TY  - JOUR
A1  - Enning, Manfred
A1  - Zambou, N.
A1  - Abel, D.
T1  - Longitudinal Control of Following Vehicles within Platoon : A Model-Based Predictive Approach / Zambou, N. ; Enning, M. ; Abel, D.
JF  - Advances in automotive control 2004 : a proceedings volume from the IFAC symposium, Salerno, Italy, 19 - 23 April 2004 / ed. C. Pianese
Y1  - 2005
SN  - 0080442501
N1  - International Federation of Automatic Control ; Symposium on Advances in Automotive Control ; (4, 2004, Salerno)
SP  - 733
EP  - 738
PB  - Elsevier
CY  - Oxford
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Zambou, Nathan
A1  - Abel, Dirk
T1  - Nonlinear spacing control of following vehicles within platoon a controlled lagrangian approach / Zambou, Nathan ; Enning, Manfred ; Abel, Dirk
JF  - NOLCOS, IFAC Symposium on Nonlinear Control Systems
Y1  - 2004
N1  - NOLCOS, 2004, IFAC Symposium on Nonlinear Control Systems, 6th, Stuttgart, DE, 2004-09-01 - 2004-09-03
SP  - 1211
EP  - 1216
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Dues, M. W.
A1  - Siekmann, H. E.
T1  - Spectral Analysis of Pressure Fluctuations and Velocity Fields as Investigated on Propeller Pumps / Dues, M. W. ; Kallweit, S. D. ; Siekmann, H. E.
JF  - Preprints : Fifth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-5) : May 8 - 11, 1994, Maui Marriott Hotel, Kaanapali, Maui, Hawaii, U.S.A / sponsored by Pacific Center of Thermal-Fluids Engineering. [W.-J. Yang, chairman] / Vol. B.
Y1  - 1994
N1  - International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 5, 1994, Kaanapali, Hawaii
SP  - 98
EP  - 112
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Kaminsky, Radoslav
A1  - Rossi, Massimiliano
A1  - Morbiducci, Umberto
T1  - PIV Measurements of Flows in Artificial Heart Valves / Kaminsky, Radoslav ; Kallweit, Stephan ; Rossi, Massimiliano ; Morbiducci, Umberto ; Scalise, Lorenzo
JF  - Particle Image Velocimetry - New Developments and Recent Applications
Y1  - 2008
SN  - 978-3-540-73528-1
N1  - Topics in Applied Physics
SP  - 55
EP  - 72
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Helbing, M.
A1  - Orglmeister, R.
A1  - Siekmann, H. E.
T1  - Image Processing Techniques with Neural Networks for Flow Visualization in Rotating Machinery / Helbing, M. ; Orgimeiste, R. [Orglmeister, R.] ; Kallweit, S. ; Siekmann, H. E. ; Dues, M. ; Cronemeyer, J.
JF  - FLUCOME '94 : the 4th Triennial International Symposium on Fluid Control, Measurement and Visualization; August 29 - September 1, 1994, Toulouse, France, International Congress Centre, DIGORA-Labège / CERT/ONERA. General chairman Patrick Hebrard
Y1  - 1994
SP  - 87
EP  - 94
CY  - Toulouse
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Uchiyama, R.
A1  - Siekmann, H.
T1  - Fault Diagnostic Method for Pump Running Conditions Based on Process Modeling and Neural Network / Uchiyama, R. ; Kallweit, S. ; Siekmann, H.
JF  - International Journal of Rotating Machinery. 4 (1998), H. 1
Y1  - 1998
SN  - 1542-3034
SP  - 49
EP  - 59
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Schimpf, Axel
T1  - Photogrammetric Particle Image Velocimetry / Schimpf, Axel ; Kallweit, Stephan
JF  - Particle image velocimetry : recent improvements; proceedings of the Europiv 2 Workshop held in Zaragoza, Spain, March 31 - April 1, 2003 / edited by M. Stanislas ...
Y1  - 2003
SN  - 3-540-21423-2
SP  - 295
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Willert, Chris
A1  - Dues, Michael
A1  - Müller, Ulrich
T1  - PIV for Volume Flow Metering / Kallweit, Stephan ; Willert, Chris ; Dues, Michael ; Müller, Ulrich ; Lederer, Thomas
Y1  - 2008
N1  - 14th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2008-07-07 - 2008-07-10, Lisbon (Portugal)
SP  - 6 S.
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Kaminsky, R.
A1  - Rossi, M.
A1  - Morbiducci, U.
T1  - Time resolved PIV technique for high temporal resolution measurements of prosthetic heart valves fluid dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Catellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.
JF  - The International Journal of Artificial Organs. 28 (2005), H. 9
Y1  - 2005
SN  - 1724-6040
N1  - Abstracts: XXXII Annual ESAO Congress, 5-8 October 2005, Bologna - Italy
SP  - 946
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Kaminsky, R.
A1  - Rossi, M.
A1  - Morbiducci, U.
T1  - 2D PIV Study of the flow downstream : Two prototypes of a ney monoleaflet artificial aortic heart valve prosthesis / Kaminsky, R. ; Kramm, K. ; Weber, H. J. ; Simons, A. P. ; Kallweit, S. ; Verdonck, P. R.
JF  - The International Journal of Artificial Organs. 28 (2005), H. 9
Y1  - 2005
SN  - 1724-6040
N1  - Abstracts: XXXII Annual ESAO Congress, 5-8 October 2005, Bologna - Italy
SP  - 921
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Kaminsky, R.
A1  - Rossi, M.
A1  - Morbiducci, U.
T1  - 3D PIV measurements of prosthetic heart valve dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Castellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.
JF  - The International Journal of Artificial Organs. 28 (2005), H. 9
Y1  - 2005
SN  - 1724-6040
N1  - Abstracts: XXXII Annual ESAO Congress, 5-8 October 2005, Bologna - Italy
SP  - 868
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Vanlanduit, S.
A1  - Vanherzeele, J.
A1  - Brouns, M.
T1  - Time resolved PIV reconstruction of periodic flows / Vanlanduit, S. ; Vanherzeele, J. ; Kallweit, S. ; Brouns, M. ; Guillaume, P.
