TY - CHAP A1 - Kreutz, Christian A1 - Lörgen, Jürgen A1 - Graewe, Boris A1 - Bargon, Joachim A1 - Yoshida, Mayumi A1 - Freso, Zachary M. A1 - Frèchet, Jean M. J. T1 - High frequency quartz micro balances: a promising path to enhanced sensitivity of gravimetric sensors N2 - An array of 50 MHz quartz microbalances (QMBs) coated with a dendronized polymer was used to detect small amounts of volatile organic compounds (VOCs) in the gas phase. The results were compared to those obtained with the commonly used 10 MHz QMBs. The 50 MHz QMBs proved to be a powerful tool for the detection of VOCs in the gas phase; therefore, they represent a promising alternative to the much more delicate surface acoustic wave devices (SAWs). KW - Biosensor KW - Quartz micro balances KW - electronic noses dendronized polymers inverted mesa technology Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1445 ER - TY - CHAP A1 - Rabner, Arthur A1 - Shacham, Yosi T1 - A concept for a sensitive micro total analysis system for high throughput fluorescence imaging N2 - This paper discusses possible methods for on-chip fluorescent imaging for integrated bio-sensors. The integration of optical and electro-optical accessories, according to suggested methods, can improve the performance of fluorescence imaging. It can boost the signal to background ratio by a few orders of magnitudes in comparison to conventional discrete setups. The methods that are present in this paper are oriented towards building reproducible arrays for high-throughput micro total analysis systems (µTAS). The first method relates to side illumination of the fluorescent material placed into microcompartments of the lab-on-chip. Its significance is in high utilization of excitation energy for low concentration of fluorescent material. The utilization of a transparent µLED chip, for the second method, allows the placement of the excitation light sources on the same optical axis with emission detector, such that the excitation and emission rays are directed controversly. The third method presents a spatial filtering of the excitation background. KW - Biosensor KW - Fluorescence KW - imaging KW - lab-on-chip KW - fluidic KW - lenslet array KW - LED chip KW - image sensor KW - biosensor Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1456 ER - TY - CHAP A1 - Förster, Arnold A1 - Stock, Jürgen A1 - Montanari, Simone A1 - Lepsa, Mihail Ion A1 - Lüth, Hans T1 - Fabrication and characterisation of GaAs Gunn Diode Chips for applications at 77 GHz in automotive industry N2 - GaAs-based Gunn diodes with graded AlGaAs hot electron injector heterostructures have been developed under the special needs in automotive applications. The fabrication of the Gunn diode chips was based on total substrate removal and processing of integrated Au heat sinks. Especially, the thermal and RF behavior of the diodes have been analyzed by DC, impedance and S-parameter measurements. The electrical investigations have revealed the functionality of the hot electron injector. An optimized layer structure could fulfill the requirements in adaptive cruise control (ACC) systems at 77 GHz with typical output power between 50 and 90 mW. KW - Biosensor KW - Gunn diode KW - microwave generation KW - GaAs hot electron injector Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1462 ER - TY - CHAP A1 - Platen, Johannes A1 - Poghossian, Arshak A1 - Schöning, Michael Josef T1 - Microstructured Nanostructures – nanostructuring by means of conventional photolithography and layer-expansion technique N2 - A new and simple method for nanostructuring using conventional photolithography and layer expansion or pattern-size reduction technique is presented, which can further be applied for the fabrication of different nanostructures and nano-devices. The method is based on the conversion of a photolithographically patterned metal layer to a metal-oxide mask with improved pattern-size resolution using thermal oxidation. With this technique, the pattern size can be scaled down to several nanometer dimensions. The proposed method is experimentally demonstrated by preparing nanostructures with different configurations and layouts, like circles, rectangles, trapezoids, “fluidic-channel”-, “cantilever”- and meander-type structures. KW - Biosensor KW - Nanostructuring KW - layer expansion KW - pattern-size reduction KW - self-aligned patterning Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1477 ER - TY - CHAP A1 - Pijanowska, Dorota G. A1 - Remiszewska, Elzbieta A1 - Pederzolli, Cecilia A1 - Lunelli, Lorenzo A1 - Vendano, Michele A1 - Canteri, Roberto A1 - Dudzinski, Konrad A1 - Kruk, Jerzy A1 - Torbicz, Wladyslaw T1 - Surface modification for microreactor fabrication N2 - In this paper, methods of surface modification of different supports, i.e. glass and polymeric beads for enzyme immobilisation are described. The developed method of enzyme immobilisation is based on Schiff’s base formation between the amino groups on the enzyme surface and the aldehyde groups on the chemically modified surface of the supports. The surface of silicon modified by APTS and GOPS with immobilised enzyme was characterised by atomic force microscopy (AFM), time-of-flight secondary ion mass spectroscopy (ToF-SIMS) and infrared spectroscopy (FTIR). The supports with immobilised enzyme (urease) were also tested in combination with microreactors fabricated in silicon and Perspex, operating in a flow-through system. For microreactors filled with urease immobilised on glass beads (Sigma) and on polymeric beads (PAN), a very high and stable signal (pH change) was obtained. The developed method of urease immobilisation can be stated to be very effective. KW - Biosensor KW - Microreactors KW - surface modification KW - enzyme immobilisation KW - lab-on-a-chip Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1480 ER - TY - CHAP A1 - Bukhari, Syed Faisal Ahmed A1 - Yang, Wuqiang T1 - Multi-interface level sensors and new development in monitoring and control of oil separators N2 - In the oil industry, huge saving may be made if suitable multi-interface level measurement systems are employed for effectively monitoring crude oil separators and efficient control of their operation. A number of techniques, e.g. externally mounted displacers, differential pressure transmitters and capacitance rod devices, have been developed to measure the separation process with gas, oil, water and other components. Because of the unavailability of suitable multi-interface level measurement systems, oil separators are currently operated by the trial-and-error approach. In this paper some conventional techniques, which have been used for level measurement in industry, and new development are discussed. KW - Biosensor KW - Level sensor KW - multi-interface measurement KW - electrical capacitance tomography KW - ECT Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1498 ER - TY - CHAP A1 - Tymecki, Lukasz A1 - Glab, Stanislaw A1 - Koncki, Robert T1 - Miniaturized, planar ion-selective electrodes fabricated by means of thick-film technology N2 - Various planar technologies are employed for developing solid-state sensors having low cost, small size and high reproducibility; thin- and thick-film technologies are most suitable for such productions. Screen-printing is especially suitable due to its simplicity, low-cost, high reproducibility and efficiency in large-scale production. This technology enables the deposition of a thick layer and allows precise pattern control. Moreover, this is a highly economic technology, saving large amounts of the used inks. In the course of repetitions of the film-deposition procedure there is no waste of material due to additivity of this thick-film technology. Finally, the thick films can be easily and quickly deposited on inexpensive substrates. In this contribution, thick-film ion-selective electrodes based on ionophores as well as crystalline ion-selective materials dedicated for potentiometric measurements are demonstrated. Analytical parameters of these sensors are comparable with those reported for conventional potentiometric electrodes. All mentioned thick-film strip electrodes have been totally fabricated in only one, fully automated thickfilm technology, without any additional manual, chemical or electrochemical steps. In all cases simple, inexpensive, commercially available materials, i.e. flexible, plastic substrates and easily cured polymer-based pastes were used. KW - Biosensor KW - Potentiometry KW - thick-film technology KW - screen-printing KW - ion-selective electrodes Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1506 ER - TY - CHAP A1 - Spannhake, Jan A1 - Schulz, Olaf A1 - Helwig, Andreas A1 - Krenkow, Angelika A1 - Müller, Gerhard A1 - Doll, Theodor T1 - High-temperature MEMS heater platforms: long-term performance of metal and semiconductor heater materials N2 - Micromachined thermal heater platforms offer low electrical power consumption and high modulation speed, i.e. properties which are advantageous for realizing nondispersive infrared (NDIR) gas- and liquid monitoring systems. In this paper, we report on investigations on silicon-on-insulator (SOI) based infrared (IR) emitter devices heated by employing different kinds of metallic and semiconductor heater materials. Our results clearly reveal the superior high-temperature performance of semiconductor over metallic heater materials. Long-term stable emitter operation in the vicinity of 1300 K could be attained using heavily antimony-doped tin dioxide (SnO2:Sb) heater elements. KW - Biosensor