TY  - CHAP
A1  - Pham, Phu Tinh
A1  - Nguyen, Thanh Ngoc
A1  - Staat, Manfred
T1  - FEM based shakedown analysis of hardening structures
T2  - Proceedings International Conference on Advances in Computational Mechanics (ACOME)
Y1  - 2012
N1  - International Conference on Advances in Computational Mechanics (ACOME), August 14-16, 2012, Ho Chi Minh City, Vietnam
SP  - 870
EP  - 882
ER  - 
TY  - CHAP
A1  - Streun, M.
A1  - Al-Kaddoum, R.
A1  - Parl, C.
A1  - Pietrzyk, U.
A1  - Ziemons, Karl
A1  - Waasen, S. van
T1  - Simulation studies of optical photons in monolithic block scintillators
T2  - 2011 IEEE Nuclear Science Symposium Conference Record (NSS/MIC)
N2  - The interest in PET detectors with monolithic block scintillators is growing. In order to obtain high spatial resolutions dedicated positioning algorithms are required. But even an ideal algorithm can only deliver information which is provided by the detector. In this simulation study we investigated the light distribution on one surface of cuboid LSO scintillators of different size. Scintillators with a large aspect ratio (small footprint and large height) showed significant position information only for a minimum interaction depth of the gamma particle. The results allow a quantitative estimate for a useful aspect ratio.
Y1  - 2012
SN  - 978-1-4673-0120-6 (electronic ISBN)
SN  - 978-1-4673-0118-3 (print ISBN)
U6  - http://dx.doi.org/10.1109/NSSMIC.2011.6154621
SP  - 1380
EP  - 1382
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Raatschen, Hans-Jürgen
A1  - Staat, Manfred
ED  - Holzapfel, Gerhard A.
T1  - Effectiveness of the edge-based smoothed finite element method applied to soft biological tissues
T2  - ESMC-2012 - 8th European Solid Mechanics Conference, Graz, Austria, July 9-13, 2012
Y1  - 2012
SN  - 978-3-85125-223-1
PB  - Verlag d. Technischen Universität Graz
CY  - Graz
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Nguyen, Nhu Hunyh
A1  - Staat, Manfred
T1  - Finite Element Implementation of a 3D Fung-type Model
T2  - ESMC-2012 - 8th European Solid Mechanics Conference, Graz, Austria, July 9-13, 2012
Y1  - 2012
SN  - 978-3-85125-223-1
PB  - Verlag d. Technischen Universität Graz
CY  - Graz
ER  - 
TY  - CHAP
A1  - Gerhards, Michael
A1  - Sander, Volker
A1  - Belloum, Adam
T1  - Seamlessly enabling the use of cloud resources in workflows
T2  - Cloud Computing 2013 : The Fourth International Conference on Cloud Computing, GRIDs, and Virtualization : May 27 - June 1, 2013 - Valencia, Spain
Y1  - 2013
SN  - 978-1-61208-271-4
SP  - 108
EP  - 114
PB  - Curren
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Weber, Hans-Joachim
A1  - Porschen, W.
A1  - Dietzel, F.
A1  - [u.a.], 
ED  - Streffer, Christian
T1  - In vivo analysis of the influence of combined hyperthermia and gamma irradiation on euoxic and hypoxic tumor cells
T2  - Cancer therapy by hyperthermia and radiation : [proceedings of the 2. International Symposium on Cancer Therapy by Hyperthermia and Radiation, Essen, 2.-4.6.1977]
Y1  - 1978
SN  - 0-8067-1701-7
SN  - 3-541-71701-7
SP  - 276
EP  - 277
PB  - Urban and Schwarzenberg
CY  - Baltimore ; Munich [u.a.]
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Goßmann, Matthias
A1  - Temiz Artmann, Aysegül
A1  - Staat, Manfred
T1  - Simulation of cardiac cell-seeded membranes using the edge-based smoothed FEM
T2  - 1st International Conference "Shell and Membrane Theories in Mechanics and Biology: From Macro- to Nanoscale Structures", Minsk, Belarus, Sept. 16-20, 2013
Y1  - 2013
SN  - 978-985-553-135-8
SP  - 165
EP  - 167
PB  - Verl. d. Weißruss. Staatl. Univ.
CY  - Minsk
ER  - 
TY  - CHAP
A1  - Wu, Chunsheng
A1  - Poghossian, Arshak
A1  - Werner, Frederik
A1  - Bronder, Thomas
A1  - Bäcker, Matthias
A1  - Wang, Ping
A1  - Schöning, Michael Josef
T1  - An application of a scanning light-addressable potentiometric sensor for label-free DNA detection
T2  - 11. Dresdner Sensor-Symposium : 9.-11.12.2013
Y1  - 2013
SN  - 978-3-9813484-5-3
SP  - 164
EP  - 168
ER  - 
TY  - CHAP
A1  - Terstegge, Andreas
A1  - Weber, S.
A1  - Herzog, H.
A1  - Müller-Gärtner, H. W.
A1  - Halling, H.
T1  - Design and implementation aspects of a 3D reconstruction algorithm for the Jülich TierPET system
T2  - 1997 International Meeting on Fully ThreeDimensional Image Reconstruction in Radiology and Nuclear Medicine : 3D97
Y1  - 1997
SP  - 170
EP  - 173
ER  - 
TY  - CHAP
A1  - Weber, S.
A1  - Terstegge, Andreas
A1  - Engels, R.
A1  - Herzog, H.
A1  - Reinartz, R.
A1  - Reinhart, P.
A1  - Rongen, F.
A1  - Müller-Gärtner, H. W.
A1  - Halling, H.
T1  - The KFA TierPET: performance characteristics and measurements
T2  - Conference record / 1996 IEEE Nuclear Science Symposium [and Medical Imaging], November 2 - 9, 1996, Anaheim, California ; vol. 2
Y1  - 1996
SN  - 0-7803-3534-1
SN  - 1082-3654
SP  - 1117
EP  - 1119
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Weber, S.
A1  - Terstegge, Andreas
A1  - Halling, H.
A1  - Herzog, H.
A1  - Reinartz, R.
A1  - Reinhart, P.
A1  - Rongen, F.
A1  - Müller-Gärtner, H.-W.
T1  - The design of an animal PET: flexible geometry for achieving optimal spatial resolution or high sensitivity
T2  - Conference record / 1995 IEEE Nuclear Science Symposium and Medical Imaging, October 21 - 28, 1995, San Francisco ; vol. 2
Y1  - 1995
SN  - 078033180X ; 0780331818 ; 0780331826
SP  - 1002
EP  - 1005
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Koch, Jan-Peter
A1  - Raatschen, Hans-Jürgen
A1  - Staat, Manfred
ED  - Onate, E.
T1  - Evaluation of a computational model for drug action on cardiac tissue
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20 - 25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Jung, Alexander
A1  - Staat, Manfred
A1  - Müller, Wolfram
ED  - Onate, E.
T1  - Optimization of the flight style in ski jumping
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20 - 25, 2014, Barcelona
Y1  - 2014
N1  - Das Paper wurde nach der Konferenz überarbeitet.
SP  - 799
EP  - 810
ER  - 
TY  - CHAP
A1  - Bhattarai, Aroj
A1  - Frotscher, Ralf
A1  - Sora, M.-C.
A1  - Staat, Manfred
ED  - Onate, E.
T1  - A 3D finite element model of the female pelvic floor for the reconstruction of urinary incontinence
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
ED  - Onate, E.
T1  - Uncertain multimode failure and limit analysis of shells
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Staat, Manfred
ED  - Onate, E.
T1  - A face-based smoothed finite element method for hyperelastic models and tissue growth
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Tran, Ngoc Trinh
A1  - Staat, Manfred
A1  - Stavroulakis, G. E.
ED  - Onate, E.
T1  - A multicriteria method for truss optimization
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Schreiber, Marc
A1  - Hirtbach, Stefan
A1  - Kraft, Bodo
A1  - Steinmetzler, Andreas
ED  - Kowalewski, Stefan
T1  - Software in the city: visual guidance through large scale software projects
T2  - Software Engineering 2013 : Fachtagung des GI-Fachbereichs Softwaretechnik, 26. Februar-1. März 2013 in Aachen. (GI-Edition ; 213)
Y1  - 2013
SN  - 978-3-88579-607-7 ; 978-3-88579-609-1
SP  - 213
EP  - 224
PB  - Ges. für Informatik
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Schreiber, Marc
A1  - Barkschat, Kai
A1  - Kraft, Bodo
T1  - Using Continuous Integration to organize and monitor the annotation process of domain specific corpora
T2  - 5th International Conference on Information and Communication Systems (ICICS) : 1-3 April 2014, Irbid, Jordanien
Y1  - 2014
SN  - 978-1-4799-3022-7
U6  - http://dx.doi.org/10.1109/IACS.2014.6841958
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Buniatyan, V. V.