JF  - PIV'07, 7th International Symposium on Particle Image Velocimetry, Roma, IT, Sep 11-14, 2007
Y1  - 2007
N1  - PIV, Internional Symposium on Particle Image Velocimetry, 7 ; Datei: Vanlanduit.pdf
SP  - 1
EP  - 14
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Dues, M.
A1  - Siekmann, H.
T1  - Particle-Image-Velocimetry (PIV) in rotierenden Maschinen / Dues, M. ; Kallweit, S. ; Siekmann, H.
JF  - Lasermethoden in der Strömungsmesstechnik, 3. Fachtagung der Deutschen Gesellschaft für Laser-Anemometrie (GALA), Bremen, DE, 5.-7. Sep, 1994
Y1  - 1994
SN  - 3-8265-0162-4
N1  - Lasermethoden in der Strömungsmesstechnik, Fachtagung, 3
SP  - 19.1
EP  - 19-5
PB  - Shaker
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Kaminsky, R.
A1  - Rossi, M.
A1  - Scalise, L.
T1  - PIV Measurements with high temporal Resolution behind Artificial  Heart Valves  / Kaminsky, R. ; Rossi, M. ; Scalise, L. ; Kallweit, S. ; Verdonck, P.
JF  - Proceedings of the 6th International Symposium on Particle Image Velocimetry
Y1  - 2005
N1  - link zum abstract
PB  - Caltech
CY  - Pasadena, CA
ER  - 
TY  - JOUR
A1  - Dues, M.
A1  - Gebhardt, Andreas
A1  - Kallweit, Stephan
A1  - Scheffler, T.
A1  - Siekmann, H.
A1  - Uchiyama, T.
T1  - Flow Visualization in a Cavitating Flow
JF  - Proceedings of the German-Japanese Symposium on Multi-Phase Flow : Karlsruhe, Germany, August 23 - 25, 1994 / comp. by U. Müller ...
Y1  - 1994
N1  - German Japanese Symposium on Multi-Phase Flow <1994, Karlsruhe> ; Kernforschungszentrum Karlsruhe ; 5389
SP  - 391
EP  - 402
PB  - Kernforschungszentrum Karlsruhe
CY  - Karlsruhe
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
A1  - Schmidt, Frank-Michael
A1  - Hötter, Jan-Steffen
A1  - Sokalla, Wolfgang
A1  - Sokalla, Patrick
T1  - Additive Manufacturing by selective laser melting the realizer desktop machine and its application for the dental industry
JF  - Physics Procedia
Y1  - 2010
SN  - 1875-3892
N1  - Laser Assisted Net Shape Engineering 6, Proceedings of the LANE 2010, Part 2
VL  - 5
IS  - 2
SP  - 543
EP  - 549
ER  - 
TY  - BOOK
A1  - Gebhardt, Andreas
T1  - Understanding Additive Manufacturing : Rapid Prototyping - Rapid Tooling - Rapid Manufacturing
Y1  - 2011
SN  - 978-3-446-42552-1
PB  - Hanser
CY  - München
ER  - 
TY  - JOUR
A1  - Fateri, Miranda
A1  - Hötter, Jan-Steffen
A1  - Gebhardt, Andreas
T1  - Experimental and Theoretical Investigation of Buckling Deformation of Fabricated Objects by Selective Laser Melting
JF  - Physics Procedia
N2  - Although Selective Laser Melting (SLM) process is an innovative manufacturing method, there are challenges such as inferior mechanical properties of fabricated objects. Regarding this, buckling deformation which is caused by thermal stress is one of the undesired mechanical properties which must be alleviated. As buckling deformation is more observable in hard to process materials, silver is selected to be studied theoretically and experimentally for this paper. Different scanning strategies are utilized and a Finite Element Method (FEM) is applied to calculate the temperature gradient in order to determine its effect on the buckling deformation of the objects from experiments.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.phpro.2012.10.062
SN  - 1875-3892
N1  - Part of special issue "Laser Assisted Net shape Engineering 7 (LANE 2012)"
VL  - 39
SP  - 464
EP  - 470
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
A1  - Fateri, Miranda
T1  - 3D printing and its applications
JF  - RTejournal - Forum für Rapid Technologie
N2  - Eine zunehmende Anzahl von Artikeln in Publikumszeitschriften und Journalen rückt die direkte Herstellung von Bauteilen und Figuren immer mehr in das Bewusstsein einer breiten Öffentlichkeit. Leider ergibt sich nur selten ein einigermaßen vollständiges Bild davon, wie und in welchen Lebensbereichen diese Techniken unseren Alltag verändern werden. Das liegt auch daran, dass die meisten Artikel sehr technisch geprägt sind und sich nur punktuell auf Beispiele stützen. Dieser Beitrag geht von den Bedürfnissen der Menschen aus, wie sie z.B. in der Maslow’schen Bedürfnispyramide strukturiert dargestellt sind und unterstreicht dadurch, dass 3D Printing (oder Additive Manufacturing resp. Rapid Prototyping) bereits alle Lebensbereiche erfasst hat und im Begriff ist, viele davon zu revolutionieren.
N2  - An increasing amount of popular articles focus on making models and sculptures by 3D Printing thus making more and more even private users aware of this technology. Unfortunately they mostly draw an incomplete picture of how our daily life will be influenced by this new technology. Often this is caused by a very technical point of view based on not very representative examples. This article focuses on the peoples needs as they have been structured by the so-called Maslow pyramid. Doing so, it underlines that 3D Printing (called Additive Manufacturing or Rapid Prototyping as well) already touches all aspects of life and is about to revolutionize most of them.