KW - Hotplate KW - heater metallisation KW - high-temperature stability KW - electro-migration KW - doped silicon KW - doped metal oxide KW - antimony doped tin oxide Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1513 ER - TY - CHAP A1 - Katz, Eugenii A1 - Willner, Itamar T1 - Magneto-controlled quantized electron transfer to surface-confined redox units and metal nanoparticles N2 - Hydrophobic magnetic nanoparticles (NPs) consisting of undecanoate-capped magnetite (Fe3O4, average diameter ca. 5 nm) are used to control quantized electron transfer to surface-confined redox units and metal NPs. A two-phase system consisting of an aqueous electrolyte solution and a toluene phase that includes the suspended undecanoatecapped magnetic NPs is used to control the interfacial properties of the electrode surface. The attracted magnetic NPs form a hydrophobic layer on the electrode surface resulting in the change of the mechanisms of the surface-confined electrochemical processes. A quinone-monolayer modified Au electrode demonstrates an aqueous-type of the electrochemical process (2e-+2H+ redox mechanism) for the quinone units in the absence of the hydrophobic magnetic NPs, while the attraction of the magnetic NPs to the surface results in the stepwise single-electron transfer mechanism characteristic of a dry nonaqueous medium. Also, the attraction of the hydrophobic magnetic NPs to the Au electrode surface modified with Au NPs (ca. 1.4 nm) yields a microenvironment with a low dielectric constant that results in the single-electron quantum charging of the Au NPs. KW - Biosensor KW - Nanoparticles KW - magnetic particles KW - quantum charging KW - modified electrode Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1528 ER - TY - CHAP A1 - Pijanowska, Dorota G. A1 - Remiszewska, Elzbieta T1 - pH-based detection of phenylalnine by potentiometric and colorimetric methods N2 - In this paper, methods of sample preparation for potentiometric measurement of phenylalanine are presented. Basing on the spectrophotometric measurements of phenylalanine, the concentrations of reagents of the enzymatic reaction (10 mM L-Phe, 0,4 mM NAD+, 2U L-PheDH) were determined. Then, the absorption spectrum of the reaction product, NADH, was monitored (maximum peak at 340 nm). The results obtained by the spectrophotometric method were compared with the results obtained by the colourimetry, using pH indicators. The above-mentioned two methods will be used as references for potentiometric measurements of phenylalanine concentration. KW - Biosensor KW - Phenylalanine determination KW - enzymatic methods KW - pH-based biosensing Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1536 ER - TY - CHAP A1 - Arida, Hassan A. A1 - Kloock, Joachim P. A1 - Schöning, Michael Josef T1 - Novel organic membrane-based thin-film microsensors for the determination of heavy metal cations N2 - A first step towards the fabrication and electrochemical evaluation of thin-film microsensors based on organic PVC membranes for the determination of Hg(II), Cd(II), Pb(II) and Cu(II) ions in solutions has been realised. The membrane-coating mixture used in the preparation of this new type of microsensors is incorporating PVC as supporting matrix, o-nitrophenyloctylether (o-NPOE) as solvent mediator and a recently synthesized Hg[dimethylglyoxime(phene)]2+ and Bis-(4-hydroxyacetophenone)-ethylenediamine as electroactive materials for Hg(II) and Cd(II), respectively. A set of three commercialised ionophores for Cd(II), Pb(II) and Cu(II) has been also used for comparison. Thin-film microsensors based on these membranes showed a Nernstian response of slope (26-30 mV/dec.) for the respective tested cations. The potentiometric response characteristics (linear range, pH range, detection limit and response time) are comparable with those obtained by conventional membranes as well as coated wire electrodes prepared from the same membrane. The realisation of the new organic membrane-based thin-film microsensors overcomes the problem of an insufficient selectivity of solid-state-based thinfilm sensors. KW - Biosensor KW - Heavy metal detection KW - thin-film microsensors KW - organic PVC membranes Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1545 ER - TY - CHAP A1 - Barek, Jiri A1 - Fischer, Jan A1 - Navratil, Tomas A1 - Peckova, Karolina A1 - Yosypchuk, Bogdan T1 - Silver solid amalgam electrodes as sensors for chemical carcinogens N2 - The applicability of differential pulse voltammetry (DPV) and adsorptive stripping voltammetry (AdSV) at a non-toxic meniscus-modified silver solid amalgam electrode (m-AgSAE) for the determination of trace amounts of genotoxic substances was demonstrated on the determination of micromolar and submicromolar concentrations of 3-nitrofluoranthene using methanol - 0.01 mol L-1 NaOH (9:1) mixture as a base electrolyte and of Ostazine Orange using 0.01 mol L-1 NaOH as a base electrolyte. KW - Biosensor KW - Solid amalgam electrodes KW - voltammetry KW - carcinogens KW - 3-nitrofluoranthene KW - Ostazine Orange Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1554 ER - TY - CHAP A1 - Baronas, Romas A1 - Ivanauskas, Feliksas A1 - Kulys, Juozas T1 - Mathematical modeling of biosensors based on an array of enzyme microreactors N2 - This paper presents a two-dimensional-in-space mathematical model of biosensors based on an array of enzyme microreactors immobilised on a single electrode. The modeling system acts under amperometric conditions. The microreactors were modeled by particles and by strips. The model is based on the diffusion equations containing a nonlinear term related to the Michaelis-Menten kinetics of the enzymatic reaction. The model involves three regions: an array of enzyme microreactors where enzyme reaction as well as mass transport by diffusion takes place, a diffusion limiting region where only the diffusion takes place, and a convective region, where the analyte concentration is maintained constant. Using computer simulation, the influence of the geometry of the microreactors and of the diffusion region on the biosensor response was investigated. The digital simulation was carried out using the finite difference technique. KW - Biosensor KW - Reaction-diffusion KW - modeling biosensor KW - microreactor Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1569 ER - TY - CHAP A1 - Weßling, Matthias T1 - Como motivar a si mesmo e aos outros - o valor dos 16 Motivos Vitais para Liderança N2 - O Perfil Reiss apresenta no resultado uma visão da estrutura dos motivos e impulsos de uma pessoa. O ponto de saída para a análise do resultado é o conhecimento de que os motivos vitais (= valores e metas de sobrevivência) formam a moldura, na qual as competências e capacidades que uma pessoa possui possam se desabrochar de forma ideal. A partir desse princípio, não existe no Perfil Reiss nenhum resultado que se possa classificar como correto ou falso, nem como bom ou mau. Uma comparação entre o resultado do Perfil Reiss e o conteúdo de uma atividade apresentada ou ambicionada dá informação sobre até que ponto a capacidade de rendimento de uma pessoa nessa posição pode vir ou virá a se desenvolver por um longo tempo. N2 - Das Reiss-Profil der 16 Lebensmotive ist Ergebnis einer umfassenden, länderübergreifenden empirischen Datenerhebung und beruht auf einer bislang einzigartigen empirischen Forschungsbasis. Es überprüft die Kongruenz zwischen dem Anforderungsprofil eines Stelle und dem Motivationsprofil eines Menschen. Das Reiss-Profil lässt bewusste und unbewusste Motive und Antriebe von Mitarbeitern erkennen, die neue Management-Firmeninitiativen blockieren oder fördern können. Bereits im Vorfeld werden für den einzelnen Mitarbeiter außerordentlich wichtige Werte anhand ihres Motivprofils erkannt und können besser in die Gruppe integriert werden. Im Endergebnis verdeutlicht diese Perspektive für die betriebliche Mitarbeitermotivation eine vollkommene Individualisierung, wenngleich das Ausmaß auch kulturabhängig relativiert werden muß. T2 - How to motivate yourself and other people - the value of the 16 basic desires for leadership KW - Führung KW - Motivation KW - Führung KW - Motivation KW - Leadership KW - Motivation KW - Self-Leadership Y1 - 2006 ER - TY - CHAP A1 - Lei, Yu A1 - Mulchandani, Priti A1 - Chen, Wilfred A1 - Mulchandani, Ashok T1 - Biosensor for direct determination of fenitrothion and EPN using recombinant Pseudomonas putida JS444 with surface expressed organophosphorus hydrolase. 