TY  - CHAP
A1  - Dachwald, Bernd
A1  - Ulamec, Stephan
A1  - Biele, Jens
T1  - Clean in situ subsurface exploration of icy environments in the solar system
T2  - Habitability of other planets and satellites. - (Cellular origin, life in extreme habitats and astrobiology ; 28)
N2  - "To assess the habitability of the icy environments in the solar system, for example, on Mars, Europa, and Enceladus, the scientific analysis of material embedded in or underneath their ice layers is very important. We consider self-steering robotic ice melting probes to be the best method to cleanly access these environments, that is, in compliance with planetary protection standards. The required technologies are currently developed and tested."
Y1  - 2013
SN  - 978-94-007-6545-0 (Druckausgabe)
SN  - 978-94-007-6546-7 (E-Book)
SP  - 367
EP  - 397
PB  - Springer
CY  - Dordrecht
ER  - 
TY  - CHAP
A1  - Wahle, Michael
T1  - Calculation of the response of heat exchanger tubes with regard to nonlinear and prestressing effects
T2  - Vibration in nuclear plant : proceedings of the 3rd International Conference on Vibration in Nuclear Plant held on 11 - 14 May 1982, Keswick ; vol. 1
Y1  - 1983
SN  - 0-7277-0192-4 (Druckausg.)
SN  - 978-0-7277-5270-3 (E-Book)
N1  - International Conference on Vibration in Nuclear Plant <3, 1982, Keswick>
N1  - Paper 1.10 (Log No. 71)
SP  - 162
EP  - 183
PB  - British Nuclear Energy Society
CY  - London
ER  - 
TY  - CHAP
A1  - Wahle, Michael
T1  - Determination of flow induced nonlinear vibrations of prestressed heat exchanger tubes
T2  - Advanced Course in Heat Exchangers : Theory and Practice ; ICHMT Symposium ; Dubrovnik, Croatia 1981. - (ICHMT digital library online ; 19)
Y1  - 1983
SP  - 339
EP  - 353
PB  - Begell House
CY  - Redding, Connecticut
ER  - 
TY  - CHAP
A1  - Hoefling, J.
A1  - Schirra, Julian
A1  - Spohr, A.
A1  - Schäfer, D.
T1  - Induced drag computation with wake model schemes for highly non-planar wing systems
T2  - Deutscher Luft- und Raumfahrtkongress 2013 : 10.9. - 12.9.2013, Stuttgart
Y1  - 2013
SP  - 1
EP  - 10
PB  - Dt. Ges. für Luft- und Raumfahrt
CY  - Bonn
ER  - 
TY  - JOUR
A1  - Krämer, Stefan
A1  - Daab, Dominique Jonas
A1  - Müller, Brigitte
A1  - Wagner, Tobias
A1  - Baader, Fabian
A1  - Hessel, Joana
A1  - Gdalewitsch, Georg
A1  - Plescher, Engelbert
A1  - Dachwald, Bernd
A1  - Wahle, Michael
A1  - Gierse, Andreas
A1  - Vetter, Rudolf
A1  - Pfützenreuter, Lysan
T1  - Development and flight-testing of a system to isolate vibrations for microgravity experiments on sounding rockets
JF  - 21st ESA Symposium on Rocket and Balloon Research
Y1  - 2013
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Spohr, A.
A1  - Schirra, Julian
A1  - Hoefling, J.
A1  - Schedl, A.
T1  - Wing weight estimation methodology for highly non-planar lifting systems during conceptual design
T2  - Deutscher Luft- und Raumfahrtkongress 2013 : 10.9. - 12.9.2013, Stuttgart
Y1  - 2013
SP  - Publ. online
ER  - 
TY  - CHAP
A1  - Wolff, Nino
A1  - Seefeldt, Patric
A1  - Bauer, Wolfgang
A1  - Fiebig, Christopher
A1  - Gerding, Patrick
A1  - Parow-Souchon, Kai
A1  - Pongs, Anna
A1  - Reiffenrath, Matti
A1  - Ziemann, Thomas
T1  - Alternative application of solar sail technology
T2  - Advances in solar sailing
N2  - The development of Gossamer sail structures for solar sails contributes to a large field of future space applications like thin film solar generators, membrane antennas and drag sails. The focus of this paper is the development of a drag sail based on solar sail technology that could contribute to a reduction of space debris in low Earth orbits. The drag sail design and its connections to solar sail development, a first test on a sounding rocket, as well as the ongoing integration of the drag sail into a triple CubeSat is presented.
Y1  - 2014
SN  - 978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)
U6  - http://dx.doi.org/10.1007/978-3-642-34907-2_23
SP  - 351
EP  - 365
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Peeken, Heinz
A1  - Troeder, Christoph
A1  - Schmidt, J.
A1  - Rosenkranz, Josef
T1  - Principles of machine noise reduction
T2  - Inter-noise 85 : proceedings ; 1985 international conference on noise control engineering ; Munich, Sept. 18 - 20, 1985. - (Schriftenreihe der Bundesanstalt für Arbeitsschutz : Tagungsbericht ; 39)
Y1  - 1985
SN  - 3-88314-417-7
SP  - 23
EP  - 36
PB  - Bundesanstalt für Arbeitsschutz [u.a.]
CY  - Dortmund [u.a.]
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Boehnhardt, Herrmann
A1  - Broj, Ulrich
A1  - Geppert, Ulrich R. M. E.
A1  - Grundmann, Jan-Thimo
A1  - Seboldt, Wolfgang
A1  - Seefeldt, Patric
A1  - Spietz, Peter
A1  - Johnson, Les
A1  - Kührt, Ekkehard
A1  - Mottola, Stefano
A1  - Macdonald, Malcolm
A1  - McInnes, Colin R.
A1  - Vasile, Massimiliano
A1  - Reinhard, Ruedeger
T1  - Gossamer roadmap technology reference study for a multiple NEO Rendezvous Mission
T2  - Advances in solar sailing
N2  - A technology reference study for a multiple near-Earth object (NEO) rendezvous mission with solar sailcraft is currently carried out by the authors of this paper. The investigated mission builds on previous concepts, but adopts a strong micro-spacecraft philosophy based on the DLR/ESA Gossamer technology. The main scientific objective of the mission is to explore the diversity of NEOs. After direct interplanetary insertion, the solar sailcraft should—within less than 10 years—rendezvous three NEOs that are not only scientifically interesting, but also from the point of human spaceight and planetary defense. In this paper, the objectives of the study are outlined and a preliminary potential mission profile is presented.
Y1  - 2014
SN  - 978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)
SP  - 211
EP  - 226
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - CHAP
A1  - McInnes, Colin R.
A1  - Bothmer, Volker
A1  - Dachwald, Bernd
A1  - Geppert, Ulrich R. M. E.
A1  - Heiligers, Jeannette
A1  - Hilgers, Alan
A1  - Johnson, Les
A1  - Macdonald, Malcolm
A1  - Reinhard, Ruedeger
A1  - Seboldt, Wolfgang
A1  - Spietz, Peter
T1  - Gossamer roadmap technology reference study for a Sub-L1 Space Weather Mission
T2  - Advances in solar sailing
N2  - A technology reference study for a displaced Lagrange point space weather mission is presented. The mission builds on previous concepts, but adopts a strong micro-spacecraft philosophy to deliver a low mass platform and payload which can be accommodated on the DLR/ESA Gossamer-3 technology demonstration mission. A direct escape from Geostationary Transfer Orbit is assumed with the sail deployed after the escape burn. The use of a miniaturized, low mass platform and payload then allows the Gossamer-3 solar sail to potentially double the warning time of space weather events. The mission profile and mass budgets will be presented to achieve these ambitious goals.
Y1  - 2014
SN  - 978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)
SP  - 227
EP  - 242
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - CHAP
A1  - Macdonald, Malcolm
A1  - McGrath, C.
A1  - Appourchaux, T.
A1  - Dachwald, Bernd
A1  - Finsterle, W.
A1  - Gizon, L.
A1  - Liewer, P. C.
A1  - McInnes, Colin R.
A1  - Mengali, G.
A1  - Seboldt, W.
A1  - Sekii, T.
A1  - Solanki, S. K.
A1  - Velli, M.
A1  - Wimmer-Schweingruber, R. F.
A1  - Spietz, Peter
A1  - Reinhard, Ruedeger
ED  - Macdonald, Malcolm
T1  - Gossamer roadmap technology reference study for a solar polar mission
T2  - Advances in solar sailing
N2  - A technology reference study for a solar polar mission is presented. The study uses novel analytical methods to quantify the mission design space including the required sail performance to achieve a given solar polar observation angle within a given timeframe and thus to derive mass allocations for the remaining spacecraft sub-systems, that is excluding the solar sail sub-system. A parametric, bottom-up, system mass budget analysis is then used to establish the required sail technology to deliver a range of science payloads, and to establish where such payloads can be delivered to within a given timeframe. It is found that a solar polar mission requires a solar sail of side-length 100–125 m to deliver a ‘sufficient value’ minimum science payload, and that a 2.5 μm sail film substrate is typically required, however the design is much less sensitive to the boom specific mass.
Y1  - 2014
SN  - 978-3-642-34906-5
U6  - http://dx.doi.org/10.1007/978-3-642-34907-2_17
SP  - 243
EP  - 257
PB  - Springer
CY  - Berlin, Heidelberg
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Dickhoff, J.
A1  - Keinz, Jan
A1  - Anis, H. A.
A1  - Parente, A.
A1  - Hendrick, P.