Y1  - 2013
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0009-2-35626
SN  - 1614-0923
VL  - 10
IS  - 1
PB  - Fachhochschule Aachen
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Peeken, Heinz
A1  - Troeder, Christoph
A1  - Benner, Joachim
A1  - Platt, Werner
T1  - A new approach to describe the mechanical performance of flexible couplings in drive systems
T2  - Proceedings of the International Conference on Rotordynamics : September 14 - 17, 1986, Tokyo
Y1  - 1986
N1  - International Conference on Rotordynamics <1986, Tōkyō>
SP  - 159
EP  - 163
PB  - IFToMM
CY  - Tokyo
ER  - 
TY  - JOUR
A1  - Abdel-Latif, Lotfie Ahmed
A1  - Peeken, Heinz
A1  - Benner, Joachim
T1  - Thermohydrodynamic analysis of thrust-bearing with circular pads running on bubbly oil (BTHD-theory)
JF  - Journal of tribology
Y1  - 1985
SN  - 0742-4787
SN  - 1528-8897
VL  - 107
IS  - 4
SP  - 527
EP  - 537
ER  - 
TY  - CHAP
A1  - Beer, Stefan
A1  - Haidn, O.J.
A1  - Willms, Herbert
ED  - Carvalho, Maria da Graça
T1  - Control of stoichiometric propellant supply in an H2/O2-spinning reserve system
T2  - Combustion technologies for a clean environment : selected papers from the proceedings of the first international conference, Vilamoura, Portugal, September 3 - 6, 1991. - (Energy, combustion and the environment ;1)
Y1  - 1995
SN  - 2-88124-619-2
SP  - 825
EP  - 838
PB  - Gordon and Breach
CY  - Basel [u.a.]
ER  - 
TY  - CHAP
A1  - Adomeit, G.
A1  - Willms, Herbert
ED  - Skupinski, Edwin
T1  - Experimental investigation of the acceleration of deflagration in wake flow
T2  - Safety of thermal water reactors : proceedings of a Seminar on the Results of the European Communities’ Indirect Action Research Programme on Safety of Thermal Water Reactors, held in Brussels, 1–3 October 1984 / Commission of the European Communities
Y1  - 1984
SN  - 0-86010-678-0
SN  - 978-94-009-4972-0 (Online-Nachdr. vom Springer-Verl.)
N1  - Forschungsvorhaben Nr. 024 SRD
SP  - 294
EP  - 304
PB  - Graham & Trotman [u.a.]
CY  - London Gaithersburg, Md.
ER  - 
TY  - RPRT
A1  - Adomeit, G.
A1  - Willms, Herbert
T1  - Experimental investigation of the acceleration of deflagration in wake flow : final report. - (Euratom-publications-EUR ; 9593 : Nuclear science and technology)
Y1  - 1984
SN  - 92-825-4699-3
PB  - Commission of the European Communities
CY  - Luxembourg
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Kallweit, Stephan
A1  - Lautermann, Mark
T1  - Towards an autonomous pilot system for a tunnel boring machine
T2  - 5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa
Y1  - 2012
SN  - 978-1-4673-5183-6
N1  - Robotics and Mechatronics Conference of South Africa <5, 2012, Johannesburg> ; ROBOMECH <5, 2012, Johannesburg>
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - The calculation of component activities of binary metallic melts from their gas solubilities
JF  - Zeitschrift für Metallkunde
Y1  - 1985
SN  - 0044-3093
VL  - 76
IS  - 2
SP  - 135
EP  - 137
ER  - 
TY  - CHAP
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
ED  - Brodowsky, Horst
T1  - Thermodynamic behaviour of oxygen in molten metallic alloys
T2  - Thermochemistry of alloys : recent developments of experimental methods ; [proceedings of the NATO Advanced Study Institute on Thermochemistry of Alloys, Recent Developments of Experimental Methods, Kiel, F.R.G., August 17 - 27, 1987]. - (NATO ASI series : Series C ; 286)
Y1  - 1989
SN  - 0-7923-0434-9
SP  - 419
EP  - 428
PB  - Springer
CY  - Dordrecht [u.a.]
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics and solubility of oxygen in liquid copper-lead alloys at 1200°C from E.M.F. measurements
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1984
SN  - 0940-483X
SN  - 0005-9021
VL  - 88
IS  - 8
SP  - 707
EP  - 710
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
A1  - Kapoor, Madan Lal
T1  - Experiments and theoretical considerations on the solution of oxygen in binary metal alloys
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1983
SN  - 0005-9021
SN  - 0940-483X
VL  - 87
IS  - 12
SP  - 1201
EP  - 1204
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - Thermodynamic relations between component activities and gas solubilities in binary metallic systems
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1985
SN  - 0940-483X
SN  - 0005-9021
VL  - 89
IS  - 2
SP  - 130
EP  - 134
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics and solubility of oxygen in liquid bismuth-lead and bismuth-antimony alloys
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1987
SN  - 0940-483X
SN  - 0005-9021
VL  - 91
IS  - 7
SP  - 790
EP  - 794
ER  - 
TY  - JOUR
A1  - Wang, Mao
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Experiments on the electrochemical determination of the sulphur activities in the system copper-silver at 1200°C
JF  - Zeitschrift für Metallkunde
Y1  - 1988
SN  - 0044-3093
VL  - 79
IS  - 5
SP  - 336
EP  - 339
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Investigations of the thermodynamics of oxygen and the determination of the miscibility gap in the system copper-oxygen-lead at 12000C
JF  - Zeitschrift für Metallkunde
Y1  - 1984
SN  - 0044-3093
VL  - 75
IS  - 8
SP  - 586
EP  - 589
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - The application of a quadi-chemical lattice model to binary metallic solvents containing oxygen in higher concentrations
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 10
SP  - 665
EP  - 666
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Investigation of the thermodynamics of oxygen and the determination of phase boundaries in the system copper-oxygen-bismuth at 12000C
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 8
SP  - 530
EP  - 534
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Kapoor, Madan Lal
A1  - Frohberg, Martin G.
T1  - Thermodynamic behaviour of oxygen in molten substitutional alloy solvents
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 1
SP  - 53
EP  - 58
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
A1  - Kapoor, Madan Lal
T1  - Prediction of thermodynamic properties of oxygen in binary metallic solvents
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 6
SP  - 372
EP  - 375
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics of oxygen in the copper-antimony system at 1473K
JF  - Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik
Y1  - 1988
SN  - 0044-2658
VL  - 41
IS  - 10
SP  - 498
EP  - 501
ER  - 
TY  - JOUR
A1  - Wang, Mao
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics of oxygen in the lead-antimony system at 1173 K
JF  - Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik
Y1  - 1987
SN  - 0044-2658
VL  - 40
IS  - 6
SP  - 316
EP  - 319
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Mund, F.