1. modified clark oxygen electrode N2 - This paper reports a first microbial biosensor for rapid and cost-effective determination of organophosphorus pesticides fenitrothion and EPN. The biosensor consisted of recombinant PNP-degrading/oxidizing bacteria Pseudomonas putida JS444 anchoring and displaying organophosphorus hydrolase (OPH) on its cell surface as biological sensing element and a dissolved oxygen electrode as the transducer. Surfaceexpressed OPH catalyzed the hydrolysis of fenitrothion and EPN to release 3-methyl-4-nitrophenol and p-nitrophenol, respectively, which were oxidized by the enzymatic machinery of Pseudomonas putida JS444 to carbon dioxide while consuming oxygen, which was measured and correlated to the concentration of organophosphates. Under the optimum operating conditions, the biosensor was able to measure as low as 277 ppb of fenitrothion and 1.6 ppm of EPN without interference from phenolic compounds and other commonly used pesticides such as carbamate pesticides, triazine herbicides and organophosphate pesticides without nitrophenyl substituent. The applicability of the biosensor to lake water was also demonstrated. KW - Biosensor KW - Organophosphorus KW - fenitrothion KW - EPN KW - biosensor KW - Pseudomonas putida Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1573 ER - TY - CHAP A1 - Bührig-Polaczek, Andreas A1 - Röth, Thilo A1 - Baumeister, E. A1 - Nowack, N. A1 - Süßmann, Torsten T1 - Hybride Leichtbaustrukturen in Stahlblech-Leichtmetall Verbundguss N2 - Stahl-Leichtmetall-Hybride mit hohen Leistungspotentialen können heute wirtschaftlich abgebildet werden und eignen sich möglicherweise auch zum Einsatz in Fahrzeugkarosserien KW - Karosseriebau KW - Verbundguss KW - Stahlblech-Leichtmetall Verbundguss KW - Stahlblech-Leichtmetall-Hybride KW - Lightweight car body construction Y1 - 2006 ER - TY - CHAP A1 - Staat, Manfred T1 - Problems and chances for probabilistic fracture mechanics in the analysis of steel pressure boundary reliability. - Überarb. Ausg. N2 - In: Technical feasibility and reliability of passive safety systems for nuclear power plants. Proceedings of an Advisory Group Meeting held in Jülich, 21-24 November 1994. - Vienna , 1996. - Seite: 43 - 55 IAEA-TECDOC-920 Abstract: It is shown that the difficulty for probabilistic fracture mechanics (PFM) is the general problem of the high reliability of a small population. There is no way around the problem as yet. Therefore what PFM can contribute to the reliability of steel pressure boundaries is demon­strated with the example of a typical reactor pressure vessel and critically discussed. Although no method is distinguishable that could give exact failure probabilities, PFM has several addi­tional chances. Upper limits for failure probability may be obtained together with trends for design and operating conditions. Further, PFM can identify the most sensitive parameters, improved control of which would increase reliability. Thus PFM should play a vital role in the analysis of steel pressure boundaries despite all shortcomings. KW - Bruchmechanik KW - probabilistic fracture mechanics KW - PFM Y1 - 2006 ER - TY - CHAP A1 - Becker, Astrid T1 - Anlagenmanagement und Aufgaben der DB Netz AG, Bauherrenvertretung und Wirtschaftlichkeit N2 - In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 18 Übersicht des Vortrags KW - Anlagenwirtschaft KW - Bauherrenvertretung KW - Deutsche Bahn Netz AG Y1 - 2006 ER - TY - CHAP A1 - Wellmann, Judith T1 - Perspektiven eines Bauingenieurs im konstruktiven Ingenieurbau N2 - In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 7-12 Die Berufsperspektiven im konstruktiven Ingenieurbau werden trotz sinkendem Bedarf an Statikern positiv bewertet. KW - Ingenieurbau KW - Konstruktiver Ingenieurbau KW - Statiker KW - Berufsperspektiven Y1 - 2006 ER - TY - CHAP T1 - Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006 N2 - "Mit dem "1. Erfahrungsaustausch" im Fachbereich Bauingenieurwesen berichten Absolventen des Fachbereichs aus der Praxis. Mit diesem Treffen wird die wichtige Verbindung zwischen Hochschule, ihren Absolventen und der Berufspraxis zum besonderen Anliegen gemacht und besonders gestärkt." Zitat Prof. Dr.- Ing. Hans Boegershausen, Dekan im Grußwort. Referenten und Themen: Wellmann, Judith: Perspektiven eines Bauingenieurs im konstruktiven Ingenieurbau Dirk Gobbele, Dirk: Planung der Umbaumaßnahme Hauptbahnhof Aachen Kretschmann, Lars: Planung und Bauleitung Buschtunnel Aachen Becker, Astrid: Anlagenmanagement und Aufgaben der DB Netz AG, Bauherrenvertretung und Wirtschaftlichkeit Plenz, Michael: Baurevision und Unternehmensberatung, Tätigkeit als öffentlich bestellter und vereidigter Sachverständiger Klöcker, Alexander: Das Leitungsbauunternehmen – Unternehmerische Strategie als Zukunftssicherung Türk, Roman: Sanierung von Hausanschlüssen Bornebusch, Michael: Hydraulische und Hydrologische Modellsimulationen als Planungswerkzeug für Hochwasser-Schutz-Maßnahmen Himmerich, Jörg : Pipeline Integrity Management System – Probabilistische Bewertung von Bauwerken am Beispiel von Hochdruckleitungen. KW - Aachen / Fachhochschule Aachen / Fachbereich Bauingenieurwesen KW - Alfha.net KW - Alumni KW - Absolvententreffen Y1 - 2006 ER - TY - CHAP A1 - Gobbelé, Dirk T1 - Planung der Umbaumaßnahme Hauptbahnhof Aachen N2 - In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 13-15. Bericht über die infrastrukturellen Maßnahmen zum Umbau des Hauptbahnhofs Aachen. KW - Bauplanung KW - Umbauplanung KW - Verkehrsbau KW - Hauptbahnhof Aachen Y1 - 2006 ER - TY - CHAP A1 - Kretschmann, Lars T1 - Planung und Bauleitung Buschtunnel Aachen N2 - In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 16-17 Der Umbau des Aachener Buschtunnels im Rahmen des europäischen Hochgeschwindigkeitsschienennetzes wird im sogenannten "Neuen Österreichischen Tunnelbauverfahren (NOeT)", also ein Ausbau in Kalotte, Strosse und Sohle durchgeführt. KW - Bauplanung KW - Bauführung KW - Bauleitung KW - Tunnelbau Y1 - 2006 ER - TY - CHAP A1 - Plenz, Michael T1 - Baurevision und Unternehmensberatung, Tätigkeit als öffentlich bestellter und vereidigter Sachverständiger N2 - In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 19-20. Zusammenfassung des Vortrags: Prozessanalyse und Revision beim Umbau des Flughafens Hamburg, Beratung von Bauunternehmen, Sachverständigentätigkeit KW - Öffentlich bestellter Sachverständiger KW - Baurevision Y1 - 2006 ER - TY - CHAP A1 - Klöcker, Alexander T1 - Das Leitungsbauunternehmen - unternehmerische Strategie als Zukunftssicherung N2 - In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 21-22 Zusammenfassung des Vortrags KW - Leitungsbau KW - Leitungsbauunternehmen Y1 - 2006 ER - TY - CHAP A1 - Türk, Roman T1 - Sanierung von Hausanschlüssen N2 - In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 23-24. Zusammenfassung des Vortrags. KW - Hausanschluss KW - Abwasser KW - Kanalnetz KW - Kanalbetrieb Y1 - 2006 ER - TY - CHAP A1 - Moreno, Lia A1 - Dosev, D. A1 - Bratov, A. A1 - Dominguez, C. A1 - Schöning, Michael Josef A1 - Kloock, Joachim P. T1 - Effect of electrical properties of the surrounding medium on the response of an interdigitated electrode array with chalcogenide glass film T2 - XX Eurosensors : 20th anniversary ; Göteborg, Sweden, 17 - 20 September 2006 ; [proceedings]. - Vol. 1 Y1 - 2006 SN - 978-91-631-9280-7 N1 - Paper number: T1A-P22 SP - 384 EP - 385 CY - Göteborg ER - TY - CHAP A1 - Vedral, Andreas A1 - Wollert, Jörg A1 - Buda, A. A1 - Altrock, R. T1 - The capability of bluetooth for real-time transmission in automation T2 - Proceedings of the IASTED International Conference on Networks and Communication Systems 2006 : March 29 - 31, 2006, Chiang Mai, Thailand Y1 - 2006 SP - 168 EP - 175 PB - Acta Pr. CY - Anaheim, Calif. ER - TY - CHAP A1 - Vedral, A. A1 - Wollert, Jörg T1 - Analysis of error and time behavior of the IEEE 802.15.4 PHY-layer in an industrial environment T2 - Proceedings / 2006 IEEE International Workshop on Factory Communication Systems : June 28th - 30th, 2006 Y1 - 2006 SN - 1-4244-0379-0 SP - 119 EP - 124 PB - IEEE Operations Center CY - Piscataway, NJ ER - TY - CHAP A1 - Vredal, Andreas A1 - Wollert, Jörg T1 - Praktische Untersuchungen zur Reduzierung der Restfehlerrate von Funksystemen T2 - Wireless Automation : Chancen, Lösungen, Risiken ; Tagung Darmstadt, 8. und 9. Mai 2006. (VDI-Berichte ; 1939) Y1 - 2006 SN - 3-18-091939-6 SP - 135 EP - 146 PB - VDI-Verl. CY - Düsseldorf ER - TY - CHAP A1 - Vedral, Andreas A1 - Wollert, Jörg T1 - Die Analyse industrieller funkgestützter Kommunikationskanäle T2 - Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2006, Fachmesse & Kongress, 28. - 30. Nov. 2006, Nürnberg Y1 - 2006 SN - 9783800729944 SP - 279 EP - 288 PB - VDE-Verl. CY - Berlin ER - TY - CHAP A1 - Vedral, Andreas A1 - Wollert, Jörg T1 - Praktische Untersuchungen zum zeitlichen Übertragungs- und Bündelfehlerverhalten der IEEE 802.15.4 T2 - ZigBee & Co. - drahtlose Nahbereichsnetzwerke : 04. April 2006, München Y1 - 2006 PB - Design&Elektronik CY - Poing ER - TY - CHAP A1 - Herrmann, Ulf A1 - Worringer, S. A1 - Graeter, F. A1 - Nava, P. ED - Romero, Manuel T1 - Three Years of Operation Experience of the SKAL-ET Collector Loop at SEGS V T2 - 13th International Symposium Concentrated Solar Power and Chemical Energy Technologies, June 20 - 23, 2006, Seville, Spain Y1 - 2006 SN - 84-7834-519-1 PB - SolarPACES [u.a.] CY - [s.l.] ER - TY - CHAP A1 - Pietsch, Wolfram A1 - Herzwurm, Georg A1 - Zander, Dietmar T1 - Assuring quality of QFD-education in Germany T2 - ISQFD'06: 12th International Symposium on QFD : Tokyo, 07.