T1  - Experimental and numerical study of the micromix combustion principle applied for hydrogen and hydrogen-rich syngas as fuel with increased energy density for industrial gas turbine applications
JF  - Energy procedia
N2  - The Dry Low NOx (DLN) Micromix combustion principle with increased energy density is adapted for the industrial gas turbine APU GTCP 36-300 using hydrogen and hydrogen-rich syngas with a composition of 90%-Vol. hydrogen (H₂) and 10%-Vol. carbon-monoxide (CO). Experimental and numerical studies of several combustor geometries for hydrogen and syngas show the successful advance of the DLN Micromix combustion from pure hydrogen to hydrogen-rich syngas. The impact of the different fuel properties on the combustion principle and aerodynamic flame stabilization design laws, flow field, flame structure and emission characteristics is investigated by numerical analysis using a hybrid Eddy Break Up combustion model and validated against experimental results.
Y1  - 2014
U6  - http://dx.doi.org/10.1016/j.egypro.2014.12.201
SN  - 1876-6102 (E-Journal)
IS  - 61
SP  - 1736
EP  - 1739
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Schirra, Julian
A1  - Watmuff, Jonathan
A1  - Bauschat, J.-Michael
T1  - Highly non-planar lifting systems: a relative assessment of existing potential-methodologies to accurately estimate the induced drag
JF  - 32nd  AIAA Applied Aerodynamics Conference 2014 : June, 16-20 2014, Atlanta, Ga.
Y1  - 2014
SN  - 978-1-62410-288-2
U6  - http://dx.doi.org/10.2514/6.2014-2988
SP  - Publ. online
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Börner, Sebastian
A1  - Haj Ayed, A.
A1  - Kusterer, K.
A1  - Tekin, N.
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
ED  - Song, Seung Jin
T1  - Experimental and numerical characterization of the dry low NOx micromix hydrogen combustion principle at increased energy density for industrial hydrogen gas turbine applications
T2  - Combustion, fuels and emissions : proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition - 2013 ; June 3 - 7, 2013, San Antonio, Texas, USA ; vol. 1
Y1  - 2013
SN  - 978-0-7918-5510-2
N1  - Paper No: GT2013-94771
SP  - V001T04A055
PB  - ASME
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Schirra, Julian
A1  - J., Watmuff
T1  - Euler-based induced drag estimation for highly non-planar lifting systems during conceptional design
T2  - 62. Deutscher Luft- und Raumfahrtkongress 2013 : 10. - 12. September 2032, Stuttgart, Haus der Wirtschaft
Y1  - 2013
SP  - 1
EP  - 8
PB  - Dt. Gesellschaft für Luft- und Raumfahrt
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Niedermeier, H.
A1  - Clemens, J.
A1  - Kowalski, Julia
A1  - Macht, S.
A1  - Heinen, D.
A1  - Hoffmann, R.
A1  - Linder, Peter
T1  - Navigation system for a research ice probe for antarctic glaciers
T2  - IEEE/ION Position, Location and Navigation Symposium (PLANS) ; 5-8 May 2014, Monterey, Calif.
Y1  - 2014
SN  - 978-1-4799-3319-8
SP  - 959
EP  - 975
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Stadler, Alexander Maximilian
A1  - Garvey, Christopher J.
A1  - Embs, Jan Peter
A1  - Koza, Michael Marek
A1  - Unruh, Tobias
A1  - Artmann, Gerhard
A1  - Zaccai, Guiseppe
T1  - Picosecond dynamics in haemoglobin from different species: A quasielastic neutron scattering study
JF  - Biochimica et biophysica acta (BBA): General Subjects
Y1  - 2014
U6  - http://dx.doi.org/10.1016/j.bbagen.2014.06.007
SN  - 1872-8006 (E-Journal); 0304-4165 (Print)
VL  - 1840
IS  - 10
SP  - 2989
EP  - 2999
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Konstantinidis, K.
A1  - Dachwald, Bernd
A1  - Ohndorf, A.
A1  - Dykta, P.
A1  - Voigt, K.
A1  - Förstner, R.
T1  - Enceladus explorer (ENEX): A lander mission to probe subglacial water pockets on Saturn's moon enceladus for life
T2  - 64th International Astronautical Congress 2013 (IAC 2013) : Beijing, China, 23 - 27 September 2013. (Proceedings of the International Astronautical Congress, IAC ; 2)
Y1  - 2013
SN  - 978-1-62993-909-4
SP  - 1340
EP  - 1350
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Feldmann, Marco
A1  - Espe, Clemens
A1  - Plescher, Engelbert
A1  - Konstantinidis, K.
A1  - Forstner, R.
T1  - Enceladus explorer - A maneuverable subsurface probe for autonomous navigation through deep ice
T2  - 63rd International Astronautical Congress 2012, IAC 2012; Naples; Italy; 1 October 2012 through 5 October 2012. (Proceedings of the International Astronautical Congress, IAC ; 3)
Y1  - 2012
SN  - 978-1-62276-979-7
SP  - 1756
EP  - 1766
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Schirra, Julian
A1  - Watmuff, Jon
A1  - Bauschat, J.-Michael
T1  - A relative assessment of existing potential-methodologies to accurately estimate the induced drag of highly non-planar lifting systems
T2  - Advanced aero concepts, design and operations : Applied Aerodynamics Conference  : July 22 -24, 2014, Bristol, UK
Y1  - 2014
SP  - 1
EP  - 13
ER  - 
TY  - JOUR
A1  - Konstantinidis, Konstantinos
A1  - Flores Martinez, Claudio
A1  - Dachwald, Bernd
A1  - Ohndorf, Andreas
A1  - Dykta, Paul
A1  - Bowitz, Pascal
A1  - Rudolph, Martin
A1  - Digel, Ilya
A1  - Kowalski, Julia
A1  - Voigt, Konstantin
A1  - Förstner, Roger
T1  - A lander mission to probe subglacial water on Saturn's moon enceladus for life
JF  - Acta astronautica
Y1  - 2015
SN  - 1879-2030 (E-Journal); 0094-5765 (Print)
VL  - Vol. 106
SP  - 63
EP  - 89
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Mertens, Josef
ED  - Nitsche, Wolfgang
T1  - Some important results of the technology programme RaWid
T2  - New Results in Numerical and Experimental Fluid Mechanics : Contributions to the 11th AG STAB/DGLR Symposium Berlin, Germany 1998. - Vol. 2. - (Notes on Numerical Fluid Mechanics ; 72)
Y1  - 1999
SN  - 978-3-663-10903-7 (Print)
SN  - 978-3-663-10901-3 (Elektronisch)
U6  - http://dx.doi.org/10.1007/978-3-663-10901-3_41
SP  - 315
EP  - 322
PB  - Springer Fachmedien
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Haj Ayed, A.
A1  - Kusterer, K.
A1  - Keinz, Jan
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Numerical Study on Increased Energy Density for the DLN Micromix Hydrogen Combustion Principle
T2  - Combustion, Fuels and Emissions (ASME Turbo Expo 2014: Turbine Technical Conference and Exposition : Düsseldorf, Germany, June 16–20, 2014 ; Vol. 4A)
Y1  - 2014
SN  - 978-0-7918-4568-4
N1  - Paper No. GT2014-25848
SP  - V04AT04A057
PB  - ASME
CY  - New York, N.Y.
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - Mikucki, Jill
A1  - Tulaczyk, Slawek
A1  - Digel, Ilya
A1  - Espe, Clemens
A1  - Feldmann, Marco
A1  - Francke, Gero
A1  - Kowalski, Julia
A1  - Xu, Changsheng
T1  - IceMole : A maneuverable probe for clean in situ analysis and sampling of subsurface ice and subglacial aquatic ecosystems
JF  - Annals of Glaciology
N2  - There is significant interest in sampling subglacial environments for geobiological studies, but they are difficult to access. Existing ice-drilling technologies make it cumbersome to maintain microbiologically clean access for sample acquisition and environmental stewardship of potentially fragile subglacial aquatic ecosystems. The IceMole is a maneuverable subsurface ice probe for clean in situ analysis and sampling of glacial ice and subglacial materials. The design is based on the novel concept of combining melting and mechanical propulsion. It can change melting direction by differential heating of the melting head and optional side-wall heaters. The first two prototypes were successfully tested between 2010 and 2012 on glaciers in Switzerland and Iceland. They demonstrated downward, horizontal and upward melting, as well as curve driving and dirt layer penetration. A more advanced probe is currently under development as part of the Enceladus Explorer (EnEx) project. It offers systems for obstacle avoidance, target detection, and navigation in ice. For the EnEx-IceMole, we will pay particular attention to clean protocols for the sampling of subglacial materials for biogeochemical analysis. We plan to use this probe for clean access into a unique subglacial aquatic environment at Blood Falls, Antarctica, with return of a subglacial brine sample.
KW  - Antarctic Glaciology
KW  - Extraterrestrial Glaciology
KW  - Glaciological instruments and methods
KW  - Subclacial exploration
KW  - Subglacial lakes
Y1  - 2014
U6  - http://dx.doi.org/10.3189/2014AoG65A004
SN  - 1727-5644
VL  - 55
IS  - 65
SP  - 14
EP  - 22
PB  - Cambridge University Press
CY  - Cambridge
ER  - 
TY  - BOOK
A1  - Benkö, Marietta
A1  - Plescher, Engelbert
T1  - Space law: reconsidering the definition/delimitation question and the passage of spacecraft through foreign airspace. (Essential air and space law ; 12)
Y1  - 2013
SN  - 9789462360761 ; 9462360766  ; 9789460948176
PB  - Eleven International Publishing
CY  - The Hague
ER  - 
TY  - CHAP
A1  - Plescher, Engelbert
A1  - Mathiak, Gerhard
A1  - Willnecker, Rainer
T1  - Technical aspects of liquid diffusion model experiments
T2  - 55th International Astronautical Congress : October 4 - 8, 2004, Vancouver, Canada / International Astronautical Federation. Bd. 8. IAC-04-J.5.04
Y1  - 2005
SP  - 5019
EP  - 5025
PB  - International Astronautical Federation
CY  - Paris
ER  - 
TY  - JOUR
A1  - Mathiak, Gerhard
A1  - Plescher, Engelbert
A1  - Willnecker, Rainer
T1  - Liquid metal diffusion experiments in microgravity - Vibrational effects
JF  - Measurement science and technology
Y1  - 2005
U6  - http://dx.doi.org/10.1088/0957-0233/16/2/003
SN  - 0957-0233
VL  - Vol. 16
IS  - No. 2
SP  - 336
ER  - 
TY  - JOUR
A1  - Mathiak, Gerhard
A1  - Willnecker, Rainer
A1  - Plescher, Engelbert
T1  - Vibrational effects on diffusion experiments
JF  - Microgravity science and technology : international journal for microgravity research and applications
Y1  - 2005
SN  - 0938-0108
VL  - Vol. 15
IS  - No. 1
SP  - 295
EP  - 300
ER  - 
TY  - THES
A1  - Börner, Sebastian
T1  - Optimization and testing of a low NOx hydrogen fuelled gas turbine
Y1  - 2013
N1  - Zugl.: Bruxelles, Université libre, Diss., 2013
PB  - Université Libre de Bruxelles
CY  - Bruxelles
ER  - 
TY  - JOUR
A1  - Seifarth, Volker
A1  - Goßmann, Matthias
A1  - Grosse, J. O.
