP  - 319
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Schlurmann, Torsten
A1  - Bung, Daniel B.
T1  - Experimental investigation of flow-induced radial gate vibrations at Lower Subansiri dam
T2  - Sixth Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : JOINT 2012 : 23.-29.9.2012, Keelung
Y1  - 2012
SP  - 7
EP  - 14
ER  - 
TY  - CHAP
A1  - Schmid, Beat F.
A1  - Lindemann, Markus
T1  - Elements of a reference model for electronic markets
T2  - System sciences : proceedings. Vol. 4: Internet and the digital economy track / Thirty-first Hawaii International Conference on Systems Science : HICSS'98, Big Island of Hawaii, January 6-9, 1998 / ed. by Robert W. Blanning and David R. King. IEEE catalog ; 98TB100216
Y1  - 1998
SN  - 0-8186-8242-6
SP  - 193
EP  - 201
PB  - IEEE Computer Society Pr.
CY  - Los Alamos, CA
ER  - 
TY  - CHAP
A1  - Schmidt, Thomas
A1  - Kasch, Susanne
A1  - Eichler, Fabian
A1  - Thurn, Laura
T1  - Process strategies on laser-based melting of glass powder
T2  - Lasers in Manufacturing Conference 2021
N2  - This paper presents the laser-based powder bed fusion (L-PBF) using various glass powders (borosilicate and quartz glass). Compared to metals, these require adapted process strategies. First, the glass powders were characterized with regard to their material properties and their processability in the powder bed. This was followed by investigations of the melting behavior of the glass powders with different laser wavelengths (10.6 µm, 1070 nm). In particular, the experimental setup of a CO2 laser was adapted for the processing of glass powder. An experimental setup with integrated coaxial temperature measurement/control and an inductively heatable build platform was created. This allowed the L-PBF process to be carried out at the transformation temperature of the glasses. Furthermore, the component’s material quality was analyzed on three-dimensional test specimen with regard to porosity, roughness, density and geometrical accuracy in order to evaluate the developed L-PBF parameters and to open up possible applications.
KW  - 3D-printing
KW  - glass
KW  - additive manufactureing
KW  - laser based powder fusion
Y1  - 2021
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Boltes, Maik
A1  - Kraft, Bodo
A1  - Schreiber, Marc
T1  - Multi-pedestrian tracking by moving Bluetooth-LE beacons and stationary receivers
T2  - 2017 International Conference on Indoor Positioning and Indoor Navigation (IPIN), 18-21 September 2017, Sapporo, Japan
Y1  - 2017
N1  - International Conference on Indoor Positioning and Indoor Navigation <8, 2017, Sapporo, Japan>
SP  - 1
EP  - 4
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Kraft, Bodo
A1  - Schreiber, Marc
A1  - Zündorf, Albert
T1  - Continuously evaluated research projects in collaborative decoupled environments
T2  - 2018 ACM/IEEE 5th International Workshop on Software Engineering Research and Industrial PracticePractice, May 29, 2018, Gothenburg, Sweden : SER&IP' 18
N2  - Often, research results from collaboration projects are not transferred into productive environments even though approaches are proven to work in demonstration prototypes. These demonstration prototypes are usually too fragile and error-prone to be transferred
easily into productive environments. A lot of additional work is required.
Inspired by the idea of an incremental delivery process, we introduce an architecture pattern, which combines the approach of Metrics Driven Research Collaboration with microservices for the ease of integration. It enables keeping track of project goals over the course of the collaboration while every party may focus on their expert skills: researchers may focus on complex algorithms,
practitioners may focus on their business goals.
Through the simplified integration (intermediate) research results can be introduced into a productive environment which enables
getting an early user feedback and allows for the early evaluation of different approaches. The practitioners’ business model benefits throughout the full project duration.