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Rustamyan, L. G.
A1  - Hovnikyan, H. H.
T1  - Equivalent circuit and optimization of impedance characteristics of an electrolyte conductivity sensor
T2  - Proceedings of State Engineering University Armenia : Series Information technologies, electronics, radio engineering
Y1  - 2014
VL  - Iss. 17
IS  - No. 1
SP  - 69
EP  - 76
ER  - 
TY  - CHAP
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Buniatyan, V.
A1  - Schöning, Michael Josef
T1  - Multi-parameter detection for supporting monitoring and control of biogas processes in agriculture
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 5
PB  - VDE-Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Werner, Frederik
A1  - Yoshinobu, T.
A1  - Miyamoto, K.
A1  - Schöning, Michael Josef
A1  - Wagner, Torsten
T1  - Semiconductor-based sensors for imaging of chemical processes
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 5
PB  - VDE-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Wu, Chunsheng
A1  - Bronder, Thomas
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - DNA-hybridization detection using light-addressable potentiometric sensor modified with gold layer
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 4
PB  - VDE-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Kirchner, Patrick
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Flexible polyimide-based calorimetric gas sensors for monitoring hy-drogen peroxide in sterilisation processes of aseptic filling machines
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 4
PB  - VDE-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Bäcker, Matthias
A1  - Schusser, Sebastian
A1  - Leinhos, Marcel
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Sensor system for the monitoring of degradation processes of biodegradable biopolymers
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 4
PB  - VDE-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Voronkova, Eva B.
A1  - Bauer, Svetlana M.
A1  - Kotliar, Konstantin
T1  - Computer simulation of the cornea-scleral shell as applied to pressure-volume relationship in the human eye
T2  - 2014 International Conference on Computer Technologies in Physical and Engineering Applications :  ICCTPEA 2014 : proceedings : June 30 2014-July 4 2014, St. Petersburg
Y1  - 2014
SN  - 978-1-4799-5315-8
SP  - 204
EP  - 205
ER  - 
TY  - CHAP
A1  - Kloock, Joachim P.
A1  - Schöning, Michael Josef
T1  - Heavy metal detection with semiconductor devices based on PLD-prepared chalcogenide glass thin films
T2  - Armenian Journal of Physics
Y1  - 2007
SN  - 1829-1171
SP  - 95
EP  - 98
ER  - 
TY  - CHAP
A1  - Näther, Niko
A1  - Poghossian, Arshak
A1  - Platen, J.
A1  - Yoshinobu, T.
A1  - Koudelka-Hep, M.
A1  - Schöning, Michael Josef
T1  - Multi-parameter sensing of both physical and (bio-)chemical quantities using the same transducer principle
T2  - Biochemical sensing utilisation of micro- and nanotechnologies : Warsaw, [23rd - 26th] November 2005 / ed. by M. Mascini ...
Y1  - 2006
SP  - 172
EP  - 181
CY  - Warsaw
ER  - 
TY  - CHAP
A1  - Kloock, Joachim P.
A1  - Schubert, J.
A1  - Ermelenko, Y.
A1  - Vlasov, Y. G.
A1  - Bratov, A.
A1  - Schöning, Michael Josef
T1  - Thin-film sensors with chalcogenide glass materials – a general survey
T2  - Biochemical sensing utilisation of micro- and nanotechnologies : Warsaw, [23rd - 26th] November 2005 / ed. by M. Mascini ...
Y1  - 2006
SP  - 92
EP  - 97
CY  - Warsaw
ER  - 
TY  - CHAP
A1  - Beging, Stefan
A1  - Poghossian, Arshak
A1  - Mlynek, D.
A1  - Hataihimakul, S.
A1  - Pedraza, A.
A1  - Dhawan, S.
A1  - Laube, N.
A1  - Kleinen, L.
A1  - Baldsiefen, G.
A1  - Busch, H.
A1  - Schöning, Michael Josef
T1  - Ion-selective sensors for the determination of the risk of urinary stone formation
T2  - Micro- and Nanosystems in biochemical diagnosis : Principles and applications
Y1  - 2010
SP  - 74
EP  - 80
CY  - Warsaw
ER  - 
TY  - CHAP
A1  - Wagner, Torsten
A1  - Yoshinobu, T.
A1  - Schöning, Michael Josef
T1  - Light-addressable potentiometric sensor as semiconductor-based sensor platform for (bio-) chemical sensing
T2  - Armenian Journal of Physics
Y1  - 2008
SN  - 1829-1171
SP  - 99
EP  - 103
ER  - 
TY  - CHAP
A1  - Weil, M.
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Cherstvy, A.
T1  - Electrical monitoring of layer-by-layer adsorption of oppositely charged macromolecules by means of capacitive field-effect devices
Y1  - 2012
SN  - 978-3-9813484-2-2
U6  - http://dx.doi.org/10.5162/IMCS2012/P2.5.2
SP  - 1575
EP  - 1578
ER  - 
TY  - CHAP
A1  - Bohrn, Ulrich
A1  - Mucha, Andreas
A1  - Werner, Frederik
A1  - Stütz, Evamaria
A1  - Bäcker, Matthias
A1  - Krumbe, Christoph
A1  - Schienle, Meinrad
A1  - Fleischer, Maximilian
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Detection of toxic chromium species in water using cellbased sensor systems
Y1  - 2012
SN  - 978-3-9813484-2-2
U6  - http://dx.doi.org/10.5162/IMCS2012/P2.1.14
SP  - 1364
EP  - 1367
ER  - 
TY  - CHAP
A1  - Schöning, Michael Josef
A1  - Abouzar, Maryam H.
A1  - Wagner, Torsten
A1  - Näther, Niko
A1  - Rolka, David
A1  - Yoshinobu, Tatsuo
A1  - Kloock, Joachim P.
A1  - Turek, Monika
A1  - Ingebrandt, Sven
A1  - Poghossian, Arshak
T1  - A semiconductor-based field-effect platform for (bio-)chemical and physical sensors: From capacitive EIS sensors and LAPS over ISFETs to nano-scale devices
T2  - MRS Proceedings
Y1  - 2006
U6  - http://dx.doi.org/10.1557/PROC-0952-F08-02
N1  - Vol. 952 - Symposium F - Integrated Nanosensors
SP  - 1
EP  - 9
ER  - 
TY  - CHAP
A1  - Moritz, Werner
A1  - Yoshinobu, Tatsuo
A1  - Finger, Friedhelm
A1  - Krause, Steffi
A1  - Schöning, Michael Josef
T1  - Amorphous silicon as semiconductor material for high resolution LAPS
T2  - Eurosensors XVII : the 17th European Conference on Solid-State Transducers ; University of Minho, Guimarães, Portugal, September 21 - 24, 2003
Y1  - 2003
SP  - 48
EP  - 49
ER  - 
TY  - CHAP
A1  - Ermelenko, Y.
A1  - Yoshinobu, T.
A1  - Mourzina, Y.
A1  - Schöning, Michael Josef
A1  - Vlasov, Y.
A1  - Iwasaki, H.
T1  - A multisensor based on laser scanned silicon transducer (LSST): development and properties
T2  - Eurosensors XVII : the 17th European Conference on Solid-State Transducers ; University of Minho, Guimarães, Portugal, September 21 - 24, 2003
Y1  - 2003
SP  - 72
EP  - 73
ER  - 
TY  - CHAP
A1  - Yoshinobu, T.
A1  - Schöning, Michael Josef
A1  - Finger, F.
A1  - Moritz, W.
A1  - Iwasaki, H.
T1  - Thin-film a-Si LAPS : Preparation and pH sensitivity
T2  - Eurosensors XVII : the 17th European Conference on Solid-State Transducers ; University of Minho, Guimarães, Portugal, September 21 - 24, 2003
Y1  - 2003
SP  - 88
EP  - 89
ER  - 
TY  - CHAP
A1  - Bohrn, Ulrich
A1  - Stütz, Evamaria
A1  - Fleischer, Maximilian
A1  - Schöning, Michael Josef
A1  - Wagner, Patrick
T1  - Living cell-based gas sensor system for the detection of acetone in air
Y1  - 2012
SN  - 978-3-9813484-2-2
U6  - http://dx.doi.org/10.5162/IMCS2012/3.2.3
SP  - 269
EP  - 272
ER  - 
TY  - CHAP
A1  - Takenaga, Shoko
A1  - Werner, Frederik
A1  - Sawada, Kazuaki
A1  - Schöning, Michael Josef
T1  - Comparison of label-free ACh image sensors based on CCD and LAPS
Y1  - 2012
SN  - 978-3-9813484-2-2
U6  - http://dx.doi.org/10.5162/IMCS2012/4.2.6
SP  - 356
EP  - 359
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Schumacher, Kerstin
A1  - Kloock, Joachim P.