A1  - Becker, C.
A1  - Heschel, I.
A1  - Artmann, Gerhard
A1  - Temiz Artmann, Aysegül
T1  - Development of a Bioreactor to Culture Tissue Engineered Ureters Based on the Application of Tubular OPTIMAIX 3D Scaffolds
JF  - Urologia Internationalis
Y1  - 2015
U6  - http://dx.doi.org/10.1159/000368419
SN  - 0042-1138
VL  - 2015
IS  - 95
SP  - 106
EP  - 113
PB  - Karger
CY  - Basel
ER  - 
TY  - CHAP
A1  - Bagheri, Mohsen
A1  - Schleupen, Josef
A1  - Dahmann, Peter
A1  - Kallweit, Stephan
T1  - A multi-functional device applying for the safe maintenance at high-altitude on wind turbines
T2  - 20th International Conference on Composite Materials : Copenhagen, 19 - 24th July 2015
Y1  - 2015
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Busse, Daniel
A1  - Esch, Thomas
A1  - Muntaniol, Roman
T1  - Thermal management in E-carsharing vehicles - preconditioning concepts of passenger compartments
T2  - E-Mobility in Europe : trends and good practice
N2  - The issue of thermal management in electric vehicles includes the topics of drivetrain cooling and heating, interior temperature, vehicle body conditioning and safety. In addition to the need to ensure optimal thermal operating conditions of the drivetrain components (drive motor, battery and electrical components), thermal comfort must be provided for the passengers. Thermal comfort is defined as the feeling which expresses the satisfaction of the passengers with the ambient conditions in the compartment. The influencing factors on thermal comfort are the temperature and humidity as well as the speed of the indoor air and the clothing and the activity of the passengers, in addition to the thermal radiation and the temperatures of the interior surfaces. The generation and the maintenance of free visibility (ice- and moisture-free windows) count just as important as on-demand heating and cooling of the entire vehicle. A Carsharing climate concept of the innovative ec2go vehicle stipulates and allows for only seating areas used by passengers to be thermally conditioned in a close-to-body manner. To enable this, a particular feature has been added to the preconditioning of the Carsharing electric vehicle during the electric charging phase at the parking station.
KW  - Carsharing
KW  - Thermal management
KW  - Thermal comfort
KW  - Electrical vehicle
KW  - Passenger compartment
Y1  - 2015
SN  - 978-3-319-13193-1
U6  - http://dx.doi.org/10.1007/978-3-319-13194-8_18
SP  - 327
EP  - 343
PB  - Springer
CY  - Cham [u.a.]
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, K.
A1  - Haj Ayed, A.
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Experimental and Numerical Study on Optimizing the DLN Micromix Hydrogen Combustion Principle for Industrial Gas Turbine Applications
T2  - ASME Turbo Expo 2015: Turbine Technical Conference and Exposition Volume 4A: Combustion, Fuels and Emissions Montreal, Quebec, Canada, June 15–19, 2015
Y1  - 2015
SN  - 978-0-7918-5668-0
U6  - http://dx.doi.org/10.1115/GT2015-42043
SP  - V04AT04A008
ER  - 
TY  - JOUR
A1  - Haj Ayed, A.
A1  - Kusterer, K.
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Striegan, Constantin
A1  - Bohn, D.
T1  - Experimental and numerical investigations of the dry-low-NOx hydrogen micromix combustion chamber of an industrial gas turbine
JF  - Propulsion and power research
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.jppr.2015.07.005
SN  - 2212-540X
VL  - Vol. 4
IS  - Iss. 3
SP  - 123
EP  - 131
ER  - 
TY  - JOUR
A1  - Haj Ayed, A.
A1  - Kusterer, K.
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Striegan, Constantin
A1  - Bohn, D.
T1  - Improvement study for the dry-low-NOx hydrogen micromix combustion technology
JF  - Propulsion and power research
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.jppr.2015.07.003
SN  - 2212-540X
VL  - Vol. 4
IS  - Iss. 3
SP  - 132
EP  - 140
ER  - 
TY  - CHAP
A1  - Neu, Eugen
A1  - Janser, Frank
A1  - Khatibi, Akbar A.
A1  - Orifici, Adrian C.
T1  - Operational modal analysis of a cantilever in a wind tunnel using optical fiber bragg grating sensors
T2  - 6th International Operational Modal Analysis Conference. IOMAC´15. 2015 May 12-14 Gijon - Spain
Y1  - 2015
U6  - http://dx.doi.org/10.13140/RG.2.1.3753.0324
ER  - 
TY  - JOUR
A1  - Bindal, Gaurav
A1  - Sharma, Sparsh
A1  - Janser, Frank
A1  - Neu, Eugen
T1  - Detailed analysis of variables affecting wing kinematics of bat flight
JF  - SAE International Journal of Aerospace
Y1  - 2013
U6  - http://dx.doi.org/10.4271/2013-01-9003
SN  - 1946-3901
VL  - 6
IS  - 2
SP  - 811
EP  - 818
ER  - 
TY  - JOUR
A1  - Kowalski, Julia
A1  - Linder, Peter
A1  - Zierke, S.
A1  - Wulfen, B. van
A1  - Clemens, J.
A1  - Konstantinidis, K.
A1  - Ameres, G.
A1  - Hoffmann, R.
A1  - Mikucki, J.
A1  - Tulaczyk, S.
A1  - Funke, O.
A1  - Blandfort, D.
A1  - Espe, Clemens
A1  - Feldmann, Marco
A1  - Francke, Gero
A1  - Hiecker, S.
A1  - Plescher, Engelbert
A1  - Schöngarth, Sarah
A1  - Dachwald, Bernd
A1  - Digel, Ilya
A1  - Artmann, Gerhard
A1  - Eliseev, D.
A1  - Heinen, D.
A1  - Scholz, F.
A1  - Wiebusch, C.
A1  - Macht, S.
A1  - Bestmann, U.
A1  - Reineking, T.
A1  - Zetzsche, C.
A1  - Schill, K.
A1  - Förstner, R.
A1  - Niedermeier, H.
A1  - Szumski, A.
A1  - Eissfeller, B.
A1  - Naumann, U.
A1  - Helbing, K.
T1  - Navigation technology for exploration of glacier ice with maneuverable melting probes
JF  - Cold Regions Science and Technology
N2  - The Saturnian moon Enceladus with its extensive water bodies underneath a thick ice sheet cover is a potential candidate for extraterrestrial life. Direct exploration of such extraterrestrial aquatic ecosystems requires advanced access and sampling technologies with a high level of autonomy. A new technological approach has been developed as part of the collaborative research project Enceladus Explorer (EnEx). The concept is based upon a minimally invasive melting probe called the IceMole. The force-regulated, heater-controlled IceMole is able to travel along a curved trajectory as well as upwards. Hence, it allows maneuvers which may be necessary for obstacle avoidance or target selection. Maneuverability, however, necessitates a sophisticated on-board navigation system capable of autonomous operations. The development of such a navigational system has been the focal part of the EnEx project. The original IceMole has been further developed to include relative positioning based on in-ice attitude determination, acoustic positioning, ultrasonic obstacle and target detection integrated through a high-level sensor fusion. This paper describes the EnEx technology and discusses implications for an actual extraterrestrial mission concept.
Y1  - 2016
U6  - http://dx.doi.org/10.1016/j.coldregions.2015.11.006
SN  - 0165-232X
IS  - 123
SP  - 53
EP  - 70
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Grundmann, Jan Thimo
A1  - Dachwald, Bernd
A1  - Grimm, Christian D.
A1  - Kahle, Ralph
A1  - Koch, Aaron Dexter
A1  - Krause, Christian
A1  - Lange, Caroline
A1  - Quantius, Dominik
A1  - Ulamec, Stephan
T1  - Spacecraft for Hypervelocity Impact Research – An Overview of Capabilities, Constraints and the Challenges of Getting There
JF  - Procedia Engineering
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.proeng.2015.04.021
SN  - 1877-7058
N1  - Proceedings of the 2015 Hypervelocity Impact Symposium (HVIS 2015)
VL  - Vol. 103
SP  - 151
EP  - 158
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Bauer, Waldemar
A1  - Biele, Jens
A1  - Cordero, Frederico
A1  - Dachwald, Bernd
A1  - Koncz, Alexander
A1  - Krause, Christian
A1  - Mikschl, Tobias
A1  - Montenegro, Sergio
A1  - Quantius, Dominik
A1  - Ruffer, Michael
A1  - Sasaki, Kaname
A1  - Schmitz, Nicole
A1  - Seefeldt, Patric
A1  - Tóth, Norbert
A1  - Wejmo, Elisabet
T1  - From Sail to Soil – Getting Sailcraft Out of the Harbour on a Visit to One of Earth’s Nearest Neighbours
T2  - 4th IAA Planetary Denfense Conference - PDC 2015,  13-17 April 2015, Frascati, Roma, Italy
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Pirovano, Laura
A1  - Seefeldt, Patric
A1  - Dachwald, Bernd
A1  - Noomen, Ron
T1  - Attitude and Orbital Dynamics Modeling for an Uncontrolled Solar-Sail Experiment in Low-Earth Orbit
T2  - 25th International Symposium on Spaceflight Dynamics, 2015, Munich, Germany
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Sadykov, R.