-09.2006 Y1 - 2006 SP - 1 EP - 6 ER - TY - CHAP A1 - Poghossian, Arshak A1 - Ingebrandt, S. A1 - Platen, J. A1 - Schöning, Michael Josef T1 - Field-effect sensors with charged macromolecules – from micro towards nano aspects T2 - Biochemical Sensing Utilisation of Micro-and Nanotechnologies, Warschau, Nov. 2005 : Lecture Notes of the ICB Seminar / ed.: M. Mascini, W. Torbicz Y1 - 2006 SP - 74 EP - 81 PB - Polish Academy Sciences Press CY - Warsaw ER - TY - CHAP A1 - Renault, Philippe A1 - Butenweg, Christoph A1 - Meskouris, Konstantin T1 - Baudynamische Untersuchung von Brückenbauwerken im Kölner Raum T2 - Baudynamik : Tagung Kassel, 17. und 18. Mai 2006 / VDI-Gesellschaft Entwicklung, Konstruktion, Vertrieb. (VDI-Berichte ; 1941) Y1 - 2006 SN - 3-18-091941-8 SP - 121 EP - 140 PB - VDI-Verlag CY - Düsseldorf ER - TY - CHAP A1 - Meskouris, Konstantin A1 - Mistler, Michael A1 - Butenweg, Christoph T1 - Mauerwerksbauten unter Erdbebenbelastung T2 - Numerische Methoden zur Problemlösung im konstruktiven Bauwesen : 34. Aachener Baustofftag ; 02. Februar 2006 Y1 - 2006 PB - IBAC CY - Aachen ER - TY - CHAP A1 - Kob, Malte A1 - Gömmel, Andreas A1 - Butenweg, Christoph A1 - Niendorf, Thoralf T1 - Training of a combined model of larynx and vocal folds with data from MRI measurements T2 - The 5th International Conference on Voice Physiology and Biomechanics: Variations across Cultures and Species, July 12-14, 2006, Tokyo, Japan. Proceedings Y1 - 2006 SP - 45 EP - 46 ER - TY - CHAP A1 - Butenweg, Christoph A1 - Mistler, Michael T1 - Seismic resistance of unreinforced masonry buildings T2 - Proceedings of the Eighth International Conference on Computational Structures Technology : [Las Palmas de Cran Canaria, 12-15 September 2006] / ed. by B. H. V. Topping ... Y1 - 2006 SN - 1-905088-06-X U6 - http://dx.doi.org/10.4203/ccp.83.9 SP - Paper 9 PB - Civil-Comp Press CY - Stirling ER - TY - CHAP A1 - Deterding, A. A1 - Tippkötter, Nils A1 - Ulber, R. ED - Beckmann, Dieter T1 - Online-Essigsäureanalytik in Fermentationsbrühen mittels Fließdiffusionstechnik (FDT) T2 - Technische Systeme für Biotechnologie und Umwelt : 13. Heiligenstädter Kolloquium, Heilbad Heiligenstadt, 25.09. - 27.09.2006 Y1 - 2006 SN - 978-3-00-018621-9 SP - 273 EP - 280 CY - Heiligenstadt ER - TY - CHAP A1 - Schuh, G. A1 - Gottschalk, S. A1 - Höhne, Tim A1 - Cloots, M. ED - Wenzel, Sigrid T1 - Parametrierung einer Schlupfregelung in der simulativen Produktionsplanung T2 - Simulation in Produktion und Logistik 2006 : Tagungsband zur 12. Fachtagung, Kassel, 26. - 27. September 2006 Y1 - 2006 SN - 3-936150-48-6 N1 - ASIM-Mitteilung ; 104 SP - 233 EP - 243 ER - TY - CHAP A1 - Drumm, Christian A1 - Lemcke, Jens A1 - Oberle, Daniel T1 - Integrating Semantic Web Services and Business Process Management: A Real Use Case T2 - Proceedings of the ESWC 2006 Workshop Semantics for Business Process Management 2006 (SBPM 2006), June 2006 Y1 - 2006 ER - TY - CHAP A1 - Loeb, Horst W. A1 - Schartner, Karl-Heinz A1 - Seboldt, Wolfgang A1 - Dachwald, Bernd A1 - Streppel, Joern A1 - Meusemann, Hans A1 - Schülke, Peter T1 - SEP for a lander mission to the jovian moon europa T2 - 57th International Astronautical Congress N2 - Under DLR-contract, Giessen University and DLR Cologne are studying solar-electric propulsion missions (SEP) to the outer regions of the solar system. The most challenging reference mission concerns the transport of a 1.35-tons chemical lander spacecraft into an 80-RJ circular orbit around Jupiter, which would enable to place a 375 kg lander with 50 kg of scientific instruments on the surface of the icy moon "Europa". Thorough analyses show that the best solution in terms of SEP launch mass times thrusting time would be a two-stage EP module and a triple-junction solar array with concentrators which would be deployed step by step. Mission performance optimizations suggest to propel the spacecraft in the first EP stage by 6 gridded ion thrusters, running at 4.0 kV of beam voltage, which would save launch mass, and in the second stage by 4 thrusters with 1.25 to 1.5 kV of positive high voltage saving thrusting time. In this way, the launch mass of the spacecraft would be kept within 5.3 tons. Without a launcher's C3 and interplanetary gravity assists, Jupiter might be reached within about 4 yrs. The spiraling-down into the parking orbit would need another 1.8 yrs. This "large mission" can be scaled down to a smaller one, e.g., by halving all masses, the solar array power, and the number of thrusters. Due to their reliability, long lifetime and easy control, RIT-22 engines have been chosen for mission analysis. Based on precise tests, the thruster performance has been modeled. Y1 - 2006 U6 - http://dx.doi.org/10.2514/6.IAC-06-C4.4.04 N1 - 57th International Astronautical Congress, 02 October 2006 - 06 October 2006, Valencia, Spain. SP - 1 EP - 12 ER - TY - CHAP A1 - Dachwald, Bernd A1 - Kahle, Ralph A1 - Wie, Bong T1 - Solar sail Kinetic Energy Impactor (KEI) mission design tradeoffs for impacting and deflecting asteroid 99942 Apophis T2 - AIAA/AAS Astrodynamics Specialist Conference and Exhibit N2 - Near-Earth asteroid 99942 Apophis provides a typical example for the evolution of asteroid orbits that lead to Earth-impacts after a close Earth-encounter that results in a resonant return. Apophis will have a close Earth-encounter in 2029 with potential very close subsequent Earth-encounters (or even an impact) in 2036 or later, depending on whether it passes through one of several so-called gravitational keyholes during its 2029-encounter. Several pre-2029-deflection scenarios to prevent Apophis from doing this have been investigated so far. Because the keyholes are less than 1 km in size, a pre-2029 kinetic impact is clearly the best option because it requires only a small change in Apophis' orbit to nudge it out of a keyhole. A single solar sail Kinetic Energy Impactor (KEI) spacecraft that impacts Apophis from a retrograde trajectory with a very high relative velocity (75-80 km/s) during one of its perihelion passages at about 0.75 AU would be a feasible option to do this. The spacecraft consists of a 160 m x 160 m, 168 kg solar sail assembly and a 150 kg impactor. Although conventional spacecraft can also achieve the required minimum deflection of 1 km for this approx. 320 m-sized object from a prograde trajectory, our solar sail KEI concept also allows the deflection of larger objects. In this paper, we also show that, even after Apophis has flown through one of the gravitational keyholes in 2029, solar sail Kinetic Energy Impactor (KEI) spacecraft are still a feasible option to prevent Apophis from impacting the Earth, but many KEIs would be required for consecutive impacts to increase the total Earth-miss distance to a safe value. In this paper, we elaborate potential pre- and post-2029 KEI impact scenarios for a launch in 2020, and investigate tradeoffs between different mission parameters. KW - Solar Sail KW - Asteroid Deflection KW - Planetary Protection KW - Trajectory Optimization Y1 - 2006 U6 - http://dx.doi.org/10.2514/6.2006-6178 N1 - AIAA/AAS Astrodynamics Specialist Conference and Exhibit, 21 August 2006 - 24 August 2006, Keystone, Colorado(USA). SP - 1 EP - 20 ER - TY - CHAP A1 - Huth, Thomas A1 - Elsen, Olaf A1 - Hartwig, Christoph A1 - Esch, Thomas T1 - Innovative modular valve trains for 2015 - logistic benefits by EMVT T2 - IFAC Proceedings Volumes, Volume 39, Issue 3 N2 - In this paper the way to a 5-day-car with respect to a modular valve train systems for spark ignited combustion engines is shown. The necessary product diversity is shift from mechanical or physical components to software components. Therefore, significant improvements of logistic indicators are expected and shown. The working principle of a camless cylinder head with respect to an electromagnetical valve train (EMVT) is explained and it is demonstrated that shifting physical diversity to software is feasible. The future design of combustion engine systems including customisation can be supported by a set of assistance tools which is shown exemplary. Y1 - 2006 U6 - http://dx.doi.org/10.3182/20060517-3-FR-2903.00172 N1 - Part of special issue "12th IFAC Symposium on Information Control Problems in Manufacturing" SP - 315 EP - 320 PB - Elsevier CY - Amsterdam ER - TY - CHAP A1 - Lohr, Jürgen T1 - High Quality Streaming und High Definition Media Services N2 - In: Konferenzband zur Konferenz Medienproduktion 2007, 1.12.2008. 29 S. High Quality Streaming beschäftigt sich mit High Definition Television und Mehrkanal Sound. In diesem Beitrag werden die Technologien und Anwendungsperspektiven für HD Medien-Dienstleistungen beschrieben. Der Beitrag entstand im Rahmen der Konferenz Medienproduktion „Expansion und Mobilität“ am 7. Dezember 2007. Der Beitrag beschreibt Geschäftsmodelle, Technologien und neue Anwendungen für High Quality Streaming. Neben der Präsentation wurden auch die Medienproduktionen der unterschiedlichen HQ-Mediendienste vorgeführt. Die Mediendienste sind im Rahmen der Forschungsarbeit High Quality Media Services des Studiengangs Communication and Multimedia Design (Fachbereich Elektrotechnik und Informationstechnik) an der Fachhochschule Aachen entstanden. Eine Marktevaluierung der deutschen und niederländischen Märkte, internationale Expertengesprächen sowie ein Prototypen HDMediaservices bilden die Basis der Forschungsarbeit. Die Mediendienste stehen zur Demonstration unter dem Link media.fh-aachen.de bereit. HQ-Mediendienste bedeuten: Gestochen scharfe Bilder in High Definition, volle Klänge in Surround und das über das Internet, wo doch gerade mal die briefmarkengroßen Bilder mit unscharfen Konturen und krätzenden Klängen der heutigen Portale wie YouTube Alltag sind. KW - HDTV KW - High Quality Streaming KW - High Definition Media Services Y1 - 2007 ER - TY - CHAP A1 - Otterbach, Jörg T1 - Eine Reise in die Unterwelt : Kanalinspektion und Sanierungsplanung N2 - Dipl.-Ing. Jörg Otterbach vom Wasserverband Eifel-Rur mit einem Praxisbericht auf 21 Seiten (S. 7-27). Der Vortrag wurde gehalten beim 1. [Ersten] Aachener Softwaretag in der Wasserwirtschaft <1, 2007, Aachen> an der FH Aachen / Fachbereich Bauingenieurwesen. KW - Wasserbau KW - Kanalisierung KW - Kanalsanierung KW - Kanalinspektion KW - Schachterfassung Y1 - 2007 ER - TY - CHAP A1 - Hecker, Dirk T1 - Hochwasservorsorge für Abwasseranlagen (DWA-M103) und öffentliche Einrichtungen N2 - Dipl.