A1  - Rosenkranz, Christian
A1  - Schultze, Joachim W.
A1  - Müller-Veggian, Mattea
A1  - Schöning, Michael Josef
T1  - Functional testing and characterisation of ISFETs on wafer level by means of a micro-droplet cell
N2  - A wafer-level functionality testing and characterisation system for ISFETs (ionsensitive field-effect transistor) is realised by means of integration of a specifically designed capillary electrochemical micro-droplet cell into a commercial wafer prober-station. The developed system allows the identification and selection of “good” ISFETs at the earliest stage and to avoid expensive bonding, encapsulation and packaging processes for nonfunctioning ISFETs and thus, to decrease costs, which are wasted for bad dies. The developed system is also feasible for wafer-level characterisation of ISFETs in terms of sensitivity, hysteresis and response time. Additionally, the system might be also utilised for wafer-level testing of further electrochemical sensors.
KW  - Biosensor
KW  - Biosensorik
KW  - ISFET
KW  - Wafer
KW  - ISFET
KW  - wafer-level testing
KW  - capillary micro-droplet cell
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1259
ER  - 
TY  - CHAP
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Preface of the Special Issue of I3S 2005 in Jülich (Germany)
N2  - International Symposium on Sensor Science, I3S 2005 <3; 2005; Juelich, Germany> In: Sensors 2006, 6, 260-261 ISSN 1424-8220
KW  - Biosensor
KW  - I3S 2005
KW  - International Symposium on Sensor Science
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1365
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Heitzer, Michael
T1  - The restricted influence of kinematic hardening on shakedown loads
N2  - Structural design analyses are conducted with the aim of verifying the exclusion of ratcheting. To this end it is important to make a clear distinction between the shakedown range and the ratcheting range. In cyclic plasticity more sophisticated hardening models have been suggested in order to model the strain evolution observed in ratcheting experiments. The hardening models used in shakedown analysis are comparatively simple. It is shown that shakedown analysis can make quite stable predictions of admissible load ranges despite the simplicity of the underlying hardening models. A linear and a nonlinear kinematic hardening model of two-surface plasticity are compared in material shakedown analysis. Both give identical or similar shakedown ranges. Structural shakedown analyses show that the loading may have a more pronounced effect than the hardening model.
KW  - Biomedizinische Technik
KW  - Einspielen <Werkstoff>
KW  - Shakedown
KW  - Ratcheting
KW  - Bruchmechanik
KW  - shakedown
KW  - material shakedown
KW  - linear kinematic hardening
KW  - nonlinear kinematic hardening
KW  - ratchetting
Y1  - 2002
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Heitzer, Michael
T1  - Direct static FEM approach to limit and shakedown analysis
N2  - Safety and reliability of structures may be assessed indirectly by stress distributions. Limit and shakedown theorems are simplified but exact methods of plasticity that provide safety factors directly in the loading space. These theorems may be used for a direct definition of the limit state function for failure by plastic collapse or by inadaptation. In a FEM formulation the limit state function is obtained from a nonlinear optimization problem. This direct approach reduces considerably the necessary knowledge of uncertain technological input data, the computing time, and the numerical error. Moreover, the direct way leads to highly effective and precise reliability analyses. The theorems are implemented into a general purpose FEM program in a way capable of large-scale analysis.
KW  - Einspielen <Werkstoff>
KW  - Nichtlineare Optimierung
KW  - Shakedown
KW  - Shakedown
KW  - limit load
KW  - lower bound theorem
KW  - nonlinear optimization
KW  - reliability
Y1  - 2000
ER  - 
TY  - CHAP
A1  - Staat, Manfred
T1  - Design by Analysis of Pressure Components by non-linear Optimization
N2  - This paper presents the direct route to Design by Analysis (DBA) of the new European pressure vessel standard in the language of limit and shakedown analysis (LISA). This approach leads to an optimization problem. Its solution with Finite Element Analysis is demonstrated for some examples from the DBA-Manual. One observation from the examples is, that the optimisation approach gives reliable and close lower bound solutions leading to simple and optimised design decision.
KW  - Analytischer Zulaessigkeitsnachweis
KW  - FEM
KW  - Einspiel-Analyse
KW  - design-by-analysis
KW  - finite element analysis
KW  - limit and shakedown analysis
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Ballmann, J.
T1  - Fundamental aspects of numerical methods for the propagation of multi-dimensional nonlinear waves in solids
T2  - Nonlinear hyperbolic equations : theory, computations methods, and applications ; proceedings of the 2nd International Conference on Nonlinear Hyperbolic Problems, Aachen
N2  - The nonlinear scalar constitutive equations of gases lead to a change in sound speed from point to point as would be found in linear inhomogeneous (and time dependent) media. The nonlinear tensor constitutive equations of solids introduce the additional local effect of solution dependent anisotropy. The speed of a wave passing through a point changes with propagation direction and its rays are inclined to the front. It is an open question whether the widely used operator splitting techniques achieve a dimensional splitting with physically reasonable results for these multi-dimensional problems. May be this is the main reason why the theoretical and numerical investigations of multi-dimensional wave propagation in nonlinear solids are so far behind gas dynamics. We hope to promote the subject a little by a discussion of some fundamental aspects of the solution of the equations of nonlinear elastodynamics. We use methods of characteristics because they only integrate mathematically exact equations which have a direct physical interpretation.
KW  - Nichtlineare Welle
KW  - Nichtlineare Gleichung
KW  - Festkörper
KW  - Elastodynamik
KW  - Multi-dimensional wave propagation
KW  - nonlinear solids
KW  - nonlinear tensor constitutive equation
Y1  - 1989
SP  - 574
EP  - 588
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
A1  - Kreißig, R.
T1  - Calculation of load carrying capacity of shell structures with elasto-plastic material by direct methods
N2  - Proceedings of the International Conference on Material Theory and Nonlinear Dynamics. MatDyn. Hanoi, Vietnam, Sept. 24-26, 2007, 8 p. In this paper, a method is introduced to determine the limit load of general shells using the finite element method. The method is based on an upper bound limit and shakedown analysis with elastic-perfectly plastic material model. A non-linear constrained optimisation problem is solved by using Newton’s method in conjunction with a penalty method and the Lagrangean dual method. Numerical investigation of a pipe bend subjected to bending moments proves the effectiveness of the algorithm.
KW  - Finite-Elemente-Methode
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
A1  - Kreißig, R.
T1  - Finite element shakedown and limit reliability analysis of thin shells
N2  - A procedure for the evaluation of the failure probability of elastic-plastic thin shell structures is presented. The procedure involves a deterministic limit and shakedown analysis for each probabilistic iteration which is based on the kinematical approach and the use the exact Ilyushin yield surface. Based on a direct definition of the limit state function, the non-linear problems may be efficiently solved by using the First and Second Order Reliabiblity Methods (Form/SORM). This direct approach reduces considerably the necessary knowledge of uncertain technological input data, computing costs and the numerical error. In: Computational plasticity / ed. by Eugenio Onate. Dordrecht: Springer 2007. VII, 265 S. (Computational Methods in Applied Sciences ; 7) (COMPLAS IX. Part 1 . International Center for Numerical Methods in Engineering (CIMNE)). ISBN 978-1-402-06576-7  S. 186-189
KW  - Finite-Elemente-Methode
KW  - Limit analysis
KW  - shakedown analysis
KW  - Exact Ilyushin yield surface
KW  - Random variable
KW  - First Order Reliabiblity Method
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Srivastava, Alok
A1  - Singh, Virendra
A1  - Dhand, Chetna
A1  - Kaur, Manindar
A1  - Singh, Tejvir
A1  - Witte, Katrin
A1  - Scherer, Ulrich W.
T1  - Study of swift heavy ion modified conduction polymer composites for application as gas sensor
N2  - A polyaniline-based conducting composite was prepared by oxidative polymerisation of aniline in a polyvinylchloride (PVC) matrix. The coherent free standing thin films of the composite were prepared by a solution casting method. The polyvinyl chloride-polyaniline composites exposed to 120 MeV ions of silicon with total ion fluence ranging from 1011 to 1013 ions/cm2, were observed to be more sensitive towards ammonia gas than the unirradiated composite. The response time of the irradiated composites was observed to be comparably shorter. We report for the first time the application of swift heavy ion modified insulating polymer conducting polymer (IPCP) composites for sensing of ammonia gas.