A1  - Raupach, Michael
A1  - Schleser, Markus
A1  - Walk-Lauffer, Bernd
T1  - Improvement of textile reinforced concrete by polymer additives
T2  - ICPIC '04 : 11th International Congress on Polymers in Concrete : 2nd-4th June, 2004 at BAM, Berlin, Germany : proceedings / ed. by M. Maultzsch
Y1  - 2004
SN  - 3-00-013706-8
SP  - 469
EP  - 476
PB  - BAM
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Dilthey, Ulrich
A1  - Brandenburg, Annette
A1  - Schleser, Markus
T1  - Dispensing and application of unfilled adhesives in the micro range
JF  - Welding and cutting. 3 (2004), H. 4
Y1  - 2004
SN  - 1612-3433
SP  - 250
EP  - 254
ER  - 
TY  - CHAP
A1  - Kolkmann, Annette
A1  - Gries, Thomas
A1  - Schleser, Markus
A1  - Dilthey, Ulrich
T1  - Innovative yarn structures and coatings for textile reinforced concrete
T2  - All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main
Y1  - 2005
CY  - Frankfurt a.M.
ER  - 
TY  - CHAP
A1  - Walk-Lauffer, Bernd
A1  - Raupach, Michael
A1  - Dilger, Klaus
A1  - Böhm, Stefan
A1  - Mundt, F.
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
T1  - The interconnection between inner filaments of textile reinforcement by means of polymer modified concrete
T2  - Proceedings of the First International Conference on Innovative Materials and Technologies for Construction and Restoration : : Lecce, June 6 - 9, 2004 / Università degli Studi di Lecce / ed. Antonio La Tegola. Vol. 1: Key-notes, materials, construction
Y1  - 2004
SP  - 150
EP  - 159
PB  - Liguori
CY  - Napoli
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Schoene, Jens
A1  - Hegger, Josef
A1  - Gallwoszus, Jörg
A1  - Feldmann, Markus
A1  - Kopp, Maik
A1  - Gündel, Max
ED  - Cairns, John W.
T1  - Investigation on bond mechanisms of innovative small-scale shear connectors between steel and concrete
T2  - Bond in concrete 2012. Vol. 2. Bond in new materials and under severe conditions
Y1  - 2012
SN  - 978-88-907078-3-4
SP  - 893
EP  - 898
PB  - Publisher creations
CY  - Manerbio, Brescia
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Statistical modeling of laser welding of DP/TRIP steel sheets
JF  - Optics and laser technology
N2  - In this research work, a statistical analysis of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets was done using response surface methodology. The analysis considered the effect of laser power (2–2.2 kW), welding speed (40–50 mm/s) and focus position (−1 to 0 mm) on the heat input, the weld bead geometry, uniaxial tensile strength, formability limited dome height and welding operation cost. The experimental design was based on Box–Behnken design using linear and quadratic polynomial equations for predicting the mathematical models. The results indicate that the proposed models predict the responses adequately within the limits of welding parameters being used and the welding speed is the most significant parameter during the welding process.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.optlastec.2011.05.025
SN  - 1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)
VL  - 44
IS  - 1
SP  - 92
EP  - 101
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Optimization of laser welding of DP/TRIP steel sheets using statistical approach
JF  - Optics and laser technology
N2  - Generally, the quality of a weld joint is directly influenced by the welding input parameter settings. Selection of proper process parameters is important to obtain the desired weld bead profile and quality. In this research work, numerical and graphical optimization techniques of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets were carried out using response surface methodology (RSM) based on Box–Behnken design. The procedure was established to improve the weld quality, increase the productivity and minimize the total operation cost by considering the welding parameters range of laser power (2–2.2 kW), welding speed (40–50 mm/s) and focus position (−1 to 0 mm). It was found that, RSM can be considered as a powerful tool in experimental welding optimization, even when the experimenter does not have a model for the process. Strong, efficient and low cost weld joints could be achieved using the optimum welding conditions.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.optlastec.2011.06.028
SN  - 1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)
VL  - 44
IS  - 1
SP  - 255
EP  - 262
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Olschok, Simon
A1  - Jakobs, Stefan
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Rossiter, Eduardo
T1  - Laser beam submerged arc hybrid welding
JF  - Physics procedia
N2  - The laser beam-submerged arc hybrid welding method originates from the knowledge that, with increasing penetration depth, the laser beam process has a tendency to pore formation in the lower weld regions. The coupling with the energy-efficient submerged-arc process improves degassing and reduces the tendency to pore formation. The high deposition rate of the SA process in combination with the laser beam process offers, providing the appropriate choice of weld preparation, the possibility of welding plates with a thickness larger than 20° mm in a single pass, and also of welding thicker plates with the double-sided single pass technique.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.phpro.2012.10.016
SN  - 1875-3892
N1  - Part of special issue "Laser assisted net shape engineering 7 (LANE 2012)"
VL  - 39
SP  - 75
EP  - 83
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Gumenyuk, Andrey
T1  - Measuring of plasma properties induced by non-vacuum electron beam welding
JF  - Physics of plasma
N2  - Electron beam plasma measurement was realised by means of DIABEAM system invented by ISF RWTH Aachen. The Langmuir probe method is used for measurement. The relative simplicity of the method and the possibility of dispersion of high power on the probe allow its application for the investigation of high-power electron beams. The key element of the method is a rotating thin tungsten wire, which intersects the beam transversely on its axis and collects part of the current by itself. The signals, which are registered in the DIABEAM as a voltage, were taken in the form of amplitude. The conversion of the probe current into the distribution along the beam radius was realised using the Abel’s method. A voltage-current characteristic was built for the beam current. The local electron density as well as the electron temperature, the floating potential and the plasma potential were measured and calculated by means of this characteristic.