A1  - Temiz Artmann, Aysegül
A1  - Artmann, Gerhard
T1  - Changes in intestinal microflora in rats induced by oral exposure to low lead (II) concentrations
T2  - Lead Exposure and Poisoning: Clinical Symptoms, Medical Management and Preventive Strategies
Y1  - 2015
SN  - 9781634826990
SP  - 75
EP  - 99
PB  - Nova Science Publ.
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Kazari, Masahide
A1  - Okada, Kunio
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, Karsten
A1  - Haji Ayed, Anis
T1  - Developments of Hydrogen Dry Low Emission Combustion Technology
T2  - Annual Congress of Gas Turbine Society Japan, 2015
Y1  - 2015
N1  - Abstract in engl.; Text in japanisch
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Okada, Kunio
A1  - Kazari, Masahide
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, Karsten
A1  - Haj Ayed, Anis
T1  - Application of Low NOx Micro-Mix Hydrogen Combustion to Industrial Gas Turbine Combustor and Conceptual Design
T2  - Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan
Y1  - 2015
SN  - 978-4-89111-008-6
N1  - IGTC15-0238
SP  - 141
EP  - 146
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Haj Ayed, A.
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Development and Testing of a Low NOx Micromix Combustion Chamber for an Industrial Gas Turbine
T2  - Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan
Y1  - 2015
SN  - 978-4-89111-008-6
N1  - IGTC15-0092
SP  - 131
EP  - 140
ER  - 
TY  - CHAP
A1  - Roosen, Petra
A1  - Feyerl, Günter
T1  - Gender-specific perception and utilization of personal use vehicles
T2  - FISITA World Automotive Congress 2014 : Maastricht, The Netherlands, 2 - 6 June / [organised by the International Federation of Automotive Engineering Societies (FISITA) ...]. Bd. 1
Y1  - 2015
SN  - 978-1-5108-0209-4
SP  - 418
EP  - 425
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Peloni, A.
A1  - Ceriotti, M.
A1  - Dachwald, Bernd
T1  - Preliminary trajectory design of a multiple NEO rendezvous mission through solar sailing
T2  - Proceedings of the International Astronautical Congress, IAC, Vol. 8, 2014
Y1  - 2015
SN  - 978-1-63439-986-9
SP  - 5352
EP  - 5366
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - JOUR
A1  - Neu, Eugen
A1  - Janser, Frank
A1  - Khatibi, Akbar A.
A1  - Braun, Carsten
A1  - Orifici, Adrian C.
T1  - Operational Modal Analysis of a wing excited by transonic flow
JF  - Aerospace Science and Technology
N2  - Operational Modal Analysis (OMA) is a promising candidate for flutter testing and Structural Health Monitoring (SHM) of aircraft wings that are passively excited by wind loads. However, no studies have been published where OMA is tested in transonic flows, which is the dominant condition for large civil aircraft and is characterized by complex and unique aerodynamic phenomena. We use data from the HIRENASD large-scale wind tunnel experiment to automatically extract modal parameters from an ambiently excited wing operated in the transonic regime using two OMA methods: Stochastic Subspace Identification (SSI) and Frequency Domain Decomposition (FDD). The system response is evaluated based on accelerometer measurements. The excitation is investigated from surface pressure measurements. The forcing function is shown to be non-white, non-stationary and contaminated by narrow-banded transonic disturbances. All these properties violate fundamental OMA assumptions about the forcing function. Despite this, all physical modes in the investigated frequency range were successfully identified, and in addition transonic pressure waves were identified as physical modes as well. The SSI method showed superior identification capabilities for the investigated case. The investigation shows that complex transonic flows can interfere with OMA. This can make existing approaches for modal tracking unsuitable for their application to aircraft wings operated in the transonic flight regime. Approaches to separate the true physical modes from the transonic disturbances are discussed.
Y1  - 2016
U6  - http://dx.doi.org/10.1016/j.ast.2015.11.032
SN  - 1270-9638
VL  - 49
SP  - 73
EP  - 79
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Börner, S.
A1  - Hendrick, P.
A1  - Elsing, R.
T1  - Testing and analysis of the impact on engine cycle parameters and control system modifications using hydrogen or methane as fuel in an industrial gas turbine
T2  - Progress in propulsion physics ; Volume 8
Y1  - 2016
SN  - 978-5-94588-191-4
U6  - http://dx.doi.org/10.1051/eucass/201608409
SP  - 409
EP  - 426
PB  - EDP Sciences
CY  - o.O.
ER  - 
TY  - JOUR
A1  - Neu, Eugen
A1  - Janser, Frank
A1  - Khatibi, Akbar A.
A1  - Orifici, Adrian C.
T1  - Fully Automated Operational Modal Analysis using multi-stage clustering
JF  - Mechanical Systems and Signal Processing
Y1  - 2017
U6  - http://dx.doi.org/10.1016/j.ymssp.2016.07.031
SN  - 0888-3270
VL  - Vol. 84, Part A
SP  - 308
EP  - 323
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Konstantinidis, K.
A1  - Kowalski, Julia
A1  - Martinez, C. F.
A1  - Dachwald, Bernd
A1  - Ewerhart, D.
A1  - Förstner, R.
T1  - Some necessary technologies for in-situ astrobiology on enceladus
T2  - Proceedings of the International Astronautical Congress
Y1  - 2015
SN  - 978-151081893-4
N1  - 6th International Astronautical Congress 2015: Space - The Gateway for Mankind's Future, IAC 2015; Jerusalem; Israel; 12 October 2015 through 16 October 2015
SP  - 1354
EP  - 1372
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, Karsten
A1  - Ayed, Anis Haj
A1  - Kazari, Masahide
A1  - Kitajima, Junichi
A1  - Horikawa, Atsushi
A1  - Okada, Kunio
T1  - Experimental and Numerical Study on Optimizing the Dry Low NOₓ Micromix Hydrogen Combustion Principle for Industrial Gas Turbine Applications
JF  - Journal of Thermal Science and Engineering Applications
N2  - Combined with the use of renewable energy sources for its production, hydrogen represents a possible alternative gas turbine fuel for future low-emission power generation. Due to the difference in the physical properties of hydrogen compared to other fuels such as natural gas, well-established gas turbine combustion systems cannot be directly applied to dry low NOₓ (DLN) hydrogen combustion. The DLN micromix combustion of hydrogen has been under development for many years, since it has the promise to significantly reduce NOₓ emissions. This combustion principle for air-breathing engines is based on crossflow mixing of air and gaseous hydrogen. Air and hydrogen react in multiple miniaturized diffusion-type flames with an inherent safety against flashback and with low NOₓ emissions due to a very short residence time of the reactants in the flame region. The paper presents an advanced DLN micromix hydrogen application. The experimental and numerical study shows a combustor configuration with a significantly reduced number of enlarged fuel injectors with high-thermal power output at constant energy density. Larger fuel injectors reduce manufacturing costs, are more robust and less sensitive to fuel contamination and blockage in industrial environments. The experimental and numerical results confirm the successful application of high-energy injectors, while the DLN micromix characteristics of the design point, under part-load conditions, and under off-design operation are maintained. Atmospheric test rig data on NOₓ emissions, optical flame-structure, and combustor material temperatures are compared to numerical simulations and show good agreement. The impact of the applied scaling and design laws on the miniaturized micromix flamelets is particularly investigated numerically for the resulting flow field, the flame-structure, and NOₓ formation.
Y1  - 2016
U6  - http://dx.doi.org/10.1115/1.4034849
SN  - 1948-5093
N1  - TSEA-15-1227
VL  - 9
IS  - 2
SP  - 021001
EP  - 021001-10
PB  - ASME
CY  - New York, NY
ER  - 
TY  - JOUR
A1  - Ayed, Anis Haj
A1  - Kusterer, Karsten
A1  - Funke, Harald
A1  - Keinz, Jan
T1  - CFD Based Improvement of the DLN Hydrogen Micromix Combustion Technology at Increased Energy Densities
JF  - American Scientific Research Journal for Engineering, Technology, and Sciences (ASRJETS)
N2  - Combined with the use of renewable energy sources for its production, Hydrogen represents a possible alternative gas turbine fuel within future low emission power generation. Due to the large difference in the physical properties of Hydrogen compared to other fuels such as natural gas, well established gas turbine combustion systems cannot be directly applied for Dry Low NOx (DLN) Hydrogen combustion. Thus, the development of DLN combustion technologies is an essential and challenging task for the future of Hydrogen fuelled gas turbines. The DLN Micromix combustion principle for hydrogen fuel has been developed to significantly reduce NOx-emissions. This combustion principle is based on cross-flow mixing of air and gaseous hydrogen which reacts in multiple miniaturized diffusion-type flames. The major advantages of this combustion principle are the inherent safety against flash-back and the low NOx-emissions due to a very short residence time of reactants in the flame region of the micro-flames. The Micromix Combustion technology has been already proven experimentally and numerically for pure Hydrogen fuel operation at different energy density levels. The aim of the present study is to analyze the influence of different geometry parameter variations on the flame structure and the NOx emission and to identify the most relevant design parameters, aiming to provide a physical understanding of the Micromix flame sensitivity to the burner design and identify further optimization potential of this innovative combustion technology while increasing its energy density and making it mature enough for real gas turbine application. The study reveals great optimization potential of the Micromix Combustion technology with respect to the DLN characteristics and gives insight into the impact of geometry modifications on flame structure and NOx emission. This allows to further increase the energy density of the Micromix burners and to integrate this technology in industrial gas turbines.