KW  - Biosensor
KW  - Conducing polymer
KW  - ammonia gas sensors
KW  - swift heavy ions
KW  - polymer composites
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1345
ER  - 
TY  - CHAP
A1  - Chaiyboun, Ali
A1  - Traute, Rüdiger
A1  - Kiesewetter, Olaf
A1  - Ahlers, Simon
A1  - Müller, Gerhard
A1  - Doll, Theodor
T1  - Modular analytical multicomponent analysis in gas sensor arrays
N2  - A multi-sensor system is a chemical sensor system which quantitatively and qualitatively records gases with a combination of cross-sensitive gas sensor arrays and pattern recognition software. This paper addresses the issue of data analysis for identification of gases in a gas sensor array. We introduce a software tool for gas sensor array configuration and simulation. It concerns thereby about a modular software package for the acquisition of data of different sensors. A signal evaluation algorithm referred to as matrix method was used specifically for the software tool. This matrix method computes the gas concentrations from the signals of a sensor array. The software tool was used for the simulation of an array of five sensors to determine gas concentration of CH4, NH3, H2, CO and C2H5OH. The results of the present simulated sensor array indicate that the software tool is capable of the following: (a) identify a gas independently of its concentration; (b) estimate the concentration of the gas, even if the system was not previously exposed to this concentration; (c) tell when a gas concentration exceeds a certain value. A gas sensor data base was build for the configuration of the software. With the data base one can create, generate and manage scenarios and source files for the simulation. With the gas sensor data base and the simulation software an on-line Web-based version was developed, with which the user can configure and simulate sensor arrays on-line.
KW  - Biosensor
KW  - Main sensitivity
KW  - cross sensitivity
KW  - matrix method
KW  - gas sensor array
KW  - modelling
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1358
ER  - 
TY  - CHAP
A1  - Sakthivel, Mariappan
A1  - Weppner, Werner
T1  - Response behaviour of a hydrogen sensor based on ionic conducting polymer-metal interfaces prepared by the chemical reduction method
N2  - A solid-state amperometric hydrogen sensor based on a protonated Nafion membrane and catalytic active electrode operating at room temperature was fabricated and tested. Ionic conducting polymer-metal electrode interfaces were prepared chemically by using the impregnation-reduction method. The polymer membrane was impregnated with tetra-ammine platinum chloride hydrate and the metal ions were subsequently reduced by using either sodium tetrahydroborate or potassium tetrahydroborate. The hydrogen sensing characteristics with air as reference gas is reported. The sensors were capable of detecting hydrogen concentrations from 10 ppm to 10% in nitrogen. The response time was in the range of 10-30 s and a stable linear current output was observed. The thin Pt films were characterized by XRD, Infrared Spectroscopy, Optical Microscopy, Atomic Force Microscopy, Scanning Electron Microscopy and EDAX.
KW  - Biosensor
KW  - Hydrogen sensor
KW  - amperometric sensor
KW  - porous Pt electrode
KW  - chemical reduction method
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1399
ER  - 
TY  - CHAP
A1  - Koplin, Tobias J.
A1  - Siemons, Maike
A1  - Océn-Valéntin, César
A1  - Sanders, Daniel
A1  - Simon, Ulrich
T1  - Workflow for high throughput screening of gas sensing materials
N2  - The workflow of a high throughput screening setup for the rapid identification of new and improved sensor materials is presented. The polyol method was applied to prepare nanoparticular metal oxides as base materials, which were functionalised by surface doping. Using multi-electrode substrates and high throughput impedance spectroscopy (HT-IS) a wide range of materials could be screened in a short time. Applying HT-IS in search of new selective gas sensing materials a NO2-tolerant NO sensing material with reduced sensitivities towards other test gases was identified based on iridium doped zinc oxide. Analogous behaviour was observed for iridium doped indium oxide.
KW  - Biosensor
KW  - High throughput experimentation
KW  - gas sensor
KW  - metal oxide
KW  - doping
KW  - impedance spectroscopy
KW  - nitrogen oxides
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1407
ER  - 
TY  - CHAP
A1  - Näther, Niko
A1  - Juárez, Leon M.
A1  - Emmerich, Rüdiger
A1  - Berger, Jörg
A1  - Friedrich, Peter
A1  - Schöning, Michael Josef
T1  - Detection of hydrogen peroxide (H2O2) at exposed temperatures for industrial processes
N2  - An H2O2 sensor for the application in industrial sterilisation processes has been developed. Therefore, automated sterilisation equipment at laboratory scale has been constructed using parts from industrial sterilisation facilities. In addition, a software tool has been developed for the control of the sterilisation equipment at laboratory scale. First measurements with the developed sensor set-up as part of the sterilisation equipment have been performed and the sensor has been physically characterised by optical microscopy and SEM.
KW  - Biosensor
KW  - Gas sensor
KW  - hydrogen peroxide
KW  - sterilisation
KW  - catalytic decomposition
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1418
ER  - 
TY  - CHAP
A1  - Wagner, Thorsten
A1  - Kohl, Claus-Dieter
A1  - Fröba, Michael
A1  - Tiemann, Michael
T1  - Gas sensing properties of ordered mesoporous SnO2
N2  - We report on the synthesis and CO gas-sensing properties of mesoporous tin(IV) oxides (SnO2). For the synthesis cetyltrimethylammonium bromide (CTABr) was used as a structure-directing agent; the resulting SnO2 powders were applied as films to commercially available sensor substrates by drop coating. Nitrogen physisorption shows specific surface areas up to 160 m2·g-1 and mean pore diameters of about 4 nm, as verified by TEM. The film conductance was measured in dependence on the CO concentration in humid synthetic air at a constant temperature of 300 °C. The sensors show a high sensitivity at low CO concentrations and turn out to be largely insensitive towards changes in the relative humidity. We compare the materials with commercially available SnO2-based sensors.
KW  - Biosensor
KW  - Tin oxide
KW  - sensing properties
KW  - CO
KW  - humidity
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1422
ER  - 
TY  - CHAP
A1  - Mirmohseni, Abdolreza
A1  - Rostamizadeh, Kobra
T1  - Quartz crystal nanobalance in conjunction with principal component analysis for  identification of volatile organic compounds
N2  - Quartz crystal nanobalance (QCN) sensors are considered as powerful masssensitive sensors to determine materials in the sub-nanogram level. In this study, a single piezoelectric quartz crystal nanobalance modified with polystyrene was employed to detect benzene, toluene, ethylbenzene and xylene (BTEX compounds). The frequency shift of the QCN sensor was found to be linear against the BTEX compound concentrations in the range about 1-45 mg l-1. The correlation coefficients for benzene, toluene, ethylbenzene, and xylene were 0.991, 0.9977, 0.9946 and 0.9971, respectively. The principal component analysis was also utilized to process the frequency response data of the single piezoelectric crystal at different times, considering to the different adsorption-desorption dynamics of BTEX compounds. Using principal component analysis, it was found that over 90% of the data variance could still be explained by use of two principal components (PC1 and PC2). Subsequently, the successful identification of benzene and toluene was possible through the principal component analysis of the transient responses of the polystyrene modified QCN sensor. The results showed that the polystyrene-modified QCN had favorable identification and quantification performances for the BTEX compounds.
KW  - Biosensor
KW  - Quartz crystal nanobalance (QCN)
KW  - BTEX compounds
KW  - principal component
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1434
ER  - 
TY  - CHAP
A1  - Kreutz, Christian
A1  - Lörgen, Jürgen
A1  - Graewe, Boris
A1  - Bargon, Joachim
A1  - Yoshida, Mayumi
A1  - Freso, Zachary M.
A1  - Frèchet, Jean M. J.
T1  - High frequency quartz micro balances: a promising path to enhanced sensitivity of gravimetric sensors
N2  - An array of 50 MHz quartz microbalances (QMBs) coated with a dendronized polymer was used to detect small amounts of volatile organic compounds (VOCs) in the gas phase. The results were compared to those obtained with the commonly used 10 MHz QMBs. The 50 MHz QMBs proved to be a powerful tool for the detection of VOCs in the gas phase; therefore, they represent a promising alternative to the much more delicate surface acoustic wave devices (SAWs).
KW  - Biosensor
KW  - Quartz micro balances
KW  - electronic noses dendronized polymers inverted mesa technology
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1445
ER  - 
TY  - CHAP
A1  - Rabner, Arthur
A1  - Shacham, Yosi
T1  - A concept for a sensitive micro total analysis system for high throughput fluorescence imaging
N2  - This paper discusses possible methods for on-chip fluorescent imaging for integrated bio-sensors. The integration of optical and electro-optical accessories, according to suggested methods, can improve the performance of fluorescence imaging. It can boost the signal to background ratio by a few orders of magnitudes in comparison to conventional discrete setups. The methods that are present in this paper are oriented towards building reproducible arrays for high-throughput micro total analysis systems (µTAS). The first method relates to side illumination of the fluorescent material placed into microcompartments of the lab-on-chip. Its significance is in high utilization of excitation energy for low concentration of fluorescent material. The utilization of a transparent µLED chip, for the second method, allows the placement of the excitation light sources on the same optical axis with emission detector, such that the excitation and emission rays are directed controversly. The third method presents a spatial filtering of the excitation background.