Y1  - 2012
U6  - http://dx.doi.org/10.1063/1.3675874
SN  - 1089-7674 (E-Journal); 1070-664X (Print)
VL  - 19
IS  - 1
SP  - 1
EP  - 7
PB  - AIP Publishing
CY  - Melville, NY
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Jerabek, Jakub
A1  - Keil, Allessandra
ED  - Brameshuber, Wolfgang
T1  - Theoretical and experimental investigations on textile-reinforced concrete spalling behavior
T2  - Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ;  75)
Y1  - 2010
SN  - 978-2-35158-106-3
SP  - 153
EP  - 162
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - JOUR
A1  - Mukherjee, Krishnendu
A1  - Ramazani, Ali
A1  - Yang, Li
A1  - Prahl, Ulrich
A1  - Bleck, Wolfgang
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
T1  - Characterization of gas metal arc welded hot rolled DP600 steel
JF  - Steel research international
Y1  - 2011
SN  - 1869-344X (E-Book); 1611-3683 (Print)
VL  - Vol. 82
IS  - Iss. 12
SP  - 1408
EP  - 1416
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Turichin, Gleb
A1  - Valdaitseva, Elena
A1  - Bach, Friedrich-Wilhelm
A1  - Hassel, Thomas
A1  - Beniyashi, Alexander
T1  - Investigation of factors for defect-free weld formation by non-vacuum electron beam welding
T2  - Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine
Y1  - 2011
SP  - 104
EP  - 109
PB  - Paton Publ. House
CY  - Kiev
ER  - 
TY  - JOUR
A1  - Glowania, Michael
A1  - Gries, Thomas
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Innovative coating technology for textile reinforcements of concrete applications
JF  - 13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)
Y1  - 2011
SN  - 978-3-03785-008-4
SN  - 1013-9826 (E-Journal) ; 0252-1059 (Print)
SP  - 167
EP  - 173
PB  - Trans Tech Publications
CY  - Bäch
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Numerical and experimental investigation of tensile behavior of laser beam welded TRIP700 steel
JF  - ISIJ international
Y1  - 2011
SN  - 1347-5460 (E-Journal); 0915-1559 (Print)
VL  - Vol. 51
IS  - No. 3
SP  - 429
EP  - 434
PB  - ISIJ
CY  - Tōkyō
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Scheik, Sven
A1  - Michaeli, Walter
A1  - Grönlund, Oliver
A1  - Neuß, Andreas
A1  - Wunderle, Johannes
A1  - Poprawe, Reinhart
A1  - Rösner, A.
A1  - Bobzin, Kirsten
A1  - Schläfer, Thomas
A1  - Theiß, Sebastian
A1  - Kutschmann, Pia
A1  - Haberstroh, Edmund
A1  - Flock, Dustin
A1  - Bührig-Polaczek, Andreas
A1  - Jakob, M.
ED  - Thoben, Klaus-Dieter
T1  - Novel process chains for the production of plastics/metal-hybrids
T2  - 17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011
Y1  - 2011
SN  - 978-1-457-70772-8 ; 978-3-943024-05-0
SP  - 596
EP  - 604
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Roesner, Andreas
A1  - Scheik, Sven
A1  - Olowinsky, Alexander
A1  - Gillner, Arnold
A1  - Propawe, Reinhart
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Innovative approach of joining hybrid components
JF  - Journal of laser applications
Y1  - 2011
SN  - 1042-346X
VL  - Vol. 23
IS  - Iss. 3
SP  - 32007
PB  - Laser Institute of America
CY  - Orlando, Fla.
ER  - 
TY  - JOUR
A1  - Roesner, Andreas
A1  - Scheik, Sven
A1  - Olowinsky, Alexander
A1  - Gillner, Arnold
A1  - Reisgen, Uwe
A1  - Schleser, Markus
T1  - Laser assisted joining of plastic metal hybrids
JF  - Lasers in manufacturing 2011 : proceedings of the sixth International WLT Conference on Lasers in Manufacturing, Munich, May 23 - 26 2011. (Physics procedia ; Vol. 12 (2011), Part B)
Y1  - 2011
SN  - 1875-3892 (E-Journal); 1875-3884 (Print)
SP  - 370
EP  - 377
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Zabirov, Alexander
T1  - Virtual welding equipment for simulation of GMAW processes with integration of power source regulation
JF  - Frontiers of materials science
Y1  - 2011
SN  - 2095-0268 (E-Journal); 2095-025X (Print)
VL  - Vol. 5
IS  - Iss. 2
SP  - 79
EP  - 89
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Huber, Frédéric
A1  - Bleck, Wolfgang
A1  - Scheik, Sven
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Investigation of galvanneal coating adherence in adhesive bonded joints using lap shear test
T2  - Galvatech 2011 : 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, June 21 - 24, 2011, Genova (Italy) ; proceedings
Y1  - 2011
SN  - 978-88-85298-82-8
SP  - Paper No. 43
PB  - Associazione Italiana di Metallurgia
CY  - Mailand
ER  - 
TY  - CHAP
A1  - Chudoba, Rostislav
A1  - Konrad, Martin
A1  - Schleser, Markus
A1  - Meskouris, Konstantin
A1  - Reisgen, Uwe
ED  - Curbach, Manfred
T1  - Parametric study of tensile response of TRC specimens reinforced with epoxy-penetrated multi-filament yarns
T2  - Textilbeton - Theorie und Praxis : Tagungsband zum 4. Kolloquium zu textilbewehrten Tragwerken (CTRS4) und zur 1. Anwendertagung, Dresden, 3.6.2009 - 5.6.2009
Y1  - 2009
SN  - 978-3-86780-122-5
SP  - 87
EP  - 98
PB  - Techn. Univ.
CY  - Dresden
ER  - 
TY  - CHAP
A1  - Göttsche, Joachim
A1  - Hinsch, Andreas
A1  - Wittwer, Volker
ED  - Hugo-Le Goff, Anne
T1  - Electrochromic and optical properties of mixed WO3-TiO2 thin films produced by sputtering and the sol-gel technique
T2  - Optical materials technology for energy efficiency and solar energy conversion XI: chromogenics for smart windows : 19 and 21 May 1992, Toulouse-Labège. (SPIE proceedings series. 1728)
Y1  - 1992
SN  - 0-8194-0901-4
SP  - 13
EP  - 25
PB  - SPIE
CY  - Bellingham, Wash.