Y1  - 2016
SN  - 2313-4402
VL  - 26
IS  - 3
SP  - 290
EP  - 303
PB  - GSSRR
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Keinz, Jan
A1  - Abanteriba, Sylvester
T1  - Comparison of Numerical Combustion Models for Hydrogen and Hydrogen-Rich Syngas Applied for Dry-Low-NOx-Micromix-Combustion
JF  - ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition Volume 4A: Combustion, Fuels and Emissions Seoul, South Korea, June 13–17, 2016
N2  - The Dry-Low-NOₓ (DLN) Micromix combustion technology has been developed as low emission combustion principle for industrial gas turbines fueled with hydrogen or syngas. The combustion process is based on the phenomenon of jet-in-crossflow-mixing. Fuel is injected perpendicular into the air-cross-flow and burned in a multitude of miniaturized, diffusion-like flames. The miniaturization of the flames leads to a significant reduction of NOₓ emissions due to the very short residence time of reactants in the flame.

In the Micromix research approach, CFD analyses are validated towards experimental results. The combination of numerical and experimental methods allows an efficient design and optimization of DLN Micromix combustors concerning combustion stability and low NOₓ emissions.

The paper presents a comparison of several numerical combustion models for hydrogen and hydrogen-rich syngas. They differ in the complexity of the underlying reaction mechanism and the associated computational effort.

For pure hydrogen combustion a one-step global reaction is applied using a hybrid Eddy-Break-up model that incorporates finite rate kinetics. The model is evaluated and compared to a detailed hydrogen combustion mechanism derived by Li et al. including 9 species and 19 reversible elementary reactions. Based on this mechanism, reduction of the computational effort is achieved by applying the Flamelet Generated Manifolds (FGM) method while the accuracy of the detailed reaction scheme is maintained.

For hydrogen-rich syngas combustion (H₂-CO) numerical analyses based on a skeletal H₂/CO reaction mechanism derived by Hawkes et al. and a detailed reaction mechanism provided by Ranzi et al. are performed.

The comparison between combustion models and the validation of numerical results is based on exhaust gas compositions available from experimental investigation on DLN Micromix combustors.

The conducted evaluation confirms that the applied detailed combustion mechanisms are able to predict the general physics of the DLN-Micromix combustion process accurately. The Flamelet Generated Manifolds method proved to be generally suitable to reduce the computational effort while maintaining the accuracy of detailed chemistry.

Especially for reaction mechanisms with a high number of species accuracy and computational effort can be balanced using the FGM model.
Y1  - 2016
SN  - 978-0-7918-4975-0
U6  - http://dx.doi.org/10.1115/GT2016-56430
PB  - ASME
CY  - New York, NY
ER  - 
TY  - JOUR
A1  - Neu, Eugen
A1  - Janser, Frank
A1  - Khatibi, Akbar A.
A1  - Orifici, Adrian C.
T1  - Automated modal parameter-based anomaly detection under varying wind excitation
JF  - Structural Health Monitoring
N2  - Wind-induced operational variability is one of the major challenges for structural health monitoring of slender engineering structures like aircraft wings or wind turbine blades. Damage sensitive features often show an even bigger sensitivity to operational variability. In this study a composite cantilever was subjected to multiple mass configurations, velocities and angles of attack in a controlled wind tunnel environment. A small-scale impact damage was introduced to the specimen and the structural response measurements were repeated. The proposed damage detection methodology is based on automated operational modal analysis. A novel baseline preparation procedure is described that reduces the amount of user interaction to the provision of a single consistency threshold. The procedure starts with an indeterminate number of operational modal analysis identifications from a large number of datasets and returns a complete baseline matrix of natural frequencies and damping ratios that is suitable for subsequent anomaly detection. Mahalanobis distance-based anomaly detection is then applied to successfully detect the damage under varying severities of operational variability and with various degrees of knowledge about the present operational conditions. The damage detection capabilities of the proposed methodology were found to be excellent under varying velocities and angles of attack. Damage detection was less successful under joint mass and wind variability but could be significantly improved through the provision of the currently encountered operational conditions.
Y1  - 2016
U6  - http://dx.doi.org/10.1177/1475921716665803
SN  - 1475-9217
VL  - 15
IS  - 6
SP  - 1
EP  - 20
PB  - Sage
CY  - London
ER  - 
TY  - CHAP
A1  - Wu, Ziyi
A1  - Kemper, Hans
T1  - The optimal 48 V – battery pack for a specific load profile of a heavy duty vehicle
T2  - 8. Internationale Fachtagung Kraftwerk Batterie : 26. – 27. April 2016, Münster, Deutschland
Y1  - 2016
ER  - 
TY  - CHAP
A1  - Schirra, Julian
A1  - Bauschat, J.-Michael
A1  - Watmuff, J.H.
T1  - Accurate induced drag prediction for highly non-planar lifting systems
T2  - 19th Australasian Fluid Mechanics Conference : 8.-11. Dezember 2014, Melbourne, Australia
N2  - The impact of wake model effects is investigated for two highly
non-planar lifting systems. Dependent on the geometrical
arrangement of the configuration, the wake model shape is found
to considerably affect the estimation. Particularly at higher angles
of attack, an accurate estimation based on the common linear wake
model approaches is involved.
Y1  - 2014
ER  - 
TY  - CHAP
A1  - Neu, Eugen
A1  - Janser, Frank
A1  - Khatibi, Akbar A.
A1  - Orifici, Adrian C.
T1  - In-flight vibration-based structural health monitoring of aircraft wings
T2  - 30th Congress of the internatonal council of the aeronautical sciences : 25.-30. September 2016, Daejeon, Korea
N2  - This work presents a methodology for automated
damage-sensitive feature extraction and anomaly
detection under multivariate operational variability
for in-flight assessment of wings. The
method uses a passive excitation approach, i. e.
without the need for artificial actuation. The
modal system properties (natural frequencies and
damping ratios) are used as damage-sensitive
features. Special emphasis is placed on the use
of Fiber Bragg Grating (FBG) sensing technology
and the consideration of Operational and
Environmental Variability (OEV). Measurements
from a wind tunnel investigation with a composite
cantilever equipped with FBG and piezoelectric
sensors are used to successfully detect an impact
damage. In addition, the feasibility of damage
localisation and severity estimation is evaluated
based on the coupling found between damageand
OEV-induced feature changes.
Y1  - 2016
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Keinz, Jan
A1  - Abanteriba, Sylvester
T1  - Numerical and Experimental Evaluation of a Dual-Fuel Dry-Low-NOx Micromix Combustor for Industrial Gas Turbine Applications
T2  - Proceedings of the ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. Volume 4B: Combustion, Fuels and Emissions. Charlotte, North Carolina, USA. June 26–30, 2017
N2  - The Dry-Low-NOx (DLN) Micromix combustion technology has been developed originally as a low emission alternative for industrial gas turbine combustors fueled with hydrogen. Currently the ongoing research process targets flexible fuel operation with hydrogen and syngas fuel.

The non-premixed combustion process features jet-in-crossflow-mixing of fuel and oxidizer and combustion through multiple miniaturized flames. The miniaturization of the flames leads to a significant reduction of NOx emissions due to the very short residence time of reactants in the flame.

The paper presents the results of a numerical and experimental combustor test campaign. It is conducted as part of an integration study for a dual-fuel (H2 and H2/CO 90/10 Vol.%) Micromix combustion chamber prototype for application under full scale, pressurized gas turbine conditions in the auxiliary power unit Honeywell Garrett GTCP 36-300.

In the presented experimental studies, the integration-optimized dual-fuel Micromix combustor geometry is tested at atmospheric pressure over a range of gas turbine operating conditions with hydrogen and syngas fuel. The experimental investigations are supported by numerical combustion and flow simulations. For validation, the results of experimental exhaust gas analyses are applied.

Despite the significantly differing fuel characteristics between pure hydrogen and hydrogen-rich syngas the evaluated dual-fuel Micromix prototype shows a significant low NOx performance and high combustion efficiency. The combustor features an increased energy density that benefits manufacturing complexity and costs.
Y1  - 2017
SN  - 978-0-7918-5085-5
U6  - http://dx.doi.org/10.1115/GT2017-64795
N1  - Paper No. GT2017-64795, V04BT04A045
PB  - ASME
CY  - New York
ER  - 
TY  - CHAP
A1  - Striegan, C.
A1  - Haj Ayed, A.
A1  - Funke, Harald
A1  - Loechle, S.
A1  - Kazari, M.
A1  - Horikawa, A.
A1  - Okada, K.
A1  - Koga, K.
T1  - Numerical combustion and heat transfer simulations and validation for a hydrogen fueled "micromix" test combustor in industrial gas turbine applications
T2  - Proceedings of the ASME Turbo Expo
Y1  - 2017
SN  - 978-079185085-5
U6  - http://dx.doi.org/10.1115/GT2017-64719
N1  - ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, GT 2017; Charlotte; United States; 26 June 2017 through 30 June 2017
IS  - Volume Part F130041-4B, 2017
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Meß, Jan-Gerd
A1  - Biele, Jens
A1  - Seefeldt, Patric
A1  - Dachwald, Bernd
A1  - Spietz, Peter
A1  - Grimm, Christian D.