KW  - Biosensor
KW  - Fluorescence
KW  - imaging
KW  - lab-on-chip
KW  - fluidic
KW  - lenslet array
KW  - LED chip
KW  - image sensor
KW  - biosensor
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1456
ER  - 
TY  - CHAP
A1  - Förster, Arnold
A1  - Stock, Jürgen
A1  - Montanari, Simone
A1  - Lepsa, Mihail Ion
A1  - Lüth, Hans
T1  - Fabrication and characterisation of GaAs Gunn Diode Chips for applications at 77 GHz in automotive industry
N2  - GaAs-based Gunn diodes with graded AlGaAs hot electron injector heterostructures have been developed under the special needs in automotive applications. The fabrication of the Gunn diode chips was based on total substrate removal and processing of integrated Au heat sinks. Especially, the thermal and RF behavior of the diodes have been analyzed by DC, impedance and S-parameter measurements. The electrical investigations have revealed the functionality of the hot electron injector. An optimized layer structure could fulfill the requirements in adaptive cruise control (ACC) systems at 77 GHz with typical output power between 50 and 90 mW.
KW  - Biosensor
KW  - Gunn diode
KW  - microwave generation
KW  - GaAs hot electron injector
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1462
ER  - 
TY  - CHAP
A1  - Platen, Johannes
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Microstructured Nanostructures – nanostructuring by means of conventional photolithography and layer-expansion technique
N2  - A new and simple method for nanostructuring using conventional photolithography and layer expansion or pattern-size reduction technique is presented, which can further be applied for the fabrication of different nanostructures and nano-devices. The method is based on the conversion of a photolithographically patterned metal layer to a metal-oxide mask with improved pattern-size resolution using thermal oxidation. With this technique, the pattern size can be scaled down to several nanometer dimensions. The proposed method is experimentally demonstrated by preparing nanostructures with different configurations and layouts, like circles, rectangles, trapezoids, “fluidic-channel”-, “cantilever”- and meander-type structures.
KW  - Biosensor
KW  - Nanostructuring
KW  - layer expansion
KW  - pattern-size reduction
KW  - self-aligned patterning
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1477
ER  - 
TY  - CHAP
A1  - Pijanowska, Dorota G.
A1  - Remiszewska, Elzbieta
A1  - Pederzolli, Cecilia
A1  - Lunelli, Lorenzo
A1  - Vendano, Michele
A1  - Canteri, Roberto
A1  - Dudzinski, Konrad
A1  - Kruk, Jerzy
A1  - Torbicz, Wladyslaw
T1  - Surface modification for microreactor fabrication
N2  - In this paper, methods of surface modification of different supports, i.e. glass and polymeric beads for enzyme immobilisation are described. The developed method of enzyme immobilisation is based on Schiff’s base formation between the amino groups on the enzyme surface and the aldehyde groups on the chemically modified surface of the supports. The surface of silicon modified by APTS and GOPS with immobilised enzyme was characterised by atomic force microscopy (AFM), time-of-flight secondary ion mass spectroscopy (ToF-SIMS) and infrared spectroscopy (FTIR). The supports with immobilised enzyme (urease) were also tested in combination with microreactors fabricated in silicon and Perspex, operating in a flow-through system. For microreactors filled with urease immobilised on glass beads (Sigma) and on polymeric beads (PAN), a very high and stable signal (pH change) was obtained. The developed method of urease immobilisation can be stated to be very effective.
KW  - Biosensor
KW  - Microreactors
KW  - surface modification
KW  - enzyme immobilisation
KW  - lab-on-a-chip
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1480
ER  - 
TY  - CHAP
A1  - Bukhari, Syed Faisal Ahmed
A1  - Yang, Wuqiang
T1  - Multi-interface level sensors and new development in monitoring and control of oil separators
N2  - In the oil industry, huge saving may be made if suitable multi-interface level measurement systems are employed for effectively monitoring crude oil separators and efficient control of their operation. A number of techniques, e.g. externally mounted displacers, differential pressure transmitters and capacitance rod devices, have been developed to measure the separation process with gas, oil, water and other components. Because of the unavailability of suitable multi-interface level measurement systems, oil separators are currently operated by the trial-and-error approach. In this paper some conventional techniques, which have been used for level measurement in industry, and new development are discussed.
KW  - Biosensor
KW  - Level sensor
KW  - multi-interface measurement
KW  - electrical capacitance tomography
KW  - ECT
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1498
ER  - 
TY  - CHAP
A1  - Tymecki, Lukasz
A1  - Glab, Stanislaw
A1  - Koncki, Robert
T1  - Miniaturized, planar ion-selective electrodes fabricated by means of thick-film  technology
N2  - Various planar technologies are employed for developing solid-state sensors having low cost, small size and high reproducibility; thin- and thick-film technologies are most suitable for such productions. Screen-printing is especially suitable due to its simplicity, low-cost, high reproducibility and efficiency in large-scale production. This technology enables the deposition of a thick layer and allows precise pattern control. Moreover, this is a highly economic technology, saving large amounts of the used inks. In the course of repetitions of the film-deposition procedure there is no waste of material due to additivity of this thick-film technology. Finally, the thick films can be easily and quickly deposited on inexpensive substrates. In this contribution, thick-film ion-selective electrodes based on ionophores as well as crystalline ion-selective materials dedicated for potentiometric measurements are demonstrated. Analytical parameters of these sensors are comparable with those reported for conventional potentiometric electrodes. All mentioned thick-film strip electrodes have been totally fabricated in only one, fully automated thickfilm technology, without any additional manual, chemical or electrochemical steps. In all cases simple, inexpensive, commercially available materials, i.e. flexible, plastic substrates and easily cured polymer-based pastes were used.
KW  - Biosensor
KW  - Potentiometry
KW  - thick-film technology
KW  - screen-printing
KW  - ion-selective electrodes
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1506
ER  - 
TY  - CHAP
A1  - Spannhake, Jan
A1  - Schulz, Olaf
A1  - Helwig, Andreas
A1  - Krenkow, Angelika
A1  - Müller, Gerhard
A1  - Doll, Theodor
T1  - High-temperature MEMS heater platforms: long-term performance of metal and semiconductor heater materials
N2  - Micromachined thermal heater platforms offer low electrical power consumption and high modulation speed, i.e. properties which are advantageous for realizing nondispersive infrared (NDIR) gas- and liquid monitoring systems. In this paper, we report on investigations on silicon-on-insulator (SOI) based infrared (IR) emitter devices heated by employing different kinds of metallic and semiconductor heater materials. Our results clearly reveal the superior high-temperature performance of semiconductor over metallic heater materials. Long-term stable emitter operation in the vicinity of 1300 K could be attained using heavily antimony-doped tin dioxide (SnO2:Sb) heater elements.
KW  - Biosensor
KW  - Hotplate
KW  - heater metallisation
KW  - high-temperature stability
KW  - electro-migration
KW  - doped silicon
KW  - doped metal oxide
KW  - antimony doped tin oxide
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1513
ER  - 
TY  - CHAP
A1  - Katz, Eugenii
A1  - Willner, Itamar
T1  - Magneto-controlled quantized electron transfer to surface-confined redox units and metal nanoparticles
N2  - Hydrophobic magnetic nanoparticles (NPs) consisting of undecanoate-capped magnetite (Fe3O4, average diameter ca. 5 nm) are used to control quantized electron transfer to surface-confined redox units and metal NPs. A two-phase system consisting of an aqueous electrolyte solution and a toluene phase that includes the suspended undecanoatecapped magnetic NPs is used to control the interfacial properties of the electrode surface. The attracted magnetic NPs form a hydrophobic layer on the electrode surface resulting in the change of the mechanisms of the surface-confined electrochemical processes. A quinone-monolayer modified Au electrode demonstrates an aqueous-type of the electrochemical process (2e-+2H+ redox mechanism) for the quinone units in the absence of the hydrophobic magnetic NPs, while the attraction of the magnetic NPs to the surface results in the stepwise single-electron transfer mechanism characteristic of a dry nonaqueous medium. Also, the attraction of the hydrophobic magnetic NPs to the Au electrode surface modified with Au NPs (ca. 1.4 nm) yields a microenvironment with a low dielectric constant that results in the single-electron quantum charging of the Au NPs.
KW  - Biosensor
KW  - Nanoparticles
KW  - magnetic particles
KW  - quantum charging
KW  - modified electrode
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1528
ER  - 
TY  - CHAP
A1  - Pijanowska, Dorota G.
A1  - Remiszewska, Elzbieta
T1  - pH-based detection of phenylalnine by potentiometric and colorimetric methods
N2  - In this paper, methods of sample preparation for potentiometric measurement of phenylalanine are presented. Basing on the spectrophotometric measurements of phenylalanine, the concentrations of reagents of the enzymatic reaction (10 mM L-Phe, 0,4 mM NAD+, 2U L-PheDH) were determined. Then, the absorption spectrum of the reaction product, NADH, was monitored (maximum peak at 340 nm). The results obtained by the spectrophotometric method were compared with the results obtained by the colourimetry, using pH indicators. The above-mentioned two methods will be used as references for potentiometric measurements of phenylalanine concentration.