ER  - 
TY  - CHAP
A1  - Raupach, Michael
A1  - Orlowsky, Jeannette
A1  - Büttner, T.
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
ED  - Hegger, Josef
T1  - Epoxy-impregnated textiles in concrete - load bearing capacity and durability
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 77
EP  - 88
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Pak, Daniel
A1  - Piegeler, D.
A1  - Feldmann, Markus
A1  - Schleser, Markus
A1  - Dilthey, Ulrich
ED  - Hegger, Josef
T1  - Hybrid joints of textile reinforced concrete parts - designed for assembly
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 181
EP  - 190
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
ED  - Barroso de Aguiar, Jose
ED  - Jalali, Said
ED  - Camoes, Aires
ED  - Ferrera, Rui Miguel
T1  - Composite improvement of textile reinforced concrete by polymeric impregnation of the textiles
T2  - International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimarães, Portugal
Y1  - 2006
SN  - 972-99179-1-4
SP  - 185
EP  - 192
PB  - Universidade do Minho, Departamento de Engenharia Civil
CY  - Guimarães
ER  - 
TY  - JOUR
A1  - Schleser, Markus
A1  - Walk-Lauffer, Bernd
A1  - Raupach, Michael
A1  - Dilthey, Ulrich
T1  - Application of polymers for textile-reinforced concrete
JF  - Journal of materials in civil engineering : properties, applications, durability
Y1  - 2006
SN  - 0899-1561
VL  - 18
IS  - 5
SP  - 670
EP  - 676
ER  - 
TY  - JOUR
A1  - Feldmann, Markus
A1  - Pak, Daniel
A1  - Geßler, Achim
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
T1  - Bonded connections for textile reinforced concrete structures
JF  - Cailiao-gongcheng = Journal of materials engineering
Y1  - 2006
SN  - 1001-4381
IS  - Special iss.
SP  - 123
EP  - 127
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Chudoba, Rostislav
A1  - Konrad, Martin
ED  - Triantafillou, T. C.
T1  - Experimental investigation and micro-mechanical simulaltion of concrete reinforced with epoxy impregnated fabrics
T2  - Fibre-reinforced polymer reinforcement for concrete structures : proceedings of the 8th international conference : Patras, Greece, July 16- 18, 2007
Y1  - 2007
SN  - 9608969107
SP  - 456
EP  - 457
PB  - Univ.
CY  - Patras
ER  - 
TY  - CHAP
A1  - Schleser, Markus
A1  - Dilthey, Ulrich
A1  - Mund, F.
A1  - Böhm, Stefan
ED  - Czarnecki, Lech
ED  - Garbacz, Andrzej
T1  - Improvement of textile reinforced concrete by use of polymers
T2  - Adhesion in interfaces of building materials: a multi-scale approach : [Symposium "Adhesion in Building Bonds: Macro-, Micro- and Nano-Scale" at Warsaw University of Technology in the framework of the European Materials Research Society, fall meeting 2005 ; selected papers]. (Advances in materials science and restoration. No. 2)
Y1  - 2007
SN  - 978-3-931681-89-0
SP  - 153
EP  - 162
PB  - Aedificatio Publ.
CY  - Freiburg
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Hegger, Josef
A1  - Voss, Stefan
ED  - Reinhardt, Hans W.
T1  - Load-bearing behaviour of polymer-impregnated textiles in concrete
T2  - Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53)
Y1  - 2007
SN  - 978-2-35158-046-2
SP  - 183
EP  - 192
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - JOUR
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Feldmann, Martin
A1  - Pak, Daniel
A1  - Geßler, Achim
T1  - Investigation of punctiform, plane and hybrid joints of textile-reinforced concrete parts
JF  - Cement and concrete composites
Y1  - 2008
SN  - 0958-9465
VL  - Vol. 30
IS  - iss. 2
SP  - 82
EP  - 87
ER  - 
TY  - CHAP
A1  - Schoene, Jens
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Jerabek, Jakub
A1  - Chudoba, Rostislav
ED  - Fisher, Gregor
T1  - Theoretical and experimental investigations on textile-reinforced concrete spalling behavior
T2  - 8th International PhD Symposium in Civil Engineering : Lyngby, June 20-23, 2010 : proceedings
Y1  - 2010
SN  - 9788778773012
SP  - 383
EP  - 388
PB  - Technical University of Denmark, Dept. of Civil Engineering
CY  - Lyngby
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Möller, M.
A1  - Weichhold, O.
ED  - Hegger, Josef
T1  - Application of polymers in textile reinforced concrete : from the interface to construction elements
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 55
EP  - 64
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Gries, Thomas
A1  - Glowania, Michael
T1  - Impregnated textile reinforcements for concrete applications
T2  - European Coatings Congress : Nürnberg, Germany, 30.3. - 1.4. 2009
Y1  - 2009
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Puterman, Moshe
T1  - Investigation and improvement of concrete reinforced with epoxy impregnated fabrics
T2  - Proceedings / 12th International Congress Polymers in Concrete, ICPIC 07, chuncheon, Korea, Sept. 26. - 28., 2007
Y1  - 2007
SN  - 978-89-9600450-9
SP  - 725
EP  - 733
PB  - Kangwoon National Univ.