A1  - Spröwitz, Tom
A1  - Lange, Caroline
A1  - Ulamec, Stephan
T1  - Small spacecraft in small solar system body applications
T2  - IEEE Aerospace Conference 2017, Big Sky, Montana, USA
Y1  - 2017
SN  - 978-1-5090-1613-6
U6  - http://dx.doi.org/10.1109/AERO.2017.7943626
SP  - 1
EP  - 20
ER  - 
TY  - JOUR
A1  - Peloni, Alessandro
A1  - Dachwald, Bernd
A1  - Ceriotti, Matteo
T1  - Multiple near-earth asteroid rendezvous mission: Solar-sailing options
JF  - Advances in Space Research
Y1  - 2017
U6  - http://dx.doi.org/10.1016/j.asr.2017.10.017
SN  - 0273-1177
IS  - In Press, Corrected Proof
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Barnat, Miriam
A1  - Bosse, Elke
T1  - The challenge of creating meta-inferences: Combining data representing institutional and individual perspectives on first-year support in higher education
T2  - 9th Conference on Social Science Methodology of the International Sociological Association, Leicester, UK
Y1  - 2016
N1  - RC33 Conference 2016
SP  - 1
EP  - 20
ER  - 
TY  - CHAP
A1  - Kleine, Harald
A1  - Kallweit, Stephan
A1  - Michaux, Frank
A1  - Havermann, Marc
A1  - Olivier, Herbert
T1  - PIV Measurement of Shock Wave Diffraction
T2  - 18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2016, Lissabon
Y1  - 2016
SP  - 1
EP  - 14
ER  - 
TY  - CHAP
A1  - Schleupen, Josef
A1  - Engemann, Heiko
A1  - Bagheri, Mohsen
A1  - Kallweit, Stephan
T1  - The potential of SMART climbing robot combined with a weatherproof cabin for rotor blade maintenance
T2  - 17th European Conference on Composite Materials – ECCM, Munich, Germany
Y1  - 2016
N1  - ECCM 17
SP  - 1
EP  - 8
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Keinz, Jan
A1  - Abanteriba, Sylvester
T1  - Comparison of Numerical Combustion Models for Hydrogen and Hydrogen-Rich Syngas Applied for Dry-Low-Nox-Micromix-Combustion
JF  - Journal of Engineering for Gas Turbines and Power
N2  - The Dry-Low-NOx (DLN) Micromix combustion technology has been developed as low emission combustion principle for industrial gas turbines fueled with hydrogen or syngas. The combustion process is based on the phenomenon of jet-in-crossflow-mixing (JICF). Fuel is injected perpendicular into the air-cross-flow and burned in a multitude of miniaturized, diffusion-like flames. The miniaturization of the flames leads to a significant reduction of NOx emissions due to the very short residence time of reactants in the flame. In the Micromix research approach, computational fluid dynamics (CFD) analyses are validated toward experimental results. The combination of numerical and experimental methods allows an efficient design and optimization of DLN Micromix combustors concerning combustion stability and low NOx emissions. The paper presents a comparison of several numerical combustion models for hydrogen and hydrogen-rich syngas. They differ in the complexity of the underlying reaction mechanism and the associated computational effort. The performance of a hybrid eddy-break-up (EBU) model with a one-step global reaction is compared to a complex chemistry model and a flamelet generated manifolds (FGM) model, both using detailed reaction schemes for hydrogen or syngas combustion. Validation of numerical results is based on exhaust gas compositions available from experimental investigation on DLN Micromix combustors. The conducted evaluation confirms that the applied detailed combustion mechanisms are able to predict the general physics of the DLN-Micromix combustion process accurately. The FGM method proved to be generally suitable to reduce the computational effort while maintaining the accuracy of detailed chemistry.
Y1  - 2018
U6  - http://dx.doi.org/10.1115/1.4038882
SN  - 0742-4795
N1  - Article number 081504;
Paper No: GTP-17-1567
VL  - 140
IS  - 8
PB  - ASME
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Schildt, P.
A1  - Braun, Carsten
A1  - Marcocca, P.
T1  - Flight testing the extra 330LE flying testbed
T2  - 48th Annual International Symposium of the Society of Flight Test Engineers 2017
Y1  - 2017
SN  - 978-151085387-4
N1  - 48th Annual International Symposium of the Society of Flight Test Engineers 2017, SFTE 2017; Destin; United States; 30 October 2017 through 2 November 2017
SP  - 349
EP  - 362
ER  - 
TY  - CHAP
A1  - Schulze, Sven
A1  - Mühleisen, M.
A1  - Feyerl, Günter
T1  - Adaptive energy management strategy for a heavy-duty truck with a P2-hybrid topology
T2  - 18. Internationales Stuttgarter Symposium. Proceedings
Y1  - 2018
U6  - http://dx.doi.org/10.1007/978-3-658-21194-3
SP  - 75
EP  - 89
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Schirra, Julian
A1  - Bissonnette, William
A1  - Bramesfeld, Götz
T1  - Wake-model effects on induced drag prediction of staggered boxwings
JF  - Aerospace
Y1  - 2018
U6  - http://dx.doi.org/10.3390/aerospace5010014
SN  - 2226-4310
VL  - 5
IS  - 1
ER  - 
TY  - CHAP
A1  - Nowack, N.
A1  - Röth, Thilo
A1  - Bührig-Polaczek, A.
A1  - Klaus, G.
ED  - Hirsch, Jürgen
T1  - Advanced Sheet Metal Components Reinforced by Light Metal Cast Structures
T2  - Aluminium alloys : their physical and mechanical properties ; [proceedings of the 11th International Conference on Aluminium Alloys, 22 - 26 Sept. 2008, Aachen, Germany ; ICAA 11]
Y1  - 2008
SN  - 978-3-527-32367-8
IS  - 2
SP  - 2374
EP  - 2381
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Hendrick, P.
T1  - Experimental Evaluation of the Pollutant and Noise Emissions of the GTCP 36-300 Gas Turbine Operated with Kerosene and a Low NOX Micromix Hydrogen Combustor
T2  - 7th European Conference for Aeronautics and Space Sciences, EUCASS 2017
Y1  - 2017
U6  - http://dx.doi.org/10.13009/EUCASS2017-125
ER  - 
TY  - CHAP
A1  - Ludowicy, Jonas
A1  - Rings, René
A1  - Finger, Felix
A1  - Braun, Carsten
T1  - Sizing Studies of Light Aircraft with Serial Hybrid Propulsion Systems
T2  - Luft- und Raumfahrt - Digitalisierung und Vernetzung : Deutscher Luft- und Raumfahrtkongress 2018. 4. - 6. September 2018 - Friedrichshafen
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Götten, Falk
A1  - Braun, Carsten
T1  - Initial Sizing for a Family of Hybrid-Electric VTOL General Aviation Aircraft
T2  - 67. Deutscher Luft- und Raumfahrtkongress 2018
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Ludowicy, Jonas
A1  - Rings, René
A1  - Finger, Felix
A1  - Braun, Carsten
T1  - Sizing Studies of Light Aircraft with Parallel Hybrid Propulsion Systems
T2  - Deutscher Luft- und Raumfahrtkongress 2018
Y1  - 2018
U6  - http://dx.doi.org/10.25967/480227
ER  - 
TY  - JOUR
A1  - Götten, Falk
A1  - Finger, Felix
A1  - Havermann, Marc
A1  - Braun, Carsten
A1  - Gomez, Francisco
A1  - Bill, C.
T1  - On the flight performance impact of landing gear drag reduction methods for unmanned air vehicles
JF  - Deutscher Luft- und Raumfahrtkongress 2018
N2  - The flight performance impact of three different landing gear configurations on a small, fixed-wing UAV is analyzed with a combination of RANS CFD calculations and an incremental flight performance algorithm. A standard fixed landing gear configuration is taken as a baseline, while the influence of retracting the landing gear or applying streamlined fairings is investigated. A retraction leads to a significant parasite drag reduction, while also fairings promise large savings. The increase in lift-to-drag ratio is reduced at high lift coefficients due to the influence of induced drag. All configurations are tested on three different design missions with an incremental flight performance algorithm. A trade-off study is performed using the retracted or faired landing gear's weight increase as a variable. The analysis reveals only small mission performance gains as the aerodynamic improvements are negated by weight penalties. A new workflow for decision-making is presented that allows to estimate if a change in landing gear configuration is beneficial for a small UAV.
Y1  - 2018
U6  - http://dx.doi.org/10.25967/480058
PB  - DGLR
CY  - Bonn
ER  - 
TY  - THES
A1  - Keinz, Jan
T1  - Optimization of a Dry Low NOx Micromix Combustor for an Industrial Gas Turbine Using Hydrogen-Rich Syngas Fuel
Y1  - 2018
N1  - Dissertation submitted for the degree of Doctor of Engineering Sciences and Technology ;
in Cooperation with Aachen university of Applied Sciences, Department Aerospace Technology;
Thesis director: Prof. P. Hendrick;
Thesis co-director: Prof. H. Funke
PB  - Université Libre de Bruxelles - Brussels School of Engineering Aero-Thermo-Mechanics
CY  - Brüssel
ER  - 
TY  - JOUR
A1  - Tekin, Nurettin
A1  - Ashikaga, Mitsugu
A1  - Horikawa, Atsushi
A1  - Funke, Harald
T1  - Enhancement of fuel flexibility of industrial gas turbines by development of innovative hydrogen combustion systems
JF  - Gas for energy
N2  - For fuel flexibility enhancement hydrogen represents a possible alternative gas turbine fuel within future low emission power generation, in case of hydrogen production by the use of renewable energy sources such as wind energy or biomass. Kawasaki Heavy Industries, Ltd. (KHI) has research and development projects for future hydrogen society; production of hydrogen gas, refinement and liquefaction for transportation and storage, and utilization with gas turbine / gas engine for the generation of electricity. In the development of hydrogen gas turbines, a key technology is the stable and low NOx hydrogen combustion, especially Dry Low Emission (DLE) or Dry Low NOx (DLN) hydrogen combustion. Due to the large difference in the physical properties of hydrogen compared to other fuels such as natural gas, well established gas turbine combustion systems cannot be directly applied for DLE hydrogen combustion. Thus, the development of DLE hydrogen combustion technologies is an essential and challenging task for the future of hydrogen fueled gas turbines. The DLE Micro-Mix combustion principle for hydrogen fuel has been in development for many years to significantly reduce NOx emissions. This combustion principle is based on cross-flow mixing of air and gaseous hydrogen which reacts in multiple miniaturized “diffusion-type” flames. The major advantages of this combustion principle are the inherent safety against flashback and the low NOx-emissions due to a very short residence time of the reactants in the flame region of the micro-flames.