KW  - Biosensor
KW  - Phenylalanine determination
KW  - enzymatic methods
KW  - pH-based biosensing
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1536
ER  - 
TY  - CHAP
A1  - Arida, Hassan A.
A1  - Kloock, Joachim P.
A1  - Schöning, Michael Josef
T1  - Novel organic membrane-based thin-film microsensors for the determination of heavy metal cations
N2  - A first step towards the fabrication and electrochemical evaluation of thin-film microsensors based on organic PVC membranes for the determination of Hg(II), Cd(II), Pb(II) and Cu(II) ions in solutions has been realised. The membrane-coating mixture used in the preparation of this new type of microsensors is incorporating PVC as supporting matrix, o-nitrophenyloctylether (o-NPOE) as solvent mediator and a recently synthesized Hg[dimethylglyoxime(phene)]2+ and Bis-(4-hydroxyacetophenone)-ethylenediamine as electroactive materials for Hg(II) and Cd(II), respectively. A set of three commercialised ionophores for Cd(II), Pb(II) and Cu(II) has been also used for comparison. Thin-film microsensors based on these membranes showed a Nernstian response of slope (26-30 mV/dec.) for the respective tested cations. The potentiometric response characteristics (linear range, pH range, detection limit and response time) are comparable with those obtained by conventional membranes as well as coated wire electrodes prepared from the same membrane. The realisation of the new organic membrane-based thin-film microsensors overcomes the problem of an insufficient selectivity of solid-state-based thinfilm sensors.
KW  - Biosensor
KW  - Heavy metal detection
KW  - thin-film microsensors
KW  - organic PVC membranes
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1545
ER  - 
TY  - CHAP
A1  - Barek, Jiri
A1  - Fischer, Jan
A1  - Navratil, Tomas
A1  - Peckova, Karolina
A1  - Yosypchuk, Bogdan
T1  - Silver solid amalgam electrodes as sensors for chemical carcinogens
N2  - The applicability of differential pulse voltammetry (DPV) and adsorptive stripping voltammetry (AdSV) at a non-toxic meniscus-modified silver solid amalgam electrode (m-AgSAE) for the determination of trace amounts of genotoxic substances was demonstrated on the determination of micromolar and submicromolar concentrations of 3-nitrofluoranthene using methanol - 0.01 mol L-1 NaOH (9:1) mixture as a base electrolyte and of Ostazine Orange using 0.01 mol L-1 NaOH as a base electrolyte.
KW  - Biosensor
KW  - Solid amalgam electrodes
KW  - voltammetry
KW  - carcinogens
KW  - 3-nitrofluoranthene
KW  - Ostazine Orange
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1554
ER  - 
TY  - CHAP
A1  - Baronas, Romas
A1  - Ivanauskas, Feliksas
A1  - Kulys, Juozas
T1  - Mathematical modeling of biosensors based on an array of enzyme microreactors
N2  - This paper presents a two-dimensional-in-space mathematical model of biosensors based on an array of enzyme microreactors immobilised on a single electrode. The modeling system acts under amperometric conditions. The microreactors were modeled by particles and by strips. The model is based on the diffusion equations containing a nonlinear term related to the Michaelis-Menten kinetics of the enzymatic reaction. The model involves three regions: an array of enzyme microreactors where enzyme reaction as well as mass transport by diffusion takes place, a diffusion limiting region where only the diffusion takes place, and a convective region, where the analyte concentration is maintained constant. Using computer simulation, the influence of the geometry of the microreactors and of the diffusion region on the biosensor response was investigated. The digital simulation was carried out using the finite difference technique.
KW  - Biosensor
KW  - Reaction-diffusion
KW  - modeling biosensor
KW  - microreactor
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1569
ER  - 
TY  - CHAP
A1  - Lei, Yu
A1  - Mulchandani, Priti
A1  - Chen, Wilfred
A1  - Mulchandani, Ashok
T1  - Biosensor for direct determination of fenitrothion and EPN using recombinant Pseudomonas putida JS444 with surface expressed organophosphorus hydrolase. 1. modified clark oxygen electrode
N2  - This paper reports a first microbial biosensor for rapid and cost-effective determination of organophosphorus pesticides fenitrothion and EPN. The biosensor consisted of recombinant PNP-degrading/oxidizing bacteria Pseudomonas putida JS444 anchoring and displaying organophosphorus hydrolase (OPH) on its cell surface as biological sensing element and a dissolved oxygen electrode as the transducer. Surfaceexpressed OPH catalyzed the hydrolysis of fenitrothion and EPN to release 3-methyl-4-nitrophenol and p-nitrophenol, respectively, which were oxidized by the enzymatic machinery of Pseudomonas putida JS444 to carbon dioxide while consuming oxygen, which was measured and correlated to the concentration of organophosphates. Under the optimum operating conditions, the biosensor was able to measure as low as 277 ppb of fenitrothion and 1.6 ppm of EPN without interference from phenolic compounds and other commonly used pesticides such as carbamate pesticides, triazine herbicides and organophosphate pesticides without nitrophenyl substituent. The applicability of the biosensor to lake water was also demonstrated.
KW  - Biosensor
KW  - Organophosphorus
KW  - fenitrothion
KW  - EPN
KW  - biosensor
KW  - Pseudomonas putida
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1573
ER  - 
TY  - CHAP
A1  - Staat, Manfred
T1  - Problems and chances for probabilistic fracture mechanics in the analysis of steel pressure boundary reliability. - Überarb. Ausg.
N2  - In: Technical feasibility and reliability of passive safety systems for nuclear power plants. Proceedings of an Advisory Group Meeting held in Jülich, 21-24 November 1994. - Vienna , 1996. - Seite: 43 - 55 IAEA-TECDOC-920 Abstract: It is shown that the difficulty for probabilistic fracture mechanics (PFM) is the general problem of the high reliability of a small population. There is no way around the problem as yet. Therefore what PFM can contribute to the reliability of steel pressure boundaries is demon­strated with the example of a typical reactor pressure vessel and critically discussed. Although no method is distinguishable that could give exact failure probabilities, PFM has several addi­tional chances. Upper limits for failure probability may be obtained together with trends for design and operating conditions. Further, PFM can identify the most sensitive parameters, improved control of which would increase reliability. Thus PFM should play a vital role in the analysis of steel pressure boundaries despite all shortcomings.
KW  - Bruchmechanik
KW  - probabilistic fracture mechanics
KW  - PFM
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Moreno, Lia
A1  - Dosev, D.
A1  - Bratov, A.
A1  - Dominguez, C.
A1  - Schöning, Michael Josef
A1  - Kloock, Joachim P.
T1  - Effect of electrical properties of the surrounding medium on the response of an interdigitated electrode array with chalcogenide glass film
T2  - XX Eurosensors : 20th anniversary ; Göteborg, Sweden, 17 - 20 September 2006 ; [proceedings]. - Vol. 1
Y1  - 2006
SN  - 978-91-631-9280-7
N1  - Paper number: T1A-P22
SP  - 384
EP  - 385
CY  - Göteborg
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Staat, Manfred
T1  - An electromechanical model for cardiac tissue constructs
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen, 20.07.2015 - 23.07.2015  / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Bhattarai, Aroj
A1  - Frotscher, Ralf
A1  - Staat, Manfred
T1  - Biomechanical study of the female pelvic floor dysfunction using the finite element method
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015  / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Nguyen, N. H.
A1  - Staat, Manfred
T1  - Modeling and simulation of a growing mass by the Smoothed Finite Element Method (SFEM)
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen, Germany, 20.07.2015 - 23.07.2015  / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Pham, Phu Tinh
A1  - Staat, Manfred
T1  - A simplification for shakedown analysis of hardening structures
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Staat, Manfred
ED  - Nithiarasu, Perumal
T1  - Homogenization of a cardiac tissue construct
T2  - CMBE15 : 4th International Conference on Computational & Mathematical Biomedical Engineering ; 29th June - 1st July 2015 ; École Normale Supérieure de Cachan ; Cachan (Paris), France
Y1  - 2015
SN  - 2227-9385
N1  - Konferenzband unter:
http://www.compbiomed.net/getfile.php?type=12/site_documents&id=Proceedings_2227-9385_compressed.pdf
SP  - 645
EP  - 648
PB  - CMBE
CY  - [s.l.]
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Ingebrandt, S.
A1  - Platen, J.