CY  - Chancheon
ER  - 
TY  - CHAP
A1  - Hartmann, Axel
A1  - Kallweit, Stephan
A1  - Feldusen, Antje
A1  - Schröder, Wolfgang
T1  - Detection of upstream propagating sound waves at buffet flow using high-speed PIV
BT  - 16th International Symposium on Applications of Laser Techniques to Fluid Mechanics ; 9th to 12th July 2012 Lisbon, Portugal
Y1  - 2012
N1  - Aerodynamisches Institut <Aachen> ; International Symposium on Applications of Laser Techniques to Fluid Mechanics <16, 2012, Lissabon>
ER  - 
TY  - CHAP
A1  - Quadflieg, Till
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Jockenhövel, Stefan
A1  - Reisgen, Uwe
A1  - Gries, Thomas
ED  - Heslehurst, Rikard Benton
T1  - Shear connectors for hybrid joints of metal and FRP
T2  - Diversity in composites : conference proceedings : Composites Australia and CRC-ACS 2012 conference
Y1  - 2012
SN  - 978-0-9873285-0-2
SP  - [152]
EP  - [160]
PB  - Composites Australia
CY  - Hawthorne
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Zabirov, Alexander
A1  - Füssel, Uwe
A1  - Schnick, Michael
A1  - Hertel, Martin
A1  - Jaeckel, Sebastian
T1  - Modelling and visualisation of the GMA process
JF  - Welding and Cutting
Y1  - 2012
SN  - 1612-3433
VL  - 11
IS  - 4
SP  - 242
EP  - 249
PB  - DVS Verlag
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Ramazani, Ali
A1  - Li, Yang
A1  - Mukherjee, Krishnendu
A1  - Prahl, Ulrich
A1  - Bleck, Wolfgang
A1  - Abdurakhmanov, Aydemir
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding
JF  - Computational materials science
Y1  - 2013
SN  - 1879-0801 (E-Book); 0927-0256 (Print)
VL  - Vol. 68
SP  - 107
EP  - 116
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Gumenyuk, Amdrej V.
ED  - Turichin, G.
T1  - Measurement method of electron beam plasma parameters by non-vacuum electron beam welding
T2  - Beam technologies & laser application : proceedings of the VI international conference, Saint Petersburg, Sept. 23-25, 2009
Y1  - 2009
SP  - 259
EP  - 267
PB  - Politechnical Univ.
CY  - Saint Petersburg
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Gumenyuk, Andrej
T1  - Application of electron beam welding to fabrication of steel-aluminium dissimilar joint
T2  - Beam technologies & laser application : proceedings of the VII international conference, Saint Petersburg, Sept. 18-21, 2012
Y1  - 2012
SP  - 265
EP  - 279
PB  - Publ. House
CY  - Saint Petersburg
ER  - 
TY  - CHAP
A1  - Sedlacek, G.
A1  - Geßler, A.
A1  - Schleser, Markus
A1  - Mund, F.
A1  - Völling, B.
T1  - Verbindungen vorgefertigter Textilbetonbauteile
T2  - Textile reinforced structures : proceedings of the 2nd Colloquium on Textile Reinforced Structures (CTRS2), Dresden, Germany, 29.9. - 1.10.2003
Y1  - 2003
SN  - 3-86005-386-8
SP  - 481
EP  - 493
PB  - Techn. Univ.
CY  - Dresden
ER  - 
TY  - JOUR
A1  - Hötter, Jan-Steffen
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Selective laser melting of metals: desktop machines open up new chances even for small companies
JF  - Advanced materials research
N2  - Additive manufacturing (AM) of metal parts by using Selective Laser Melting (SLM) has become a powerful tool mostly in the area of automotive, aerospace engineering and others. Especially in the field of dentistry, jewelry and related branches that require individualized or even one-of-a-kind products, the direct digital manufacturing process opens up new ways of design and manufacturing. In these fields, mostly small and medium sized businesses (SME) are operating which do not have sufficient human and economic resources to invest in this technology. But to stay competitive, the application of AM can be regarded as a necessity. In this situation a new desktop machine (Realizer SLM 50) was introduced that cost about 1/3 of a shop floor SLM machine and promises small quality parts. To find out whether the machine really is an alternative for SMEs the University of Applied Science, Aachen, Germany, designed, build and optimized typical parts from the dentistry and the jewelry branches using CoCr and silver material, the latter being new with this application. The paper describes the SLM procedure and how to find and optimize the most important parameters. The test is accompanied by digital simulation in order to verify the build parameters and to plan future builds. The procedure is shown as well as the resulting parts made from CoCr and silver material.
Y1  - 2012
U6  - http://dx.doi.org/10.4028/www.scientific.net/AMR.622-623.461
SN  - 1662-8985 (E-Journal); 1022-6680 (Print)
VL  - 622-623
SP  - 461
EP  - 465
PB  - Trans Tech Publ.
CY  - Baech
ER  - 
TY  - CHAP
A1  - Starke, Günther
A1  - Kunkel, Thomas
A1  - Hahn, Daniel
T1  - Flexible collaboration and control of heterogeneous mechatronic devices and systems by means of an event-driven, SOA-based automation concept
T2  - 2013 IEEE International Conference on Industrial Technologies (ICIT-13)
Y1  - 2013
SN  - 978-1-4673-4567-5 ; 978-1-4673-4569-9
SP  - 1982
EP  - 1987
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Khosravi, Maziar
T1  - Experimental investigation of selective laser melting of lunar regolith for in-situ applications
T2  - ASME 2013 International Mechanical Engineering Congress and Exposition : San Diego, California, USA, November 15–21, 2013. Vol. 2A: Advanced manufacturing
Y1  - 2013
SN  - 978-0-7918-5618-5
SP  - V02AT02A008
PB  - ASME
ER  - 
TY  - THES
A1  - Pfaff, Raphael
T1  - Evaluation and extension of the potential for application of the behavioural framework to practical engineering problems
Y1  - 2013
N1  - Coventry, Univ., Diss., 2013
ER  - 
TY  - THES
A1  - Pfaff, Raphael
T1  - Automated processing of the ISL Doppler images
Y1  - 2007
N1  - Hagen, Fernuniv., Bachelorarbeit, 2007
ER  - 
TY  - THES
A1  - Pfaff, Raphael
T1  - Modelling of nonlinear systems using piecewise defined models
Y1  - 2006
N1  - Coventry, Univ., Masterarbeit, 2006
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Vinsonneau, B.
A1  - Burnham, K. J.