Y1  - 2018
IS  - 2
PB  - Vulkan-Verlag
CY  - Essen
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Case studies in initial sizing for hybrid-electric general aviation aircraft
T2  - 2018 AIAA/IEEE Electric Aircraft Technologies Symposium, Cincinnati, Ohio
Y1  - 2018
U6  - http://dx.doi.org/10.2514/6.2018-5005
ER  - 
TY  - JOUR
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Impact of electric propulsion technology and mission requirements on the performance of VTOL UAVs
JF  - CEAS Aeronautical Journal
N2  - One of the engineering challenges in aviation is the design of transitioning vertical take-off and landing (VTOL) aircraft. Thrust-borne flight implies a higher mass fraction of the propulsion system, as well as much increased energy consumption in the take-off and landing phases. This mass increase is typically higher for aircraft with a separate lift propulsion system than for aircraft that use the cruise propulsion system to support a dedicated lift system. However, for a cost–benefit trade study, it is necessary to quantify the impact the VTOL requirement and propulsion configuration has on aircraft mass and size. For this reason, sizing studies are conducted. This paper explores the impact of considering a supplemental electric propulsion system for achieving hovering flight. Key variables in this study, apart from the lift system configuration, are the rotor disk loading and hover flight time, as well as the electrical systems technology level for both batteries and motors. Payload and endurance are typically used as the measures of merit for unmanned aircraft that carry electro-optical sensors, and therefore the analysis focuses on these particular parameters.
Y1  - 2018
U6  - http://dx.doi.org/10.1007/s13272-018-0352-x
SN  - 1869-5582 print
SN  - 1869-5590 online
VL  - 10
IS  - 3
SP  - 843
PB  - Springer
ER  - 
TY  - CHAP
A1  - Finger, Felix
T1  - Comparative Performance and Benefit Assessment of VTOL and CTOL UAVs
T2  - Deutscher Luft- und Raumfahrtkongress (DLRK) 2016, 13.-15.9.2016
Y1  - 2016
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - The Impact of Electric Propulsion on the Performance of VTOL UAVs
T2  - Deutscher Luft- und Raumfahrtkongress 2017, DLRK , München
Y1  - 2017
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - A Review of Configuration Design for Distributed Propulsion Transitioning VTOL Aircraft
T2  - Asia-Pacific International Symposium on Aerospace Technology 2017, APISAT 2017, Seoul, Korea
Y1  - 2017
ER  - 
TY  - CHAP
A1  - Gierse, Andreas
A1  - Krämer, Stefan
A1  - Daab, Dominique J.
A1  - Hessel, Joana
A1  - Baader, Fabian
A1  - Müller, Brigitte S.
A1  - Wagner, Tobias
A1  - Gdalewitsch, Georg
A1  - Plescher, Engelbert
A1  - Pfützenreuter, Lysan
T1  - Experimental in-flight modal-analysis of a sounding rocket structure
T2  - 21st ESA Symposium on Rocket and Ballon related Research
Y1  - 2013
SN  - 9789290922858
SP  - 341
EP  - 346
ER  - 
TY  - CHAP
A1  - Baader, Fabian
A1  - Reiswich, M.
A1  - Bartsch, M.
A1  - Keller, D.
A1  - Tiede, E.
A1  - Keck, G.
A1  - Demircian, A.
A1  - Friedrich, M.
A1  - Dachwald, Bernd
A1  - Schüller, K.
A1  - Lehmann, R.
A1  - Chojetzki, R.
A1  - Durand, C.
A1  - Rapp, L.
A1  - Kowalski, Julia
A1  - Förstner, R.
T1  - VIPER - Student research on extraterrestrical ice penetration technology
T2  - Proceedings of the 2nd Symposium on Space Educational Activities
N2  - Recent analysis of scientific data from Cassini and earth-based observations gave evidence for a global ocean under a surrounding solid ice shell on Saturn's moon Enceladus. Images of Enceladus' South Pole showed several fissures in the ice shell with plumes constantly exhausting frozen water particles, building up the E-Ring, one of the outer rings of Saturn. In this southern region of Enceladus, the ice shell is considered to be as thin as 2 km, about an order of magnitude thinner than on the rest of the moon. Under the ice shell, there is a global ocean consisting of liquid water. Scientists are discussing different approaches the possibilities of taking samples of water, i.e. by melting through the ice using a melting probe. FH Aachen UAS developed a prototype of maneuverable melting probe which can navigate through the ice that has already been tested successfully in a terrestrial environment. This means no atmosphere and or ambient pressure, low ice temperatures of around 100 to 150K (near the South Pole) and a very low gravity of 0,114 m/s^2 or 1100 μg. Two of these influencing measures are about to be investigated at FH Aachen UAS in 2017, low ice temperature and low ambient pressure below the triple point of water. Low gravity cannot be easily simulated inside a large experiment chamber, though. Numerical simulations of the melting process at RWTH Aachen however are showing a gravity dependence of melting behavior. Considering this aspect, VIPER provides a link between large-scale experimental simulations at FH Aachen UAS and numerical simulations at RWTH Aachen. To analyze the melting process, about 90 seconds of experiment time in reduced gravity and low ambient pressure is provided by the REXUS rocket. In this time frame, the melting speed and contact force between ice and probes are measured, as well as heating power and a two-dimensional array of ice temperatures. Additionally, visual and infrared cameras are used to observe the melting process.
Y1  - 2018
SP  - 1
EP  - 6
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Keinz, Jan
A1  - Abanteriba, Sylvester
T1  - Numerical and Experimental Evaluation of a Dual-Fuel Dry-Low-NOx Micromix Combustor for Industrial Gas Turbine Applications
JF  - Journal of Thermal Science and Engineering Applications
Y1  - 2019
U6  - http://dx.doi.org/10.1115/1.4041495
SN  - 19485085
N1  - Paper No: GT2017-64795
VL  - 11
IS  - 1
SP  - 011015
PB  - ASME
CY  - New York
ER  - 
TY  - CHAP
A1  - Schildt, Philipp
A1  - Marzocca, Pier
A1  - Braun, Carsten
A1  - Dahmann, Peter
A1  - Keimer, Jona
T1  - Effects of atmospheric excitation on vibration based condition monitoring methods for hybrid-electric aircraft propulsion systems
T2  - AIAC 2018: 18th Australian International Aerospace Congress: HUMS - 11th Defence Science and Technology (DST) International Conference on Health and Usage Monitoring (HUMS 2019): ISSFD - 27th International Symposium on Space Flight Dynamics (ISSFD)
Y1  - 2019
SN  - 9781925627213
SP  - 923
EP  - 928
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Ohndorf, Andreas
T1  - Global optimization of continuous-thrust trajectories using evolutionary neurocontrol
T2  - Modeling and Optimization in Space Engineering
N2  - Searching optimal continuous-thrust trajectories is usually a difficult and time-consuming task. The solution quality of traditional optimal-control methods depends strongly on an adequate initial guess because the solution is typically close to the initial guess, which may be far from the (unknown) global optimum. Evolutionary neurocontrol attacks continuous-thrust optimization problems from the perspective of artificial intelligence and machine learning, combining artificial neural networks and evolutionary algorithms. This chapter describes the method and shows some example results for single- and multi-phase continuous-thrust trajectory optimization problems to assess its performance. Evolutionary neurocontrol can explore the trajectory search space more exhaustively than a human expert can do with traditional optimal-control methods. Especially for difficult problems, it usually finds solutions that are closer to the global optimum. Another fundamental advantage is that continuous-thrust trajectories can be optimized without an initial guess and without expert supervision.
Y1  - 2019
SN  - 978-3-030-10501-3
SN  - 978-3-030-10500-6
U6  - http://dx.doi.org/10.1007/978-3-030-10501-3_2
N1  - Springer Optimization and Its Applications, vol 144
gedruckt unter der Signatur 21 ZSS 46 in der Bereichsbibliothek Eupener Str. vorhanden
SP  - 33
EP  - 57
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Lyons, W. Berry
A1  - Mikucki, Jill A.
A1  - German, Laura A.
A1  - Welch, Kathleen A.
A1  - Welch, Susan A.
A1  - Gardener, Christopher B.
A1  - Tulaczyk, Slawek M.
A1  - Pettit, Erin C.
A1  - Kowalski, Julia
A1  - Dachwald, Bernd
T1  - The Geochemistry of Englacial Brine from Taylor Glacier, Antarctica
JF  - Journal of Geophysical Research: Biogeosciences
Y1  - 2019
U6  - http://dx.doi.org/10.1029/2018JG004411
SN  - 2169-8961
PB  - Wiley
CY  - Hoboken
ER  - 
TY  - JOUR
A1  - Campen, R.
A1  - Kowalski, Julia
A1  - Lyons, W.B.
A1  - Tulaczyk, S.
A1  - Dachwald, Bernd
A1  - Pettit, E.
A1  - Welch, K. A.
A1  - Mikucki, J.A.