Y1  - 2018
SP  - 1
EP  - 9
PB  - ACM
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Kraft, Bodo
A1  - Siebigteroth, Ines
A1  - Zündorf, Albert
T1  - Schema Matching with Frequent Changes on Semi-Structured Input Files: A Machine Learning Approach on Biological Product Data
T2  - Proceedings of the 21st International Conference on Enterprise Information Systems - Volume 1: ICEIS
Y1  - 2019
SN  - 978-989-758-372-8
U6  - http://dx.doi.org/10.5220/0007723602080215
SP  - 208
EP  - 215
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Kraft, Bodo
A1  - Winkens, Marvin
A1  - Zündorf, Albert
T1  - Catalog integration of low-quality product data by attribute label ranking
T2  - Proceedings of the 9th International Conference on Data Science, Technology and Applications - Volume 1: DATA
Y1  - 2020
SN  - 978-989-758-440-4
U6  - http://dx.doi.org/10.5220/0009831000900101
SP  - 90
EP  - 101
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Kraft, Bodo
A1  - Winkens, Marvin
A1  - Zündorf, Albert
T1  - Catalog integration of heterogeneous and volatile product data
T2  - DATA 2020: Data Management Technologies and Applications
N2  - The integration of frequently changing, volatile product data from different manufacturers into a single catalog is a significant challenge for small and medium-sized e-commerce companies. They rely on timely integrating product data to present them aggregated in an online shop without knowing format specifications, concept understanding of manufacturers, and data quality. Furthermore, format, concepts, and data quality may change at any time. Consequently, integrating product catalogs into a single standardized catalog is often a laborious manual task. Current strategies to streamline or automate catalog integration use techniques based on machine learning, word vectorization, or semantic similarity. However, most approaches struggle with low-quality or real-world data. We propose Attribute Label Ranking (ALR) as a recommendation engine to simplify the integration process of previously unknown, proprietary tabular format into a standardized catalog for practitioners. We evaluate ALR by focusing on the impact of different neural network architectures, language features, and semantic similarity. Additionally, we consider metrics for industrial application and present the impact of ALR in production and its limitations.
Y1  - 2021
SN  - 978-3-030-83013-7
U6  - http://dx.doi.org/10.1007/978-3-030-83014-4_7
N1  - International Conference on Data Management Technologies and Applications, DATA 2020, 7-9 July
SP  - 134
EP  - 153
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Schmitt, Timo
A1  - Rosin, Julia
A1  - Butenweg, Christoph
T1  - Seismic Impact And Design Of Buried Pipelines
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
N2  - Seismic design of buried pipeline systems for energy and water supply is not only important for plant and operational safety but also for the maintenance of the supply infrastructure after an earthquake. The present paper shows special issues of the seismic wave impacts on buried pipelines, describes calculation methods, proposes approaches and gives calculation examples. This paper regards the effects of transient displacement differences and resulting tensions within the pipeline due to the wave propagation of the earthquake. However, the presented model can also be used to calculate fault rupture induced displacements. Based on a three-dimensional Finite Element Model parameter studies are performed to show the influence of several parameters such as incoming wave angle, wave velocity, backfill height and synthetic displacement time histories. The interaction between the pipeline and the surrounding soil is modeled with non-linear soil springs and the propagating wave is simulated affecting the pipeline punctually, independently in time and space. Special attention is given to long-distance heat pipeline systems. Here, in regular distances expansion bends are arranged to ensure movements of the pipeline due to high temperature. Such expansion bends are usually designed with small bending radii, which during the earthquake lead to high bending stresses in the cross-section of the pipeline. Finally, an interpretation of the results and recommendations are given for the most critical parameters.
Y1  - 2018
N1  - Paper No 10600
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Schmitz, Annika
A1  - Apandi, Shah Eiman Amzar Shah
A1  - Spillner, Jan
A1  - Hima, Flutura
A1  - Behbahani, Mehdi
ED  - Digel, Ilya
ED  - Staat, Manfred
ED  - Trzewik, Jürgen
ED  - Sielemann, Stefanie
ED  - Erni, Daniel
ED  - Zylka, Waldemar
T1  - Effect of different cannula positions in the pulmonary artery on blood flow and gas exchange using computational fluid dynamics analysis
T2  - 4th YRA MedTech Symposium 2024 : February 1 / 2024 / FH Aachen
N2  - Pulmonary arterial cannulation is a common and effective method for percutaneous mechanical circulatory support for concurrent right heart and respiratory failure [1]. However, limited data exists to what effect the positioning of the cannula has on the oxygen perfusion throughout the pulmonary artery (PA). This study aims to evaluate, using computational fluid dynamics (CFD), the effect of different cannula positions in the PA with respect to the oxygenation of the different branching vessels in order for an optimal cannula position to be determined. The four chosen different positions (see Fig. 1) of the cannulas are, in the lower part of the main pulmonary artery (MPA), in the MPA at the junction between the right pulmonary artery (RPA) and the left pulmonary artery (LPA), in the RPA at the first branch of the RPA and in the LPA at the first branch of the LPA.