-Ing. Dirk Hecker von der Ingenieurgesellschaft Tuttahs & Meyer in Aachen. Vortrag gehalten beim 1. Aachener Softwaretag in der Wasserwirtschaft <1, 2007, Aachen> 27 S. (S. 28-54) Zusammenfassung [des Autors]: Nach den spektakulären Hochwasserereignissen an Rhein, Elbe und Donau hat die Deutsche Vereinigung für Wasserwirtschaft, Abwasser und Abfall e. V. (DWA) einen Fachausschuss zur Erstellung eines Merkblattes M 103 „Hochwasserschutz für Abwasseranlagen“ berufen. Das Merkblatt zeigt in den Kapiteln Konzeption, Planungsgrundsätze und Hochwassermanagement eine strukturierte Vorgehensweise zur bestmöglichen Vorsorge zum Schutz der Abwasseranlagen im Hochwasserfall. Entsprechend den Forderungen des im Jahr 2005 verabschiedeten Gesetzes zur Verbesserung des vorbeugenden Hochwasserschutzes, floss in das Wasserhaushaltsgesetz unter anderem die allgemeine Verpflichtung jedes potentiell vom Hochwasser Betroffenen ein, geeignete Schutzmaßnahmen zur Schadensminimierung zu treffen. Hierbei werden speziell die Wasserversorgung und die Abwasserbeseitigung erwähnt. Im DWA-M 103 wir detailliert dargestellt wie und mit welchem Aufwand die Abwasseranlagen zu überprüfen sind und wie hierzu ein Hochwasserschutzkonzept erstellt werden kann. Zusätzlich werden Hinweise für die Planung von Abwasseranlagen in hochwassergefährdeten Bereichen gegeben, die den störungsfreien Betrieb im Hochwasserfall gewährleisten sollen. Schlussendlich werden das Hochwassermanagement und der Betrieb dargestellt und hier wichtige Anregungen gegeben im Ernstfall ausreichend vorbereitet zu sein. Das DWA-M 103 richtet sich in erster Linie an die Betreiber und Planer von Abwasseranlagen. Jedoch werden hier auch, gerade durch die Vielzahl von Checklisten, Kommunen Denkanstöße und Anregungen für die Hochwasservorsorge/-schutz von öffentlichen Gebäuden und Einrichtungen gegeben. KW - Hochwasserschutz KW - Abwasseranlage KW - Hochwasservorsorge KW - Abwasseranlage Y1 - 2007 ER - TY - CHAP A1 - Stegmaier, Martin T1 - Abdichtungen in Kanälen und Schächten mittels Injektionsverfahren N2 - Abstract des Beitrags zum 1. Aachener Softwaretag in der Wasserwirtschaft <1, 2007, Aachen> 1 S. : Bereits seit Jahrzehnten werden verschiedenste Injektions-Verfahren, welche teilweise aus den Vereinigten Staaten lizenziert wurden, in Deutschland angewendet, um Abwasserkanäle zu ertüchtigen. Die Resultate sind teilweise sehr umstritten, nicht zuletzt aufgrund unzureichender Materialeigenschaften in den Anfangsjahren der Anwendung. Viele Methoden sind darüber völlig aus dem Gebrauch gekommen und haben manchmal das ganze Verfahrensprinzip in Verruf gebracht. Mittlerweile wurden sowohl Verfahren als auch Materialien weiterentwickelt und sind nun in der Lage auch den aktuellen strengen und praxisnahen Testverfahren mittels Säuleninjektionsversuchen zur Beurteilung Umweltverträglichkeit zu genügen. Es wird ein kurzer Überblick über die derzeit am Markt befindlichen/üblichen Regelwerke, Verfahren und Materialien gegeben und die Grenzen und Möglichkeiten im Rahmen der Kanalsanierung aufgezeigt. KW - Kanalbau KW - Abdichtung KW - Kanalbau KW - Kanal KW - Abwasser KW - Abdichtung Y1 - 2007 ER - TY - CHAP A1 - Fuchs, Lothar T1 - Abflusssteuerung in der Stadtentwässerung N2 - Dr.-Ing. Lothar Fuchs vom itwh Hannover mit 13 Seiten (S. 57-69) Beitrag zum 1. Aachener Softwaretag in der Wasserwirtschaft <1, 2007, Aachen> Zusammenfassung [des Autors] Die wesentlichen technischen Probleme der Kanalnetzbewirtschaftung sind gelöst. Der Markt bietet bewährte Messgeräte, Steuerungseinrichtungen, Datenübertragungs-, Regler- und Rechnersysteme, die sich für den Einsatz in der Stadtentwässerung eignen. Mit den heute existierenden Simulationsmodellen können die Auswirkungen von Bewirtschaftungssystemen abgeschätzt werden, bevor diese implementiert werden. Die für Bewirtschaftungssysteme notwendige Ausrüstung ist eine andere, als die traditionell in der Stadtentwässerung übliche. Sie erfordert in jedem Fall mehr und teureren Wartungsaufwand sowie anders ausgebildetes Personal. Bei einem Kostenvergleich mit konventionellen (d.h. ungesteuerten) Systemen muß die umfassende Information und Kontrolle des bewirtschafteten Systems berücksichtigt werden. Die permanente Information über den Betriebszustand sowie die in allen existierenden Bewirtschaftungssystemen erreichten Verminderungen von Regenentlastungen und (in geringerem Maße) hydraulischen Überlastungen lassen es geraten erscheinen, Kanalnetzbewirtschaftung nicht nur unter dem Gesichtspunkt der höheren Betriebskosten, sondern auch denen der möglich Einsparungen von Investitionen und der höheren Effizienz zu beurteilen. Analog lässt sich zeigen, dass bewirtschaftete Systeme kleiner ausgelegt werden können und dennoch die gleiche Effizienz besitzen wie größer dimensionierte, statisch wirkende Systeme. KW - Wasserbau KW - Kanalisierung KW - Stadtentwässerung KW - Abflusssteuerung Y1 - 2007 ER - TY - CHAP A1 - Engels, Ralf T1 - MIKE URBAN FLOOD: Modellkopplung von Kanalnetzmodell und 2D Oberflächenmodell N2 - Dipl.-Ing. Ralf Engels - DHI Wasser und Umwelt GmbH, Syke. 24 S. (S. 70-93) Beitrag zum 1. Aachener Softwaretag in der Wasserwirtschaft <1,2007, Aachen> Einleitung [des Autors] Die hydrodynamische Kanalnetzmodellierung ist ein Standardwerkzeug für die Bemessung von Kanalnetzen. Neben der Berechnung der hydrologischen und hydraulischen Gegebenheiten in einem städtischen Einzugsgebiet gehören auch weiterführende Technologien mittlerweile zum Standard. So können alle steuerbaren Elemente eines Kanalnetzes dynamisch so optimiert werden, dass die Leistungsfähigkeit des Kanalnetzes zusätzlich gesteigert werden kann. Automatische Werkzeuge zur dynamischen hydraulischen Schmutzfrachtberechnung ermöglichen die Erweiterung der Steuerung – insbesondere von Entlastungsanlagen – im Hinblick auf die entlasteten Schmutzfrachten und geben darüber hinaus detaillierte Informationen für den Betrieb der Kläranlage. Weiterführende biologische Prozessmodellierungen ergänzen dieses Themenfeld. GIS Werkzeuge können bei der räumlich differenzierten Modellierung von Kanalnetzen wertvolle Dienste leisten. Die detaillierte Betrachtung einzelner Haltungsflächen in ihrem räumlichen Zusammenhang ist damit ebenso möglich wie eine komplette Verwaltung aller für die Kanalnetzmodellierung notwendigen Daten in einem übersichtlichen grafischen Menü. Die Grenzen der Kanalnetzmodellierung lagen in früheren Zeiten an dessen Rand. Detaillierte Informationen über die Wege des Wassers auf der Geländeoberfläche, an der Schnittstelle zu Vorflutern und in der Interaktion mit Grundwasser waren bisher nicht modelltechnisch bewertbar. Eine dynamische Kopplung verschiedener Modelle zur Darstellung aller relevanten hydraulischen Prozesse ermöglicht eine integrative Betrachtung aller möglichen Wege, die das Wasser in der Stadt nehmen kann (Mark & Djordjevic, 2006). Dieser Beitrag präsentiert den Stand der Technik für die integrierte Modellierung städtischer Überschwemmungen mit Hilfe der Modellkopplung von Oberflächenmodellen und Kanalnetzmodellen. KW - Bemessung KW - Kanalisation KW - Kanalnetzmodellierung KW - Kanalnetz Y1 - 2007 ER - TY - CHAP A1 - Herzog, Rudolf T1 - Das Oberflächenabflussmodell von Keser und die Grenzwertmethode : Die Abflussbildung im Vergleich. N2 - Dipl.-Ing. Rudolf Herzog , Rehm Software Berg / Ravensburg. 9 S. (S. 94-102). Beitrag zum 1. Aachener Softwaretag in der Wasserwirtschaft a1, 2007, Aachen>. Zusammenfassung [des Autors] Die grundlegenden Ansätze der beiden Modelle sind ähnlich. Der hauptsächliche Unterschied liegt darin, dass die Grenzwertmethode die Angabe einer Bodenart erfordert, die ihrerseits wieder Probleme verursachen kann. Es kann nicht davon ausgegangen werden, dass die Bodenarten homogen anliegen. Die ersatzweise Vorgabe einer für alle Einzugsgebiete einheitlichen Bodenart hilft da nicht wirklich weiter. Es stellt sich vielmehr die Frage, ob der zusätzliche Aufwand eine signifikante Verbesserung des Ereignisses zur Folge hat. Der Vorteil der Grenzwertmethode liegt auf der Hand: Die Parameterwahl ermöglicht eine flexible Steuerung des Modells, in die Abflussbildung kann differenziert eingegriffen werden. Das NA-Geschehen kann weitgehend kalibriert werden. Es ist allerdings auch zu bedenken, dass die Flexibilität des Modells risikobehaftet ist - die Abflussbildung kann nach Belieben beeinflusst werden. Fazit: Flexibel in der Anwendung, bei NA-Messung empfehlenswert. Im Allgemeinen geringere Abflussmengen als Keser. Die Blackbox von Keser ist zwar nicht steuerbar, entzieht sich damit aber auch Wissensdefiziten und Manipulationseinflüssen. Über Parameter und deren Auswirkungen muss nicht spekuliert werden. Wenn mehrere Personen mit dem Modell von Keser arbeiten, ergeben sich im Gegensatz zur Grenzwertmethode zwangsweise dieselben Ergebnisse - gleiche geometrische Oberflächendaten vorausgesetzt. Außerdem kommt Keser ohne die Bodenart aus. Fazit: Bei BFG >20%, einfache Handhabung, geringer Aufwand. Gegenüber der Grenzwertmethode (mittlere Verhältnisse) jedoch etwas höhere Abflüsse. Das Programmpaket HYKAS der Fa. Rehm Software ermöglicht u.a. den Nachweis von Kanalnetzen und bietet in diesem Zusammenhang beide Modellansätze zur Auswahl an. Der Programmanwender kann damit eine am Datenbestand bzw. an den Vorgaben des Auftraggebers ausgerichtete Modellauswahl treffen. Die realitätsnahe Ermittlung der Oberflächenabflüsse ist kompliziert. Weitere Unwegsamkeiten warten nach der Abflussbildung bei der Abflusskonzentration auf: Es ist z.B. die Festlegung der Fließlänge auf der Oberfläche erforderlich... Es ist noch ein weiter Weg bis zur Kläranlage. KW - Entwässerung KW - Abflussmessung KW - Abflussbildung KW - Oberflächenabflussmodell Y1 - 2007 ER - TY - CHAP A1 - Rohde, Raju M. T1 - Integrierte Implizite Kanalnetzberechnung mit BaSYS-HydroCAD N2 - Dr.