A1  - Schöning, Michael Josef
T1  - Field-effect sensors with charged macromolecules – from micro towards nano aspects
T2  - Biochemical Sensing Utilisation of Micro-and                       Nanotechnologies, Warschau, Nov. 2005 : Lecture Notes of the                       ICB Seminar / ed.: M. Mascini, W. Torbicz
Y1  - 2006
SP  - 74
EP  - 81
PB  - Polish Academy Sciences Press
CY  - Warsaw
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Duong, Minh Tuan
A1  - Staat, Manfred
T1  - Simulating beating cardiomyocytes with electromechanical coupling
T2  - II. International Conference on Biomedical Technology : 28-30 October 2015 Hannover, Germany / T. Lenarz, P. Wriggers (Eds.)
Y1  - 2015
SP  - 1
EP  - 2
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Wendeler, Luisa
A1  - Bromm, Alexander
A1  - Iken, Heiko
A1  - Wagner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Experimental and numerical evaluation of interdigitated electrode array for monitoring gaseous sterilization processes
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - http://dx.doi.org/10.5162/12dss2015/P3.11
SP  - 163
EP  - 168
ER  - 
TY  - CHAP
A1  - Kremers, Alexander
A1  - Pieper, Martin
T1  - Simulation and Verification of Bionic Heat Exchangers with COMSOL Multiphysics® Software
T2  - COMSOL Conference 2015 User Presentations ; COMSOL Conference 2015 Grenoble October 14 - 16, 2015 - World Trade Center, Grenoble, France
Y1  - 2015
PB  - COMSOL
CY  - Göttingen ; Berlin
ER  - 
TY  - CHAP
A1  - Breuer, Lars
A1  - Raue, Markus
A1  - Mang, Thomas
A1  - Schöning, Michael Josef
A1  - Thoelen, Ronald
A1  - Wagner, Torsten
T1  - Light-stimulated hydrogel actuators with incorporated graphene oxide for microfluidic applications
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - http://dx.doi.org/10.5162/12dss2015/P5.8
SP  - 206
EP  - 209
ER  - 
TY  - CHAP
A1  - Jung, Alexander
A1  - Staat, Manfred
A1  - Müller, Wolfram
T1  - Effect of wind on flight style optimisation in ski jumping
T2  - 15th International Symposium on Computer Simulation in Biomechanics ; July 9th-11th 2015, Edinburgh, UK
Y1  - 2016
SP  - 53
EP  - 54
PB  - The University of Edinburgh ; Loughborough University
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Bronder, Thomas
A1  - Wu, Chunsheng
A1  - Schöning, Michael Josef
T1  - Label-free sensing of biomolecules by their intrinsic molecular charge using field-effect devices
T2  - Semiconductor Micro- and Nanoelectonics : Proceedings of the tenth international conference, Yerevan, Armenia, September 11-13
Y1  - 2015
SN  - 978-5-8084-1991-9
SP  - 61
EP  - 63
ER  - 
TY  - CHAP
A1  - Schreiber, Marc
A1  - Kraft, Bodo
A1  - Zündorf, Albert
T1  - Cost-efficient quality assurance of natural language processing tools through continuous monitoring with continuous integration
T2  - 3rd International Workshop on Software Engineering Research and Industrial Practice
Y1  - 2016
U6  - http://dx.doi.org/10.1145/2897022.2897029
N1  - SER&IP’16, May 17 2016, Austin, TX, USA
SP  - 46
EP  - 52
ER  - 
TY  - CHAP
A1  - Bhattarai, Aroj
A1  - Staat, Manfred
ED  - Erni, Daniel
T1  - Female pelvic floor dysfunction: progress weakening of the support system
T2  - 1st YRA MedTech Symposium 2016 : April 8th / 2016 / University of Duisburg-Essen
N2  - The structure of the female pelvic floor (PF) is an inter-related system of bony pelvis,muscles, pelvic organs, fascias, ligaments, and nerves with multiple functions. Mechanically, thepelvic organ support system are of two types: (I) supporting system of the levator ani (LA) muscle,and (II) the suspension system of the endopelvic fascia condensation [1], [2]. Significantdenervation injury to the pelvic musculature, depolimerization of the collagen fibrils of the softvaginal hammock, cervical ring and ligaments during pregnancy and vaginal delivery weakens thenormal functions of the pelvic floor. Pelvic organ prolapse, incontinence, sexual dysfunction aresome of the dysfunctions which increases progressively with age and menopause due toweakened support system according to the Integral theory [3]. An improved 3D finite elementmodel of the female pelvic floor as shown in Fig. 1 is constructed that: (I) considers the realisticsupport of the organs to the pelvic side walls, (II) employs the improvement of our previous FEmodel [4], [5] along with the patient based geometries, (III) incorporates the realistic anatomy andboundary conditions of the endopelvic (pubocervical and rectovaginal) fascia, and (IV) considersvarying stiffness of the endopelvic fascia in the craniocaudal direction [3]. Several computationsare carried out on the presented computational model with healthy and damaged supportingtissues, and comparisons are made to understand the physiopathology of the female PF disorders.
Y1  - 2016
U6  - http://dx.doi.org/10.17185/duepublico/40821
SP  - 11
EP  - 12
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Jung, Alexander
A1  - Staat, Manfred
ED  - Erni, Daniel
T1  - Computing olympic gold: Ski jumping as an example
T2  - 1st YRA MedTech Symposium 2016 : April 8th / 2016 / University of Duisburg-Essen
Y1  - 2016
SN  - 978-3-940402-06-6
U6  - http://dx.doi.org/10.17185/duepublico/40821
SP  - 54
EP  - 55
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Kahmann, Stephanie
A1  - Hackl, Michael
A1  - Wegmann, Kilian
A1  - Müller, Lars-Peter
A1  - Staat, Manfred
ED  - Erni, Daniel
T1  - Impact of a proximal radial shortening osteotomy on the distribution of forces and the stability of the elbow
T2  - 1st YRA MedTech Symposium 2016 : April 8th / 2016 / University of Duisburg-Essen
N2  - The human arm consists of the humerus (upper arm), the medial ulna and the lateral radius (forearm). The joint between the humerus and the ulna is called humeroulnar joint and the joint between the humerus and the radius is called humeroradial joint. Lateral and medial collateral ligaments stabilize the elbow. Statistically, 2.5 out of 10,000 people suffer from radial head fractures [1]. In these fractures the cartilage is often affected. Caused by the injured cartilage, degenerative diseases like posttraumatic arthrosis may occur. The resulting pain and reduced range of motion have an impact on the patient’s quality of life. Until now, there has not been a treatment which allows typical loads in daily life activities and offers good long-term results. A new surgical approach was developed with the motivation to reduce the progress of the posttraumatic arthrosis. Here, the radius is shortened by 3 mm in the proximal part [2]. By this means, the load of the radius is intended to be reduced due to a load shift to the ulna. Since the radius is the most important stabilizer of the elbow it has to be confirmed that the stability is not affected. In the first test (Fig. 1 left), pressure distributions within the humeroulnar and humeroradial joints a native and a shortened radius were measured using resistive pressure sensors (I5076 and I5027, Tekscan, USA). The humerus was loaded axially in a tension testing machine (Z010, Zwick Roell, Germany) in 50 N steps up to 400 N. From the humerus the load is transmitted through both the radius and the ulna into the hand which is fixed on the ground. In the second test (Fig. 1 right), the joint stability was investigated using a digital image correlation system to measure the displacement of the ulna. Here, the humerus is fixed with a desired flexion angle and the unconstrained forearm lies on the ground. A rope connects the load actuator with a hook fixed in the ulna. A guide roller is used so that the rope pulls the ulna horizontally when a tensile load is applied. This creates a moment about the elbow joint with a maximum value of 7.5 Nm. Measurements were performed with varying flexion angles (0°, 30°, 60°, 90°, 120°). For both tests and each measurement, seven specimens were used. Student ́s t-test was employed to determine whether the mean values of the measurements in native specimen and operated specimens differ significantly.
Y1  - 2016
U6  - http://dx.doi.org/10.17185/duepublico/40821
SP  - 7
EP  - 8
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Duong, Minh Tuan
T1  - Smoothed Finite Element Methods for Nonlinear Solid Mechanics Problems: 2D and 3D Case Studies
T2  - Proceedings of the National Science and Technology Conference on Mechanical - Transportation Engineering (NSCMET 2016), 13th October 2016, Hanoi, Vietnam, Vol.2
N2  - The Smoothed Finite Element Method (SFEM) is presented as an edge-based and a facebased techniques for 2D and 3D boundary value problems, respectively. SFEMs avoid shortcomings of the standard Finite Element Method (FEM) with lower order elements such as overly stiff behavior, poor stress solution, and locking effects. Based on the idea of averaging spatially the standard strain field of the FEM over so-called smoothing domains SFEM calculates the stiffness matrix for the same number of degrees of freedom (DOFs) as those of the FEM. However, the SFEMs significantly improve accuracy and convergence even for distorted meshes and/or nearly incompressible materials.