Y1  - 2024
SN  - 978-3-940402-65-3
U6  - http://dx.doi.org/10.17185/duepublico/81475
SP  - 29
EP  - 30
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Schnabel, Eberhard
A1  - Berndt, Heinz
ED  - Nesvadba, H.
T1  - Zur selektive Abspaltbarkeit der t-Butyloxycarbonylgruppe
T2  - Peptides 1971 : proceedings of the Eleventh European Peptide Symposium, Vienna, Austria, April 1971
Y1  - 1973
SN  - 0-7204-4120-X
SP  - 69
EP  - 70
PB  - North-Holland Publ. [u.a.]
CY  - Amsterdam [u.a.]
ER  - 
TY  - CHAP
A1  - Schneckenburger, N.
A1  - Franzen, N.
A1  - Gligorevic, Snjezana
A1  - Schnell, M.
T1  - L-band compatibility of LDACS1
T2  - IEEE/AIAA 30th Digital Avionics Systems Conference (DASC) : 16 - 20 Oct. 2011, Seattle, Wash.
Y1  - 2011
SN  - 978-1-61284-797-9
SN  - 2155-7195
SP  - 4C3-1
EP  - 4C3-11
ER  - 
TY  - CHAP
A1  - Schneider, Oliver
A1  - Al Hakim, Taher
A1  - Kayser, Peter
A1  - Digel, Ilya
ED  - Erni, Daniel
ED  - Fischerauer, Alice
ED  - Himmel, Jörg
ED  - Seeger, Thomas
ED  - Thelen, Klaus
T1  - Development and trials of a test chamber for ultrasound-assisted sampling of living cells from solid surfaces
T2  - 2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West
Y1  - 2017
SN  - 978-3-9814801-9-1
U6  - http://dx.doi.org/10.17185/duepublico/43984
N1  - A young researchers track of the 7th IEEE Workshop & SENSORICA 2017
SP  - 96
EP  - 97
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Schnell, Michael
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
A1  - Walter, M.
A1  - Rihacek, Christoph
A1  - Sajatovic, Miodrag
A1  - Haindl, Bernhard
T1  - Interference mitigation for broadband L-DACS
T2  - 27th IEEE/AIAA Digital Avionics Systems Conference : DASC 2008 : 26-30 Oct. 2008, St. Paul, Minn.
Y1  - 2008
SN  - 978-1-4244-2207-4 ; 978-1-4244-2208-1
SP  - 2B2-1
EP  - 2B2-12
ER  - 
TY  - CHAP
A1  - Schnell, Michael
A1  - Franzen, Nico
A1  - Gligorevic, Snjezana
T1  - L-DACS1 laboratory demonstrator development and compatibility measurement set-up
T2  - IEEE/AIAA 29th Digital Avionics Systems Conference (DASC) : 3 - 7 Oct. 2010, Salt Lake City, Utah
Y1  - 2010
SN  - 9781424466160 ; 9781424466184
SP  - 3E3-1
EP  - 3E3-11
ER  - 
TY  - CHAP
A1  - Schoene, Jens
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Jerabek, Jakub
A1  - Chudoba, Rostislav
ED  - Fisher, Gregor
T1  - Theoretical and experimental investigations on textile-reinforced concrete spalling behavior
T2  - 8th International PhD Symposium in Civil Engineering : Lyngby, June 20-23, 2010 : proceedings
Y1  - 2010
SN  - 9788778773012
SP  - 383
EP  - 388
PB  - Technical University of Denmark, Dept. of Civil Engineering
CY  - Lyngby
ER  - 
TY  - CHAP
A1  - Scholl, Ingrid
A1  - Bartella, Alex
A1  - Moluluo, Cem
A1  - Ertural, Berat
A1  - Laing, Frederic
A1  - Suder, Sebastian
T1  - MedicVR : Acceleration and Enhancement Techniques for Direct Volume Rendering in Virtual Reality
T2  - Bildverarbeitung für die Medizin 2019 : Algorithmen – Systeme – Anwendungen
Y1  - 2019
SN  - 978-3-658-25326-4
U6  - http://dx.doi.org/10.1007/978-3-658-25326-4_32
SP  - 152
EP  - 157
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Scholl, Ingrid
A1  - Suder, Sebastian
A1  - Schiffer, Stefan
T1  - Direct Volume Rendering in Virtual Reality
T2  - Bildverarbeitung für die Medizin 2018
Y1  - 2018
SN  - 978-3-662-56537-7
U6  - http://dx.doi.org/10.1007/978-3-662-56537-7_79
SP  - 297
EP  - 302
PB  - Springer Vieweg
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Schopen, Oliver
A1  - Kemper, Hans
A1  - Esch, Thomas
T1  - Development of a comparison methodology and evaluation matrix for electrically driven compressors in ICE and FC
T2  - Proceedings of the 1st UNITED – Southeast Asia Automotive Interest Group (SAIG) International Conference