-Ing. Raju M. Rohde , Dorsch Consult Wasser und Umwelt GmbH, München mit 32 Folien (S. 103-134). Beitrag zum 1. Aachener Softwaretag in der Wasserwirtschaft <1, 2007, Aachen>. Das System BaSYS.L.E.O. Ganglinien-Volumen-Methode Hydrodynamische Kanalnetzberechnung Hydraulische Objekte Hydrodynamische Schmutzfrachtberechnung KW - Kanalisation KW - Kanalnetz KW - Kanalnetzberechnung Y1 - 2007 ER - TY - CHAP A1 - Andorfer, Johann T1 - Parallelisierung und verteiltes Rechnen - Chancen für die Langzeitsimulation N2 - Dipl.Ing. Johann Andorfer , Tandler.com GmbH, Buch a. Erlbach. Abstract zum 1. Aachener Softwaretag in der Wasserwirtschaft <1,2007, Aachen>. 2 S. (S. 136-137) Eine nachhaltige Sicherung der Funktionalität und der ökologischen Verträglichkeit eines mittleren bis großen Kanalnetzes erfordert eine umfassende und detaillierte Modellierung in Raum und Zeit. Um den in den Richtlinien geforderten statistischen Anforderungen gerecht zu werden und die jährlichen Häufigkeiten, Mengen und Zeiträume der Belastungen erwartungstreu abschätzen zu können, ist es zielführend und notwendig, lange Zeiträume und die Gesamtheit der Einzugsgebiete möglichst detailliert zu betrachten. Die hydraulische Funktionalität und Sicherheit soll meistens mit Hilfe zeitsymmetrischer (hydrodynamischer) Verfahren nur durch Betrachtung von Modellregen, allenfalls Regenserien, sichergestellt werden. Für die Abschätzung der jährlich zu erwartenden Emissionen in unsere natürlichen Gewässer mit ihren Mengen, Frequenzen und Dauern werden normalerweise Langzeitsimulationen natürlicher Regenreihen über möglichst große Zeiträume mit zeitasymmetrischen (hydrologischen) Verfahren durchgeführt. Die betrachteten Kanalnetze werden zumeist vereinfacht (Grobnetze), um die Rechenzeiten erträglicher zu gestalten. Wünschenswert wäre jedoch eine allen Anforderungen gerecht werdende wirklichkeitsnahe Modellierung des gesamten Kanalnetzes in all seinen Details, Vermaschungen und Wechselwirkungen (Feinnetz) und dessen zeitsymmetrische und damit verlässliche Simulation mit langjährigen Regenreihen. Bereits vor 15 Jahren wurde im Hause Tandler begonnen, die Berechnungssoftware durch Parallelisierung auf symmetrische Multiprozessortechnologien auszurichten. In neuerer Zeit hält diese Technik durch die Mehrkernprozessoren in normalen Notebooks und PCs Einzug in die Ingenieurbüros und Abwasserbetriebe und sorgt schon für wesentliche Einsparungen an Rechenzeit. Doch erst durch die Kombination der Parallelisierung mit dem Prinzip des verteilten Rechnens (d.h. die Einbeziehung mehrerer PCs eines Netzwerkes in die Berechnung) erhält man die Chance ausreichend Rechenkapazität zur Verfügung zu stellen, um nicht nur eine einzelne Langzeitsimulation eines Feinnetzes durchzuführen, sondern sogar mehrere Sanierungsalternativen zu überprüfen. Die zukunftsweisenden Arbeiten von Dipl. Math. R. Tandler auf diesem Gebiet sind Thema dieses Vortrags. KW - Kanalisation KW - Parallelisierung KW - verteiltes Rechnen KW - Kanalnetzberechnung Y1 - 2007 ER - TY - CHAP A1 - Wolf, Martin A1 - Ulbrich, Daniel T1 - Decision-Support-System kokas zur Sanierungsplanung und Strategieentwicklung N2 - Dr.-Ing. Martin Wolf ; Dipl.-Kaufm. Daniel Ulbrich , Dr. Pecher und Partner Ingenieurgesellschaft mbH, München. 31 S. (S. 139-168). Beitrag zum 1. Aachener Softwaretag in der Wasserwirtschaft < 1, 2007, Aachen>. Zusammenfasung [der Autoren] Die öffentlichen Kanalnetze Deutschlands stellen mit einem Wert von rd. 330 Mrd. € ein enormes Anlagevermögen dar. Auf Grund des oft schlechten Zustandes und geringer Ausgaben zur Instandhaltung und Erneuerung ist zu erwarten, dass durch die gegenwärtige Sanierungspraxis eher ein Substanzwertverzehr des Kanalnetzes als ein Substanzwerterhalt im Sinne des Generationenvertrages erzielt wird. Für einen nachhaltigen Betrieb und Erhalt der Kanalnetze sind deshalb Sanierungsstrategien erforderlich, die neben den technischen und gesetzlichen Anforderungen auch den mittel- und langfristigen Substanzwertverlauf berücksichtigen. Dieser wird beeinflusst vom erforderlichen oder durchgeführten Sanierungsumfang, Art und Zusammensetzung der ausgewählten Maßnahmen sowie der zeitlichen Abfolge der Sanierungsmaßnahmen. Erheblichen Einfluss auf den Substanzwertverlauf hat zudem die Berücksichtigung der hydraulischen Verhältnisse sowie der optisch nicht sichtbaren Undichtheiten. Entsprechend ist es erforderlich, die tatsächlich vorhandenen Defizite zu ermitteln und die Sanierungsmaßnahmen sowie eine Strategie zur Umsetzung zu erarbeiten. Da sich gezeigt hat, dass alleine die Einhaltung der technischen und gesetzlichen Anforderung für einen Substanzwerterhalt nicht ausreicht, muss die geplante Strategie im Dr.-Ing. Martin Wolf 139 von 170 Decision-Support-System kokas zur Sanierungsplanung und Strategieentwicklung 1. Aachener Softwaretag in der Wasserwirtschaft Hinblick auf die nachhaltige Wertentwicklung überprüft und ggf. Anpassungen vorgenommen werden. Kurzfristig erzielte Einsparungen durch reduzierten Schadensumfang oder einseitige Maßnahmenwahl ermöglichen zwar im günstigsten Fall, die Anforderungen einzuhalten, gehen jedoch zwangsläufig zu Lasten des Substanzwertes und führen mittel- und langfristig zu einer Verschärfung der Kosten- und Gebührensituation. Der monetäre, am konkreten Sanierungsaufwand orientierte Substanzwertansatz ermöglicht dabei, technische und kaufmännische Gesichtspunkte praxisnah zu verknüpfen und den bestmöglichen Ausgleich zwischen den gegenläufigen Zielen Substanzwerterhalt und Gebührenkonstanz zu finden. KW - Kanalisation KW - Kanalsanierung Y1 - 2007 ER - TY - CHAP A1 - Stadler, Andreas M. A1 - Embs, Jan P. A1 - Zerlin, Kay A1 - Digel, Ilya A1 - Artmann, Gerhard A1 - Zaccai, Joe A1 - Büldt, Georg T1 - Temperature transitions of hemoglobin and cytosolic water diffusion in human red blood cells : [poster] N2 - Background Hemoglobin interactions in red blood cells Hemoglobin dynamics in human red blood cells Diffusion of H2O in red blood cells KW - Erythrozyt KW - Hämoglobin KW - cytosolic water diffusion KW - hemoglobin dynamics Y1 - 2007 ER - TY - CHAP A1 - Ritz, Thomas ED - König-Ries, Brigitta T1 - Die benutzerzentrierte Entwicklung mobiler Unternehmenssoftware T2 - MMS 2007: Mobilität und mobile Informationssysteme : 2nd conference of GI-Fachgruppe MMS ; March 6th, 2007 in Aachen, Germany Y1 - 2007 SN - 978-3-88579-198-0 SP - 23 EP - 35 PB - Ges. für Informatik CY - Bonn ER - TY - CHAP A1 - Kowalski, Julia A1 - Bartelt, Perry A1 - McElwaine, J. T1 - Two-phase debris flow modeling T2 - Geophysical Research Abstracts Y1 - 2007 N1 - A-08119 ER - TY - CHAP A1 - Uibel, Thomas A1 - Blaß, Hans Joachim T1 - Edge Joints with Dowel Type Fasteners in Cross Laminated Timber T2 - Proceedings. CIB-W18 Meeting 2007, Bled, Slovenia 2007 Y1 - 2007 SN - 0945-6996 N1 - Paper 40-7-2 SP - 1 EP - 11 ER - TY - CHAP A1 - Uibel, Thomas T1 - Brettsperrholz – Verbindungen mit mechanischen Verbindungsmitteln T2 - Ingenieurholzbau, Karlsruher Tage 2007 : Forschung für die Praxis; 4. und 5. Oktober 2007; Tagungsband / Universität Karlsruhe (TH), Lehrstuhl für Ingenieurholzbau und Baukonstruktionen Y1 - 2007 SP - 62 EP - 73 PB - Bruder-Verlag CY - Köln ER - TY - CHAP A1 - Ringbeck, Thorsten A1 - Hagebeuker, Bianca ED - Grün, Armin T1 - A 3D time of flight camera of object detection T2 - Optical 3-D measurement techniques VIII : applications in GIS, mapping, manufacturing, quality control, robotics, navigation, mobile mapping, medical imaging, cultural heritage, VR generation and animation; papers presented to the conference organized at ETH Zurich, Switzerland, July 9 - 12, 2007. - Vol. 1 Y1 - 2007 SN - 3-906467-67-8 (Gesamtwerk) N1 - Conference on Optical 3-D Measurement Techniques <8, 2007, Zürich> SP - 1 EP - 16 PB - ETH CY - Zürich ER - TY - CHAP A1 - Hagebeuker, Bianca A1 - Ringbeck, Thorsten A1 - Frydlewicz, Paul A1 - Jesorsky, Oliver A1 - Sünkel, Thomas ED - Grote, Caspar T1 - PMD-Sensoren als Schlüsselkomponenten für die mehrdimensionale Umfelderfassung des Fahrzeuginnenraums T2 - Begleittexte zum Entwicklerforum KFZ-Elektronik & FlexRay Solution Day : 15.Mai 2007, Ludwigsburg Y1 - 2007 N1 - Entwicklerforum Kfz-Elektronik <2007, Ludwigsburg> ; FlexRay Solution Day <2007, Ludwigsburg> SP - 287 EP - 296 PB - WEKA-Fachzeitschr.-Verl. CY - Poing ER - TY - CHAP A1 - Reimer, Lars A1 - Braun, Carsten A1 - Chen, B.-H. A1 - Ballmann, Josef T1 - Computational aeroelastic analysis and design of the HIRENASD wind tunnel wing model and tests T2 - Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics : June 18 - 21, 2007, Stockholm, Sweden Y1 - 2007 PB - KTH CY - Stockholm ER - TY - CHAP A1 - Wellmer, Georg A1 - Chen, B.-H. A1 - Braun, Carsten A1 - Ballmann, Josef T1 - Numerical prediction of aeroelastic effects on twin-sting-rig mounted models for rear fuselage and empennage flow investigation in transonic windtunnel T2 - Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics, June 18 - 21, 2007, Stockholm, Sweden Y1 - 2007 PB - KTH CY - Stockholm ER - TY - CHAP A1 - Stepkes, Hermann A1 - Zimmermann, J. A1 - Müller, Karsten A1 - Siekmann, Marko A1 - Pinnekamp, Josef T1 - Economical rehabilitation of sewer systems by ground penetration radar investigations T2 - Strategic asset management of water supply and wastewater infrastructures : invited papers from the 2nd IWA Leading Edge Conference on Strategic Asset Management (LESAM), Lisbon, October [17 - 19] 2007 / ed. by Helene Alegre and Maria do Céu Almeida Y1 - 2007 SN - 9781843391869 SP - 501 EP - 520 PB - IWA Publ. CY - London ER - TY - CHAP A1 - Müller, Karsten T1 - Strategien zur Zustandserfassung von Kanalisationen T2 - Integration in der Abwasserentsorgung : Tagungsband Dresden, 04.10.2007 / Dresdner Kolloquium zur Siedlungswasserwirtschaft / Hrsg.: Peter Krebs. Dresdner Berichte. 