Numerical results of the SFEMs for a cardiac tissue membrane (thin plate inflation) and an artery (tension of 3D tube) show clearly their advantageous properties in improving accuracy particularly for the distorted meshes and avoiding shear locking effects.
Y1  - 2016
SP  - 440
EP  - 445
ER  - 
TY  - CHAP
A1  - Tran, Ngoc Trinh
A1  - Tran, Thanh Ngoc
A1  - Matthies, Hermann G.
A1  - Stavroulakis, Georgios Eleftherios
A1  - Staat, Manfred
T1  - FEM Shakedown of uncertain structures by chance constrained programming
T2  - PAMM Proceedings in Applied Mathematics and Mechanics
Y1  - 2016
U6  - http://dx.doi.org/10.1002/pamm.201610346
SN  - 1617-7061
N1  - Special Issue:
Joint 87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) and Deutsche Mathematiker-Vereinigung
VL  - 16
IS  - 1
SP  - 715
EP  - 716
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Jung, Alexander
A1  - Frotscher, Ralf
A1  - Staat, Manfred
ED  - Papadrakakis, M.
T1  - A 3D electromechanical FEM-based model for cardiac tissue
T2  - ECCOMAS Congress 2016, VII European Congress on Computational Methods in Applied Sciences and Engineering. Crete Island, Greece, 5–10 June 2016
Y1  - 2016
N1  - revised after the conference
P11367
ER  - 
TY  - CHAP
A1  - Tran, Ngoc Trinh
A1  - Tran, Thanh Ngoc
A1  - Matthies, H. G.
A1  - Stavroulakis, G. E.
A1  - Staat, Manfred
ED  - Papadrakakis, M.
T1  - Shakedown analysis of plate bending analysis under stochastic uncertainty by chance constrained programming
T2  - ECCOMAS Congress 2016, VII European Congress on Computational Methods in Applied Sciences and Engineering. Crete Island, Greece, 5–10 June 2016
Y1  - 2016
ER  - 
TY  - CHAP
A1  - Bhattarai, Aroj
A1  - Frotscher, Ralf
A1  - Staat, Manfred
ED  - Natal Jorge, Renato
T1  - Significance of fibre geometry on passive-active response of pelvic muscles to evaluate pelvic dysfunction
T2  - BioMedWomen: Proceedings of the international conference on clinical and bioengineering for women's health
Y1  - 2016
SN  - 978-1-138-02910-1
SP  - 185
EP  - 188
PB  - CRC Press
CY  - Boca Raton
ER  - 
TY  - CHAP
A1  - Bäcker, Matthias
A1  - Koch, C.
A1  - Geiger, F.
A1  - Eber, F.
A1  - Gliemann, H.
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - A New Class of Biosensors Based on Tobacco Mosaic Virus and Coat Proteins as Enzyme Nanocarrier
T2  - Procedia Engineering
Y1  - 2016
U6  - http://dx.doi.org/10.1016/j.proeng.2016.11.228
SN  - 1877-7058
N1  - Proceedings of the 30th anniversary Eurosensors Conference – Eurosensors 2016, 4-7. Sepember 2016, Budapest, Hungary
VL  - Vol. 168
SP  - 618
EP  - 621
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Bronder, Thomas
A1  - Scheja, S.
A1  - Wu, Chunsheng
A1  - Metzger-Boddien, C.
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Label-free Electrostatic Detection of DNA Amplification by PCR Using Capacitive Field-effect Devices
T2  - Procedia Engineering
N2  - A capacitive field-effect EIS (electrolyte-insulator-semiconductor) sensor modified with a positively charged weak polyelectrolyte of poly(allylamine hydrochloride) (PAH)/single-stranded probe DNA (ssDNA) bilayer has been used for a label-free electrostatic detection of pathogen-specific DNA amplification via polymerase chain reaction (PCR). The sensor is able to distinguish between positive and negative PCR solutions, to detect the existence of target DNA amplicons in PCR samples and thus, can be used as tool for a quick verification of DNA amplification and the successful PCR process.
Y1  - 2016
U6  - http://dx.doi.org/10.1016/j.proeng.2016.11.512
SN  - 1877-7058
N1  - Proceedings of the 30th anniversary Eurosensors Conference – Eurosensors 2016, 4-7. Sepember 2016, Budapest, Hungary
VL  - Vol. 168
SP  - 514
EP  - 517
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Goldmann, Jan-Peter
A1  - Braunstein, Bjoern
A1  - Heinrich, Kai
A1  - Sanno, Maximilian
A1  - Stäudle, Benjamin
A1  - Ritzdorf, Wolfgang
A1  - Brüggemann, Gert-Peter
A1  - Albracht, Kirsten
T1  - Joint work of the take-off leg during elite high jump
T2  - Proceedings of the 33th International Conference on Biomechanics in Sports (ISBS)
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Droszez, Anna
A1  - Sanno, Maximilian
A1  - Goldmann, Jan-Peter
A1  - Albracht, Kirsten
A1  - Brüggemann, Gerd-Peter
A1  - Braunstein, Bjoern
T1  - Differences between take-off behavior during vertical jumps and two artistic elements
T2  - 34th International Conference of Biomechanics in Sport, Tsukuba, Japan, July 18-22, 2016
Y1  - 2016
SN  - 1999-4168
SP  - 577
EP  - 580
ER  - 
TY  - CHAP
A1  - Abel, Thomas
A1  - Bonin, Dominik
A1  - Albracht, Kirsten
A1  - Zeller, Sebastian
A1  - Brüggemann, Gert-Peter
A1  - Burkett, Brendan
A1  - Strüder, Heiko K.
T1  - Kinematic profile of the elite handcyclist
T2  - 28th  International Conference on Biomechanics in Sports, Marquette, Michigan, USA, July 19 – 23, 2010
Y1  - 2017
SN  - 1999-4168
SP  - 140
EP  - 141
ER  - 
TY  - CHAP
A1  - Braunstein, Bjoern
A1  - Goldmann, Jan-Peter
A1  - Albracht, Kirsten
A1  - Sanno, Maximilian
A1  - Willwacher, Steffen
A1  - Heinrich, Kai
A1  - Herrmann, Volker
A1  - Brüggemann, Gert-Peter
T1  - Joint specific contribution of mechanical power and work during acceleration and top speed in elite sprinters
T2  - 31 International Conference on Biomechanics in Sports, Taipei, Taiwan, July 07 - July 22, 2013
Y1  - 2013
SN  - 1999-4168
ER  - 
TY  - CHAP
A1  - Kolditz, Melanie
A1  - Albracht, Kirsten
A1  - Fasse, Alessandro
A1  - Albin, Thivaharan
A1  - Brüggemann, Gert-Peter
A1  - Abel, Dirk
T1  - Evaluation of an industrial robot as a leg press training device
T2  - XV International Symposium on Computer Simulation in Biomechanics July 9th – 11th 2015, Edinburgh, UK
Y1  - 2015
SP  - 41
EP  - 42
ER  - 
TY  - CHAP
A1  - Kolditz, Melanie
A1  - Albin, Thivaharan
A1  - Fasse, Alessandro
A1  - Brüggemann, Gert-Peter
A1  - Abel, Dirk
A1  - Albracht, Kirsten
T1  - Simulative Analysis of Joint Loading During Leg Press Exercise for Control Applications
T2  - IFAC-PapersOnLine
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.ifacol.2015.10.179
N1  - IFAC-PapersOnLine 48-20;
Conference Paper Archive
VL  - 48
IS  - 20
SP  - 435
EP  - 440
ER  - 
TY  - CHAP
A1  - Schreiber, Marc
A1  - Kraft, Bodo
A1  - Zündorf, Albert
T1  - Metrics Driven Research Collaboration: Focusing on Common Project Goals Continuously
T2  - 39th International Conference on Software Engineering, May 20-28, 2017 - Buenos Aires, Argentina
N2  - Research collaborations provide opportunities for both practitioners and researchers: practitioners need solutions for difficult business challenges and researchers are looking for hard problems to solve and publish. Nevertheless, research collaborations carry the risk that practitioners focus on quick solutions too much and that researchers tackle theoretical problems, resulting in products which do not fulfill the project requirements.
In this paper we introduce an approach extending the ideas of agile and lean software development. It helps practitioners and researchers keep track of their common research collaboration goal: a scientifically enriched software product which fulfills the needs of the practitioner’s business model.
This approach gives first-class status to application-oriented metrics that measure progress and success of a research collaboration continuously. Those metrics are derived from the collaboration requirements and help to focus on a commonly defined goal.
An appropriate tool set evaluates and visualizes those metrics with minimal effort, and all participants will be pushed to focus on their tasks with appropriate effort. Thus project status, challenges and progress are transparent to all research collaboration members at any time.
Y1  - 2017
N1  - Software Engineering in Practice (SEIP).
ICSE2017
Vorabversion der Autoren
ER  -