N2  - In addition to electromobility and alternative drive systems, a focus is set on electrically driven compressors (EDC), with a high potential for increasing the efficiency of internal combustion engines (ICE) and fuel cells [01]. The primary objective is to increase the ICE torque, provided independently of the ICE speed by compressing the intake air and consequently the ICE filling level supported by the compressor. For operation independent from the ICE speed, the EDC compressor is decoupled from the turbine by using an electric compressor motor (CM) instead of the turbine. ICE performances can be increased by the use of EDC where individual compressor parameters are adapted to the respective application area [02] [03]. This task contains great challenges, increased by demands with regard to pollutant reduction while maintaining constant performance and reduced fuel consumption. The FH-Aachen is equipped with an EDC test bench which enables EDC-investigations in various configurations and operating modes. Characteristic properties of different compressors can be determined, which build the basis for a comparison methodology. Subject of this project is the development of a comparison methodology for EDC with an associated evaluation method and a defined overall evaluation method. For the application of this comparison methodology, corresponding series of measurements are carried out on the EDC test bench using an appropriate test device.
KW  - electro mobility
KW  - fuel cell
KW  - internal combustion engine
KW  - electrically driven compressors
Y1  - 2021
SN  - 978-3-902103-94-9
N1  - 1st UNITED-SAIG International Conference, 21-22 APR 2021, Chulalongkorn University, Thailand
SP  - 45
EP  - 46
PB  - FH Joanneum
CY  - Graz
ER  - 
TY  - CHAP
A1  - Schopen, Oliver
A1  - Shabani, Bahman
A1  - Esch, Thomas
A1  - Kemper, Hans
A1  - Shah, Neel
ED  - Rahim, S.A.
ED  - As'arry, A.
ED  - Zuhri, M.Y.M.
ED  - Harmin, M.Y.
ED  - Rezali, K.A.M.
ED  - Hairuddin, A.A.
T1  - Quantitative evaluation of health management designs for fuel cell systems in transport vehicles
T2  - 2nd UNITED-SAIG International Conference Proceedings
N2  - Focusing on transport vehicles, mainly with regard to aviation applications, this paper presents compilation and subsequent quantitative evaluation of methods aimed at building an optimum integrated health management solution for fuel cell systems. The methods are divided into two different main types and compiled in a related scheme. Furthermore, different methods are analysed and evaluated based on parameters specific to the aviation context of this study. Finally, the most suitable method for use in fuel cell health management systems is identified and its performance and suitability is quantified.
KW  - aviation application
KW  - health management systems
KW  - fuel cell systems
Y1  - 2022
N1  - 2nd UNITED-SAIG International Conference, 23-24 May 2022, Putrajaya, Malaysia
SP  - 1
EP  - 3
ER  - 
TY  - CHAP
A1  - Schopp, Christoph
A1  - Heuermann, Holger
T1  - Electrodeless low pressure lamp with bi-static matching at 2.45 GHz
T2  - 2013 European Microwave Conference (EuMC) , Nuremberg
Y1  - 2013
SN  - 978-1-4799-0264-4
SP  - 881
EP  - 884
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Schopp, Christoph
A1  - Heuermann, Holger
A1  - Holtrup, S.
T1  - Investigation on efficacy optimization of RF-driven automotive D-lamps
T2  - 44th European Microwave Conference (EuMC),2014, Rome
Y1  - 2014
U6  - http://dx.doi.org/10.1109/EuMC.2014.6986645
SP  - 1154
EP  - 1157
ER  - 
TY  - CHAP
A1  - Schopp, Christoph
A1  - Heuermann, Holger
A1  - Marso, Michel
T1  - Multiphysical Study of an Atmospheric Microwave Argon Plasma Jet
T2  - IEEE Transactions on Plasma Science
Y1  - 2017
U6  - http://dx.doi.org/10.1109/TPS.2017.2692735
SN  - 1939-9375
VL  - 45
IS  - 6
SP  - 932
EP  - 937
PB  - IEEE
ER  -