29 Y1 - 2007 SP - 39 EP - 50 PB - Inst. für Siedlungs- und Industriewasserwirtschaft CY - Dresden ER - TY - CHAP A1 - Jacobs, Stephan T1 - Verwendung von Netzwerkmustern in der Telekommunikationsindustrie : [Vortragsfolien] T2 - Test Patterns - Intelligente Wiederverwendung von Testware : Software-QS-Tag 2007 ; 08. November 2007, Nürnberg N2 - "[...] Der erste Teil des Vortags konzentriert sich auf die bei Ericsson gemachten Erfahrungen. Welche Muster wurden identifiziert, für welche Tests wurden sie eingesetzt. Wie werden diese Muster verwendet, wie werden sie beschrieben und spezifiziert. Und schließlich, wie entsteht eine Art Standardisierung, in der das Wissen über diese Muster als Organisationswissen zur Verfügung steht. Im zweiten Teil des Vortrags werden die bei Ericsson gemachten Erfahrungen verallgemeinert. Die bei Ericsson verwendeten Muster werden auf allgemeine Strukturen übertragen (z.B. Client-Server). Es wird gezeigt, wie die Zuordnung von Testverfahren auf Netzwerkmuster auch in anderen Domänen verwendet wird und welche Vorteile sich damit erzielen lassen." Quelle: http://www.qs-tag.de/fileadmin/software-qs-tag/public/2007/abstract_jacobs.shtml Y1 - 2007 ER - TY - CHAP A1 - Jacobs, Stephan ED - Bleek, Wolf-Gideon T1 - Towards integration driven design : experience report T2 - Software Engineering 2007 : Beiträge zu den Workshops ; Fachtagung des GI-Fachbereichs Softwaretechnik ; 27. - 30.03.2007 in Hamburg. - (GI-Edition : Proceedings ; 106) Y1 - 2007 SN - 978-3-88579-200-0 SP - 143 EP - 150 PB - Ges. für Informatik CY - Bonn ER - TY - CHAP A1 - Breitbach, Gerd A1 - Alexopoulos, Spiros A1 - Hoffschmidt, Bernhard T1 - Fluid flow in porous ceramic multichannel crossflower filter modules Y1 - 2007 PB - COMSOL Inc. CY - Burlington, Mass. ER - TY - CHAP A1 - Dilthey, Ulrich A1 - Schleser, Markus A1 - Chudoba, Rostislav A1 - Konrad, Martin ED - Triantafillou, T. C. T1 - Experimental investigation and micro-mechanical simulaltion of concrete reinforced with epoxy impregnated fabrics T2 - Fibre-reinforced polymer reinforcement for concrete structures : proceedings of the 8th international conference : Patras, Greece, July 16- 18, 2007 Y1 - 2007 SN - 9608969107 SP - 456 EP - 457 PB - Univ. CY - Patras ER - TY - CHAP A1 - Schleser, Markus A1 - Dilthey, Ulrich A1 - Mund, F. A1 - Böhm, Stefan ED - Czarnecki, Lech ED - Garbacz, Andrzej T1 - Improvement of textile reinforced concrete by use of polymers T2 - Adhesion in interfaces of building materials: a multi-scale approach : [Symposium "Adhesion in Building Bonds: Macro-, Micro- and Nano-Scale" at Warsaw University of Technology in the framework of the European Materials Research Society, fall meeting 2005 ; selected papers]. (Advances in materials science and restoration. No. 2) Y1 - 2007 SN - 978-3-931681-89-0 SP - 153 EP - 162 PB - Aedificatio Publ. CY - Freiburg ER - TY - CHAP A1 - Dilthey, Ulrich A1 - Schleser, Markus A1 - Hegger, Josef A1 - Voss, Stefan ED - Reinhardt, Hans W. T1 - Load-bearing behaviour of polymer-impregnated textiles in concrete T2 - Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53) Y1 - 2007 SN - 978-2-35158-046-2 SP - 183 EP - 192 PB - RILEM Publ. CY - Bagneux ER - TY - CHAP A1 - Dilthey, Ulrich A1 - Schleser, Markus A1 - Puterman, Moshe T1 - Investigation and improvement of concrete reinforced with epoxy impregnated fabrics T2 - Proceedings / 12th International Congress Polymers in Concrete, ICPIC 07, chuncheon, Korea, Sept. 26. - 28., 2007 Y1 - 2007 SN - 978-89-9600450-9 SP - 725 EP - 733 PB - Kangwoon National Univ. CY - Chancheon ER - TY - CHAP A1 - Kuhnhenne, Markus A1 - Feldmann, Markus A1 - Döring, Bernd A1 - Spranger, Sascha T1 - Luftdichtheit im Stahlleichtbau - Gebäudehüllen in Sandwichbauweise T2 - Dichte Gebäudehülle, Thermografie und Wohnungslüftung : 2. Europäisches BlowerDoor-Symposium : 16.3. - 17.3. 2007, Kassel Y1 - 2007 SP - 121 EP - 134 PB - Energie + Umwelt-Zentrum ER - TY - CHAP A1 - Spasov, Yulian A1 - Döring, Bernd A1 - Griffin, Allan T1 - Exploiting the thermal mass in an energy efficient building - a comparison exercise between IES Apache and TRNSYS models T2 - Clima 2007 WellBeing Indoors: 9th Rehva World Congress, 10-14 June 2007, Helsinki, Finland : proceedings Y1 - 2007 SN - 978-952-99898-2-9 SP - 1 EP - 7 CY - Helsinki ER - TY - CHAP A1 - Döring, Bernd A1 - Feldmann, Markus A1 - Kuhnhenne, Markus T1 - An innovative thermally activated light-weight steel deck system - numerical investigations and practical tests T2 - Clima 2007 WellBeing Indoors: 9th Rehva World Congress, 10-14 June 2007, Helsinki, Finland : proceedings Y1 - 2007 SN - 978-952-99898-2-9 SP - 1 EP - 8 CY - Helsinki ER - TY - CHAP A1 - Brandes, Sinja A1 - Gligorevic, Snjezana A1 - Schnell, Michael A1 - Rokitansky, Carl-Herbert A1 - Ehammer, Max A1 - Gräupl, Thomas A1 - Schlereth, Armin A1 - Rihacek, Christoph T1 - Final assessment of the B-VHF overlay concept T2 - IEEE Aerospace Conference : 3-10 March 2007, Big Sky, Mont. Y1 - 2007 SN - 1-4244-0525-4 SP - 1 EP - 18 ER - TY - CHAP A1 - Sajatovic, Miodrag A1 - Rihacek, Christoph A1 - Haindl, Bernhard A1 - Schnell, Michael A1 - Brandes, Sinja A1 - Gligorevic, Snjezana T1 - Broadband VHF (B-VHF) project achievements and follow-on activities T2 - Integrated Communications, Navigation and Surveillance Conference : Herndon, VA, 1 - 3 May 2007 Y1 - 2007 SN - 1-4244-1216-1 SP - 1 EP - 8 ER - TY - CHAP A1 - Rokitansky, Carl-Herbert A1 - Ehammer, Max A1 - Gräupl, Thomas A1 - Schnell, Michael A1 - Brandes, Sinja A1 - Gligorevic, Snjezana A1 - Rihacek, Christoph A1 - Sajatovic, Miodrag T1 - B-AMC a system for future broadband aeronautical multi-carrier communications in the L-BAND T2 - IEEE/AIAA 26th Digital Avionics Systems Conference ; DASC '07 ; 21 - 25 Oct. 2007, Dallas, Texas Y1 - 2007 SN - 978-1-4244-1108-5 SP - 4D2-1 EP - 4D2-13 ER - TY - CHAP A1 - Hellmanns, Mark A1 - Hesse, Joachim T1 - Geräuschminderung und Leichtbau in Leistungsgetrieben durch den Einsatz von Werkstoffverbunden T2 - Hybride Maschinenkonzepte und intelligente Verfahren zur Fertigung von High-Tech-Produkten : Erfolgsbeispiele zur Standortsicherung in Hochlohnländern : InnoNet Kolloquium am 7. und 8.11.2007, Technologiezentrum am Europaplatz Aachen Y1 - 2007 SP - 1 EP - 46 ER - TY - CHAP A1 - Rokitansky, Carl-Herbert A1 - Ehammer, Max A1 - Gräupl, Thomas A1 - Schnell, Michael A1 - Brandes, Sinja A1 - Gligorevic, Snjezana A1 - Rihacek, Christoph A1 - Sajatovic, Miodrag T1 - B-AMC – Aeronautical Broadband Communication in the L-Band T2 - First CEAS European Air and Space Conference : Motto: century perspectives : Deutscher Luft-und Raumfahrtkongress 2007 : 10-13 September 2007 in Berlin, Germany. (Jahrbuch der Deutschen Gesellschaft für Luft- und Raumfahrt 2007 ; Bd. 1-5. - Enth.: Jahrbuch der Deutschen Gesellschaft für Luft- und Raumfahrt 2006 ; Bd. 3) Y1 - 2007 SN - 0070-4083 SP - 487 EP - 496 PB - Deutschen Gesellschaft für Luft- und Raumfahrt CY - Bonn ER - TY - CHAP A1 - Pfaff, Raphael A1 - Pichler, Alexander A1 - George, Alfred A1 - Seiler, Friedrich T1 - Model based image processing for flow visualisation : 16th International Conference on Systems Science, Wroclaw, Poland, September 04 - 06, 2007 T2 - PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620 Y1 - 2007 SP - 1 EP - 10 PB - ISL CY - Saint Louis, France ER - TY - CHAP A1 - Kloock, Joachim P. A1 - Schöning, Michael Josef T1 - Heavy metal detection with semiconductor devices based on PLD-prepared chalcogenide glass thin films T2 - Armenian Journal of Physics Y1 - 2007 SN - 1829-1171 SP - 95 EP - 98 ER - TY - CHAP A1 - Bragard, Michael A1 - Köllensperger, P. A1 - De Doncker, R. W. ED - Dmowski, Antoni T1 - Der Internally Commutated Thyristor (ICT) : ein neuartiger GCT mit integrierter Ausschalteinheit T2 - "Nowoczesne urządzenia zasilające w energetyce" : X międzynarodowa konferencja naukowo techniczna, Zakopane, 14-16 marca 2007 r. : materiały konferencyjne Y1 - 2007 SN - 83-918709-7-9 SP - 7.1 EP - 7.9 PB - APS Energia CY - Warszawa ER - TY - CHAP A1 - Köllensperger, P. A1 - Bragard, Michael A1 - Plum, T. A1 - De Doncker, R. W. T1 - The dual GCT : a new high-power device using optimized GCT technology T2 - Conference record of the 2007 IEEE Industry Applications Conference : 42. IAS annual meeting ; September 23 - 27, 2007, New Orleans, Louisiana, USA Y1 - 2007 SN - 978-1-4244-1260-0 (Online) SN - 978-1-4244-1259-4 (Print) U6 - http://dx.doi.org/10.1109/07IAS.2007.76 SP - 358 EP - 365 PB - IEEE Operations Center CY - Piscataway, NJ ER - TY - CHAP A1 - Tran, Thanh Ngoc A1 - Staat, Manfred A1 - Kreißig, R. T1 - Calculation of load carrying capacity of shell structures with elasto-plastic material by direct methods N2 - Proceedings of the International Conference on Material Theory and Nonlinear Dynamics. MatDyn. Hanoi, Vietnam, Sept. 24-26, 2007, 8 p. In this paper, a method is introduced to determine the limit load of general shells using the finite element method. The method is based on an upper bound limit and shakedown analysis with elastic-perfectly plastic material model. A non-linear constrained optimisation problem is solved by using Newton’s method in conjunction with a penalty method and the Lagrangean dual method. Numerical