T1  - Multiple models for nonlinear systems
T2  - Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]
Y1  - 2006
SN  - 1-84600-013-0
SP  - 347
EP  - 352
ER  - 
TY  - JOUR
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Thümmler, Stefan
A1  - Thurn, Laura
T1  - Experimental investigation on selective laser melting of glass
JF  - Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014
Y1  - 2014
U6  - http://dx.doi.org/10.1016/j.phpro.2014.08.118
SN  - 1875-3892 (E-Journal); 1875-3884 (Print)
VL  - 56 (2014)
SP  - 357
EP  - 364
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Goßmann, Matthias
A1  - Raatschen, Hans-Jürgen
A1  - Temiz Artmann, Aysegül
A1  - Staat, Manfred
T1  - Simulation of cardiac cell-seeded membranes using the edge-based smoothed FEM
T2  - Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)
N2  - We present an electromechanically coupled Finite Element model for cardiac tissue. It bases on the mechanical model for cardiac tissue of Hunter et al. that we couple to the McAllister-Noble-Tsien electrophysiological model of purkinje fibre cells. The corresponding system of ordinary differential equations is implemented on the level of the constitutive equations in a geometrically and physically nonlinear version of the so-called edge-based smoothed FEM for plates. Mechanical material parameters are determined from our own pressure-deflection experimental setup. The main purpose of the model is to further examine the experimental results not only on mechanical but also on electrophysiological level down to ion channel gates. Moreover, we present first drug treatment simulations and validate the model with respect to the experiments.
Y1  - 2015
SN  - 978-3-319-02534-6 ; 978-3-319-02535-3
SP  - 187
EP  - 212
PB  - Springer
CY  - Heidelberg
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Larkowski, Tomasz
A1  - Burnham, Keith J.
T1  - An application of adaptive control in the behavioural framework
T2  - 21st International Conference on Systems Engineering (ICSEng) : 16 - 18 Aug. 2011, Las Vegas, Nevada ; proceedings
Y1  - 2011
SN  - 978-1-4577-1078-0 ; 978-0-7695-4495-3
SP  - 49
EP  - 54
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Larkowski, Tomasz
A1  - Burnham, Keith J.
T1  - An approach to adaptive control in the behavioural framework
T2  - UKACC International Conference on Control 2010 (CONTROL 2010) : Coventry, United Kingdom, 7 - 10 September 2010 ; Vol. 2. (IET seminar digest ; 2010/004)
Y1  - 2010
SN  - 978-1-62748-119-9
SP  - 833
EP  - 838
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Seiler, Friedrich
A1  - Pichler, Alexander
A1  - Pfaff, Raphael
A1  - George, Alfred
A1  - Srulijes, Julio
T1  - Improved Doppler picture velocimetry and new automated processing
T2  - 14th International Symposium on Applications of Laser Techniques to Fluid Mechanics : Lisbon, Portugal, 7 - 10 July 2008
Y1  - 2008
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Pichler, Alexander
A1  - George, Alfred
A1  - Seiler, Friedrich
T1  - Model based image processing for flow visualisation : 16th International Conference on Systems Science, Wroclaw, Poland, September 04 - 06, 2007
T2  - PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620
Y1  - 2007
SP  - 1
EP  - 10
PB  - ISL
CY  - Saint Louis, France
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Burnham, Keith J.
T1  - On abstraction and interpretability: a behavioural perspective
T2  - 19th International Conference on Systems Engineering 2008 : ICSENG '08 : 19 - 21 Aug. 2008, University of Nevada, Las Vegas, Nevada
Y1  - 2008
SN  - 978-0-7695-3331-5 ; 978-0-7695-2719-2
SP  - 89
EP  - 94
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Pfaff, Raphael
A1  - Burnham, Keith J.
T1  - On abstraction and interpretability: a behavioural perspective
JF  - Systems Science
Y1  - 2009
SN  - 0137-1223
VL  - Vol. 35
IS  - Iss. 2
SP  - 19
EP  - 26
ER  - 
TY  - JOUR
A1  - Seiler, Friedrich
A1  - Pichler, Alexander
A1  - Pfaff, Raphael
A1  - Srulijes, Julio
T1  - Novel processing tools for automated doppler picture velocimetry (DPV) evaluation
JF  - Journal of visualization
Y1  - 2009
SN  - 1343-8875
VL  - Vol. 12
IS  - Iss. 4
SP  - 323
EP  - 337
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Jewelry fabrication via selective laser melting of glass
T2  - ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications
N2  - Selective Laser Melting (SLM) is one of the Additive Manufacturing (AM) technologies applicable for producing complex geometries which are typically expensive or difficult to fabricate using conventional methods. This process has been extensively investigated experimentally for various metals and the fabrication process parameters have been established for different applications; however, fabricating 3D glass objects using SLM technology has remained a challenge so far although it could have many applications. This paper presents a summery on various experimental evaluations of a material database incorporating the build parameters of glass powder using the SLM process for jewelry applications.
Y1  - 2014
SN  - 978-0-7918-4583-7
U6  - http://dx.doi.org/10.1115/ESDA2014-20380
SP  - V001T06A005
ER  - 
TY  - JOUR
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Selective Laser Melting of Soda-Lime Glass Powder
JF  - International Journal of Applied Ceramic Technology
Y1  - 2015
U6  - http://dx.doi.org/10.1111/ijac.12338
SN  - 1744-7402
VL  - 12
IS  - 1
SP  - 53
EP  - 61
PB  - Wiley-Blackwell
CY  - Oxford
ER  - 
TY  - JOUR
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Process Parameters Development of Selective Laser Melting of Lunar Regolith for On-Site Manufacturing Applications
JF  - International Journal of Applied Ceramic Technology
Y1  - 2015
SN  - 1744-7402
U6  - http://dx.doi.org/10.1111/ijac.12326
VL  - 12
IS  - 1
SP  - 46
EP  - 52
PB  - Wiley-Blackwell
CY  - Oxford
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Picard, Antoni
A1  - Brill, Manfred
A1  - Cassel, Detlev
A1  - Jentsch, Andreas
A1  - Merten, Sabine
A1  - Rollwa, Markus
T1  - The Virtual Clean Room - a new tool in teaching MST process technologies
N2  - The Virtual Clean Room - a new tool in teaching MST process technologies University education in high-technology fields like MST is not complete without intensive laboratory sessions. Students cannot fully grasp the complexity and the special problems related to the manufacturing of microsystems without a thorough hands-on experience in a MST clean room.
KW  - Virtuelle Maschine
KW  - VM
KW  - Mikrosystemtechnik
KW  - MST
KW  - virtual clean room
Y1  - 2003
ER  -