T1  - Microbial diversity of an Antarctic subglacial community and high‐resolution replicate sampling inform hydrological connectivity in a polar desert
JF  - Environmental Microbiology
Y1  - 2019
U6  - http://dx.doi.org/10.1111/1462-2920.14607
SN  - 1462-2920
IS  - accepted article
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - PAT
A1  - Artmann, Gerhard
A1  - Linder, Peter
A1  - Bayer, Robin
A1  - Gossmann, Matthias
T1  - Celldrum electrode arrangement for measuring mechanical stress [Patent of invention]
N2  - The invention pertains to a CellDrum electrode arrangement for measuring mechanical stress, comprising a mechanical holder (1 ) and a non-conductive membrane (4), whereby the membrane (4) is at least partially fixed at its circumference to the mechanical holder (1), keeping it in place when the membrane (4) may bend due to forces acting on the membrane (4), the mechanical holder (1) and the membrane (4) forming a container, whereby the membrane (1) within the container comprises an cell- membrane compound layer or biological material (3) adhered to the deformable membrane 4 which in response to stimulation by an agent may exert mechanical stress to the membrane (4) such that the membrane bending stage changes whereby the container may be filled with an electrolyte, whereby an electric contact (2) is arranged allowing to contact said electrolyte when filled into to the container, whereby within a predefined geometry to the fixing of the membrane (4) an electrode (7) is arranged, whereby the electrode (7) is electrically insulated with respect to the electric contact (2) as well as said electrolyte, whereby mechanical stress due to an agent may be measured as a change in capacitance.
Y1  - 2017
N1  - Patent auch unter EP3403090, CN109477828, US2019033245 und LU92948 veröffentlicht.
PB  - WIPO
CY  - Geneva
ER  - 
TY  - CHAP
A1  - Götten, Falk
A1  - Havermann, Marc
A1  - Braun, Carsten
A1  - Gomez, Francisco
A1  - Bil, Cees
T1  - On the Applicability of Empirical Drag Estimation Methods for Unmanned Air Vehicle Design   Read More: https://arc.aiaa.org/doi/10.2514/6.2018-3192
T2  - 2018 Aviation Technology, Integration, and Operations Conference, AIAA AVIATION Forum
Y1  - 2018
U6  - http://dx.doi.org/10.2514/6.2018-3192
SN  - 1533-385X
N1  - AIAA 2018-3192
SP  - Article 3192
ER  - 
TY  - JOUR
A1  - Jan Thimo, Grundmann
A1  - Bauer, Waldemar
A1  - Biele, Jens
A1  - Boden, Ralf
A1  - Ceriotti, Matteo
A1  - Cordero, Federico
A1  - Dachwald, Bernd
A1  - Dumont, Etienne
A1  - Grimm, Christian D.
A1  - Hercik, David
T1  - Capabilities of Gossamer-1 derived small spacecraft solar sails carrying Mascot-derived nanolanders for in-situ surveying of NEAs
JF  - Acta Astronautica
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.actaastro.2018.03.019
SN  - 0094-5765
VL  - 156
IS  - 3
SP  - 330
EP  - 362
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Bauer, Waldemar
A1  - Borchers, Kai
A1  - Dumont, Etienne
A1  - Grimm, Christian D.
A1  - Ho, Tra-Mi
A1  - Jahnke, Rico
A1  - Lange, Caroline
A1  - Maiwald, Volker
A1  - Mikulz, Eugen
A1  - Quantius, Dominik
A1  - Reershemius, Siebo
A1  - Renger, Thomas
A1  - Riemann, Johannes
A1  - Sasaki, Kaname
A1  - Seefeldt, Patric
A1  - Spietz, Peter
A1  - Spröwitz, Tom
A1  - Toth, Norbert
A1  - Wejmo, Elisabet
A1  - Biele, Jens
A1  - Krause, Christian
A1  - Cerotti, Matteo
A1  - Peloni, Alessandro
A1  - Dachwald, Bernd
T1  - Small Spacecraft Solar Sailing for Small Solar System Body Multiple Rendezvous and Landing
T2  - 2018 IEEE Aerospace Conference : 3-10 March 2018
Y1  - 2018
SN  - 978-1-5386-2014-4
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Abanteriba, Sylvester
T1  - An overview on dry low NOx micromix combustor development for hydrogen-rich gas turbine applications
JF  - International Journal of Hydrogen Energy
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.ijhydene.2019.01.161
SN  - 0360-3199
VL  - 44
IS  - 13
SP  - 6978
EP  - 6990
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Thoma, Andreas
A1  - Ravi, Sridhar
T1  - Significance of parallel computing on the performance of Digital Image Correlation algorithms in MATLAB
N2  - Digital Image Correlation (DIC) is a powerful tool used to evaluate displacements and deformations in a non-intrusive manner. By comparing two images, one of the undeformed reference state of a specimen and another of the deformed target state, the relative displacement between those two states is determined. DIC is well known and often used for post-processing analysis of in-plane displacements and deformation of specimen. Increasing the analysis speed to enable real-time DIC analysis will be beneficial and extend the field of use of this technique.
Here we tested several combinations of the most common DIC methods in combination with different parallelization approaches in MATLAB and evaluated their performance to determine whether real-time analysis is possible with these methods. To reflect improvements in computing technology different hardware settings were also analysed. We found that implementation problems can reduce the efficiency of a theoretically superior algorithm such that it becomes practically slower than a suboptimal algorithm. The Newton-Raphson algorithm in combination with a modified Particle Swarm algorithm in parallel image computation was found to be most effective. This is contrary to theory, suggesting that the inverse-compositional Gauss-Newton algorithm is superior. As expected, the Brute Force Search algorithm is the least effective method. We also found that the correct choice of parallelization tasks is crucial to achieve improvements in computing speed. A poorly chosen parallelisation approach with high parallel overhead leads to inferior performance. Finally, irrespective of the computing mode the correct choice of combinations of integerpixel and sub-pixel search algorithms is decisive for an efficient analysis. Using currently available hardware realtime analysis at high framerates remains an aspiration.
Y1  - 2019
SP  - 1
EP  - 17
ER  - 
TY  - CHAP
A1  - Waldmann, Christoph
A1  - Vera, Jean-Pierre de
A1  - Dachwald, Bernd
A1  - Strasdeit, Henry
A1  - Sohl, Frank
A1  - Hanff, Hendrik
A1  - Kowalski, Julia
A1  - Heinen, Dirk
A1  - Macht, Sabine
A1  - Bestmann, Ulf
A1  - Meckel, Sebastian
A1  - Hildebrandt, Marc
A1  - Funke, Oliver
A1  - Gehrt, Jan-Jöran
T1  - Search for life in ice-covered oceans and lakes beyond Earth
T2  - 2018 IEEE/OES Autonomous Underwater Vehicle Workshop, Proceedings November 2018, Article number 8729761
N2  - The quest for life on other planets is closely connected with the search for water in liquid state. Recent discoveries of deep oceans on icy moons like Europa and Enceladus have spurred an intensive discussion about how these waters can be accessed. The challenge of this endeavor lies in the unforeseeable requirements on instrumental characteristics both with respect to the scientific and technical methods. The TRIPLE/nanoAUV initiative is aiming at developing a mission concept for exploring exo-oceans and demonstrating the achievements in an earth-analogue context, exploring the ocean under the ice shield of Antarctica and lakes like Dome-C on the Antarctic continent.
KW  - Planetary exploration
KW  - Jupiter
KW  - ice moons
KW  - underwater vehicle
KW  - Antarctica
Y1  - 2018
U6  - http://dx.doi.org/10.1109/AUV.2018.8729761
ER  - 
TY  - JOUR
A1  - Schildt, Ph.
A1  - Braun, Carsten
A1  - Marzocca, P.
T1  - Metric evaluating potentials of condition-monitoring approaches for hybrid electric aircraft propulsion systems
JF  - CEAS Aeronautical Journal
Y1  - 2019
U6  - http://dx.doi.org/10.1007/s13272-019-00411-3
SN  - 1869-5590
SP  - 1
EP  - 14
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Schael, S.
A1  - Atanasyan, A.
A1  - Berdugo, J.
A1  - Bretz, T.
A1  - Czupalla, Markus
A1  - Dachwald, Bernd
A1  - Doetinchem, P. von
A1  - Duranti, M.
A1  - Gast, H.
A1  - Karpinski, W.
A1  - Kirn, T.
A1  - Lübelsmeyer, K.
A1  - Maña, C.
A1  - Marrocchesi, P.S.
A1  - Mertsch, P.
A1  - Moskalenko, I.V.
A1  - Schervan, T.
A1  - Schluse, M.
A1  - Schröder, K.-U.
A1  - Schultz von Dratzig, A.
A1  - Senatore, C.
A1  - Spies, L.
A1  - Wakely, S.P.
A1  - Wlochal, M.
A1  - Uglietti, D.
A1  - Zimmermann, J.
T1  - AMS-100: The next generation magnetic spectrometer in space – An international science platform for physics and astrophysics at Lagrange point 2
JF  - Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.nima.2019.162561
SN  - 0168-9002
VL  - 944
IS  - 162561
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Finger, Felix
A1  - Bil, Cees
A1  - Braun, Carsten
T1  - Initial Sizing Methodology for Hybrid-Electric General Aviation Aircraft
JF  - Journal of Aircraft
Y1  - 2019
U6  - http://dx.doi.org/10.2514/1.C035428
SN  - 1533-3868
VL  - 57
IS  - 2
SP  - 245
EP  - 255
ER  - 
TY  - CHAP
A1  - Baader, Fabian
A1  - Keller, Denis
A1  - Lehmann, Raphael
A1  - Gerber, Lukas
A1  - Reiswich, Martin
A1  - Dachwald, Bernd
A1  - Förstner, Roger
T1  - Operating melting probes for ice penetration under sublimation  conditions and in reduced gravity on a sounding rocket
T2  - Proceedings of the 24th ESA Symposium on European Rocket and Balloon Programmes and related Research
Y1  - 2019
SN  - 0379-6566
N1  - 24th PAC Symposium 2019
ER  -