investigation of a pipe bend subjected to bending moments proves the effectiveness of the algorithm. KW - Finite-Elemente-Methode Y1 - 2007 ER - TY - CHAP A1 - Fredebeul-Krein, Markus T1 - 10 years of liberalised telecom markets in Germany: Assessing the degree of competition on the markets for voice telephony N2 - Market data for the German telecom market shows that Deutsche Telekom as the former incumbent is constantly loosing shares on all arkets for voice telephony: the market for local calls, the market for long-distance calls and the market for international calls. At the same time prices decline steadily with the latest trend being that operators offer voice services free of charge, the costs of which are covered by a monthly subscription charge. Against this background the paper examines the state of policy and regulatory reform in the telecommunications sector in Germany almost 10 years after the liberalisation of the fixed telecommunications market. Thereby the focus is on the analysis of the competitive conditions that have been established on the German market for voice telephony services. If these retail markets are competitive, there might be a need to remove remaining regulatory provisions. In the new environment of converging markets the future challenge of regulating fixed telecom markets might be to ensure that access to the network and/or services of a potentially dominant provider in a relevant market will satisfy requirements for openness and non-discrimination. KW - Telekommunikationsmarkt KW - Telekommunikationsmarkt Y1 - 2007 N1 - paper presented at 18th European Regional ITS Conference of the International Telecommunications Society, September 2-4, 2007 Istanbul, Turkey ER - TY - CHAP A1 - Fredebeul-Krein, Markus T1 - 10 Jahre Wettbewerb auf dem deutschen Telekommunikationsmarkt: Zeit für einen Paradigmenwechsel in der Regulierung? N2 - 1. Ein Referenzrahmen für die Wettbewerbsanalyse 2. Regulierung des deutschen Marktes für Sprachtelefondienste 3. Wettbewerb auf dem deutschen Markt für Sprachtelefondienste 4. Die Telekommunikationsregulierung vor einem Paradigmenwechsel KW - Telekommunikationsmarkt KW - Telekommunikationsmarkt Y1 - 2007 N1 - Vortrag auf dem TEC ER - TY - CHAP A1 - Tran, Thanh Ngoc A1 - Staat, Manfred A1 - Kreißig, R. T1 - Finite element shakedown and limit reliability analysis of thin shells N2 - A procedure for the evaluation of the failure probability of elastic-plastic thin shell structures is presented. The procedure involves a deterministic limit and shakedown analysis for each probabilistic iteration which is based on the kinematical approach and the use the exact Ilyushin yield surface. Based on a direct definition of the limit state function, the non-linear problems may be efficiently solved by using the First and Second Order Reliabiblity Methods (Form/SORM). This direct approach reduces considerably the necessary knowledge of uncertain technological input data, computing costs and the numerical error. In: Computational plasticity / ed. by Eugenio Onate. Dordrecht: Springer 2007. VII, 265 S. (Computational Methods in Applied Sciences ; 7) (COMPLAS IX. Part 1 . International Center for Numerical Methods in Engineering (CIMNE)). ISBN 978-1-402-06576-7 S. 186-189 KW - Finite-Elemente-Methode KW - Limit analysis KW - shakedown analysis KW - Exact Ilyushin yield surface KW - Random variable KW - First Order Reliabiblity Method Y1 - 2007 ER - TY - CHAP A1 - Weßling, Matthias T1 - Leadership Perspectives: Research Findings, Theories, Practical Experiences N2 - Leadership Perspectives: Research Findings, Theories, Practical Experiences: Results of Leadership Research and exemplarily application cases show the perspectives and consequences for leadership practice and the following requirements for executives in future. N2 - Leadership Perspectives: Research Findings, Theories, Practical Experiences: Bisherige Ergebnisse der betriebswirtschaftlichen Führungsforschung und exemplarische Anwendungsbeispiele der Führungspraxis, sowie die Schlußfolgerungen für die Perspektiven der betrieblichen Mitarbeiterführung sowie die sich daraus ergebenden Anforderungen an zukünftige Führungskräfte. KW - Leadership KW - Führung KW - Führungsansätze KW - Leadership KW - Self-Leadership KW - Leadership Approaches KW - Skill Assessment KW - Leadership Theories Y1 - 2007 ER - TY - CHAP A1 - Weßling, Matthias T1 - Motivation and Leadership - The Reiss-Profile of the 16 Basic Desires: Research results and managerial applications N2 - Recent Results of the scientific Reiss-Profile (16 basic desires) due to the concept of Prof. Dr. Steven Reiss (State University Ohio, U.S.A.), supplemented by the comparative analysis of empirical motivational profiles of european executives of various companies. N2 - Neuere Forschungsergebnisse des wissenschaftlichen Reiss-Profils der 16 Lebensmotive nach Prof. Dr. Steven Reiss (State University Ohio, U.S.A.) und die Möglichkeiten und Grenzen ihrer Umsetzung in der betrieblichen Führungspraxis unter Integration der vergleichenden Analyse und Interpretation empirisch erhobener Motivprofile einzelner europäischer Führungskräfte. KW - Motivation KW - Leadership KW - Motivation KW - Führung KW - Motivation KW - Leadership Y1 - 2007 ER - TY - CHAP A1 - Weßling, Matthias T1 - Provocative Communication in Coaching and Leadership: scientific research and managerial applications of the Provocative Communication Style N2 - Concept, scientific research and managerial applications of Provocative Coaching, according to the „Provocative Therapy“ of Prof. Dr. Frank Farrelly (University of Wisconsin, U.S.A) in terms of an application of the Provocative Communication Style in specific situations of practical leadership, especially in the role of a coach for their subordinates. N2 - Konzept, Forschungsergebnisse und Tools der sogenannten „Provocative Therapy“ nach Prof. Dr. Frank Farrelly (University of Wisconsin, U.S.A) und ihre Anwendung als provokativer Kommunikationsstil einer Führungskraft in spezifischen Situationen der betrieblichen Führungspraxis in der Rolle eines Coaches. KW - Kommunikation KW - Coaching KW - Führung KW - Kommunikation KW - Coaching KW - Führung KW - Provokativer Stil KW - Provocative Coaching KW - Leadership KW - Communication KW - Provocative Style Y1 - 2007 ER - TY - CHAP A1 - Wollert, Jörg T1 - Mobility - Integration von Offboard-Devices in Fahrzeugen T2 - Begleittexte zum Entwicklerforum Kfz-Elektronik & FlexRay Solution Day : 15. Mai 2007, Ludwigsburg / hrsg. von Caspar Grote ... Y1 - 2007 SP - 47 EP - 54 PB - Design & Elektronik CY - Poing ER - TY - CHAP A1 - Wollert, Jörg T1 - Fahrzeug-Umwelt Kommunikation? Chancen und Herausforderungen T2 - Begleittexte zum Entwicklerforum Kfz-Elektronik & FlexRay Solution Day : 15. Mai 2007, Ludwigsburg / hrsg. von Caspar Grote ... Y1 - 2007 SP - 39 EP - 46 PB - Design & Elektronik CY - Poing ER - TY - CHAP A1 - Vedral, Andreas A1 - Kruse, Thomas A1 - Wollert, Jörg T1 - Development and performance evaluation of an antenna diversity module for industrial communication based on IEEE 802.15.4 T2 - 12th IEEE International Conference on Emerging Technologies and Factory Automation : ETFA 2007 : proceedings : 25-28 Sept. 2007, Patras, Greece Y1 - 2007 SN - 1424408261 ; 9781424408269 U6 - http://dx.doi.org/10.1109/EFTA.2007.4416769 SP - 177 EP - 186 PB - IEEE CY - Piscataway, NJ ER - TY - CHAP A1 - Buda, Aurel A1 - Vredal, Andreas A1 - Wollert, Jörg ED - Wollert, Jörg T1 - Einfache Integration von funkgestützten Kommunikationssystemen in der Automation T2 - Wireless Technologies : 9. Kongress, 18. - 19. September 2007, Stuttgart ; von der Technologie zur Anwendung Y1 - 2007 SN - 978-3-89838-084-3 SP - 189 EP - 198 PB - Aka CY - Berlin ER - TY - CHAP A1 - Buda, Aurel A1 - Jozenfini, B. A1 - Wollert, Jörg T1 - Mobile ad-hoc Network for home automation based on ZigBee application framework T2 - 1st European ZigBee Developer's Conference : June 18 - 20, 2007, Munich, Germany Y1 - 2007 SP - 1 EP - 5 PB - Design & Elektronik CY - Poing ER - TY - CHAP A1 - Kirsch, Ansgar A1 - Blioumi, A. A1 - Fellin, Wolfgang A1 - Kolymbas, Dimitrios T1 - Modelling anisotropic squeezing as a process in time T2 - ECCOMAS Thematic Conference on Computational Methods in Tunneling ; August 27 - 29, 2007, Vienna, Austria : EURO:TUN 2007 : proceedings Y1 - 2007 SN - 3-9501554-7-3 ; 978-3-9501554-7-1 CY - Wien ER - TY - CHAP A1 - Kirsch, Ansgar A1 - Kolymbas, Dimitrios A1 - Fellin, Wolfgang T1 - Modellierung von druckhaftem anisotropem Fels T2 - 6. Österreichische Geotechniktagung : mit "Vienna - Terzaghi Lecture" ; Tagungsbeiträge 18. und 19. Jänner 2007 / Österreichischer Ingenieur- und Architekten-Verein Y1 - 2007 SN - 978-3-902450-58-6 SP - 487 EP - 498 CY - Wien ER - TY - CHAP A1 - Butenweg, Christoph T1 - Nachweis der Erdbebensicherheit von Silos aus Stahl unter Erdbebenbelastung T2 - D-A-CH Tagung 2007 : Aktuelle Themen des Erdbebeningenieurwesens und der Baudynamik ; 27. und 28. September 2007, arsenal research, TECHbase Vienna Y1 - 2007 SP - 1 EP - 14 ER - TY - CHAP A1 - Tippkötter, Nils A1 - Stückmann, H. A1 - Winkelmann, G. A1 - Noack, U. A1 - Beutel, S. A1 - Scheper, T. A1 - Ulber, R. T1 - Optimisation of antibody-labelling of gold colloids for their application in an immunchromatographic assay for microcystin-LR T2 - European BioPerspectives : celebrating the 25th DECHEMA annual convention of biotechnologists ; 30 May - 1 June 2007, Cologne, Germany ; book of abstracts ; abstracts, poster programme Y1 - 2007 SP - 126 PB - Dechema CY - Frankfurt am Main ER -